--- /dev/null
--- /dev/null
++# README for Debian package maintainers
++
++This document complements README.source.md with additional information relevant
++only the the maintainer.
++
++### Ensuring git contents match what has been uploaded to Debian/Ubuntu
++
++It is possible (but extremely rare) that somebody uploads a MariaDB package to
++Debian/Ubuntu and either does not use git at all, or simply forgets to push the
++same changes on git, or makes an error in tagging the release or something.
++Therefore, maintainers should check that the git contents match what has been
++uploaded to Debian/Ubuntu before making new changes on git.
++
++This can be done by using dgit. The example command below will fetch the latest
++mariadb package available in Ubuntu 24.04 (Noble) base archive, security archive
++or updates archive (whichever has a newer version):
++
++ dgit -d ubuntu clone mariadb noble,-security,-updates
++ cp -ra mariadb/* .
++ rm -rf mariadb
++
++You can then compare these two directories with a recursive diff or `git diff`.
++
++
++Another option is to manually check on packages.debian.org or packages.ubuntu.com
++what is the latest version, and download and extract it on top of the existing
++debian/ directory with:
++
++ curl -SL https://launchpad.net/ubuntu/+archive/primary/+sourcefiles/mariadb-10.6/\
++ 1:10.6.7-2ubuntu1.1/mariadb-10.6_10.6.7-2ubuntu1.1.debian.tar.xz -o - | tar xv --xz
++
++You can simply run `git diff` to see the report on differences.
++
++## Upstream release information
++
++Upstream will publish maintenance releases at least 5 years after the major
++version release, and security updates are likely to come even after that as
++long as major distributions ship the version.
++
++See table at
++https://mariadb.com/kb/en/mariadb/development/mariadb-maintenance-policy/
++
++Release notes are available at
++https://mariadb.com/kb/en/mariadb/development/release-notes/
++
++## Comparing to upstream Debian packaging changes
++
++After importing a new upstream version, it is good to review Debian packaging
++fixes done by upstream:
++
++ git difftool --dir-diff upstream/latest -- debian/
++ git log --oneline --first-parent 11.4 -- debian/
++ git cherry-pick -x id1 id2 id3
++
++## Maintaining translations
++
++Running `debconf-updatepo --verbose` will refresh the translation files.
++
++A call for translations can be initiated with e.g. `podebconf-report-po --call -v --smtp=smtp.kolumbus.fi`.
++
++### Launchpad testing matrix
++
++Since Launchpad only has Ubuntu releases, packages for specific Debian releases
++needs to be tested on the Ubuntu release which most closely matches the Debian
++release in question. The following matrix maps what package should be tested
++where:
++
++- 11.4 for sid on Launchpad oracular
++- 10.11 for noble on Launchpad noble
++- 10.6 for jammy on Launchpad jammy
++- 10.5 for bullseye on Launchpad hirsute (not available anymore)
++
++## Uploading security releases to Debian
++
++After you've got permission from the security team, upload with `dput security-master *.changes`.
++
++For details see https://www.debian.org/doc/manuals/developers-reference/pkgs.html#bug-security
++
++## Uploading security releases to Ubuntu
++
++See example with documented procedure:
++ * https://bugs.launchpad.net/ubuntu/+source/mariadb/+bug/2067125
++
++### Upload priority
++
++Do the security uploads in this order for having the best chance of catching
++regressions before they spread out to too many users.
++
++Upload priority for 11.4
++- debian-13 trixie
++- ubuntu-24.10 oracular
++
++Upload priority for 10.11
++- debian-12 bookworm
++- ubuntu-24.04 noble
++
++Upload priority for 10.6
++- ubuntu-22.04 jammy
++
++Upload priority for 10.5
++- debian-11 bullseye
++
++
++## Comparison to other distributions
++
++For tracking security release information, finding solutions for build errors
++on many architectures and for general quality control it can be useful to keep
++an eye on what packagers in other distributions do:
++
++Fedora:
++ * https://apps.fedoraproject.org/packages/mariadb/
++ * http://pkgs.fedoraproject.org/cgit/mariadb.git/
++OpenSUSE:
++ * https://build.opensuse.org/package/show/server:database/mariadb
++Arch Linux:
++ * https://projects.archlinux.org/svntogit/packages.git/?h=packages/mariadb
++Mageia:
++ * http://svnweb.mageia.org/packages/cauldron/mariadb/current/
++
++See also: https://repology.org/project/mariadb/badges
--- /dev/null
--- /dev/null
++# README for Debian package maintainers and contributors
++
++This documentation describes how to contribute to the official Debian and Ubuntu
++packages of MariaDB. The packaging in Debian repositories is not identical to
++the packaging in mariadb.org repositories, but whatever is in Debian
++repositories will eventually be upstreamed.
++
++
++## Git repository structure
++
++This Debian packaging source code in directory `debian/` is maintained on branch
++`debian/latest` (naming following DEP-14) as part of a fork of the upstream
++repository. This structure is compatible with git-buildpackage and is
++preconfigured with `debian/gbp.conf` so the git-buildpackage commands don't need
++extra parameters most of the time.
++
++To understand what each git-buildpackage command in this README exactly does,
++run them with `--verbose` and read the respective man pages for details.
++
++
++## Getting the Debian packaging source code
++
++To get the Debian packaging source code and have the upstream remote alongside
++it, simply run:
++
++ gbp clone vcs-git:mariadb --add-upstream-vcs
++
++Alternatively, run this to define precisely one upstream branch to be tracked:
++
++ gbp clone vcs-git:mariadb \
++ --postclone="git remote add -t 11.4 -f upstreamvcs https://github.com/MariaDB/server.git"
++
++Using the `vcs-git:`prefix will automatically resolve the git repository
++location, which for most packages is on salsa.debian.org. To build the package
++one needs all three Debian branches (`debian/latest`, `upstream/latest`and
++`pristine-tar`). Using `gbp clone` and `gbp pull` ensures all three branches are
++automatically fetched.
++
++The command above also automatically adds the upstream repository as an extra
++remote, and fetches the latest upstream `11.4` branch commits and tags. The
++upstream development branch is not a requirement to build the Debian package,
++but is recommended for making collaboration with upstream easy.
++
++The repository structure and use of `gbp pq` makes it easy to cherry-pick
++commits between upstream and downstream Debian, ensuring improvements downstream
++in Debian and upstream in the original project are shared frictionlessly.
++
++
++## Updating an existing local git repository
++
++If you have an existing local repository created in this way, you can update it
++by simply running:
++
++ gbp pull
++
++The above does not pull the upstreamvcs remote, so additionally run:
++
++ git pull --all --verbose
++
++The recommended tool to inspect what branches and tags you have and what their
++state is on various remotes is:
++
++ gitk --all &
++
++
++## Contributing to the Debian packaging
++
++First clone the Debian packaging repository using git-buildpackage as described
++above. Then open https://salsa.debian.org/mariadb-team/mariadb-server and press
++"Fork". This is needed for Salsa to understand that your repository has the same
++origin. In your fork, note the git SSH address, e.g.
++`git@salsa.debian.org:otto/mariadb-server.git`, and add it as new remote (replace
++'otto' with your own Salsa username):
++
++ git remote add otto git@salsa.debian.org:otto/mariadb-server.git
++
++Alternatively you can do this fully from the command line with:
++
++ salsa fork debian/mariadb-server --verbose
++
++Do your code changes, commit and push to your repository:
++
++ git checkout -b bugfix/123456-fix-something
++ git commit # or `git citool`
++ git push --set-upstream otto
++
++If made further modifications, and need to update your submission, run:
++
++ git commit -a --amend # or `git citool --amend`
++ git push -fv
++
++Finally open a Merge Request on salsa.debian.org. If your submission is high
++enough quality, the maintainer is likely to approve it and include your
++improvement in the revision of the Debian package. The link to open an MR will
++automatically display on the command-line after each `git push` run.
++
++There is no need to update the `debian/changelog` file in the commit. It will be
++done automatically by the maintainer before next upload to Debian. There is also
++no need to submit multiple Merge Requests targeting different branches with the
++same change. Just submit the change for the `debian/latest` branch, and the
++maintainer will cherry-pick it to other branches as needed.
++
++The Debian packaging repository will only accept changes in the `debian/`
++subdirectory. Any fix for upstream code should be ideally contributed directly to
++upstream and carried in Debian alone only in special cases.
++
++
++## Adding a patch to the Debian packaging
++
++The Debian packaging consists of the pristine upstream source code combined with
++the `debian/` subdirectory where all Debian packaging code resides. As the
++upstream source code needs to stay untouched, so any modification of upstream
++code must be done as a patch in the `debian/patches/` subdirectory, which is
++then applied on upstream source code at build-time.
++
++Instead of manually fiddling with patch files, the recommended way to update
++them is using `gbp pq`. Start by switching to the temporary patches-applied
++branch by running:
++
++ gbp pq switch --force
++ # Make changes, build, test
++ git commit --all --amend # or `git citool --amend`
++
++If your terminal prompt shows the git branch, you will see it change from e.g.
++`debian/latest` to `patch-queue/debian/latest`. On this branch do whatever
++modification you want. You may also use `git cherry-pick -x` to pick upstream
++commits, and have their origin automatically annotated.
++
++While still on this branch, build the sources and Debian package and test that
++everything works. When done, convert the commit to a correctly formatted
++patch file by running:
++
++ gbp pq export --drop --commit
++ git commit --amend # or `git citool --amend` to write actual details
++
++If your terminal prompt shows the git branch, you will see it have changed back
++to `debian/latest`. The updates you committed in `debian/patches/...` can be
++sent as a Merge Request on Salsa to the Debian package. The commit done on the
++`patch-queue/debian/latest` can be sent upstream as-is.
++
++
++## Contributing upstream
++
++This Debian packaging repository and the upstream git repository can happily
++co-exist as separate branches in the same git repository. To contribute
++upstream, start by opening the upstream project GitHub page, press "Fork" and
++add it as yet another git remote to this repository just like in the section
++above.
++
++Make git commits, or cherry-pick a commit that is already on a `gbp pq` branch,
++push them to your GitHub fork and open a Pull Request on the upstream
++repository.
++
++
++## Download upstream release tarball, and import using both git tag and tarball
++
++To check for new upstream releases run:
++
++ git fetch --verbose upstreamvcs
++ # Note latest release tag, e.g. 11.4.5
++ # Download upstream release tarball, and merge using both git tag and tarball
++ gbp import-orig --uscan
++ gbp dch --distribution=UNRELEASED \
++ --commit --commit-msg="Update changelog and refresh patches after %(version)s import" \
++ -- debian
++ # Add 'New upstream version' to changelog if it didn't go there automatically
++ # Import latest debian/patches on previous version so it can be rebased on latest
++ gbp pq import --force --time-machine=10
++ git rebase -i debian/latest
++ gbp pq export --drop
++ git commit --all --amend # or `git citool --amend` to write actual details
++ # Note: remember to manually strip '1:' and '-1' from commit message title as
++ # the '%(version)s' output is the Debian version and not upstream version!
++
++If the upstream version is not detected correctly, you can pass to `gbp dch` the
++extra parameter `--new-version=11.4.5`.
++
++If rebasing the patch queue causes merge conflicts, run `git mergetool` to
++visually resolve them. You can also browse the upstream changes on a particular
++file easily with `gitk path/to/file`.
++
++When adding DEP3 metadata fields to patches, put them as the last lines in the
++git commit message on the `pq` branch. In the `debian/patches/*`files the
++first three lines need to be exactly `From`, `Date` and `Subject`,
++just like in `git am` managed patches.
++
++Remember that if you did more than just refreshed patches, you should save those
++changes in separate git commits. Remember to build the package, run autopkgtests
++and conduct other appropriate testing. For git-buildpackage the basic command is:
++
++ gbp buildpackage
++
++Alternatively you can use Debcraft and run git-buildpackage inside hermetic
++containers created by it:
++
++ debcraft validate
++ debcraft build
++ debcraft test
++
++You can also do manual testing and run `apt install <package>` in a `debcraft
++shell` session. Rinse and repeat until the Debian packaging has been properly
++updated in response to the changes in the new upstream version.
++
++After testing enough locally, push to your fork and open Merge Request on Salsa
++for review (replace 'otto' with your own Salsa username):
++
++ gbp push --verbose otto
++
++Note that git-buildpackage will automatically push all three branches
++(`debian/latest`, `upstream/latest` and `pristine-tar`) and upstream tags to
++your fork so it can run the CI. However, merging the MR will only merge one
++branch (`debian/latest`) so the Debian maintainer will need to push the other
++branches to the Debian packaging git repository manually with `git push`. It is
++not a problem though, as the upstream import is mechanical for the
++`upstream/latest` and `pristine-tar` branches and thus not a topic to be debated
++ in a code review. Only the `debian/latest` branch has changes that warrant
++ a review and potentially new revisions.
++
++
++## Uploading a new release
++
++**You need to be a Debian Developer to be able to upload to Debian.**
++
++Before the upload, remember to ensure that the `debian/changelog` is
++up-to-date:
++
++ gbp dch --release --commit
++
++Create a source package with your preferred tool. In Debcraft, one would issue:
++
++ debcraft release
++
++Do the final checks and sign and upload with:
++
++ debsign *.changes
++ dput ftp-master *.changes
++
++After upload remember to monitor your email for the acknowledgement email from
++Debian systems. Once the upload has been accepted, remember to run:
++
++ gbp tag --verbose
++ gbp push --verbose
++
++
++## Building the packages
++
++The easiest way to build this package is in a Debian sid (unstable) container.
++Example commands:
++
++ podman run --interactive --network host --tty --rm --shm-size=1G --volume=$PWD:/tmp/build --workdir=/tmp/build debian:sid bash
++
++This will start a session, where you are as the root user in the path
++`/tmp/build` inside the container. Here you can `cd` into the source directory,
++install dependencies and start the build. Note that when you exit the session,
++everything will be lost apart from the files you had inside the mounted volume
++in `/tmp/build`.
++
++ cd <source directory>
++ mk-build-deps -r -i debian/control -t "apt-get -y -o Debug::pkgProblemResolver=yes --no-install-recommends"
++ gbp buildpackage
++
++If the build fails, the easiest way to clean up before a new run is
++
++ git clean -fdx && git reset --hard
++
++
++### Build options
++
++If you want to skip the mysql-test-run step (which takes a lot of time) set
++the following environment variable:
++
++ export DEB_BUILD_OPTIONS="nocheck"
++
++If you want to run the build in parallel on 2 CPUs and have verbose output:
++
++ export DEB_BUILD_OPTIONS="parallel=2 verbose"
++
++The options above can also be combined freely to get desired behavior.
++
++
++# Quality assurance tips
++
++Ensure most packaging files are formatted correctly:
++
++ wrap-and-sort -vast
++
++Check man pages for syntax errors:
++
++ LC_ALL=en_US.UTF-8 MANROFFSEQ='' MANWIDTH=80 man --warnings -E UTF-8 -l -Tutf8 -Z mariadb.1 >/dev/null
++
++Find spelling errors:
++
++ find * -type f | xargs spellintian
++
++
++# Debugging tips
++
++## Debug mariadb-test-run failures
++
++If the test suite is failing on Launchpad or some other CI system where you
++don't have access to the build artifacts, you can extend the debian/rules file
++to print out valuable information with the commands:
++
++ cd $(BUILDDIR)/mysql-test && find var/log/ -ls || true
++ cd $(BUILDDIR)/mysql-test && cat var/log/*.err || true
++ cd $(BUILDDIR)/mysql-test && tail -n 1000 var/log/*.log || true
++
++The `cd` is required on every line since it is a Makefile and the actual command
++needs to run in the correct directory. Also, the `|| true` at the end ensures
++the build will complete and not abort if any of those debug steps fail.
++
++## Debugging with gdb
++
++If the `mariadb-test-run` fails on a `mariadbd` crash it should produce a core
++dump file, from which a full stack trace can be produced with:
++
++ cd $(BUILDDIR)/mysql-test && gdb --batch --ex 'thr a a bt' var/log/*/mysqld.1/core || true
++
++To attach `gdb` on a running process and get a stack trace run:
++
++ gdb -p $(pgrep -x mariadbd) /usr/sbin/mariadbd
++ set height 0
++ set logging file /tmp/mysqld.log
++ set logging on
++ thread apply all backtrace full
++
++The readability of the stack traces depends on if symbols are available on the
++system. In Debian and Ubuntu all (C/C++) software is automatically built with
++debug symbols, but to save disk space they are distributed in separate packages
++(usually with `-dbg` or `-dbgsym` suffix) which users need to install in the
++rare case stack traces are needed. See the Debian and Ubuntu documentation on
++how to enable the repository that has the debug symbol packages.
++
++* https://wiki.ubuntu.com/Debug%20Symbol%20Packages
++* https://wiki.debian.org/HowToGetABacktrace
++
++## Debug build
++
++A debug build can be created using the following build flags:
++
++ -DCMAKE_BUILD_TYPE=Debug \
++ -DMYSQL_MAINTAINER_MODE=OFF \
++
++The latter flag ensures a build does not stop on warnings but continues to the
++end.
++
++A 'mariadbd' binary from a debug build can be started with argument '--debug' to
++be verbose about what is going on in the server. Debug binaries should not be
++used in production as they are slower than normal binaries.
++
++Core dumps and stack traces can be produced on any build running with
++`--core-file --stack-trace` and *debug builds are not needed to run `gdb`*.
++
++## Debugging a running server
++
++Linux distros come standard with tools like `strace` and `lsof` which can also
++be used to inspect what processes are doing (no need for debug build). For
++example to see what `mariadbd` is writing to the database files can be viewed
++with:
++
++ strace -ffp $(pgrep -x mariadbd) -e pwrite,write,fsync,fdatasync,sync,send,sendto,sendmsg
++ lsof -a -p $(pgrep -x mariadbd) | grep "/var/lib/mysql"
++
++## Compare changes between builds
++
++Diffoscope can be used to investigate small changes between recent builds:
++
++ docker run --rm -t -w $(pwd) -v $(pwd):$(pwd) registry.salsa.debian.org/reproducible-builds/diffoscope --html-dir report mariadb-server-1.deb mariadb-server-2.deb
++ firefox report/index.html
++
++## Test autopkgtest locally
++
++If Debian CI fails (or Ubuntu CI) one might need to debug the autopkgtests
++manually. The easiest way to do it is to start a Docker container that has
++access to the packaging source directory via a local mount:
++
++ laptop$ docker run -it -v ${PWD}:/build -w /build debian:sid bash
++ container$ apt update && apt install -y autopkgtest
++ container$ autopkgtest --no-built-binaries --shell-fail -- null
++
++Edit the files in `debian/tests` in your favorite code editor and re-run the
++`autopkgtest -- null` until the tests are passing. When the autopkgtests work
++the container can be shut down and the valid `debian/tests` committed in git.
++
++If you want to iterate on a single test, use `--test-name`, e.g.
++`autopkgtest --no-built-binaries --test-name=configuration-tracing -- null`.
++
++If you don't want to use the MariaDB binaries from Debian Sid but instead build
++them from the source tree to be used in autopkgtest directly, simply omit
++`--no-built-binaries` from the `autopkgtest` command.
++
++For more information please read:
++* https://manpages.debian.org/unstable/autopkgtest/autopkgtest.1.en.html
++* https://salsa.debian.org/ci-team/autopkgtest/-/tree/master/doc
++
++## Debug installation/upgrade
++
++To see what exactly the Debian maintainer scripts run, they can be made verbose with:
++
++ export DEBIAN_SCRIPT_DEBUG=1
++ apt install ...
++
++The source files of the Debian maintainer scripts are not the final ones, as the
++package building stage may make changes and additions to them. To view a
++maintainer script in the final form on an installed system run:
++
++ cat /var/lib/dpkg/info/mariadb-server.postinst
++
++To review the my.cnf status run:
++
++ find /etc/mysql/ -ls
++ update-alternatives --display my.cnf
++
++## Debug apt Depends/Conflicts/Breaks
++
++It can be quite frustrating to debug situations where `apt` (or `apt-get`) fails
++on an install or upgrade with an error message like:
++
++ The following packages have unmet dependencies:
++ mariadb-client : Depends: mariadb-client-10.5 but 1:10.5.12 is to be installed
++ mariadb-server : Depends: mariadb-server-10.5 but 1:10.5.12 is to be installed
++ mariadb-test : Depends: mariadb-client-10.5 but 1:10.5.12 is to be installed
++ Depends: mariadb-server-10.5 but 1:10.5.12 is to be installed
++ E: Unable to correct problems, you have held broken packages.
++
++To make apt show debug information on what it tried to resolve and how it failed
++enable debug features by adding a file in `/etc/apt/apt.conf.d/` with:
++
++ Debug::pkgProblemResolver 1;
++ Debug::pkgDepCache::AutoInstall 1;
++ Debug::pkgDepCache::Marker 1;
++
++>lternatively append options directly to `apt` commands:
++
++ apt dist-upgrade -o Debug::pkgProblemResolver=1
++
++It can be also quite annoying to rebuild the entire package to debug small
++changes in the `debian/control` file. To have a much faster change->test->change
++cycle one can simply instruct `apt` to use a custom `Packages` file to read the
++`control` data.
++
++First ensure `apt` forgets all repositories:
++
++ rm /etc/apt/sources.list
++ apt clean
++ apt update
++
++Download a Packages file for so it can be edited:
++
++ curl -O http://ftp.debian.org/debian/dists/sid/main/binary-amd64/Packages.xz
++ unxz Packages.xz
++ cp Packages Packages.orig
++
++Open the file in an editor, scroll down to the MariadB packages and make any
++changes you want and then test them:
++
++ nano Packages
++ apt install --with-source ./Packages -s mariadb-server -o Debug::pkgDepCache::Marker=1 -o Debug::pkgDepCache::AutoInstall=1 -o Debug::pkgProblemResolver=1
++
++The example uses maximum verbosity but it is naturally not mandatory. When the
++solution has been found, compare to the original and transfer the changes into
++the actual debian/control in the MariaDB packaging:
++
++ diff -u Packages.orig Packages
++
++## Test install/upgrade with local package repository
++
++Normally the fastest way to test that the built *.deb files install and upgrade
++properly is simply to run `apt` directly on them inside a container that has
++access to the .deb files via a local mount:
++
++ laptop$ docker run -it -v ${PWD}:/build -w /build debian:sid bash
++ container$ apt update && apt install ./*.deb
++
++Some bugs however occur only when apt does various dependency resolving and can
++only be tested with an installation from an actual apt repository. The fastest
++way to get a directory with deb files served via a local repository is to run:
++
++ apt install apt-utils
++ apt-ftparchive packages . > Packages
++ apt-ftparchive release . > Release
++ echo 'deb [trusted=yes] file:/build/mariadb-bionic ./' >> /etc/apt/sources.list
++ apt update
++ apt install mariadb-server
++
++The example above assumes that the .deb files are in path `/build`.
++
++## Check Breaks/Replaces
++
++MariaDB is not only a massive package by itself, it also has several parallel
++major releases at any given time and also other variants (MySQL, Percona Server)
++the packaging might interact with.
++
++The standard Salsa-CI pipeline checks Breaks/Replaces for what is currently in
++the Debian repositories, but to check Breaks/Replaces across all known
++repositories one needs to run:
++
++ docker run -it -v ${PWD}:/build -w /build debian:sid bash
++ apt update
++ apt install --yes devscripts python3-junit.xml apt-file
++ cat > /etc/apt/apt.conf.d/99ignore-keys <<EOF
++ APT::Get::AllowUnauthenticated "true";
++ Acquire::AllowInsecureRepositories "true";
++ Acquire::AllowDowngradeToInsecureRepositories "true";
++ Acquire::Check-Valid-Until "false";
++ Acquire::Check-Date "false";
++ EOF
++ cat > /etc/apt/sources.list.d/mariadb.list <<EOF
++ deb http://deb.debian.org/debian trixie main
++ deb http://deb.debian.org/debian bookworm main
++ deb http://deb.debian.org/debian bullseye main
++ deb http://archive.debian.org/debian buster main
++ deb http://archive.debian.org/debian stretch main
++ deb http://archive.debian.org/debian jessie main
++ deb http://archive.ubuntu.com/ubuntu/ plucky main restricted universe multiverse
++ deb http://archive.ubuntu.com/ubuntu/ oracular main restricted universe multiverse
++ deb http://archive.ubuntu.com/ubuntu/ noble main restricted universe multiverse
++ deb http://archive.ubuntu.com/ubuntu/ jammy main restricted universe multiverse
++ deb http://archive.ubuntu.com/ubuntu/ focal main restricted universe multiverse
++ deb http://archive.ubuntu.com/ubuntu/ bionic main restricted universe multiverse
++ deb http://archive.ubuntu.com/ubuntu/ xenial main restricted universe multiverse
++ deb http://archive.ubuntu.com/ubuntu/ trusty main restricted universe multiverse
++ deb https://archive.mariadb.org/mariadb-11.8/repo/debian bookworm main
++ deb https://archive.mariadb.org/mariadb-11.7/repo/debian bookworm main
++ deb https://archive.mariadb.org/mariadb-11.6/repo/debian bookworm main
++ deb https://archive.mariadb.org/mariadb-11.5/repo/debian bookworm main
++ deb https://archive.mariadb.org/mariadb-11.4/repo/debian bookworm main
++ deb https://archive.mariadb.org/mariadb-11.3/repo/debian bookworm main
++ deb https://archive.mariadb.org/mariadb-11.2/repo/debian bookworm main
++ deb https://archive.mariadb.org/mariadb-11.1/repo/debian bookworm main
++ deb https://archive.mariadb.org/mariadb-11.0/repo/debian bookworm main
++ deb https://archive.mariadb.org/mariadb-10.11/repo/debian bullseye main
++ deb https://archive.mariadb.org/mariadb-10.10/repo/debian bullseye main
++ deb https://archive.mariadb.org/mariadb-10.9/repo/debian bullseye main
++ deb https://archive.mariadb.org/mariadb-10.8/repo/debian bullseye main
++ deb https://archive.mariadb.org/mariadb-10.7/repo/debian bullseye main
++ deb https://archive.mariadb.org/mariadb-10.6/repo/debian buster main
++ deb https://archive.mariadb.org/mariadb-10.5/repo/debian buster main
++ deb https://archive.mariadb.org/mariadb-10.4/repo/debian buster main
++ deb https://archive.mariadb.org/mariadb-10.3/repo/debian buster main
++ deb https://archive.mariadb.org/mariadb-10.2/repo/debian buster main
++ deb https://archive.mariadb.org/mariadb-10.1/repo/debian stretch main
++ deb https://archive.mariadb.org/mariadb-10.0/repo/debian jessie main
++ deb https://archive.mariadb.org/mariadb-5.5/repo/debian wheezy main
++ deb https://repo.mysql.com/apt/ubuntu/ noble mysql-8.4-lts
++ deb https://repo.mysql.com/apt/ubuntu/ noble mysql-8.0
++ deb https://repo.mysql.com/apt/ubuntu/ jammy mysql-8.0
++ deb https://repo.mysql.com/apt/ubuntu/ focal mysql-8.0
++ deb https://repo.mysql.com/apt/debian/ bookworm mysql-innovation
++ deb https://repo.mysql.com/apt/debian/ bookworm mysql-8.4-lts
++ deb https://repo.mysql.com/apt/debian/ bookworm mysql-8.0
++ deb https://repo.mysql.com/apt/debian/ bullseye mysql-8.4-lts
++ deb https://repo.mysql.com/apt/debian/ bullseye mysql-8.0
++ deb https://repo.mysql.com/apt/debian/ buster mysql-8.0
++ deb https://repo.mysql.com/apt/debian/ buster mysql-5.7
++ deb https://repo.mysql.com/apt/debian/ buster mysql-5.6
++ deb https://repo.mysql.com/apt/debian/ buster mysql-cluster-8.0
++ deb https://repo.mysql.com/apt/debian/ buster mysql-cluster-7.6
++ deb https://repo.mysql.com/apt/debian/ buster mysql-cluster-7.5
++ deb https://repo.mysql.com/apt/debian/ buster mysql-tools
++ deb https://repo.percona.com/apt/ bullseye main
++ deb https://repo.percona.com/apt/ buster main
++ deb https://repo.percona.com/apt/ stretch main
++ deb https://repo.percona.com/apt/ jessie main
++ deb https://repo.percona.com/apt/ wheezy main
++ EOF
++ apt-file update
++ deb-check-file-conflicts --debug --changes-file mariadb_*_amd64.changes
++
++## Check reverse dependencies
++
++When making changes to the MariaDB packaging in Debian and Ubuntu, keep in mind
++that there are hundreds of packages that depend on MariaDB. Most of them can be
++found by running:
++
++ apt rdepends 'default-mysql*' 'default-libmysql*' 'mariadb*' 'libmariadb*'
++
++The separate command/package 'apt-rdepends' can also check for reverse
++build-dependencies.
++
++Please be diligent in all changes to not wreak havoc in Debian.
--- /dev/null
- MARIADB="/usr/bin/mariadb --defaults-extra-file=/etc/mysql/debian.cnf"
- MYADMIN="/usr/bin/mariadb-admin --defaults-extra-file=/etc/mysql/debian.cnf"
+#!/bin/bash
+#
+# This script is executed by both SysV init /etc/init.d/mariadb and
+# systemd mariadb.service on every (re)start.
+#
+# Changes to this file will be preserved when updating the Debian package.
+#
+
+# shellcheck source=debian/additions/debian-start.inc.sh
+source /usr/share/mariadb/debian-start.inc.sh
+
+# Read default/mysql first and then default/mariadb just like the init.d file does
+if [ -f /etc/default/mysql ]
+then
+ # shellcheck source=/dev/null
+ . /etc/default/mysql
+fi
+
+if [ -f /etc/default/mariadb ]
+then
+ # shellcheck source=/dev/null
+ . /etc/default/mariadb
+fi
+
- MYUPGRADE="/usr/bin/mariadb-upgrade --defaults-extra-file=/etc/mysql/debian.cnf --version-check --silent"
++# Legacy credentials file from old installations. It is not present on new
++# installs and should not be unconditionally referenced.
++DEBIAN_CNF_OPT=""
++if [ -r /etc/mysql/debian.cnf ]; then
++ DEBIAN_CNF_OPT="--defaults-extra-file=/etc/mysql/debian.cnf"
++fi
++
++MARIADB="/usr/bin/mariadb $DEBIAN_CNF_OPT"
++MYADMIN="/usr/bin/mariadb-admin $DEBIAN_CNF_OPT"
+# Don't run full mariadb-upgrade on every server restart, use --version-check to do it only once
++MYUPGRADE="/usr/bin/mariadb-upgrade $DEBIAN_CNF_OPT --version-check --silent"
+MYCHECK_SUBJECT="WARNING: mariadb-check has found corrupt tables"
+MYCHECK_RCPT="${MYCHECK_RCPT:-root}"
+
+## Checking for corrupt, not cleanly closed (only for MyISAM and Aria engines) and upgrade needing tables.
+
+# The following commands should be run when the server is up but in background
+# where they do not block the server start and in one shell instance so that
+# they run sequentially. They are supposed not to echo anything to stdout.
+# If you want to disable the check for crashed tables comment
+# "check_for_crashed_tables" out.
+# (There may be no output to stdout inside the background process!)
+
+# Need to ignore SIGHUP, as otherwise a SIGHUP can sometimes abort the upgrade
+# process in the middle.
+trap "" SIGHUP
+(
+ upgrade_system_tables_if_necessary;
+ check_root_accounts;
+ check_for_crashed_tables;
+) >&2 &
+
+exit 0
--- /dev/null
- ## Is there MyISAM or Aria unclosed tables.
+#!/bin/bash
+#
+# This file is included by /etc/mysql/debian-start
+#
+
- # shellcheck disable=SC2086
++## Check MyISAM and Aria unclosed tables.
+# - Requires the server to be up.
+# - Is supposed to run silently in background.
+function check_for_crashed_tables() {
+ set -e
+ set -u
+
+ # But do it in the background to not stall the boot process.
+ logger -p daemon.info -i -t"$0" "Triggering myisam-recover for all MyISAM tables and aria-recover for all Aria tables"
+
+ # Checking for $? is unreliable so the size of the output is checked.
+ # Some table handlers like HEAP do not support CHECK TABLE.
+ tempfile=$(mktemp)
+
+ # We have to use xargs in this case, because a for loop barfs on the
+ # spaces in the thing to be looped over.
+
+ # If a crashed table is encountered, the "mariadb" command will return with a status different from 0
+ #
+ # The first query will generate lines like.
+ # select count(*) into @discard from 'mysql'.'db'
+ # The second line will load all tables without printing any actual results,
+ # but may show warnings and definitely is expected to have some error and
+ # exit code if crashed tables are encountered.
+ #
+ # Note that inside single quotes must be quoted with '\'' (to be outside of single quotes).
+ set +e
+ # The $MARIADB is intentionally used to expand into a command and arguments
- SELECT CONCAT("select count(*) into @discard from '\''", TABLE_SCHEMA, "'\''.'\''", TABLE_NAME, "'\''")
++ # shellcheck disable=SC2086,SC2016
+ echo '
++ SELECT CONCAT('\''select count(*) into @discard from `'\'', TABLE_SCHEMA, '\''`.`'\'', TABLE_NAME, '\''`'\'')
+ FROM information_schema.TABLES WHERE TABLE_SCHEMA<>"INFORMATION_SCHEMA" AND TABLE_SCHEMA<>"PERFORMANCE_SCHEMA"
+ AND (ENGINE="MyISAM" OR ENGINE="Aria")
+ ' | \
+ LC_ALL=C $MARIADB --skip-column-names --batch | \
+ xargs --no-run-if-empty -i $MARIADB --skip-column-names --silent --batch --force -e "{}" &> "${tempfile}"
+ set -e
+
+ if [ -s "$tempfile" ]
+ then
+ (
+ /bin/echo -e "\n" \
+ "Improperly closed tables are also reported if clients are accessing\n" \
+ "the tables *now*. A list of current connections is below.\n";
+ $MYADMIN processlist status
+ ) >> "${tempfile}"
+ # Check for presence as a dependency on mailx would require an MTA.
+ if [ -x /usr/bin/mailx ]
+ then
+ mailx -e -s"$MYCHECK_SUBJECT" "$MYCHECK_RCPT" < "$tempfile"
+ fi
+ (echo "$MYCHECK_SUBJECT"; cat "${tempfile}") | logger -p daemon.warn -i -t"$0"
+ fi
+ rm "${tempfile}"
+}
+
+## Check for tables needing an upgrade.
+# - Requires the server to be up.
+# - Is supposed to run silently in background.
+function upgrade_system_tables_if_necessary() {
+ set -e
+ set -u
+
+ logger -p daemon.info -i -t"$0" "Upgrading MariaDB tables if necessary."
+
+ # Filter all "duplicate column", "duplicate key" and "unknown column"
+ # errors as the script is designed to be idempotent.
+ LC_ALL=C $MYUPGRADE \
+ 2>&1 \
+ | grep -E -v '^(1|@had|ERROR (1051|1054|1060|1061|1146|1347|1348))' \
+ | logger -p daemon.warn -i -t"$0"
+}
+
+## Check for the presence of both, root accounts with and without password.
+# This might have been caused by a bug related to mysql_install_db (#418672).
+function check_root_accounts() {
+ set -e
+ set -u
+
+ logger -p daemon.info -i -t"$0" "Checking for insecure root accounts."
+
+ ret=$(echo "
+ SELECT count(*) FROM mysql.global_priv
+ WHERE user='root' AND
+ JSON_VALUE(priv, '$.plugin') in ('mysql_native_password', 'mysql_old_password', 'parsec') AND
+ JSON_VALUE(priv, '$.authentication_string') = '' AND
+ JSON_VALUE(priv, '$.password_last_changed') != 0
+ " | $MARIADB --skip-column-names)
+ if [ "$ret" -ne "0" ]
+ then
+ logger -p daemon.warn -i -t"$0" "WARNING: mysql.user contains $ret root accounts without password!"
+ fi
+}
--- /dev/null
- # MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+#!/usr/bin/perl
+
+# vim: tw=160:nowrap:expandtab:tabstop=3:shiftwidth=3:softtabstop=3
+
+# This program is copyright (c) 2006 Baron Schwartz, baron at xaprb dot com.
+# Maintainers since 2013 : Kenny Gryp - Frédéric Descamps
+# Feedback and improvements are gratefully received.
+#
+# THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
- MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
++# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+#
+# This program is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation, version 2; OR the Perl Artistic License. On UNIX and similar
+# systems, you can issue `man perlgpl' or `man perlartistic' to read these
+
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc., 51 Franklin
+# Street, Fifth Floor, Boston, MA 02110-1335 USA
+
+use strict;
+use warnings;
+use utf8;
+use feature ':5.16';
+use warnings FATAL => 'all';
+
+our $VERSION = '1.11.4';
+
+# Find the home directory; it's different on different OSes.
+our $homepath = $ENV{HOME} || $ENV{HOMEPATH} || $ENV{USERPROFILE} || '.';
+
+# Configuration files
+our $default_home_conf = "$homepath/.innotop/innotop.conf";
+our $default_central_conf = "/etc/innotop/innotop.conf";
+our $conf_file = "";
+
+## Begin packages ##
+
+package DSNParser;
+
+use DBI;
+use Data::Dumper;
+$Data::Dumper::Indent = 0;
+$Data::Dumper::Quotekeys = 0;
+use English qw(-no_match_vars);
+
+use constant MKDEBUG => $ENV{MKDEBUG} || 0;
+
+# Defaults are built-in, but you can add/replace items by passing them as
+# hashrefs of {key, desc, copy, dsn}. The desc and dsn items are optional.
+# You can set properties with the prop() sub. Don't set the 'opts' property.
+sub new {
+ my ( $class, @opts ) = @_;
+ my $self = {
+ opts => {
+ A => {
+ desc => 'Default character set',
+ dsn => 'charset',
+ copy => 1,
+ },
+ D => {
+ desc => 'Database to use',
+ dsn => 'database',
+ copy => 1,
+ },
+ F => {
+ desc => 'Only read default options from the given file',
+ dsn => 'mariadb_read_default_file',
+ copy => 1,
+ },
+ h => {
+ desc => 'Connect to host',
+ dsn => 'host',
+ copy => 1,
+ },
+ p => {
+ desc => 'Password to use when connecting',
+ dsn => 'password',
+ copy => 1,
+ },
+ P => {
+ desc => 'Port number to use for connection',
+ dsn => 'port',
+ copy => 1,
+ },
+ S => {
+ desc => 'Socket file to use for connection',
+ dsn => 'mariadb_socket',
+ copy => 1,
+ },
+ u => {
+ desc => 'User for login if not current user',
+ dsn => 'user',
+ copy => 1,
+ },
+ },
+ };
+ foreach my $opt ( @opts ) {
+ if (MKDEBUG) {
+ _d('Adding extra property ' . $opt->{key});
+ }
+ $self->{opts}->{$opt->{key}} = { desc => $opt->{desc}, copy => $opt->{copy} };
+ }
+ return bless $self, $class;
+}
+
+# Recognized properties:
+# * autokey: which key to treat a bareword as (typically h=host).
+# * dbidriver: which DBI driver to use; assumes mysql, supports Pg.
+# * required: which parts are required (hashref).
+# * setvars: a list of variables to set after connecting
+sub prop {
+ my ( $self, $prop, $value ) = @_;
+ if ( @_ > 2 ) {
+ MKDEBUG && _d("Setting $prop property");
+ $self->{$prop} = $value;
+ }
+ return $self->{$prop};
+}
+
+sub parse {
+ my ( $self, $dsn, $prev, $defaults ) = @_;
+ if ( !$dsn ) {
+ MKDEBUG && _d('No DSN to parse');
+ return;
+ }
+ MKDEBUG && _d("Parsing $dsn");
+ $prev ||= {};
+ $defaults ||= {};
+ my %given_props;
+ my %final_props;
+ my %opts = %{$self->{opts}};
+ my $prop_autokey = $self->prop('autokey');
+
+ # Parse given props
+ foreach my $dsn_part ( split(/,/, $dsn) ) {
+ if ( my ($prop_key, $prop_val) = $dsn_part =~ m/^(.)=(.*)$/ ) {
+ # Handle the typical DSN parts like h=host, P=3306, etc.
+ $given_props{$prop_key} = $prop_val;
+ }
+ elsif ( $prop_autokey ) {
+ # Handle barewords
+ MKDEBUG && _d("Interpreting $dsn_part as $prop_autokey=$dsn_part");
+ $given_props{$prop_autokey} = $dsn_part;
+ }
+ else {
+ MKDEBUG && _d("Bad DSN part: $dsn_part");
+ }
+ }
+
+ # Fill in final props from given, previous, and/or default props
+ foreach my $key ( keys %opts ) {
+ MKDEBUG && _d("Finding value for $key");
+ $final_props{$key} = $given_props{$key};
+ if ( !defined $final_props{$key}
+ && defined $prev->{$key} && $opts{$key}->{copy} )
+ {
+ $final_props{$key} = $prev->{$key};
+ MKDEBUG && _d("Copying value for $key from previous DSN");
+ }
+ if ( !defined $final_props{$key} ) {
+ $final_props{$key} = $defaults->{$key};
+ MKDEBUG && _d("Copying value for $key from defaults");
+ }
+ }
+
+ # Sanity check props
+ foreach my $key ( keys %given_props ) {
+ die "Unrecognized DSN part '$key' in '$dsn'\n"
+ unless exists $opts{$key};
+ }
+ if ( (my $required = $self->prop('required')) ) {
+ foreach my $key ( keys %$required ) {
+ die "Missing DSN part '$key' in '$dsn'\n" unless $final_props{$key};
+ }
+ }
+
+ return \%final_props;
+}
+
+sub as_string {
+ my ( $self, $dsn ) = @_;
+ return $dsn unless ref $dsn;
+ return join(',',
+ map { "$_=" . ($_ eq 'p' ? '...' : $dsn->{$_}) }
+ grep { defined $dsn->{$_} && $self->{opts}->{$_} }
+ sort keys %$dsn );
+}
+
+sub usage {
+ my ( $self ) = @_;
+ my $usage
+ = "DSN syntax is key=value[,key=value...] Allowable DSN keys:\n"
+ . " KEY COPY MEANING\n"
+ . " === ==== =============================================\n";
+ my %opts = %{$self->{opts}};
+ foreach my $key ( sort keys %opts ) {
+ $usage .= " $key "
+ . ($opts{$key}->{copy} ? 'yes ' : 'no ')
+ . ($opts{$key}->{desc} || '[No description]')
+ . "\n";
+ }
+ if ( (my $key = $self->prop('autokey')) ) {
+ $usage .= " If the DSN is a bareword, the word is treated as the '$key' key.\n";
+ }
+ return $usage;
+}
+
+# Supports PostgreSQL via the dbidriver element of $info, but assumes MySQL by
+# default.
+sub get_cxn_params {
+ my ( $self, $info ) = @_;
+ my $dsn;
+ my %opts = %{$self->{opts}};
+ my $driver = $self->prop('dbidriver') || '';
+ if ( $driver eq 'Pg' ) {
+ $dsn = 'DBI:Pg:dbname=' . ( $info->{D} || '' ) . ';'
+ . join(';', map { "$opts{$_}->{dsn}=$info->{$_}" }
+ grep { defined $info->{$_} }
+ qw(h P));
+ }
+ else {
+ $dsn = 'DBI:MariaDB:' . ( $info->{D} || '' ) . ';'
+ . join(';', map { "$opts{$_}->{dsn}=$info->{$_}" }
+ grep { defined $info->{$_} }
+ qw(F h P S A))
+ . ';mariadb_read_default_group=client';
+ }
+ MKDEBUG && _d($dsn);
+ return ($dsn, $info->{u}, $info->{p});
+}
+
+
+# Fills in missing info from a DSN after successfully connecting to the server.
+sub fill_in_dsn {
+ my ( $self, $dbh, $dsn ) = @_;
+ my $vars = $dbh->selectall_hashref('SHOW VARIABLES', 'Variable_name');
+ my ($user, $db) = $dbh->selectrow_array('SELECT USER(), DATABASE()');
+ $user =~ s/@.*//;
+ $dsn->{h} ||= $vars->{hostname}->{Value};
+ $dsn->{S} ||= $vars->{'socket'}->{Value};
+ $dsn->{P} ||= $vars->{port}->{Value};
+ $dsn->{u} ||= $user;
+ $dsn->{D} ||= $db;
+}
+
+sub get_dbh {
+ my ( $self, $cxn_string, $user, $pass, $opts ) = @_;
+ $opts ||= {};
+ my $defaults = {
+ AutoCommit => 0,
+ RaiseError => 1,
+ PrintError => 0,
+ };
+ @{$defaults}{ keys %$opts } = values %$opts;
+ my $dbh;
+ my $tries = 2;
+ while ( !$dbh && $tries-- ) {
+ eval {
+ MKDEBUG && _d($cxn_string, ' ', $user, ' ', $pass, ' {',
+ join(', ', map { "$_=>$defaults->{$_}" } keys %$defaults ), '}');
+ $dbh = DBI->connect($cxn_string, $user, $pass, $defaults);
+ # Immediately set character set and binmode on STDOUT.
+ if ( my ($charset) = $cxn_string =~ m/charset=(\w+)/ ) {
+ my $sql = "/*!40101 SET NAMES $charset*/";
+ MKDEBUG && _d("$dbh: $sql");
+ $dbh->do($sql);
+ MKDEBUG && _d('Enabling charset for STDOUT');
+ if ( $charset eq 'utf8' ) {
+ binmode(STDOUT, ':encoding(UTF-8)')
+ or die "Can't binmode(STDOUT, ':utf8'): $OS_ERROR";
+ }
+ else {
+ binmode(STDOUT) or die "Can't binmode(STDOUT): $OS_ERROR";
+ }
+ }
+ };
+ if ( !$dbh && $EVAL_ERROR ) {
+ MKDEBUG && _d($EVAL_ERROR);
+ if ( !$tries ) {
+ die $EVAL_ERROR;
+ }
+ }
+ }
+ # If setvars exists and it's MySQL connection, set them
+ my $setvars = $self->prop('setvars');
+ if ( $cxn_string =~ m/mysql/i && $setvars ) {
+ my $sql = "SET $setvars";
+ MKDEBUG && _d("$dbh: $sql");
+ eval {
+ $dbh->do($sql);
+ };
+ if ( $EVAL_ERROR ) {
+ MKDEBUG && _d($EVAL_ERROR);
+ }
+ }
+ MKDEBUG && _d('DBH info: ',
+ $dbh,
+ Dumper($dbh->selectrow_hashref(
+ 'SELECT DATABASE(), CONNECTION_ID(), VERSION()/*!50038 , @@hostname*/')),
+ ' Connection info: ', ($dbh->{mariadb_hostinfo} || 'undef'),
+ ' Character set info: ',
+ Dumper($dbh->selectall_arrayref(
+ 'SHOW VARIABLES LIKE "character_set%"', { Slice => {}})),
+ ' $DBD::MariaDB::VERSION: ', $DBD::MariaDB::VERSION,
+ ' $DBI::VERSION: ', $DBI::VERSION,
+ );
+ return $dbh;
+}
+
+# Tries to figure out a hostname for the connection.
+sub get_hostname {
+ my ( $self, $dbh ) = @_;
+ if ( my ($host) = ($dbh->{mariadb_hostinfo} || '') =~ m/^(\w+) via/ ) {
+ return $host;
+ }
+ my ( $hostname, $one ) = $dbh->selectrow_array(
+ 'SELECT /*!50038 @@hostname, */ 1');
+ return $hostname;
+}
+
+# Disconnects a database handle, but complains verbosely if there are any active
+# children. These are usually $sth handles that haven't been finish()ed.
+sub disconnect {
+ my ( $self, $dbh ) = @_;
+ MKDEBUG && $self->print_active_handles($dbh);
+ $dbh->disconnect;
+}
+
+sub print_active_handles {
+ my ( $self, $thing, $level ) = @_;
+ $level ||= 0;
+ printf("# Active %sh: %s %s %s\n", ($thing->{Type} || 'undef'), "\t" x $level,
+ $thing, (($thing->{Type} || '') eq 'st' ? $thing->{Statement} || '' : ''))
+ or die "Cannot print: $OS_ERROR";
+ foreach my $handle ( grep {defined} @{ $thing->{ChildHandles} } ) {
+ $self->print_active_handles( $handle, $level + 1 );
+ }
+}
+
+sub _d {
+ my ($package, undef, $line) = caller 0;
+ @_ = map { (my $temp = $_) =~ s/\n/\n# /g; $temp; }
+ map { defined $_ ? $_ : 'undef' }
+ @_;
+ # Use $$ instead of $PID in case the package
+ # does not use English.
+ print "# $package:$line $$ ", @_, "\n";
+}
+
+1;
+
+package InnoDBParser;
+
+use Data::Dumper;
+$Data::Dumper::Sortkeys = 1;
+use English qw(-no_match_vars);
+use List::Util qw(max);
+use POSIX qw(strftime);
+
+# Some common patterns
+my $d = qr/(\d+)/; # Digit
+my $f = qr/(\d+\.\d+)/; # Float
+my $t = qr/((?:\d+ \d+)|(?:[A-Fa-f0-9]+))/; # Transaction ID
+my $i = qr/((?:\d{1,3}\.){3}\d+)/; # IP address
+my $n = qr/([^`\s]+)/; # MySQL object name
+my $w = qr/(\w+)/; # Words
+my $fl = qr/([\w\.\/]+) line $d/; # Filename and line number
+my $h = qr/((?:0x)?[0-9a-f]*)/; # Hex
+my $s = qr/(\d{6} .?\d:\d\d:\d\d)/; # InnoDB timestamp
+
+# If you update this variable, also update the SYNOPSIS in the pod.
+my %innodb_section_headers = (
+ "TRANSACTIONS" => "tx",
+ "BUFFER POOL AND MEMORY" => "bp",
+ "SEMAPHORES" => "sm",
+ "LOG" => "lg",
+ "ROW OPERATIONS" => "ro",
+ "INSERT BUFFER AND ADAPTIVE HASH INDEX" => "ib",
+ "FILE I/O" => "io",
+ "LATEST DETECTED DEADLOCK" => "dl",
+ "LATEST FOREIGN KEY ERROR" => "fk",
+ "BACKGROUND THREAD" => "bt",
+);
+
+my %parser_for = (
+ tx => \&parse_tx_section,
+ bp => \&parse_bp_section,
+ sm => \&parse_sm_section,
+ lg => \&parse_lg_section,
+ ro => \&parse_ro_section,
+ ib => \&parse_ib_section,
+ io => \&parse_io_section,
+ dl => \&parse_dl_section,
+ fk => \&parse_fk_section,
+);
+
+my %fk_parser_for = (
+ Transaction => \&parse_fk_transaction_error,
+ Error => \&parse_fk_bad_constraint_error,
+ Cannot => \&parse_fk_cant_drop_parent_error,
+);
+
+# A thread's proc_info can be at least 98 different things I've found in the
+# source. Fortunately, most of them begin with a gerunded verb. These are
+# the ones that don't.
+my %is_proc_info = (
+ 'After create' => 1,
+ 'Execution of init_command' => 1,
+ 'FULLTEXT initialization' => 1,
+ 'Reopen tables' => 1,
+ 'Repair done' => 1,
+ 'Repair with keycache' => 1,
+ 'System lock' => 1,
+ 'Table lock' => 1,
+ 'Thread initialized' => 1,
+ 'User lock' => 1,
+ 'copy to tmp table' => 1,
+ 'discard_or_import_tablespace' => 1,
+ 'end' => 1,
+ 'got handler lock' => 1,
+ 'got old table' => 1,
+ 'init' => 1,
+ 'key cache' => 1,
+ 'locks' => 1,
+ 'malloc' => 1,
+ 'query end' => 1,
+ 'rename result table' => 1,
+ 'rename' => 1,
+ 'setup' => 1,
+ 'statistics' => 1,
+ 'status' => 1,
+ 'table cache' => 1,
+ 'update' => 1,
+);
+
+sub new {
+ bless {}, shift;
+}
+
+# Parse the status and return it.
+# See srv_printf_innodb_monitor in innobase/srv/srv0srv.c
+# Pass in the text to parse, whether to be in debugging mode, which sections
+# to parse (hashref; if empty, parse all), and whether to parse full info from
+# locks and such (probably shouldn't unless you need to).
+sub parse_status_text {
+ my ( $self, $fulltext, $debug, $sections, $full, $mysqlversion ) = @_;
+
+ die "I can't parse undef" unless defined $fulltext;
+ $fulltext =~ s/[\r\n]+/\n/g;
+
+ $sections ||= {};
+ die '$sections must be a hashref' unless ref($sections) eq 'HASH';
+
+ my %innodb_data = (
+ got_all => 0, # Whether I was able to get the whole thing
+ ts => '', # Timestamp the server put on it
+ last_secs => 0, # Num seconds the averages are over
+ sections => {}, # Parsed values from each section
+ );
+
+ if ( $debug ) {
+ $innodb_data{'fulltext'} = $fulltext;
+ }
+
+ # Get the most basic info about the status: beginning and end, and whether
+ # I got the whole thing (if there has been a big deadlock and there are
+ # too many locks to print, the output might be truncated)
+
+ my $time_text;
+ if ( ($mysqlversion =~ /^5\.[67]\./) || ($mysqlversion =~ /^10|11\.[0-9]\./) ) {
+ ( $time_text ) = $fulltext =~ m/^([0-9-]* [0-9:]*) [0-9a-fx]* INNODB MONITOR OUTPUT/m;
+ $innodb_data{'ts'} = [ parse_innodb_timestamp_56( $time_text ) ];
+ } else {
+ ( $time_text ) = $fulltext =~ m/^$s INNODB MONITOR OUTPUT$/m;
+ $innodb_data{'ts'} = [ parse_innodb_timestamp( $time_text ) ];
+ }
+
+ $innodb_data{'timestring'} = ts_to_string($innodb_data{'ts'});
+ ( $innodb_data{'last_secs'} ) = $fulltext
+ =~ m/Per second averages calculated from the last $d seconds/;
+
+ ( my $got_all ) = $fulltext =~ m/END OF INNODB MONITOR OUTPUT/;
+ $innodb_data{'got_all'} = $got_all || 0;
+
+ # Split it into sections. Each section begins with
+ # -----
+ # LABEL
+ # -----
+ my %innodb_sections;
+ my @matches = $fulltext
+ =~ m#\n(---+)\n([A-Z /]+)\n\1\n(.*?)(?=\n(---+)\n[A-Z /]+\n\4\n|$)#gs;
+ while ( my ( $start, $name, $text, $end ) = splice(@matches, 0, 4) ) {
+ $innodb_sections{$name} = [ $text, $end ? 1 : 0 ];
+ }
+
+ # Just for sanity's sake, make sure I understand what to do with each
+ # section.
+ eval {
+ foreach my $section ( keys %innodb_sections ) {
+ my $header = $innodb_section_headers{$section};
+ if ( !$header && $debug ) {
+ warn "Unknown section $section in $fulltext\n";
+ }
+
+ # The last section in the file is a special case, because instead of
+ # ending with the beginning of another section, it ends with the end of
+ # the file. So this section is complete if the entire file is
+ # complete. In different versions of InnoDB, various sections are
+ # last.
+ if ( $innodb_sections{$section}->[0] =~ s/\n---+\nEND OF INNODB.+\n=+$// ) {
+ $innodb_sections{$section}->[1] ||= $innodb_data{'got_all'};
+ }
+
+ if ( $header && $section ) {
+ $innodb_data{'sections'}->{ $header }
+ ->{'fulltext'} = $innodb_sections{$section}->[0];
+ $innodb_data{'sections'}->{ $header }
+ ->{'complete'} = $innodb_sections{$section}->[1];
+ }
+ else {
+ _debug( $debug, "header = " . ($header || 'undef') . ", section = " . ($section || 'undef')) if $debug;
+ }
+ }
+ };
+ if ( $EVAL_ERROR ) {
+ _debug( $debug, $EVAL_ERROR);
+ }
+
+ # ################################################################
+ # Parse the detailed data out of the sections.
+ # ################################################################
+ eval {
+ foreach my $section ( keys %parser_for ) {
+ if ( defined $innodb_data{'sections'}->{$section}
+ && (!%$sections || (defined($sections->{$section} && $sections->{$section})) )) {
+ $parser_for{$section}->(
+ $innodb_data{'sections'}->{$section},
+ $innodb_data{'sections'}->{$section}->{'complete'},
+ $debug,
+ $full,
+ $mysqlversion)
+ or delete $innodb_data{'sections'}->{$section};
+ }
+ else {
+ delete $innodb_data{'sections'}->{$section};
+ }
+ }
+ };
+ if ( $EVAL_ERROR ) {
+ _debug( $debug, $EVAL_ERROR);
+ }
+
+ return \%innodb_data;
+}
+
+# Parses the status text and returns it flattened out as a single hash.
+sub get_status_hash {
+ my ( $self, $fulltext, $debug, $sections, $full, $mysqlversion ) = @_;
+
+ # Parse the status text...
+ my $innodb_status
+ = $self->parse_status_text($fulltext, $debug, $sections, $full, $mysqlversion );
+
+ # Flatten the hierarchical structure into a single list by grabbing desired
+ # sections from it.
+ return
+ (map { 'IB_' . $_ => $innodb_status->{$_} } qw(timestring last_secs got_all)),
+ (map { 'IB_bp_' . $_ => $innodb_status->{'sections'}->{'bp'}->{$_} }
+ qw( writes_pending buf_pool_hit_rate total_mem_alloc buf_pool_reads
+ awe_mem_alloc pages_modified writes_pending_lru page_creates_sec
+ reads_pending pages_total buf_pool_hits writes_pending_single_page
+ page_writes_sec pages_read pages_written page_reads_sec
+ writes_pending_flush_list buf_pool_size add_pool_alloc
+ dict_mem_alloc pages_created buf_free complete )),
+ (map { 'IB_tx_' . $_ => $innodb_status->{'sections'}->{'tx'}->{$_} }
+ qw( num_lock_structs history_list_len purge_done_for transactions
+ purge_undo_for is_truncated trx_id_counter complete )),
+ (map { 'IB_ib_' . $_ => $innodb_status->{'sections'}->{'ib'}->{$_} }
+ qw( hash_table_size hash_searches_s non_hash_searches_s
+ bufs_in_node_heap used_cells size free_list_len seg_size inserts
+ merged_recs merges complete )),
+ (map { 'IB_lg_' . $_ => $innodb_status->{'sections'}->{'lg'}->{$_} }
+ qw( log_ios_done pending_chkp_writes last_chkp log_ios_s
+ log_flushed_to log_seq_no pending_log_writes complete )),
+ (map { 'IB_sm_' . $_ => $innodb_status->{'sections'}->{'sm'}->{$_} }
+ qw( wait_array_size rw_shared_spins rw_excl_os_waits mutex_os_waits
+ mutex_spin_rounds mutex_spin_waits rw_excl_spins rw_shared_os_waits
+ waits signal_count reservation_count complete )),
+ (map { 'IB_ro_' . $_ => $innodb_status->{'sections'}->{'ro'}->{$_} }
+ qw( queries_in_queue n_reserved_extents main_thread_state
+ main_thread_proc_no main_thread_id read_sec del_sec upd_sec ins_sec
+ read_views_open num_rows_upd num_rows_ins num_rows_read
+ queries_inside num_rows_del complete )),
+ (map { 'IB_fk_' . $_ => $innodb_status->{'sections'}->{'fk'}->{$_} }
+ qw( trigger parent_table child_index parent_index attempted_op
+ child_db timestring fk_name records col_name reason txn parent_db
+ type child_table parent_col complete )),
+ (map { 'IB_io_' . $_ => $innodb_status->{'sections'}->{'io'}->{$_} }
+ qw( pending_buffer_pool_flushes pending_pwrites pending_preads
+ pending_normal_aio_reads fsyncs_s os_file_writes pending_sync_ios
+ reads_s flush_type avg_bytes_s pending_ibuf_aio_reads writes_s
+ threads os_file_reads pending_aio_writes pending_log_ios os_fsyncs
+ pending_log_flushes complete )),
+ (map { 'IB_dl_' . $_ => $innodb_status->{'sections'}->{'dl'}->{$_} }
+ qw( timestring rolled_back txns complete ));
+
+}
+
+sub ts_to_string {
+ my $parts = shift;
+ return sprintf('%02d-%02d-%02d %02d:%02d:%02d', @$parts);
+}
+
+sub parse_innodb_timestamp {
+ my $text = shift;
+ if ( ! defined $text ) {
+ return (0, 0, 0, 0, 0, 0);
+ }
+ my ( $y, $m, $d, $h, $i, $s )
+ = $text =~ m/^(\d\d)(\d\d)(\d\d) +(\d+):(\d+):(\d+)$/;
+ die("Can't get timestamp from $text\n") unless $y;
+ $y += 2000;
+ return ( $y, $m, $d, $h, $i, $s );
+}
+
+sub parse_innodb_timestamp_56 {
+ my $text = shift;
+ my ( $y, $m, $d, $h, $i, $s )
+ = $text =~ m/^(\d\d\d\d)-(\d\d)-(\d\d) +(\d+):(\d+):(\d+)$/;
+ die("Can't get timestamp from $text\n") unless $y;
+ return ( $y, $m, $d, $h, $i, $s );
+}
+
+sub parse_fk_section {
+ my ( $section, $complete, $debug, $full, $mysqlversion ) = @_;
+ my $fulltext = $section->{'fulltext'};
+
+ return 0 unless $fulltext;
+
+ my ( $ts, $type );
+ if ( ($mysqlversion =~ /^5.[67]\./) || ($mysqlversion =~ /^10|11.[0-9]\./) ) {
+ ( $ts, $type ) = $fulltext =~ m/^([0-9-]* [0-9:]*)\s[0-9a-fx]*\s+(\w+)/m;
+ $section->{'ts'} = [ parse_innodb_timestamp_56( $ts ) ];
+ } else {
+ ( $ts, $type ) = $fulltext =~ m/^$s\s+(\w+)/m;
+ $section->{'ts'} = [ parse_innodb_timestamp( $ts ) ];
+ }
+
+ $section->{'timestring'} = ts_to_string($section->{'ts'});
+ $section->{'type'} = $type;
+
+ # Decide which type of FK error happened, and dispatch to the right parser.
+ if ( $type && $fk_parser_for{$type} ) {
+ $fk_parser_for{$type}->( $section, $complete, $debug, $fulltext, $full );
+ }
+
+ delete $section->{'fulltext'} unless $debug;
+
+ return 1;
+}
+
+sub parse_fk_cant_drop_parent_error {
+ my ( $section, $complete, $debug, $fulltext, $full ) = @_;
+
+ # Parse the parent/child table info out
+ @{$section}{ qw(attempted_op parent_db parent_table) } = $fulltext
+ =~ m{Cannot $w table `(.*)/(.*)`}m;
+ @{$section}{ qw(child_db child_table) } = $fulltext
+ =~ m{because it is referenced by `(.*)/(.*)`}m;
+
+ ( $section->{'reason'} ) = $fulltext =~ m/(Cannot .*)/s;
+ if ( !defined $section->{reason} ) {
+ ( $section->{'reason'} ) = $fulltext =~ m/(Trying to add .*)/s;
+ }
+ $section->{'reason'} =~ s/\n(?:InnoDB: )?/ /gm
+ if $section->{'reason'};
+
+ # Certain data may not be present. Make them '' if not present.
+ map { $section->{$_} ||= "" }
+ qw(child_index fk_name col_name parent_col);
+}
+
+# See dict/dict0dict.c, function dict_foreign_error_report
+# I don't care much about these. There are lots of different messages, and
+# they come from someone trying to create a foreign key, or similar
+# statements. They aren't indicative of some transaction trying to insert,
+# delete or update data. Sometimes it is possible to parse out a lot of
+# information about the tables and indexes involved, but often the message
+# contains the DDL string the user entered, which is way too much for this
+# module to try to handle.
+sub parse_fk_bad_constraint_error {
+ my ( $section, $complete, $debug, $fulltext, $full ) = @_;
+
+ # Parse the parent/child table and index info out
+ @{$section}{ qw(child_db child_table) } = $fulltext
+ =~ m{Error in foreign key constraint of table (.*)/(.*):$}m;
+ $section->{'attempted_op'} = 'DDL';
+
+ # FK name, parent info... if possible.
+ @{$section}{ qw(fk_name col_name parent_db parent_table parent_col) }
+ = $fulltext
+ =~ m/CONSTRAINT `?$n`? FOREIGN KEY \(`?$n`?\) REFERENCES (?:`?$n`?\.)?`?$n`? \(`?$n`?\)/;
+
+ if ( !defined($section->{'fk_name'}) ) {
+ # Try to parse SQL a user might have typed in a CREATE statement or such
+ @{$section}{ qw(col_name parent_db parent_table parent_col) }
+ = $fulltext
+ =~ m/FOREIGN\s+KEY\s*\(`?$n`?\)\s+REFERENCES\s+(?:`?$n`?\.)?`?$n`?\s*\(`?$n`?\)/i;
+ }
+ $section->{'parent_db'} ||= $section->{'child_db'};
+
+ # Name of the child index (index in the same table where the FK is, see
+ # definition of dict_foreign_struct in include/dict0mem.h, where it is
+ # called foreign_index, as opposed to referenced_index which is in the
+ # parent table. This may not be possible to find.
+ @{$section}{ qw(child_index) } = $fulltext
+ =~ m/^The index in the foreign key in table is $n$/m;
+
+ @{$section}{ qw(reason) } = $fulltext =~ m/:\s*([^:]+)(?= Constraint:|$)/ms;
+ $section->{'reason'} =~ s/\s+/ /g
+ if $section->{'reason'};
+
+ # Certain data may not be present. Make them '' if not present.
+ map { $section->{$_} ||= "" }
+ qw(child_index fk_name col_name parent_table parent_col);
+}
+
+# see source file row/row0ins.c
+sub parse_fk_transaction_error {
+ my ( $section, $complete, $debug, $fulltext, $full ) = @_;
+
+ # Parse the txn info out
+ my ( $txn ) = $fulltext
+ =~ m/Transaction:\n(TRANSACTION.*)\nForeign key constraint fails/s;
+ if ( $txn ) {
+ $section->{'txn'} = parse_tx_text( $txn, $complete, $debug, $full );
+ }
+
+ # Parse the parent/child table and index info out. There are two types: an
+ # update or a delete of a parent record leaves a child orphaned
+ # (row_ins_foreign_report_err), and an insert or update of a child record has
+ # no matching parent record (row_ins_foreign_report_add_err).
+
+ @{$section}{ qw(reason child_db child_table) }
+ = $fulltext =~ m{^(Foreign key constraint fails for table `(.*?)`?[/.]`?(.*)`:)$}m;
+
+ @{$section}{ qw(fk_name col_name parent_db parent_table parent_col) }
+ = $fulltext
+ =~ m/CONSTRAINT `$n` FOREIGN KEY \(`$n`\) REFERENCES (?:`$n`\.)?`$n` \(`$n`\)/;
+ $section->{'parent_db'} ||= $section->{'child_db'};
+
+ # Special case, which I don't know how to trigger, but see
+ # innobase/row/row0ins.c row_ins_check_foreign_constraint
+ if ( $fulltext =~ m/ibd file does not currently exist!/ ) {
+ my ( $attempted_op, $index, $records )
+ = $fulltext =~ m/^Trying to (add to index) `$n` tuple:\n(.*))?/sm;
+ $section->{'child_index'} = $index;
+ $section->{'attempted_op'} = $attempted_op || '';
+ if ( $records && $full ) {
+ ( $section->{'records'} )
+ = parse_innodb_record_dump( $records, $complete, $debug );
+ }
+ @{$section}{qw(parent_db parent_table)}
+ =~ m/^But the parent table `$n`\.`$n`$/m;
+ }
+ else {
+ my ( $attempted_op, $which, $index )
+ = $fulltext =~ m/^Trying to ([\w ]*) in (child|parent) table, in index `$n` tuple:$/m;
+ if ( $which ) {
+ $section->{$which . '_index'} = $index;
+ $section->{'attempted_op'} = $attempted_op || '';
+
+ # Parse out the related records in the other table.
+ my ( $search_index, $records );
+ if ( $which eq 'child' ) {
+ ( $search_index, $records ) = $fulltext
+ =~ m/^But in parent table [^,]*, in index `$n`,\nthe closest match we can find is record:\n(.*)/ms;
+ $section->{'parent_index'} = $search_index;
+ }
+ else {
+ ( $search_index, $records ) = $fulltext
+ =~ m/^But in child table [^,]*, in index `$n`, (?:the record is not available|there is a record:\n(.*))?/ms;
+ $section->{'child_index'} = $search_index;
+ }
+ if ( $records && $full ) {
+ $section->{'records'}
+ = parse_innodb_record_dump( $records, $complete, $debug );
+ }
+ else {
+ $section->{'records'} = '';
+ }
+ }
+ }
+
+ # Parse out the tuple trying to be updated, deleted or inserted.
+ my ( $trigger ) = $fulltext =~ m/^(DATA TUPLE: \d+ fields;\n.*)$/m;
+ if ( $trigger ) {
+ $section->{'trigger'} = parse_innodb_record_dump( $trigger, $complete, $debug );
+ }
+
+ # Certain data may not be present. Make them '' if not present.
+ map { $section->{$_} ||= "" }
+ qw(child_index fk_name col_name parent_table parent_col);
+}
+
+# There are new-style and old-style record formats. See rem/rem0rec.c
+# TODO: write some tests for this
+sub parse_innodb_record_dump {
+ my ( $dump, $complete, $debug ) = @_;
+ # Use bare return as recommend in page 199 of PBP
+ return unless $dump;
+
+ my $result = {};
+
+ if ( $dump =~ m/PHYSICAL RECORD/ ) {
+ my $style = $dump =~ m/compact format/ ? 'new' : 'old';
+ $result->{'style'} = $style;
+
+ # This is a new-style record.
+ if ( $style eq 'new' ) {
+ @{$result}{qw( heap_no type num_fields info_bits )}
+ = $dump
+ =~ m/^(?:Record lock, heap no $d )?([A-Z ]+): n_fields $d; compact format; info bits $d$/m;
+ }
+
+ # OK, it's old-style. Unfortunately there are variations here too.
+ elsif ( $dump =~ m/-byte offs / ) {
+ # Older-old style.
+ @{$result}{qw( heap_no type num_fields byte_offset info_bits )}
+ = $dump
+ =~ m/^(?:Record lock, heap no $d )?([A-Z ]+): n_fields $d; $d-byte offs [A-Z]+; info bits $d$/m;
+ if ( $dump !~ m/-byte offs TRUE/ ) {
+ $result->{'byte_offset'} = 0;
+ }
+ }
+ else {
+ # Newer-old style.
+ @{$result}{qw( heap_no type num_fields byte_offset info_bits )}
+ = $dump
+ =~ m/^(?:Record lock, heap no $d )?([A-Z ]+): n_fields $d; $d-byte offsets; info bits $d$/m;
+ }
+
+ }
+ else {
+ $result->{'style'} = 'tuple';
+ @{$result}{qw( type num_fields )}
+ = $dump =~ m/^(DATA TUPLE): $d fields;$/m;
+ }
+
+ # Fill in default values for things that couldn't be parsed.
+ map { $result->{$_} ||= 0 }
+ qw(heap_no num_fields byte_offset info_bits);
+ map { $result->{$_} ||= '' }
+ qw(style type );
+
+ my @fields = $dump =~ m/ (\d+:.*?;?);(?=$| \d+:)/gm;
+ $result->{'fields'} = [ map { parse_field($_, $complete, $debug ) } @fields ];
+
+ return $result;
+}
+
+# New/old-style applies here. See rem/rem0rec.c
+# $text should not include the leading space or the second trailing semicolon.
+sub parse_field {
+ my ( $text, $complete, $debug ) = @_;
+
+ # Sample fields:
+ # '4: SQL NULL, size 4 '
+ # '1: len 6; hex 000000005601; asc V ;'
+ # '6: SQL NULL'
+ # '5: len 30; hex 687474703a2f2f7777772e737765657477617465722e636f6d2f73746f72; asc http://www.sweetwater.com/stor;...(truncated)'
+ my ( $id, $nullsize, $len, $hex, $asc, $truncated );
+ ( $id, $nullsize ) = $text =~ m/^$d: SQL NULL, size $d $/;
+ if ( !defined($id) ) {
+ ( $id ) = $text =~ m/^$d: SQL NULL$/;
+ }
+ if ( !defined($id) ) {
+ ( $id, $len, $hex, $asc, $truncated )
+ = $text =~ m/^$d: len $d; hex $h; asc (.*);(\.\.\.\(truncated\))?$/;
+ }
+
+ die "Could not parse this field: '$text'" unless defined $id;
+ return {
+ id => $id,
+ len => defined($len) ? $len : defined($nullsize) ? $nullsize : 0,
+ 'hex' => defined($hex) ? $hex : '',
+ asc => defined($asc) ? $asc : '',
+ trunc => $truncated ? 1 : 0,
+ };
+
+}
+
+sub parse_dl_section {
+ my ( $dl, $complete, $debug, $full, $mysqlversion ) = @_;
+ return unless $dl;
+ my $fulltext = $dl->{'fulltext'};
+ return 0 unless $fulltext;
+
+ my ( $ts ) = $fulltext =~ m/^$s$/m;
+ return 0 unless $ts;
+
+ if ( ($mysqlversion =~ /^5\.[67]\./) || ($mysqlversion =~ /^10|11\.[0-9]\./) ) {
+ $dl->{'ts'} = [ parse_innodb_timestamp_56( $ts ) ];
+ }
+ else {
+ $dl->{'ts'} = [ parse_innodb_timestamp( $ts ) ];
+ }
+ $dl->{'timestring'} = ts_to_string($dl->{'ts'});
+ $dl->{'txns'} = {};
+
+ my @sections
+ = $fulltext
+ =~ m{
+ ^\*{3}\s([^\n]*) # *** (1) WAITING FOR THIS...
+ (.*?) # Followed by anything, non-greedy
+ (?=(?:^\*{3})|\z) # Followed by another three stars or EOF
+ }gmsx;
+
+
+ # Loop through each section. There are no assumptions about how many
+ # there are, who holds and wants what locks, and who gets rolled back.
+ while ( my ($header, $body) = splice(@sections, 0, 2) ) {
+ my ( $txn_id, $what ) = $header =~ m/^\($d\) (.*):$/;
+ next unless $txn_id;
+ $dl->{'txns'}->{$txn_id} ||= {};
+ my $txn = $dl->{'txns'}->{$txn_id};
+
+ if ( $what eq 'TRANSACTION' ) {
+ $txn->{'tx'} = parse_tx_text( $body, $complete, $debug, $full );
+ }
+ else {
+ push @{$txn->{'locks'}}, parse_innodb_record_locks( $body, $complete, $debug, $full );
+ }
+ }
+
+ @{ $dl }{ qw(rolled_back) }
+ = $fulltext =~ m/^\*\*\* WE ROLL BACK TRANSACTION \($d\)$/m;
+
+ # Make sure certain values aren't undef
+ map { $dl->{$_} ||= '' } qw(rolled_back);
+
+ delete $dl->{'fulltext'} unless $debug;
+ return 1;
+}
+
+sub parse_innodb_record_locks {
+ my ( $text, $complete, $debug, $full ) = @_;
+ my @result;
+
+ foreach my $lock ( $text =~ m/(^(?:RECORD|TABLE) LOCKS?.*$)/gm ) {
+ my $hash = {};
+ @{$hash}{ qw(lock_type space_id page_no n_bits index db table txn_id lock_mode) }
+ = $lock
+ =~ m{^(RECORD|TABLE) LOCKS? (?:space id $d page no $d n bits $d index `?$n`? of )?table `$n(?:/|`\.`)$n` trx id $t lock.mode (\S+)}m;
+ ( $hash->{'special'} )
+ = $lock =~ m/^(?:RECORD|TABLE) .*? locks (rec but not gap|gap before rec)/m;
+ $hash->{'insert_intention'}
+ = $lock =~ m/^(?:RECORD|TABLE) .*? insert intention/m ? 1 : 0;
+ $hash->{'waiting'}
+ = $lock =~ m/^(?:RECORD|TABLE) .*? waiting/m ? 1 : 0;
+
+ # Some things may not be in the text, so make sure they are not
+ # undef.
+ map { $hash->{$_} ||= 0 } qw(n_bits page_no space_id);
+ map { $hash->{$_} ||= "" } qw(index special);
+ push @result, $hash;
+ }
+
+ return @result;
+}
+
+sub parse_tx_text {
+ my ( $txn, $complete, $debug, $full ) = @_;
+
+ my ( $txn_id, $txn_status )
+ = $txn
+ =~ m/^(?:---)?TRANSACTION $t, ([^\n0-9,]*[^\s\d])/m;
+ $txn_status =~ s/,$// if $txn_status;
+ my ( $active_secs)
+ = $txn
+ =~ m/^[^\n]*\b$d sec\b/m;
+ my ( $proc_no )
+ = $txn
+ =~ m/process no $d/m;
+ my ( $os_thread_id )
+ = $txn
+ =~ m/OS thread id $d/m;
+ my ( $thread_status, $thread_decl_inside )
+ = $txn
+ =~ m/(?:OS thread id \d+|\d sec)(?: ([^,]+?))?(?:, thread declared inside InnoDB $d)?$/m;
+
+ # Parsing the line that begins 'MySQL thread id' is complicated. The only
+ # thing always in the line is the thread and query id. See function
+ # innobase_mysql_print_thd in InnoDB source file sql/ha_innodb.cc.
+ my ( $thread_line ) = $txn =~ m/^((?:MariaDB|MySQL) thread id .*)$/m;
+ my ( $mysql_thread_id, $query_id, $hostname, $ip, $user, $query_status );
+
+ if ( $thread_line ) {
+ # These parts can always be gotten.
+ ( $mysql_thread_id, $query_id ) = $thread_line =~ m/^(?:MariaDB|MySQL) thread id $d, .*?query id $d/m;
+
+ # If it's a master/slave thread, "Has (read|sent) all" may be the thread's
+ # proc_info. In these cases, there won't be any host/ip/user info
+ ( $query_status ) = $thread_line =~ m/(Has (?:read|sent) all .*$)/m;
+ if ( defined($query_status) ) {
+ $user = 'system user';
+ }
+
+ # It may be the case that the query id is the last thing in the line.
+ elsif ( $thread_line =~ m/query id \d+ / ) {
+ # The IP address is the only non-word thing left, so it's the most
+ # useful marker for where I have to start guessing.
+ ( $hostname, $ip ) = $thread_line =~ m/query id \d+(?: ([A-Za-z]\S+))? $i/m;
+ if ( defined $ip ) {
+ ( $user, $query_status ) = $thread_line =~ m/$ip $w(?: (.*))?$/;
+ }
+ else { # OK, there wasn't an IP address.
+ # There might not be ANYTHING except the query status.
+ ( $query_status ) = $thread_line =~ m/query id \d+ (.*)$/;
+ if ( $query_status !~ m/^\w+ing/ && !exists($is_proc_info{$query_status}) ) {
+ # The remaining tokens are, in order: hostname, user, query_status.
+ # It's basically impossible to know which is which.
+ ( $hostname, $user, $query_status ) = $thread_line
+ =~ m/query id \d+(?: ([A-Za-z]\S+))?(?: $w(?: (.*))?)?$/m;
+ if ( ($hostname || '') eq 'Slave' ) {
+ $hostname = '';
+ $user = 'system user';
+ $query_status = "Slave has $query_status";
+ }
+ }
+ else {
+ $user = 'system user';
+ }
+ }
+ }
+ }
+
+ my ( $lock_wait_status, $lock_structs, $heap_size, $row_locks, $undo_log_entries )
+ = $txn
+ =~ m/^(?:(\D*) )?$d lock struct\(s\), heap size $d(?:, $d row lock\(s\))?(?:, undo log entries $d)?$/m;
+ my ( $lock_wait_time )
+ = $txn
+ =~ m/^------- TRX HAS BEEN WAITING $d SEC/m;
+
+ my $locks;
+ # If the transaction has locks, grab the locks.
+ if ( $txn =~ m/^TABLE LOCK|RECORD LOCKS/ ) {
+ $locks = [parse_innodb_record_locks($txn, $complete, $debug, $full)];
+ }
+
+ my ( $tables_in_use, $tables_locked )
+ = $txn
+ =~ m/^mysql tables in use $d, locked $d$/m;
+ my ( $txn_doesnt_see_ge, $txn_sees_lt )
+ = $txn
+ =~ m/^Trx read view will not see trx with id >= $t, sees < $t$/m;
+ my $has_read_view = defined($txn_doesnt_see_ge);
+ # Only a certain number of bytes of the query text are included here, at least
+ # under some circumstances. Some versions include 300, some 600.
+ my ( $query_text )
+ = $txn
+ =~ m{
+ ^MySQL\sthread\sid\s[^\n]+\n # This comes before the query text
+ (.*?) # The query text
+ (?= # Followed by any of...
+ ^Trx\sread\sview
+ |^-------\sTRX\sHAS\sBEEN\sWAITING
+ |^TABLE\sLOCK
+ |^RECORD\sLOCKS\sspace\sid
+ |^(?:---)?TRANSACTION
+ |^\*\*\*\s\(\d\)
+ |\Z
+ )
+ }xms;
+ if ( $query_text ) {
+ $query_text =~ s/\s+$//;
+ }
+ else {
+ $query_text = '';
+ }
+
+ my %stuff = (
+ active_secs => $active_secs,
+ has_read_view => $has_read_view,
+ heap_size => $heap_size,
+ hostname => $hostname,
+ ip => $ip,
+ lock_structs => $lock_structs,
+ lock_wait_status => $lock_wait_status,
+ lock_wait_time => $lock_wait_time,
+ mysql_thread_id => $mysql_thread_id,
+ os_thread_id => $os_thread_id,
+ proc_no => $proc_no,
+ query_id => $query_id,
+ query_status => $query_status,
+ query_text => $query_text,
+ row_locks => $row_locks,
+ tables_in_use => $tables_in_use,
+ tables_locked => $tables_locked,
+ thread_decl_inside => $thread_decl_inside,
+ thread_status => $thread_status,
+ txn_doesnt_see_ge => $txn_doesnt_see_ge,
+ txn_id => $txn_id,
+ txn_sees_lt => $txn_sees_lt,
+ txn_status => $txn_status,
+ undo_log_entries => $undo_log_entries,
+ user => $user,
+ );
+ $stuff{'fulltext'} = $txn if $debug;
+ $stuff{'locks'} = $locks if $locks;
+
+ # Some things may not be in the txn text, so make sure they are not
+ # undef.
+ map { $stuff{$_} ||= 0 } qw(active_secs heap_size lock_structs
+ tables_in_use undo_log_entries tables_locked has_read_view
+ thread_decl_inside lock_wait_time proc_no row_locks);
+ map { $stuff{$_} ||= "" } qw(thread_status txn_doesnt_see_ge
+ txn_sees_lt query_status ip query_text lock_wait_status user);
+ $stuff{'hostname'} ||= $stuff{'ip'};
+
+ return \%stuff;
+}
+
+sub parse_tx_section {
+ my ( $section, $complete, $debug, $full ) = @_;
+ return unless $section && $section->{'fulltext'};
+ my $fulltext = $section->{'fulltext'};
+ $section->{'transactions'} = [];
+
+ # Handle the individual transactions
+ my @transactions = $fulltext =~ m/(---TRANSACTION [0-9A-Fa-f].*?)(?=\n---TRANSACTION|$)/gs;
+ foreach my $txn ( @transactions ) {
+ my $stuff = parse_tx_text( $txn, $complete, $debug, $full );
+ delete $stuff->{'fulltext'} unless $debug;
+ push @{$section->{'transactions'}}, $stuff;
+ }
+
+ # Handle the general info
+ @{$section}{ 'trx_id_counter' }
+ = $fulltext =~ m/^Trx id counter $t$/m;
+ @{$section}{ 'purge_done_for', 'purge_undo_for' }
+ = $fulltext =~ m/^Purge done for trx's n:o < $t undo n:o < $t$/m;
+ @{$section}{ 'history_list_len' } # This isn't present in some 4.x versions
+ = $fulltext =~ m/^History list length $d$/m;
+ @{$section}{ 'num_lock_structs' }
+ = $fulltext =~ m/^Total number of lock structs in row lock hash table $d$/m;
+ @{$section}{ 'is_truncated' }
+ = $fulltext =~ m/^\.\.\. truncated\.\.\.$/m ? 1 : 0;
+
+ # Fill in things that might not be present
+ foreach ( qw(history_list_len) ) {
+ $section->{$_} ||= 0;
+ }
+
+ delete $section->{'fulltext'} unless $debug;
+ return 1;
+}
+
+# I've read the source for this section.
+sub parse_ro_section {
+ my ( $section, $complete, $debug, $full ) = @_;
+ return unless $section && $section->{'fulltext'};
+ my $fulltext = $section->{'fulltext'};
+
+ # Grab the info
+ @{$section}{ 'queries_inside', 'queries_in_queue' }
+ = $fulltext =~ m/^$d queries inside InnoDB, $d queries in queue$/m;
+ ( $section->{ 'read_views_open' } )
+ = $fulltext =~ m/^$d read views open inside InnoDB$/m;
+ ( $section->{ 'n_reserved_extents' } )
+ = $fulltext =~ m/^$d tablespace extents now reserved for B-tree/m;
+ @{$section}{ 'main_thread_proc_no', 'main_thread_id', 'main_thread_state' }
+ = $fulltext =~ m/^Main thread (?:process no. $d, )?id $d, state: (.*)$/m;
+ @{$section}{ 'num_rows_ins', 'num_rows_upd', 'num_rows_del', 'num_rows_read' }
+ = $fulltext =~ m/^Number of rows inserted $d, updated $d, deleted $d, read $d$/m;
+ @{$section}{ 'ins_sec', 'upd_sec', 'del_sec', 'read_sec' }
+ = $fulltext =~ m#^$f inserts/s, $f updates/s, $f deletes/s, $f reads/s$#m;
+ $section->{'main_thread_proc_no'} ||= 0;
+
+ map { $section->{$_} ||= 0 } qw(read_views_open n_reserved_extents);
+ delete $section->{'fulltext'} unless $debug;
+ return 1;
+}
+
+sub parse_lg_section {
+ my ( $section, $complete, $debug, $full ) = @_;
+ return unless $section;
+ my $fulltext = $section->{'fulltext'};
+
+ # Grab the info
+ ( $section->{ 'log_seq_no' } )
+ = $fulltext =~ m/Log sequence number \s*(\d.*)$/m;
+ ( $section->{ 'log_flushed_to' } )
+ = $fulltext =~ m/Log flushed up to \s*(\d.*)$/m;
+ ( $section->{ 'last_chkp' } )
+ = $fulltext =~ m/Last checkpoint at \s*(\d.*)$/m;
+ @{$section}{ 'pending_log_writes', 'pending_chkp_writes' }
+ = $fulltext =~ m/$d pending log (?:writes|flushes), $d pending chkp writes/;
+ @{$section}{ 'log_ios_done', 'log_ios_s' }
+ = $fulltext =~ m#$d log i/o's done, $f log i/o's/second#;
+
+ delete $section->{'fulltext'} unless $debug;
+ return 1;
+}
+
+sub parse_ib_section {
+ my ( $section, $complete, $debug, $full ) = @_;
+ return unless $section && $section->{'fulltext'};
+ my $fulltext = $section->{'fulltext'};
+
+ # Some servers will output ibuf information for tablespace 0, as though there
+ # might be many tablespaces with insert buffers. (In practice I believe
+ # the source code shows there will only ever be one). I have to parse both
+ # cases here, but I assume there will only be one.
+ @{$section}{ 'size', 'free_list_len', 'seg_size' }
+ = $fulltext =~ m/^Ibuf(?: for space 0)?: size $d, free list len $d, seg size $d/m;
+ @{$section}{ 'inserts', 'merged_recs', 'merges' }
+ = $fulltext =~ m/^$d inserts, $d merged recs, $d merges$/m;
+ if ( ! defined $section->{inserts} ) {
+ @{$section}{ 'inserts' }
+ = $fulltext =~ m/merged operations:\n insert $d,/s;
+ # This isn't really true, but it's not really important either. We already
+ # aren't supporting the 'delete' operations.
+ @{$section}{ 'merged_recs', 'merges' } = (0, 0);
+ }
+
+ @{$section}{ 'hash_table_size', 'used_cells', 'bufs_in_node_heap' }
+ = $fulltext =~ m/^Hash table size $d(?:, used cells $d)?, node heap has $d buffer\(s\)$/m;
+ @{$section}{ 'hash_searches_s', 'non_hash_searches_s' }
+ = $fulltext =~ m{^$f hash searches/s, $f non-hash searches/s$}m;
+
+ delete $section->{'fulltext'} unless $debug;
+ return 1;
+}
+
+sub parse_wait_array {
+ my ( $text, $complete, $debug, $full ) = @_;
+ my %result;
+
+ @result{ qw(thread waited_at_filename waited_at_line waited_secs) }
+ = $text =~ m/^--Thread $d has waited at $fl for $f seconds/m;
+
+ # Depending on whether it's a SYNC_MUTEX,RW_LOCK_EX,RW_LOCK_SHARED,
+ # there will be different text output
+ if ( $text =~ m/^Mutex at/m ) {
+ $result{'request_type'} = 'M';
+ @result{ qw( lock_mem_addr lock_cfile_name lock_cline lock_var) }
+ = $text =~ m/^Mutex at $h created file $fl, lock var $d$/m;
+ @result{ qw( waiters_flag )}
+ = $text =~ m/^waiters flag $d$/m;
+ }
+ else {
+ @result{ qw( request_type lock_mem_addr lock_cfile_name lock_cline) }
+ = $text =~ m/^(.)-lock on RW-latch at $h created in file $fl$/m;
+ @result{ qw( writer_thread writer_lock_mode ) }
+ = $text =~ m/^a writer \(thread id $d\) has reserved it in mode (.*)$/m;
+ @result{ qw( num_readers waiters_flag )}
+ = $text =~ m/^number of readers $d, waiters flag $d$/m;
+ @result{ qw(last_s_file_name last_s_line ) }
+ = $text =~ m/Last time read locked in file $fl$/m;
+ @result{ qw(last_x_file_name last_x_line ) }
+ = $text =~ m/Last time write locked in file $fl$/m;
+ }
+
+ $result{'cell_waiting'} = $text =~ m/^wait has ended$/m ? 0 : 1;
+ $result{'cell_event_set'} = $text =~ m/^wait is ending$/m ? 1 : 0;
+
+ # Because there are two code paths, some things won't get set.
+ map { $result{$_} ||= '' }
+ qw(last_s_file_name last_x_file_name writer_lock_mode);
+ map { $result{$_} ||= 0 }
+ qw(num_readers lock_var last_s_line last_x_line writer_thread);
+
+ return \%result;
+}
+
+sub parse_sm_section {
+ my ( $section, $complete, $debug, $full ) = @_;
+ return 0 unless $section && $section->{'fulltext'};
+ my $fulltext = $section->{'fulltext'};
+
+ # Grab the info
+ @{$section}{ 'reservation_count', 'signal_count' }
+ = $fulltext =~ m/^OS WAIT ARRAY INFO: reservation count $d, signal count $d$/m;
+ @{$section}{ 'mutex_spin_waits', 'mutex_spin_rounds', 'mutex_os_waits' }
+ = $fulltext =~ m/^Mutex spin waits $d, rounds $d, OS waits $d$/m;
+ @{$section}{ 'rw_shared_spins', 'rw_shared_os_waits', 'rw_excl_spins', 'rw_excl_os_waits' }
+ = $fulltext =~ m/^RW-shared spins $d, OS waits $d; RW-excl spins $d, OS waits $d$/m;
+ if ( ! defined $section->{rw_shared_spins} ) {
+ @{$section}{ 'rw_shared_spins', 'rw_shared_os_waits'}
+ = $fulltext =~ m/^RW-shared spins $d, rounds \d+, OS waits $d$/m;
+ @{$section}{ 'rw_excl_spins', 'rw_excl_os_waits' }
+ = $fulltext =~ m/^RW-excl spins $d, rounds \d+, OS waits $d$/m;
+ }
+
+ # Look for info on waits.
+ my @waits = $fulltext =~ m/^(--Thread.*?)^(?=Mutex spin|--Thread)/gms;
+ $section->{'waits'} = [ map { parse_wait_array($_, $complete, $debug) } @waits ];
+ $section->{'wait_array_size'} = scalar(@waits);
+
+ delete $section->{'fulltext'} unless $debug;
+ return 1;
+}
+
+# I've read the source for this section.
+sub parse_bp_section {
+ my ( $section, $complete, $debug, $full ) = @_;
+ return unless $section && $section->{'fulltext'};
+ my $fulltext = $section->{'fulltext'};
+
+ # Grab the info
+ @{$section}{ 'total_mem_alloc', 'add_pool_alloc' }
+ = $fulltext =~ m/^Total memory allocated $d; in additional pool allocated $d$/m;
+ @{$section}{'dict_mem_alloc'} = $fulltext =~ m/Dictionary memory allocated $d/;
+ @{$section}{'awe_mem_alloc'} = $fulltext =~ m/$d MB of AWE memory/;
+ @{$section}{'buf_pool_size'} = $fulltext =~ m/^Buffer pool size\s*$d$/m;
+ @{$section}{'buf_free'} = $fulltext =~ m/^Free buffers\s*$d$/m;
+ @{$section}{'pages_total'} = $fulltext =~ m/^Database pages\s*$d$/m;
+ @{$section}{'pages_modified'} = $fulltext =~ m/^Modified db pages\s*$d$/m;
+ @{$section}{'pages_read', 'pages_created', 'pages_written'}
+ = $fulltext =~ m/^Pages read $d, created $d, written $d$/m;
+ @{$section}{'page_reads_sec', 'page_creates_sec', 'page_writes_sec'}
+ = $fulltext =~ m{^$f reads/s, $f creates/s, $f writes/s$}m;
+ @{$section}{'buf_pool_hits', 'buf_pool_reads'}
+ = $fulltext =~ m{Buffer pool hit rate $d / $d}m;
+ if ($fulltext =~ m/^No buffer pool page gets since the last printout$/m) {
+ @{$section}{'buf_pool_hits', 'buf_pool_reads'} = (0, 0);
+ @{$section}{'buf_pool_hit_rate'} = '--';
+ }
+ else {
+ @{$section}{'buf_pool_hit_rate'}
+ = $fulltext =~ m{Buffer pool hit rate (\d+ / \d+)}m;
+ }
+ @{$section}{'reads_pending'} = $fulltext =~ m/^Pending reads $d/m;
+ @{$section}{'writes_pending_lru', 'writes_pending_flush_list', 'writes_pending_single_page' }
+ = $fulltext =~ m/^Pending writes: LRU $d, flush list $d, single page $d$/m;
+
+ map { $section->{$_} ||= 0 }
+ qw(writes_pending_lru writes_pending_flush_list writes_pending_single_page
+ awe_mem_alloc dict_mem_alloc);
+ @{$section}{'writes_pending'} = List::Util::sum(
+ @{$section}{ qw(writes_pending_lru writes_pending_flush_list writes_pending_single_page) });
+
+ delete $section->{'fulltext'} unless $debug;
+ return 1;
+}
+
+# I've read the source for this.
+sub parse_io_section {
+ my ( $section, $complete, $debug, $full ) = @_;
+ return unless $section && $section->{'fulltext'};
+ my $fulltext = $section->{'fulltext'};
+ $section->{'threads'} = {};
+
+ # Grab the I/O thread info
+ my @threads = $fulltext =~ m<^(I/O thread \d+ .*)$>gm;
+ foreach my $thread (@threads) {
+ my ( $tid, $state, $purpose, $event_set )
+ = $thread =~ m{I/O thread $d state: (.+?) \((.*)\)(?: ev set)?$}m;
+ if ( defined $tid ) {
+ $section->{'threads'}->{$tid} = {
+ thread => $tid,
+ state => $state,
+ purpose => $purpose,
+ event_set => $event_set ? 1 : 0,
+ };
+ }
+ }
+
+ # Grab the reads/writes/flushes info
+ @{$section}{ 'pending_normal_aio_reads', 'pending_aio_writes' }
+ = $fulltext =~ m/^Pending normal aio reads: $d(?: [^\]]*\])?, aio writes: $d/m;
+ @{$section}{ 'pending_ibuf_aio_reads', 'pending_log_ios', 'pending_sync_ios' }
+ = $fulltext =~ m{^ ibuf aio reads: $d, log i/o's: $d, sync i/o's: $d$}m;
+ @{$section}{ 'flush_type', 'pending_log_flushes', 'pending_buffer_pool_flushes' }
+ = $fulltext =~ m/^Pending flushes \($w\) log: $d; buffer pool: $d$/m;
+ @{$section}{ 'os_file_reads', 'os_file_writes', 'os_fsyncs' }
+ = $fulltext =~ m/^$d OS file reads, $d OS file writes, $d OS fsyncs$/m;
+ @{$section}{ 'reads_s', 'avg_bytes_s', 'writes_s', 'fsyncs_s' }
+ = $fulltext =~ m{^$f reads/s, $d avg bytes/read, $f writes/s, $f fsyncs/s$}m;
+ @{$section}{ 'pending_preads', 'pending_pwrites' }
+ = $fulltext =~ m/$d pending preads, $d pending pwrites$/m;
+ @{$section}{ 'pending_preads', 'pending_pwrites' } = (0, 0)
+ unless defined($section->{'pending_preads'});
+
+ delete $section->{'fulltext'} unless $debug;
+ return 1;
+}
+
+sub _debug {
+ my ( $debug, $msg ) = @_;
+ if ( $debug ) {
+ die $msg;
+ }
+ else {
+ warn $msg;
+ }
+ return 1;
+}
+
+1;
+
+# end_of_package InnoDBParser
+
+package main;
+
+use sigtrap qw(handler finish untrapped normal-signals);
+
+use Data::Dumper;
+use DBI;
+use English qw(-no_match_vars);
+use File::Basename qw(dirname);
+use File::Temp;
+use Getopt::Long;
+use List::Util qw(max min maxstr sum);
+use POSIX qw(ceil);
+use Time::HiRes qw(time sleep);
+use Term::ReadKey qw(ReadMode ReadKey);
+
+# License and warranty information. {{{1
+# ###########################################################################
+
+my $innotop_license = <<"LICENSE";
+
+This is innotop version $VERSION, a MySQL and InnoDB monitor.
+
+This program is copyright (c) 2006 Baron Schwartz.
+Feedback and improvements are welcome.
+
+THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
- # Figure out which master to purge ons.
++MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation, version 2; OR the Perl Artistic License. On UNIX and similar
+systems, you can issue `man perlgpl' or `man perlartistic' to read these
+licenses.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc., 51 Franklin
+Street, Fifth Floor, Boston, MA 02110-1335 USA.
+LICENSE
+
+# Configuration information and global setup {{{1
+# ###########################################################################
+
+# Really, really, super-global variables.
+my @config_versions = (
+ "000-000-000", "001-003-000", # config file was one big name-value hash.
+ "001-003-000", "001-004-002", # config file contained non-user-defined stuff.
+);
+
+my $clear_screen_sub;
+my $dsn_parser = new DSNParser();
+
+# This defines expected properties and defaults for the column definitions that
+# eventually end up in tbl_meta.
+my %col_props = (
+ hdr => '',
+ just => '-',
+ dec => 0, # Whether to align the column on the decimal point
+ num => 0,
+ label => '',
+ user => 0,
+ src => '',
+ tbl => '', # Helps when writing/reading custom columns in config files
+ minw => 0,
+ maxw => 0,
+ trans => [],
+ agg => 'first', # Aggregate function
+ aggonly => 0, # Whether to show only when tbl_meta->{aggregate} is true
+ agghide => 0, # Whether NOT to show when tbl_meta->{aggregate} is true
+);
+
+# Actual DBI connections to MySQL servers.
+my %dbhs;
+
+# Command-line parameters {{{2
+# ###########################################################################
+
+my @opt_spec = (
+ { s => 'help', d => 'Show this help message' },
+ { s => 'color|C!', d => 'Use terminal coloring (default)', c => 'color' },
+ { s => 'config|c=s', d => 'Config file to read' },
+ { s => 'nonint|n', d => 'Non-interactive, output tab-separated fields' },
+ { s => 'count=i', d => 'Number of updates before exiting' },
+ { s => 'delay|d=f', d => 'Delay between updates in seconds', c => 'interval' },
+ { s => 'mode|m=s', d => 'Operating mode to start in', c => 'mode' },
+ { s => 'inc|i!', d => 'Measure incremental differences', c => 'status_inc' },
+ { s => 'spark=i', d => 'Length of status sparkline (default 10)', c=> 'spark' },
+ { s => 'write|w', d => 'Write running configuration into home directory if no config files were loaded' },
+ { s => 'skipcentral|s', d => 'Skip reading the central configuration file' },
+ { s => 'version', d => 'Output version information and exit' },
+ { s => 'user|u=s', d => 'User for login if not current user' },
+ { s => 'password|p=s', d => 'Password to use for connection' },
+ { s => 'askpass', d => 'Prompt for a password when connecting to MySQL'},
+ { s => 'host|h=s', d => 'Connect to host' },
+ { s => 'port|P=i', d => 'Port number to use for connection' },
+ { s => 'socket|S=s', d => 'MySQL socket to use for connection' },
+ { s => 'timestamp|t+', d => 'Print timestamp in -n mode (1: per iter; 2: per line)' },
+);
+
+# This is the container for the command-line options' values to be stored in
+# after processing. Initial values are defaults.
+my %opts = (
+ n => !( -t STDIN && -t STDOUT ), # If in/out aren't to terminals, we're interactive
+);
+# Post-process...
+my %opt_seen;
+foreach my $spec ( @opt_spec ) {
+ my ( $long, $short ) = $spec->{s} =~ m/^(\w+)(?:\|([^!+=:]*))?/;
+ $spec->{k} = $short || $long;
+ $spec->{l} = $long;
+ $spec->{t} = $short;
+ $spec->{n} = $spec->{s} =~ m/!/;
+ $opts{$spec->{k}} = undef unless defined $opts{$spec->{k}};
+ die "Duplicate option $spec->{k}" if $opt_seen{$spec->{k}}++;
+}
+
+Getopt::Long::Configure('no_ignore_case', 'bundling');
+GetOptions( map { $_->{s} => \$opts{$_->{k}} } @opt_spec) or $opts{help} = 1;
+
+if ( $opts{version} ) {
+ print "innotop Ver $VERSION\n";
+ exit(0);
+}
+
+if ( $opts{c} and ! -f $opts{c} ) {
+ print $opts{c} . " doesn't exist. Exiting.\n";
+ exit(1);
+}
+
+if ( $opts{'askpass'} ) {
+ $opts{'p'} = noecho_password("Enter password ");
+}
+
+if ( $opts{'help'} ) {
+ print "Usage: innotop <options> <innodb-status-file>\n\n";
+ my $maxw = max(map { length($_->{l}) + ($_->{n} ? 4 : 0)} @opt_spec);
+ foreach my $spec ( sort { $a->{l} cmp $b->{l} } @opt_spec ) {
+ my $long = $spec->{n} ? "[no]$spec->{l}" : $spec->{l};
+ my $short = $spec->{t} ? "-$spec->{t}" : '';
+ printf(" --%-${maxw}s %-4s %s\n", $long, $short, $spec->{d});
+ }
+ print <<USAGE;
+
+innotop is a MySQL and InnoDB transaction/status monitor, like 'top' for
+MySQL. It displays queries, InnoDB transactions, lock waits, deadlocks,
+foreign key errors, open tables, replication status, buffer information,
+row operations, logs, I/O operations, load graph, and more. You can
+monitor many servers at once with innotop.
+
+USAGE
+ exit(1);
+}
+
+if ( defined($opts{p}) && length($opts{p}) == 0 ) {
+ print "Enter password: ";
+ ReadMode('noecho');
+ $opts{p} = <STDIN>;
+ chomp($opts{p});
+ ReadMode('normal');
+}
+
+# Meta-data (table definitions etc) {{{2
+# ###########################################################################
+
+# Expressions {{{3
+# Convenience so I can copy/paste these in several places...
+# ###########################################################################
+my %exprs = (
+ Host => q{my $host = host || hostname || ''; ($host) = $host =~ m/^((?:[\d.]+(?=:|$))|(?:[a-z0-9-]+))/i; return $host || ''},
+ Port => q{my ($p) = host =~ m/:(.*)$/; return $p || 0},
+ OldVersions => q{dulint_to_int(IB_tx_trx_id_counter) - dulint_to_int(IB_tx_purge_done_for)},
+ MaxTxnTime => q/max(map{ $_->{active_secs} } @{ IB_tx_transactions }) || 0/,
+ NumTxns => q{scalar @{ IB_tx_transactions } },
+ DirtyBufs => q{ $cur->{IB_bp_pages_modified} / ($cur->{IB_bp_buf_pool_size} || 1) },
+ BufPoolFill => q{ $cur->{IB_bp_pages_total} / ($cur->{IB_bp_buf_pool_size} || 1) },
+ ServerLoad => q{ $cur->{Threads_connected}/(Questions||1)/Uptime_hires },
+ Connection => q{ max_connections || $cur->{Threads_connected} },
+ chcxn_2_cxn => q{ if ( defined($cur->{cxn}) ) { return $cur->{cxn}; } else { my ($cha, $conn) = split ("=",$cur->{chcxn}) ; return $conn; } },
+ chcxn_2_ch => q{ if ( defined($cur->{channel_name}) ) { return $cur->{channel_name}; } else { my ($cha, $conn) = split ("=",$cur->{chcxn}) ; $cha = '' if ($cha = /no_channels/); return $cha || 'failed'; } },
+ TxnTimeRemain => q{ defined undo_log_entries && defined $pre->{undo_log_entries} && undo_log_entries < $pre->{undo_log_entries} ? undo_log_entries / (($pre->{undo_log_entries} - undo_log_entries)/((active_secs-$pre->{active_secs})||1))||1 : 0},
+ SlaveCatchupRate => ' defined $cur->{seconds_behind_master} && defined $pre->{seconds_behind_master} && $cur->{seconds_behind_master} < $pre->{seconds_behind_master} ? ($pre->{seconds_behind_master}-$cur->{seconds_behind_master})/($cur->{Uptime_hires}-$pre->{Uptime_hires}) : 0',
+ QcacheHitRatio => q{(Qcache_hits||0)/(((Com_select||0)+(Qcache_hits||0))||1)},
+ QueryDetail => q{sprintf("%2d/%2d/%2d/%2d",
+ ((Com_select||0)+(Qcache_hits||0))/(Questions||1)*100,
+ ((Com_insert||0)+(Com_replace||0))/(Questions||1)*100,
+ (Com_update||0)/(Questions||1)*100,
+ (Com_delete||0)/(Questions||1)*100,
+)},
+);
+
+# ###########################################################################
+# Column definitions {{{3
+# Defines every column in every table. A named column has the following
+# properties:
+# * hdr Column header/title
+# * label Documentation for humans.
+# * num Whether it's numeric (for sorting).
+# * just Alignment; generated from num, user-overridable in tbl_meta
+# * minw, maxw Auto-generated, user-overridable.
+# Values from this hash are just copied to tbl_meta, which is where everything
+# else in the program should read from.
+# ###########################################################################
+
+my %columns = (
+ active_secs => { hdr => 'SecsActive', num => 1, label => 'Seconds transaction has been active', },
+ add_pool_alloc => { hdr => 'Add\'l Pool', num => 1, label => 'Additional pool allocated' },
+ attempted_op => { hdr => 'Action', num => 0, label => 'The action that caused the error' },
+ awe_mem_alloc => { hdr => 'AWE Memory', num => 1, label => '[Windows] AWE memory allocated' },
+ binlog_cache_overflow => { hdr => 'Binlog Cache', num => 1, label => 'Transactions too big for binlog cache that went to disk' },
+ binlog_do_db => { hdr => 'Binlog Do DB', num => 0, label => 'binlog-do-db setting' },
+ binlog_ignore_db => { hdr => 'Binlog Ignore DB', num => 0, label => 'binlog-ignore-db setting' },
+ blocking_thread => { hdr => 'BThread', num => 1, label => 'Blocking thread' },
+ blocking_query => { hdr => 'Blocking Query', num => 0, label => 'Blocking query' },
+ blocking_rows_modified => { hdr => 'BRowsMod', num => 1, label => 'Blocking number rows modified' },
+ blocking_age => { hdr => 'BAge', num => 1, label => 'Blocking age' },
+ blocking_wait_secs => { hdr => 'BWait', num => 1, label => 'Blocking wait time' },
+ blocking_user => { hdr => 'BUser', num => 0, label => 'Blocking user' },
+ blocking_host => { hdr => 'BHost', num => 0, label => 'Blocking host' },
+ blocking_db => { hdr => 'BDB', num => 0, label => 'Blocking database' },
+ blocking_status => { hdr => 'BStatus', num => 0, label => 'Blocking thread status' },
+ bps_in => { hdr => 'BpsIn', num => 1, label => 'Bytes per second received by the server', },
+ bps_out => { hdr => 'BpsOut', num => 1, label => 'Bytes per second sent by the server', },
+ buf_free => { hdr => 'Free Bufs', num => 1, label => 'Buffers free in the buffer pool' },
+ buf_pool_hit_rate => { hdr => 'Hit Rate', num => 0, label => 'Buffer pool hit rate' },
+ buf_pool_hits => { hdr => 'Hits', num => 1, label => 'Buffer pool hits' },
+ buf_pool_reads => { hdr => 'Reads', num => 1, label => 'Buffer pool reads' },
+ buf_pool_size => { hdr => 'Size', num => 1, label => 'Buffer pool size' },
+ bufs_in_node_heap => { hdr => 'Node Heap Bufs', num => 1, label => 'Buffers in buffer pool node heap' },
+ bytes_behind_master => { hdr => 'ByteLag', num => 1, label => 'Bytes the slave lags the master in binlog' },
+ cell_event_set => { hdr => 'Ending?', num => 1, label => 'Whether the cell event is set' },
+ cell_waiting => { hdr => 'Waiting?', num => 1, label => 'Whether the cell is waiting' },
+ channel_name => { hdr => 'Channel', num => 0, label => 'The name of the replication channel' },
+ child_db => { hdr => 'Child DB', num => 0, label => 'The database of the child table' },
+ child_index => { hdr => 'Child Index', num => 0, label => 'The index in the child table' },
+ child_table => { hdr => 'Child Table', num => 0, label => 'The child table' },
+ cmd => { hdr => 'Cmd', num => 0, label => 'Type of command being executed', },
+ cnt => { hdr => 'Cnt', num => 0, label => 'Count', agg => 'count', aggonly => 1 },
+ connections => { hdr => 'Cxns', num => 1, label => 'Connections' },
+ connect_retry => { hdr => 'Connect Retry', num => 1, label => 'Slave connect-retry timeout' },
+ cxn => { hdr => 'CXN', num => 0, label => 'Connection from which the data came', },
+ db => { hdr => 'DB', num => 0, label => 'Current database', },
+ dict_mem_alloc => { hdr => 'Dict Mem', num => 1, label => 'Dictionary memory allocated' },
+ dirty_bufs => { hdr => 'Dirty Buf', num => 1, label => 'Dirty buffer pool pages' },
+ dl_txn_num => { hdr => 'Num', num => 0, label => 'Deadlocked transaction number', },
+ event_set => { hdr => 'Evt Set?', num => 1, label => '[Win32] if a wait event is set', },
+ exec_master_log_pos => { hdr => 'Exec Master Log Pos', num => 1, label => 'Exec Master Log Position' },
+ executed_gtid_set => { hdr => 'Executed GTID Set', num => 0, label => 'Executed GTID Set', },
+ fk_name => { hdr => 'Constraint', num => 0, label => 'The name of the FK constraint' },
+ free_list_len => { hdr => 'Free List Len', num => 1, label => 'Length of the free list' },
+ has_read_view => { hdr => 'Rd View', num => 1, label => 'Whether the transaction has a read view' },
+ hash_searches_s => { hdr => 'Hash/Sec', num => 1, label => 'Number of hash searches/sec' },
+ hash_table_size => { hdr => 'Size', num => 1, label => 'Number of non-hash searches/sec' },
+ heap_no => { hdr => 'Heap', num => 1, label => 'Heap number' },
+ heap_size => { hdr => 'Heap', num => 1, label => 'Heap size' },
+ history_list_len => { hdr => 'History', num => 1, label => 'History list length' },
+ host_and_domain => { hdr => 'Host', num => 0, label => 'Hostname/IP and domain' },
+ host_and_port => { hdr => 'Host/IP', num => 0, label => 'Hostname or IP address, and port number', },
+ hostname => { hdr => 'Host', num => 0, label => 'Hostname' },
+ index => { hdr => 'Index', num => 0, label => 'The index involved', agghide => 1 },
+ index_ref => { hdr => 'Index Ref', num => 0, label => 'Index referenced' },
+ info => { hdr => 'Query', num => 0, label => 'Info or the current query', },
+ insert_intention => { hdr => 'Ins Intent', num => 1, label => 'Whether the thread was trying to insert' },
+ inserts => { hdr => 'Inserts', num => 1, label => 'Inserts' },
+ io_bytes_s => { hdr => 'Bytes/Sec', num => 1, label => 'Average I/O bytes/sec' },
+ io_flush_type => { hdr => 'Flush Type', num => 0, label => 'I/O Flush Type' },
+ io_fsyncs_s => { hdr => 'fsyncs/sec', num => 1, label => 'I/O fsyncs/sec' },
+ io_reads_s => { hdr => 'Reads/Sec', num => 1, label => 'Average I/O reads/sec' },
+ io_writes_s => { hdr => 'Writes/Sec', num => 1, label => 'Average I/O writes/sec' },
+ ip => { hdr => 'IP', num => 0, label => 'IP address' },
+ is_name_locked => { hdr => 'Locked', num => 1, label => 'Whether table is name locked', },
+ key_buffer_hit => { hdr => 'KCacheHit', num => 1, label => 'Key cache hit ratio', },
+ key_len => { hdr => 'Key Length', num => 1, label => 'Number of bytes used in the key' },
+ last_chkp => { hdr => 'Last Checkpoint', num => 0, label => 'Last log checkpoint' },
+ last_errno => { hdr => 'Last Errno', num => 1, label => 'Last error number' },
+ last_error => { hdr => 'Last Error', num => 0, label => 'Last error' },
+ last_s_file_name => { hdr => 'S-File', num => 0, label => 'Filename where last read locked' },
+ last_s_line => { hdr => 'S-Line', num => 1, label => 'Line where last read locked' },
+ last_x_file_name => { hdr => 'X-File', num => 0, label => 'Filename where last write locked' },
+ last_x_line => { hdr => 'X-Line', num => 1, label => 'Line where last write locked' },
+ last_pct => { hdr => 'Pct', num => 1, label => 'Last Percentage' },
+ last_total => { hdr => 'Last Total', num => 1, label => 'Last Total' },
+ last_value => { hdr => 'Last Incr', num => 1, label => 'Last Value' },
+ load => { hdr => 'Load', num => 1, label => 'Server load' },
+ locked_count => { hdr => 'Lock', num => 1, label => 'Number of locked threads' },
+ lock_cfile_name => { hdr => 'Crtd File', num => 0, label => 'Filename where lock created' },
+ lock_cline => { hdr => 'Crtd Line', num => 1, label => 'Line where lock created' },
+ lock_info => { hdr => 'Lock Info', num => 0, label => 'Lock information' },
+ lock_mem_addr => { hdr => 'Addr', num => 0, label => 'The lock memory address' },
+ lock_mode => { hdr => 'Mode', num => 0, label => 'The lock mode' },
+ lock_structs => { hdr => 'LStrcts', num => 1, label => 'Number of lock structs' },
+ lock_type => { hdr => 'Type', num => 0, label => 'The lock type' },
+ lock_var => { hdr => 'Lck Var', num => 1, label => 'The lock variable' },
+ lock_wait_time => { hdr => 'Wait', num => 1, label => 'How long txn has waited for a lock' },
+ log_flushed_to => { hdr => 'Flushed To', num => 0, label => 'Log position flushed to' },
+ log_ios_done => { hdr => 'IO Done', num => 1, label => 'Log I/Os done' },
+ log_ios_s => { hdr => 'IO/Sec', num => 1, label => 'Average log I/Os per sec' },
+ log_seq_no => { hdr => 'Sequence No.', num => 0, label => 'Log sequence number' },
+ longest_sql => { hdr => 'SQL', num => 0, label => 'Longest-running SQL statement' },
+ main_thread_id => { hdr => 'Main Thread ID', num => 1, label => 'Main thread ID' },
+ main_thread_proc_no => { hdr => 'Main Thread Proc', num => 1, label => 'Main thread process number' },
+ main_thread_state => { hdr => 'Main Thread State', num => 0, label => 'Main thread state' },
+ master_file => { hdr => 'File', num => 0, label => 'Master file' },
+ master_host => { hdr => 'Master', num => 0, label => 'Master server hostname' },
+ master_log_file => { hdr => 'Master Log File', num => 0, label => 'Master log file' },
+ master_port => { hdr => 'Master Port', num => 1, label => 'Master port' },
+ master_pos => { hdr => 'Position', num => 1, label => 'Master position' },
+ master_ssl_allowed => { hdr => 'Master SSL Allowed', num => 0, label => 'Master SSL Allowed' },
+ master_ssl_ca_file => { hdr => 'Master SSL CA File', num => 0, label => 'Master SSL Cert Auth File' },
+ master_ssl_ca_path => { hdr => 'Master SSL CA Path', num => 0, label => 'Master SSL Cert Auth Path' },
+ master_ssl_cert => { hdr => 'Master SSL Cert', num => 0, label => 'Master SSL Cert' },
+ master_ssl_cipher => { hdr => 'Master SSL Cipher', num => 0, label => 'Master SSL Cipher' },
+ master_ssl_key => { hdr => 'Master SSL Key', num => 0, label => 'Master SSL Key' },
+ master_user => { hdr => 'Master User', num => 0, label => 'Master username' },
+ master_uuid => { hdr => 'Master UUID', num => 0, label => 'Master UUID', },
+ max_txn => { hdr => 'MaxTxnTime', num => 1, label => 'MaxTxn' },
+ max_query_time => { hdr => 'MaxSQL', num => 1, label => 'Longest running SQL' },
+ merged_recs => { hdr => 'Merged Recs', num => 1, label => 'Merged records' },
+ merges => { hdr => 'Merges', num => 1, label => 'Merges' },
+ miss_rate => { hdr => 'Miss', num => 1, label => 'InnoDB buffer pool miss rate' },
+ mutex_os_waits => { hdr => 'Waits', num => 1, label => 'Mutex OS Waits' },
+ mutex_spin_rounds => { hdr => 'Rounds', num => 1, label => 'Mutex Spin Rounds' },
+ mutex_spin_waits => { hdr => 'Spins', num => 1, label => 'Mutex Spin Waits' },
+ mysql_thread_id => { hdr => 'ID', num => 1, label => 'MySQL connection (thread) ID', },
+ name => { hdr => 'Name', num => 0, label => 'Variable Name' },
+ n_bits => { hdr => '# Bits', num => 1, label => 'Number of bits' },
+ non_hash_searches_s => { hdr => 'Non-Hash/Sec', num => 1, label => 'Non-hash searches/sec' },
+ num_deletes => { hdr => 'Del', num => 1, label => 'Number of deletes' },
+ num_deletes_sec => { hdr => 'Del/Sec', num => 1, label => 'Number of deletes' },
+ num_inserts => { hdr => 'Ins', num => 1, label => 'Number of inserts' },
+ num_inserts_sec => { hdr => 'Ins/Sec', num => 1, label => 'Number of inserts' },
+ num_readers => { hdr => 'Readers', num => 1, label => 'Number of readers' },
+ num_reads => { hdr => 'Read', num => 1, label => 'Number of reads' },
+ num_reads_sec => { hdr => 'Read/Sec', num => 1, label => 'Number of reads' },
+ num_res_ext => { hdr => 'BTree Extents', num => 1, label => 'Number of extents reserved for B-Tree' },
+ num_rows => { hdr => 'Row Count', num => 1, label => 'Number of rows estimated to examine' },
+ num_times_open => { hdr => 'In Use', num => 1, label => '# times table is opened', },
+ num_txns => { hdr => 'Txns', num => 1, label => 'Number of transactions' },
+ num_updates => { hdr => 'Upd', num => 1, label => 'Number of updates' },
+ num_updates_sec => { hdr => 'Upd/Sec', num => 1, label => 'Number of updates' },
+ 'open' => { hdr => 'Tbls', num => 1, label => 'Number of open tables' },
+ os_file_reads => { hdr => 'OS Reads', num => 1, label => 'OS file reads' },
+ os_file_writes => { hdr => 'OS Writes', num => 1, label => 'OS file writes' },
+ os_fsyncs => { hdr => 'OS fsyncs', num => 1, label => 'OS fsyncs' },
+ os_thread_id => { hdr => 'OS Thread', num => 1, label => 'The operating system thread ID' },
+ p_aio_writes => { hdr => 'Async Wrt', num => 1, label => 'Pending asynchronous I/O writes' },
+ p_buf_pool_flushes => { hdr => 'Buffer Pool Flushes', num => 1, label => 'Pending buffer pool flushes' },
+ p_ibuf_aio_reads => { hdr => 'IBuf Async Rds', num => 1, label => 'Pending insert buffer asynch I/O reads' },
+ p_log_flushes => { hdr => 'Log Flushes', num => 1, label => 'Pending log flushes' },
+ p_log_ios => { hdr => 'Log I/Os', num => 1, label => 'Pending log I/O operations' },
+ p_normal_aio_reads => { hdr => 'Async Rds', num => 1, label => 'Pending asynchronous I/O reads' },
+ p_preads => { hdr => 'preads', num => 1, label => 'Pending p-reads' },
+ p_pwrites => { hdr => 'pwrites', num => 1, label => 'Pending p-writes' },
+ p_sync_ios => { hdr => 'Sync I/Os', num => 1, label => 'Pending synchronous I/O operations' },
+ page_creates_sec => { hdr => 'Creates/Sec', num => 1, label => 'Page creates/sec' },
+ page_no => { hdr => 'Page', num => 1, label => 'Page number' },
+ page_reads_sec => { hdr => 'Reads/Sec', num => 1, label => 'Page reads per second' },
+ page_writes_sec => { hdr => 'Writes/Sec', num => 1, label => 'Page writes per second' },
+ pages_created => { hdr => 'Created', num => 1, label => 'Pages created' },
+ pages_modified => { hdr => 'Dirty Pages', num => 1, label => 'Pages modified (dirty)' },
+ pages_read => { hdr => 'Reads', num => 1, label => 'Pages read' },
+ pages_total => { hdr => 'Pages', num => 1, label => 'Pages total' },
+ pages_written => { hdr => 'Writes', num => 1, label => 'Pages written' },
+ parent_col => { hdr => 'Parent Column', num => 0, label => 'The referred column in the parent table', },
+ parent_db => { hdr => 'Parent DB', num => 0, label => 'The database of the parent table' },
+ parent_index => { hdr => 'Parent Index', num => 0, label => 'The referred index in the parent table' },
+ parent_table => { hdr => 'Parent Table', num => 0, label => 'The parent table' },
+ part_id => { hdr => 'Part ID', num => 1, label => 'Sub-part ID of the query' },
+ partitions => { hdr => 'Partitions', num => 0, label => 'Query partitions used' },
+ pct => { hdr => 'Pct', num => 1, label => 'Percentage' },
+ pending_chkp_writes => { hdr => 'Chkpt Writes', num => 1, label => 'Pending log checkpoint writes' },
+ pending_log_writes => { hdr => 'Log Writes', num => 1, label => 'Pending log writes' },
+ port => { hdr => 'Port', num => 1, label => 'Client port number', },
+ possible_keys => { hdr => 'Poss. Keys', num => 0, label => 'Possible keys' },
+ proc_no => { hdr => 'Proc', num => 1, label => 'Process number' },
+ q_detail => { hdr => 'Se/In/Up/De%', num => 0, label => 'Detailed Query', },
+ q_cache_hit => { hdr => 'QCacheHit', num => 1, label => 'Query cache hit ratio', },
+ qps => { hdr => 'QPS', num => 1, label => 'How many queries/sec', },
+ queries_in_queue => { hdr => 'Queries Queued', num => 1, label => 'Queries in queue' },
+ queries_inside => { hdr => 'Queries Inside', num => 1, label => 'Queries inside InnoDB' },
+ query_id => { hdr => 'Query ID', num => 1, label => 'Query ID' },
+ query_status => { hdr => 'Query Status', num => 0, label => 'The query status' },
+ query_text => { hdr => 'Query Text', num => 0, label => 'The query text' },
+ questions => { hdr => 'Questions', num => 1, label => 'How many queries the server has gotten', },
+ read_master_log_pos => { hdr => 'Read Master Pos', num => 1, label => 'Read master log position' },
+ read_views_open => { hdr => 'Rd Views', num => 1, label => 'Number of read views open' },
+ reads_pending => { hdr => 'Pending Reads', num => 1, label => 'Reads pending' },
+ relay_log_file => { hdr => 'Relay File', num => 0, label => 'Relay log file' },
+ relay_log_pos => { hdr => 'Relay Pos', num => 1, label => 'Relay log position' },
+ relay_log_size => { hdr => 'Relay Size', num => 1, label => 'Relay log size' },
+ relay_master_log_file => { hdr => 'Relay Master File', num => 0, label => 'Relay master log file' },
+ replicate_do_db => { hdr => 'Do DB', num => 0, label => 'Replicate-do-db setting' },
+ replicate_do_table => { hdr => 'Do Table', num => 0, label => 'Replicate-do-table setting' },
+ replicate_ignore_db => { hdr => 'Ignore DB', num => 0, label => 'Replicate-ignore-db setting' },
+ replicate_ignore_table => { hdr => 'Ignore Table', num => 0, label => 'Replicate-do-table setting' },
+ replicate_wild_do_table => { hdr => 'Wild Do Table', num => 0, label => 'Replicate-wild-do-table setting' },
+ replicate_wild_ignore_table => { hdr => 'Wild Ignore Table', num => 0, label => 'Replicate-wild-ignore-table setting' },
+ request_type => { hdr => 'Type', num => 0, label => 'Type of lock the thread waits for' },
+ reservation_count => { hdr => 'ResCnt', num => 1, label => 'Reservation Count' },
+ retrieved_gtid_set => { hdr => 'Retrieved GTID Set', num => 0, label => 'Retrieved GTID Set', },
+ row_locks => { hdr => 'RLocks', num => 1, label => 'Number of row locks' },
+ rows_changed => { hdr => 'Changed', num => 1, label => 'Number of rows changed' },
+ rows_changed_x_indexes => { hdr => 'Chg X Idx', num => 1, label => 'Number of rows changed X indexes' },
+ rows_read => { hdr => 'Reads', num => 1, label => 'Number of rows read' },
+ rows_read_from_indexes => { hdr => 'Reads Via Idx', num => 1, label => 'Number of rows read from indexes' },
+ run => { hdr => 'Run', num => 1, label => 'Threads_running' },
+ rw_excl_os_waits => { hdr => 'RW Waits', num => 1, label => 'R/W Excl. OS Waits' },
+ rw_excl_spins => { hdr => 'RW Spins', num => 1, label => 'R/W Excl. Spins' },
+ rw_shared_os_waits => { hdr => 'Sh Waits', num => 1, label => 'R/W Shared OS Waits' },
+ rw_shared_spins => { hdr => 'Sh Spins', num => 1, label => 'R/W Shared Spins' },
+ spark_qps => { hdr => 'QPS', num => 0, label => 'QPS Sparkline' },
+ spark_run => { hdr => 'Run', num => 0, label => 'Threads_running Sparkline' },
+ scan_type => { hdr => 'Type', num => 0, label => 'Scan type in chosen' },
+ seg_size => { hdr => 'Seg. Size', num => 1, label => 'Segment size' },
+ select_type => { hdr => 'Select Type', num => 0, label => 'Type of select used' },
+ server_uuid => { hdr => 'Server UUID', num => 0, label => 'Server UUID', },
+ signal_count => { hdr => 'Signals', num => 1, label => 'Signal Count' },
+ size => { hdr => 'Size', num => 1, label => 'Size of the tablespace' },
+ skip_counter => { hdr => 'Skip Counter', num => 1, label => 'Skip counter' },
+ slave_catchup_rate => { hdr => 'Catchup', num => 1, label => 'How fast the slave is catching up in the binlog' },
+ slave_io_running => { hdr => 'Slave-IO', num => 0, label => 'Whether the slave I/O thread is running' },
+ slave_io_state => { hdr => 'Slave IO State', num => 0, label => 'Slave I/O thread state' },
+ slave_open_temp_tables => { hdr => 'Temp', num => 1, label => 'Slave open temp tables' },
+ slave_running => { hdr => 'Repl', num => 0, label => 'Slave running' },
+ slave_sql_running => { hdr => 'Slave-SQL', num => 0, label => 'Whether the slave SQL thread is running' },
+ sort_time => { hdr => 'SortTimeLag', num => 1, label => 'Time slave lags master sort' },
+ slow => { hdr => 'Slow', num => 1, label => 'How many slow queries', },
+ space_id => { hdr => 'Space', num => 1, label => 'Tablespace ID' },
+ special => { hdr => 'Special', num => 0, label => 'Special/Other info' },
+ state => { hdr => 'State', num => 0, label => 'Connection state', maxw => 18, },
+ tables_in_use => { hdr => 'Tbl Used', num => 1, label => 'Number of tables in use' },
+ tables_locked => { hdr => 'Tbl Lck', num => 1, label => 'Number of tables locked' },
+ tbl => { hdr => 'Table', num => 0, label => 'Table', },
+ thread => { hdr => 'Thread', num => 1, label => 'Thread number' },
+ thread_decl_inside => { hdr => 'Thread Inside', num => 0, label => 'What the thread is declared inside' },
+ thread_purpose => { hdr => 'Purpose', num => 0, label => "The thread's purpose" },
+ thread_status => { hdr => 'Thread Status', num => 0, label => 'The thread status' },
+ time => { hdr => 'Time', num => 1, label => 'Time since the last event', },
+ time_behind_master => { hdr => 'TimeLag', num => 1, label => 'Time slave lags master' },
+ timestring => { hdr => 'Timestring', num => 0, label => 'Time the event occurred' },
+ total => { hdr => 'Total', num => 1, label => 'Total' },
+ total_mem_alloc => { hdr => 'Memory', num => 1, label => 'Total memory allocated' },
+ truncates => { hdr => 'Trunc', num => 0, label => 'Whether the deadlock is truncating InnoDB status' },
+ txn_doesnt_see_ge => { hdr => "Txn Won't See", num => 0, label => 'Where txn read view is limited' },
+ txn_id => { hdr => 'ID', num => 0, label => 'Transaction ID' },
+ txn_sees_lt => { hdr => 'Txn Sees', num => 1, label => 'Where txn read view is limited' },
+ txn_status => { hdr => 'Txn Status', num => 0, label => 'Transaction status' },
+ txn_time_remain => { hdr => 'Remaining', num => 1, label => 'Time until txn rollback/commit completes' },
+ undo_log_entries => { hdr => 'Undo', num => 1, label => 'Number of undo log entries' },
+ undo_for => { hdr => 'Undo', num => 0, label => 'Undo for' },
+ until_condition => { hdr => 'Until Condition', num => 0, label => 'Slave until condition' },
+ until_log_file => { hdr => 'Until Log File', num => 0, label => 'Slave until log file' },
+ uptime => { hdr => 'Uptime', num => 1, label => 'Uptime' },
+ until_log_pos => { hdr => 'Until Log Pos', num => 1, label => 'Slave until log position' },
+ used_cells => { hdr => 'Cells Used', num => 1, label => 'Number of cells used' },
+ used_bufs => { hdr => 'Used Bufs', num => 1, label => 'Number of buffer pool pages used' },
+ user => { hdr => 'User', num => 0, label => 'Database username', },
+ value => { hdr => 'Value', num => 1, label => 'Value' },
+ versions => { hdr => 'Versions', num => 1, label => 'Number of InnoDB MVCC versions unpurged' },
+ victim => { hdr => 'Victim', num => 0, label => 'Whether this txn was the deadlock victim' },
+ wait_array_size => { hdr => 'Wait Array Size', num => 1, label => 'Wait Array Size' },
+ wait_status => { hdr => 'Lock Status', num => 0, label => 'Status of txn locks' },
+ waited_at_filename => { hdr => 'File', num => 0, label => 'Filename at which thread waits' },
+ waited_at_line => { hdr => 'Line', num => 1, label => 'Line at which thread waits' },
+ waiters_flag => { hdr => 'Waiters', num => 1, label => 'Waiters Flag' },
+ waiting => { hdr => 'Waiting', num => 1, label => 'Whether lock is being waited for' },
+ waiting_thread => { hdr => 'WThread', num => 1, label => 'Waiting thread' },
+ waiting_query => { hdr => 'Waiting Query', num => 0, label => 'Waiting query' },
+ waiting_rows_modified => { hdr => 'WRowsMod', num => 1, label => 'Waiting number rows modified' },
+ waiting_age => { hdr => 'WAge', num => 1, label => 'Waiting age' },
+ waiting_wait_secs => { hdr => 'WWait', num => 1, label => 'Waiting wait time' },
+ waiting_user => { hdr => 'WUser', num => 0, label => 'Waiting user' },
+ waiting_host => { hdr => 'WHost', num => 0, label => 'Waiting host' },
+ waiting_db => { hdr => 'WDB', num => 0, label => 'Waiting database' },
+ when => { hdr => 'When', num => 0, label => 'Time scale' },
+ writer_lock_mode => { hdr => 'Wrtr Lck Mode', num => 0, label => 'Writer lock mode' },
+ writer_thread => { hdr => 'Wrtr Thread', num => 1, label => 'Writer thread ID' },
+ writes_pending => { hdr => 'Writes', num => 1, label => 'Number of writes pending' },
+ writes_pending_flush_list => { hdr => 'Flush List Writes', num => 1, label => 'Number of flush list writes pending' },
+ writes_pending_lru => { hdr => 'LRU Writes', num => 1, label => 'Number of LRU writes pending' },
+ writes_pending_single_page => { hdr => '1-Page Writes', num => 1, label => 'Number of 1-page writes pending' },
+);
+
+# Apply a default property or three. By default, columns are not width-constrained,
+# aligned left, and sorted alphabetically, not numerically.
+foreach my $col ( values %columns ) {
+ map { $col->{$_} ||= 0 } qw(num minw maxw);
+ $col->{just} = $col->{num} ? '' : '-';
+}
+
+# Filters {{{3
+# This hash defines every filter that can be applied to a table. These
+# become part of tbl_meta as well. Each filter is just an expression that
+# returns true or false.
+# Properties of each entry:
+# * func: the subroutine
+# * name: the name, repeated
+# * user: whether it's a user-defined filter (saved in config)
+# * text: text of the subroutine
+# * note: explanation
+my %filters = ();
+
+# These are pre-processed to live in %filters above, by compiling them.
+my %builtin_filters = (
+ hide_self => {
+ text => <<' END',
+ return ( ($set->{info} || '') !~ m#/\*innotop\*/# );
+ END
+ note => 'Removes the innotop processes from the list',
+ tbls => [qw(innodb_transactions processlist)],
+ },
+ hide_inactive => {
+ text => <<' END',
+ return ( !defined($set->{txn_status}) || $set->{txn_status} ne 'not started' )
+ && ( !defined($set->{cmd}) || $set->{cmd} !~ m/Sleep|Binlog Dump/ )
+ && ( !defined($set->{state}) || $set->{state} !~ m/^handlersocket/ )
+ && ( !defined($set->{info}) || $set->{info} =~ m/\S/ );
+ END
+ note => 'Removes processes which are not doing anything',
+ tbls => [qw(innodb_transactions processlist)],
+ },
+ hide_connect => {
+ text => <<' END',
+ return ( !defined($set->{cmd}) || $set->{cmd} !~ m/Connect/ );
+ END
+ note => 'Removes the slave processes from the list',
+ tbls => [qw(processlist)],
+ },
+ hide_slave_io => {
+ text => <<' END',
+ return !$set->{state} || $set->{state} !~ m/^(?:Waiting for master|read all relay)/;
+ END
+ note => 'Removes slave I/O threads from the list',
+ tbls => [qw(processlist slave_io_status)],
+ },
+ hide_event => {
+ text => <<' END',
+ return (($set->{state} || '') !~ m/^Daemon/) || (($set->{info} || '') !~ m/\S/);
+ END
+ note => 'Removes idle event threads from the list',
+ tbls => [qw(processlist)],
+ },
+ table_is_open => {
+ text => <<' END',
+ return $set->{num_times_open} + $set->{is_name_locked};
+ END
+ note => 'Removes tables that are not in use or locked',
+ tbls => [qw(open_tables)],
+ },
+ cxn_is_master => {
+ text => <<' END',
+ return $set->{master_file} ? 1 : 0;
+ END
+ note => 'Removes servers that are not masters',
+ tbls => [qw(master_status)],
+ },
+ cxn_is_slave => {
+ text => <<' END',
+ return $set->{master_host} ? 1 : 0;
+ END
+ note => 'Removes servers that are not slaves',
+ tbls => [qw(slave_io_status slave_sql_status)],
+ },
+ thd_is_not_waiting => {
+ text => <<' END',
+ return $set->{thread_status} !~ m#waiting for i/o request#;
+ END
+ note => 'Removes idle I/O threads',
+ tbls => [qw(io_threads)],
+ },
+);
+foreach my $key ( keys %builtin_filters ) {
+ my ( $sub, $err ) = compile_filter($builtin_filters{$key}->{text});
+ $filters{$key} = {
+ func => $sub,
+ text => $builtin_filters{$key}->{text},
+ user => 0,
+ name => $key, # useful for later
+ note => $builtin_filters{$key}->{note},
+ tbls => $builtin_filters{$key}->{tbls},
+ }
+}
+
+# Variable sets {{{3
+# Sets (arrayrefs) of variables that are used in S mode. They are read/written to
+# the config file.
+my %var_sets = (
+ general => {
+ text => join(
+ ', ',
+ 'set_precision(Questions/Uptime_hires) as QPS',
+ 'set_precision(Com_commit/Uptime_hires) as Commit_PS',
+ 'set_precision((Com_rollback||0)/(Com_commit||1)) as Rollback_Commit',
+ 'set_precision(('
+ . join('+', map { "($_||0)" }
+ qw(Com_delete Com_delete_multi Com_insert Com_insert_select Com_replace
+ Com_replace_select Com_select Com_update Com_update_multi))
+ . ')/(Com_commit||1)) as Write_Commit',
+ 'set_precision((Com_select+(Qcache_hits||0))/(('
+ . join('+', map { "($_||0)" }
+ qw(Com_delete Com_delete_multi Com_insert Com_insert_select Com_replace
+ Com_replace_select Com_select Com_update Com_update_multi))
+ . ')||1)) as R_W_Ratio',
+ 'set_precision(Opened_tables/Uptime_hires) as Opens_PS',
+ 'percent($cur->{Open_tables}/($cur->{table_cache})) as Table_Cache_Used',
+ 'set_precision(Threads_created/Uptime_hires) as Threads_PS',
+ 'percent($cur->{Threads_cached}/($cur->{thread_cache_size}||1)) as Thread_Cache_Used',
+ 'percent($cur->{Max_used_connections}/($cur->{max_connections}||1)) as CXN_Used_Ever',
+ 'percent($cur->{Threads_connected}/($cur->{max_connections}||1)) as CXN_Used_Now',
+ ),
+ },
+ commands => {
+ text => join(
+ ', ',
+ qw(Uptime Questions Com_delete Com_delete_multi Com_insert
+ Com_insert_select Com_replace Com_replace_select Com_select Com_update
+ Com_update_multi)
+ ),
+ },
+ query_status => {
+ text => join(
+ ',',
+ qw( Uptime Select_full_join Select_full_range_join Select_range
+ Select_range_check Select_scan Slow_queries Sort_merge_passes
+ Sort_range Sort_rows Sort_scan)
+ ),
+ },
+ innodb => {
+ text => join(
+ ',',
+ qw( Uptime Innodb_row_lock_current_waits Innodb_row_lock_time
+ Innodb_row_lock_time_avg Innodb_row_lock_time_max Innodb_row_lock_waits
+ Innodb_rows_deleted Innodb_rows_inserted Innodb_rows_read
+ Innodb_rows_updated)
+ ),
+ },
+ txn => {
+ text => join(
+ ',',
+ qw( Uptime Com_begin Com_commit Com_rollback Com_savepoint
+ Com_xa_commit Com_xa_end Com_xa_prepare Com_xa_recover Com_xa_rollback
+ Com_xa_start)
+ ),
+ },
+ key_cache => {
+ text => join(
+ ',',
+ qw( Uptime Key_blocks_not_flushed Key_blocks_unused Key_blocks_used
+ Key_read_requests Key_reads Key_write_requests Key_writes )
+ ),
+ },
+ query_cache => {
+ text => join(
+ ',',
+ "percent($exprs{QcacheHitRatio}) as Hit_Pct",
+ 'set_precision((Qcache_hits||0)/(Qcache_inserts||1)) as Hit_Ins',
+ 'set_precision((Qcache_lowmem_prunes||0)/Uptime_hires) as Lowmem_Prunes_sec',
+ 'percent(1-((Qcache_free_blocks||0)/(Qcache_total_blocks||1))) as Blocks_used',
+ qw( Qcache_free_blocks Qcache_free_memory Qcache_not_cached Qcache_queries_in_cache)
+ ),
+ },
+ handler => {
+ text => join(
+ ',',
+ qw( Uptime Handler_read_key Handler_read_first Handler_read_next
+ Handler_read_prev Handler_read_rnd Handler_read_rnd_next Handler_delete
+ Handler_update Handler_write)
+ ),
+ },
+ cxns_files_threads => {
+ text => join(
+ ',',
+ qw( Uptime Aborted_clients Aborted_connects Bytes_received Bytes_sent
+ Compression Connections Created_tmp_disk_tables Created_tmp_files
+ Created_tmp_tables Max_used_connections Open_files Open_streams
+ Open_tables Opened_tables Table_locks_immediate Table_locks_waited
+ Threads_cached Threads_connected Threads_created Threads_running)
+ ),
+ },
+ prep_stmt => {
+ text => join(
+ ',',
+ qw( Uptime Com_dealloc_sql Com_execute_sql Com_prepare_sql Com_reset
+ Com_stmt_close Com_stmt_execute Com_stmt_fetch Com_stmt_prepare
+ Com_stmt_reset Com_stmt_send_long_data )
+ ),
+ },
+ innodb_health => {
+ text => join(
+ ',',
+ "$exprs{OldVersions} as OldVersions",
+ qw(IB_sm_mutex_spin_waits IB_sm_mutex_spin_rounds IB_sm_mutex_os_waits),
+ "$exprs{NumTxns} as NumTxns",
+ "$exprs{MaxTxnTime} as MaxTxnTime",
+ qw(IB_ro_queries_inside IB_ro_queries_in_queue),
+ "set_precision($exprs{DirtyBufs} * 100) as dirty_bufs",
+ "set_precision($exprs{BufPoolFill} * 100) as buf_fill",
+ qw(IB_bp_pages_total IB_bp_pages_read IB_bp_pages_written IB_bp_pages_created)
+ ),
+ },
+ innodb_health2 => {
+ text => join(
+ ', ',
+ 'percent(1-((Innodb_buffer_pool_pages_free||0)/($cur->{Innodb_buffer_pool_pages_total}||1))) as BP_page_cache_usage',
+ 'percent(1-((Innodb_buffer_pool_reads||0)/(Innodb_buffer_pool_read_requests||1))) as BP_cache_hit_ratio',
+ 'Innodb_buffer_pool_wait_free',
+ 'Innodb_log_waits',
+ ),
+ },
+ slow_queries => {
+ text => join(
+ ', ',
+ 'set_precision(Slow_queries/Uptime_hires) as Slow_PS',
+ 'set_precision(Select_full_join/Uptime_hires) as Full_Join_PS',
+ 'percent(Select_full_join/(Com_select||1)) as Full_Join_Ratio',
+ ),
+ },
+);
+
+# Server sets {{{3
+# Defines sets of servers between which the user can quickly switch.
+my %server_groups;
+
+# Connections {{{3
+# This hash defines server connections. Each connection is a string that can be passed to
+# the DBI connection. These are saved in the connections section in the config file.
+my %connections;
+# Defines the parts of connections.
+my @conn_parts = qw(user have_user pass have_pass dsn savepass dl_table);
+
+# Graph widths {{{3
+# This hash defines the max values seen for various status/variable values, for graphing.
+# These are stored in their own section in the config file. These are just initial values:
+my %mvs = (
+ Com_select => 50,
+ Com_insert => 50,
+ Com_update => 50,
+ Com_delete => 50,
+ Questions => 100,
+);
+
+# ###########################################################################
+# Valid Term::ANSIColor color strings.
+# ###########################################################################
+my %ansicolors = map { $_ => 1 }
+ qw( black blink blue bold clear concealed cyan dark green magenta on_black
+ on_blue on_cyan on_green on_magenta on_red on_white on_yellow red reset
+ reverse underline underscore white yellow);
+
+# ###########################################################################
+# Valid comparison operators for color rules
+# ###########################################################################
+my %comp_ops = (
+ '==' => 'Numeric equality',
+ '>' => 'Numeric greater-than',
+ '<' => 'Numeric less-than',
+ '>=' => 'Numeric greater-than/equal',
+ '<=' => 'Numeric less-than/equal',
+ '!=' => 'Numeric not-equal',
+ 'eq' => 'String equality',
+ 'gt' => 'String greater-than',
+ 'lt' => 'String less-than',
+ 'ge' => 'String greater-than/equal',
+ 'le' => 'String less-than/equal',
+ 'ne' => 'String not-equal',
+ '=~' => 'Pattern match',
+ '!~' => 'Negated pattern match',
+);
+
+# ###########################################################################
+# Valid aggregate functions.
+# ###########################################################################
+my %agg_funcs = (
+ first => sub {
+ return $_[0]
+ },
+ count => sub {
+ return 0 + @_;
+ },
+ avg => sub {
+ my @args = grep { defined $_ } @_;
+ return (sum(map { m/([\d\.-]+)/g } @args) || 0) / (scalar(@args) || 1);
+ },
+ sum => sub {
+ my @args = grep { defined $_ } @_;
+ return sum(@args);
+ }
+);
+
+# ###########################################################################
+# Valid functions for transformations.
+# ###########################################################################
+my %trans_funcs = (
+ shorten => \&shorten,
+ secs_to_time => \&secs_to_time,
+ distill => \&distill,
+ no_ctrl_char => \&no_ctrl_char,
+ percent => \&percent,
+ commify => \&commify,
+ dulint_to_int => \&dulint_to_int,
+ set_precision => \&set_precision,
+ fuzzy_time => \&fuzzy_time,
+);
+
+# Table definitions {{{3
+# This hash defines every table that can get displayed in every mode. Each
+# table specifies columns and column data sources. The column is
+# defined by the %columns hash.
+#
+# Example: foo => { src => 'bar' } means the foo column (look at
+# $columns{foo} for its definition) gets its data from the 'bar' element of
+# the current data set, whatever that is.
+#
+# These columns are post-processed after being defined, because they get stuff
+# from %columns. After all the config is loaded for columns, there's more
+# post-processing too; the subroutines compiled from src get added to
+# the hash elements for extract_values to use.
+# ###########################################################################
+
+my %tbl_meta = (
+ adaptive_hash_index => {
+ capt => 'Adaptive Hash Index',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ hash_table_size => { src => 'IB_ib_hash_table_size', trans => [qw(shorten)], },
+ used_cells => { src => 'IB_ib_used_cells' },
+ bufs_in_node_heap => { src => 'IB_ib_bufs_in_node_heap' },
+ hash_searches_s => { src => 'IB_ib_hash_searches_s' },
+ non_hash_searches_s => { src => 'IB_ib_non_hash_searches_s' },
+ },
+ visible => [ qw(cxn hash_table_size used_cells bufs_in_node_heap hash_searches_s non_hash_searches_s) ],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => 'ib',
+ group_by => [],
+ aggregate => 0,
+ },
+ buffer_pool => {
+ capt => 'Buffer Pool',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ total_mem_alloc => { src => 'IB_bp_total_mem_alloc', trans => [qw(shorten)], },
+ awe_mem_alloc => { src => 'IB_bp_awe_mem_alloc', trans => [qw(shorten)], },
+ add_pool_alloc => { src => 'IB_bp_add_pool_alloc', trans => [qw(shorten)], },
+ buf_pool_size => { src => 'IB_bp_buf_pool_size', trans => [qw(shorten)], },
+ buf_free => { src => 'IB_bp_buf_free' },
+ buf_pool_hit_rate => { src => 'IB_bp_buf_pool_hit_rate' },
+ buf_pool_reads => { src => 'IB_bp_buf_pool_reads' },
+ buf_pool_hits => { src => 'IB_bp_buf_pool_hits' },
+ dict_mem_alloc => { src => 'IB_bp_dict_mem_alloc' },
+ pages_total => { src => 'IB_bp_pages_total' },
+ pages_modified => { src => 'IB_bp_pages_modified' },
+ reads_pending => { src => 'IB_bp_reads_pending' },
+ writes_pending => { src => 'IB_bp_writes_pending' },
+ writes_pending_lru => { src => 'IB_bp_writes_pending_lru' },
+ writes_pending_flush_list => { src => 'IB_bp_writes_pending_flush_list' },
+ writes_pending_single_page => { src => 'IB_bp_writes_pending_single_page' },
+ page_creates_sec => { src => 'IB_bp_page_creates_sec' },
+ page_reads_sec => { src => 'IB_bp_page_reads_sec' },
+ page_writes_sec => { src => 'IB_bp_page_writes_sec' },
+ pages_created => { src => 'IB_bp_pages_created' },
+ pages_read => { src => 'IB_bp_pages_read' },
+ pages_written => { src => 'IB_bp_pages_written' },
+ },
+ visible => [ qw(cxn buf_pool_size buf_free pages_total pages_modified buf_pool_hit_rate total_mem_alloc add_pool_alloc)],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => 'bp',
+ group_by => [],
+ aggregate => 0,
+ },
+ # TODO: a new step in set_to_tbl: join result to itself, grouped?
+ # TODO: this would also enable pulling Q and T data together.
+ # TODO: using a SQL-ish language would also allow pivots to be easier -- treat the pivoted data as a view and SELECT from it.
+ cmd_summary => {
+ capt => 'Command Summary',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ name => { src => 'name' },
+ total => { src => 'total' },
+ value => { src => 'value', agg => 'sum'},
+ pct => { src => 'value/total', trans => [qw(percent)] },
+ last_total => { src => 'last_total' },
+ last_value => { src => 'last_value', agg => 'sum'},
+ last_pct => { src => 'last_value/last_total', trans => [qw(percent)] },
+ },
+ visible => [qw(cxn name value pct last_value last_pct)],
+ filters => [qw()],
+ sort_cols => '-value',
+ sort_dir => '1',
+ innodb => '',
+ group_by => [qw(name)],
+ aggregate => 1,
+ },
+ deadlock_locks => {
+ capt => 'Deadlock Locks',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ mysql_thread_id => { src => 'mysql_thread_id' },
+ dl_txn_num => { src => 'dl_txn_num' },
+ lock_type => { src => 'lock_type' },
+ space_id => { src => 'space_id' },
+ page_no => { src => 'page_no' },
+ heap_no => { src => 'heap_no' },
+ n_bits => { src => 'n_bits' },
+ index => { src => 'index' },
+ db => { src => 'db' },
+ tbl => { src => 'table' },
+ lock_mode => { src => 'lock_mode' },
+ special => { src => 'special' },
+ insert_intention => { src => 'insert_intention' },
+ waiting => { src => 'waiting' },
+ },
+ visible => [ qw(cxn mysql_thread_id waiting lock_mode db tbl index special insert_intention)],
+ filters => [],
+ sort_cols => 'cxn mysql_thread_id',
+ sort_dir => '1',
+ innodb => 'dl',
+ group_by => [],
+ aggregate => 0,
+ },
+ deadlock_transactions => {
+ capt => 'Deadlock Transactions',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ active_secs => { src => 'active_secs' },
+ dl_txn_num => { src => 'dl_txn_num' },
+ has_read_view => { src => 'has_read_view' },
+ heap_size => { src => 'heap_size' },
+ host_and_domain => { src => 'hostname' },
+ hostname => { src => $exprs{Host} },
+ ip => { src => 'ip' },
+ lock_structs => { src => 'lock_structs' },
+ lock_wait_time => { src => 'lock_wait_time', trans => [ qw(secs_to_time) ] },
+ mysql_thread_id => { src => 'mysql_thread_id' },
+ os_thread_id => { src => 'os_thread_id' },
+ proc_no => { src => 'proc_no' },
+ query_id => { src => 'query_id' },
+ query_status => { src => 'query_status' },
+ query_text => { src => 'query_text', trans => [ qw(no_ctrl_char) ] },
+ row_locks => { src => 'row_locks' },
+ tables_in_use => { src => 'tables_in_use' },
+ tables_locked => { src => 'tables_locked' },
+ thread_decl_inside => { src => 'thread_decl_inside' },
+ thread_status => { src => 'thread_status' },
+ 'time' => { src => 'active_secs', trans => [ qw(secs_to_time) ] },
+ timestring => { src => 'timestring' },
+ txn_doesnt_see_ge => { src => 'txn_doesnt_see_ge' },
+ txn_id => { src => 'txn_id' },
+ txn_sees_lt => { src => 'txn_sees_lt' },
+ txn_status => { src => 'txn_status' },
+ truncates => { src => 'truncates' },
+ undo_log_entries => { src => 'undo_log_entries' },
+ user => { src => 'user' },
+ victim => { src => 'victim' },
+ wait_status => { src => 'lock_wait_status' },
+ },
+ visible => [ qw(cxn mysql_thread_id timestring user hostname victim time undo_log_entries lock_structs query_text)],
+ filters => [],
+ sort_cols => 'cxn mysql_thread_id',
+ sort_dir => '1',
+ innodb => 'dl',
+ group_by => [],
+ aggregate => 0,
+ },
+ explain => {
+ capt => 'EXPLAIN Results',
+ cust => {},
+ cols => {
+ part_id => { src => 'id' },
+ select_type => { src => 'select_type' },
+ tbl => { src => 'table' },
+ partitions => { src => 'partitions' },
+ scan_type => { src => 'type' },
+ possible_keys => { src => 'possible_keys' },
+ index => { src => 'key' },
+ key_len => { src => 'key_len' },
+ index_ref => { src => 'ref' },
+ num_rows => { src => 'rows' },
+ special => { src => 'extra' },
+ },
+ visible => [ qw(select_type tbl partitions scan_type possible_keys index key_len index_ref num_rows special)],
+ filters => [],
+ sort_cols => '',
+ sort_dir => '1',
+ innodb => '',
+ group_by => [],
+ aggregate => 0,
+ },
+ file_io_misc => {
+ capt => 'File I/O Misc',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ io_bytes_s => { src => 'IB_io_avg_bytes_s' },
+ io_flush_type => { src => 'IB_io_flush_type' },
+ io_fsyncs_s => { src => 'IB_io_fsyncs_s' },
+ io_reads_s => { src => 'IB_io_reads_s' },
+ io_writes_s => { src => 'IB_io_writes_s' },
+ os_file_reads => { src => 'IB_io_os_file_reads' },
+ os_file_writes => { src => 'IB_io_os_file_writes' },
+ os_fsyncs => { src => 'IB_io_os_fsyncs' },
+ },
+ visible => [ qw(cxn os_file_reads os_file_writes os_fsyncs io_reads_s io_writes_s io_bytes_s)],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => 'io',
+ group_by => [],
+ aggregate => 0,
+ },
+ fk_error => {
+ capt => 'Foreign Key Error Info',
+ cust => {},
+ cols => {
+ timestring => { src => 'IB_fk_timestring' },
+ child_db => { src => 'IB_fk_child_db' },
+ child_table => { src => 'IB_fk_child_table' },
+ child_index => { src => 'IB_fk_child_index' },
+ fk_name => { src => 'IB_fk_fk_name' },
+ parent_db => { src => 'IB_fk_parent_db' },
+ parent_table => { src => 'IB_fk_parent_table' },
+ parent_col => { src => 'IB_fk_parent_col' },
+ parent_index => { src => 'IB_fk_parent_index' },
+ attempted_op => { src => 'IB_fk_attempted_op' },
+ },
+ visible => [ qw(timestring child_db child_table child_index parent_db parent_table parent_col parent_index fk_name attempted_op)],
+ filters => [],
+ sort_cols => '',
+ sort_dir => '1',
+ innodb => 'fk',
+ group_by => [],
+ aggregate => 0,
+ },
+ index_statistics => {
+ capt => 'Data from INDEX_STATISTICS',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn', minw => 6, maxw => 10 },
+ db => { src => 'table_schema' },
+ tbl => { src => 'table_name' },
+ index => { src => 'index_name' },
+ rows_read => { src => 'rows_read', agg => 'sum' },
+ },
+ visible => [ qw(cxn db tbl index rows_read) ],
+ filters => [ ],
+ sort_cols => 'rows_read',
+ sort_dir => '-1',
+ innodb => '',
+ colors => [],
+ hide_caption => 1,
+ group_by => [qw(cxn db tbl)],
+ aggregate => 0,
+ },
+ index_table_statistics => {
+ capt => 'Data from {TABLE,INDEX}_STATISTICS',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn', minw => 6, maxw => 10 },
+ db => { src => 'table_schema' },
+ tbl => { src => 'table_name' },
+ index => { src => 'index_name' },
+ rows_read => { src => 'rows_read' },
+ rows_read_from_indexes => { src => 'rows_read_from_indexes' },
+ rows_changed => { src => 'rows_changed' },
+ rows_changed_x_indexes => { src => 'rows_changed_x_indexes' },
+ },
+ visible => [ qw(cxn db tbl rows_read rows_read_from_indexes rows_changed rows_changed_x_indexes) ],
+ filters => [ ],
+ sort_cols => 'rows_read',
+ sort_dir => '-1',
+ innodb => '',
+ colors => [],
+ hide_caption => 1,
+ group_by => [qw(cxn db tbl)],
+ aggregate => 0,
+ },
+ insert_buffers => {
+ capt => 'Insert Buffers',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ inserts => { src => 'IB_ib_inserts' },
+ merged_recs => { src => 'IB_ib_merged_recs' },
+ merges => { src => 'IB_ib_merges' },
+ size => { src => 'IB_ib_size' },
+ free_list_len => { src => 'IB_ib_free_list_len' },
+ seg_size => { src => 'IB_ib_seg_size' },
+ },
+ visible => [ qw(cxn inserts merged_recs merges size free_list_len seg_size)],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => 'ib',
+ group_by => [],
+ aggregate => 0,
+ },
+ innodb_blocked_blocker => {
+ capt => 'InnoDB Blocked/Blocking',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ waiting_thread => { src => 'waiting_thread' },
+ waiting_query => { src => 'waiting_query', trans => [qw(distill)] },
+ waiting_rows_modified => { src => 'waiting_rows_modified' },
+ waiting_age => { src => 'waiting_age', trans => [qw(fuzzy_time)] },
+ waiting_wait_secs => { src => 'waiting_wait_secs', trans => [qw(fuzzy_time)] },
+ waiting_user => { src => 'waiting_user' },
+ waiting_host => { src => 'waiting_host' },
+ waiting_db => { src => 'waiting_db' },
+ blocking_thread => { src => 'blocking_thread' },
+ blocking_query => { src => 'blocking_query', trans => [qw(distill)] },
+ blocking_rows_modified => { src => 'blocking_rows_modified' },
+ blocking_age => { src => 'blocking_age', trans => [qw(fuzzy_time)] },
+ blocking_wait_secs => { src => 'blocking_wait_secs', trans => [qw(fuzzy_time)] },
+ blocking_user => { src => 'blocking_user' },
+ blocking_host => { src => 'blocking_host' },
+ blocking_db => { src => 'blocking_db' },
+ blocking_status => { src => 'blocking_status' },
+ lock_info => { src => 'lock_info' },
+ },
+ visible => [ qw(cxn waiting_thread waiting_query waiting_wait_secs
+ blocking_thread blocking_rows_modified blocking_age blocking_wait_secs
+ blocking_status blocking_query)],
+ filters => [],
+ sort_cols => 'cxn -waiting_wait_secs',
+ sort_dir => '1',
+ innodb => 'tx',
+ colors => [
+ ],
+ group_by => [],
+ aggregate => 0,
+ hide_caption => 1,
+ },
+ innodb_locks => {
+ capt => 'InnoDB Locks',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ db => { src => 'db' },
+ index => { src => 'index' },
+ insert_intention => { src => 'insert_intention' },
+ lock_mode => { src => 'lock_mode' },
+ lock_type => { src => 'lock_type' },
+ lock_wait_time => { src => 'lock_wait_time', trans => [ qw(secs_to_time) ] },
+ mysql_thread_id => { src => 'mysql_thread_id' },
+ n_bits => { src => 'n_bits' },
+ page_no => { src => 'page_no' },
+ space_id => { src => 'space_id' },
+ special => { src => 'special' },
+ tbl => { src => 'table' },
+ 'time' => { src => 'active_secs', hdr => 'Active', trans => [ qw(secs_to_time) ] },
+ txn_id => { src => 'txn_id' },
+ waiting => { src => 'waiting' },
+ },
+ visible => [ qw(cxn mysql_thread_id lock_type waiting lock_wait_time time lock_mode db tbl index insert_intention special)],
+ filters => [],
+ sort_cols => 'cxn -lock_wait_time',
+ sort_dir => '1',
+ innodb => 'tx',
+ colors => [
+ { col => 'lock_wait_time', op => '>', arg => 60, color => 'red' },
+ { col => 'lock_wait_time', op => '>', arg => 30, color => 'yellow' },
+ { col => 'lock_wait_time', op => '>', arg => 10, color => 'green' },
+ ],
+ group_by => [],
+ aggregate => 0,
+ },
+ innodb_transactions => {
+ capt => 'InnoDB Transactions',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ active_secs => { src => 'active_secs' },
+ has_read_view => { src => 'has_read_view' },
+ heap_size => { src => 'heap_size' },
+ hostname => { src => $exprs{Host} },
+ ip => { src => 'ip' },
+ wait_status => { src => 'lock_wait_status' },
+ lock_wait_time => { src => 'lock_wait_time', trans => [ qw(secs_to_time) ] },
+ lock_structs => { src => 'lock_structs' },
+ mysql_thread_id => { src => 'mysql_thread_id' },
+ os_thread_id => { src => 'os_thread_id' },
+ proc_no => { src => 'proc_no' },
+ query_id => { src => 'query_id' },
+ query_status => { src => 'query_status' },
+ query_text => { src => 'query_text', trans => [ qw(no_ctrl_char) ] },
+ txn_time_remain => { src => $exprs{TxnTimeRemain}, trans => [ qw(secs_to_time) ] },
+ row_locks => { src => 'row_locks' },
+ tables_in_use => { src => 'tables_in_use' },
+ tables_locked => { src => 'tables_locked' },
+ thread_decl_inside => { src => 'thread_decl_inside' },
+ thread_status => { src => 'thread_status' },
+ 'time' => { src => 'active_secs', trans => [ qw(secs_to_time) ], agg => 'sum' },
+ txn_doesnt_see_ge => { src => 'txn_doesnt_see_ge' },
+ txn_id => { src => 'txn_id' },
+ txn_sees_lt => { src => 'txn_sees_lt' },
+ txn_status => { src => 'txn_status', minw => 10, maxw => 10 },
+ undo_log_entries => { src => 'undo_log_entries' },
+ user => { src => 'user', maxw => 10 },
+ cnt => { src => 'mysql_thread_id', minw => 0 },
+ },
+ visible => [ qw(cxn cnt mysql_thread_id user hostname txn_status time undo_log_entries query_text)],
+ filters => [ qw( hide_self hide_inactive ) ],
+ sort_cols => '-active_secs txn_status cxn mysql_thread_id',
+ sort_dir => '1',
+ innodb => 'tx',
+ hide_caption => 1,
+ colors => [
+ { col => 'wait_status', op => 'eq', arg => 'LOCK WAIT', color => 'black on_red' },
+ { col => 'time', op => '>', arg => 600, color => 'red' },
+ { col => 'time', op => '>', arg => 300, color => 'yellow' },
+ { col => 'time', op => '>', arg => 60, color => 'green' },
+ { col => 'time', op => '>', arg => 30, color => 'cyan' },
+ { col => 'txn_status', op => 'eq', arg => 'not started', color => 'white' },
+ ],
+ group_by => [ qw(cxn txn_status) ],
+ aggregate => 0,
+ },
+ io_threads => {
+ capt => 'I/O Threads',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ thread => { src => 'thread' },
+ thread_purpose => { src => 'purpose' },
+ event_set => { src => 'event_set' },
+ thread_status => { src => 'state' },
+ },
+ visible => [ qw(cxn thread thread_purpose thread_status)],
+ filters => [ qw() ],
+ sort_cols => 'cxn thread',
+ sort_dir => '1',
+ innodb => 'io',
+ group_by => [],
+ aggregate => 0,
+ },
+ log_statistics => {
+ capt => 'Log Statistics',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ last_chkp => { src => 'IB_lg_last_chkp' },
+ log_flushed_to => { src => 'IB_lg_log_flushed_to' },
+ log_ios_done => { src => 'IB_lg_log_ios_done' },
+ log_ios_s => { src => 'IB_lg_log_ios_s' },
+ log_seq_no => { src => 'IB_lg_log_seq_no' },
+ pending_chkp_writes => { src => 'IB_lg_pending_chkp_writes' },
+ pending_log_writes => { src => 'IB_lg_pending_log_writes' },
+ },
+ visible => [ qw(cxn log_seq_no log_flushed_to last_chkp log_ios_done log_ios_s)],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => 'lg',
+ group_by => [],
+ aggregate => 0,
+ },
+ master_status => {
+ capt => 'Master Status',
+ cust => {},
+ cols => {
+ cxn => { src => $exprs{chcxn_2_cxn}, hdr => 'CXN' },
+ binlog_do_db => { src => 'binlog_do_db' },
+ binlog_ignore_db => { src => 'binlog_ignore_db' },
+ master_file => { src => 'file' },
+ master_pos => { src => 'position' },
+ binlog_cache_overflow => { src => '(Binlog_cache_disk_use||0)/(Binlog_cache_use||1)', trans => [ qw(percent) ] },
+ executed_gtid_set => { src => '(executed_gtid_set||"N/A")' },
+ server_uuid => { src => '(server_uuid||"N/A")' },
+ channel_name => { src => $exprs{chcxn_2_ch}, hdr => 'Channel'},
+ },
+ visible => [ qw(cxn channel_name master_file master_pos binlog_cache_overflow executed_gtid_set server_uuid)],
+ filters => [ qw(cxn_is_master) ],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => '',
+ group_by => [qw(channel_name)],
+ aggregate => 0,
+ },
+ pending_io => {
+ capt => 'Pending I/O',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ p_normal_aio_reads => { src => 'IB_io_pending_normal_aio_reads' },
+ p_aio_writes => { src => 'IB_io_pending_aio_writes' },
+ p_ibuf_aio_reads => { src => 'IB_io_pending_ibuf_aio_reads' },
+ p_sync_ios => { src => 'IB_io_pending_sync_ios' },
+ p_buf_pool_flushes => { src => 'IB_io_pending_buffer_pool_flushes' },
+ p_log_flushes => { src => 'IB_io_pending_log_flushes' },
+ p_log_ios => { src => 'IB_io_pending_log_ios' },
+ p_preads => { src => 'IB_io_pending_preads' },
+ p_pwrites => { src => 'IB_io_pending_pwrites' },
+ },
+ visible => [ qw(cxn p_normal_aio_reads p_aio_writes p_ibuf_aio_reads p_sync_ios p_log_flushes p_log_ios)],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => 'io',
+ group_by => [],
+ aggregate => 0,
+ },
+ open_tables => {
+ capt => 'Open Tables',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ db => { src => 'database' },
+ tbl => { src => 'table' },
+ num_times_open => { src => 'in_use' },
+ is_name_locked => { src => 'name_locked' },
+ },
+ visible => [ qw(cxn db tbl num_times_open is_name_locked)],
+ filters => [ qw(table_is_open) ],
+ sort_cols => '-num_times_open cxn db tbl',
+ sort_dir => '1',
+ innodb => '',
+ group_by => [],
+ aggregate => 0,
+ },
+ page_statistics => {
+ capt => 'Page Statistics',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ pages_read => { src => 'IB_bp_pages_read' },
+ pages_written => { src => 'IB_bp_pages_written' },
+ pages_created => { src => 'IB_bp_pages_created' },
+ page_reads_sec => { src => 'IB_bp_page_reads_sec' },
+ page_writes_sec => { src => 'IB_bp_page_writes_sec' },
+ page_creates_sec => { src => 'IB_bp_page_creates_sec' },
+ },
+ visible => [ qw(cxn pages_read pages_written pages_created page_reads_sec page_writes_sec page_creates_sec)],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => 'bp',
+ group_by => [],
+ aggregate => 0,
+ },
+ processlist => {
+ capt => 'MySQL Process List',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn', minw => 6, maxw => 10 },
+ mysql_thread_id => { src => 'id', minw => 6, maxw => 0 },
+ user => { src => 'user', minw => 5, maxw => 8 },
+ hostname => { src => $exprs{Host}, minw => 7, maxw => 15, },
+ port => { src => $exprs{Port}, minw => 0, maxw => 0, },
+ host_and_port => { src => 'host', minw => 0, maxw => 0 },
+ db => { src => 'db', minw => 6, maxw => 12 },
+ cmd => { src => 'command', minw => 5, maxw => 0 },
+ time => { src => 'time', minw => 5, maxw => 0, trans => [ qw(secs_to_time) ], agg => 'sum' },
+ state => { src => 'state', minw => 0, maxw => 0 },
+ info => { src => 'info', minw => 0, maxw => 0, trans => [ qw(no_ctrl_char) ] },
+ cnt => { src => 'id', minw => 0, maxw => 0 },
+ },
+ visible => [ qw(cxn cmd cnt mysql_thread_id state user hostname db time info)],
+ filters => [ qw(hide_self hide_inactive hide_slave_io hide_event hide_connect) ],
+ sort_cols => '-time cxn hostname mysql_thread_id',
+ sort_dir => '1',
+ innodb => '',
+ hide_caption => 1,
+ colors => [
+ { col => 'state', op => 'eq', arg => 'Locked', color => 'black on_red' },
+ { col => 'cmd', op => 'eq', arg => 'Sleep', color => 'white' },
+ { col => 'user', op => 'eq', arg => 'system user', color => 'white' },
+ { col => 'cmd', op => 'eq', arg => 'Connect', color => 'white' },
+ { col => 'cmd', op => 'eq', arg => 'Binlog Dump', color => 'white' },
+ { col => 'time', op => '>', arg => 600, color => 'red' },
+ { col => 'time', op => '>', arg => 120, color => 'yellow' },
+ { col => 'time', op => '>', arg => 60, color => 'green' },
+ { col => 'time', op => '>', arg => 30, color => 'cyan' },
+ ],
+ group_by => [qw(cxn cmd)],
+ aggregate => 0,
+ },
+
+ # TODO: some more columns:
+ # kb_used=hdr='BufUsed' minw='0' num='0' src='percent(1 - ((Key_blocks_unused * key_cache_block_size) / (key_buffer_size||1)))' dec='0' trans='' tbl='q_header' just='-' user='1' maxw='0' label='User-defined'
+ # retries=hdr='Retries' minw='0' num='0' src='Slave_retried_transactions' dec='0' trans='' tbl='slave_sql_status' just='-' user='1' maxw='0' label='User-defined'
+ # thd=hdr='Thd' minw='0' num='0' src='Threads_connected' dec='0' trans='' tbl='slave_sql_status' just='-' user='1' maxw='0' label='User-defined'
+
+ q_header => {
+ capt => 'Q-mode Header',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ questions => { src => 'Questions' },
+ qps => { src => 'Questions/Uptime_hires', dec => 1, trans => [qw(shorten)] },
+ load => { src => $exprs{ServerLoad}, dec => 1, trans => [qw(shorten)] },
+ connections => { src => $exprs{Connection}, dec => 1, trans => [qw(shorten)] },
+ slow => { src => 'Slow_queries', dec => 1, trans => [qw(shorten)] },
+ q_cache_hit => { src => $exprs{QcacheHitRatio}, dec => 1, trans => [qw(percent)] },
+ key_buffer_hit => { src => '1-(Key_reads/(Key_read_requests||1))', dec => 1, trans => [qw(percent)] },
+ bps_in => { src => 'Bytes_received/Uptime_hires', dec => 1, trans => [qw(shorten)] },
+ bps_out => { src => 'Bytes_sent/Uptime_hires', dec => 1, trans => [qw(shorten)] },
+ when => { src => 'when' },
+ q_detail => { src => $exprs{QueryDetail} },
+ },
+ visible => [ qw(cxn when load connections qps slow q_detail q_cache_hit key_buffer_hit bps_in bps_out)],
+ filters => [],
+ sort_cols => 'when cxn',
+ sort_dir => '1',
+ innodb => '',
+ hide_caption => 1,
+ group_by => [],
+ aggregate => 0,
+ },
+ row_operations => {
+ capt => 'InnoDB Row Operations',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ num_inserts => { src => 'IB_ro_num_rows_ins' },
+ num_updates => { src => 'IB_ro_num_rows_upd' },
+ num_reads => { src => 'IB_ro_num_rows_read' },
+ num_deletes => { src => 'IB_ro_num_rows_del' },
+ num_inserts_sec => { src => 'IB_ro_ins_sec' },
+ num_updates_sec => { src => 'IB_ro_upd_sec' },
+ num_reads_sec => { src => 'IB_ro_read_sec' },
+ num_deletes_sec => { src => 'IB_ro_del_sec' },
+ },
+ visible => [ qw(cxn num_inserts num_updates num_reads num_deletes num_inserts_sec
+ num_updates_sec num_reads_sec num_deletes_sec)],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => 'ro',
+ group_by => [],
+ aggregate => 0,
+ },
+ row_operation_misc => {
+ capt => 'Row Operation Misc',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ queries_in_queue => { src => 'IB_ro_queries_in_queue' },
+ queries_inside => { src => 'IB_ro_queries_inside' },
+ read_views_open => { src => 'IB_ro_read_views_open' },
+ main_thread_id => { src => 'IB_ro_main_thread_id' },
+ main_thread_proc_no => { src => 'IB_ro_main_thread_proc_no' },
+ main_thread_state => { src => 'IB_ro_main_thread_state' },
+ num_res_ext => { src => 'IB_ro_n_reserved_extents' },
+ },
+ visible => [ qw(cxn queries_in_queue queries_inside read_views_open main_thread_state)],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => 'ro',
+ group_by => [],
+ aggregate => 0,
+ },
+ semaphores => {
+ capt => 'InnoDB Semaphores',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ mutex_os_waits => { src => 'IB_sm_mutex_os_waits' },
+ mutex_spin_rounds => { src => 'IB_sm_mutex_spin_rounds' },
+ mutex_spin_waits => { src => 'IB_sm_mutex_spin_waits' },
+ reservation_count => { src => 'IB_sm_reservation_count' },
+ rw_excl_os_waits => { src => 'IB_sm_rw_excl_os_waits' },
+ rw_excl_spins => { src => 'IB_sm_rw_excl_spins' },
+ rw_shared_os_waits => { src => 'IB_sm_rw_shared_os_waits' },
+ rw_shared_spins => { src => 'IB_sm_rw_shared_spins' },
+ signal_count => { src => 'IB_sm_signal_count' },
+ wait_array_size => { src => 'IB_sm_wait_array_size' },
+ },
+ visible => [ qw(cxn mutex_os_waits mutex_spin_waits mutex_spin_rounds
+ rw_excl_os_waits rw_excl_spins rw_shared_os_waits rw_shared_spins
+ signal_count reservation_count )],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => 'sm',
+ group_by => [],
+ aggregate => 0,
+ },
+ slave_io_status => {
+ capt => 'Slave I/O Status',
+ cust => {},
+ cols => {
+ cxn => { src => $exprs{chcxn_2_cxn}, hdr => 'CXN' },
+ connect_retry => { src => 'connect_retry' },
+ master_host => { src => 'master_host', hdr => 'Master'},
+ master_uuid => { src => '(master_uuid||"N/A")' },
+ master_log_file => { src => 'master_log_file', hdr => 'File' },
+ master_port => { src => 'master_port' },
+ master_ssl_allowed => { src => 'master_ssl_allowed' },
+ master_ssl_ca_file => { src => 'master_ssl_ca_file' },
+ master_ssl_ca_path => { src => 'master_ssl_ca_path' },
+ master_ssl_cert => { src => 'master_ssl_cert' },
+ master_ssl_cipher => { src => 'master_ssl_cipher' },
+ master_ssl_key => { src => 'master_ssl_key' },
+ master_user => { src => 'master_user' },
+ read_master_log_pos => { src => 'read_master_log_pos', hdr => 'Pos' },
+ relay_log_size => { src => 'relay_log_space', trans => [qw(shorten)] },
+ slave_io_running => { src => 'slave_io_running', hdr => 'On?' },
+ slave_io_state => { src => 'slave_io_state', hdr => 'State' },
+ channel_name => { src => $exprs{chcxn_2_ch}, hdr => 'Channel'},
+ },
+ visible => [ qw(cxn channel_name master_host master_uuid slave_io_running master_log_file relay_log_size read_master_log_pos slave_io_state)],
+ filters => [ qw( cxn_is_slave ) ],
+ sort_cols => 'slave_io_running channel_name cxn',
+ colors => [
+ { col => 'slave_io_running', op => 'ne', arg => 'Yes', color => 'black on_red' },
+ ],
+ sort_dir => '1',
+ innodb => '',
+ group_by => [qw(channel_name)],
+ aggregate => 0,
+ },
+ slave_sql_status => {
+ capt => 'Slave SQL Status',
+ cust => {},
+ cols => {
+ cxn => { src => $exprs{chcxn_2_cxn}, hdr => 'CXN' },
+ exec_master_log_pos => { src => 'exec_master_log_pos', hdr => 'Master Pos' },
+ last_errno => { src => 'last_errno' },
+ last_error => { src => 'last_error' },
+ master_host => { src => 'master_host', hdr => 'Master' },
+ master_uuid => { src => '(master_uuid||"N/A")' },
+ relay_log_file => { src => 'relay_log_file' },
+ relay_log_pos => { src => 'relay_log_pos' },
+ relay_log_size => { src => 'relay_log_space', trans => [qw(shorten)] },
+ relay_master_log_file => { src => 'relay_master_log_file', hdr => 'Master File' },
+ replicate_do_db => { src => 'replicate_do_db' },
+ replicate_do_table => { src => 'replicate_do_table' },
+ replicate_ignore_db => { src => 'replicate_ignore_db' },
+ replicate_ignore_table => { src => 'replicate_ignore_table' },
+ replicate_wild_do_table => { src => 'replicate_wild_do_table' },
+ replicate_wild_ignore_table => { src => 'replicate_wild_ignore_table' },
+ skip_counter => { src => 'skip_counter' },
+ slave_sql_running => { src => 'slave_sql_running', hdr => 'On?' },
+ sort_time => { src => 'int(seconds_behind_master/60)' },
+ until_condition => { src => 'until_condition' },
+ until_log_file => { src => 'until_log_file' },
+ until_log_pos => { src => 'until_log_pos' },
+ time_behind_master => { src => 'seconds_behind_master', trans => [ qw(secs_to_time) ] },
+ bytes_behind_master => { src => 'master_log_file && master_log_file eq relay_master_log_file ? read_master_log_pos - exec_master_log_pos : 0', trans => [qw(shorten)] },
+ slave_catchup_rate => { src => $exprs{SlaveCatchupRate}, trans => [ qw(set_precision) ] },
+ slave_open_temp_tables => { src => 'Slave_open_temp_tables' },
+ retrieved_gtid_set => { src => '(retrieved_gtid_set||"N/A")' },
+ executed_gtid_set => { src => '(executed_gtid_set||"N/A")' },
+ channel_name => { src => $exprs{chcxn_2_ch}, hdr => 'Channel'},
+ },
+ visible => [ qw(cxn channel_name master_host master_uuid slave_sql_running time_behind_master slave_catchup_rate slave_open_temp_tables relay_log_pos last_error retrieved_gtid_set executed_gtid_set)],
+ filters => [ qw( cxn_is_slave ) ],
+ sort_cols => 'slave_sql_running -sort_time channel_name cxn',
+ sort_dir => '1',
+ innodb => '',
+ colors => [
+ { col => 'slave_sql_running', op => 'ne', arg => 'Yes', color => 'black on_red' },
+ { col => 'time_behind_master', op => '>', arg => 600, color => 'red' },
+ { col => 'time_behind_master', op => '>', arg => 60, color => 'yellow' },
+ { col => 'time_behind_master', op => '==', arg => 0, color => 'white' },
+ ],
+ group_by => [qw(channel_name)],
+ aggregate => 0,
+ },
+ table_statistics => {
+ capt => 'Data from TABLE_STATISTICS',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn', minw => 6, maxw => 10 },
+ db => { src => 'table_schema' },
+ tbl => { src => 'table_name' },
+ rows_read => { src => 'rows_read' },
+ rows_changed => { src => 'rows_changed' },
+ rows_changed_x_indexes => { src => 'rows_changed_x_indexes' },
+ },
+ visible => [ qw(cxn db tbl rows_read rows_changed rows_changed_x_indexes) ],
+ filters => [ ],
+ sort_cols => 'rows_read',
+ sort_dir => '-1',
+ innodb => '',
+ colors => [],
+ hide_caption => 1,
+ group_by => [],
+ aggregate => 0,
+ },
+ t_header => {
+ capt => 'T-Mode Header',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ dirty_bufs => { src => $exprs{DirtyBufs}, trans => [qw(percent)] },
+ history_list_len => { src => 'IB_tx_history_list_len' },
+ lock_structs => { src => 'IB_tx_num_lock_structs' },
+ num_txns => { src => $exprs{NumTxns} },
+ max_txn => { src => $exprs{MaxTxnTime}, trans => [qw(secs_to_time)] },
+ undo_for => { src => 'IB_tx_purge_undo_for' },
+ used_bufs => { src => $exprs{BufPoolFill}, trans => [qw(percent)]},
+ versions => { src => $exprs{OldVersions} },
+ },
+ visible => [ qw(cxn history_list_len versions undo_for dirty_bufs used_bufs num_txns max_txn lock_structs)],
+ filters => [ ],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => '',
+ colors => [],
+ hide_caption => 1,
+ group_by => [],
+ aggregate => 0,
+ },
+ var_status => {
+ capt => 'Variables & Status',
+ cust => {},
+ cols => {}, # Generated from current varset
+ visible => [], # Generated from current varset
+ filters => [],
+ sort_cols => '',
+ sort_dir => 1,
+ innodb => '',
+ temp => 1, # Do not persist to config file.
+ hide_caption => 1,
+ pivot => 0,
+ group_by => [],
+ aggregate => 0,
+ },
+ wait_array => {
+ capt => 'InnoDB Wait Array',
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ thread => { src => 'thread' },
+ waited_at_filename => { src => 'waited_at_filename' },
+ waited_at_line => { src => 'waited_at_line' },
+ 'time' => { src => 'waited_secs', trans => [ qw(secs_to_time) ] },
+ request_type => { src => 'request_type' },
+ lock_mem_addr => { src => 'lock_mem_addr' },
+ lock_cfile_name => { src => 'lock_cfile_name' },
+ lock_cline => { src => 'lock_cline' },
+ writer_thread => { src => 'writer_thread' },
+ writer_lock_mode => { src => 'writer_lock_mode' },
+ num_readers => { src => 'num_readers' },
+ lock_var => { src => 'lock_var' },
+ waiters_flag => { src => 'waiters_flag' },
+ last_s_file_name => { src => 'last_s_file_name' },
+ last_s_line => { src => 'last_s_line' },
+ last_x_file_name => { src => 'last_x_file_name' },
+ last_x_line => { src => 'last_x_line' },
+ cell_waiting => { src => 'cell_waiting' },
+ cell_event_set => { src => 'cell_event_set' },
+ },
+ visible => [ qw(cxn thread time waited_at_filename waited_at_line request_type num_readers lock_var waiters_flag cell_waiting cell_event_set)],
+ filters => [],
+ sort_cols => 'cxn -time',
+ sort_dir => '1',
+ innodb => 'sm',
+ group_by => [],
+ aggregate => 0,
+ },
+ health_dashboard => {
+ capt => 'Health Dashboard',
+ hide_caption => 1,
+ cust => {},
+ cols => {
+ cxn => { src => 'cxn' },
+ uptime => { src => 'Uptime', trans => [qw(fuzzy_time)] },
+ qps => { src => 'Questions/Uptime_hires', dec => 1, trans => [qw(shorten)] },
+ spark_qps => { src => 'SPARK_qps' },
+ run => { src => 'User_threads_running' },
+ spark_run => { src => 'SPARK_run' },
+ max_query_time => { src => 'Max_query_time', trans => [qw(fuzzy_time)] },
+ connections => { src => 'Threads_connected' },
+ miss_rate => { src => 'Innodb_buffer_pool_reads/Uptime_hires', trans => [qw(set_precision)] },
+ locked_count => { src => 'Locked_count' },
+ 'open' => { src => 'Open_tables' },
+ slave_running => { src => 'Slave_ok . " " . (Slaves || "")' },
+ time_behind_master => { src => 'seconds_behind_master', hdr => 'ReplLag' , trans => [qw(fuzzy_time)] },
+ longest_sql => { src => 'Longest_sql', trans => [qw(distill)] },
+ },
+ visible => [qw(
+ cxn uptime max_query_time time_behind_master qps connections run
+ miss_rate locked_count open slave_running longest_sql
+ )],
+ filters => [],
+ sort_cols => 'cxn',
+ sort_dir => '1',
+ innodb => '',
+ colors => [
+ { col => 'slave_running', op => '=~', arg => 'No', color => 'black on_red' },
+ { col => 'max_query_time', op => '>', arg => 30 * 60, color => 'red' },
+ { col => 'max_query_time', op => '>', arg => 600, color => 'yellow' },
+ { col => 'time_behind_master', op => '>', arg => 3600, color => 'cyan' },
+ ],
+ group_by => [],
+ aggregate => 0,
+ },
+);
+
+# Initialize %tbl_meta from %columns and do some checks.
+foreach my $table_name ( keys %tbl_meta ) {
+ my $table = $tbl_meta{$table_name};
+ my $cols = $table->{cols};
+
+ foreach my $col_name ( keys %$cols ) {
+ my $col_def = $table->{cols}->{$col_name};
+ die "I can't find a column named '$col_name' for '$table_name'" unless $columns{$col_name};
+ $columns{$col_name}->{referenced} = 1;
+
+ foreach my $prop ( keys %col_props ) {
+ # Each column gets non-existing values set from %columns or defaults from %col_props.
+ if ( !$col_def->{$prop} ) {
+ $col_def->{$prop}
+ = defined($columns{$col_name}->{$prop})
+ ? $columns{$col_name}->{$prop}
+ : $col_props{$prop};
+ }
+ }
+
+ # Ensure transformations and aggregate functions are valid
+ die "Unknown aggregate function '$col_def->{agg}' "
+ . "for column '$col_name' in table '$table_name'"
+ unless exists $agg_funcs{$col_def->{agg}};
+ foreach my $trans ( @{$col_def->{trans}} ) {
+ die "Unknown transformation '$trans' "
+ . "for column '$col_name' in table '$table_name'"
+ unless exists $trans_funcs{$trans};
+ }
+ }
+
+ # Ensure each column in visible and group_by exists in cols
+ foreach my $place ( qw(visible group_by) ) {
+ foreach my $col_name ( @{$table->{$place}} ) {
+ if ( !exists $cols->{$col_name} ) {
+ die "Column '$col_name' is listed in '$place' for '$table_name', but doesn't exist";
+ }
+ }
+ }
+
+ # Compile sort and color subroutines
+ $table->{sort_func} = make_sort_func($table);
+ $table->{color_func} = make_color_func($table);
+}
+
+# This is for code cleanup:
+{
+ my @unused_cols = grep { !$columns{$_}->{referenced} } sort keys %columns;
+ if ( @unused_cols ) {
+ die "The following columns are not used: "
+ . join(' ', @unused_cols);
+ }
+}
+
+# ###########################################################################
+# Operating modes {{{3
+# ###########################################################################
+my %modes = (
+ A => {
+ hdr => 'Dashboard',
+ cust => {},
+ note => 'Shows health/status dashboard',
+ action_for => {
+ k => {
+ action => sub { kill_query('CONNECTION') },
+ label => "Kill a query's connection",
+ },
+ x => {
+ action => sub { kill_query('QUERY') },
+ label => "Kill a query",
+ },
+ r => {
+ action => sub { reverse_sort('health_dashboard'); },
+ label => 'Reverse sort order',
+ },
+ s => {
+ action => sub { choose_sort_cols('health_dashboard'); },
+ label => "Choose sort column",
+ },
+ },
+ display_sub => \&display_A,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(health_dashboard)],
+ visible_tables => [qw(health_dashboard)],
+ },
+ B => {
+ hdr => 'InnoDB Buffers',
+ cust => {},
+ note => 'Shows buffer info from InnoDB',
+ action_for => {
+ i => {
+ action => sub { toggle_config('status_inc') },
+ label => 'Toggle incremental status display',
+ },
+ },
+ display_sub => \&display_B,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(buffer_pool page_statistics insert_buffers adaptive_hash_index)],
+ visible_tables => [qw(buffer_pool page_statistics insert_buffers adaptive_hash_index)],
+ },
+ C => {
+ hdr => 'Command Summary',
+ cust => {},
+ note => 'Shows relative magnitude of variables',
+ action_for => {
+ s => {
+ action => sub { get_config_interactive('cmd_filter') },
+ label => 'Choose variable prefix',
+ },
+ },
+ display_sub => \&display_C,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(cmd_summary)],
+ visible_tables => [qw(cmd_summary)],
+ },
+ D => {
+ hdr => 'InnoDB Deadlocks',
+ cust => {},
+ note => 'View InnoDB deadlock information',
+ action_for => {
+ c => {
+ action => sub { edit_table('deadlock_transactions') },
+ label => 'Choose visible columns',
+ },
+ w => {
+ action => \&create_deadlock,
+ label => 'Wipe deadlock status info by creating a deadlock',
+ },
+ },
+ display_sub => \&display_D,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(deadlock_transactions deadlock_locks)],
+ visible_tables => [qw(deadlock_transactions deadlock_locks)],
+ },
+ F => {
+ hdr => 'InnoDB FK Err',
+ cust => {},
+ note => 'View the latest InnoDB foreign key error',
+ action_for => {},
+ display_sub => \&display_F,
+ connections => [],
+ server_group => '',
+ one_connection => 1,
+ tables => [qw(fk_error)],
+ visible_tables => [qw(fk_error)],
+ },
+ I => {
+ hdr => 'InnoDB I/O Info',
+ cust => {},
+ note => 'Shows I/O info (i/o, log...) from InnoDB',
+ action_for => {
+ i => {
+ action => sub { toggle_config('status_inc') },
+ label => 'Toggle incremental status display',
+ },
+ },
+ display_sub => \&display_I,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(io_threads pending_io file_io_misc log_statistics)],
+ visible_tables => [qw(io_threads pending_io file_io_misc log_statistics)],
+ },
+ K => {
+ hdr => 'InnoDB Lock Waits',
+ cust => {},
+ note => 'Shows blocked and blocking transactions',
+ action_for => {
+ k => {
+ action => sub { kill_query('CONNECTION') },
+ label => "Kill a query's connection",
+ },
+ },
+ display_sub => \&display_K,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(innodb_blocked_blocker)],
+ visible_tables => [qw(innodb_blocked_blocker)],
+ },
+ L => {
+ hdr => 'Locks',
+ cust => {},
+ note => 'Shows transaction locks',
+ action_for => {
+ a => {
+ action => sub { send_cmd_to_servers('CREATE TABLE IF NOT EXISTS test.innodb_lock_monitor(a int) ENGINE=InnoDB', 0, '', []); },
+ label => 'Start the InnoDB Lock Monitor',
+ },
+ o => {
+ action => sub { send_cmd_to_servers('DROP TABLE IF EXISTS test.innodb_lock_monitor', 0, '', []); },
+ label => 'Stop the InnoDB Lock Monitor',
+ },
+ },
+ display_sub => \&display_L,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(innodb_locks)],
+ visible_tables => [qw(innodb_locks)],
+ },
+ M => {
+ hdr => 'Replication Status',
+ cust => {},
+ note => 'Shows replication (master and slave) status',
+ action_for => {
+ a => {
+ action => sub { send_cmd_to_servers('START SLAVE', 0, 'START SLAVE SQL_THREAD UNTIL MASTER_LOG_FILE = ?, MASTER_LOG_POS = ?', []); },
+ label => 'Start slave(s)',
+ },
+ i => {
+ action => sub { toggle_config('status_inc') },
+ label => 'Toggle incremental status display',
+ },
+ o => {
+ action => sub { send_cmd_to_servers('STOP SLAVE', 0, '', []); },
+ label => 'Stop slave(s)',
+ },
+ b => {
+ action => sub { purge_master_logs() },
+ label => 'Purge unused master logs',
+ },
+ },
+ display_sub => \&display_M,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(slave_sql_status slave_io_status master_status)],
+ visible_tables => [qw(slave_sql_status slave_io_status master_status)],
+ },
+ O => {
+ hdr => 'Open Tables',
+ cust => {},
+ note => 'Shows open tables in MySQL',
+ action_for => {
+ r => {
+ action => sub { reverse_sort('open_tables'); },
+ label => 'Reverse sort order',
+ },
+ s => {
+ action => sub { choose_sort_cols('open_tables'); },
+ label => "Choose sort column",
+ },
+ },
+ display_sub => \&display_O,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(open_tables)],
+ visible_tables => [qw(open_tables)],
+ },
+ U => {
+ hdr => 'User Statistics',
+ cust => {},
+ note => 'Displays Percona/MariaDB enhancements such as table statistics',
+ action_for => {
+ i => {
+ action => sub { set_visible_table('index_statistics') },
+ label => 'Switch to INDEX_STATISTICS',
+ },
+ s => {
+ action => sub { $clear_screen_sub->(); send_cmd_to_servers('SET @@global.userstat_running := 1 - @@global.userstat_running', 1, undef, []); },
+ label => "Change the display's sort column",
+ },
+ t => {
+ action => sub { set_visible_table('table_statistics') },
+ label => 'Switch to TABLE_STATISTICS',
+ },
+ x => {
+ action => sub { set_visible_table('index_table_statistics') },
+ label => 'Switch to {INDEX,TABLE}_STATISTICS',
+ },
+ },
+ display_sub => \&display_P,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(table_statistics index_statistics index_table_statistics)],
+ visible_tables => [qw(index_table_statistics)],
+ },
+ Q => {
+ hdr => 'Query List',
+ cust => {},
+ note => 'Shows queries from SHOW FULL PROCESSLIST',
+ action_for => {
+ a => {
+ action => sub { toggle_filter('processlist', 'hide_self') },
+ label => 'Toggle the innotop process',
+ },
+ c => {
+ action => sub { edit_table('processlist') },
+ label => 'Choose visible columns',
+ },
+ e => {
+ action => sub { analyze_query('e'); },
+ label => "Explain a thread's query",
+ },
+ f => {
+ action => sub { analyze_query('f'); },
+ label => "Show a thread's full query",
+ },
+ h => {
+ action => sub { toggle_visible_table('Q', 'q_header') },
+ label => 'Toggle the header on and off',
+ },
+ i => {
+ action => sub { toggle_filter('processlist', 'hide_inactive') },
+ label => 'Toggle idle processes',
+ },
+ k => {
+ action => sub { kill_query('CONNECTION') },
+ label => "Kill a query's connection",
+ },
+ r => {
+ action => sub { reverse_sort('processlist'); },
+ label => 'Reverse sort order',
+ },
+ s => {
+ action => sub { choose_sort_cols('processlist'); },
+ label => "Change the display's sort column",
+ },
+ t => {
+ action => sub { toggle_filter('processlist', 'hide_connect') },
+ label => 'Toggle slave processes',
+ },
+ x => {
+ action => sub { kill_query('QUERY') },
+ label => "Kill a query",
+ },
+ },
+ display_sub => \&display_Q,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(q_header processlist)],
+ visible_tables => [qw(q_header processlist)],
+ },
+ R => {
+ hdr => 'InnoDB Row Ops',
+ cust => {},
+ note => 'Shows InnoDB row operation and semaphore info',
+ action_for => {
+ i => {
+ action => sub { toggle_config('status_inc') },
+ label => 'Toggle incremental status display',
+ },
+ },
+ display_sub => \&display_R,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(row_operations row_operation_misc semaphores wait_array)],
+ visible_tables => [qw(row_operations row_operation_misc semaphores wait_array)],
+ },
+ S => {
+ hdr => 'Variables & Status',
+ cust => {},
+ note => 'Shows query load statistics a la vmstat',
+ action_for => {
+ '>' => {
+ action => sub { switch_var_set('S_set', 1) },
+ label => 'Switch to next variable set',
+ },
+ '<' => {
+ action => sub { switch_var_set('S_set', -1) },
+ label => 'Switch to prev variable set',
+ },
+ c => {
+ action => sub {
+ choose_var_set('S_set');
+ start_S_mode();
+ },
+ label => "Choose which set to display",
+ },
+ e => {
+ action => \&edit_current_var_set,
+ label => 'Edit the current set of variables',
+ },
+ i => {
+ action => sub { $clear_screen_sub->(); toggle_config('status_inc') },
+ label => 'Toggle incremental status display',
+ },
+ '-' => {
+ action => sub { set_display_precision(-1) },
+ label => 'Decrease fractional display precision',
+ },
+ '+' => {
+ action => sub { set_display_precision(1) },
+ label => 'Increase fractional display precision',
+ },
+ g => {
+ action => sub { set_s_mode('g') },
+ label => 'Switch to graph (tload) view',
+ },
+ s => {
+ action => sub { set_s_mode('s') },
+ label => 'Switch to standard (vmstat) view',
+ },
+ v => {
+ action => sub { set_s_mode('v') },
+ label => 'Switch to pivoted view',
+ },
+ },
+ display_sub => \&display_S,
+ no_clear_screen => 1,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(var_status)],
+ visible_tables => [qw(var_status)],
+ },
+ T => {
+ hdr => 'InnoDB Txns',
+ cust => {},
+ note => 'Shows InnoDB transactions in top-like format',
+ action_for => {
+ a => {
+ action => sub { toggle_filter('innodb_transactions', 'hide_self') },
+ label => 'Toggle the innotop process',
+ },
+ c => {
+ action => sub { edit_table('innodb_transactions') },
+ label => 'Choose visible columns',
+ },
+ e => {
+ action => sub { analyze_query('e'); },
+ label => "Explain a thread's query",
+ },
+ f => {
+ action => sub { analyze_query('f'); },
+ label => "Show a thread's full query",
+ },
+ h => {
+ action => sub { toggle_visible_table('T', 't_header') },
+ label => 'Toggle the header on and off',
+ },
+ i => {
+ action => sub { toggle_filter('innodb_transactions', 'hide_inactive') },
+ label => 'Toggle inactive transactions',
+ },
+ k => {
+ action => sub { kill_query('CONNECTION') },
+ label => "Kill a transaction's connection",
+ },
+ r => {
+ action => sub { reverse_sort('innodb_transactions'); },
+ label => 'Reverse sort order',
+ },
+ s => {
+ action => sub { choose_sort_cols('innodb_transactions'); },
+ label => "Change the display's sort column",
+ },
+ x => {
+ action => sub { kill_query('QUERY') },
+ label => "Kill a query",
+ },
+ },
+ display_sub => \&display_T,
+ connections => [],
+ server_group => '',
+ one_connection => 0,
+ tables => [qw(t_header innodb_transactions)],
+ visible_tables => [qw(t_header innodb_transactions)],
+ },
+);
+
+# ###########################################################################
+# Global key mappings {{{3
+# Keyed on a single character, which is read from the keyboard. Uppercase
+# letters switch modes. Lowercase letters access commands when in a mode.
+# These can be overridden by action_for in %modes.
+# ###########################################################################
+my %action_for = (
+ '$' => {
+ action => \&edit_configuration,
+ label => 'Edit configuration settings',
+ },
+ '?' => {
+ action => \&display_help,
+ label => 'Show help',
+ },
+ '!' => {
+ action => \&display_license,
+ label => 'Show license and warranty',
+ },
+ '^' => {
+ action => \&edit_table,
+ label => "Edit the displayed table(s)",
+ },
+ '#' => {
+ action => \&choose_server_groups,
+ label => 'Select/create server groups',
+ },
+ '@' => {
+ action => \&choose_servers,
+ label => 'Select/create server connections',
+ },
+ '/' => {
+ action => \&add_quick_filter,
+ label => 'Quickly filter what you see',
+ },
+ '\\' => {
+ action => \&clear_quick_filters,
+ label => 'Clear quick-filters',
+ },
+ '%' => {
+ action => \&choose_filters,
+ label => 'Choose and edit table filters',
+ },
+ "\t" => {
+ action => \&next_server_group,
+ label => 'Switch to the next server group',
+ key => 'TAB',
+ },
+ '=' => {
+ action => \&toggle_aggregate,
+ label => 'Toggle aggregation',
+ },
+ # TODO: can these be auto-generated from %modes?
+ A => {
+ action => sub { switch_mode('A') },
+ label => '',
+ },
+ B => {
+ action => sub { switch_mode('B') },
+ label => '',
+ },
+ C => {
+ action => sub { switch_mode('C') },
+ label => '',
+ },
+ D => {
+ action => sub { switch_mode('D') },
+ label => '',
+ },
+ F => {
+ action => sub { switch_mode('F') },
+ label => '',
+ },
+ I => {
+ action => sub { switch_mode('I') },
+ label => '',
+ },
+ K => {
+ action => sub { switch_mode('K') },
+ label => '',
+ },
+ L => {
+ action => sub { switch_mode('L') },
+ label => '',
+ },
+ M => {
+ action => sub { switch_mode('M') },
+ label => '',
+ },
+ O => {
+ action => sub { switch_mode('O') },
+ label => '',
+ },
+ Q => {
+ action => sub { switch_mode('Q') },
+ label => '',
+ },
+ R => {
+ action => sub { switch_mode('R') },
+ label => '',
+ },
+ S => {
+ action => \&start_S_mode,
+ label => '',
+ },
+ T => {
+ action => sub { switch_mode('T') },
+ label => '',
+ },
+ U => {
+ action => sub { switch_mode('U') },
+ label => '',
+ },
+ d => {
+ action => sub { get_config_interactive('interval') },
+ label => 'Change refresh interval',
+ },
+ n => { action => \&next_server, label => 'Switch to the next connection' },
+ p => { action => \&pause, label => 'Pause innotop', },
+ q => { action => \&finish, label => 'Quit innotop', },
+);
+
+# ###########################################################################
+# Sleep times after certain statements {{{3
+# ###########################################################################
+my %stmt_sleep_time_for = ();
+
+# ###########################################################################
+# Config editor key mappings {{{3
+# ###########################################################################
+my %cfg_editor_action = (
+ c => {
+ note => 'Edit columns, etc in the displayed table(s)',
+ func => \&edit_table,
+ },
+ g => {
+ note => 'Edit general configuration',
+ func => \&edit_configuration_variables,
+ },
+ k => {
+ note => 'Edit row-coloring rules',
+ func => \&edit_color_rules,
+ },
+ p => {
+ note => 'Manage plugins',
+ func => \&edit_plugins,
+ },
+ s => {
+ note => 'Edit server groups',
+ func => \&edit_server_groups,
+ },
+ S => {
+ note => 'Edit SQL statement sleep delays',
+ func => \&edit_stmt_sleep_times,
+ },
+ t => {
+ note => 'Choose which table(s) to display in this mode',
+ func => \&choose_mode_tables,
+ },
+);
+
+# ###########################################################################
+# Color editor key mappings {{{3
+# ###########################################################################
+my %color_editor_action = (
+ n => {
+ note => 'Create a new color rule',
+ func => sub {
+ my ( $tbl, $idx ) = @_;
+ my $meta = $tbl_meta{$tbl};
+
+ $clear_screen_sub->();
+ my $col;
+ do {
+ $col = prompt_list(
+ 'Choose the target column for the rule',
+ '',
+ sub { return keys %{$meta->{cols}} },
+ { map { $_ => $meta->{cols}->{$_}->{label} } keys %{$meta->{cols}} });
+ } while ( !$col );
+ ( $col ) = grep { $_ } split(/\W+/, $col);
+ return $idx unless $col && exists $meta->{cols}->{$col};
+
+ $clear_screen_sub->();
+ my $op;
+ do {
+ $op = prompt_list(
+ 'Choose the comparison operator for the rule',
+ '',
+ sub { return keys %comp_ops },
+ { map { $_ => $comp_ops{$_} } keys %comp_ops } );
+ } until ( $op );
+ $op =~ s/\s+//g;
+ return $idx unless $op && exists $comp_ops{$op};
+
+ my $arg;
+ do {
+ $arg = prompt('Specify an argument for the comparison');
+ } until defined $arg;
+
+ my $color;
+ do {
+ $color = prompt_list(
+ 'Choose the color(s) the row should be when the rule matches',
+ '',
+ sub { return keys %ansicolors },
+ { map { $_ => $_ } keys %ansicolors } );
+ } until defined $color;
+ $color = join(' ', unique(grep { exists $ansicolors{$_} } split(/\W+/, $color)));
+ return $idx unless $color;
+
+ push @{$tbl_meta{$tbl}->{colors}}, {
+ col => $col,
+ op => $op,
+ arg => $arg,
+ color => $color
+ };
+ $tbl_meta{$tbl}->{cust}->{colors} = 1;
+
+ return $idx;
+ },
+ },
+ d => {
+ note => 'Remove the selected rule',
+ func => sub {
+ my ( $tbl, $idx ) = @_;
+ my @rules = @{ $tbl_meta{$tbl}->{colors} };
+ return 0 unless @rules > 0 && $idx < @rules && $idx >= 0;
+ splice(@{$tbl_meta{$tbl}->{colors}}, $idx, 1);
+ $tbl_meta{$tbl}->{cust}->{colors} = 1;
+ return $idx == @rules ? $#rules : $idx;
+ },
+ },
+ j => {
+ note => 'Move highlight down one',
+ func => sub {
+ my ( $tbl, $idx ) = @_;
+ my $num_rules = scalar @{$tbl_meta{$tbl}->{colors}};
+ return ($idx + 1) % $num_rules;
+ },
+ },
+ k => {
+ note => 'Move highlight up one',
+ func => sub {
+ my ( $tbl, $idx ) = @_;
+ my $num_rules = scalar @{$tbl_meta{$tbl}->{colors}};
+ return ($idx - 1) % $num_rules;
+ },
+ },
+ '+' => {
+ note => 'Move selected rule up one',
+ func => sub {
+ my ( $tbl, $idx ) = @_;
+ my $meta = $tbl_meta{$tbl};
+ my $dest = $idx == 0 ? scalar(@{$meta->{colors}} - 1) : $idx - 1;
+ my $temp = $meta->{colors}->[$idx];
+ $meta->{colors}->[$idx] = $meta->{colors}->[$dest];
+ $meta->{colors}->[$dest] = $temp;
+ $meta->{cust}->{colors} = 1;
+ return $dest;
+ },
+ },
+ '-' => {
+ note => 'Move selected rule down one',
+ func => sub {
+ my ( $tbl, $idx ) = @_;
+ my $meta = $tbl_meta{$tbl};
+ my $dest = $idx == scalar(@{$meta->{colors}} - 1) ? 0 : $idx + 1;
+ my $temp = $meta->{colors}->[$idx];
+ $meta->{colors}->[$idx] = $meta->{colors}->[$dest];
+ $meta->{colors}->[$dest] = $temp;
+ $meta->{cust}->{colors} = 1;
+ return $dest;
+ },
+ },
+);
+
+# ###########################################################################
+# Plugin editor key mappings {{{3
+# ###########################################################################
+my %plugin_editor_action = (
+ '*' => {
+ note => 'Toggle selected plugin active/inactive',
+ func => sub {
+ my ( $plugins, $idx ) = @_;
+ my $plugin = $plugins->[$idx];
+ $plugin->{active} = $plugin->{active} ? 0 : 1;
+ return $idx;
+ },
+ },
+ j => {
+ note => 'Move highlight down one',
+ func => sub {
+ my ( $plugins, $idx ) = @_;
+ return ($idx + 1) % scalar(@$plugins);
+ },
+ },
+ k => {
+ note => 'Move highlight up one',
+ func => sub {
+ my ( $plugins, $idx ) = @_;
+ return $idx == 0 ? @$plugins - 1 : $idx - 1;
+ },
+ },
+);
+
+# ###########################################################################
+# Table editor key mappings {{{3
+# ###########################################################################
+my %tbl_editor_action = (
+ a => {
+ note => 'Add a column to the table',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+ my @visible_cols = @{ $tbl_meta{$tbl}->{visible} };
+ my %all_cols = %{ $tbl_meta{$tbl}->{cols} };
+ delete @all_cols{@visible_cols};
+ my $choice = prompt_list(
+ 'Choose a column',
+ '',
+ sub { return keys %all_cols; },
+ { map { $_ => $all_cols{$_}->{label} || $all_cols{$_}->{hdr} } keys %all_cols });
+ if ( $all_cols{$choice} ) {
+ push @{$tbl_meta{$tbl}->{visible}}, $choice;
+ $tbl_meta{$tbl}->{cust}->{visible} = 1;
+ return $choice;
+ }
+ return $col;
+ },
+ },
+ n => {
+ note => 'Create a new column and add it to the table',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+
+ $clear_screen_sub->();
+ print word_wrap("Choose a name for the column. This name is not displayed, and is used only "
+ . "for internal reference. It can contain only lowercase letters, numbers, "
+ . "and underscores.");
+ print "\n\n";
+ do {
+ $col = prompt("Enter column name");
+ $col = '' if $col =~ m/[^a-z0-9_]/;
+ } while ( !$col );
+
+ $clear_screen_sub->();
+ my $hdr;
+ do {
+ $hdr = prompt("Enter column header");
+ } while ( !$hdr );
+
+ $clear_screen_sub->();
+ print "Choose a source for the column's data\n\n";
+ my ( $src, $sub, $err );
+ do {
+ if ( $err ) {
+ print "Error: $err\n\n";
+ }
+ $src = prompt("Enter column source");
+ if ( $src ) {
+ ( $sub, $err ) = compile_expr($src);
+ }
+ } until ( !$err);
+
+ # TODO: this duplicates %col_props.
+ $tbl_meta{$tbl}->{cols}->{$col} = {
+ hdr => $hdr,
+ src => $src,
+ just => '-',
+ num => 0,
+ label => 'User-defined',
+ user => 1,
+ tbl => $tbl,
+ minw => 0,
+ maxw => 0,
+ trans => [],
+ func => $sub,
+ dec => 0,
+ agg => 0,
+ aggonly => 0,
+ agghide => 0,
+ };
+
+ $tbl_meta{$tbl}->{visible} = [ unique(@{$tbl_meta{$tbl}->{visible}}, $col) ];
+ $tbl_meta{$tbl}->{cust}->{visible} = 1;
+ return $col;
+ },
+ },
+ d => {
+ note => 'Remove selected column',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+ my @visible_cols = @{ $tbl_meta{$tbl}->{visible} };
+ my $idx = 0;
+ return $col unless @visible_cols > 1;
+ while ( $visible_cols[$idx] ne $col ) {
+ $idx++;
+ }
+ $tbl_meta{$tbl}->{visible} = [ grep { $_ ne $col } @visible_cols ];
+ $tbl_meta{$tbl}->{cust}->{visible} = 1;
+ return $idx == $#visible_cols ? $visible_cols[$idx - 1] : $visible_cols[$idx + 1];
+ },
+ },
+ e => {
+ note => 'Edit selected column',
+ func => sub {
+ # TODO: make this editor hotkey-driven and give readline support.
+ my ( $tbl, $col ) = @_;
+ $clear_screen_sub->();
+ my $meta = $tbl_meta{$tbl}->{cols}->{$col};
+ my @prop = qw(hdr label src just num minw maxw trans agg); # TODO redundant
+
+ my $answer;
+ do {
+ # Do what the user asked...
+ if ( $answer && grep { $_ eq $answer } @prop ) {
+ # Some properties are arrays, others scalars.
+ my $ini = ref $col_props{$answer} ? join(' ', @{$meta->{$answer}}) : $meta->{$answer};
+ my $val = prompt("New value for $answer", undef, $ini);
+ $val = [ split(' ', $val) ] if ref($col_props{$answer});
+ if ( $answer eq 'trans' ) {
+ $val = [ unique(grep{ exists $trans_funcs{$_} } @$val) ];
+ }
+ @{$meta}{$answer, 'user', 'tbl' } = ( $val, 1, $tbl );
+ }
+
+ my @display_lines = (
+ '',
+ "You are editing column $tbl.$col.\n",
+ );
+
+ push @display_lines, create_table2(
+ \@prop,
+ { map { $_ => $_ } @prop },
+ { map { $_ => ref $meta->{$_} eq 'ARRAY' ? join(' ', @{$meta->{$_}})
+ : ref $meta->{$_} ? '[expression code]'
+ : $meta->{$_}
+ } @prop
+ },
+ { sep => ' ' });
+ draw_screen(\@display_lines, { raw => 1 });
+ print "\n\n"; # One to add space, one to clear readline artifacts
+ $answer = prompt('Edit what? (q to quit)');
+ } while ( $answer ne 'q' );
+
+ return $col;
+ },
+ },
+ j => {
+ note => 'Move highlight down one',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+ my @visible_cols = @{ $tbl_meta{$tbl}->{visible} };
+ my $idx = 0;
+ while ( $visible_cols[$idx] ne $col ) {
+ $idx++;
+ }
+ return $visible_cols[ ($idx + 1) % @visible_cols ];
+ },
+ },
+ k => {
+ note => 'Move highlight up one',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+ my @visible_cols = @{ $tbl_meta{$tbl}->{visible} };
+ my $idx = 0;
+ while ( $visible_cols[$idx] ne $col ) {
+ $idx++;
+ }
+ return $visible_cols[ $idx - 1 ];
+ },
+ },
+ '+' => {
+ note => 'Move selected column up one',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+ my $meta = $tbl_meta{$tbl};
+ my @visible_cols = @{$meta->{visible}};
+ my $idx = 0;
+ while ( $visible_cols[$idx] ne $col ) {
+ $idx++;
+ }
+ if ( $idx ) {
+ $visible_cols[$idx] = $visible_cols[$idx - 1];
+ $visible_cols[$idx - 1] = $col;
+ $meta->{visible} = \@visible_cols;
+ }
+ else {
+ shift @{$meta->{visible}};
+ push @{$meta->{visible}}, $col;
+ }
+ $meta->{cust}->{visible} = 1;
+ return $col;
+ },
+ },
+ '-' => {
+ note => 'Move selected column down one',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+ my $meta = $tbl_meta{$tbl};
+ my @visible_cols = @{$meta->{visible}};
+ my $idx = 0;
+ while ( $visible_cols[$idx] ne $col ) {
+ $idx++;
+ }
+ if ( $idx == $#visible_cols ) {
+ unshift @{$meta->{visible}}, $col;
+ pop @{$meta->{visible}};
+ }
+ else {
+ $visible_cols[$idx] = $visible_cols[$idx + 1];
+ $visible_cols[$idx + 1] = $col;
+ $meta->{visible} = \@visible_cols;
+ }
+ $meta->{cust}->{visible} = 1;
+ return $col;
+ },
+ },
+ f => {
+ note => 'Choose filters',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+ choose_filters($tbl);
+ return $col;
+ },
+ },
+ o => {
+ note => 'Edit color rules',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+ edit_color_rules($tbl);
+ return $col;
+ },
+ },
+ s => {
+ note => 'Choose sort columns',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+ choose_sort_cols($tbl);
+ return $col;
+ },
+ },
+ g => {
+ note => 'Choose group-by (aggregate) columns',
+ func => sub {
+ my ( $tbl, $col ) = @_;
+ choose_group_cols($tbl);
+ return $col;
+ },
+ },
+);
+
+# ###########################################################################
+# Global variables and environment {{{2
+# ###########################################################################
+
+my @this_term_size; # w_chars, h_chars, w_pix, h_pix
+my @last_term_size; # w_chars, h_chars, w_pix, h_pix
+my $char;
+my $windows = $OSNAME =~ m/MSWin/;
+my $have_color = 0;
+my $MAX_ULONG = 4294967295; # 2^32-1
+my $num_regex = qr/^[+-]?(?=\d|\.)\d*(?:\.\d+)?(?:E[+-]?\d+|)$/i;
+my $int_regex = qr/^\d+$/;
+my $bool_regex = qr/^[01]$/;
+my $term = undef;
+my $file = undef; # File to watch for InnoDB monitor output
+my $file_mtime = undef; # Status of watched file
+my $file_data = undef; # Last chunk of text read from file
+my $innodb_parser = InnoDBParser->new;
+
+my $nonfatal_errs = join('|',
+ 'Access denied for user',
+ 'Unknown MariaDB server host',
+ 'Unknown database',
+ 'Can\'t connect to local MariaDB server through socket',
+ 'Can\'t connect to MariaDB server on',
+ 'MySQL server has gone away',
+ 'Cannot call SHOW INNODB STATUS',
+ 'Access denied',
+ 'AutoCommit',
+ 'Lost connection to MariaDB server',
+ 'Lost connection to server',
+ 'Too many connections',
+);
+
+if ( !$opts{n} ) {
+ require Term::ReadLine;
+ $term = Term::ReadLine->new('innotop');
+}
+
+# Stores status, variables, innodb status, master/slave status etc.
+# Keyed on connection name. Each entry is a hashref of current and past data sets,
+# keyed on clock tick.
+my %vars;
+my %info_gotten = (); # Which things have been retrieved for the current clock tick.
+my %show_variables; # Stores SHOW VARIABLES for each cxn so we don't re-fetch.
+
+# Stores info on currently displayed queries: cxn, connection ID, query text,
+# user, and host.
+my @current_queries;
+
+my $lines_printed = 0;
+my $clock = 0; # Incremented with every wake-sleep cycle
+my $clearing_deadlocks = 0;
+
+# If terminal coloring is available, use it. The only function I want from
+# the module is the colored() function.
+eval {
+ if ( !$opts{n} ) {
+ if ( $windows ) {
+ require Win32::Console::ANSI;
+ }
+ require Term::ANSIColor;
+ import Term::ANSIColor qw(colored);
+ $have_color = 1;
+ }
+};
+if ( $EVAL_ERROR || $opts{n} ) {
+ # If there was an error, manufacture my own colored() function that does no
+ # coloring.
+ *colored = sub { pop @_; @_; };
+}
+
+if ( $opts{n} ) {
+ $clear_screen_sub = sub {};
+}
+elsif ( $windows ) {
+ $clear_screen_sub = sub { $lines_printed = 0; system("cls") };
+}
+else {
+ my $clear = `clear`;
+ $clear_screen_sub = sub { $lines_printed = 0; print $clear };
+}
+
+# ###########################################################################
+# Config storage. {{{2
+# ###########################################################################
+my %config = (
+ color => {
+ val => $have_color,
+ note => 'Whether to use terminal coloring',
+ conf => 'ALL',
+ pat => $bool_regex,
+ },
+ cmd_filter => {
+ val => 'Com_',
+ note => 'Prefix for values in C mode',
+ conf => [qw(C)],
+ },
+ plugin_dir => {
+ val => "$homepath/.innotop/plugins",
+ note => 'Directory where plugins can be found',
+ conf => 'ALL',
+ },
+ show_percent => {
+ val => 1,
+ note => 'Show the % symbol after percentages',
+ conf => 'ALL',
+ pat => $bool_regex,
+ },
+ skip_innodb => {
+ val => 0,
+ note => 'Disable SHOW INNODB STATUS',
+ conf => 'ALL',
+ pat => $bool_regex,
+ },
+ S_func => {
+ val => 's',
+ note => 'What to display in S mode: graph, status, pivoted status',
+ conf => [qw(S)],
+ pat => qr/^[gsv]$/,
+ },
+ cxn_timeout => {
+ val => 28800,
+ note => 'Connection timeout for keeping unused connections alive',
+ conf => 'ALL',
+ pat => $int_regex,
+ },
+ graph_char => {
+ val => '*',
+ note => 'Character for drawing graphs',
+ conf => [ qw(S) ],
+ pat => qr/^.$/,
+ },
+ show_cxn_errors_in_tbl => {
+ val => 1,
+ note => 'Whether to display connection errors as rows in the table',
+ conf => 'ALL',
+ pat => $bool_regex,
+ },
+ hide_hdr => {
+ val => 0,
+ note => 'Whether to show column headers',
+ conf => 'ALL',
+ pat => $bool_regex,
+ },
+ show_cxn_errors => {
+ val => 1,
+ note => 'Whether to print connection errors to STDOUT',
+ conf => 'ALL',
+ pat => $bool_regex,
+ },
+ readonly => {
+ val => 1,
+ note => 'Whether the config file is read-only',
+ conf => [ qw() ],
+ pat => $bool_regex,
+ },
+ global => {
+ val => 1,
+ note => 'Whether to show GLOBAL variables and status',
+ conf => 'ALL',
+ pat => $bool_regex,
+ },
+ header_highlight => {
+ val => 'bold',
+ note => 'How to highlight table column headers',
+ conf => 'ALL',
+ pat => qr/^(?:bold|underline)$/,
+ },
+ display_table_captions => {
+ val => 1,
+ note => 'Whether to put captions on tables',
+ conf => 'ALL',
+ pat => $bool_regex,
+ },
+ charset => {
+ val => 'ascii',
+ note => 'What type of characters should be displayed in queries (ascii, unicode, none)',
+ conf => 'ALL',
+ pat => qr/^(?:ascii|unicode|none)$/,
+ },
+ auto_wipe_dl => {
+ val => 0,
+ note => 'Whether to auto-wipe InnoDB deadlocks',
+ conf => 'ALL',
+ pat => $bool_regex,
+ },
+ max_height => {
+ val => 30,
+ note => '[Win32] Max window height',
+ conf => 'ALL',
+ },
+ debug => {
+ val => 0,
+ pat => $bool_regex,
+ note => 'Debug mode (more verbose errors, uses more memory)',
+ conf => 'ALL',
+ },
+ num_digits => {
+ val => 2,
+ pat => $int_regex,
+ note => 'How many digits to show in fractional numbers and percents',
+ conf => 'ALL',
+ },
+ debugfile => {
+ val => "$homepath/.innotop/core_dump",
+ note => 'A debug file in case you are interested in error output',
+ },
+ show_statusbar => {
+ val => 1,
+ pat => $bool_regex,
+ note => 'Whether to show the status bar in the display',
+ conf => 'ALL',
+ },
+ mode => {
+ val => "A",
+ note => "Which mode to start in",
+ cmdline => 1,
+ },
+ status_inc => {
+ val => 0,
+ note => 'Whether to show raw or incremental values for status variables',
+ pat => $bool_regex,
+ },
+ interval => {
+ val => 10,
+ pat => qr/^(?:(?:\d*?[1-9]\d*(?:\.\d*)?)|(?:\d*\.\d*?[1-9]\d*))$/,
+ note => "The interval at which the display will be refreshed. Fractional values allowed.",
+ },
+ num_status_sets => {
+ val => 9,
+ pat => $int_regex,
+ note => 'How many sets of STATUS and VARIABLES values to show',
+ conf => [ qw(S) ],
+ },
+ S_set => {
+ val => 'general',
+ pat => qr/^\w+$/,
+ note => 'Which set of variables to display in S (Variables & Status) mode',
+ conf => [ qw(S) ],
+ },
+ timeformat => {
+ val => '%Y-%m-%dT%H:%M:%S',
+ pat => qr//,
+ note => 'The strftime() timestamp format to write in -n mode',
+ },
+ spark => {
+ val => 10,
+ note => 'How long to make status variable sparklines',
+ conf => 'ALL',
+ pat => $int_regex,
+ },
+);
+
+# ###########################################################################
+# Config file sections {{{2
+# The configuration file is broken up into sections like a .ini file. This
+# variable defines those sections and the subroutines responsible for reading
+# and writing them.
+# ###########################################################################
+my %config_file_sections = (
+ plugins => {
+ reader => \&load_config_plugins,
+ writer => \&save_config_plugins,
+ },
+ group_by => {
+ reader => \&load_config_group_by,
+ writer => \&save_config_group_by,
+ },
+ filters => {
+ reader => \&load_config_filters,
+ writer => \&save_config_filters,
+ },
+ active_filters => {
+ reader => \&load_config_active_filters,
+ writer => \&save_config_active_filters,
+ },
+ visible_tables => {
+ reader => \&load_config_visible_tables,
+ writer => \&save_config_visible_tables,
+ },
+ sort_cols => {
+ reader => \&load_config_sort_cols,
+ writer => \&save_config_sort_cols,
+ },
+ active_columns => {
+ reader => \&load_config_active_columns,
+ writer => \&save_config_active_columns,
+ },
+ tbl_meta => {
+ reader => \&load_config_tbl_meta,
+ writer => \&save_config_tbl_meta,
+ },
+ general => {
+ reader => \&load_config_config,
+ writer => \&save_config_config,
+ },
+ connections => {
+ reader => \&load_config_connections,
+ writer => \&save_config_connections,
+ },
+ active_connections => {
+ reader => \&load_config_active_connections,
+ writer => \&save_config_active_connections,
+ },
+ server_groups => {
+ reader => \&load_config_server_groups,
+ writer => \&save_config_server_groups,
+ },
+ active_server_groups => {
+ reader => \&load_config_active_server_groups,
+ writer => \&save_config_active_server_groups,
+ },
+ max_values_seen => {
+ reader => \&load_config_mvs,
+ writer => \&save_config_mvs,
+ },
+ varsets => {
+ reader => \&load_config_varsets,
+ writer => \&save_config_varsets,
+ },
+ colors => {
+ reader => \&load_config_colors,
+ writer => \&save_config_colors,
+ },
+ stmt_sleep_times => {
+ reader => \&load_config_stmt_sleep_times,
+ writer => \&save_config_stmt_sleep_times,
+ },
+);
+
+# Config file sections have some dependencies, so they have to be read/written in order.
+my @ordered_config_file_sections = qw(general plugins filters active_filters tbl_meta
+ connections active_connections server_groups active_server_groups max_values_seen
+ active_columns sort_cols visible_tables varsets colors stmt_sleep_times
+ group_by);
+
+# All events for which plugins may register themselves. Entries are arrayrefs.
+my %event_listener_for = map { $_ => [] }
+ qw(
+ extract_values
+ set_to_tbl_pre_filter set_to_tbl_pre_sort set_to_tbl_pre_group
+ set_to_tbl_pre_colorize set_to_tbl_pre_transform set_to_tbl_pre_pivot
+ set_to_tbl_pre_create set_to_tbl_post_create
+ draw_screen
+ );
+
+# All variables to which plugins have access.
+my %pluggable_vars = (
+ action_for => \%action_for,
+ agg_funcs => \%agg_funcs,
+ config => \%config,
+ connections => \%connections,
+ dbhs => \%dbhs,
+ filters => \%filters,
+ modes => \%modes,
+ server_groups => \%server_groups,
+ tbl_meta => \%tbl_meta,
+ trans_funcs => \%trans_funcs,
+ var_sets => \%var_sets,
+);
+
+# ###########################################################################
+# Contains logic to generate prepared statements for a given function for a
+# given DB connection. Returns a $sth.
+# ###########################################################################
+my %stmt_maker_for = (
+ INDEX_STATISTICS => sub {
+ my ( $dbh ) = @_;
+ # Detect whether there's a Percona Server with INFORMATION_SCHEMA.INDEX_STATISTICS
+ # and if not, just select nothing.
+ my $sth;
+ eval { # This can fail if the table doesn't exist, INFORMATION_SCHEMA doesn't exist, etc.
+ my $cols = $dbh->selectall_arrayref(q{SHOW /*innotop*/ COLUMNS FROM INFORMATION_SCHEMA.INDEX_STATISTICS});
+ if ( @$cols ) {
+ $sth = $dbh->prepare(q{SELECT /*innotop*/ * FROM INFORMATION_SCHEMA.INDEX_STATISTICS});
+ }
+ };
+ $sth ||= $dbh->prepare(q{SELECT /*innotop*/ '' FROM DUAL WHERE 1 = 0});
+ return $sth;
+ },
+ INDEX_TABLE_STATISTICS => sub {
+ my ( $dbh ) = @_;
+ # Detect whether there's a Percona Server with INFORMATION_SCHEMA.INDEX_STATISTICS
+ # and if not, just select nothing.
+ my $sth;
+ eval { # This can fail if the table doesn't exist, INFORMATION_SCHEMA doesn't exist, etc.
+ my $cols = $dbh->selectall_arrayref(q{SHOW /*innotop*/ COLUMNS FROM INFORMATION_SCHEMA.INDEX_STATISTICS});
+ if ( @$cols ) {
+ $sth = $dbh->prepare(q{SELECT /*innotop*/ L.TABLE_SCHEMA, L.TABLE_NAME, }
+ . q{SUM(L.ROWS_READ) AS ROWS_READ, SUM(R.ROWS_READ) AS ROWS_READ_FROM_INDEXES, }
+ . q{SUM(L.ROWS_CHANGED) AS ROWS_CHANGED, }
+ . q{SUM(L.ROWS_CHANGED_X_INDEXES) AS ROWS_CHANGED_X_INDEXES }
+ . q{FROM INFORMATION_SCHEMA.TABLE_STATISTICS AS L LEFT JOIN INFORMATION_SCHEMA.INDEX_STATISTICS AS R }
+ . q{USING(TABLE_SCHEMA, TABLE_NAME) GROUP BY L.TABLE_SCHEMA, L.TABLE_NAME});
+ }
+ };
+ $sth ||= $dbh->prepare(q{SELECT /*innotop*/ '' FROM DUAL WHERE 1 = 0});
+ return $sth;
+ },
+ INNODB_BLOCKED_BLOCKER => sub {
+ my ( $dbh ) = @_;
+ # Detect whether the server supports the I_S tables and if not, just select nothing.
+ my $sth;
+ eval { # This can fail if the table doesn't exist, INFORMATION_SCHEMA doesn't exist, etc.
+ my $cols = $dbh->selectall_arrayref(q{SHOW /*innotop*/ COLUMNS FROM INFORMATION_SCHEMA.INNODB_LOCK_WAITS});
+ if ( @$cols ) {
+ if ($dbh->{mariadb_serverinfo} =~ /^5.1/) {
+ $sth = $dbh->prepare(q{
+ SELECT /*innotop*/
+ r.trx_mysql_thread_id AS waiting_thread,
+ r.trx_query AS waiting_query,
+ "n/a" AS waiting_rows_modified,
+ TIMESTAMPDIFF(SECOND, r.trx_started, NOW()) AS waiting_age,
+ TIMESTAMPDIFF(SECOND, r.trx_wait_started, NOW()) AS waiting_wait_secs,
+ rp.user AS waiting_user,
+ rp.host AS waiting_host,
+ rp.db AS waiting_db,
+ b.trx_mysql_thread_id AS blocking_thread,
+ b.trx_query AS blocking_query,
+ "n/a" AS blocking_rows_modified,
+ TIMESTAMPDIFF(SECOND, b.trx_started, NOW()) AS blocking_age,
+ TIMESTAMPDIFF(SECOND, b.trx_wait_started, NOW()) AS blocking_wait_secs,
+ bp.user AS blocking_user,
+ bp.host AS blocking_host,
+ bp.db AS blocking_db,
+ CONCAT(bp.command, IF(bp.command = 'Sleep', CONCAT(' ', bp.time), '')) AS blocking_status,
+ CONCAT(lock_mode, ' ', lock_type, ' ', lock_table, '(', lock_index, ')') AS lock_info
+ FROM INFORMATION_SCHEMA.INNODB_LOCK_WAITS w
+ JOIN INFORMATION_SCHEMA.INNODB_TRX b ON b.trx_id = w.blocking_trx_id
+ JOIN INFORMATION_SCHEMA.INNODB_TRX r ON r.trx_id = w.requesting_trx_id
+ JOIN INFORMATION_SCHEMA.INNODB_LOCKS l ON l.lock_id = w.requested_lock_id
+ LEFT JOIN INFORMATION_SCHEMA.PROCESSLIST bp ON bp.id = b.trx_mysql_thread_id
+ LEFT JOIN INFORMATION_SCHEMA.PROCESSLIST rp ON rp.id = r.trx_mysql_thread_id
+ });
+ } else {
+ $sth = $dbh->prepare(q{
+ SELECT /*innotop*/
+ r.trx_mysql_thread_id AS waiting_thread,
+ r.trx_query AS waiting_query,
+ r.trx_rows_modified AS waiting_rows_modified,
+ TIMESTAMPDIFF(SECOND, r.trx_started, NOW()) AS waiting_age,
+ TIMESTAMPDIFF(SECOND, r.trx_wait_started, NOW()) AS waiting_wait_secs,
+ rp.user AS waiting_user,
+ rp.host AS waiting_host,
+ rp.db AS waiting_db,
+ b.trx_mysql_thread_id AS blocking_thread,
+ b.trx_query AS blocking_query,
+ b.trx_rows_modified AS blocking_rows_modified,
+ TIMESTAMPDIFF(SECOND, b.trx_started, NOW()) AS blocking_age,
+ TIMESTAMPDIFF(SECOND, b.trx_wait_started, NOW()) AS blocking_wait_secs,
+ bp.user AS blocking_user,
+ bp.host AS blocking_host,
+ bp.db AS blocking_db,
+ CONCAT(bp.command, IF(bp.command = 'Sleep', CONCAT(' ', bp.time), '')) AS blocking_status,
+ CONCAT(lock_mode, ' ', lock_type, ' ', lock_table, '(', lock_index, ')') AS lock_info
+ FROM INFORMATION_SCHEMA.INNODB_LOCK_WAITS w
+ JOIN INFORMATION_SCHEMA.INNODB_TRX b ON b.trx_id = w.blocking_trx_id
+ JOIN INFORMATION_SCHEMA.INNODB_TRX r ON r.trx_id = w.requesting_trx_id
+ JOIN INFORMATION_SCHEMA.INNODB_LOCKS l ON l.lock_id = w.requested_lock_id
+ LEFT JOIN INFORMATION_SCHEMA.PROCESSLIST bp ON bp.id = b.trx_mysql_thread_id
+ LEFT JOIN INFORMATION_SCHEMA.PROCESSLIST rp ON rp.id = r.trx_mysql_thread_id
+ });
+ }
+ }
+ };
+ $sth ||= $dbh->prepare(q{SELECT /*innotop*/ '' FROM DUAL WHERE 1 = 0});
+ return $sth;
+ },
+ INNODB_STATUS => sub {
+ my ( $dbh ) = @_;
+ return $dbh->prepare(version_ge( $dbh, '5.0.0' )
+ ? 'SHOW /*innotop*/ ENGINE INNODB STATUS'
+ : 'SHOW /*innotop*/ INNODB STATUS');
+ },
+ SHOW_VARIABLES => sub {
+ my ( $dbh ) = @_;
+ return $dbh->prepare($config{global}->{val} && version_ge( $dbh, '4.0.3' )
+ ? 'SHOW /*innotop*/ GLOBAL VARIABLES'
+ : 'SHOW /*innotop*/ VARIABLES');
+ },
+ SHOW_STATUS => sub {
+ my ( $dbh ) = @_;
+ return $dbh->prepare($config{global}->{val} && version_ge( $dbh, '5.0.2' )
+ ? 'SHOW /*innotop*/ GLOBAL STATUS'
+ : 'SHOW /*innotop*/ STATUS');
+ },
+ KILL_QUERY => sub {
+ my ( $dbh ) = @_;
+ return $dbh->prepare(version_ge( $dbh, '5.0.0' )
+ ? 'KILL /*innotop*/ QUERY ?'
+ : 'KILL /*innotop*/ ?');
+ },
+ SHOW_MASTER_LOGS => sub {
+ my ( $dbh ) = @_;
+ return $dbh->prepare('SHOW /*innotop*/ MASTER LOGS');
+ },
+ SHOW_MASTER_STATUS => sub {
+ my ( $dbh ) = @_;
+ return $dbh->prepare('SHOW /*innotop*/ MASTER STATUS');
+ },
+ SHOW_SLAVE_STATUS => sub {
+ my ( $dbh ) = @_;
+ return $dbh->prepare('SHOW /*innotop*/ SLAVE STATUS');
+ },
+ GET_CHANNELS => sub {
+ my ( $dbh ) = @_;
+ return $dbh->prepare(version_ge( $dbh, '5.7.0' )
+ ? 'select CHANNEL_NAME from performance_schema.replication_applier_status where CHANNEL_NAME regexp "^[a-zA-Z].*";'
+ : 'select "no_channels"');
+ },
+ KILL_CONNECTION => sub {
+ my ( $dbh ) = @_;
+ return $dbh->prepare(version_ge( $dbh, '5.0.0' )
+ ? 'KILL /*innotop*/ CONNECTION ?'
+ : 'KILL /*innotop*/ ?');
+ },
+ OPEN_TABLES => sub {
+ my ( $dbh ) = @_;
+ return version_ge($dbh, '4.0.0')
+ ? $dbh->prepare('SHOW /*innotop*/ OPEN TABLES')
+ : undef;
+ },
+ PROCESSLIST => sub {
+ my ( $dbh ) = @_;
+ # In newer versions of the server, use INFORMATION_SCHEMA table if it exists,
+ # and use the TIME_MS column (in Percona Server) if that exists.
+ my $sth;
+ eval { # This can fail if the table doesn't exist, INFORMATION_SCHEMA doesn't exist, etc.
+ my $cols = $dbh->selectall_arrayref(q{SHOW /*innotop*/ COLUMNS FROM INFORMATION_SCHEMA.PROCESSLIST LIKE 'TIME_MS'});
+ if ( @$cols ) { # The TIME_MS column exists
+ $sth = $dbh->prepare(q{SELECT /*innotop*/ ID, USER, HOST, DB, COMMAND, CASE WHEN TIME_MS/1000 > 365*86400 THEN TIME ELSE TIME_MS/1000 END AS TIME, STATE, INFO FROM INFORMATION_SCHEMA.PROCESSLIST});
+ }
+ };
+ $sth ||= $dbh->prepare('SHOW /*innotop*/ FULL PROCESSLIST');
+ return $sth;
+ },
+ PROCESSLIST_NO_IS => sub {
+ my ( $dbh ) = @_;
+ # We do not use INFORMATION_SCHEMA table because it doesn't show slave
+ # SQL statements. http://bugs.mysql.com/66401
+ my $sth = $dbh->prepare('SHOW /*innotop*/ FULL PROCESSLIST');
+ return $sth;
+ },
+ TABLE_STATISTICS => sub {
+ my ( $dbh ) = @_;
+ # Detect whether there's a Percona Server with INFORMATION_SCHEMA.TABLE_STATISTICS
+ # and if not, just select nothing.
+ my $sth;
+ eval { # This can fail if the table doesn't exist, INFORMATION_SCHEMA doesn't exist, etc.
+ my $cols = $dbh->selectall_arrayref(q{SHOW /*innotop*/ COLUMNS FROM INFORMATION_SCHEMA.TABLE_STATISTICS});
+ if ( @$cols ) {
+ $sth = $dbh->prepare(q{SELECT /*innotop*/ * FROM INFORMATION_SCHEMA.TABLE_STATISTICS});
+ }
+ };
+ $sth ||= $dbh->prepare(q{SELECT /*innotop*/ '' FROM DUAL WHERE 1 = 0});
+ return $sth;
+ },
+);
+
+# Plugins!
+my %plugins = (
+);
+
+# ###########################################################################
+# Run the program {{{1
+# ###########################################################################
+sub main {
+ # This config variable is only useful for MS Windows because its terminal
+ # can't tell how tall it is.
+ if ( !$windows ) {
+ delete $config{max_height};
+ }
+
+ # Try to lower my priority.
+ eval { setpriority(0, 0, getpriority(0, 0) + 10); };
+
+ # Print stuff to the screen immediately, don't wait for a newline.
+ $OUTPUT_AUTOFLUSH = 1;
+
+ # Clear the screen and load the configuration.
+ $clear_screen_sub->();
+ load_config();
+
+ # Override config variables with command-line options
+ my %cmdline =
+ map { $_->{c} => $opts{$_->{k}} }
+ grep { exists $_->{c} && exists $opts{$_->{k}} }
+ @opt_spec;
+
+ foreach my $name (keys %cmdline) {
+ next if not defined $cmdline{$name};
+ my $val = $cmdline{$name};
+ if ( exists($config{$name}) and (!$config{$name}->{pat} or $val =~ m/$config{$name}->{pat}/ )) {
+ $config{$name}->{val} = $val;
+ }
+ }
+
+ post_process_tbl_meta();
+
+ # Make sure no changes are written to config file in non-interactive mode.
+ if ( $opts{n} ) {
+ $config{readonly}->{val} = 1;
+ }
+
+ eval {
+
+ # Open the file for InnoDB status
+ if ( @ARGV ) {
+ my $filename = shift @ARGV;
+ open $file, "<", $filename
+ or die "Cannot open '$filename': $OS_ERROR";
+ }
+
+ # In certain modes we might have to collect data for two cycles
+ # before printing anything out, so we need to bump up the count one.
+ if ( $opts{n} && $opts{count} && $config{status_inc}->{val}
+ && $config{mode}->{val} =~ m/[S]/ )
+ {
+ $opts{count}++;
+ }
+
+ while (++$clock) {
+
+ my $mode = $config{mode}->{val} || 'Q';
+ if ( !$modes{$mode} ) {
+ die "Mode '$mode' doesn't exist; try one of these:\n"
+ . join("\n", map { " $_ $modes{$_}->{hdr}" } sort keys %modes)
+ . "\n";
+ }
+
+ if ( !$opts{n} ) {
+ @last_term_size = @this_term_size;
+ @this_term_size = Term::ReadKey::GetTerminalSize(\*STDOUT);
+ if ( $windows ) {
+ $this_term_size[0]--;
+ $this_term_size[1]
+ = min($this_term_size[1], $config{max_height}->{val});
+ }
+ die("Can't read terminal size") unless @this_term_size;
+ }
+
+ # If there's no connection to a database server, we need to fix that...
+ if ( !%connections ) {
+ print "You have not defined any database connections.\n\n";
+ add_new_dsn();
+ }
+
+ # See whether there are any connections defined for this mode. If there's only one
+ # connection total, assume the user wants to just use innotop for a single server
+ # and don't ask which server to connect to. Also, if we're monitoring from a file,
+ # we just use the first connection.
+ if ( !get_connections() ) {
+ if ( $file || 1 == scalar keys %connections ) {
+ $modes{$config{mode}->{val}}->{connections} = [ keys %connections ];
+ }
+ else {
+ choose_connections();
+ }
+ }
+
+ # Term::ReadLine might have re-set $OUTPUT_AUTOFLUSH.
+ $OUTPUT_AUTOFLUSH = 1;
+
+ # Prune old data
+ my $sets = $config{num_status_sets}->{val};
+ foreach my $store ( values %vars ) {
+ delete @{$store}{ grep { $_ < $clock - $sets } keys %$store };
+ }
+ %info_gotten = ();
+
+ # Call the subroutine to display this mode.
+ $modes{$mode}->{display_sub}->();
+
+ # It may be time to quit now.
+ if ( $opts{count} && $clock >= $opts{count} ) {
+ finish();
+ }
+
+ # RECON: Try to reconnect failed connections, while the user sees no lag.
+ foreach my $cxn ( grep { $dbhs{$_}->{failed} } keys %dbhs ) {
+ eval { connect_to_db($cxn); }; # Ignore errors entirely here.
+ }
+
+ # Wait for a bit.
+ if ( $opts{n} ) {
+ sleep($config{interval}->{val});
+ }
+ else {
+ ReadMode('cbreak');
+ $char = ReadKey($config{interval}->{val});
+ ReadMode('normal');
+ }
+
+ # Handle whatever action the key indicates.
+ do_key_action();
+
+ }
+ };
+ if ( $EVAL_ERROR ) {
+ core_dump( $EVAL_ERROR );
+ }
+ finish();
+}
+main() unless caller(); # make me testable!
+
+# Subroutines {{{1
+# Mode functions{{{2
+# switch_mode {{{3
+sub switch_mode {
+ my $mode = shift;
+ $config{mode}->{val} = $mode;
+}
+
+# Prompting functions {{{2
+# prompt_list {{{3
+# Prompts the user for a value, given a question, initial value,
+# a completion function and a hashref of hints.
+sub prompt_list {
+ die "Can't call in non-interactive mode" if $opts{n};
+ my ( $question, $init, $completion, $hints ) = @_;
+ if ( $hints ) {
+ # Figure out how wide the table will be
+ my $max_name = max(map { length($_) } keys %$hints );
+ $max_name ||= 0;
+ $max_name += 3;
+ my @meta_rows = create_table2(
+ [ sort keys %$hints ],
+ { map { $_ => $_ } keys %$hints },
+ { map { $_ => trunc($hints->{$_}, $this_term_size[0] - $max_name) } keys %$hints },
+ { sep => ' ' });
+ if (@meta_rows > 10) {
+ # Try to split and stack the meta rows next to each other
+ my $split = int(@meta_rows / 2);
+ @meta_rows = stack_next(
+ [@meta_rows[0..$split - 1]],
+ [@meta_rows[$split..$#meta_rows]],
+ { pad => ' | '},
+ );
+ }
+ print join( "\n",
+ '',
+ map { ref $_ ? colored(@$_) : $_ } create_caption('Choose from', @meta_rows), ''),
+ "\n";
+ }
+ $term->Attribs->{completion_function} = $completion;
+ my $answer = $term->readline("$question: ", $init);
+ $OUTPUT_AUTOFLUSH = 1;
+ $answer = '' if !defined($answer);
+ $answer =~ s/\s+$//;
+ return $answer;
+}
+
+# prompt {{{3
+# Prints out a prompt and reads from the keyboard, then validates with the
+# validation regex until the input is correct.
+sub prompt {
+ die "Can't call in non-interactive mode" if $opts{n};
+ my ( $prompt, $regex, $init, $completion ) = @_;
+ my $response;
+ my $success = 0;
+ do {
+ if ( $completion ) {
+ $term->Attribs->{completion_function} = $completion;
+ }
+ $response = $term->readline("$prompt: ", $init);
+ if ( $regex && $response !~ m/$regex/ ) {
+ print "Invalid response.\n\n";
+ }
+ else {
+ $success = 1;
+ }
+ } while ( !$success );
+ $OUTPUT_AUTOFLUSH = 1;
+ $response =~ s/\s+$//;
+ return $response;
+}
+
+# prompt_noecho {{{3
+# Unfortunately, suppressing echo with Term::ReadLine isn't reliable; the user might not
+# have that library, or it might not support that feature.
+sub prompt_noecho {
+ my ( $prompt ) = @_;
+ print colored("$prompt: ", 'underline');
+ my $response;
+ ReadMode('noecho');
+ $response = <STDIN>;
+ chomp($response);
+ ReadMode('normal');
+ return $response;
+}
+
+# noecho_password {{{3
+# read password for command line parameters with noecho
+sub noecho_password {
+ my $prompt = shift @_;
+ local $OUTPUT_AUTOFLUSH = 1;
+ my $response;
+ eval {
+ if ( $windows ) {
+ require Win32::Console::ANSI;
+ }
+ require Term::ANSIColor;
+ import Term::ANSIColor qw(colored);
+ $response = prompt_noecho($prompt);
+ print "\n" or die
+ "Cannot print: $OS_ERROR";
+ };
+
+ if ( $EVAL_ERROR ) {
+ die "Cannot read response; is Term::ReadKey installed? $EVAL_ERROR";
+ }
+ return $response;
+}
+
+# do_key_action {{{3
+# Depending on whether a key was read, do something. Keys have certain
+# actions defined in lookup tables. Each mode may have its own lookup table,
+# which trumps the global table -- so keys can be context-sensitive. The key
+# may be read and written in a subroutine, so it's a global.
+sub do_key_action {
+ if ( defined $char ) {
+ my $mode = $config{mode}->{val};
+ my $action
+ = defined($modes{$mode}->{action_for}->{$char}) ? $modes{$mode}->{action_for}->{$char}->{action}
+ : defined($action_for{$char}) ? $action_for{$char}->{action}
+ : sub{};
+ $action->();
+ }
+}
+
+# pause {{{3
+sub pause {
+ die "Can't call in non-interactive mode" if $opts{n};
+ my $msg = shift;
+ print defined($msg) ? "\n$msg" : "\nPress any key to continue";
+ ReadMode('cbreak');
+ my $char = ReadKey(0);
+ ReadMode('normal');
+ return $char;
+}
+
+# reverse_sort {{{3
+sub reverse_sort {
+ my $tbl = shift;
+ $tbl_meta{$tbl}->{sort_dir} *= -1;
+}
+
+# select_cxn {{{3
+# Selects connection(s). If the mode (or argument list) has only one, returns
+# it without prompt.
+sub select_cxn {
+ my ( $prompt, @cxns ) = @_;
+ if ( !@cxns ) {
+ @cxns = get_connections();
+ }
+ if ( @cxns == 1 ) {
+ return $cxns[0];
+ }
+ my $choices = prompt_list(
+ $prompt,
+ $cxns[0],
+ sub{ return @cxns },
+ { map { $_ => $connections{$_}->{dsn} } @cxns });
+ my @result = unique(grep { my $a = $_; grep { $_ eq $a } @cxns } split(/\s+/, $choices));
+ return @result;
+}
+
+# kill_query {{{3
+# Kills a connection, or on new versions, optionally a query but not connection.
+sub kill_query {
+ my ( $q_or_c ) = @_;
+
+ my $info = choose_thread(
+ sub { 1 },
+ 'Select a thread to kill the ' . $q_or_c,
+ );
+ return unless $info;
+ my $distill = distill($info->{query} || '');
+ $distill = " running '$distill'" if $distill;
+ return unless pause("Kill $info->{id} ("
+ . ($info->{user} || '')
+ . '@'
+ . ($info->{host} || '')
+ . ")$distill ? ") =~ m/y/i;
+
+ eval {
+ do_stmt($info->{cxn}, $q_or_c eq 'QUERY' ? 'KILL_QUERY' : 'KILL_CONNECTION', $info->{id} );
+ };
+
+ if ( $EVAL_ERROR ) {
+ print "\nError: $EVAL_ERROR";
+ pause();
+ }
+}
+
+# set_display_precision {{{3
+sub set_display_precision {
+ my $dir = shift;
+ $config{num_digits}->{val} = min(9, max(0, $config{num_digits}->{val} + $dir));
+}
+
+sub toggle_visible_table {
+ my ( $mode, $table ) = @_;
+ my $visible = $modes{$mode}->{visible_tables};
+ if ( grep { $_ eq $table } @$visible ) {
+ $modes{$mode}->{visible_tables} = [ grep { $_ ne $table } @$visible ];
+ }
+ else {
+ unshift @$visible, $table;
+ }
+ $modes{$mode}->{cust}->{visible_tables} = 1;
+}
+
+# toggle_filter{{{3
+sub toggle_filter {
+ my ( $tbl, $filter ) = @_;
+ my $filters = $tbl_meta{$tbl}->{filters};
+ if ( grep { $_ eq $filter } @$filters ) {
+ $tbl_meta{$tbl}->{filters} = [ grep { $_ ne $filter } @$filters ];
+ }
+ else {
+ push @$filters, $filter;
+ }
+ $tbl_meta{$tbl}->{cust}->{filters} = 1;
+}
+
+# toggle_config {{{3
+sub toggle_config {
+ my ( $key ) = @_;
+ $config{$key}->{val} ^= 1;
+}
+
+# create_deadlock {{{3
+sub create_deadlock {
+ $clear_screen_sub->();
+
+ print "This function will deliberately cause a small deadlock, "
+ . "clearing deadlock information from the InnoDB monitor.\n\n";
+
+ my $answer = prompt("Are you sure you want to proceed? Say 'y' if you do");
+ return 0 unless $answer eq 'y';
+
+ my ( $cxn ) = select_cxn('Clear on which server? ');
+ return unless $cxn && exists($connections{$cxn});
+
+ clear_deadlock($cxn);
+}
+
+# deadlock_thread {{{3
+sub deadlock_thread {
+ my ( $id, $tbl, $cxn ) = @_;
+
+ eval {
+ my $dbh = get_new_db_connection($cxn, 1);
+
+ # disable binary logging for this session
+ $dbh->do("set SQL_LOG_BIN=0");
+
+ my @stmts = (
+ "set transaction isolation level serializable",
+ (version_ge($dbh, '4.0.11') ? "start transaction" : 'begin'),
+ "select * from $tbl where a = $id",
+ "update $tbl set a = $id where a <> $id",
+ );
+
+ foreach my $stmt (@stmts[0..2]) {
+ $dbh->do($stmt);
+ }
+ sleep(1 + $id);
+ $dbh->do($stmts[-1]);
+ };
+ if ( $EVAL_ERROR ) {
+ if ( $EVAL_ERROR !~ m/Deadlock found/ ) {
+ die $EVAL_ERROR;
+ }
+ }
+ exit(0);
+}
+
+# Purges unused binlogs on the master, up to but not including the latest log.
+# TODO: guess which connections are slaves of a given master.
+sub purge_master_logs {
+ my @cxns = get_connections();
+
+ get_master_slave_status(@cxns);
+
+ # Toss out the rows that don't have master/slave status...
+ my @vars =
+ grep { $_ && ($_->{file} || $_->{master_host}) }
+ map { $vars{$_}->{$clock} } @cxns;
+ @cxns = map { $_->{cxn} } @vars;
+
- # Add SHOW VARIABLES to the hash. If we've gotten this info before, skip and re-use.
++ # Figure out which master to purge owns.
+ my @masters = map { $_->{cxn} } grep { $_->{file} } @vars;
+ my ( $master ) = select_cxn('Which master?', @masters );
+ return unless $master;
+ my ($master_status) = grep { $_->{cxn} eq $master } @vars;
+
+ # Figure out the result order (not lexical order) of master logs.
+ my @master_logs = get_master_logs($master);
+ my $i = 0;
+ my %master_logs = map { $_->{log_name} => $i++ } @master_logs;
+
+ # Ask which slave(s) are reading from this master.
+ my @slave_status = grep { $_->{master_host} } @vars;
+ my @slaves = map { $_->{cxn} } @slave_status;
+ @slaves = select_cxn("Which slaves are reading from $master?", @slaves);
+ @slave_status = grep { my $item = $_; grep { $item->{cxn} eq $_ } @slaves } @slave_status;
+ return unless @slave_status;
+
+ # Find the minimum binary log in use.
+ my $min_log = min(map { $master_logs{$_->{master_log_file}} } @slave_status);
+ my $log_name = $master_logs[$min_log]->{log_name};
+
+ my $stmt = "PURGE MASTER LOGS TO '$log_name'";
+ send_cmd_to_servers($stmt, 0, 'PURGE {MASTER | BINARY} LOGS {TO "log_name" | BEFORE "date"}', [$master]);
+}
+
+sub send_cmd_to_servers {
+ my ( $cmd, $all, $hint, $cxns ) = @_;
+ if ( $all ) {
+ @$cxns = get_connections();
+ }
+ elsif ( !@$cxns ) {
+ @$cxns = select_cxn('Which servers?', @$cxns);
+ }
+ if ( $hint ) {
+ print "\nHint: $hint\n";
+ }
+ $cmd = prompt('Command to send', undef, $cmd);
+ foreach my $cxn ( @$cxns ) {
+ eval {
+ my $sth = do_query($cxn, $cmd);
+ };
+ if ( $EVAL_ERROR ) {
+ print "Error from $cxn: $EVAL_ERROR\n";
+ }
+ else {
+ print "Success on $cxn\n";
+ }
+ }
+ pause();
+}
+
+# Display functions {{{2
+
+sub set_s_mode {
+ my ( $func ) = @_;
+ $clear_screen_sub->();
+ $config{S_func}->{val} = $func;
+}
+
+# start_S_mode {{{3
+sub start_S_mode {
+ $clear_screen_sub->();
+ switch_mode('S');
+}
+
+# display_A {{{3
+sub display_A {
+ my @display_lines;
+ my @cxns = get_connections();
+ get_processlist_stats(@cxns);
+ get_status_info(@cxns);
+ get_master_slave_status(@cxns);
+ my @visible = get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+ my @health_dashboard;
+ my %rows_for = (
+ health_dashboard => \@health_dashboard,
+ );
+
+ foreach my $cxn ( @cxns ) {
+ # Get the status variables
+ my $set = $vars{$cxn}->{$clock};
+ my $pre = $vars{$cxn}->{$clock-1} || $set;
+ my $hash = extract_values($set, $set, $pre, 'health_dashboard');
+ # Make QPS and Miss show now, not overall.
+ if ( exists $vars{$cxn}->{$clock - 1} ) {
+ my $inc = inc(0, $cxn);
+ my $hash2 = extract_values($inc, $set, $pre, 'health_dashboard');
+ map { $hash->{$_} = $hash2->{$_} } qw(qps miss_rate);
+ }
+ push @health_dashboard, $hash;
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ draw_screen(\@display_lines);
+}
+
+# display_B {{{3
+sub display_B {
+ my @display_lines;
+ my @cxns = get_connections();
+ get_status_info(@cxns);
+ get_innodb_status(\@cxns);
+
+ my @buffer_pool;
+ my @page_statistics;
+ my @insert_buffers;
+ my @adaptive_hash_index;
+ my %rows_for = (
+ buffer_pool => \@buffer_pool,
+ page_statistics => \@page_statistics,
+ insert_buffers => \@insert_buffers,
+ adaptive_hash_index => \@adaptive_hash_index,
+ );
+
+ my @visible = get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+
+ foreach my $cxn ( @cxns ) {
+ my $set = $vars{$cxn}->{$clock};
+ my $pre = $vars{$cxn}->{$clock-1} || $set;
+
+ if ( $set->{IB_bp_complete} ) {
+ if ( $wanted{buffer_pool} ) {
+ push @buffer_pool, extract_values($set, $set, $pre, 'buffer_pool');
+ }
+ if ( $wanted{page_statistics} ) {
+ push @page_statistics, extract_values($set, $set, $pre, 'page_statistics');
+ }
+ }
+ if ( $set->{IB_ib_complete} ) {
+ if ( $wanted{insert_buffers} ) {
+ push @insert_buffers, extract_values(
+ $config{status_inc}->{val} ? inc(0, $cxn) : $set, $set, $pre,
+ 'insert_buffers');
+ }
+ if ( $wanted{adaptive_hash_index} ) {
+ push @adaptive_hash_index, extract_values($set, $set, $pre, 'adaptive_hash_index');
+ }
+ }
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ draw_screen(\@display_lines);
+}
+
+# display_C {{{3
+sub display_C {
+ my @display_lines;
+ my @cxns = get_connections();
+ get_status_info(@cxns);
+
+ my @cmd_summary;
+ my %rows_for = (
+ cmd_summary => \@cmd_summary,
+ );
+
+ my @visible = get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+
+ # For now, I'm manually pulling these variables out and pivoting. Eventually a SQL-ish
+ # dialect should let me join a table to a grouped and pivoted table and do this more easily.
+ # TODO: make it so.
+ my $prefix = qr/^$config{cmd_filter}->{val}/; # TODO: this is a total hack
+ my @values;
+ my ($total, $last_total) = (0, 0);
+ foreach my $cxn ( @cxns ) {
+ my $set = $vars{$cxn}->{$clock};
+ my $pre = $vars{$cxn}->{$clock-1} || $set;
+ foreach my $key ( keys %$set ) {
+ next unless $key =~ m/$prefix/i;
+ my $val = $set->{$key};
+ next unless defined $val && $val =~ m/^\d+$/;
+ my $last_val = $val - ($pre->{$key} || 0);
+ $total += $val;
+ $last_total += $last_val;
+ push @values, {
+ name => $key,
+ value => $val,
+ last_value => $last_val,
+ };
+ }
+ }
+
+ # Add aggregation and turn into a real set TODO: total hack
+ if ( $wanted{cmd_summary} ) {
+ foreach my $value ( @values ) {
+ @{$value}{qw(total last_total)} = ($total, $last_total);
+ push @cmd_summary, extract_values($value, $value, $value, 'cmd_summary');
+ }
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ draw_screen(\@display_lines);
+}
+
+# display_D {{{3
+sub display_D {
+ my @display_lines;
+ my @cxns = get_connections();
+ get_status_info(@cxns);
+ get_innodb_status(\@cxns);
+
+ my @deadlock_transactions;
+ my @deadlock_locks;
+ my %rows_for = (
+ deadlock_transactions => \@deadlock_transactions,
+ deadlock_locks => \@deadlock_locks,
+ );
+
+ my @visible = get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+
+ foreach my $cxn ( @cxns ) {
+ my $innodb_status = $vars{$cxn}->{$clock};
+ my $prev_status = $vars{$cxn}->{$clock-1} || $innodb_status;
+
+ if ( $innodb_status->{IB_dl_timestring} ) {
+
+ my $victim = $innodb_status->{IB_dl_rolled_back} || 0;
+
+ if ( %wanted ) {
+ foreach my $txn_id ( keys %{$innodb_status->{IB_dl_txns}} ) {
+ my $txn = $innodb_status->{IB_dl_txns}->{$txn_id};
+ my $pre = $prev_status->{IB_dl_txns}->{$txn_id} || $txn;
+
+ if ( $wanted{deadlock_transactions} ) {
+ my $hash = extract_values($txn->{tx}, $txn->{tx}, $pre->{tx}, 'deadlock_transactions');
+ $hash->{cxn} = $cxn;
+ $hash->{dl_txn_num} = $txn_id;
+ $hash->{victim} = $txn_id == $victim ? 'Yes' : 'No';
+ $hash->{timestring} = $innodb_status->{IB_dl_timestring};
+ $hash->{truncates} = $innodb_status->{IB_dl_complete} ? 'No' : 'Yes';
+ push @deadlock_transactions, $hash;
+ }
+
+ if ( $wanted{deadlock_locks} ) {
+ foreach my $lock ( @{$txn->{locks}} ) {
+ my $hash = extract_values($lock, $lock, $lock, 'deadlock_locks');
+ $hash->{dl_txn_num} = $txn_id;
+ $hash->{cxn} = $cxn;
+ $hash->{mysql_thread_id} = $txn->{tx}->{mysql_thread_id};
+ push @deadlock_locks, $hash;
+ }
+ }
+
+ }
+ }
+ }
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ draw_screen(\@display_lines);
+}
+
+# display_F {{{3
+sub display_F {
+ my @display_lines;
+ my ( $cxn ) = get_connections();
+ get_status_info($cxn);
+ get_innodb_status([$cxn]);
+ my $innodb_status = $vars{$cxn}->{$clock};
+
+ if ( $innodb_status->{IB_fk_timestring} ) {
+
+ push @display_lines, 'Reason: ' . ($innodb_status->{IB_fk_reason} || 'unknown');
+
+ # Display FK errors caused by invalid DML.
+ if ( $innodb_status->{IB_fk_txn} ) {
+ my $txn = $innodb_status->{IB_fk_txn};
+ push @display_lines,
+ '',
+ "User $txn->{user} from $txn->{hostname}, thread $txn->{mysql_thread_id} was executing:",
+ '', no_ctrl_char($txn->{query_text});
+ }
+
+ my @fk_table = create_table2(
+ $tbl_meta{fk_error}->{visible},
+ meta_to_hdr('fk_error'),
+ extract_values($innodb_status, $innodb_status, $innodb_status, 'fk_error'),
+ { just => '-', sep => ' '});
+ push @display_lines, '', @fk_table;
+
+ }
+ else {
+ push @display_lines, '', 'No foreign key error data.';
+ }
+ draw_screen(\@display_lines, { raw => 1 } );
+}
+
+# display_I {{{3
+sub display_I {
+ my @display_lines;
+ my @cxns = get_connections();
+ get_status_info(@cxns);
+ get_innodb_status(\@cxns);
+
+ my @io_threads;
+ my @pending_io;
+ my @file_io_misc;
+ my @log_statistics;
+ my %rows_for = (
+ io_threads => \@io_threads,
+ pending_io => \@pending_io,
+ file_io_misc => \@file_io_misc,
+ log_statistics => \@log_statistics,
+ );
+
+ my @visible = get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+
+ foreach my $cxn ( @cxns ) {
+ my $set = $vars{$cxn}->{$clock};
+ my $pre = $vars{$cxn}->{$clock-1} || $set;
+
+ if ( $set->{IB_io_complete} ) {
+ if ( $wanted{io_threads} ) {
+ my $cur_threads = $set->{IB_io_threads};
+ my $pre_threads = $pre->{IB_io_threads} || $cur_threads;
+ foreach my $key ( sort keys %$cur_threads ) {
+ my $cur_thd = $cur_threads->{$key};
+ my $pre_thd = $pre_threads->{$key} || $cur_thd;
+ my $hash = extract_values($cur_thd, $cur_thd, $pre_thd, 'io_threads');
+ $hash->{cxn} = $cxn;
+ push @io_threads, $hash;
+ }
+ }
+ if ( $wanted{pending_io} ) {
+ push @pending_io, extract_values($set, $set, $pre, 'pending_io');
+ }
+ if ( $wanted{file_io_misc} ) {
+ push @file_io_misc, extract_values(
+ $config{status_inc}->{val} ? inc(0, $cxn) : $set,
+ $set, $pre, 'file_io_misc');
+ }
+ }
+ if ( $set->{IB_lg_complete} && $wanted{log_statistics} ) {
+ push @log_statistics, extract_values($set, $set, $pre, 'log_statistics');
+ }
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ draw_screen(\@display_lines);
+}
+
+# display_K {{{3
+sub display_K {
+ my @display_lines;
+ my @cxns = get_connections();
+
+ my %rows_for = (
+ innodb_blocked_blocker => [],
+ );
+
+ my @visible = get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+
+ # Get info on locks
+ if ( $wanted{innodb_blocked_blocker} ) {
+ my @rows = get_innodb_blocked_blocker(@cxns);
+ push @{$rows_for{innodb_blocked_blocker}}, map { extract_values($_, $_, $_, 'innodb_blocked_blocker') } @rows;
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ # Save queries in global variable for analysis. The rows in %rows_for have been
+ # filtered, etc as a side effect of set_to_tbl(), so they are the same as the rows
+ # that get pushed to the screen.
+ @current_queries = map {
+ my %hash;
+ @hash{ qw(cxn id user host db query time) }
+ = @{$_}{ qw(cxn blocking_thread blocking_user blocking_host blocking_db blocking_query blocking_age) };
+ # time is in fuzzy-time format; convert into something ascii-sortable.
+ $hash{time} = sprintf('%012s', fuzzy_to_secs($hash{time}));
+ $hash{host} =~ s/:.*$// if $hash{host};
+ \%hash;
+ } @{$rows_for{innodb_blocked_blocker}};
+
+ draw_screen(\@display_lines);
+}
+
+# display_L {{{3
+sub display_L {
+ my @display_lines;
+ my @cxns = get_connections();
+ get_status_info(@cxns);
+ get_innodb_status(\@cxns);
+
+ my @innodb_locks;
+ my %rows_for = (
+ innodb_locks => \@innodb_locks,
+ );
+
+ my @visible = get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+
+ # Get info on locks
+ foreach my $cxn ( @cxns ) {
+ my $set = $vars{$cxn}->{$clock} or next;
+ my $pre = $vars{$cxn}->{$clock-1} || $set;
+
+ if ( $wanted{innodb_locks} && defined $set->{IB_tx_transactions} && @{$set->{IB_tx_transactions}} ) {
+
+ my $cur_txns = $set->{IB_tx_transactions};
+ my $pre_txns = $pre->{IB_tx_transactions} || $cur_txns;
+ my %cur_txns = map { $_->{mysql_thread_id} => $_ } grep { defined $_->{mysql_thread_id} } @$cur_txns;
+ my %pre_txns = map { $_->{mysql_thread_id} => $_ } grep { defined $_->{mysql_thread_id} } @$pre_txns;
+ foreach my $txn ( @$cur_txns ) {
+ foreach my $lock ( @{$txn->{locks}} ) {
+ my %hash = map { $_ => $txn->{$_} } qw(txn_id mysql_thread_id lock_wait_time active_secs);
+ map { $hash{$_} = $lock->{$_} } qw(lock_type space_id page_no n_bits index db table txn_id lock_mode special insert_intention waiting);
+ $hash{cxn} = $cxn;
+ push @innodb_locks, extract_values(\%hash, \%hash, \%hash, 'innodb_locks');
+ }
+ }
+ }
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ draw_screen(\@display_lines);
+}
+
+# display_M {{{3
+sub display_M {
+ my @display_lines;
+ my @cxns = get_connections();
+ get_master_slave_status(@cxns);
+ get_status_info(@cxns);
+
+ my @slave_sql_status;
+ my @slave_io_status;
+ my @master_status;
+ my %rows_for = (
+ slave_sql_status => \@slave_sql_status,
+ slave_io_status => \@slave_io_status,
+ master_status => \@master_status,
+ );
+
+ my @visible = get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+
+ foreach my $cxn ( @cxns ) {
+ my $linecount=0;
+ my $sth = do_stmt($cxn, 'GET_CHANNELS');
+ my ( $channel );
+ $sth->execute();
+ $sth->bind_columns( \$channel );
+ while ( $sth->fetch() ) {
+ $linecount=$linecount+1;
+ if ( length $channel < 1 ) {
+ $channel = 'no_channels';
+ }
+ my $chcxn = $channel . '=' . $cxn;
+ get_slave_status($cxn,$channel);
+ my $set = $config{status_inc}->{val} ? inc(0, $chcxn) : $vars{$chcxn}->{$clock};
+ my $pre = $vars{$chcxn}->{$clock - 1} || $set;
+ if ( $wanted{slave_sql_status} ) {
+ push @slave_sql_status, extract_values($set, $set, $pre, 'slave_sql_status');
+ }
+ if ( $wanted{slave_io_status} ) {
+ push @slave_io_status, extract_values($set, $set, $pre, 'slave_io_status');
+ }
+ }
+ if ( $linecount < 1 ) {
+ $channel = 'no_channels';
+ my $chcxn = $channel . '=' . $cxn;
+ get_slave_status($cxn,$channel);
+ my $set = $config{status_inc}->{val} ? inc(0, $chcxn) : $vars{$chcxn}->{$clock};
+ my $pre = $vars{$chcxn}->{$clock - 1} || $set;
+ if ( $wanted{slave_sql_status} ) {
+ push @slave_sql_status, extract_values($set, $set, $pre, 'slave_sql_status');
+ }
+ if ( $wanted{slave_io_status} ) {
+ push @slave_io_status, extract_values($set, $set, $pre, 'slave_io_status');
+ }
+ }
+ my $set = $config{status_inc}->{val} ? inc(0, $cxn) : $vars{$cxn}->{$clock};
+ my $pre = $vars{$cxn}->{$clock - 1} || $set;
+ if ( $wanted{master_status} ) {
+ push @master_status, extract_values($set, $set, $pre, 'master_status');
+ }
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ draw_screen(\@display_lines);
+}
+
+# display_O {{{3
+sub display_O {
+ my @display_lines = ('');
+ my @cxns = get_connections();
+ my @open_tables = get_open_tables(@cxns);
+ my @tables = map { extract_values($_, $_, $_, 'open_tables') } @open_tables;
+ push @display_lines, set_to_tbl(\@tables, 'open_tables'), get_cxn_errors(@cxns);
+ draw_screen(\@display_lines);
+}
+
+# display_P {{{3
+sub display_P {
+ my @display_lines;
+
+ my @table_statistics;
+ my @index_statistics;
+ my @index_table_statistics;
+ my %rows_for = (
+ table_statistics => \@table_statistics,
+ index_statistics => \@index_statistics,
+ index_table_statistics => \@index_table_statistics,
+ );
+
+ my @visible = $opts{n} ? 'index_table_statistics' : get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+
+ # Get the data
+ my @cxns = get_connections();
+
+ if ( $wanted{table_statistics} ) {
+ my @rows = get_table_statistics(@cxns);
+ push @table_statistics, map { extract_values($_, $_, $_, 'table_statistics') } @rows;
+ }
+ elsif ( $wanted{index_statistics} ) {
+ my @rows = get_index_statistics(@cxns);
+ push @index_statistics, map { extract_values($_, $_, $_, 'index_statistics') } @rows;
+ }
+ elsif ( $wanted{index_table_statistics} ) {
+ my @rows = get_index_table_statistics(@cxns);
+ push @index_table_statistics, map { extract_values($_, $_, $_, 'index_table_statistics') } @rows;
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ next unless $wanted{$tbl};
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ draw_screen(\@display_lines);
+}
+
+# display_Q {{{3
+sub display_Q {
+ my @display_lines;
+
+ my @q_header;
+ my @processlist;
+ my %rows_for = (
+ q_header => \@q_header,
+ processlist => \@processlist,
+ );
+
+ my @visible = $opts{n} ? 'processlist' : get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+
+ # Get the data
+ my @cxns = get_connections();
+ my @full_processlist = get_full_processlist(@cxns);
+
+ # Create header
+ if ( $wanted{q_header} ) {
+ get_status_info(@cxns);
+ foreach my $cxn ( @cxns ) {
+ my $set = $vars{$cxn}->{$clock};
+ my $pre = $vars{$cxn}->{$clock-1} || $set;
+ my $hash = extract_values($set, $set, $pre, 'q_header');
+ $hash->{cxn} = $cxn;
+ $hash->{when} = 'Total';
+ push @q_header, $hash;
+
+ if ( exists $vars{$cxn}->{$clock - 1} ) {
+ my $inc = inc(0, $cxn);
+ my $hash = extract_values($inc, $set, $pre, 'q_header');
+ $hash->{cxn} = $cxn;
+ $hash->{when} = 'Now';
+ push @q_header, $hash;
+ }
+ }
+ }
+
+ if ( $wanted{processlist} ) {
+ # TODO: save prev values
+ push @processlist, map { extract_values($_, $_, $_, 'processlist') } @full_processlist;
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ next unless $wanted{$tbl};
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ # Save queries in global variable for analysis. The rows in %rows_for have been
+ # filtered, etc as a side effect of set_to_tbl(), so they are the same as the rows
+ # that get pushed to the screen.
+ @current_queries = map {
+ my %hash;
+ @hash{ qw(cxn id db query time user host) }
+ = @{$_}{ qw(cxn mysql_thread_id db info time user hostname) };
+ # time is in seconds-to-time format; convert into something
+ # ascii-sortable.
+ $hash{time} = sprintf('%012s', $hash{time} =~ m/^([^.]*)/);
+ \%hash;
+ } @{$rows_for{processlist}};
+
+ draw_screen(\@display_lines);
+}
+
+# display_R {{{3
+sub display_R {
+ my @display_lines;
+ my @cxns = get_connections();
+ get_status_info(@cxns);
+ get_innodb_status(\@cxns);
+
+ my @row_operations;
+ my @row_operation_misc;
+ my @semaphores;
+ my @wait_array;
+ my %rows_for = (
+ row_operations => \@row_operations,
+ row_operation_misc => \@row_operation_misc,
+ semaphores => \@semaphores,
+ wait_array => \@wait_array,
+ );
+
+ my @visible = get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+ my $incvar = $config{status_inc}->{val};
+
+ foreach my $cxn ( @cxns ) {
+ my $set = $vars{$cxn}->{$clock};
+ my $pre = $vars{$cxn}->{$clock-1} || $set;
+ my $inc; # Only assigned to if wanted
+
+ if ( $set->{IB_ro_complete} ) {
+ if ( $wanted{row_operations} ) {
+ $inc ||= $incvar ? inc(0, $cxn) : $set;
+ push @row_operations, extract_values($inc, $set, $pre, 'row_operations');
+ }
+ if ( $wanted{row_operation_misc} ) {
+ push @row_operation_misc, extract_values($set, $set, $pre, 'row_operation_misc'),
+ }
+ }
+
+ if ( $set->{IB_sm_complete} && $wanted{semaphores} ) {
+ $inc ||= $incvar ? inc(0, $cxn) : $set;
+ push @semaphores, extract_values($inc, $set, $pre, 'semaphores');
+ }
+
+ if ( $set->{IB_sm_wait_array_size} && $wanted{wait_array} ) {
+ foreach my $wait ( @{$set->{IB_sm_waits}} ) {
+ my $hash = extract_values($wait, $wait, $wait, 'wait_array');
+ $hash->{cxn} = $cxn;
+ push @wait_array, $hash;
+ }
+ }
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ draw_screen(\@display_lines);
+}
+
+# display_T {{{3
+sub display_T {
+ my @display_lines;
+
+ my @t_header;
+ my @innodb_transactions;
+ my %rows_for = (
+ t_header => \@t_header,
+ innodb_transactions => \@innodb_transactions,
+ );
+
+ my @visible = $opts{n} ? 'innodb_transactions' : get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+
+ my @cxns = get_connections();
+
+ get_status_info(@cxns);
+
+ # If the header is to be shown, buffer pool data is required.
+ get_innodb_status( \@cxns, [ $wanted{t_header} ? qw(bp) : () ] );
+
+ foreach my $cxn ( get_connections() ) {
+ my $set = $vars{$cxn}->{$clock};
+ my $pre = $vars{$cxn}->{$clock-1} || $set;
+
+ next unless $set->{IB_tx_transactions};
+
+ if ( $wanted{t_header} ) {
+ my $hash = extract_values($set, $set, $pre, 't_header');
+ push @t_header, $hash;
+ }
+
+ if ( $wanted{innodb_transactions} ) {
+ my $cur_txns = $set->{IB_tx_transactions};
+ my $pre_txns = $pre->{IB_tx_transactions} || $cur_txns;
+ my %cur_txns = map { $_->{mysql_thread_id} => $_ } grep { defined $_->{mysql_thread_id} } @$cur_txns;
+ my %pre_txns = map { $_->{mysql_thread_id} => $_ } grep { defined $_->{mysql_thread_id} } @$pre_txns;
+ foreach my $thd_id ( sort keys %cur_txns ) {
+ my $cur_txn = $cur_txns{$thd_id};
+ my $pre_txn = $pre_txns{$thd_id} || $cur_txn;
+ my $hash = extract_values($cur_txn, $cur_txn, $pre_txn, 'innodb_transactions');
+ $hash->{cxn} = $cxn;
+ push @innodb_transactions, $hash;
+ }
+ }
+
+ }
+
+ my $first_table = 0;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+
+ # Save queries in global variable for analysis. The rows in %rows_for have been
+ # filtered, etc as a side effect of set_to_tbl(), so they are the same as the rows
+ # that get pushed to the screen.
+ @current_queries = map {
+ my %hash;
+ @hash{ qw(cxn id db query time user host) }
+ = @{$_}{ qw(cxn mysql_thread_id db query_text active_secs user hostname) };
+ \%hash;
+ } @{$rows_for{innodb_transactions}};
+
+ draw_screen(\@display_lines);
+}
+
+# display_S {{{3
+sub display_S {
+ my $fmt = get_var_set('S_set');
+ my $func = $config{S_func}->{val};
+ my $inc = $func eq 'g' || $config{status_inc}->{val};
+
+ # The table's meta-data is generated from the compiled var_set.
+ my ( $cols, $visible );
+ if ( $tbl_meta{var_status}->{fmt} && $fmt eq $tbl_meta{var_status}->{fmt} ) {
+ ( $cols, $visible ) = @{$tbl_meta{var_status}}{qw(cols visible)};
+ }
+ else {
+ ( $cols, $visible ) = compile_select_stmt($fmt);
+
+ # Apply missing values to columns. Always apply averages across all connections.
+ map {
+ $_->{agg} = 'avg';
+ $_->{label} = $_->{hdr};
+ } values %$cols;
+
+ $tbl_meta{var_status}->{cols} = $cols;
+ $tbl_meta{var_status}->{visible} = $visible;
+ $tbl_meta{var_status}->{fmt} = $fmt;
+ map { $tbl_meta{var_status}->{cols}->{$_}->{just} = ''} @$visible;
+ }
+
+ my @var_status;
+ my %rows_for = (
+ var_status => \@var_status,
+ );
+
+ my @visible = get_visible_tables();
+ my %wanted = map { $_ => 1 } @visible;
+ my @cxns = get_connections();
+
+ get_status_info(@cxns);
+ get_innodb_status(\@cxns);
+
+ # Set up whether to pivot and how many sets to extract.
+ $tbl_meta{var_status}->{pivot} = $func eq 'v';
+
+ my $num_sets
+ = $func eq 'v'
+ ? $config{num_status_sets}->{val}
+ : 0;
+ foreach my $set ( 0 .. $num_sets ) {
+ my @rows;
+ foreach my $cxn ( @cxns ) {
+ my $vars = $inc ? inc($set, $cxn) : $vars{$cxn}->{$clock - $set};
+ my $cur = $vars{$cxn}->{$clock-$set};
+ my $pre = $vars{$cxn}->{$clock-$set-1} || $cur;
+ next unless $vars && %$vars;
+ my $hash = extract_values($vars, $cur, $pre, 'var_status');
+ push @rows, $hash;
+ }
+ @rows = apply_group_by('var_status', [], @rows);
+ push @var_status, @rows;
+ }
+
+ # Recompile the sort func. TODO: avoid recompiling at every refresh.
+ # Figure out whether the data is all numeric and decide on a sort type.
+ # my $cmp
+ # = scalar(
+ # grep { !defined $_ || $_ !~ m/^\d+$/ }
+ # map { my $col = $_; map { $_->{$col} } @var_status }
+ # $tbl_meta{var_status}->{sort_cols} =~ m/(\w+)/g)
+ # ? 'cmp'
+ # : '<=>';
+ $tbl_meta{var_status}->{sort_func} = make_sort_func($tbl_meta{var_status});
+
+ # ################################################################
+ # Now there is specific display code based on $config{S_func}
+ # ################################################################
+ if ( $func =~ m/s|g/ ) {
+ my $min_width = 4;
+
+ # Clear the screen if the display width changed.
+ if ( @last_term_size && $this_term_size[0] != $last_term_size[0] ) {
+ $lines_printed = 0;
+ $clear_screen_sub->();
+ }
+
+ if ( $func eq 's' ) {
+ # Decide how wide columns should be.
+ my $num_cols = scalar(@$visible);
+ my $width = $opts{n} ? 0 : max($min_width, int(($this_term_size[0] - $num_cols + 1) / $num_cols));
+ my $g_format = $opts{n} ? ( "%s\t" x $num_cols ) : ( "%-${width}s " x $num_cols );
+
+ # Print headers every now and then. Headers can get really long, so compact them.
+ my @hdr = @$visible;
+ if ( $opts{n} ) {
+ if ( $lines_printed == 0 ) {
+ print join("\t", @hdr), "\n";
+ $lines_printed++;
+ }
+ }
+ elsif ( $lines_printed == 0 || $lines_printed > $this_term_size[1] - 2 ) {
+ @hdr = map { donut(crunch($_, $width), $width) } @hdr;
+ print join(' ', map { sprintf( "%${width}s", donut($_, $width)) } @hdr) . "\n";
+ $lines_printed = 1;
+ }
+
+ # Design a column format for the values.
+ my $format
+ = $opts{n}
+ ? join("\t", map { '%s' } @$visible) . "\n"
+ : join(' ', map { "%${width}s" } @hdr) . "\n";
+
+ foreach my $row ( @var_status ) {
+ printf($format, map { defined $_ ? $_ : '' } @{$row}{ @$visible });
+ $lines_printed++;
+ }
+ }
+ else { # 'g' mode
+ # Design a column format for the values.
+ my $num_cols = scalar(@$visible);
+ my $width = $opts{n} ? 0 : int(($this_term_size[0] - $num_cols + 1) / $num_cols);
+ my $format = $opts{n} ? ( "%s\t" x $num_cols ) : ( "%-${width}s " x $num_cols );
+ $format =~ s/\s$/\n/;
+
+ # Print headers every now and then.
+ if ( $opts{n} ) {
+ if ( $lines_printed == 0 ) {
+ print join("\t", @$visible), "\n";
+ print join("\t", map { shorten($mvs{$_}) } @$visible), "\n";
+ }
+ }
+ elsif ( $lines_printed == 0 || $lines_printed > $this_term_size[1] - 2 ) {
+ printf($format, map { donut(crunch($_, $width), $width) } @$visible);
+ printf($format, map { shorten($mvs{$_} || 0) } @$visible);
+ $lines_printed = 2;
+ }
+
+ # Update the max ever seen, and scale by the max ever seen.
+ my $set = $var_status[0];
+ foreach my $col ( @$visible ) {
+ $set->{$col} = 1 unless defined $set->{$col} && $set->{$col} =~ m/$num_regex/;
+ $set->{$col} = ($set->{$col} || 1) / ($set->{Uptime_hires} || 1);
+ $mvs{$col} = max($mvs{$col} || 1, $set->{$col});
+ $set->{$col} /= $mvs{$col};
+ }
+ printf($format, map { ( $config{graph_char}->{val} x int( $width * $set->{$_} )) || '.' } @$visible );
+ $lines_printed++;
+
+ }
+ }
+ else { # 'v'
+ my $first_table = 0;
+ my @display_lines;
+ foreach my $tbl ( @visible ) {
+ push @display_lines, '', set_to_tbl($rows_for{$tbl}, $tbl);
+ push @display_lines, get_cxn_errors(@cxns)
+ if ( $config{debug}->{val} || !$first_table++ );
+ }
+ $clear_screen_sub->();
+ draw_screen( \@display_lines );
+ }
+}
+
+# display_explain {{{3
+sub display_explain {
+ my $info = shift;
+ my $cxn = $info->{cxn};
+ my $db = $info->{db};
+
+ my ( $mods, $query ) = rewrite_for_explain($info->{query});
+
+ my @display_lines;
+
+ if ( $query ) {
+
+ my $part = version_ge($dbhs{$cxn}->{dbh}, '5.1.5') ? 'PARTITIONS' : '';
+ $query = "EXPLAIN $part\n" . $query;
+
+ eval {
+ if ( $db ) {
+ do_query($cxn, "use $db");
+ }
+ my $sth = do_query($cxn, $query);
+
+ my $res;
+ while ( $res = $sth->fetchrow_hashref() ) {
+ map { $res->{$_} ||= '' } ( 'partitions', keys %$res);
+ my @this_table = create_caption("Sub-Part $res->{id}",
+ create_table2(
+ $tbl_meta{explain}->{visible},
+ meta_to_hdr('explain'),
+ extract_values($res, $res, $res, 'explain')));
+ @display_lines = stack_next(\@display_lines, \@this_table, { pad => ' ', vsep => 2 });
+ }
+ };
+
+ if ( $EVAL_ERROR ) {
+ push @display_lines,
+ '',
+ "The query could not be explained. Only SELECT queries can be "
+ . "explained; innotop tries to rewrite certain REPLACE and INSERT queries "
+ . "into SELECT, but this doesn't always succeed.";
+ }
+
+ }
+ else {
+ push @display_lines, '', 'The query could not be explained.';
+ }
+
+ if ( $mods ) {
+ push @display_lines, '', '[This query has been re-written to be explainable]';
+ }
+
+ unshift @display_lines, no_ctrl_char($query);
+ draw_screen(\@display_lines, { raw => 1 } );
+}
+
+# rewrite_for_explain {{{3
+sub rewrite_for_explain {
+ my $query = shift;
+
+ my $mods = 0;
+ my $orig = $query;
+ $mods += $query =~ s/^\s*(?:replace|insert).*?select/select/is;
+ $mods += $query =~ s/^
+ \s*create\s+(?:temporary\s+)?table
+ \s+(?:\S+\s+)as\s+select/select/xis;
+ $mods += $query =~ s/\s+on\s+duplicate\s+key\s+update.*$//is;
+ return ( $mods, $query );
+}
+
+# show_optimized_query {{{3
+sub show_optimized_query {
+ my $info = shift;
+ my $cxn = $info->{cxn};
+ my $db = $info->{db};
+ my $meta = $dbhs{$cxn};
+
+ my @display_lines;
+
+ my ( $mods, $query ) = rewrite_for_explain($info->{query});
+
+ if ( $mods ) {
+ push @display_lines, '[This query has been re-written to be explainable]';
+ }
+
+ if ( $query ) {
+ push @display_lines, no_ctrl_char($info->{query});
+
+ eval {
+ if ( $db ) {
+ do_query($cxn, "use $db");
+ }
+ do_query( $cxn, 'EXPLAIN EXTENDED ' . $query ) or die "Can't explain query";
+ my $sth = do_query($cxn, 'SHOW WARNINGS');
+ my $res = $sth->fetchall_arrayref({});
+
+ if ( $res ) {
+ foreach my $result ( @$res ) {
+ push @display_lines, 'Note:', no_ctrl_char($result->{message});
+ }
+ }
+ else {
+ push @display_lines, '', 'The query optimization could not be generated.';
+ }
+ };
+
+ if ( $EVAL_ERROR ) {
+ push @display_lines, '', "The optimization could not be generated: $EVAL_ERROR";
+ }
+
+ }
+ else {
+ push @display_lines, '', 'The query optimization could not be generated.';
+ }
+
+ draw_screen(\@display_lines, { raw => 1 } );
+}
+
+# display_help {{{3
+sub display_help {
+ my $mode = $config{mode}->{val};
+
+ # Get globally mapped keys, then overwrite them with mode-specific ones.
+ my %keys = map {
+ $_ => $action_for{$_}->{label}
+ } keys %action_for;
+ foreach my $key ( keys %{$modes{$mode}->{action_for}} ) {
+ $keys{$key} = $modes{$mode}->{action_for}->{$key}->{label};
+ }
+ delete $keys{'?'};
+
+ # Split them into three kinds of keys: MODE keys, action keys, and
+ # magic (special character) keys.
+ my @modes = sort grep { m/[A-Z]/ } keys %keys;
+ my @actions = sort grep { m/[a-z]/ } keys %keys;
+ my @magic = sort grep { m/[^A-Z]/i } keys %keys;
+
+ my @display_lines = ( '', 'Switch to a different mode:' );
+
+ # Mode keys
+ my @all_modes = map { "$_ $modes{$_}->{hdr}" } @modes;
+ my @col1 = splice(@all_modes, 0, ceil(@all_modes/3));
+ my @col2 = splice(@all_modes, 0, ceil(@all_modes/2));
+ my $max1 = max(map {length($_)} @col1);
+ my $max2 = max(map {length($_)} @col2);
+ while ( @col1 ) {
+ push @display_lines, sprintf(" %-${max1}s %-${max2}s %s",
+ (shift @col1 || ''),
+ (shift @col2 || ''),
+ (shift @all_modes || ''));
+ }
+
+ # Action keys
+ my @all_actions = map { "$_ $keys{$_}" } @actions;
+ @col1 = splice(@all_actions, 0, ceil(@all_actions/2));
+ $max1 = max(map {length($_)} @col1);
+ push @display_lines, '', 'Actions:';
+ while ( @col1 ) {
+ push @display_lines, sprintf(" %-${max1}s %s",
+ (shift @col1 || ''),
+ (shift @all_actions || ''));
+ }
+
+ # Magic keys
+ my @all_magic = map {
+ my $k = $action_for{$_} ? ($action_for{$_}->{key} || $_) : $_;
+ sprintf('%4s %s', $k, $keys{$_});
+ } @magic;
+ @col1 = splice(@all_magic, 0, ceil(@all_magic/2));
+ $max1 = max(map {length($_)} @col1);
+ push @display_lines, '', 'Other:';
+ while ( @col1 ) {
+ push @display_lines, sprintf("%-${max1}s%s",
+ (shift @col1 || ''),
+ (shift @all_magic || ''));
+ }
+
+ $clear_screen_sub->();
+ draw_screen(\@display_lines, { show_all => 1 } );
+ pause();
+ $clear_screen_sub->();
+}
+
+# show_full_query {{{3
+sub show_full_query {
+ my $info = shift;
+ my @display_lines = no_ctrl_char($info->{query});
+ draw_screen(\@display_lines, { raw => 1 });
+}
+
+# Formatting functions {{{2
+
+# create_table2 {{{3
+# Makes a two-column table, labels on left, data on right.
+# Takes refs of @cols, %labels and %data, %user_prefs
+sub create_table2 {
+ my ( $cols, $labels, $data, $user_prefs ) = @_;
+ my @rows;
+
+ if ( @$cols && %$data ) {
+
+ # Override defaults
+ my $p = {
+ just => '',
+ sep => ':',
+ just1 => '-',
+ };
+ if ( $user_prefs ) {
+ map { $p->{$_} = $user_prefs->{$_} } keys %$user_prefs;
+ }
+
+ # Fix undef values
+ map { $data->{$_} = '' unless defined $data->{$_} } @$cols;
+
+ # Format the table
+ my $max_l = max(map{ length($labels->{$_}) } @$cols);
+ my $max_v = max(map{ length($data->{$_}) } @$cols);
+ my $format = "%$p->{just}${max_l}s$p->{sep} %$p->{just1}${max_v}s";
+ foreach my $col ( @$cols ) {
+ push @rows, sprintf($format, $labels->{$col}, $data->{$col});
+ }
+ }
+ return @rows;
+}
+
+# stack_next {{{3
+# Stacks one display section next to the other. Accepts left-hand arrayref,
+# right-hand arrayref, and options hashref. Tries to stack as high as
+# possible, so
+# aaaaaa
+# bbb
+# can stack ccc next to the bbb.
+# NOTE: this DOES modify its arguments, even though it returns a new array.
+sub stack_next {
+ my ( $left, $right, $user_prefs ) = @_;
+ my @result;
+
+ my $p = {
+ pad => ' ',
+ vsep => 0,
+ };
+ if ( $user_prefs ) {
+ map { $p->{$_} = $user_prefs->{$_} } keys %$user_prefs;
+ }
+
+ # Find out how wide the LHS can be and still let the RHS fit next to it.
+ my $pad = $p->{pad};
+ my $max_r = max( map { length($_) } @$right) || 0;
+ my $max_l = $this_term_size[0] - $max_r - length($pad);
+
+ # Find the minimum row on the LHS that the RHS will fit next to.
+ my $i = scalar(@$left) - 1;
+ while ( $i >= 0 && length($left->[$i]) <= $max_l ) {
+ $i--;
+ }
+ $i++;
+ my $offset = $i;
+
+ if ( $i < scalar(@$left) ) {
+ # Find the max width of the section of the LHS against which the RHS
+ # will sit.
+ my $max_i_in_common = min($i + scalar(@$right) - 1, scalar(@$left) - 1);
+ my $max_width = max( map { length($_) } @{$left}[$i..$max_i_in_common]);
+
+ # Append the RHS onto the LHS until one runs out.
+ while ( $i < @$left && $i - $offset < @$right ) {
+ my $format = "%-${max_width}s$pad%${max_r}s";
+ $left->[$i] = sprintf($format, $left->[$i], $right->[$i - $offset]);
+ $i++;
+ }
+ while ( $i - $offset < @$right ) {
+ # There is more RHS to push on the end of the array
+ push @$left,
+ sprintf("%${max_width}s$pad%${max_r}s", ' ', $right->[$i - $offset]);
+ $i++;
+ }
+ push @result, @$left;
+ }
+ else {
+ # There is no room to put them side by side. Add them below, with
+ # a blank line above them if specified.
+ push @result, @$left;
+ push @result, (' ' x $this_term_size[0]) if $p->{vsep} && @$left;
+ push @result, @$right;
+ }
+ return @result;
+}
+
+# create_caption {{{3
+sub create_caption {
+ my ( $caption, @rows ) = @_;
+ if ( @rows ) {
+
+ # Calculate the width of what will be displayed, so it can be centered
+ # in that space. When the thing is wider than the display, center the
+ # caption in the display.
+ my $width = min($this_term_size[0], max(map { length(ref($_) ? $_->[0] : $_) } @rows));
+
+ my $cap_len = length($caption);
+
+ # It may be narrow enough to pad the sides with underscores and save a
+ # line on the screen.
+ if ( $cap_len <= $width - 6 ) {
+ my $left = int(($width - 2 - $cap_len) / 2);
+ unshift @rows,
+ ("_" x $left) . " $caption " . ("_" x ($width - $left - $cap_len - 2));
+ }
+
+ # The caption is too wide to add underscores on each side.
+ else {
+
+ # Color is supported, so we can use terminal underlining.
+ if ( $config{color}->{val} ) {
+ my $left = int(($width - $cap_len) / 2);
+ unshift @rows, [
+ (" " x $left) . $caption . (" " x ($width - $left - $cap_len)),
+ 'underline',
+ ];
+ }
+
+ # Color is not supported, so we have to add a line underneath to separate the
+ # caption from whatever it's captioning.
+ else {
+ my $left = int(($width - $cap_len) / 2);
+ unshift @rows, ('-' x $width);
+ unshift @rows, (" " x $left) . $caption . (" " x ($width - $left - $cap_len));
+ }
+
+ # The caption is wider than the thing it labels, so we have to pad the
+ # thing it labels to a consistent width.
+ if ( $cap_len > $width ) {
+ @rows = map {
+ ref($_)
+ ? [ sprintf('%-' . $cap_len . 's', $_->[0]), $_->[1] ]
+ : sprintf('%-' . $cap_len . 's', $_);
+ } @rows;
+ }
+
+ }
+ }
+ return @rows;
+}
+
+# create_table {{{3
+# Input: an arrayref of columns, hashref of col info, and an arrayref of hashes
+# Example: [ 'a', 'b' ]
+# { a => spec, b => spec }
+# [ { a => 1, b => 2}, { a => 3, b => 4 } ]
+# The 'spec' is a hashref of hdr => label, just => ('-' or ''). It also supports min and max-widths
+# vi the minw and maxw params.
+# Output: an array of strings, one per row.
+# Example:
+# Column One Column Two
+# ---------- ----------
+# 1 2
+# 3 4
+sub create_table {
+ my ( $cols, $info, $data, $prefs ) = @_;
+ $prefs ||= {};
+ $prefs->{no_hdr} ||= ($opts{n} && $clock != 1);
+
+ # Truncate rows that will surely be off screen even if this is the only table.
+ if ( !$opts{n} && !$prefs->{raw} && !$prefs->{show_all} && $this_term_size[1] < @$data-1 ) {
+ $data = [ @$data[0..$this_term_size[1] - 1] ];
+ }
+
+ my @rows = ();
+
+ if ( @$cols && %$info ) {
+
+ # Fix undef values, collapse whitespace.
+ foreach my $row ( @$data ) {
+ map { $row->{$_} = collapse_ws($row->{$_}) } @$cols;
+ }
+
+ my $col_sep = $opts{n} ? "\t" : ' ';
+
+ # Find each column's max width.
+ my %width_for;
+ if ( !$opts{n} ) {
+ %width_for = map {
+ my $col_name = $_;
+ if ( $info->{$_}->{dec} ) {
+ # Align along the decimal point
+ my $max_rodp = max(0, map { $_->{$col_name} =~ m/([^\s\d-].*)$/ ? length($1) : 0 } @$data);
+ foreach my $row ( @$data ) {
+ my $col = $row->{$col_name};
+ my ( $l, $r ) = $col =~ m/^([\s\d]*)(.*)$/;
+ $row->{$col_name} = sprintf("%s%-${max_rodp}s", $l, $r);
+ }
+ }
+ my $max_width = max( length($info->{$_}->{hdr}), map { length($_->{$col_name}) } @$data);
+ if ( $info->{$col_name}->{maxw} ) {
+ $max_width = min( $max_width, $info->{$col_name}->{maxw} );
+ }
+ if ( $info->{$col_name}->{minw} ) {
+ $max_width = max( $max_width, $info->{$col_name}->{minw} );
+ }
+ $col_name => $max_width;
+ } @$cols;
+ }
+
+ # The table header.
+ if ( !$config{hide_hdr}->{val} && !$prefs->{no_hdr} ) {
+ push @rows, $opts{n}
+ ? join( $col_sep, @$cols )
+ : join( $col_sep, map { sprintf( "%-$width_for{$_}s", trunc($info->{$_}->{hdr}, $width_for{$_}) ) } @$cols );
+ if ( $config{color}->{val} && $config{header_highlight}->{val} ) {
+ push @rows, [ pop @rows, $config{header_highlight}->{val} ];
+ }
+ elsif ( !$opts{n} ) {
+ push @rows, join( $col_sep, map { "-" x $width_for{$_} } @$cols );
+ }
+ }
+
+ # The table data.
+ if ( $opts{n} ) {
+ foreach my $item ( @$data ) {
+ push @rows, join($col_sep, map { $item->{$_} } @$cols );
+ }
+ }
+ else {
+ my $format = join( $col_sep,
+ map { "%$info->{$_}->{just}$width_for{$_}s" } @$cols );
+ foreach my $item ( @$data ) {
+ my $row = sprintf($format, map { trunc($item->{$_}, $width_for{$_}) } @$cols );
+ if ( $config{color}->{val} && $item->{_color} ) {
+ push @rows, [ $row, $item->{_color} ];
+ }
+ else {
+ push @rows, $row;
+ }
+ }
+ }
+ }
+
+ return @rows;
+}
+
+# Aggregates a table. If $group_by is an arrayref of columns, the grouping key
+# is the specified columns; otherwise it's just the empty string (e.g.
+# everything is grouped as one group).
+sub apply_group_by {
+ my ( $tbl, $group_by, @rows ) = @_;
+ my $meta = $tbl_meta{$tbl};
+ my %is_group = map { $_ => 1 } @$group_by;
+ my @non_grp = grep { !$is_group{$_} } keys %{$meta->{cols}};
+
+ my %temp_table;
+ foreach my $row ( @rows ) {
+ my $group_key
+ = @$group_by
+ ? '{' . join('}{', map { defined $_ ? $_ : '' } @{$row}{@$group_by}) . '}'
+ : '';
+ $temp_table{$group_key} ||= [];
+ push @{$temp_table{$group_key}}, $row;
+ }
+
+ # Crush the rows together...
+ my @new_rows;
+ foreach my $key ( sort keys %temp_table ) {
+ my $group = $temp_table{$key};
+ my %new_row;
+ @new_row{@$group_by} = @{$group->[0]}{@$group_by};
+ foreach my $col ( @non_grp ) {
+ my $agg = $meta->{cols}->{$col}->{agg} || 'first';
+ $new_row{$col} = $agg_funcs{$agg}->( map { $_->{$col} } @$group );
+ }
+ push @new_rows, \%new_row;
+ }
+ return @new_rows;
+}
+
+# set_to_tbl {{{3
+# Unifies all the work of filtering, sorting etc. Alters the input.
+# TODO: pull all the little pieces out into subroutines and stick events in each of them.
+sub set_to_tbl {
+ my ( $rows, $tbl ) = @_;
+ my $meta = $tbl_meta{$tbl} or die "No such table $tbl in tbl_meta";
+
+ # don't show / hide cxn if there's only one connection being displayed
+ my (@visible, @group_by);
+ my $num_cxn = scalar get_connections();
+ if ($num_cxn <= 1) {
+ map { push @visible, $_ if $_ !~ /^cxn$/ } @{$meta->{visible}};
+ $meta->{visible} = \@visible;
+ map { push @group_by, $_ if $_ !~ /^cxn$/ } @{$meta->{group_by}};
+ $meta->{group_by} = \@group_by;
+ }
+ # if cxn is not visible and there is now more than one connection,
+ # make cxn visible again. assume it's not in group_by if it's not
+ # visible
+ else {
+ my $has_cxn = 0;
+ foreach my $column (@{$meta->{visible}}) {
+ if ($column eq "cxn") {
+ $has_cxn = 1;
+ last;
+ }
+ }
+ if (not $has_cxn) {
+ map { push @visible, $_ if $_ !~ /^cxn$/ } @{$meta->{visible}};
+ $meta->{visible} = \@visible;
+ map { push @group_by, $_ if $_ !~ /^cxn$/ } @{$meta->{group_by}};
+ $meta->{group_by} = \@group_by;
+ }
+ }
+
+ if ( !$meta->{pivot} ) {
+
+ # Hook in event listeners
+ foreach my $listener ( @{$event_listener_for{set_to_tbl_pre_filter}} ) {
+ $listener->set_to_tbl_pre_filter($rows, $tbl);
+ }
+
+ # Apply filters. Note that if the table is pivoted, filtering and sorting
+ # are applied later.
+ foreach my $filter ( @{$meta->{filters}} ) {
+ eval {
+ @$rows = grep { $filters{$filter}->{func}->($_) } @$rows;
+ };
+ if ( $EVAL_ERROR && $config{debug}->{val} ) {
+ die $EVAL_ERROR;
+ }
+ }
+
+ foreach my $listener ( @{$event_listener_for{set_to_tbl_pre_sort}} ) {
+ $listener->set_to_tbl_pre_sort($rows, $tbl);
+ }
+
+ # Sort. Note that if the table is pivoted, sorting might have the wrong
+ # columns and it could crash. This will only be an issue if it's possible
+ # to toggle pivoting on and off, which it's not at the moment.
+ if ( @$rows && $meta->{sort_func} && !$meta->{aggregate} ) {
+ if ( $meta->{sort_dir} > 0 ) {
+ @$rows = $meta->{sort_func}->( @$rows );
+ }
+ else {
+ @$rows = reverse $meta->{sort_func}->( @$rows );
+ }
+ }
+
+ }
+
+ # Stop altering arguments now.
+ my @rows = @$rows;
+
+ foreach my $listener ( @{$event_listener_for{set_to_tbl_pre_group}} ) {
+ $listener->set_to_tbl_pre_group(\@rows, $tbl);
+ }
+
+ # Apply group-by.
+ if ( $meta->{aggregate} ) {
+ @rows = apply_group_by($tbl, $meta->{group_by}, @rows);
+
+ # Sort. Note that if the table is pivoted, sorting might have the wrong
+ # columns and it could crash. This will only be an issue if it's possible
+ # to toggle pivoting on and off, which it's not at the moment.
+ if ( @rows && $meta->{sort_func} ) {
+ if ( $meta->{sort_dir} > 0 ) {
+ @rows = $meta->{sort_func}->( @rows );
+ }
+ else {
+ @rows = reverse $meta->{sort_func}->( @rows );
+ }
+ }
+
+ }
+
+ foreach my $listener ( @{$event_listener_for{set_to_tbl_pre_colorize}} ) {
+ $listener->set_to_tbl_pre_colorize(\@rows, $tbl);
+ }
+
+ if ( !$meta->{pivot} ) {
+ # Colorize. Adds a _color column to rows.
+ if ( @rows && $meta->{color_func} ) {
+ eval {
+ foreach my $row ( @rows ) {
+ $row->{_color} = $meta->{color_func}->($row);
+ }
+ };
+ if ( $EVAL_ERROR ) {
+ pause($EVAL_ERROR);
+ }
+ }
+ }
+
+ foreach my $listener ( @{$event_listener_for{set_to_tbl_pre_transform}} ) {
+ $listener->set_to_tbl_pre_transform(\@rows, $tbl);
+ }
+
+ # Apply_transformations.
+ if ( @rows ) {
+ my $cols = $meta->{cols};
+ foreach my $col ( keys %{$rows->[0]} ) {
+ # Don't auto-vivify $tbl_meta{tbl}-{cols}->{_color}->{trans}
+ next if $col eq '_color';
+ foreach my $trans ( @{$cols->{$col}->{trans}} ) {
+ map { $_->{$col} = $trans_funcs{$trans}->($_->{$col}) } @rows;
+ }
+ }
+ }
+
+ my ($fmt_cols, $fmt_meta);
+
+ # Pivot.
+ if ( $meta->{pivot} ) {
+
+ foreach my $listener ( @{$event_listener_for{set_to_tbl_pre_pivot}} ) {
+ $listener->set_to_tbl_pre_pivot(\@rows, $tbl);
+ }
+
+ my @vars = @{$meta->{visible}};
+ my @tmp = map { { name => $_ } } @vars;
+ my @cols = 'name';
+ foreach my $i ( 0..@$rows-1 ) {
+ my $col = "set_$i";
+ push @cols, $col;
+ foreach my $j ( 0..@vars-1 ) {
+ $tmp[$j]->{$col} = $rows[$i]->{$vars[$j]};
+ }
+ }
+ $fmt_meta = { map { $_ => { hdr => $_, just => '-' } } @cols };
+ $fmt_cols = \@cols;
+ @rows = @tmp;
+
+ # Hook in event listeners
+ foreach my $listener ( @{$event_listener_for{set_to_tbl_pre_filter}} ) {
+ $listener->set_to_tbl_pre_filter($rows, $tbl);
+ }
+
+ # Apply filters.
+ foreach my $filter ( @{$meta->{filters}} ) {
+ eval {
+ @rows = grep { $filters{$filter}->{func}->($_) } @rows;
+ };
+ if ( $EVAL_ERROR && $config{debug}->{val} ) {
+ die $EVAL_ERROR;
+ }
+ }
+
+ foreach my $listener ( @{$event_listener_for{set_to_tbl_pre_sort}} ) {
+ $listener->set_to_tbl_pre_sort($rows, $tbl);
+ }
+
+ # Sort.
+ if ( @rows && $meta->{sort_func} ) {
+ if ( $meta->{sort_dir} > 0 ) {
+ @rows = $meta->{sort_func}->( @rows );
+ }
+ else {
+ @rows = reverse $meta->{sort_func}->( @rows );
+ }
+ }
+
+ }
+ else {
+ # If the table isn't pivoted, just show all columns that are supposed to
+ # be shown; but eliminate aggonly columns if the table isn't aggregated.
+ my $aggregated = $meta->{aggregate};
+ $fmt_cols = [ grep { $aggregated || !$meta->{cols}->{$_}->{aggonly} } @{$meta->{visible}} ];
+ $fmt_meta = { map { $_ => $meta->{cols}->{$_} } @$fmt_cols };
+
+ # If the table is aggregated, re-order the group_by columns to the left of
+ # the display, and suppress 'agghide' columns.
+ if ( $aggregated ) {
+ my %is_group = map { $_ => 1 } @{$meta->{group_by}};
+ $fmt_cols = [ @{$meta->{group_by}}, grep { !$is_group{$_} } @$fmt_cols ];
+ $fmt_cols = [ grep { !$meta->{cols}->{$_}->{agghide} } @$fmt_cols ];
+ }
+ }
+
+ foreach my $listener ( @{$event_listener_for{set_to_tbl_pre_create}} ) {
+ $listener->set_to_tbl_pre_create(\@rows, $tbl);
+ }
+
+ @rows = create_table( $fmt_cols, $fmt_meta, \@rows);
+ if ( !$meta->{hide_caption} && !$opts{n} && $config{display_table_captions}->{val} ) {
+ @rows = create_caption($meta->{capt}, @rows)
+ }
+
+ foreach my $listener ( @{$event_listener_for{set_to_tbl_post_create}} ) {
+ $listener->set_to_tbl_post_create(\@rows, $tbl);
+ }
+
+ return @rows;
+}
+
+# meta_to_hdr {{{3
+sub meta_to_hdr {
+ my $tbl = shift;
+ my $meta = $tbl_meta{$tbl};
+ my %labels = map { $_ => $meta->{cols}->{$_}->{hdr} } @{$meta->{visible}};
+ return \%labels;
+}
+
+# commify {{{3
+# From perlfaq5: add commas.
+sub commify {
+ my ( $num ) = @_;
+ $num = 0 unless defined $num;
+ $num =~ s/(^[-+]?\d+?(?=(?>(?:\d{3})+)(?!\d))|\G\d{3}(?=\d))/$1,/g;
+ return $num;
+}
+
+# set_precision {{{3
+# Trim to desired precision.
+sub set_precision {
+ my ( $num, $precision ) = @_;
+ $num = 0 unless defined $num;
+ $precision = $config{num_digits}->{val} if !defined $precision;
+ if ( $num eq "" ) {
+ $num = int(0);
+ }
+ sprintf("%.${precision}f", $num);
+}
+
+# percent {{{3
+# Convert to percent
+sub percent {
+ my ( $num ) = @_;
+ $num = 0 unless defined $num;
+ if ( $num eq "" ) {
+ $num = int(0);
+ }
+ my $digits = $config{num_digits}->{val};
+ return sprintf("%.${digits}f", $num * 100)
+ . ($config{show_percent}->{val} ? '%' : '');
+}
+
+# sparkify {{{3
+# Find the range (min to max) and divide it up. Each value then gets put into
+# a bucket and represented by one of these characters: _.-=^
+sub sparkify {
+ my @vals = @_;
+ my @chars = qw(_ . - = ^);
+ my $min = min(@vals);
+ my $max = max(@vals);
+ my $range = ($max - $min) / 4;
+ return "_" x scalar(@vals) if !$min || !$max || $max == $min || !$range;
+ my $result = "";
+ foreach my $v ( @vals ) {
+ $result .= $chars[ int(($v - $min) / $range) ];
+ }
+ return $result;
+}
+
+# shorten {{{3
+sub shorten {
+ my ( $num, $opts ) = @_;
+
+ return $num if !defined($num) || $opts{n} || $num !~ m/$num_regex/;
+
+ $opts ||= {};
+ my $pad = defined $opts->{pad} ? $opts->{pad} : '';
+ my $num_digits = defined $opts->{num_digits}
+ ? $opts->{num_digits}
+ : $config{num_digits}->{val};
+ my $force = defined $opts->{force};
+
+ my $n = 0;
+ while ( $num >= 1_024 ) {
+ $num /= 1_024;
+ ++$n;
+ }
+ return $num =~ m/\./ || $n || $force
+ ? sprintf("%.${num_digits}f%s", $num, ($pad,'k','M','G','T')[$n])
+ : $num;
+}
+
+# Utility functions {{{2
+# unique {{{3
+sub unique {
+ my %seen;
+ return grep { !$seen{$_}++ } @_;
+}
+
+# make_color_func {{{3
+sub make_color_func {
+ my ( $tbl ) = @_;
+ my @criteria;
+ foreach my $spec ( @{$tbl->{colors}} ) {
+ next unless exists $comp_ops{$spec->{op}};
+ my $val = $spec->{op} =~ m/^(?:eq|ne|le|ge|lt|gt)$/ ? "'$spec->{arg}'"
+ : $spec->{op} =~ m/^(?:=~|!~)$/ ? "m/" . quotemeta($spec->{arg}) . "/"
+ : $spec->{arg};
+ push @criteria,
+ "( defined \$set->{$spec->{col}} && \$set->{$spec->{col}} $spec->{op} $val ) { return '$spec->{color}'; }";
+ }
+ return unless @criteria;
+ my $sub = eval 'sub { my ( $set ) = @_; if ' . join(" elsif ", @criteria) . '}';
+ die if $EVAL_ERROR;
+ return $sub;
+}
+
+# make_sort_func {{{3
+# Gets a list of sort columns from the table, like "+cxn -time" and returns a
+# subroutine that will sort that way.
+sub make_sort_func {
+ my ( $tbl ) = @_;
+ my @criteria;
+
+ # Pivoted tables can be sorted by 'name' and set_x columns; others must be
+ # sorted by existing columns. TODO: this will crash if you toggle between
+ # pivoted and nonpivoted. I have several other 'crash' notes about this if
+ # this ever becomes possible.
+
+ if ( $tbl->{pivot} ) {
+ # Sort type is not really possible on pivoted columns, because a 'column'
+ # contains data from an entire non-pivoted row, so there could be a mix of
+ # numeric and non-numeric data. Thus everything has to be 'cmp' type.
+ foreach my $col ( split(/\s+/, $tbl->{sort_cols} ) ) {
+ next unless $col;
+ my ( $dir, $name ) = $col =~ m/([+-])?(\w+)$/;
+ next unless $name && $name =~ m/^(?:name|set_\d+)$/;
+ $dir ||= '+';
+ my $op = 'cmp';
+ my $df = "''";
+ push @criteria,
+ $dir eq '+'
+ ? "(\$a->{$name} || $df) $op (\$b->{$name} || $df)"
+ : "(\$b->{$name} || $df) $op (\$a->{$name} || $df)";
+ }
+ }
+ else {
+ foreach my $col ( split(/\s+/, $tbl->{sort_cols} ) ) {
+ next unless $col;
+ my ( $dir, $name ) = $col =~ m/([+-])?(\w+)$/;
+ next unless $name && $tbl->{cols}->{$name};
+ $dir ||= '+';
+ my $op = $tbl->{cols}->{$name}->{num} ? "<=>" : "cmp";
+ my $df = $tbl->{cols}->{$name}->{num} ? "0" : "''";
+ push @criteria,
+ $dir eq '+'
+ ? "(\$a->{$name} || $df) $op (\$b->{$name} || $df)"
+ : "(\$b->{$name} || $df) $op (\$a->{$name} || $df)";
+ }
+ }
+ return sub { return @_ } unless @criteria;
+ my $sub = eval 'sub { sort {' . join("||", @criteria) . '} @_; }';
+ die if $EVAL_ERROR;
+ return $sub;
+}
+
+# trunc {{{3
+# Shortens text to specified length.
+sub trunc {
+ my ( $text, $len ) = @_;
+ if ( length($text) <= $len ) {
+ return $text;
+ }
+ return substr($text, 0, $len);
+}
+
+# donut {{{3
+# Takes out the middle of text to shorten it.
+sub donut {
+ my ( $text, $len ) = @_;
+ return $text if length($text) <= $len;
+ my $max = length($text) - $len;
+ my $min = $max - 1;
+
+ # Try to remove a single "word" from somewhere in the center
+ if ( $text =~ s/_[^_]{$min,$max}_/_/ ) {
+ return $text;
+ }
+
+ # Prefer removing the end of a "word"
+ if ( $text =~ s/([^_]+)[^_]{$max}_/$1_/ ) {
+ return $text;
+ }
+
+ $text = substr($text, 0, int($len/2))
+ . "_"
+ . substr($text, int($len/2) + $max + 1);
+ return $text;
+}
+
+# crunch {{{3
+# Removes vowels and compacts repeated letters to shorten text.
+sub crunch {
+ my ( $text, $len ) = @_;
+ return $text if $len && length($text) <= $len;
+ $text =~ s/^IB_\w\w_//;
+ $text =~ s/(?<![_ ])[aeiou]//g;
+ $text =~ s/(.)\1+/$1/g;
+ return $text;
+}
+
+# collapse_ws {{{3
+# Collapses all whitespace to a single space.
+sub collapse_ws {
+ my ( $text ) = @_;
+ return '' unless defined $text;
+ $text =~ s/\s+/ /g;
+ return $text;
+}
+
+# Strips out non-printable characters within fields, which freak terminals out.
+sub no_ctrl_char {
+ my ( $text ) = @_;
+ return '' unless defined $text;
+ my $charset = $config{charset}->{val};
+ if ( $charset && $charset eq 'unicode' ) {
+ $text =~ s/
+ ("(?:(?!(?<!\\)").)*" # Double-quoted string
+ |'(?:(?!(?<!\\)').)*') # Or single-quoted string
+ /$1 =~ m#\p{IsC}# ? "[BINARY]" : $1/egx;
+ }
+ elsif ( $charset && $charset eq 'none' ) {
+ $text =~ s/
+ ("(?:(?!(?<!\\)").)*"
+ |'(?:(?!(?<!\\)').)*')
+ /[TEXT]/gx;
+ }
+ else { # The default is 'ascii'
+ $text =~ s/
+ ("(?:(?!(?<!\\)").)*"
+ |'(?:(?!(?<!\\)').)*')
+ /$1 =~ m#[^\040-\176]# ? "[BINARY]" : $1/egx;
+ }
+ return $text;
+}
+
+# word_wrap {{{3
+# Wraps text at word boundaries so it fits the screen.
+sub word_wrap {
+ my ( $text, $width) = @_;
+ $width ||= $this_term_size[0];
+ $text =~ s/(.{0,$width})(?:\s+|$)/$1\n/g;
+ $text =~ s/ +$//mg;
+ return $text;
+}
+
+# draw_screen {{{3
+# Prints lines to the screen. The first argument is an arrayref. Each
+# element of the array is either a string or an arrayref. If it's a string it
+# just gets printed. If it's an arrayref, the first element is the string to
+# print, and the second is args to colored().
+sub draw_screen {
+ my ( $display_lines, $prefs ) = @_;
+ if ( !$opts{n} && $config{show_statusbar}->{val} ) {
+ unshift @$display_lines, create_statusbar();
+ }
+
+ foreach my $listener ( @{$event_listener_for{draw_screen}} ) {
+ $listener->draw_screen($display_lines);
+ }
+
+ $clear_screen_sub->()
+ if $prefs->{clear} || !$modes{$config{mode}->{val}}->{no_clear_screen};
+ if ( $opts{n} || $prefs->{raw} ) {
+ my $num_lines = 0;
+ my $ts = $opts{t} ? POSIX::strftime($config{timeformat}->{val}, localtime) : '';
+ if ( $opts{t} ) {
+ if ( $opts{t} == 1 ) {
+ print "\n$ts\n\n";
+ $ts = ""; # Prevent it from being written on every line.
+ $num_lines++;
+ }
+ else {
+ $ts .= " ";
+ }
+ }
+ print join("\n",
+ map {
+ $num_lines++;
+ ref $_
+ ? colored($ts . $_->[0], $_->[1])
+ : $ts . $_;
+ }
+ grep { !$opts{n} || $_ } # Suppress empty lines
+ @$display_lines);
+ if ( $opts{n} && $num_lines ) {
+ print "\n";
+ }
+ }
+ else {
+ my $max_lines = $prefs->{show_all}
+ ? scalar(@$display_lines)- 1
+ : min(scalar(@$display_lines), $this_term_size[1]);
+ print join("\n",
+ map {
+ ref $_
+ ? colored(substr($_->[0], 0, $this_term_size[0]), $_->[1])
+ : substr($_, 0, $this_term_size[0]);
+ } @$display_lines[0..$max_lines - 1]);
+ }
+}
+
+# fuzzy_time {{{3
+sub fuzzy_time {
+ my ( $secs ) = @_;
+ return '' unless $secs;
+ return sprintf('%.2f', $secs) if $secs =~ m/^.\./;
+ $secs =~ s/\..*$//;
+ return $secs < 180 ? "${secs}s"
+ : $secs < 3600 ? sprintf("%dm", $secs / 60)
+ : $secs < 3600 * 3 ? sprintf("%dh%dm", $secs / 3600, ($secs % 3600) / 60)
+ : $secs < 86400 ? sprintf("%dh", $secs / 3600)
+ : $secs < 86400* 3 ? sprintf("%dd%dh", $secs / 86400, ($secs % 86400) / 3600)
+ : sprintf("%dd", $secs / 86400);
+}
+
+sub fuzzy_to_secs {
+ my ($t) = @_;
+ return 0 unless $t;
+ my ($num, $suffix) = $t =~ m/(\d+)([a-z])?$/;
+ return $num unless $suffix;
+ return $suffix eq 's' ? $num # Seconds
+ : $suffix eq 'm' ? $num * 60 # Minutes
+ : $suffix eq 'h' ? $num * 3600 # Hours
+ : $num * 86400; # Days
+}
+
+# distill {{{3
+sub distill {
+ my ( $query ) = @_;
+ return "" unless $query;
+ my $orig_query = $query;
+
+ $query =~ m/\A\s*call\s+(\S+)\(/i && return "CALL $1";
+ $query =~ m/\A\s*use\s+/ && return "USE";
+ $query =~ m/\A\s*UNLOCK TABLES/i && return "UNLOCK";
+ $query =~ m/\A\s*xa\s+(\S+)/i && return "XA_$1";
+
+ # Strip out comments
+ my $olc_re = qr/(?:--|#)[^'"\r\n]*(?=[\r\n]|\Z)/; # One-line comments
+ my $mlc_re = qr#/\*[^!].*?\*/#sm; # But not /*!version */
+ my $vlc_re = qr#/\*.*?[0-9+].*?\*/#sm; # For SHOW + /*!version */
+ my $vlc_rf = qr#^(SHOW).*?/\*![0-9+].*?\*/#sm; # Variation for SHOW
+ $query =~ s/$olc_re//go;
+ $query =~ s/$mlc_re//go;
+ if ( $query =~ m/$vlc_rf/i ) { # contains show + version
+ $query =~ s/$vlc_re//go;
+ }
+
+ # Handle SHOW queries
+ if ( $query =~ m/\A\s*SHOW\s+/i ) {
+ $query = uc $query;
+ $query =~ s/\s+(?:GLOBAL|SESSION|FULL|STORAGE|ENGINE)\b/ /g;
+ $query =~ s/\s+COUNT[^)]+\)//g;
+ $query =~ s/\s+(?:FOR|FROM|LIKE|WHERE|LIMIT|IN)\b.+//ms;
+ $query =~ s/\A(SHOW(?:\s+\S+){1,2}).*\Z/$1/s;
+ $query =~ s/\s+/ /g;
+ }
+
+ # Find verbs and tables.
+ my ($verbs, $table);
+
+ # Handle DDL operations (dds)
+ my $tbl_ident = qr/(?:`[^`]+`|\w+)(?:\.(?:`[^`]+`|\w+))?/;
+ my $tbl_regex = qr{
+ \b(?:FROM|JOIN|(?<!KEY\s)UPDATE|INTO(?!\s+TABLE)|INTO\s+TABLE) # Words that precede table names
+ \b\s*
+ \(? # Optional paren around tables
+ ($tbl_ident
+ (?: (?:\s+ (?:AS\s+)? \w+)?, \s*$tbl_ident )*
+ )
+ }xio;
+ my ( $ddl ) = $query =~ m/^\s*((?:CREATE|ALTER|TRUNCATE|DROP|RENAME|CHECK|REPAIR))\b/i;
+ if ( $ddl ) {
+ my ( $obj ) = $query =~ m/$ddl.+(DATABASE|EVENT|FUNCTION|INDEX|LOGFILE GROUP|PROCEDURE|SERVER|TABLE|TABLESPACE|TRIGGER|VIEW)\b/i;
+ if ( $obj ) {
+ $query =~ s/$obj\s*if\s*(?:not\s*)?exists/$obj/i;
+ $verbs = uc($ddl . ($obj ? " $obj" : ''));
+ ($table) = $query =~ m/(?:TABLE|DATABASE)\s+($tbl_ident)(\s+.*)?/i;
+ }
+ }
+ else {
+ my $verbs_pat = qr{^SHOW|^FLUSH|^COMMIT|^ROLLBACK|^BEGIN|SELECT|INSERT
+ |UPDATE|DELETE|REPLACE|^SET|UNION|^START|^LOCK|^LOAD}xi;
+ my @verbs = $query =~ m/\b($verbs_pat)\b/gio;
+ @verbs = do {
+ my $last = '';
+ grep { my $pass = $_ ne $last; $last = $_; $pass } map { uc } @verbs;
+ };
+
+ if ( ($verbs[0] || '') eq 'SELECT' && @verbs > 1 ) {
+ # False-positive verbs after SELECT
+ my $union = grep { $_ eq 'UNION' } @verbs;
+ @verbs = $union ? qw(SELECT UNION) : qw(SELECT);
+ }
+
+ my %seen;
+ $verbs = join(q{ }, grep { !$seen{$_}++ } @verbs);
+ }
+
+ if ( $verbs && $verbs =~ m/^SHOW/ ) {
+ my %alias_for = qw(
+ SCHEMA DATABASE
+ KEYS INDEX
+ INDEXES INDEX
+ );
+ map { $verbs =~ s/$_/$alias_for{$_}/ } keys %alias_for;
+ $query = $verbs;
+ }
+ else {
+ my @tables;
+ $query =~ s/ (?:LOW_PRIORITY|IGNORE|STRAIGHT_JOIN)//ig;
+ if ( $query =~ /^\s*LOCK\s+TABLES/i ) {
+ $query =~ s/^(\s*LOCK\s+TABLES\s+)//i;
+ $query =~ s/\s+(?:READ|WRITE|LOCAL)+\s*//gi;
+ $query = "FROM $query";
+ }
+ $query =~ s/\\["']//g; # quoted strings
+ $query =~ s/".*?"/?/sg; # quoted strings
+ $query =~ s/'.*?'/?/sg; # quoted strings
+
+ foreach my $tbls ( $query =~ m/$tbl_regex/gio ) {
+ next if $tbls =~ m/\ASELECT\b/i;
+ foreach my $tbl ( split(',', $tbls) ) {
+ $tbl =~ s/\s*($tbl_ident)(\s+.*)?/$1/gio;
+ if ( $tbl !~ m/[a-zA-Z]/ ) {
+ # Skip suspicious table name
+ next;
+ }
+ push @tables, $tbl;
+ }
+ }
+
+ # If we have a bunch of tables like db1.tbl1 db1.tbl2, convert to
+ # db1.tbl1 -.tbl2 etc. Also remove repeated tables, and strip `quotes`.
+ $query = $verbs;
+ my $prev = '';
+ foreach my $t ( @tables, $table ) {
+ next unless $t;
+ $t =~ s/`//g;
+ next if $t eq $prev;
+ my ($prefix, undef) = split(/\./, $prev);
+ $prev = $t;
+ if ( $prefix ) {
+ $t =~ s/^$prefix\./-./;
+ }
+ $query .= " " . $t;
+ }
+ }
+
+ # die $orig_query if $query eq 'LOCK lock';
+ return $query;
+}
+
+# secs_to_time {{{3
+sub secs_to_time {
+ my ( $secs, $fmt ) = @_;
+ $secs ||= 0;
+
+ # If the inbound value has a decimal point, then format the seconds with milliseconds.
+ my $hires = $secs =~ m/\./ ? '%06.3f' : '%02d';
+
+ if ( !$secs ) {
+ return sprintf("00:$hires", $secs);
+ }
+
+ # Decide what format to use, if not given
+ $fmt ||= $secs >= 86_400 ? 'd'
+ : $secs >= 3_600 ? 'h'
+ : 'm';
+
+ return
+ $fmt eq 'd' ? sprintf(
+ "%d+%02d:%02d:$hires",
+ int($secs / 86_400),
+ int(($secs % 86_400) / 3_600),
+ int(($secs % 3_600) / 60),
+ $secs % 60 + ($secs - int($secs)))
+ : $fmt eq 'h' ? sprintf(
+ "%02d:%02d:$hires",
+ int(($secs % 86_400) / 3_600),
+ int(($secs % 3_600) / 60),
+ $secs % 60 + ($secs - int($secs)))
+ : sprintf(
+ "%02d:$hires",
+ int(($secs % 3_600) / 60),
+ $secs % 60 + ($secs - int($secs)));
+}
+
+# dulint_to_int {{{3
+# Takes a number that InnoDB formats as two ulint integers, like transaction IDs
+# and such, and turns it into a single integer
+sub dulint_to_int {
+ my $num = shift;
+ return 0 unless $num;
+ my ( $high, $low ) = $num =~ m/^(\d+) (\d+)$/;
+ return $low unless $high;
+ return $low + ( $high * $MAX_ULONG );
+}
+
+# create_statusbar {{{3
+sub create_statusbar {
+ my $mode = $config{mode}->{val};
+ my @cxns = sort { $a cmp $b } get_connections();
+
+ my $modeline = ( $config{readonly}->{val} ? '[RO] ' : '' )
+ . $modes{$mode}->{hdr} . " (? for help)";
+ my $mode_width = length($modeline);
+ my $remaining_width = $this_term_size[0] - $mode_width - 1;
+ my $result;
+
+ # The thingie in top-right that says what we're monitoring.
+ my $cxn = '';
+
+ if ( 1 == @cxns && $dbhs{$cxns[0]} && $dbhs{$cxns[0]}->{dbh} ) {
+ $cxn = $dbhs{$cxns[0]}->{dbh}->{mariadb_serverinfo} || '';
+ }
+ else {
+ if ( $modes{$mode}->{server_group} ) {
+ $cxn = "Servers: " . $modes{$mode}->{server_group};
+ my $err_count = grep { $dbhs{$_} && $dbhs{$_}->{failed} } @cxns;
+ if ( $err_count ) {
+ $cxn .= "(" . ( scalar(@cxns) - $err_count ) . "/" . scalar(@cxns) . ")";
+ }
+ }
+ else {
+ $cxn = join(' ', map { ($dbhs{$_}->{failed} ? '!' : '') . $_ }
+ grep { $dbhs{$_} } @cxns);
+ }
+ }
+
+ if ( 1 == @cxns ) {
+ get_driver_status(@cxns);
+ my $vars = $vars{$cxns[0]}->{$clock};
+ my $inc = inc(0, $cxns[0]);
+
+ # Format server uptime human-readably, calculate QPS...
+ my $uptime = fuzzy_time( $vars->{Uptime_hires} );
+ my $qps = ($inc->{Questions}||0) / ($inc->{Uptime_hires}||1);
+ my $ibinfo = '';
+
+ if ( exists $vars->{IB_last_secs} ) {
+ $ibinfo .= "InnoDB $vars->{IB_last_secs}s ";
+ if ( $vars->{IB_got_all} ) {
+ if ( ($mode eq 'T' || $mode eq 'W')
+ && $vars->{IB_tx_is_truncated} ) {
+ $ibinfo .= ':^|';
+ }
+ else {
+ $ibinfo .= ':-)';
+ }
+ }
+ else {
+ $ibinfo .= ':-(';
+ }
+ }
+ $result = sprintf(
+ "%-${mode_width}s %${remaining_width}s",
+ $modeline,
+ join(', ', grep { $_ } (
+ $cxns[0],
+ $uptime,
+ $ibinfo,
+ shorten($qps) . " QPS",
+ ($vars->{Threads} || 0) . "/" . ($vars->{Threads_running} || 0) . "/" . ($vars->{Threads_cached} || 0) . " con/run/cac thds",
+ $cxn)));
+ }
+ else {
+ $result = sprintf(
+ "%-${mode_width}s %${remaining_width}s",
+ $modeline,
+ $cxn);
+ }
+
+ return $config{color}->{val} ? [ $result, 'bold reverse' ] : $result;
+}
+
+# Database connections {{{3
+sub add_new_dsn {
+ my ( $name, $dsn, $dl_table, $have_user, $user, $have_pass, $pass, $savepass ) = @_;
+
+ if ( defined $name ) {
+ $name =~ s/[\s:;]//g;
+ }
+
+ if ( !$name ) {
+ print word_wrap("Choose a name for the connection. It cannot contain "
+ . "whitespace, colons or semicolons."), "\n\n";
+ do {
+ $name = prompt("Enter a name");
+ $name =~ s/[\s:;]//g;
+ } until ( $name );
+ }
+
+ if ( !$dsn ) {
+ do {
+ $clear_screen_sub->();
+ print "Typical DSN strings look like\n DBI:MariaDB:;host=hostname;port=port\n"
+ . "The db and port are optional and can usually be omitted.\n"
+ . "If you specify 'mariadb_read_default_group=mysql' many options can be read\n"
+ . "from your mysql options files (~/.my.cnf, /etc/my.cnf).\n\n";
+ $dsn = prompt("Enter a DSN string", undef, "DBI:MariaDB:;mariadb_read_default_group=mysql;host=$name");
+ } until ( $dsn );
+ }
+ if ( !$dl_table ) {
+ $clear_screen_sub->();
+ my $dl_table = prompt("Optional: enter a table (must not exist) to use when resetting InnoDB deadlock information",
+ undef, 'test.innotop_dl');
+ }
+
+ $connections{$name} = {
+ dsn => $dsn,
+ dl_table => $dl_table,
+ have_user => $have_user,
+ user => $user,
+ have_pass => $have_pass,
+ pass => $pass,
+ savepass => $savepass
+ };
+}
+
+sub add_new_server_group {
+ my ( $name ) = @_;
+
+ if ( defined $name ) {
+ $name =~ s/[\s:;]//g;
+ }
+
+ if ( !$name ) {
+ print word_wrap("Choose a name for the group. It cannot contain "
+ . "whitespace, colons or semicolons."), "\n\n";
+ do {
+ $name = prompt("Enter a name");
+ $name =~ s/[\s:;]//g;
+ } until ( $name );
+ }
+
+ my @cxns;
+ do {
+ $clear_screen_sub->();
+ @cxns = select_cxn("Choose servers for $name", keys %connections);
+ } until ( @cxns );
+
+ $server_groups{$name} = \@cxns;
+ return $name;
+}
+
+sub get_var_set {
+ my ( $name ) = @_;
+ while ( !$name || !exists($var_sets{$config{$name}->{val}}) ) {
+ $name = choose_var_set($name);
+ }
+ return $var_sets{$config{$name}->{val}}->{text};
+}
+
+sub add_new_var_set {
+ my ( $name ) = @_;
+
+ if ( defined $name ) {
+ $name =~ s/\W//g;
+ }
+
+ if ( !$name ) {
+ do {
+ $name = prompt("Enter a name");
+ $name =~ s/\W//g;
+ } until ( $name );
+ }
+
+ my $variables;
+ do {
+ $clear_screen_sub->();
+ $variables = prompt("Enter variables for $name", undef );
+ } until ( $variables );
+
+ $var_sets{$name} = { text => $variables, user => 1 };
+}
+
+sub next_server {
+ my $mode = $config{mode}->{val};
+ my @cxns = sort keys %connections;
+ my ($cur) = get_connections($mode);
+ $cur ||= $cxns[0];
+ my $pos = grep { $_ lt $cur } @cxns;
+ my $newpos = ($pos + 1) % @cxns;
+ $modes{$mode}->{server_group} = '';
+ $modes{$mode}->{connections} = [ $cxns[$newpos] ];
+ $clear_screen_sub->();
+}
+
+sub next_server_group {
+ my $mode = shift || $config{mode}->{val};
+ my @grps = sort keys %server_groups;
+ my $curr = $modes{$mode}->{server_group};
+
+ return unless @grps;
+
+ if ( $curr ) {
+ # Find the current group's position.
+ my $pos = 0;
+ while ( $curr ne $grps[$pos] ) {
+ $pos++;
+ }
+ $modes{$mode}->{server_group} = $grps[ ($pos + 1) % @grps ];
+ }
+ else {
+ $modes{$mode}->{server_group} = $grps[0];
+ }
+}
+
+# Get a list of connection names used in this mode.
+sub get_connections {
+ if ( $file ) {
+ return qw(file);
+ }
+ my $mode = shift || $config{mode}->{val};
+ my @connections = $modes{$mode}->{server_group}
+ ? @{$server_groups{$modes{$mode}->{server_group}}}
+ : @{$modes{$mode}->{connections}};
+ if ( $modes{$mode}->{one_connection} ) {
+ @connections = @connections ? $connections[0] : ();
+ }
+ # If the connections are the same as a server group, we set the mode's
+ # group to that group.
+ if ( ! $modes{$mode}->{server_group} ) {
+ my $maybe_group = join(',', sort @connections);
+ foreach my $g ( keys %server_groups ) {
+ my $group_conns = join(',', sort @{$server_groups{$g}});
+ if ( $maybe_group eq $group_conns ) {
+ $modes{$mode}->{server_group} = $g;
+ last;
+ }
+ }
+ }
+ return unique(@connections);
+}
+
+# Get a list of tables used in this mode. If innotop is running non-interactively, just use the first.
+sub get_visible_tables {
+ my $mode = shift || $config{mode}->{val};
+ my @tbls = @{$modes{$mode}->{visible_tables}};
+ if ( $opts{n} ) {
+ return $tbls[0];
+ }
+ else {
+ return @tbls;
+ }
+}
+
+# Choose from among available connections or server groups.
+# If the mode has a server set in use, prefers that instead.
+sub choose_connections {
+ $clear_screen_sub->();
+ my $mode = $config{mode}->{val};
+ my $meta = { map { $_ => $connections{$_}->{dsn} } keys %connections };
+ foreach my $group ( keys %server_groups ) {
+ $meta->{"#$group"} = join(' ', @{$server_groups{$group}});
+ }
+
+ my $choices = prompt_list("Choose connections or a group for $mode mode",
+ undef, sub { return keys %$meta }, $meta);
+
+ my @choices = unique(grep { $_ } $choices =~ m/(\S+)/g);
+ if ( @choices ) {
+ if ( $choices[0] =~ s/^#// && exists $server_groups{$choices[0]} ) {
+ $modes{$mode}->{server_group} = $choices[0];
+ }
+ else {
+ $modes{$mode}->{connections} = [ grep { exists $connections{$_} } @choices ];
+ }
+ }
+}
+
+# Accepts a DB connection name and the name of a prepared query (e.g. status, kill).
+# Also a list of params for the prepared query. This allows not storing prepared
+# statements globally. Returns a $sth that's been executed.
+# ERROR-HANDLING SEMANTICS: if the statement throws an error, propagate, but if the
+# connection has gone away or can't connect, DO NOT. Just return undef.
+sub do_stmt {
+ my ( $cxn, $stmt_name, @args ) = @_;
+
+ return if $file;
+
+ # Test if the cxn should not even be tried
+ return if $dbhs{$cxn}
+ && $dbhs{$cxn}->{failed}
+ && ( !$dbhs{$cxn}->{dbh} || !$dbhs{$cxn}->{dbh}->{Active} || $dbhs{$cxn}->{mode} eq $config{mode}->{val} );
+
+ my $sth;
+ my $retries = 1;
+ my $success = 0;
+ TRY:
+ while ( $retries-- >= 0 && !$success ) {
+
+ eval {
+ my $dbh = connect_to_db($cxn);
+
+ # If the prepared query doesn't exist, make it.
+ if ( !exists $dbhs{$cxn}->{stmts}->{$stmt_name} ) {
+ $dbhs{$cxn}->{stmts}->{$stmt_name} = $stmt_maker_for{$stmt_name}->($dbh);
+ }
+
+ $sth = $dbhs{$cxn}->{stmts}->{$stmt_name};
+ if ( $sth ) {
+ $sth->execute(@args);
+ }
+ $success = 1;
+ };
+ if ( $EVAL_ERROR ) {
+ if ( $EVAL_ERROR =~ m/$nonfatal_errs/ ) {
+ handle_cxn_error($cxn, $EVAL_ERROR);
+ }
+ else {
+ die "$cxn $stmt_name: $EVAL_ERROR";
+ }
+ if ( $retries < 0 ) {
+ $sth = undef;
+ }
+ }
+ }
+
+ if ( $sth && $sth->{NUM_OF_FIELDS} ) {
+ sleep($stmt_sleep_time_for{$stmt_name}) if $stmt_sleep_time_for{$stmt_name};
+ return $sth;
+ }
+}
+
+# Marks a connection as failed. When we sleep between redraws, we try to
+# reopen.
+sub handle_cxn_error {
+ my ( $cxn, $err ) = @_;
+ my $meta = $dbhs{$cxn};
+ $meta->{failed} = 1;
+
+ # This is used so errors that have to do with permissions needed by the current
+ # mode will get displayed as long as we're in this mode, but get ignored if the
+ # mode changes.
+ $meta->{mode} = $config{mode}->{val};
+
+ # Strip garbage from the error text if possible.
+ $err =~ s/\s+/ /g;
+ if ( $err =~ m/failed: (.*?) at \S*innotop line/ ) {
+ $err = $1;
+ }
+
+ $meta->{last_err} = $err;
+ if ( $config{show_cxn_errors}->{val} ) {
+ print STDERR "DB error: $cxn $err" if $config{debug}->{val};
+ }
+}
+
+# Accepts a DB connection name and a (string) query. Returns a $sth that's been
+# executed.
+sub do_query {
+ my ( $cxn, $query ) = @_;
+
+ return if $file;
+
+ # Test if the cxn should not even be tried
+ return if $dbhs{$cxn}
+ && $dbhs{$cxn}->{failed}
+ && ( !$dbhs{$cxn}->{dbh} || !$dbhs{$cxn}->{dbh}->{Active} || $dbhs{$cxn}->{mode} eq $config{mode}->{val} );
+
+ my $sth;
+ my $retries = 1;
+ my $success = 0;
+ TRY:
+ while ( $retries-- >= 0 && !$success ) {
+
+ eval {
+ my $dbh = connect_to_db($cxn);
+
+ $sth = $dbh->prepare($query);
+ $sth->execute();
+ $success = 1;
+ };
+ if ( $EVAL_ERROR ) {
+ if ( $EVAL_ERROR =~ m/$nonfatal_errs/ ) {
+ handle_cxn_error($cxn, $EVAL_ERROR);
+ }
+ else {
+ die $EVAL_ERROR;
+ }
+ if ( $retries < 0 ) {
+ $sth = undef;
+ }
+ }
+ }
+
+ return $sth;
+}
+
+sub get_uptime {
+ my ( $cxn ) = @_;
+ $dbhs{$cxn}->{start_time} ||= time();
+ # Avoid dividing by zero
+ return (time() - $dbhs{$cxn}->{start_time}) || .001;
+}
+
+sub connect_to_db {
+ my ( $cxn ) = @_;
+
+ $dbhs{$cxn} ||= {
+ stmts => {}, # bucket for prepared statements.
+ start_time => 0,
+ dbh => undef,
+ };
+ my $href = $dbhs{$cxn};
+
+ if ( !$href->{dbh} || ref($href->{dbh}) !~ m/DBI/ || !$href->{dbh}->ping ) {
+ my $dbh = get_new_db_connection($cxn);
+ @{$href}{qw(dbh failed start_time stmts)} = ($dbh, 0, 0, {});
+
+ # Derive and store the server's start time in hi-res
+ my $uptime = $dbh->selectrow_hashref("show status like 'Uptime'")->{value};
+ $href->{start_time} = time() - $uptime;
+
+ # Set timeouts so an unused connection stays alive.
+ # For example, a connection might be used in Q mode but idle in T mode.
+ if ( version_ge($dbh, '4.0.3')) {
+ my $timeout = $config{cxn_timeout}->{val};
+ $dbh->do("set session wait_timeout=$timeout, interactive_timeout=$timeout");
+ }
+ }
+ return $href->{dbh};
+}
+
+# Compares versions like 5.0.27 and 4.1.15-standard-log
+sub version_ge {
+ my ( $dbh, $target ) = @_;
+ my $version = sprintf('%03d%03d%03d', $dbh->{mariadb_serverinfo} =~ m/^(\d+).(\d+).(\d+)/g);
+ return $version ge sprintf('%03d%03d%03d', $target =~ m/(\d+)/g);
+}
+
+# Extracts status values that can be gleaned from the DBD driver without doing a whole query.
+sub get_driver_status {
+ my @cxns = @_;
+ if ( !$info_gotten{driver_status}++ ) {
+ foreach my $cxn ( @cxns ) {
+ next unless $dbhs{$cxn} && $dbhs{$cxn}->{dbh} && $dbhs{$cxn}->{dbh}->{Active};
+ $vars{$cxn}->{$clock} ||= {};
+ my $vars = $vars{$cxn}->{$clock};
+ my %res = map { $_ =~ s/ +/_/g; $_ } $dbhs{$cxn}->{dbh}->{mariadb_stat} =~ m/(\w[^:]+): ([\d\.]+)/g;
+ map { $vars->{$_} ||= $res{$_} } keys %res;
+ $vars->{Uptime_hires} ||= get_uptime($cxn);
+ $vars->{cxn} = $cxn;
+ }
+ }
+}
+
+sub get_new_db_connection {
+ my ( $connection, $destroy ) = @_;
+ if ( $file ) {
+ die "You can't connect to a MariaDB server while monitoring a file. This is probably a bug.";
+ }
+
+ my $dsn = $connections{$connection}
+ or die "No connection named '$connection' is defined in your configuration";
+
+ # don't ask for a username if mariadb_read_default_group=client is in the DSN
+ if ( !defined $dsn->{have_user} and $dsn->{dsn} !~ /mariadb_read_default_group=client/ ) {
+ my $answer = prompt("Do you want to specify a username for $connection?", undef, 'n');
+ $dsn->{have_user} = $answer && $answer =~ m/1|y/i;
+ }
+
+ # don't ask for a password if mariadb_read_default_group=client is in the DSN
+ if ( !defined $dsn->{have_pass} and $dsn->{dsn} !~ /mariadb_read_default_group=client/ ) {
+ my $answer = prompt("Do you want to specify a password for $connection?", undef, 'n');
+ $dsn->{have_pass} = $answer && $answer =~ m/1|y/i;
+ }
+
+ if ( !$dsn->{user} && $dsn->{have_user} ) {
+ my $user = $ENV{USERNAME} || $ENV{USER} || getlogin() || getpwuid($REAL_USER_ID) || undef;
+ $dsn->{user} = prompt("Enter username for $connection", undef, $user);
+ }
+
+ if ( !defined $dsn->{user} ) {
+ $dsn->{user} = '';
+ }
+
+ if ( !$dsn->{pass} && !$dsn->{savepass} && $dsn->{have_pass} ) {
+ $dsn->{pass} = prompt_noecho("Enter password for '$dsn->{user}' on $connection");
+ print "\n";
+ if ( !defined($dsn->{savepass}) ) {
+ my $answer = prompt("Save password in plain text in the config file?", undef, 'y');
+ $dsn->{savepass} = $answer && $answer =~ m/1|y/i;
+ }
+ }
+
+ my $dbh = DBI->connect(
+ $dsn->{dsn}, $dsn->{user}, $dsn->{pass},
+ { RaiseError => 1, PrintError => 0, AutoCommit => 1 });
+ $dbh->{InactiveDestroy} = 1 unless $destroy; # Can't be set in $db_options
+ $dbh->{FetchHashKeyName} = 'NAME_lc'; # Lowercases all column names for fetchrow_hashref
+ return $dbh;
+}
+
+sub get_cxn_errors {
+ my @cxns = @_;
+ return () unless $config{show_cxn_errors_in_tbl}->{val};
+ return
+ map { [ $_ . ': ' . $dbhs{$_}->{last_err}, 'red' ] }
+ grep { $dbhs{$_} && $dbhs{$_}->{failed} && $dbhs{$_}->{mode} eq $config{mode}->{val} }
+ @cxns;
+}
+
+# Setup and tear-down functions {{{2
+
+# Takes a string and turns it into a hashref you can apply to %tbl_meta tables. The string
+# can be in the form 'foo, bar, foo/bar, foo as bar' much like a SQL SELECT statement.
+sub compile_select_stmt {
+ my ($str) = @_;
+ my @exps = $str =~ m/\s*([^,]+(?i:\s+as\s+[^,\s]+)?)\s*(?=,|$)/g;
+ my %cols;
+ my @visible;
+ foreach my $exp ( @exps ) {
+ my ( $text, $colname );
+ if ( $exp =~ m/as\s+(\w+)\s*/ ) {
+ $colname = $1;
+ $exp =~ s/as\s+(\w+)\s*//;
+ $text = $exp;
+ }
+ else {
+ $text = $colname = $exp;
+ }
+ my ($func, $err) = compile_expr($text);
+ $cols{$colname} = {
+ src => $text,
+ hdr => $colname,
+ num => 0,
+ func => $func,
+ };
+ push @visible, $colname;
+ }
+ return (\%cols, \@visible);
+}
+
+# compile_filter {{{3
+sub compile_filter {
+ my ( $text ) = @_;
+ my ( $sub, $err );
+ eval { $sub = sub { my $set = shift; $text } };
+ if ( $EVAL_ERROR ) {
+ $EVAL_ERROR =~ s/at \(eval.*$//;
+ $sub = sub { return $EVAL_ERROR };
+ $err = $EVAL_ERROR;
+ }
+ return ( $sub, $err );
+}
+
+# compile_expr {{{3
+sub compile_expr {
+ my ( $expr ) = @_;
+ # Leave built-in functions alone so they get called as Perl functions, unless
+ # they are the only word in $expr, in which case treat them as hash keys.
+ if ( $expr =~ m/\W/ ) {
+ $expr =~ s/(?<!\{|\$)\b([A-Za-z]\w{2,})\b/is_func($1) ? $1 : "\$set->{$1}"/eg;
+ }
+ else {
+ $expr = "\$set->{$expr}";
+ }
+ my ( $sub, $err );
+ my $quoted = quotemeta($expr);
+ eval qq{
+ \$sub = sub {
+ my (\$set, \$cur, \$pre) = \@_;
+ my \$val = eval { $expr };
+ if ( \$EVAL_ERROR && \$config{debug}->{val} ) {
+ \$EVAL_ERROR =~ s/ at \\(eval.*//s;
+ die "\$EVAL_ERROR in expression $quoted";
+ }
+ return \$val;
+ }
+ };
+ if ( $EVAL_ERROR ) {
+ if ( $config{debug}->{val} ) {
+ die $EVAL_ERROR;
+ }
+ $EVAL_ERROR =~ s/ at \(eval.*$//;
+ $sub = sub { return $EVAL_ERROR };
+ $err = $EVAL_ERROR;
+ }
+ return ( $sub, $err );
+}
+
+# finish {{{3
+# This is a subroutine because it's called from a key to quit the program.
+sub finish {
+ save_config();
+ foreach my $cxn ( values %dbhs ) {
+ eval {
+ foreach my $sth ( values %{$cxn->{stmts}} ) {
+ $sth->finish;
+ }
+ $cxn->{dbh}->disconnect;
+ };
+ # Ignore eval errors, we just don't care
+ }
+ ReadMode('normal') unless $opts{n};
+ print "\n";
+ exit(0);
+}
+
+# core_dump {{{3
+sub core_dump {
+ my $msg = shift;
+ if ($config{debugfile}->{val} && $config{debug}->{val}) {
+ eval {
+ open my $file, '>>', $config{debugfile}->{val};
+ if ( %vars ) {
+ print $file "Current variables:\n" . Dumper(\%vars);
+ }
+ close $file;
+ };
+ }
+ print $msg;
+}
+
+# migrate_config {{{3
+sub migrate_config {
+
+ my ($old_filename, $new_filename) = @_;
+
+ # don't proceed if old file doesn't exist
+ if ( ! -f $old_filename ) {
+ die "Error migrating '$old_filename': file doesn't exist.\n";
+ }
+ # don't migrate files if new file exists
+ elsif ( -f $new_filename ) {
+ die "Error migrating '$old_filename' to '$new_filename': new file already exists.\n";
+ }
+ # if migrating from one file to another in the same directory, just rename them
+ if (dirname($old_filename) eq dirname($new_filename)) {
+ rename($old_filename, $new_filename)
+ or die "Can't rename '$old_filename' to '$new_filename': $OS_ERROR";
+ }
+ # otherwise, move the existing conf file to a temp file, make the necessary directory structure,
+ # and move the temp conf file to its new home
+ else {
+ my $tmp = File::Temp->new( TEMPLATE => 'innotopXXXXX', DIR => $homepath, SUFFIX => '.conf');
+ my $tmp_filename = $tmp->filename;
+ my $dirname = dirname($new_filename);
+ rename($old_filename, $tmp_filename)
+ or die "Can't rename '$old_filename' to '$tmp_filename': $OS_ERROR";
+ mkdir($dirname) or die "Can't create directory '$dirname': $OS_ERROR";
+ mkdir("$dirname/plugins") or die "Can't create directory '$dirname/plugins': $OS_ERROR";
+ rename($tmp_filename, $new_filename)
+ or die "Can't rename '$tmp_filename' to '$new_filename': $OS_ERROR";
+ }
+}
+
+# load_config {{{3
+sub load_config {
+
+ my ($old_filename, $answer);
+
+ if ( $opts{u} or $opts{p} or $opts{h} or $opts{P} or $opts{S} ) {
+ my @params = $dsn_parser->get_cxn_params(\%opts); # dsn=$params[0]
+ add_new_dsn($opts{h} || 'localhost', $params[0], 'test.innotop_dl',
+ $opts{u} ? 1 : 0, $opts{u}, $opts{p} ? 1 : 0, $opts{p});
+ }
+ if ($opts{c}) {
+ $conf_file = $opts{c};
+ }
+ # If we don't have a new config file but we do have an old one,
+ # innotop got upgraded and this is an old config file. Convert it, but
+ # don't overwrite something existing.
+ elsif ( ! -f $default_home_conf && ( -f "$homepath/.innotop" or -f "$homepath/.innotop/innotop.ini" ) ) {
+ $conf_file = $default_home_conf;
+ if ( -f "$homepath/.innotop") {
+ $old_filename = "$homepath/.innotop";
+ }
+ elsif ( -f "$homepath/.innotop/innotop.ini" ) {
+ $old_filename = "$homepath/.innotop/innotop.ini";
+ }
+ $answer = pause("Innotop's default config location has moved to '$conf_file'. Move old config file '$old_filename' there now? y/n");
+ if ( lc $answer eq 'y' ) {
+ migrate_config($old_filename, $conf_file);
+ }
+ else {
+ print "\nInnotop will now exit so you can fix the config file.\n";
+ exit(0);
+ }
+ }
+ elsif ( -f $default_home_conf ) {
+ $conf_file = $default_home_conf;
+ }
+ elsif ( -f $default_central_conf and not $opts{s} ) {
+ $conf_file = $default_central_conf;
+ }
+ else {
+ # If no config file was loaded, set readonly to 0 if the user wants to
+ # write a config
+ $config{readonly}->{val} = 0 if $opts{w};
+ # If no connections have been defined, connect to a MySQL database
+ # on localhost using mariadb_read_default_group=client
+ if (!%connections) {
+ add_new_dsn('localhost',
+ 'DBI:MariaDB:;host=localhost;mariadb_read_default_group=client',
+ 'test.innotop_dl');
+ }
+ }
+
+ if ( -f "$conf_file" ) {
+ open my $file, "<", $conf_file or die("Can't open '$conf_file': $OS_ERROR");
+
+ # Check config file version. Just ignore if either innotop or the file has
+ # garbage in the version number.
+ if ( defined(my $line = <$file>) && $VERSION =~ m/\d/ ) {
+ chomp $line;
+ if ( my ($maj, $min, $rev) = $line =~ m/^version=(\d+)\.(\d+)(?:\.(\d+))?$/ ) {
+ $rev ||= 0;
+ my $cfg_ver = sprintf('%03d-%03d-%03d', $maj, $min, $rev);
+ ( $maj, $min, $rev ) = $VERSION =~ m/^(\d+)\.(\d+)(?:\.(\d+))?$/;
+ $rev ||= 0;
+ my $innotop_ver = sprintf('%03d-%03d-%03d', $maj, $min, $rev);
+
+ if ( $cfg_ver gt $innotop_ver ) {
+ pause("The config file is for a newer version of innotop and may not be read correctly.");
+ }
+ else {
+ my @ver_history = @config_versions;
+ while ( my ($start, $end) = splice(@ver_history, 0, 2) ) {
+ # If the config file is between the endpoints and innotop is greater than
+ # the endpoint, innotop has a newer config file format than the file.
+ if ( $cfg_ver ge $start && $cfg_ver lt $end && $innotop_ver ge $end ) {
+ my $msg = "innotop's config file format has changed. Overwrite $conf_file? y or n";
+ if ( pause($msg) eq 'n' ) {
+ $config{readonly}->{val} = 1;
+ print "\ninnotop will not save any configuration changes you make.";
+ pause();
+ print "\n";
+ }
+ close $file;
+ return;
+ }
+ }
+ }
+ }
+ }
+
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next unless $line =~ m/^\[([a-z_]+)\]$/;
+ if ( exists $config_file_sections{$1} ) {
+ $config_file_sections{$1}->{reader}->($file);
+ }
+ else {
+ warn "Unknown config file section '$1'";
+ }
+ }
+ close $file or die("Can't close $conf_file: $OS_ERROR");
+ }
+
+}
+
+# Do some post-processing on %tbl_meta: compile src properties into func etc.
+sub post_process_tbl_meta {
+ foreach my $table ( values %tbl_meta ) {
+ foreach my $col_name ( keys %{$table->{cols}} ) {
+ my $col_def = $table->{cols}->{$col_name};
+ my ( $sub, $err ) = compile_expr($col_def->{src});
+ $col_def->{func} = $sub;
+ }
+ }
+}
+
+# load_config_plugins {{{3
+sub load_config_plugins {
+ my ( $file ) = @_;
+
+ # First, find a list of all plugins that exist on disk, and get information about them.
+ my $dir = $config{plugin_dir}->{val};
+ foreach my $p_file (glob($dir."/*.pm")) {
+ my ($package, $desc);
+ eval {
+ open my $p_in, "<", $p_file or die $OS_ERROR;
+ while ( my $line = <$p_in> ) {
+ chomp $line;
+ if ( $line =~ m/^package\s+(.*?);/ ) {
+ $package = $1;
+ }
+ elsif ( $line =~ m/^# description: (.*)/ ) {
+ $desc = $1;
+ }
+ last if $package && $desc;
+ }
+ close $p_in;
+ };
+ if ( $package ) {
+ $plugins{$package} = {
+ file => $p_file,
+ desc => $desc,
+ class => $package,
+ active => 0,
+ };
+ if ( $config{debug}->{val} && $EVAL_ERROR ) {
+ die $EVAL_ERROR;
+ }
+ }
+ }
+
+ # Now read which ones the user has activated. Each line simply represents an active plugin.
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+ next unless $line && $plugins{$line};
+
+ my $obj;
+ eval {
+ require $plugins{$line}->{file};
+ $obj = $line->new(%pluggable_vars);
+ foreach my $event ( $obj->register_for_events() ) {
+ my $queue = $event_listener_for{$event};
+ if ( $queue ) {
+ push @$queue, $obj;
+ }
+ }
+ };
+ if ( $config{debug}->{val} && $EVAL_ERROR ) {
+ die $EVAL_ERROR;
+ }
+ if ( $obj ) {
+ $plugins{$line}->{active} = 1;
+ $plugins{$line}->{object} = $obj;
+ }
+ }
+}
+
+# save_config_plugins {{{3
+sub save_config_plugins {
+ my $file = shift;
+ foreach my $class ( sort keys %plugins ) {
+ next unless $plugins{$class}->{active};
+ print $file "$class\n";
+ }
+}
+
+# load_config_active_server_groups {{{3
+sub load_config_active_server_groups {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $mode, $group ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $mode && $group
+ && exists $modes{$mode} && exists $server_groups{$group};
+ $modes{$mode}->{server_group} = $group;
+ }
+}
+
+# save_config_active_server_groups {{{3
+sub save_config_active_server_groups {
+ my $file = shift;
+ foreach my $mode ( sort keys %modes ) {
+ print $file "$mode=$modes{$mode}->{server_group}\n";
+ }
+}
+
+# load_config_server_groups {{{3
+sub load_config_server_groups {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $name, $rest ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $name && $rest;
+ my @vars = unique(grep { $_ && exists $connections{$_} } split(/\s+/, $rest));
+ next unless @vars;
+ $server_groups{$name} = \@vars;
+ }
+}
+
+# save_config_server_groups {{{3
+sub save_config_server_groups {
+ my $file = shift;
+ foreach my $set ( sort keys %server_groups ) {
+ print $file "$set=", join(' ', @{$server_groups{$set}}), "\n";
+ }
+}
+
+# load_config_varsets {{{3
+sub load_config_varsets {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $name, $rest ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $name && $rest;
+ $var_sets{$name} = {
+ text => $rest,
+ user => 1,
+ };
+ }
+}
+
+# save_config_varsets {{{3
+sub save_config_varsets {
+ my $file = shift;
+ foreach my $varset ( sort keys %var_sets ) {
+ next unless $var_sets{$varset}->{user};
+ print $file "$varset=$var_sets{$varset}->{text}\n";
+ }
+}
+
+# load_config_group_by {{{3
+sub load_config_group_by {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $tbl , $rest ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $tbl && exists $tbl_meta{$tbl};
+ my @parts = unique(grep { exists($tbl_meta{$tbl}->{cols}->{$_}) } split(/\s+/, $rest));
+ $tbl_meta{$tbl}->{group_by} = [ @parts ];
+ $tbl_meta{$tbl}->{cust}->{group_by} = 1;
+ }
+}
+
+# save_config_group_by {{{3
+sub save_config_group_by {
+ my $file = shift;
+ foreach my $tbl ( sort keys %tbl_meta ) {
+ next if $tbl_meta{$tbl}->{temp};
+ next unless $tbl_meta{$tbl}->{cust}->{group_by};
+ my $aref = $tbl_meta{$tbl}->{group_by};
+ print $file "$tbl=", join(' ', @$aref), "\n";
+ }
+}
+
+# load_config_filters {{{3
+sub load_config_filters {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $key, $rest ) = $line =~ m/^(.+?)=(.*)$/;
+ next unless $key && $rest;
+
+ my %parts = $rest =~ m/(\w+)='((?:(?!(?<!\\)').)*)'/g; # Properties are single-quoted
+ next unless $parts{text} && $parts{tbls};
+
+ foreach my $prop ( keys %parts ) {
+ # Un-escape escaping
+ $parts{$prop} =~ s/\\\\/\\/g;
+ $parts{$prop} =~ s/\\'/'/g;
+ }
+
+ my ( $sub, $err ) = compile_filter($parts{text});
+ my @tbls = unique(split(/\s+/, $parts{tbls}));
+ @tbls = grep { exists $tbl_meta{$_} } @tbls;
+ $filters{$key} = {
+ func => $sub,
+ text => $parts{text},
+ user => 1,
+ name => $key,
+ note => 'User-defined filter',
+ tbls => \@tbls,
+ }
+ }
+}
+
+# save_config_filters {{{3
+sub save_config_filters {
+ my $file = shift;
+ foreach my $key ( sort keys %filters ) {
+ next if !$filters{$key}->{user} || $filters{$key}->{quick};
+ my $text = $filters{$key}->{text};
+ $text =~ s/([\\'])/\\$1/g;
+ my $tbls = join(" ", @{$filters{$key}->{tbls}});
+ print $file "$key=text='$text' tbls='$tbls'\n";
+ }
+}
+
+# load_config_visible_tables {{{3
+sub load_config_visible_tables {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $mode, $rest ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $mode && exists $modes{$mode};
+ $modes{$mode}->{visible_tables} =
+ [ unique(grep { $_ && exists $tbl_meta{$_} } split(/\s+/, $rest)) ];
+ $modes{$mode}->{cust}->{visible_tables} = 1;
+ }
+}
+
+# save_config_visible_tables {{{3
+sub save_config_visible_tables {
+ my $file = shift;
+ foreach my $mode ( sort keys %modes ) {
+ next unless $modes{$mode}->{cust}->{visible_tables};
+ my $tables = $modes{$mode}->{visible_tables};
+ print $file "$mode=", join(' ', @$tables), "\n";
+ }
+}
+
+# load_config_sort_cols {{{3
+sub load_config_sort_cols {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $key , $rest ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $key && exists $tbl_meta{$key};
+ $tbl_meta{$key}->{sort_cols} = $rest;
+ $tbl_meta{$key}->{cust}->{sort_cols} = 1;
+ $tbl_meta{$key}->{sort_func} = make_sort_func($tbl_meta{$key});
+ }
+}
+
+# save_config_sort_cols {{{3
+sub save_config_sort_cols {
+ my $file = shift;
+ foreach my $tbl ( sort keys %tbl_meta ) {
+ next unless $tbl_meta{$tbl}->{cust}->{sort_cols};
+ my $col = $tbl_meta{$tbl}->{sort_cols};
+ print $file "$tbl=$col\n";
+ }
+}
+
+# load_config_active_filters {{{3
+sub load_config_active_filters {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $tbl , $rest ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $tbl && exists $tbl_meta{$tbl};
+ my @parts = unique(grep { exists($filters{$_}) } split(/\s+/, $rest));
+ @parts = grep { grep { $tbl eq $_ } @{$filters{$_}->{tbls}} } @parts;
+ $tbl_meta{$tbl}->{filters} = [ @parts ];
+ $tbl_meta{$tbl}->{cust}->{filters} = 1;
+ }
+}
+
+# save_config_active_filters {{{3
+sub save_config_active_filters {
+ my $file = shift;
+ foreach my $tbl ( sort keys %tbl_meta ) {
+ next if $tbl_meta{$tbl}->{temp};
+ next unless $tbl_meta{$tbl}->{cust}->{filters};
+ my $aref = $tbl_meta{$tbl}->{filters};
+ print $file "$tbl=", join(' ', @$aref), "\n";
+ }
+}
+
+# load_config_active_columns {{{3
+sub load_config_active_columns {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $key , $rest ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $key && exists $tbl_meta{$key};
+ my @parts = grep { exists($tbl_meta{$key}->{cols}->{$_}) } unique split(/ /, $rest);
+ $tbl_meta{$key}->{visible} = [ @parts ];
+ $tbl_meta{$key}->{cust}->{visible} = 1;
+ }
+}
+
+# save_config_active_columns {{{3
+sub save_config_active_columns {
+ my $file = shift;
+ foreach my $tbl ( sort keys %tbl_meta ) {
+ next unless $tbl_meta{$tbl}->{cust}->{visible};
+ my $aref = $tbl_meta{$tbl}->{visible};
+ print $file "$tbl=", join(' ', @$aref), "\n";
+ }
+}
+
+# save_config_tbl_meta {{{3
+sub save_config_tbl_meta {
+ my $file = shift;
+ foreach my $tbl ( sort keys %tbl_meta ) {
+ foreach my $col ( keys %{$tbl_meta{$tbl}->{cols}} ) {
+ my $meta = $tbl_meta{$tbl}->{cols}->{$col};
+ next unless $meta->{user};
+ print $file "$col=", join(
+ " ",
+ map {
+ # Some properties (trans) are arrays, others scalars
+ my $val = ref($meta->{$_}) ? join(',', @{$meta->{$_}}) : $meta->{$_};
+ $val =~ s/([\\'])/\\$1/g; # Escape backslashes and single quotes
+ "$_='$val'"; # Enclose in single quotes
+ }
+ grep { $_ ne 'func' }
+ keys %$meta
+ ), "\n";
+ }
+ }
+}
+
+# save_config_config {{{3
+sub save_config_config {
+ my $file = shift;
+ foreach my $key ( sort keys %config ) {
+ eval {
+ if ( $key ne 'password' || $config{savepass}->{val} ) {
+ print $file "# $config{$key}->{note}\n"
+ or die "Cannot print to file: $OS_ERROR";
+ my $val = $config{$key}->{val};
+ $val = '' unless defined($val);
+ if ( ref( $val ) eq 'ARRAY' ) {
+ print $file "$key="
+ . join( " ", @$val ) . "\n"
+ or die "Cannot print to file: $OS_ERROR";
+ }
+ elsif ( ref( $val ) eq 'HASH' ) {
+ print $file "$key="
+ . join( " ",
+ map { "$_:$val->{$_}" } keys %$val
+ ) . "\n";
+ }
+ else {
+ print $file "$key=$val\n";
+ }
+ }
+ };
+ if ( $EVAL_ERROR ) { print "$EVAL_ERROR in $key"; };
+ }
+
+}
+
+# load_config_config {{{3
+sub load_config_config {
+ my ( $file ) = @_;
+
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $name, $val ) = $line =~ m/^(.+?)=(.*)$/;
+ next unless defined $name && defined $val;
+
+ # Validate the incoming values...
+ if ( $name && exists( $config{$name} ) ) {
+ if ( !$config{$name}->{pat} || $val =~ m/$config{$name}->{pat}/ ) {
+ $config{$name}->{val} = $val;
+ $config{$name}->{read} = 1;
+ }
+ }
+ }
+}
+
+# load_config_tbl_meta {{{3
+sub load_config_tbl_meta {
+ my ( $file ) = @_;
+
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ # Each tbl_meta section has all the properties defined in %col_props.
+ my ( $col , $rest ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $col;
+ my %parts = $rest =~ m/(\w+)='((?:(?!(?<!\\)').)*)'/g; # Properties are single-quoted
+
+ # Each section read from the config file has one extra property: which table it
+ # goes in.
+ my $tbl = $parts{tbl} or die "There's no table for tbl_meta $col";
+ my $meta = $tbl_meta{$tbl} or die "There's no table in tbl_meta named $tbl";
+
+ # The section is user-defined by definition (if that makes sense).
+ $parts{user} = 1;
+
+ # The column may already exist in the table, in which case this is just a
+ # customization.
+ $meta->{cols}->{$col} ||= {};
+
+ foreach my $prop ( keys %col_props ) {
+ if ( !defined($parts{$prop}) ) {
+ # Make it default to whatever's in col_props.
+ $parts{$prop} = $col_props{$prop};
+ }
+
+ # Un-escape escaping
+ $parts{$prop} =~ s/\\\\/\\/g;
+ $parts{$prop} =~ s/\\'/'/g;
+
+ if ( ref $col_props{$prop} ) {
+ if ( $prop eq 'trans' ) {
+ $meta->{cols}->{$col}->{trans}
+ = [ unique(grep { exists $trans_funcs{$_} } split(',', $parts{$prop})) ];
+ }
+ else {
+ $meta->{cols}->{$col}->{$prop} = [ split(',', $parts{$prop}) ];
+ }
+ }
+ else {
+ $meta->{cols}->{$col}->{$prop} = $parts{$prop};
+ }
+ }
+
+ }
+}
+
+# save_config {{{3
+sub save_config {
+ print "\n";
+ return if $config{readonly}->{val};
+ # return if no config file was loaded and -w wasn't specified
+ if (not $conf_file) {
+ if (not $opts{w}) {
+ return;
+ }
+ else {
+ # if no config was loaded but -w was specified,
+ # write to $default_home_conf
+ $conf_file = $default_home_conf;
+ }
+ }
+ elsif ($conf_file and $opts{w}) {
+ print "Loaded config file on start-up, so ignoring -w (see --help)\n"
+ }
+
+ my $dirname = dirname($conf_file);
+
+ # if directories don't exist, create them. This could cause errors
+ # or warnings if a central config doesn't have readonly=1, but being
+ # flexible requires giving the user enough rope to hang themselves with.
+ if ( ! -d $dirname ) {
+ mkdir $dirname
+ or die "Can't create directory '$dirname': $OS_ERROR";
+ }
+ if ( ! -d "$dirname/plugins" ) {
+ mkdir "$dirname/plugins"
+ or warn "Can't create directory '$dirname/plugins': $OS_ERROR\n";
+ }
+
+ # Save to a temp file first, so a crash doesn't destroy the main config file
+ my $tmpfile = File::Temp->new( TEMPLATE => 'innotopXXXXX', DIR => $dirname, SUFFIX => '.conf.tmp');
+ open my $file, "+>", $tmpfile
+ or die("Can't write to $tmpfile: $OS_ERROR");
+ print $file "version=$VERSION\n";
+
+ foreach my $section ( @ordered_config_file_sections ) {
+ die "No such config file section $section" unless $config_file_sections{$section};
+ print $file "\n[$section]\n\n";
+ $config_file_sections{$section}->{writer}->($file);
+ print $file "\n[/$section]\n";
+ }
+
+ # Now clobber the main config file with the temp.
+ close $file or die("Can't close $tmpfile: $OS_ERROR");
+ rename($tmpfile, $conf_file) or die("Can't rename $tmpfile to $conf_file: $OS_ERROR");
+}
+
+# load_config_connections {{{3
+sub load_config_connections {
+ return if $opts{u} or $opts{p} or $opts{h} or $opts{P}; # don't load connections if DSN or user/pass options used
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $key , $rest ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $key;
+ my %parts = $rest =~ m/(\S+?)=(\S*)/g;
+ my %conn = map { $_ => $parts{$_} || '' } @conn_parts;
+ $connections{$key} = \%conn;
+ }
+}
+
+# save_config_connections {{{3
+sub save_config_connections {
+ my $file = shift;
+ foreach my $conn ( sort keys %connections ) {
+ my $href = $connections{$conn};
+ my @keys = $href->{savepass} ? @conn_parts : grep { $_ ne 'pass' } @conn_parts;
+ print $file "$conn=", join(' ', map { "$_=$href->{$_}" } grep { defined $href->{$_} } @keys), "\n";
+ }
+}
+
+sub load_config_colors {
+ my ( $file ) = @_;
+ my %rule_set_for;
+
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $tbl, $rule ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $tbl && $rule;
+ next unless exists $tbl_meta{$tbl};
+ my %parts = $rule =~ m/(\w+)='((?:(?!(?<!\\)').)*)'/g; # Properties are single-quoted
+ next unless $parts{col} && exists $tbl_meta{$tbl}->{cols}->{$parts{col}};
+ next unless $parts{op} && exists $comp_ops{$parts{op}};
+ next unless defined $parts{arg};
+ next unless defined $parts{color};
+ my @colors = unique(grep { exists $ansicolors{$_} } split(/\W+/, $parts{color}));
+ next unless @colors;
+
+ # Finally! Enough validation...
+ $rule_set_for{$tbl} ||= [];
+ push @{$rule_set_for{$tbl}}, \%parts;
+ }
+
+ foreach my $tbl ( keys %rule_set_for ) {
+ $tbl_meta{$tbl}->{colors} = $rule_set_for{$tbl};
+ $tbl_meta{$tbl}->{color_func} = make_color_func($tbl_meta{$tbl});
+ $tbl_meta{$tbl}->{cust}->{colors} = 1;
+ }
+}
+
+# save_config_colors {{{3
+sub save_config_colors {
+ my $file = shift;
+ foreach my $tbl ( sort keys %tbl_meta ) {
+ my $meta = $tbl_meta{$tbl};
+ next unless $meta->{cust}->{colors};
+ foreach my $rule ( @{$meta->{colors}} ) {
+ print $file "$tbl=", join(
+ ' ',
+ map {
+ my $val = $rule->{$_};
+ $val =~ s/([\\'])/\\$1/g; # Escape backslashes and single quotes
+ "$_='$val'"; # Enclose in single quotes
+ }
+ qw(col op arg color)
+ ), "\n";
+ }
+ }
+}
+
+# load_config_active_connections {{{3
+sub load_config_active_connections {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $key , $rest ) = $line =~ m/^(.*?)=(.*)$/;
+ next unless $key && exists $modes{$key};
+ my @parts = grep { exists $connections{$_} } split(/ /, $rest);
+ $modes{$key}->{connections} = [ @parts ] if exists $modes{$key};
+ }
+}
+
+# save_config_active_connections {{{3
+sub save_config_active_connections {
+ my $file = shift;
+ foreach my $mode ( sort keys %modes ) {
+ my @connections = get_connections($mode);
+ print $file "$mode=", join(' ', @connections), "\n";
+ }
+}
+
+# load_config_stmt_sleep_times {{{3
+sub load_config_stmt_sleep_times {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $key , $val ) = split('=', $line);
+ next unless $key && defined $val && $val =~ m/$num_regex/;
+ $stmt_sleep_time_for{$key} = $val;
+ }
+}
+
+# save_config_stmt_sleep_times {{{3
+sub save_config_stmt_sleep_times {
+ my $file = shift;
+ foreach my $key ( sort keys %stmt_sleep_time_for ) {
+ print $file "$key=$stmt_sleep_time_for{$key}\n";
+ }
+}
+
+# load_config_mvs {{{3
+sub load_config_mvs {
+ my ( $file ) = @_;
+ while ( my $line = <$file> ) {
+ chomp $line;
+ next if $line =~ m/^#/;
+ last if $line =~ m/^\[/;
+
+ my ( $key , $val ) = split('=', $line);
+ next unless $key && defined $val && $val =~ m/$num_regex/;
+ $mvs{$key} = $val;
+ }
+}
+
+# save_config_mvs {{{3
+sub save_config_mvs {
+ my $file = shift;
+ foreach my $key ( sort keys %mvs ) {
+ print $file "$key=$mvs{$key}\n";
+ }
+}
+
+# edit_configuration {{{3
+sub edit_configuration {
+ my $key = '';
+ while ( $key ne 'q' ) {
+ $clear_screen_sub->();
+ my @display_lines = '';
+
+ if ( $key && $cfg_editor_action{$key} ) {
+ $cfg_editor_action{$key}->{func}->();
+ }
+
+ # Show help
+ push @display_lines, create_caption('What configuration do you want to edit?',
+ create_table2(
+ [ sort keys %cfg_editor_action ],
+ { map { $_ => $_ } keys %cfg_editor_action },
+ { map { $_ => $cfg_editor_action{$_}->{note} } keys %cfg_editor_action },
+ { sep => ' ' }));
+
+ draw_screen(\@display_lines);
+ $key = pause('');
+ }
+}
+
+# edit_configuration_variables {{{3
+sub edit_configuration_variables {
+ $clear_screen_sub->();
+ my $mode = $config{mode}->{val};
+
+ my %config_choices
+ = map { $_ => $config{$_}->{note} || '' }
+ # Only config values that are marked as applying to this mode.
+ grep {
+ my $key = $_;
+ $config{$key}->{conf} &&
+ ( $config{$key}->{conf} eq 'ALL'
+ || grep { $mode eq $_ } @{$config{$key}->{conf}} )
+ } keys %config;
+
+ my $key = prompt_list(
+ "Enter the name of the variable you wish to configure",
+ '',
+ sub{ return keys %config_choices },
+ \%config_choices);
+
+ if ( exists($config_choices{$key}) ) {
+ get_config_interactive($key);
+ }
+}
+
+# edit_color_rules {{{3
+sub edit_color_rules {
+ my ( $tbl ) = @_;
+ $clear_screen_sub->();
+ $tbl ||= choose_visible_table();
+ if ( $tbl && exists($tbl_meta{$tbl}) ) {
+ my $meta = $tbl_meta{$tbl};
+ my @cols = ('', qw(col op arg color));
+ my $info = { map { $_ => { hdr => $_, just => '-', } } @cols };
+ $info->{label}->{maxw} = 30;
+ my $key;
+ my $selected_rule;
+
+ # This loop builds a tabular view of the rules.
+ do {
+
+ # Show help
+ if ( $key && $key eq '?' ) {
+ my @display_lines = '';
+ push @display_lines, create_caption('Editor key mappings',
+ create_table2(
+ [ sort keys %color_editor_action ],
+ { map { $_ => $_ } keys %color_editor_action },
+ { map { $_ => $color_editor_action{$_}->{note} } keys %color_editor_action },
+ { sep => ' ' }));
+ draw_screen(\@display_lines);
+ pause();
+ $key = '';
+ }
+ else {
+
+ # Do the action specified
+ $selected_rule ||= 0;
+ if ( $key && $color_editor_action{$key} ) {
+ $selected_rule = $color_editor_action{$key}->{func}->($tbl, $selected_rule);
+ $selected_rule ||= 0;
+ }
+
+ # Build the table of rules. If the terminal has color, the selected rule
+ # will be highlighted; otherwise a > at the left will indicate.
+ my $data = $meta->{colors} || [];
+ foreach my $i ( 0..@$data - 1 ) {
+ $data->[$i]->{''} = $i == $selected_rule ? '>' : '';
+ }
+ my @display_lines = create_table(\@cols, $info, $data);
+
+ # Highlight selected entry
+ for my $i ( 0 .. $#display_lines ) {
+ if ( $display_lines[$i] =~ m/^>/ ) {
+ $display_lines[$i] = [ $display_lines[$i], 'reverse' ];
+ }
+ }
+
+ # Draw the screen and wait for a command.
+ unshift @display_lines, '',
+ "Editing color rules for $meta->{capt}. Press ? for help, q to "
+ . "quit.", '';
+ draw_screen(\@display_lines);
+ print "\n\n", word_wrap('Rules are applied in order from top to '
+ . 'bottom. The first matching rule wins and prevents the '
+ . 'rest of the rules from being applied.');
+ $key = pause('');
+ }
+ } while ( $key ne 'q' );
+ $meta->{color_func} = make_color_func($meta);
+ }
+}
+
+# add_quick_filter {{{3
+sub add_quick_filter {
+ my $tbl = choose_visible_table();
+ if ( $tbl && exists($tbl_meta{$tbl}) ) {
+ print "\n";
+ my $response = prompt_list(
+ "Enter column name and filter text",
+ '',
+ sub { return keys %{$tbl_meta{$tbl}->{cols}} },
+ ()
+ );
+ my ( $col, $text ) = split(/\s+/, $response, 2);
+
+ # You can't filter on a nonexistent column. But if you filter on a pivoted
+ # table, the columns are different, so on a pivoted table, allow filtering
+ # on the 'name' column.
+ # NOTE: if a table is pivoted and un-pivoted, this will likely cause crashes.
+ # Currently not an issue since there's no way to toggle pivot/nopivot.
+ return unless $col && $text &&
+ (exists($tbl_meta{$tbl}->{cols}->{$col})
+ || ($tbl_meta{$tbl}->{pivot} && $col eq 'name'));
+
+ my ( $sub, $err ) = compile_filter( "defined \$set->{$col} && \$set->{$col} =~ m/$text/" );
+ return if !$sub || $err;
+ my $name = "quick_$tbl.$col";
+ $filters{$name} = {
+ func => $sub,
+ text => $text,
+ user => 1,
+ quick => 1,
+ name => $name,
+ note => 'Quick-filter',
+ tbls => [$tbl],
+ };
+ push @{$tbl_meta{$tbl}->{filters}}, $name;
+ }
+}
+
+# clear_quick_filters {{{3
+sub clear_quick_filters {
+ my $tbl = choose_visible_table(
+ # Only tables that have quick-filters
+ sub {
+ my ( $tbl ) = @_;
+ return scalar grep { $filters{$_}->{quick} } @{ $tbl_meta{$tbl}->{filters} };
+ }
+ );
+ if ( $tbl && exists($tbl_meta{$tbl}) ) {
+ my @current = @{$tbl_meta{$tbl}->{filters}};
+ @current = grep { !$filters{$_}->{quick} } @current;
+ $tbl_meta{$tbl}->{filters} = \@current;
+ }
+}
+
+sub edit_plugins {
+ $clear_screen_sub->();
+
+ my @cols = ('', qw(class desc active));
+ my $info = { map { $_ => { hdr => $_, just => '-', } } @cols };
+ my @rows = map { $plugins{$_} } sort keys %plugins;
+ my $key;
+ my $selected;
+
+ # This loop builds a tabular view of the plugins.
+ do {
+
+ # Show help
+ if ( $key && $key eq '?' ) {
+ my @display_lines = '';
+ push @display_lines, create_caption('Editor key mappings',
+ create_table2(
+ [ sort keys %plugin_editor_action ],
+ { map { $_ => $_ } keys %plugin_editor_action },
+ { map { $_ => $plugin_editor_action{$_}->{note} } keys %plugin_editor_action },
+ { sep => ' ' }));
+ draw_screen(\@display_lines);
+ pause();
+ $key = '';
+ }
+
+ # Do the action specified
+ else {
+ $selected ||= 0;
+ if ( $key && $plugin_editor_action{$key} ) {
+ $selected = $plugin_editor_action{$key}->{func}->(\@rows, $selected);
+ $selected ||= 0;
+ }
+
+ # Build the table of plugins.
+ foreach my $row ( 0.. $#rows ) {
+ $rows[$row]->{''} = $row eq $selected ? '>' : ' ';
+ }
+ my @display_lines = create_table(\@cols, $info, \@rows);
+
+ # Highlight selected entry
+ for my $i ( 0 .. $#display_lines ) {
+ if ( $display_lines[$i] =~ m/^>/ ) {
+ $display_lines[$i] = [ $display_lines[$i], 'reverse' ];
+ }
+ }
+
+ # Draw the screen and wait for a command.
+ unshift @display_lines, '',
+ "Plugin Management. Press ? for help, q to quit.", '';
+ draw_screen(\@display_lines);
+ $key = pause('');
+ }
+ } while ( $key ne 'q' );
+}
+
+# edit_table {{{3
+sub edit_table {
+ $clear_screen_sub->();
+ my ( $tbl ) = @_;
+ $tbl ||= choose_visible_table();
+ if ( $tbl && exists($tbl_meta{$tbl}) ) {
+ my $meta = $tbl_meta{$tbl};
+ my @cols = ('', qw(name hdr label src));
+ my $info = { map { $_ => { hdr => $_, just => '-', } } @cols };
+ $info->{label}->{maxw} = 30;
+ my $key;
+ my $selected_column;
+
+ # This loop builds a tabular view of the tbl_meta's structure, showing each column
+ # in the entry as a row.
+ do {
+
+ # Show help
+ if ( $key && $key eq '?' ) {
+ my @display_lines = '';
+ push @display_lines, create_caption('Editor key mappings',
+ create_table2(
+ [ sort keys %tbl_editor_action ],
+ { map { $_ => $_ } keys %tbl_editor_action },
+ { map { $_ => $tbl_editor_action{$_}->{note} } keys %tbl_editor_action },
+ { sep => ' ' }));
+ draw_screen(\@display_lines);
+ pause();
+ $key = '';
+ }
+ else {
+
+ # Do the action specified
+ $selected_column ||= $meta->{visible}->[0];
+ if ( $key && $tbl_editor_action{$key} ) {
+ $selected_column = $tbl_editor_action{$key}->{func}->($tbl, $selected_column);
+ $selected_column ||= $meta->{visible}->[0];
+ }
+
+ # Build the pivoted view of the table's meta-data. If the terminal has color,
+ # The selected row will be highlighted; otherwise a > at the left will indicate.
+ my $data = [];
+ foreach my $row ( @{$meta->{visible}} ) {
+ my %hash;
+ @hash{ @cols } = @{$meta->{cols}->{$row}}{@cols};
+ $hash{src} = '' if ref $hash{src};
+ $hash{name} = $row;
+ $hash{''} = $row eq $selected_column ? '>' : ' ';
+ push @$data, \%hash;
+ }
+ my @display_lines = create_table(\@cols, $info, $data);
+
+ # Highlight selected entry
+ for my $i ( 0 .. $#display_lines ) {
+ if ( $display_lines[$i] =~ m/^>/ ) {
+ $display_lines[$i] = [ $display_lines[$i], 'reverse' ];
+ }
+ }
+
+ # Draw the screen and wait for a command.
+ unshift @display_lines, '',
+ "Editing table definition for $meta->{capt}. Press ? for help, q to quit.", '';
+ draw_screen(\@display_lines, { clear => 1 });
+ $key = pause('');
+ }
+ } while ( $key ne 'q' );
+ }
+}
+
+# choose_mode_tables {{{3
+# Choose which table(s), and in what order, to display in a given mode.
+sub choose_mode_tables {
+ my $mode = $config{mode}->{val};
+ my @tbls = @{$modes{$mode}->{visible_tables}};
+ my $new = prompt_list(
+ "Choose tables to display",
+ join(' ', @tbls),
+ sub { return @{$modes{$mode}->{tables}} },
+ { map { $_ => $tbl_meta{$_}->{capt} } @{$modes{$mode}->{tables}} }
+ );
+ $modes{$mode}->{visible_tables} =
+ [ unique(grep { $_ && exists $tbl_meta{$_} } split(/\s+/, $new)) ];
+ $modes{$mode}->{cust}->{visible_tables} = 1;
+}
+
+# set_visible_table {{{3
+sub set_visible_table {
+ my ( $tbl ) = @_;
+ my $mode = $config{mode}->{val};
+ my @tbls = grep { $_ eq $tbl } @{$modes{$mode}->{tables}};
+ if ( @tbls == 1 ) {
+ $modes{$mode}->{visible_tables} = [ $tbl ];
+ $modes{$mode}->{cust}->{visible_tables} = 1;
+ }
+}
+
+# choose_visible_table {{{3
+sub choose_visible_table {
+ my ( $grep_cond ) = @_;
+ my $mode = $config{mode}->{val};
+ my @tbls
+ = grep { $grep_cond ? $grep_cond->($_) : 1 }
+ @{$modes{$mode}->{visible_tables}};
+ my $tbl = $tbls[0];
+ if ( @tbls > 1 ) {
+ $tbl = prompt_list(
+ "Choose a table",
+ '',
+ sub { return @tbls },
+ { map { $_ => $tbl_meta{$_}->{capt} } @tbls }
+ );
+ }
+ return $tbl;
+}
+
+sub toggle_aggregate {
+ my ( $tbl ) = @_;
+ $tbl ||= choose_visible_table();
+ return unless $tbl && exists $tbl_meta{$tbl};
+ my $meta = $tbl_meta{$tbl};
+ $meta->{aggregate} ^= 1;
+}
+
+sub choose_filters {
+ my ( $tbl ) = @_;
+ $tbl ||= choose_visible_table();
+ return unless $tbl && exists $tbl_meta{$tbl};
+ my $meta = $tbl_meta{$tbl};
+ $clear_screen_sub->();
+
+ print "Choose filters for $meta->{capt}:\n";
+
+ my $ini = join(' ', @{$meta->{filters}});
+ my $val = prompt_list(
+ 'Choose filters',
+ $ini,
+ sub { return keys %filters },
+ {
+ map { $_ => $filters{$_}->{note} }
+ grep { grep { $tbl eq $_ } @{$filters{$_}->{tbls}} }
+ keys %filters
+ }
+ );
+
+ my @choices = unique($val =~ m/(\S+)/g);
+ foreach my $new ( grep { !exists($filters{$_}) } @choices ) {
+ my $answer = prompt("There is no filter called '$new'. Create it?", undef, 'y');
+ if ( $answer eq 'y' ) {
+ create_new_filter($new, $tbl);
+ }
+ }
+ @choices = grep { exists $filters{$_} } @choices;
+ @choices = grep { grep { $tbl eq $_ } @{$filters{$_}->{tbls}} } @choices;
+ $meta->{filters} = [ @choices ];
+ $meta->{cust}->{filters} = 1;
+}
+
+sub choose_group_cols {
+ my ( $tbl ) = @_;
+ $tbl ||= choose_visible_table();
+ return unless $tbl && exists $tbl_meta{$tbl};
+ $clear_screen_sub->();
+ my $meta = $tbl_meta{$tbl};
+ my $curr = join(', ', @{$meta->{group_by}});
+ my $val = prompt_list(
+ 'Group-by columns',
+ $curr,
+ sub { return keys %{$meta->{cols}} },
+ { map { $_ => $meta->{cols}->{$_}->{label} } keys %{$meta->{cols}} });
+ if ( $curr ne $val ) {
+ $meta->{group_by} = [ grep { exists $meta->{cols}->{$_} } $val =~ m/(\w+)/g ];
+ $meta->{cust}->{group_by} = 1;
+ }
+}
+
+sub choose_sort_cols {
+ my ( $tbl ) = @_;
+ $tbl ||= choose_visible_table();
+ return unless $tbl && exists $tbl_meta{$tbl};
+ $clear_screen_sub->();
+ my $meta = $tbl_meta{$tbl};
+
+ my ( $cols, $hints );
+ if ( $meta->{pivot} ) {
+ $cols = sub { qw(name set_0) };
+ $hints = { name => 'name', set_0 => 'set_0' };
+ }
+ else {
+ $cols = sub { return keys %{$meta->{cols}} };
+ $hints = { map { $_ => $meta->{cols}->{$_}->{label} } keys %{$meta->{cols}} };
+ }
+
+ my $val = prompt_list(
+ 'Sort columns (reverse sort with -col)',
+ $meta->{sort_cols},
+ $cols,
+ $hints );
+ if ( $meta->{sort_cols} ne $val ) {
+ $meta->{sort_cols} = $val;
+ $meta->{cust}->{sort_cols} = 1;
+ $tbl_meta{$tbl}->{sort_func} = make_sort_func($tbl_meta{$tbl});
+ }
+}
+
+# create_new_filter {{{3
+sub create_new_filter {
+ my ( $filter, $tbl ) = @_;
+ $clear_screen_sub->();
+
+ if ( !$filter || $filter =~ m/\W/ ) {
+ print word_wrap("Choose a name for the filter. This name is not displayed, and is only used "
+ . "for internal reference. It can only contain lowercase letters, numbers, and underscores.");
+ print "\n\n";
+ do {
+ $filter = prompt("Enter filter name");
+ } while ( !$filter || $filter =~ m/\W/ );
+ }
+
+ my $completion = sub { keys %{$tbl_meta{$tbl}->{cols}} };
+ my ( $err, $sub, $body );
+ do {
+ $clear_screen_sub->();
+ print word_wrap("A filter is a Perl subroutine that accepts a hashref of columns "
+ . "called \$set, and returns a true value if the filter accepts the row. Example:\n"
+ . " \$set->{active_secs} > 5\n"
+ . "will only allow rows if their active_secs column is greater than 5.");
+ print "\n\n";
+ if ( $err ) {
+ print "There's an error in your filter expression: $err\n\n";
+ }
+ $body = prompt("Enter subroutine body", undef, undef, $completion);
+ ( $sub, $err ) = compile_filter($body);
+ } while ( $err );
+
+ $filters{$filter} = {
+ func => $sub,
+ text => $body,
+ user => 1,
+ name => $filter,
+ note => 'User-defined filter',
+ tbls => [$tbl],
+ };
+}
+
+# get_config_interactive {{{3
+sub get_config_interactive {
+ my $key = shift;
+ $clear_screen_sub->();
+
+ # Print help first.
+ print "Enter a new value for '$key' ($config{$key}->{note}).\n";
+
+ my $current = ref($config{$key}->{val}) ? join(" ", @{$config{$key}->{val}}) : $config{$key}->{val};
+
+ my $new_value = prompt('Enter a value', $config{$key}->{pat}, $current);
+ $config{$key}->{val} = $new_value;
+}
+
+sub edit_current_var_set {
+ my $mode = $config{mode}->{val};
+ my $name = $config{"${mode}_set"}->{val};
+ my $variables = $var_sets{$name}->{text};
+
+ my $new = $variables;
+ do {
+ $clear_screen_sub->();
+ $new = prompt("Enter variables for $name", undef, $variables);
+ } until ( $new );
+
+ if ( $new ne $variables ) {
+ @{$var_sets{$name}}{qw(text user)} = ( $new, 1);
+ }
+}
+
+
+sub choose_var_set {
+ my ( $key ) = @_;
+ $clear_screen_sub->();
+
+ my $new_value = prompt_list(
+ 'Choose a set of values to display, or enter the name of a new one',
+ $config{$key}->{val},
+ sub { return keys %var_sets },
+ { map { $_ => $var_sets{$_}->{text} } keys %var_sets });
+
+ if ( !exists $var_sets{$new_value} ) {
+ add_new_var_set($new_value);
+ }
+
+ $config{$key}->{val} = $new_value if exists $var_sets{$new_value};
+}
+
+sub switch_var_set {
+ my ( $cfg_var, $dir ) = @_;
+ my @var_sets = sort keys %var_sets;
+ my $cur = $config{$cfg_var}->{val};
+ my $pos = grep { $_ lt $cur } @var_sets;
+ my $newpos = ($pos + $dir) % @var_sets;
+ $config{$cfg_var}->{val} = $var_sets[$newpos];
+ $clear_screen_sub->();
+}
+
+# Online configuration and prompting functions {{{2
+
+# edit_stmt_sleep_times {{{3
+sub edit_stmt_sleep_times {
+ $clear_screen_sub->();
+ my $stmt = prompt_list('Specify a statement', '', sub { my @tmparray = sort keys %stmt_maker_for; return @tmparray });
+ return unless $stmt && exists $stmt_maker_for{$stmt};
+ $clear_screen_sub->();
+ my $curr_val = $stmt_sleep_time_for{$stmt} || 0;
+ my $new_val = prompt('Specify a sleep delay after calling this SQL', $num_regex, $curr_val);
+ if ( $new_val ) {
+ $stmt_sleep_time_for{$stmt} = $new_val;
+ }
+ else {
+ delete $stmt_sleep_time_for{$stmt};
+ }
+}
+
+# edit_server_groups {{{3
+# Choose which server connections are in a server group. First choose a group,
+# then choose which connections are in it.
+sub edit_server_groups {
+ $clear_screen_sub->();
+ my $mode = $config{mode}->{val};
+ my $group = $modes{$mode}->{server_group};
+ my %curr = %server_groups;
+ my $new = choose_or_create_server_group($group, 'to edit');
+ $clear_screen_sub->();
+ if ( exists $curr{$new} ) {
+ # Don't do this step if the user just created a new server group,
+ # because part of that process was to choose connections.
+ my $cxns = join(' ', @{$server_groups{$new}});
+ my @conns = choose_or_create_connection($cxns, 'for this group');
+ $server_groups{$new} = \@conns;
+ }
+}
+
+# choose_server_groups {{{3
+sub choose_server_groups {
+ $clear_screen_sub->();
+ my $mode = $config{mode}->{val};
+ my $group = $modes{$mode}->{server_group};
+ my $new = choose_or_create_server_group($group, 'for this mode');
+ $modes{$mode}->{server_group} = $new if exists $server_groups{$new};
+}
+
+sub choose_or_create_server_group {
+ my ( $group, $prompt ) = @_;
+ my $new = '';
+
+ my @available = sort keys %server_groups;
+
+ if ( @available ) {
+ print "You can enter the name of a new group to create it.\n";
+
+ $new = prompt_list(
+ "Choose a server group $prompt",
+ $group,
+ sub { return @available },
+ { map { $_ => join(' ', @{$server_groups{$_}}) } @available });
+
+ $new =~ s/\s.*//;
+
+ if ( !exists $server_groups{$new} ) {
+ my $answer = prompt("There is no server group called '$new'. Create it?", undef, "y");
+ if ( $answer eq 'y' ) {
+ add_new_server_group($new);
+ }
+ }
+ }
+ else {
+ $new = add_new_server_group();
+ }
+ return $new;
+}
+
+sub choose_or_create_connection {
+ my ( $cxns, $prompt ) = @_;
+ print "You can enter the name of a new connection to create it.\n";
+
+ my @available = sort keys %connections;
+ my $new_cxns = prompt_list(
+ "Choose connections $prompt",
+ $cxns,
+ sub { return @available },
+ { map { $_ => $connections{$_}->{dsn} } @available });
+
+ my @new = unique(grep { !exists $connections{$_} } $new_cxns =~ m/(\S+)/g);
+ foreach my $new ( @new ) {
+ my $answer = prompt("There is no connection called '$new'. Create it?", undef, "y");
+ if ( $answer eq 'y' ) {
+ add_new_dsn($new);
+ }
+ }
+
+ return unique(grep { exists $connections{$_} } split(/\s+/, $new_cxns));
+}
+
+# choose_servers {{{3
+sub choose_servers {
+ $clear_screen_sub->();
+ my $mode = $config{mode}->{val};
+ my $cxns = join(' ', get_connections());
+ my @chosen = choose_or_create_connection($cxns, 'for this mode');
+ $modes{$mode}->{connections} = \@chosen;
+ $modes{$mode}->{server_group} = ''; # Clear this because it overrides {connections}
+ get_connections(); # This will set the server group if it matches connections just chosen
+}
+
+# display_license {{{3
+sub display_license {
+ $clear_screen_sub->();
+
+ print $innotop_license;
+
+ pause();
+}
+
+# Data-retrieval functions {{{2
+# get_status_info {{{3
+# Get SHOW STATUS and SHOW VARIABLES together.
+sub get_status_info {
+ my @cxns = @_;
+ if ( !$info_gotten{status}++ ) {
+ foreach my $cxn ( @cxns ) {
+ $vars{$cxn}->{$clock} ||= {};
+ my $vars = $vars{$cxn}->{$clock};
+
+ my $sth = do_stmt($cxn, 'SHOW_STATUS') or next;
+ my $res = $sth->fetchall_arrayref();
+ map { $vars->{$_->[0]} = $_->[1] || 0 } @$res;
+
+ # Calculate hi-res uptime and add cxn to the hash. This duplicates get_driver_status,
+ # but it's most important to have consistency.
+ $vars->{Uptime_hires} ||= get_uptime($cxn);
+ $vars->{cxn} = $cxn;
+
- so much code devoted to parsing this messy, unparseable output that innotop is
++ # Add SHOW VARIABLES to the hash. If we've gotten this info before, skip and reuse.
+ if ( $show_variables{$cxn} ) {
+ $res = $show_variables{$cxn};
+ }
+ else {
+ $sth = do_stmt($cxn, 'SHOW_VARIABLES') or next;
+ $res = $sth->fetchall_arrayref();
+ $res = {map { $_->[0] => $_->[1] || 0 } @$res};
+ $show_variables{$cxn} = $res;
+ }
+ @{$vars}{keys %$res} = values %$res;
+
+ # Create sparklines for QPS and Threads_running. As a consequence of
+ # this, we get QPS for free. TODO: remove QPS computation from
+ # elsewhere.
+ my $pre = $vars{$cxn}->{$clock - 1};
+ if ( $pre && $pre->{Uptime_hires} ) {
+ my @prev_qps = ($pre->{SPARK_store_qps} || '') =~ m/(\S+)/g;
+ my @prev_run = ($pre->{SPARK_store_run} || '') =~ m/(\S+)/g;
+
+ # Find out the values; throw away if too many; sparkify; store.
+ my $this_qps = (($vars->{Questions} || 0) - ($pre->{Questions} || 0))/
+ ($vars->{Uptime_hires} - $pre->{Uptime_hires});
+ push @prev_qps, $this_qps;
+ shift @prev_qps if @prev_qps > $config{spark}->{val};
+ my $qps_spark = sparkify(@prev_qps);
+ $vars->{SPARK_qps} = $qps_spark;
+ $vars->{SPARK_store_qps} = join(' ', @prev_qps);
+ my $this_run = $vars->{Threads_running};
+ push @prev_run, $this_run;
+ shift @prev_run if @prev_run > $config{spark}->{val};
+ my $run_spark = sparkify(@prev_run);
+ $vars->{SPARK_run} = $run_spark;
+ $vars->{SPARK_store_run} = join(' ', @prev_run);
+ }
+ }
+ }
+}
+
+# Chooses a thread for explaining, killing, etc...
+# First arg is a func that can be called in grep.
+sub choose_thread {
+ my ( $grep_cond, $prompt ) = @_;
+
+ my %thread_for = map {
+ # Eliminate innotop's own threads.
+ $_ => $dbhs{$_}->{dbh} ? $dbhs{$_}->{dbh}->{mariadb_thread_id} : 0
+ } keys %connections;
+
+ my @candidates = grep {
+ $_->{id} != $thread_for{$_->{cxn}} && $grep_cond->($_)
+ } @current_queries;
+ return unless @candidates;
+
+ # Find out which server.
+ my @cxns = unique map { $_->{cxn} } @candidates;
+ my ( $cxn ) = select_cxn('On which server', @cxns);
+ return unless $cxn && exists($connections{$cxn});
+
+ # Re-filter the list of candidates to only those on this server
+ @candidates = grep { $_->{cxn} eq $cxn } @candidates;
+
+ # Find out which thread to do.
+ my $info;
+ if ( @candidates > 1 ) {
+
+ # Sort longest-active first, then longest-idle.
+ my $sort_func = sub {
+ my ( $a, $b ) = @_;
+ return $a->{query} && !$b->{query} ? 1
+ : $b->{query} && !$a->{query} ? -1
+ : ($a->{time} || 0) cmp ($b->{time} || 0);
+ };
+ my @threads = map { $_->{id} } reverse sort { $sort_func->($a, $b) } @candidates;
+
+ print "\n";
+ my $thread = prompt_list($prompt,
+ $threads[0],
+ sub { return @threads });
+ return unless $thread && $thread =~ m/$int_regex/;
+
+ # Find the info hash of that query on that server.
+ ( $info ) = grep { $thread == $_->{id} } @candidates;
+ }
+ else {
+ $info = $candidates[0];
+ }
+ return $info;
+}
+
+# analyze_query {{{3
+# Allows the user to show fulltext, explain, show optimized...
+sub analyze_query {
+ my ( $action ) = @_;
+
+ my $info = choose_thread(
+ sub { $_[0]->{query} },
+ 'Select a thread to analyze',
+ );
+ return unless $info;
+
+ my %actions = (
+ e => \&display_explain,
+ f => \&show_full_query,
+ o => \&show_optimized_query,
+ );
+ do {
+ $actions{$action}->($info);
+ print "\n";
+ $action = pause('Press e to explain, f for full query, o for optimized query');
+ } while ( exists($actions{$action}) );
+}
+
+# inc {{{3
+# Returns the difference between two sets of variables/status/innodb stuff.
+sub inc {
+ my ( $offset, $cxn ) = @_;
+ my $vars = $vars{$cxn};
+ if ( $offset < 0 ) {
+ return $vars->{$clock};
+ }
+ elsif ( exists $vars{$clock - $offset} && !exists $vars->{$clock - $offset - 1} ) {
+ return $vars->{$clock - $offset};
+ }
+ my $cur = $vars->{$clock - $offset};
+ my $pre = $vars->{$clock - $offset - 1};
+ return {
+ # Numeric variables get subtracted, non-numeric get passed straight through.
+ map {
+ $_ =>
+ ( (defined $cur->{$_} && $cur->{$_} =~ m/$num_regex/ && ($pre->{$_} || '') =~ m/$num_regex/ )
+ ? $cur->{$_} - ($pre->{$_} || 0)
+ : $cur->{$_} )
+ } keys %{$cur}
+ };
+}
+
+# extract_values {{{3
+# Arguments are a set of values (which may be incremental, derived from
+# current and previous), current, and previous values.
+# TODO: there are a few places that don't remember prev set so can't pass it.
+sub extract_values {
+ my ( $set, $cur, $pre, $tbl ) = @_;
+
+ # Hook in event listeners
+ foreach my $listener ( @{$event_listener_for{extract_values}} ) {
+ $listener->extract_values($set, $cur, $pre, $tbl);
+ }
+
+ my $result = {};
+ my $meta = $tbl_meta{$tbl};
+ my $cols = $meta->{cols};
+ foreach my $key ( keys %$cols ) {
+ my $info = $cols->{$key}
+ or die "Column '$key' doesn't exist in $tbl";
+ die "No func defined for '$key' in $tbl"
+ unless $info->{func};
+ eval {
+ $result->{$key} = $info->{func}->($set, $cur, $pre)
+ };
+ if ( $EVAL_ERROR ) {
+ if ( $config{debug}->{val} ) {
+ die $EVAL_ERROR;
+ }
+ $result->{$key} = $info->{num} ? 0 : '';
+ }
+ }
+ return $result;
+}
+
+# get_processlist_stats {{{3
+# Inserts special values as though they are SHOW STATUS counters.
+sub get_processlist_stats {
+ my @cxns = @_;
+ @current_queries = ();
+ if ( !$info_gotten{processlist_stats}++ ) {
+ foreach my $cxn ( @cxns ) {
+ my $max_query_time = 0;
+ my ($user_threads, $slaves, $longest_sql, $slave_sql, $locked);
+ $vars{$cxn}->{$clock} ||= {};
+ my $vars = $vars{$cxn}->{$clock};
+ $vars->{cxn} = $cxn;
+ my $stmt = do_stmt($cxn, 'PROCESSLIST_NO_IS') or next;
+ my $arr = $stmt->fetchall_arrayref({});
+ my $cur = undef;
+ foreach my $thread ( @$arr ) {
+ if ( ($thread->{state} || '') =~ m/lock/i ) {
+ $locked++;
+ }
+ # Ignore non-user threads, but remember the SQL in case there is
+ # no user SQL. Ignore sleeping threads and SHOW PROCESSLIST
+ # threads.
+ if ( ($thread->{user} || '') =~ m/system user/ ) {
+ if ( $thread->{info} && $thread->{time} ) {
+ $slave_sql = $thread->{info};
+ }
+ next;
+ }
+ next unless $thread->{command};
+ if ( $thread->{command} eq 'Binlog Dump' ) {
+ $slaves++;
+ next;
+ }
+ next unless $thread->{command} eq 'Query';
+ next unless $thread->{state} && $thread->{info};
+ next if $thread->{info} =~ m#/\*innotop#;
+ $user_threads++;
+ if ( $thread->{time} > $max_query_time ) {
+ $max_query_time = $thread->{time};
+ $longest_sql = $thread->{info};
+ if ( $thread->{state} eq 'Checking table' ) {
+ $longest_sql = 'CHECK TABLE ' . $thread->{info};
+ }
+ $cur = {
+ cxn => $cxn,
+ id => $thread->{id},
+ db => $thread->{db},
+ query => $thread->{info},
+ time => $thread->{time},
+ user => $thread->{user},
+ host => $thread->{host},
+ };
+ $thread->{host} =~ s/:.*$//;
+ }
+ }
+ $vars->{Max_query_time} = $max_query_time;
+ $vars->{User_threads_running} = $user_threads;
+ $vars->{Slaves} = $slaves || 0;
+ $vars->{Longest_sql} = $longest_sql || $slave_sql || '';
+ $vars->{Locked_count} = $locked || 0;
+ $vars->{Uptime_hires} ||= get_uptime($cxn);
+ push @current_queries, $cur if $cur;
+ }
+ }
+}
+
+# get_full_processlist {{{3
+sub get_full_processlist {
+ my @cxns = @_;
+ my @result;
+ foreach my $cxn ( @cxns ) {
+ my $stmt = do_stmt($cxn, 'PROCESSLIST') or next;
+ my $arr = $stmt->fetchall_arrayref({});
+ push @result, map { $_->{cxn} = $cxn; $_ } @$arr;
+ }
+ return @result;
+}
+
+# get_open_tables {{{3
+sub get_open_tables {
+ my @cxns = @_;
+ my @result;
+ foreach my $cxn ( @cxns ) {
+ my $stmt = do_stmt($cxn, 'OPEN_TABLES') or next;
+ my $arr = $stmt->fetchall_arrayref({});
+ push @result, map { $_->{cxn} = $cxn; $_ } @$arr;
+ }
+ return @result;
+}
+
+# get_index_statistics {{{3
+sub get_index_statistics {
+ my @cxns = @_;
+ my @result;
+ foreach my $cxn ( @cxns ) {
+ my $stmt = do_stmt($cxn, 'INDEX_STATISTICS') or next;
+ my $arr = $stmt->fetchall_arrayref({});
+ push @result, map { $_->{cxn} = $cxn; $_ } @$arr;
+ }
+ return @result;
+}
+
+# get_index_table_statistics {{{3
+sub get_index_table_statistics {
+ my @cxns = @_;
+ my @result;
+ foreach my $cxn ( @cxns ) {
+ my $stmt = do_stmt($cxn, 'INDEX_TABLE_STATISTICS') or next;
+ my $arr = $stmt->fetchall_arrayref({});
+ push @result, map { $_->{cxn} = $cxn; $_ } @$arr;
+ }
+ return @result;
+}
+
+# get_table_statistics {{{3
+sub get_table_statistics {
+ my @cxns = @_;
+ my @result;
+ foreach my $cxn ( @cxns ) {
+ my $stmt = do_stmt($cxn, 'TABLE_STATISTICS') or next;
+ my $arr = $stmt->fetchall_arrayref({});
+ push @result, map { $_->{cxn} = $cxn; $_ } @$arr;
+ }
+ return @result;
+}
+
+# get_innodb_blocked_blocker {{{3
+sub get_innodb_blocked_blocker {
+ my @cxns = @_;
+ my @result;
+ foreach my $cxn ( @cxns ) {
+ my $stmt = do_stmt($cxn, 'INNODB_BLOCKED_BLOCKER') or next;
+ my $arr = $stmt->fetchall_arrayref({});
+ push @result, map { $_->{cxn} = $cxn; $_ } @$arr;
+ }
+ return @result;
+}
+
+# get_innodb_status {{{3
+sub get_innodb_status {
+ my ( $cxns, $addl_sections ) = @_;
+ if ( !$config{skip_innodb}->{val} && !$info_gotten{innodb_status}++ ) {
+
+ # Determine which sections need to be parsed
+ my %sections_required =
+ map { $tbl_meta{$_}->{innodb} => 1 }
+ grep { $_ && $tbl_meta{$_}->{innodb} }
+ get_visible_tables();
+
+ # Add in any other sections the caller requested.
+ foreach my $sec ( @$addl_sections ) {
+ $sections_required{$sec} = 1;
+ }
+
+ foreach my $cxn ( @$cxns ) {
+ my $innodb_status_text;
+
+ if ( $file ) { # Try to fetch status text from the file.
+ my @stat = stat($file);
+
+ # Initialize the file.
+ if ( !$file_mtime ) {
+ # Initialize to 130k from the end of the file (because the limit
+ # on the size of innodb status is 128k even with Google's patches)
+ # and try to grab the last status from the file.
+ sysseek($file, (-128 * 1_024), 2);
+ }
+
+ # Read from the file.
+ my $buffer;
+ if ( !$file_mtime || $file_mtime != $stat[9] ) {
+ $file_data = '';
+ while ( sysread($file, $buffer, 4096) ) {
+ $file_data .= $buffer;
+ }
+ $file_mtime = $stat[9];
+ }
+
+ # Delete everything but the last InnoDB status text from the file.
+ $file_data =~ s/\A.*(?=^=====================================\n...... ........ INNODB MONITOR OUTPUT)//ms;
+ $innodb_status_text = $file_data;
+ }
+
+ else {
+ next if ($show_variables{$cxn}->{have_innodb} || 'YES') eq 'NO';
+ my $stmt = do_stmt($cxn, 'INNODB_STATUS') or next;
+ $innodb_status_text = $stmt->fetchrow_hashref()->{status};
+ }
+
+ next unless $innodb_status_text
+ && substr($innodb_status_text, 0, 100) =~ m/INNODB MONITOR OUTPUT/;
+
+ # Parse and merge into %vars storage
+ my %innodb_status = (
+ $innodb_parser->get_status_hash(
+ $innodb_status_text,
+ $config{debug}->{val},
+ \%sections_required,
+ 0, # don't parse full lock information
+ $show_variables{$cxn}->{version}
+ )
+ );
+ if ( !$innodb_status{IB_got_all} && $config{auto_wipe_dl}->{val} ) {
+ clear_deadlock($cxn);
+ }
+
+ # Merge using a hash slice, which is the fastest way
+ $vars{$cxn}->{$clock} ||= {};
+ my $hash = $vars{$cxn}->{$clock};
+ @{$hash}{ keys %innodb_status } = values %innodb_status;
+ $hash->{cxn} = $cxn;
+ $hash->{Uptime_hires} ||= get_uptime($cxn);
+ }
+ }
+}
+
+# clear_deadlock {{{3
+sub clear_deadlock {
+ my ( $cxn ) = @_;
+ return if $clearing_deadlocks++;
+ my $tbl = $connections{$cxn}->{dl_table};
+ return unless $tbl;
+
+ eval {
+ # disable binary logging for the session
+ do_query($cxn, "set SQL_LOG_BIN=0");
+
+ # Set up the table for creating a deadlock.
+ my $engine = version_ge($dbhs{$cxn}->{dbh}, '4.1.2') ? 'engine' : 'type';
+ return unless do_query($cxn, "drop table if exists $tbl");
+ return unless do_query($cxn, "create table $tbl(a int) $engine=innodb");
+ return unless do_query($cxn, "delete from $tbl");
+ return unless do_query($cxn, "insert into $tbl(a) values(0), (1)");
+ return unless do_query($cxn, "commit"); # Or the children will block against the parent
+
+ # Fork off two children to deadlock against each other.
+ my %children;
+ foreach my $child ( 0..1 ) {
+ my $pid = fork();
+ if ( defined($pid) && $pid == 0 ) { # I am a child
+ deadlock_thread( $child, $tbl, $cxn );
+ }
+ elsif ( !defined($pid) ) {
+ die("Unable to fork for clearing deadlocks!\n");
+ }
+ # I already exited if I'm a child, so I'm the parent.
+ $children{$child} = $pid;
+ }
+
+ # Wait for the children to exit.
+ foreach my $child ( keys %children ) {
+ my $pid = waitpid($children{$child}, 0);
+ }
+
+ # Clean up.
+ do_query($cxn, "drop table $tbl");
+
+ # enable binary logging for the session again
+ # the session by itself will not be used anymore, but this is clean :)
+ do_query($cxn, "set SQL_LOG_BIN=1");
+
+ };
+ if ( $EVAL_ERROR ) {
+ print $EVAL_ERROR;
+ pause();
+ }
+
+ $clearing_deadlocks = 0;
+}
+
+sub get_master_logs {
+ my @cxns = @_;
+ my @result;
+ if ( !$info_gotten{master_logs}++ ) {
+ foreach my $cxn ( @cxns ) {
+ my $stmt = do_stmt($cxn, 'SHOW_MASTER_LOGS') or next;
+ push @result, @{$stmt->fetchall_arrayref({})};
+ }
+ }
+ return @result;
+}
+
+# get_master_slave_status {{{3
+# Inserts special counters as though they are SHOW STATUS counters.
+sub get_master_slave_status {
+ my @cxns = @_;
+ if ( !$info_gotten{replication_status}++ ) {
+ foreach my $cxn ( @cxns ) {
+ $vars{$cxn}->{$clock} ||= {};
+ my $vars = $vars{$cxn}->{$clock};
+ $vars->{cxn} = $cxn;
+ $vars->{Uptime_hires} ||= get_uptime($cxn);
+
+ my $stmt = do_stmt($cxn, 'SHOW_MASTER_STATUS') or next;
+ my $res = $stmt->fetchall_arrayref({})->[0];
+ @{$vars}{ keys %$res } = values %$res;
+
+ }
+ }
+}
+
+# get_slave_status {{{3
+# Separated handling of slave status to support 5.7 and replication channels
+sub get_slave_status {
+ my ($cxn, $channel) = @_;
+ my $chcxn = $channel . '=' . $cxn;
+ $vars{$chcxn}->{$clock} ||= {};
+ my $vars = $vars{$chcxn}->{$clock};
+ $vars->{chcxn} = $chcxn;
+ $vars->{Uptime_hires} ||= get_uptime($chcxn);
+
+ if ( $channel =~ /no_channels/ ) {
+ my $stmt = do_stmt($cxn, 'SHOW_SLAVE_STATUS') or next;
+ my $res = $stmt->fetchall_arrayref({});
+ if ( $res && @$res ) {
+ $res = $res->[0];
+ @{$vars}{ keys %$res } = values %$res;
+ $vars->{Slave_ok} =
+ (($res->{slave_sql_running} || 'Yes') eq 'Yes'
+ && ($res->{slave_io_running} || 'Yes') eq 'Yes') ? 'Yes' : 'No';
+ }
+ else {
+ $vars->{Slave_ok} = 'Off';
+ }
+ } else {
+ my $dbh = connect_to_db($cxn);
+ my $sql = 'SHOW SLAVE STATUS FOR CHANNEL \'' . $channel . '\'';
+ my $stmt = $dbh->prepare($sql ) ;
+ $stmt->execute();
+ my $res = $stmt->fetchall_arrayref({});
+ if ( $res && @$res ) {
+ $res = $res->[0];
+ @{$vars}{ keys %$res } = values %$res;
+ $vars->{Slave_ok} =
+ (($res->{slave_sql_running} || 'Yes') eq 'Yes'
+ && ($res->{slave_io_running} || 'Yes') eq 'Yes') ? 'Yes' : 'No';
+ }
+ else {
+ $vars->{Slave_ok} = 'Off';
+ }
+ }
+ }
+
+
+
+
+sub is_func {
+ my ( $word ) = @_;
+ return defined(&$word)
+ || eval { my $x = sub { $word }; 1 }
+ || $EVAL_ERROR !~ m/^Bareword/;
+}
+
+# Documentation {{{1
+# ############################################################################
+# I put this last as per the Dog book.
+# ############################################################################
+=pod
+
+=head1 NAME
+
+innotop - MySQL and InnoDB transaction/status monitor.
+
+=head1 SYNOPSIS
+
+To monitor servers normally:
+
+ innotop
+
+To monitor InnoDB status information from a file:
+
+ innotop /var/log/mysql/mysqld.err
+
+To run innotop non-interactively in a pipe-and-filter configuration:
+
+ innotop --count 5 -d 1 -n
+
+To monitor a database on another system using a particular username and password:
+
+ innotop -u <username> -p <password> -h <hostname>
+
+=head1 DESCRIPTION
+
+innotop monitors MySQL servers. Each of its modes shows you a different aspect
+of what's happening in the server. For example, there's a mode for monitoring
+replication, one for queries, and one for transactions. innotop refreshes its
+data periodically, so you see an updating view.
+
+innotop has lots of features for power users, but you can start and run it with
+virtually no configuration. If you're just getting started, see
+L<"QUICK-START">. Press '?' at any time while running innotop for
+context-sensitive help.
+
+=head1 QUICK-START
+
+To start innotop, open a terminal or command prompt. If you have installed
+innotop on your system, you should be able to just type "innotop" and press
+Enter; otherwise, you will need to change to innotop's directory and type "perl
+innotop".
+
+With no options specified, innotop will attempt to connect to a MySQL server on
+localhost using mariadb_read_default_group=client for other connection
+parameters. If you need to specify a different username and password, use the
+-u and -p options, respectively. To monitor a MySQL database on another
+host, use the -h option.
+
+After you've connected, innotop should show you something like the following:
+
+ [RO] Query List (? for help) localhost, 01:11:19, 449.44 QPS, 14/7/163 con/run
+
+ CXN When Load QPS Slow QCacheHit KCacheHit BpsIn BpsOut
+ localhost Total 0.00 1.07k 697 0.00% 98.17% 476.83k 242.83k
+
+ CXN Cmd ID User Host DB Time Query
+ localhost Query 766446598 test 10.0.0.1 foo 00:02 INSERT INTO table (
+
+
+(This sample is truncated at the right so it will fit on a terminal when running
+'man innotop')
+
+If your server is busy, you'll see more output. Notice the first line on the
+screen, which tells you that readonly is set to true ([RO]), what mode you're
+in and what server you're connected to. You can change to other modes with
+keystrokes; press 'T' to switch to a list of InnoDB transactions, for example.
+
+Press the '?' key to see what keys are active in the current mode. You can
+press any of these keys and innotop will either take the requested action or
+prompt you for more input. If your system has Term::ReadLine support, you can
+use TAB and other keys to auto-complete and edit input.
+
+To quit innotop, press the 'q' key.
+
+=head1 OPTIONS
+
+innotop is mostly configured via its configuration file, but some of the
+configuration options can come from the command line. You can also specify a
+file to monitor for InnoDB status output; see L<"MONITORING A FILE"> for more
+details.
+
+You can negate some options by prefixing the option name with --no. For
+example, --noinc (or --no-inc) negates L<"--inc">.
+
+=over
+
+=item --color
+
+Enable or disable terminal coloring. Corresponds to the L<"color"> config file
+setting.
+
+=item --config
+
+Specifies a configuration file to read. This option is non-sticky, that is to
+say it does not persist to the configuration file itself.
+
+=item --count
+
+Refresh only the specified number of times (ticks) before exiting. Each refresh
+is a pause for L<"interval"> seconds, followed by requesting data from MySQL
+connections and printing it to the terminal.
+
+=item --delay
+
+Specifies the amount of time to pause between ticks (refreshes). Corresponds to
+the configuration option L<"interval">.
+
+=item --help
+
+Print a summary of command-line usage and exit.
+
+=item --host
+
+Host to connect to.
+
+=item --inc
+
+Specifies whether innotop should display absolute numbers or relative numbers
+(offsets from their previous values). Corresponds to the configuration option
+L<"status_inc">.
+
+=item --mode
+
+Specifies the mode in which innotop should start. Corresponds to the
+configuration option L<"mode">.
+
+=item --nonint
+
+Enable non-interactive operation. See L<"NON-INTERACTIVE OPERATION"> for more.
+
+=item --password
+
+Password to use for connection.
+
+=item --port
+
+Port to use for connection.
+
+=item --skipcentral
+
+Don't read the central configuration file.
+
+=item --timestamp
+
+In -n mode, write a timestamp either before every screenful of output, or if
+the option is given twice, at the start of every line. The format is controlled
+by the timeformat config variable.
+
+=item --user
+
+User to use for connection.
+
+=item --version
+
+Output version information and exit.
+
+=item --write
+
+Sets the configuration option L<"readonly"> to 0, making innotop write the
+running configuration to ~/.innotop/innotop.conf on exit, if no configuration
+file was loaded at start-up.
+
+=back
+
+=head1 HOTKEYS
+
+innotop is interactive, and you control it with key-presses.
+
+=over
+
+=item *
+
+Uppercase keys switch between modes.
+
+=item *
+
+Lowercase keys initiate some action within the current mode.
+
+=item *
+
+Other keys do something special like change configuration or show the
+innotop license.
+
+=back
+
+Press '?' at any time to see the currently active keys and what they do.
+
+=head1 MODES
+
+Each of innotop's modes retrieves and displays a particular type of data from
+the servers you're monitoring. You switch between modes with uppercase keys.
+The following is a brief description of each mode, in alphabetical order. To
+switch to the mode, press the key listed in front of its heading in the
+following list:
+
+=over
+
+=item A: Health Dashboard
+
+This mode displays a single table with one row per monitored server. The
+columns show essential overview information about the server's health, and
+coloration rules show whether replication is running or if there are any very
+long-running queries or excessive replication delay.
+
+=item B: InnoDB Buffers
+
+This mode displays information about the InnoDB buffer pool, page statistics,
+insert buffer, and adaptive hash index. The data comes from SHOW INNODB STATUS.
+
+This mode contains the L<"buffer_pool">, L<"page_statistics">,
+L<"insert_buffers">, and L<"adaptive_hash_index"> tables by default.
+
+=item C: Command Summary
+
+This mode is similar to mytop's Command Summary mode. It shows the
+L<"cmd_summary"> table, which looks something like the following:
+
+ Command Summary (? for help) localhost, 25+07:16:43, 2.45 QPS, 3 thd, 5.0.40
+ _____________________ Command Summary _____________________
+ Name Value Pct Last Incr Pct
+ Select_scan 3244858 69.89% 2 100.00%
+ Select_range 1354177 29.17% 0 0.00%
+ Select_full_join 39479 0.85% 0 0.00%
+ Select_full_range_join 4097 0.09% 0 0.00%
+ Select_range_check 0 0.00% 0 0.00%
+
+The command summary table is built by extracting variables from
+L<"STATUS_VARIABLES">. The variables must be numeric and must match the prefix
+given by the L<"cmd_filter"> configuration variable. The variables are then
+sorted by value descending and compared to the last variable, as shown above.
+The percentage columns are percentage of the total of all variables in the
+table, so you can see the relative weight of the variables.
+
+The example shows what you see if the prefix is "Select_". The default
+prefix is "Com_". You can choose a prefix with the 's' key.
+
+It's rather like running SHOW VARIABLES LIKE "prefix%" with memory and
+nice formatting.
+
+Values are aggregated across all servers. The Pct columns are not correctly
+aggregated across multiple servers. This is a known limitation of the grouping
+algorithm that may be fixed in the future.
+
+=item D: InnoDB Deadlocks
+
+This mode shows the transactions involved in the last InnoDB deadlock. A second
+table shows the locks each transaction held and waited for. A deadlock is
+caused by a cycle in the waits-for graph, so there should be two locks held and
+one waited for unless the deadlock information is truncated.
+
+InnoDB puts deadlock information before some other information in the SHOW
+INNODB STATUS output. If there are a lot of locks, the deadlock information can
+grow very large, and there is a limit on the size of the SHOW INNODB
+STATUS output. A large deadlock can fill the entire output, or even be
+truncated, and prevent you from seeing other information at all. If you are
+running innotop in another mode, for example T mode, and suddenly you don't see
+anything, you might want to check and see if a deadlock has wiped out the data
+you need.
+
+If it has, you can create a small deadlock to replace the large one. Use the
+'w' key to 'wipe' the large deadlock with a small one. This will not work
+unless you have defined a deadlock table for the connection (see L<"SERVER
+CONNECTIONS">).
+
+You can also configure innotop to automatically detect when a large deadlock
+needs to be replaced with a small one (see L<"auto_wipe_dl">).
+
+This mode displays the L<"deadlock_transactions"> and L<"deadlock_locks"> tables
+by default.
+
+=item F: InnoDB Foreign Key Errors
+
+This mode shows the last InnoDB foreign key error information, such as the
+table where it happened, when and who and what query caused it, and so on.
+
+InnoDB has a huge variety of foreign key error messages, and many of them are
+just hard to parse. innotop doesn't always do the best job here, but there's
- MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
++so much code devoted to parsing this messy, unparsable output that innotop is
+likely never to be perfect in this regard. If innotop doesn't show you what
+you need to see, just look at the status text directly.
+
+This mode displays the L<"fk_error"> table by default.
+
+=item I: InnoDB I/O Info
+
+This mode shows InnoDB's I/O statistics, including the I/O threads, pending I/O,
+file I/O miscellaneous, and log statistics. It displays the L<"io_threads">,
+L<"pending_io">, L<"file_io_misc">, and L<"log_statistics"> tables by default.
+
+=item K: InnoDB Lock Waits
+
+This mode shows information from InnoDB plugin's transaction and locking tables.
+You can use it to find when a transaction is waiting for another, and kill the
+blocking transaction. It displays the L<"innodb_blocked_blocker>" table.
+
+=item L: Locks
+
+This mode shows information about current locks. At the moment only InnoDB
+locks are supported, and by default you'll only see locks for which transactions
+are waiting. This information comes from the TRANSACTIONS section of the InnoDB
+status text. If you have a very busy server, you may have frequent lock waits;
+it helps to be able to see which tables and indexes are the "hot spot" for
+locks. If your server is running pretty well, this mode should show nothing.
+
+You can configure MySQL and innotop to monitor not only locks for which a
+transaction is waiting, but those currently held, too. You can do this with the
+InnoDB Lock Monitor (L<http://dev.mysql.com/doc/en/innodb-monitor.html>). It's
+not documented in the MySQL manual, but creating the lock monitor with the
+following statement also affects the output of SHOW INNODB STATUS, which innotop
+uses:
+
+ CREATE TABLE innodb_lock_monitor(a int) ENGINE=INNODB;
+
+This causes InnoDB to print its output to the MySQL file every 16 seconds or so,
+as stated in the manual, but it also makes the normal SHOW INNODB STATUS output
+include lock information, which innotop can parse and display (that's the
+undocumented feature).
+
+This means you can do what may have seemed impossible: to a limited extent
+(InnoDB truncates some information in the output), you can see which transaction
+holds the locks something else is waiting for. You can also enable and disable
+the InnoDB Lock Monitor with the key mappings in this mode.
+
+This mode displays the L<"innodb_locks"> table by default. Here's a sample of
+the screen when one connection is waiting for locks another connection holds:
+
+ _________________________________ InnoDB Locks __________________________
+ CXN ID Type Waiting Wait Active Mode DB Table Index
+ localhost 12 RECORD 1 00:10 00:10 X test t1 PRIMARY
+ localhost 12 TABLE 0 00:10 00:10 IX test t1
+ localhost 12 RECORD 1 00:10 00:10 X test t1 PRIMARY
+ localhost 11 TABLE 0 00:00 00:25 IX test t1
+ localhost 11 RECORD 0 00:00 00:25 X test t1 PRIMARY
+
+You can see the first connection, ID 12, is waiting for a lock on the PRIMARY
+key on test.t1, and has been waiting for 10 seconds. The second connection
+isn't waiting, because the Waiting column is 0, but it holds locks on the same
+index. That tells you connection 11 is blocking connection 12.
+
+=item M: Master/Slave Replication Status
+
+This mode shows the output of SHOW SLAVE STATUS and SHOW MASTER STATUS in three
+tables. The first two divide the slave's status into SQL and I/O thread status,
+and the last shows master status. Filters are applied to eliminate non-slave
+servers from the slave tables, and non-master servers from the master table.
+
+This mode displays the L<"slave_sql_status">, L<"slave_io_status">, and
+L<"master_status"> tables by default.
+
+=item O: Open Tables
+
+This section comes from MySQL's SHOW OPEN TABLES command. By default it is
+filtered to show tables which are in use by one or more queries, so you can
+get a quick look at which tables are 'hot'. You can use this to guess which
+tables might be locked implicitly.
+
+This mode displays the L<"open_tables"> mode by default.
+
+=item U: User Statistics
+
+This mode displays data that's available in Percona's enhanced version of MySQL
+(also known as Percona Server with XtraDB). Specifically, it makes it easy to
+enable and disable the so-called "user statistics." This feature gathers stats
+on clients, threads, users, tables, and indexes and makes them available as
+INFORMATION_SCHEMA tables. These are invaluable for understanding what your
+server is doing. They are also available in MariaDB.
+
+The statistics supported so far are only from the TABLE_STATISTICS and
+INDEX_STATISTICS tables added by Percona. There are three views: one of table stats,
+one of index stats (which can be aggregated with the = key), and one of both.
+
+The server doesn't gather these stats by default. You have to set the variable
+userstat_running to turn it on. You can do this easily with innotop from U mode,
+with the 's' key.
+
+=item Q: Query List
+
+This mode displays the output from SHOW FULL PROCESSLIST, much like B<mytop>'s
+query list mode. This mode does B<not> show InnoDB-related information. This
+is probably one of the most useful modes for general usage.
+
+There is an informative header that shows general status information about
+your server. You can toggle it on and off with the 'h' key. By default,
+innotop hides inactive processes and its own process. You can toggle these on
+and off with the 'i' and 'a' keys.
+
+You can EXPLAIN a query from this mode with the 'e' key. This displays the
+query's full text, the results of EXPLAIN, and in newer MySQL versions, even
+the optimized query resulting from EXPLAIN EXTENDED. innotop also tries to
+rewrite certain queries to make them EXPLAIN-able. For example, INSERT/SELECT
+statements are rewritable.
+
+This mode displays the L<"q_header"> and L<"processlist"> tables by default.
+
+=item R: InnoDB Row Operations and Semaphores
+
+This mode shows InnoDB row operations, row operation miscellaneous, semaphores,
+and information from the wait array. It displays the L<"row_operations">,
+L<"row_operation_misc">, L<"semaphores">, and L<"wait_array"> tables by default.
+
+=item S: Variables & Status
+
+This mode calculates statistics, such as queries per second, and prints them out
+in several different styles. You can show absolute values, or incremental values
+between ticks.
+
+You can switch between the views by pressing a key. The 's' key prints a
+single line each time the screen updates, in the style of B<vmstat>. The 'g'
+key changes the view to a graph of the same numbers, sort of like B<tload>.
+The 'v' key changes the view to a pivoted table of variable names on the left,
+with successive updates scrolling across the screen from left to right. You can
+choose how many updates to put on the screen with the L<"num_status_sets">
+configuration variable.
+
+Headers may be abbreviated to fit on the screen in interactive operation. You
+choose which variables to display with the 'c' key, which selects from
+predefined sets, or lets you create your own sets. You can edit the current set
+with the 'e' key.
+
+This mode doesn't really display any tables like other modes. Instead, it uses
+a table definition to extract and format the data, but it then transforms the
+result in special ways before outputting it. It uses the L<"var_status"> table
+definition for this.
+
+=item T: InnoDB Transactions
+
+This mode shows transactions from the InnoDB monitor's output, in B<top>-like
+format. This mode is the reason I wrote innotop.
+
+You can kill queries or processes with the 'k' and 'x' keys, and EXPLAIN a query
+with the 'e' or 'f' keys. InnoDB doesn't print the full query in transactions,
+so explaining may not work right if the query is truncated.
+
+The informational header can be toggled on and off with the 'h' key. By
+default, innotop hides inactive transactions and its own transaction. You can
+toggle this on and off with the 'i' and 'a' keys.
+
+This mode displays the L<"t_header"> and L<"innodb_transactions"> tables by
+default.
+
+=back
+
+=head1 INNOTOP STATUS
+
+The first line innotop displays is a "status bar" of sorts. What it contains
+depends on the mode you're in, and what servers you're monitoring. The first
+few words are always [RO] (if readonly is set to 1), the innotop mode, such as
+"InnoDB Txns" for T mode, followed by a reminder to press '?' for help at any
+time.
+
+=head2 ONE SERVER
+
+The simplest case is when you're monitoring a single server. In this case, the
+name of the connection is next on the status line. This is the name you gave
+when you created the connection -- most likely the MySQL server's hostname.
+This is followed by the server's uptime.
+
+If you're in an InnoDB mode, such as T or B, the next word is "InnoDB" followed
+by some information about the SHOW INNODB STATUS output used to render the
+screen. The first word is the number of seconds since the last SHOW INNODB
+STATUS, which InnoDB uses to calculate some per-second statistics. The next is
+a smiley face indicating whether the InnoDB output is truncated. If the smiley
+face is a :-), all is well; there is no truncation. A :^| means the transaction
+list is so long, InnoDB has only printed out some of the transactions. Finally,
+a frown :-( means the output is incomplete, which is probably due to a deadlock
+printing too much lock information (see L<"D: InnoDB Deadlocks">).
+
+The next two words indicate the server's queries per second (QPS) and how many
+threads (connections) exist. Finally, the server's version number is the last
+thing on the line.
+
+=head2 MULTIPLE SERVERS
+
+If you are monitoring multiple servers (see L<"SERVER CONNECTIONS">), the status
+line does not show any details about individual servers. Instead, it shows the
+names of the connections that are active. Again, these are connection names you
+specified, which are likely to be the server's hostname. A connection that has
+an error is prefixed with an exclamation point.
+
+If you are monitoring a group of servers (see L<"SERVER GROUPS">), the status
+line shows the name of the group. If any connection in the group has an
+error, the group's name is followed by the fraction of the connections that
+don't have errors.
+
+See L<"ERROR HANDLING"> for more details about innotop's error handling.
+
+=head2 MONITORING A FILE
+
+If you give a filename on the command line, innotop will not connect to ANY
+servers at all. It will watch the specified file for InnoDB status output and
+use that as its data source. It will always show a single connection called
+'file'. And since it can't connect to a server, it can't determine how long the
+server it's monitoring has been up; so it calculates the server's uptime as time
+since innotop started running.
+
+=head1 SERVER ADMINISTRATION
+
+While innotop is primarily a monitor that lets you watch and analyze your
+servers, it can also send commands to servers. The most frequently useful
+commands are killing queries and stopping or starting slaves.
+
+You can kill a connection, or in newer versions of MySQL kill a query but not a
+connection, from L<"Q: Query List"> and L<"T: InnoDB Transactions"> modes.
+Press 'k' to issue a KILL command, or 'x' to issue a KILL QUERY command.
+innotop will prompt you for the server and/or connection ID to kill (innotop
+does not prompt you if there is only one possible choice for any input).
+innotop pre-selects the longest-running query, or the oldest connection.
+Confirm the command with 'y'.
+
+In L<"M: Master/Slave Replication Status"> mode, you can start and stop slaves
+with the 'a' and 'o' keys, respectively. You can send these commands to many
+slaves at once. innotop fills in a default command of START SLAVE or STOP SLAVE
+for you, but you can actually edit the command and send anything you wish, such
+as SET GLOBAL SQL_SLAVE_SKIP_COUNTER=1 to make the slave skip one binlog event
+when it starts.
+
+You can also ask innotop to calculate the earliest binlog in use by any slave
+and issue a PURGE MASTER LOGS on the master. Use the 'b' key for this. innotop
+will prompt you for a master to run the command on, then prompt you for the
+connection names of that master's slaves (there is no way for innotop to
+determine this reliably itself). innotop will find the minimum binlog in use by
+these slave connections and suggest it as the argument to PURGE MASTER LOGS.
+
+in L<"U: User Statistics"> mode, you can use the 's' key to start and stop
+the collection of the statistics data for TABLE_STATISTICS and similar.
+
+=head1 SERVER CONNECTIONS
+
+When you create a server connection using '@', innotop asks you for a series of
+inputs, as follows:
+
+=over
+
+=item DSN
+
+A DSN is a Data Source Name, which is the initial argument passed to the DBI
+module for connecting to a server. It is usually of the form
+
+ DBI:MariaDB:;mariadb_read_default_group=mysql;host=HOSTNAME
+
+Since this DSN is passed to the DBD::MariaDB driver, you should read the driver's
+documentation at L<https://metacpan.org/pod/DBD::MariaDB> for
+the exact details on all the options you can pass the driver in the DSN. You
+can read more about DBI at L<http://dbi.perl.org/docs/>, and especially at
+L<http://search.cpan.org/~timb/DBI/DBI.pm>.
+
+The mariadb_read_default_group=mysql option lets the DBD driver read your MySQL
+options files, such as ~/.my.cnf on UNIX-ish systems. You can use this to avoid
+specifying a username or password for the connection.
+
+=item InnoDB Deadlock Table
+
+This optional item tells innotop a table name it can use to deliberately create
+a small deadlock (see L<"D: InnoDB Deadlocks">). If you specify this option,
+you just need to be sure the table doesn't exist, and that innotop can create
+and drop the table with the InnoDB storage engine. You can safely omit or just
+accept the default if you don't intend to use this.
+
+=item Username
+
+innotop will ask you if you want to specify a username. If you say 'y', it will
+then prompt you for a user name. If you have a MySQL option file that specifies
+your username, you don't have to specify a username.
+
+The username defaults to your login name on the system you're running innotop on.
+
+=item Password
+
+innotop will ask you if you want to specify a password. Like the username, the
+password is optional, but there's an additional prompt that asks if you want to
+save the password in the innotop configuration file. If you don't save it in
+the configuration file, innotop will prompt you for a password each time it
+starts. Passwords in the innotop configuration file are saved in plain text,
+not encrypted in any way.
+
+=back
+
+Once you finish answering these questions, you should be connected to a server.
+But innotop isn't limited to monitoring a single server; you can define many
+server connections and switch between them by pressing the '@' key. See
+L<"SWITCHING BETWEEN CONNECTIONS">.
+
+=head1 SERVER GROUPS
+
+If you have multiple MySQL instances, you can put them into named groups, such
+as 'all', 'masters', and 'slaves', which innotop can monitor all together.
+
+You can choose which group to monitor with the '#' key, and you can press the
+TAB key to switch to the next group. If you're not currently monitoring a
+group, pressing TAB selects the first group.
+
+To create a group, press the '#' key and type the name of your new group, then
+type the names of the connections you want the group to contain.
+
+=head1 SWITCHING BETWEEN CONNECTIONS
+
+innotop lets you quickly switch which servers you're monitoring. The most basic
+way is by pressing the '@' key and typing the name(s) of the connection(s) you
+want to use. This setting is per-mode, so you can monitor different connections
+in each mode, and innotop remembers which connections you choose.
+
+You can quickly switch to the 'next' connection in alphabetical order with the
+'n' key. If you're monitoring a server group (see L<"SERVER GROUPS">) this will
+switch to the first connection.
+
+You can also type many connection names, and innotop will fetch and display data
+from them all. Just separate the connection names with spaces, for example
+"server1 server2." Again, if you type the name of a connection that doesn't
+exist, innotop will prompt you for connection information and create the
+connection.
+
+Another way to monitor multiple connections at once is with server groups. You
+can use the TAB key to switch to the 'next' group in alphabetical order, or if
+you're not monitoring any groups, TAB will switch to the first group.
+
+innotop does not fetch data in parallel from connections, so if you are
+monitoring a large group or many connections, you may notice increased delay
+between ticks.
+
+When you monitor more than one connection, innotop's status bar changes. See
+L<"INNOTOP STATUS">.
+
+=head1 ERROR HANDLING
+
+Error handling is not that important when monitoring a single connection, but is
+crucial when you have many active connections. A crashed server or lost
+connection should not crash innotop. As a result, innotop will continue to run
+even when there is an error; it just won't display any information from the
+connection that had an error. Because of this, innotop's behavior might confuse
+you. It's a feature, not a bug!
+
+innotop does not continue to query connections that have errors, because they
+may slow innotop and make it hard to use, especially if the error is a problem
+connecting and causes a long time-out. Instead, innotop retries the connection
+occasionally to see if the error still exists. If so, it will wait until some
+point in the future. The wait time increases in ticks as the Fibonacci series,
+so it tries less frequently as time passes.
+
+Since errors might only happen in certain modes because of the SQL commands
+issued in those modes, innotop keeps track of which mode caused the error. If
+you switch to a different mode, innotop will retry the connection instead of
+waiting.
+
+By default innotop will display the problem in red text at the bottom of the
+first table on the screen. You can disable this behavior with the
+L<"show_cxn_errors_in_tbl"> configuration option, which is enabled by default.
+If the L<"debug"> option is enabled, innotop will display the error at the
+bottom of every table, not just the first. And if L<"show_cxn_errors"> is
+enabled, innotop will print the error text to STDOUT as well. Error messages
+might only display in the mode that caused the error, depending on the mode and
+whether innotop is avoiding querying that connection.
+
+=head1 NON-INTERACTIVE OPERATION
+
+You can run innotop in non-interactive mode, in which case it is entirely
+controlled from the configuration file and command-line options. To start
+innotop in non-interactive mode, give the L"<--nonint"> command-line option.
+This changes innotop's behavior in the following ways:
+
+=over
+
+=item *
+
+Certain Perl modules are not loaded. Term::Readline is not loaded, since
+innotop doesn't prompt interactively. Term::ANSIColor and Win32::Console::ANSI
+modules are not loaded. Term::ReadKey is still used, since innotop may have to
+prompt for connection passwords when starting up.
+
+=item *
+
+innotop does not clear the screen after each tick.
+
+=item *
+
+innotop does not persist any changes to the configuration file.
+
+=item *
+
+If L<"--count"> is given and innotop is in incremental mode (see L<"status_inc">
+and L<"--inc">), innotop actually refreshes one more time than specified so it
+can print incremental statistics. This suppresses output during the first
+tick, so innotop may appear to hang.
+
+=item *
+
+innotop only displays the first table in each mode. This is so the output can
+be easily processed with other command-line utilities such as awk and sed. To
+change which tables display in each mode, see L<"TABLES">. Since L<"Q: Query
+List"> mode is so important, innotop automatically disables the L<"q_header">
+table. This ensures you'll see the L<"processlist"> table, even if you have
+innotop configured to show the q_header table during interactive operation.
+Similarly, in L<"T: InnoDB Transactions"> mode, the L<"t_header"> table is
+suppressed so you see only the L<"innodb_transactions"> table.
+
+=item *
+
+All output is tab-separated instead of being column-aligned with whitespace, and
+innotop prints the full contents of each table instead of only printing one
+screenful at a time.
+
+=item *
+
+innotop only prints column headers once instead of every tick (see
+L<"hide_hdr">). innotop does not print table captions (see
+L<"display_table_captions">). innotop ensures there are no empty lines in the
+output.
+
+=item *
+
+innotop does not honor the L<"shorten"> transformation, which normally shortens
+some numbers to human-readable formats.
+
+=item *
+
+innotop does not print a status line (see L<"INNOTOP STATUS">).
+
+=back
+
+=head1 CONFIGURING
+
+Nearly everything about innotop is configurable. Most things are possible to
+change with built-in commands, but you can also edit the configuration file.
+
+While running innotop, press the '$' key to bring up the configuration editing
+dialog. Press another key to select the type of data you want to edit:
+
+=over
+
+=item S: Statement Sleep Times
+
+Edits SQL statement sleep delays, which make innotop pause for the specified
+amount of time after executing a statement. See L<"SQL STATEMENTS"> for a
+definition of each statement and what it does. By default innotop does not
+delay after any statements.
+
+This feature is included so you can customize the side-effects caused by
+monitoring your server. You may not see any effects, but some innotop users
+have noticed that certain MySQL versions under very high load with InnoDB
+enabled take longer than usual to execute SHOW GLOBAL STATUS. If innotop calls
+SHOW FULL PROCESSLIST immediately afterward, the processlist contains more
+queries than the machine actually averages at any given moment. Configuring
+innotop to pause briefly after calling SHOW GLOBAL STATUS alleviates this
+effect.
+
+Sleep times are stored in the L<"stmt_sleep_times"> section of the configuration
+file. Fractional-second sleeps are supported, subject to your hardware's
+limitations.
+
+=item c: Edit Columns
+
+Starts the table editor on one of the displayed tables. See L<"TABLE EDITOR">.
+An alternative way to start the table editor without entering the configuration
+dialog is with the '^' key.
+
+=item g: General Configuration
+
+Starts the configuration editor to edit global and mode-specific configuration
+variables (see L<"MODES">). innotop prompts you to choose a variable from among
+the global and mode-specific ones depending on the current mode.
+
+=item k: Row-Coloring Rules
+
+Starts the row-coloring rules editor on one of the displayed table(s). See
+L<"COLORS"> for details.
+
+=item p: Manage Plugins
+
+Starts the plugin configuration editor. See L<"PLUGINS"> for details.
+
+=item s: Server Groups
+
+Lets you create and edit server groups. See L<"SERVER GROUPS">.
+
+=item t: Choose Displayed Tables
+
+Lets you choose which tables to display in this mode. See L<"MODES"> and
+L<"TABLES">.
+
+=back
+
+=head1 CONFIGURATION FILE
+
+innotop's default configuration file locations are $HOME/.innotop and
+/etc/innotop/innotop.conf, and they are looked for in that order. If the first
+configuration file exists, the second will not be processed. Those can be
+overridden with the L<"--config"> command-line option. You can edit it by hand
+safely, however innotop reads the configuration file when it starts, and, if
+readonly is set to 0, writes it out again when it exits. Thus, if readonly is
+set to 0, any changes you make by hand while innotop is running will be lost.
+
+innotop doesn't store its entire configuration in the configuration file. It
+has a huge set of default configuration values that it holds only in memory,
+and the configuration file only overrides these defaults. When you customize a
+default setting, innotop notices, and then stores the customizations into the
+file. This keeps the file size down, makes it easier to edit, and makes
+upgrades easier.
+
+A configuration file is read-only be default. You can override that with
+L<"--write">. See L<"readonly">.
+
+The configuration file is arranged into sections like an INI file. Each
+section begins with [section-name] and ends with [/section-name]. Each
+section's entries have a different syntax depending on the data they need to
+store. You can put comments in the file; any line that begins with a #
+character is a comment. innotop will not read the comments, so it won't write
+them back out to the file when it exits. Comments in read-only configuration
+files are still useful, though.
+
+The first line in the file is innotop's version number. This lets innotop
+notice when the file format is not backwards-compatible, and upgrade smoothly
+without destroying your customized configuration.
+
+The following list describes each section of the configuration file and the data
+it contains:
+
+=over
+
+=item general
+
+The 'general' section contains global configuration variables and variables that
+may be mode-specific, but don't belong in any other section. The syntax is a
+simple key=value list. innotop writes a comment above each value to help you
+edit the file by hand.
+
+=over
+
+=item S_func
+
+Controls S mode presentation (see L<"S: Variables & Status">). If g, values are
+graphed; if s, values are like vmstat; if p, values are in a pivoted table.
+
+=item S_set
+
+Specifies which set of variables to display in L<"S: Variables & Status"> mode.
+See L<"VARIABLE SETS">.
+
+=item auto_wipe_dl
+
+Instructs innotop to automatically wipe large deadlocks when it notices them.
+When this happens you may notice a slight delay. At the next tick, you will
+usually see the information that was being truncated by the large deadlock.
+
+=item charset
+
+Specifies what kind of characters to allow through the L<"no_ctrl_char">
+transformation. This keeps non-printable characters from confusing a
+terminal when you monitor queries that contain binary data, such as images.
+
+The default is 'ascii', which considers anything outside normal ASCII to be a
+control character. The other allowable values are 'unicode' and 'none'. 'none'
+considers every character a control character, which can be useful for
+collapsing ALL text fields in queries.
+
+=item cmd_filter
+
+This is the prefix that filters variables in L<"C: Command Summary"> mode.
+
+=item color
+
+Whether terminal coloring is permitted.
+
+=item cxn_timeout
+
+On MySQL versions 4.0.3 and newer, this variable is used to set the connection's
+timeout, so MySQL doesn't close the connection if it is not used for a while.
+This might happen because a connection isn't monitored in a particular mode, for
+example.
+
+=item debug
+
+This option enables more verbose errors and makes innotop more strict in some
+places. It can help in debugging filters and other user-defined code. It also
+makes innotop write a lot of information to L<"debugfile"> when there is a
+crash.
+
+=item debugfile
+
+A file to which innotop will write information when there is a crash. See
+L<"FILES">.
+
+=item display_table_captions
+
+innotop displays a table caption above most tables. This variable suppresses or
+shows captions on all tables globally. Some tables are configured with the
+hide_caption property, which overrides this.
+
+=item global
+
+Whether to show GLOBAL variables and status. innotop only tries to do this on
+servers which support the GLOBAL option to SHOW VARIABLES and SHOW STATUS. In
+some MySQL versions, you need certain privileges to do this; if you don't have
+them, innotop will not be able to fetch any variable and status data. This
+configuration variable lets you run innotop and fetch what data you can even
+without the elevated privileges.
+
+I can no longer find or reproduce the situation where GLOBAL wasn't allowed, but
+I know there was one.
+
+=item graph_char
+
+Defines the character to use when drawing graphs in L<"S: Variables & Status">
+mode.
+
+=item header_highlight
+
+Defines how to highlight column headers. This only works if Term::ANSIColor is
+available. Valid values are 'bold' and 'underline'.
+
+=item hide_hdr
+
+Hides column headers globally.
+
+=item interval
+
+The interval at which innotop will refresh its data (ticks). The interval is
+implemented as a sleep time between ticks, so the true interval will vary
+depending on how long it takes innotop to fetch and render data.
+
+This variable accepts fractions of a second.
+
+=item mode
+
+The mode in which innotop should start. Allowable arguments are the same as the
+key presses that select a mode interactively. See L<"MODES">.
+
+=item num_digits
+
+How many digits to show in fractional numbers and percents. This variable's
+range is between 0 and 9 and can be set directly from L<"S: Variables & Status">
+mode with the '+' and '-' keys. It is used in the L<"set_precision">,
+L<"shorten">, and L<"percent"> transformations.
+
+=item num_status_sets
+
+Controls how many sets of status variables to display in pivoted L<"S: Variables
+& Status"> mode. It also controls the number of old sets of variables innotop
+keeps in its memory, so the larger this variable is, the more memory innotop
+uses.
+
+=item plugin_dir
+
+Specifies where plugins can be found. By default, innotop stores plugins in the
+'plugins' subdirectory of your innotop configuration directory.
+
+=item readonly
+
+Whether the configuration file is readonly. This cannot be set interactively.
+
+=item show_cxn_errors
+
+Makes innotop print connection errors to STDOUT. See L<"ERROR HANDLING">.
+
+=item show_cxn_errors_in_tbl
+
+Makes innotop display connection errors as rows in the first table on screen.
+See L<"ERROR HANDLING">.
+
+=item show_percent
+
+Adds a '%' character after the value returned by the L<"percent">
+transformation.
+
+=item show_statusbar
+
+Controls whether to show the status bar in the display. See L<"INNOTOP
+STATUS">.
+
+=item skip_innodb
+
+Disables fetching SHOW INNODB STATUS, in case your server(s) do not have InnoDB
+enabled and you don't want innotop to try to fetch it. This can also be useful
+when you don't have the SUPER privilege, required to run SHOW INNODB STATUS.
+
+=item spark
+
+Specifies how wide a spark chart is. There are two ASCII spark charts in A
+mode, showing QPS and User_threads_running.
+
+=item status_inc
+
+Whether to show absolute or incremental values for status variables.
+Incremental values are calculated as an offset from the last value innotop saw
+for that variable. This is a global setting, but will probably become
+mode-specific at some point. Right now it is honored a bit inconsistently; some
+modes don't pay attention to it.
+
+=item timeformat
+
+The C-style strftime()-compatible format for the timestamp line to be printed
+in -n mode when -t is set.
+
+=back
+
+=item plugins
+
+This section holds a list of package names of active plugins. If the plugin
+exists, innotop will activate it. See L<"PLUGINS"> for more information.
+
+=item filters
+
+This section holds user-defined filters (see L<"FILTERS">). Each line is in the
+format filter_name=text='filter text' tbls='table list'.
+
+The filter text is the text of the subroutine's code. The table list is a list
+of tables to which the filter can apply. By default, user-defined filters apply
+to the table for which they were created, but you can manually override that by
+editing the definition in the configuration file.
+
+=item active_filters
+
+This section stores which filters are active on each table. Each line is in the
+format table_name=filter_list.
+
+=item tbl_meta
+
+This section stores user-defined or user-customized columns (see L<"COLUMNS">).
+Each line is in the format col_name=properties, where the properties are a
+name=quoted-value list.
+
+=item connections
+
+This section holds the server connections you have defined. Each line is in
+the format name=properties, where the properties are a name=value list. The
+properties are self-explanatory, and the only one that is treated specially is
+'pass' which is only present if 'savepass' is set. This section of the
+configuration file will be skipped if any DSN, username, or password
+command-line options are used. See L<"SERVER CONNECTIONS">.
+
+=item active_connections
+
+This section holds a list of which connections are active in each mode. Each
+line is in the format mode_name=connection_list.
+
+=item server_groups
+
+This section holds server groups. Each line is in the format
+name=connection_list. See L<"SERVER GROUPS">.
+
+=item active_server_groups
+
+This section holds a list of which server group is active in each mode. Each
+line is in the format mode_name=server_group.
+
+=item max_values_seen
+
+This section holds the maximum values seen for variables. This is used to scale
+the graphs in L<"S: Variables & Status"> mode. Each line is in the format
+name=value.
+
+=item active_columns
+
+This section holds table column lists. Each line is in the format
+tbl_name=column_list. See L<"COLUMNS">.
+
+=item sort_cols
+
+This section holds the sort definition. Each line is in the format
+tbl_name=column_list. If a column is prefixed with '-', that column sorts
+descending. See L<"SORTING">.
+
+=item visible_tables
+
+This section defines which tables are visible in each mode. Each line is in the
+format mode_name=table_list. See L<"TABLES">.
+
+=item varsets
+
+This section defines variable sets for use in L<"S: Status & Variables"> mode.
+Each line is in the format name=variable_list. See L<"VARIABLE SETS">.
+
+=item colors
+
+This section defines colorization rules. Each line is in the format
+tbl_name=property_list. See L<"COLORS">.
+
+=item stmt_sleep_times
+
+This section contains statement sleep times. Each line is in the format
+statement_name=sleep_time. See L<"S: Statement Sleep Times">.
+
+=item group_by
+
+This section contains column lists for table group_by expressions. Each line is
+in the format tbl_name=column_list. See L<"GROUPING">.
+
+=back
+
+=head1 CUSTOMIZING
+
+You can customize innotop a great deal. For example, you can:
+
+=over
+
+=item *
+
+Choose which tables to display, and in what order.
+
+=item *
+
+Choose which columns are in those tables, and create new columns.
+
+=item *
+
+Filter which rows display with built-in filters, user-defined filters, and
+quick-filters.
+
+=item *
+
+Sort the rows to put important data first or group together related rows.
+
+=item *
+
+Highlight rows with color.
+
+=item *
+
+Customize the alignment, width, and formatting of columns, and apply
+transformations to columns to extract parts of their values or format the values
+as you wish (for example, shortening large numbers to familiar units).
+
+=item *
+
+Design your own expressions to extract and combine data as you need. This gives
+you unlimited flexibility.
+
+=back
+
+All these and more are explained in the following sections.
+
+=head2 TABLES
+
+A table is what you'd expect: a collection of columns. It also has some other
+properties, such as a caption. Filters, sorting rules, and colorization rules
+belong to tables and are covered in later sections.
+
+Internally, table meta-data is defined in a data structure called %tbl_meta.
+This hash holds all built-in table definitions, which contain a lot of default
+instructions to innotop. The meta-data includes the caption, a list of columns
+the user has customized, a list of columns, a list of visible columns, a list of
+filters, color rules, a sort-column list, sort direction, and some information
+about the table's data sources. Most of this is customizable via the table
+editor (see L<"TABLE EDITOR">).
+
+You can choose which tables to show by pressing the '$' key. See L<"MODES"> and
+L<"TABLES">.
+
+The table life-cycle is as follows:
+
+=over
+
+=item *
+
+Each table begins with a data source, which is an array of hashes. See below
+for details on data sources.
+
+=item *
+
+Each element of the data source becomes a row in the final table.
+
+=item *
+
+For each element in the data source, innotop extracts values from the source and
+creates a row. This row is another hash, which later steps will refer to as
+$set. The values innotop extracts are determined by the table's columns. Each
+column has an extraction subroutine, compiled from an expression (see
+L<"EXPRESSIONS">). The resulting row is a hash whose keys are named the same as
+the column name.
+
+=item *
+
+innotop filters the rows, removing those that don't need to be displayed. See
+L<"FILTERS">.
+
+=item *
+
+innotop sorts the rows. See L<"SORTING">.
+
+=item *
+
+innotop groups the rows together, if specified. See L<"GROUPING">.
+
+=item *
+
+innotop colorizes the rows. See L<"COLORS">.
+
+=item *
+
+innotop transforms the column values in each row. See L<"TRANSFORMATIONS">.
+
+=item *
+
+innotop optionally pivots the rows (see L<"PIVOTING">), then filters and sorts
+them.
+
+=item *
+
+innotop formats and justifies the rows as a table. During this step, innotop
+applies further formatting to the column values, including alignment, maximum
+and minimum widths. innotop also does final error checking to ensure there are
+no crashes due to undefined values. innotop then adds a caption if specified,
+and the table is ready to print.
+
+=back
+
+The lifecycle is slightly different if the table is pivoted, as noted above. To
+clarify, if the table is pivoted, the process is extract, group, transform,
+pivot, filter, sort, create. If it's not pivoted, the process is extract,
+filter, sort, group, color, transform, create. This slightly convoluted process
+doesn't map all that well to SQL, but pivoting complicates things pretty
+thoroughly. Roughly speaking, filtering and sorting happen as late as needed to
+effect the final result as you might expect, but as early as possible for
+efficiency.
+
+Each built-in table is described below:
+
+=over
+
+=item adaptive_hash_index
+
+Displays data about InnoDB's adaptive hash index. Data source:
+L<"STATUS_VARIABLES">.
+
+=item buffer_pool
+
+Displays data about InnoDB's buffer pool. Data source: L<"STATUS_VARIABLES">.
+
+=item cmd_summary
+
+Displays weighted status variables. Data source: L<"STATUS_VARIABLES">.
+
+=item deadlock_locks
+
+Shows which locks were held and waited for by the last detected deadlock. Data
+source: L<"DEADLOCK_LOCKS">.
+
+=item deadlock_transactions
+
+Shows transactions involved in the last detected deadlock. Data source:
+L<"DEADLOCK_TRANSACTIONS">.
+
+=item explain
+
+Shows the output of EXPLAIN. Data source: L<"EXPLAIN">.
+
+=item file_io_misc
+
+Displays data about InnoDB's file and I/O operations. Data source:
+L<"STATUS_VARIABLES">.
+
+=item fk_error
+
+Displays various data about InnoDB's last foreign key error. Data source:
+L<"STATUS_VARIABLES">.
+
+=item health_dashboard
+
+Displays an overall summary of servers, one server per line, for monitoring.
+Data source: L<"STATUS_VARIABLES">, L<"MASTER_SLAVE">, L<"PROCESSLIST_STATS">.
+
+=item index_statistics
+
+Displays data from the INDEX_STATISTICS table in Percona-enhanced servers.
+
+=item index_table_statistics
+
+Displays data from the INDEX_STATISTICS and TABLE_STATISTICS tables in
+Percona-enhanced servers. It joins the two together, grouped by the database
+and table name. It is the default view in L<"U: User Statistics"> mode,
+and makes it easy to see what tables are hot, how many rows are read from indexes,
+how many changes are made, and how many changes are made to indexes.
+
+=item innodb_blocked_blocker
+
+Displays InnoDB locks and lock waits. Data source: L<"INNODB_BLOCKED_BLOCKER">.
+
+=item innodb_locks
+
+Displays InnoDB locks. Data source: L<"INNODB_LOCKS">.
+
+=item innodb_transactions
+
+Displays data about InnoDB's current transactions. Data source:
+L<"INNODB_TRANSACTIONS">.
+
+=item insert_buffers
+
+Displays data about InnoDB's insert buffer. Data source: L<"STATUS_VARIABLES">.
+
+=item io_threads
+
+Displays data about InnoDB's I/O threads. Data source: L<"IO_THREADS">.
+
+=item log_statistics
+
+Displays data about InnoDB's logging system. Data source: L<"STATUS_VARIABLES">.
+
+=item master_status
+
+Displays replication master status. Data source: L<"STATUS_VARIABLES">.
+
+=item open_tables
+
+Displays open tables. Data source: L<"OPEN_TABLES">.
+
+=item page_statistics
+
+Displays InnoDB page statistics. Data source: L<"STATUS_VARIABLES">.
+
+=item pending_io
+
+Displays InnoDB pending I/O operations. Data source: L<"STATUS_VARIABLES">.
+
+=item processlist
+
+Displays current MySQL processes (threads/connections). Data source:
+L<"PROCESSLIST">.
+
+=item q_header
+
+Displays various status values. Data source: L<"STATUS_VARIABLES">.
+
+=item row_operation_misc
+
+Displays data about InnoDB's row operations. Data source:
+L<"STATUS_VARIABLES">.
+
+=item row_operations
+
+Displays data about InnoDB's row operations. Data source:
+L<"STATUS_VARIABLES">.
+
+=item semaphores
+
+Displays data about InnoDB's semaphores and mutexes. Data source:
+L<"STATUS_VARIABLES">.
+
+=item slave_io_status
+
+Displays data about the slave I/O thread. Data source:
+L<"STATUS_VARIABLES">.
+
+=item slave_sql_status
+
+Displays data about the slave SQL thread. Data source: L<"STATUS_VARIABLES">.
+
+=item table_statistics
+
+Displays data from the TABLE_STATISTICS table in Percona-enhanced servers.
+
+=item t_header
+
+Displays various InnoDB status values. Data source: L<"STATUS_VARIABLES">.
+
+=item var_status
+
+Displays user-configurable data. Data source: L<"STATUS_VARIABLES">.
+
+=item wait_array
+
+Displays data about InnoDB's OS wait array. Data source: L<"OS_WAIT_ARRAY">.
+
+=back
+
+=head2 COLUMNS
+
+Columns belong to tables. You can choose a table's columns by pressing the '^'
+key, which starts the L<"TABLE EDITOR"> and lets you choose and edit columns.
+Pressing 'e' from within the table editor lets you edit the column's properties:
+
+=over
+
+=item *
+
+hdr: a column header. This appears in the first row of the table.
+
+=item *
+
+just: justification. '-' means left-justified and '' means right-justified,
+just as with printf formatting codes (not a coincidence).
+
+=item *
+
+dec: whether to further align the column on the decimal point.
+
+=item *
+
+num: whether the column is numeric. This affects how values are sorted
+(lexically or numerically).
+
+=item *
+
+label: a small note about the column, which appears in dialogs that help the
+user choose columns.
+
+=item *
+
+src: an expression that innotop uses to extract the column's data from its
+source (see L<"DATA SOURCES">). See L<"EXPRESSIONS"> for more on expressions.
+
+=item *
+
+minw: specifies a minimum display width. This helps stabilize the display,
+which makes it easier to read if the data is changing frequently.
+
+=item *
+
+maxw: similar to minw.
+
+=item *
+
+trans: a list of column transformations. See L<"TRANSFORMATIONS">.
+
+=item *
+
+agg: an aggregate function. See L<"GROUPING">. The default is L<"first">.
+
+=item *
+
+aggonly: controls whether the column only shows when grouping is enabled on the
+table (see L<"GROUPING">). By default, this is disabled. This means columns
+will always be shown by default, whether grouping is enabled or not. If a
+column's aggonly is set true, the column will appear when you toggle grouping on
+the table. Several columns are set this way, such as the count column on
+L<"processlist"> and L<"innodb_transactions">, so you don't see a count when the
+grouping isn't enabled, but you do when it is.
+
+=item *
+
+agghide: the reverse of aggonly. The column is hidden when grouping is enabled.
+
+=back
+
+=head2 FILTERS
+
+Filters remove rows from the display. They behave much like a WHERE clause in
+SQL. innotop has several built-in filters, which remove irrelevant information
+like inactive queries, but you can define your own as well. innotop also lets
+you create quick-filters, which do not get saved to the configuration file, and
+are just an easy way to quickly view only some rows.
+
+You can enable or disable a filter on any table. Press the '%' key (mnemonic: %
+looks kind of like a line being filtered between two circles) and choose which
+table you want to filter, if asked. You'll then see a list of possible filters
+and a list of filters currently enabled for that table. Type the names of
+filters you want to apply and press Enter.
+
+=head3 USER-DEFINED FILTERS
+
+If you type a name that doesn't exist, innotop will prompt you to create the
+filter. Filters are easy to create if you know Perl, and not hard if you don't.
+What you're doing is creating a subroutine that returns true if the row should
+be displayed. The row is a hash reference passed to your subroutine as $set.
+
+For example, imagine you want to filter the processlist table so you only see
+queries that have been running more than five minutes. Type a new name for your
+filter, and when prompted for the subroutine body, press TAB to initiate your
+terminal's auto-completion. You'll see the names of the columns in the
+L<"processlist"> table (innotop generally tries to help you with auto-completion
+lists). You want to filter on the 'time' column. Type the text "$set->{time} >
+300" to return true when the query is more than five minutes old. That's all
+you need to do.
+
+In other words, the code you're typing is surrounded by an implicit context,
+which looks like this:
+
+ sub filter {
+ my ( $set ) = @_;
+ # YOUR CODE HERE
+ }
+
+If your filter doesn't work, or if something else suddenly behaves differently,
+you might have made an error in your filter, and innotop is silently catching
+the error. Try enabling L<"debug"> to make innotop throw an error instead.
+
+=head3 QUICK-FILTERS
+
+innotop's quick-filters are a shortcut to create a temporary filter that doesn't
+persist when you restart innotop. To create a quick-filter, press the '/' key.
+innotop will prompt you for the column name and filter text. Again, you can use
+auto-completion on column names. The filter text can be just the text you want
+to "search for." For example, to filter the L<"processlist"> table on queries
+that refer to the products table, type '/' and then 'info product'. Internally,
+the filter is compiled into a subroutine like this:
+
+ sub filter {
+ my ( $set ) = @_;
+ $set->{info} =~ m/product/;
+ }
+
+The filter text can actually be any Perl regular expression, but of course a
+literal string like 'product' works fine as a regular expression.
+
+What if you want the filter to discard matching rows, rather than showing
+matching rows? If you're familiar with Perl regular expressions, you might
+guess how to do this. You have to use a zero-width negative lookahead
+assertion. If you don't know what that means, don't worry. Let's filter out
+all rows where the command is Gandalf. Type the following:
+
+ 1. /
+ 2. cmd ^(?!Gandalf)
+
+Behind the scenes innotop compiles the quick-filter into a specially tagged
+filter that is otherwise like any other filter. It just isn't saved to the
+configuration file.
+
+To clear quick-filters, press the '\' key and innotop will clear them all at
+once.
+
+=head2 SORTING
+
+innotop has sensible built-in defaults to sort the most important rows to the
+top of the table. Like anything else in innotop, you can customize how any
+table is sorted.
+
+To start the sort dialog, start the L<"TABLE EDITOR"> with the '^' key, choose a
+table if necessary, and press the 's' key. You'll see a list of columns you can
+use in the sort expression and the current sort expression, if any. Enter a
+list of columns by which you want to sort and press Enter. If you want to
+reverse sort, prefix the column name with a minus sign. For example, if you
+want to sort by column a ascending, then column b descending, type 'a -b'. You
+can also explicitly add a + in front of columns you want to sort ascending, but
+it's not required.
+
+Some modes have keys mapped to open this dialog directly, and to quickly reverse
+sort direction. Press '?' as usual to see which keys are mapped in any mode.
+
+=head2 GROUPING
+
+innotop can group, or aggregate, rows together (the terms are used
+interchangeably). This is quite similar to an SQL GROUP BY clause. You can
+specify to group on certain columns, or if you don't specify any, the entire set
+of rows is treated as one group. This is quite like SQL so far, but unlike SQL,
+you can also select un-grouped columns. innotop actually aggregates every
+column. If you don't explicitly specify a grouping function, the default is
+'first'. This is basically a convenience so you don't have to specify an
+aggregate function for every column you want in the result.
+
+You can quickly toggle grouping on a table with the '=' key, which toggles its
+aggregate property. This property doesn't persist to the config file.
+
+The columns by which the table is grouped are specified in its group_by
+property. When you turn grouping on, innotop places the group_by columns at the
+far left of the table, even if they're not supposed to be visible. The rest of
+the visible columns appear in order after them.
+
+Two tables have default group_by lists and a count column built in:
+L<"processlist"> and L<"innodb_transactions">. The grouping is by connection
+and status, so you can quickly see how many queries or transactions are in a
+given status on each server you're monitoring. The time columns are aggregated
+as a sum; other columns are left at the default 'first' aggregation.
+
+By default, the table shown in L<"S: Variables & Status"> mode also uses
+grouping so you can monitor variables and status across many servers. The
+default aggregation function in this mode is 'avg'.
+
+Valid grouping functions are defined in the %agg_funcs hash. They include
+
+=over
+
+=item first
+
+Returns the first element in the group.
+
+=item count
+
+Returns the number of elements in the group, including undefined elements, much
+like SQL's COUNT(*).
+
+=item avg
+
+Returns the average of defined elements in the group.
+
+=item sum
+
+Returns the sum of elements in the group.
+
+=back
+
+Here's an example of grouping at work. Suppose you have a very busy server with
+hundreds of open connections, and you want to see how many connections are in
+what status. Using the built-in grouping rules, you can press 'Q' to enter
+L<"Q: Query List"> mode. Press '=' to toggle grouping (if necessary, select the
+L<"processlist"> table when prompted).
+
+Your display might now look like the following:
+
+ Query List (? for help) localhost, 32:33, 0.11 QPS, 1 thd, 5.0.38-log
+
+ CXN Cmd Cnt ID User Host Time Query
+ localhost Query 49 12933 webusr localhost 19:38 SELECT * FROM
+ localhost Sending Da 23 2383 webusr localhost 12:43 SELECT col1,
+ localhost Sleep 120 140 webusr localhost 5:18:12
+ localhost Statistics 12 19213 webusr localhost 01:19 SELECT * FROM
+
+That's actually quite a worrisome picture. You've got a lot of idle connections
+(Sleep), and some connections executing queries (Query and Sending Data).
+That's okay, but you also have a lot in Statistics status, collectively spending
+over a minute. That means the query optimizer is having a really hard time
+generating execution plans for your statements. Something is wrong; it should
+normally take milliseconds to plan queries. You might not have seen this pattern if you
+didn't look at your connections in aggregate. (This is a made-up example, but
+it can happen in real life).
+
+=head2 PIVOTING
+
+innotop can pivot a table for more compact display, similar to a Pivot Table in
+a spreadsheet (also known as a crosstab). Pivoting a table makes columns into
+rows. Assume you start with this table:
+
+ foo bar
+ === ===
+ 1 3
+ 2 4
+
+After pivoting, the table will look like this:
+
+ name set0 set1
+ ==== ==== ====
+ foo 1 2
+ bar 3 4
+
+To get reasonable results, you might need to group as well as pivoting.
+innotop currently does this for L<"S: Variables & Status"> mode.
+
+=head2 COLORS
+
+By default, innotop highlights rows with color so you can see at a glance which
+rows are more important. You can customize the colorization rules and add your
+own to any table. Open the table editor with the '^' key, choose a table if
+needed, and press 'o' to open the color editor dialog.
+
+The color editor dialog displays the rules applied to the table, in the order
+they are evaluated. Each row is evaluated against each rule to see if the rule
+matches the row; if it does, the row gets the specified color, and no further
+rules are evaluated. The rules look like the following:
+
+ state eq Locked black on_red
+ cmd eq Sleep white
+ user eq system user white
+ cmd eq Connect white
+ cmd eq Binlog Dump white
+ time > 600 red
+ time > 120 yellow
+ time > 60 green
+ time > 30 cyan
+
+This is the default rule set for the L<"processlist"> table. In order of
+priority, these rules make locked queries black on a red background, "gray out"
+connections from replication and sleeping queries, and make queries turn from
+cyan to red as they run longer.
+
+(For some reason, the ANSI color code "white" is actually a light gray. Your
+terminal's display may vary; experiment to find colors you like).
+
+You can use keystrokes to move the rules up and down, which re-orders their
+priority. You can also delete rules and add new ones. If you add a new rule,
+innotop prompts you for the column, an operator for the comparison, a value
+against which to compare the column, and a color to assign if the rule matches.
+There is auto-completion and prompting at each step.
+
+The value in the third step needs to be correctly quoted. innotop does not try
+to quote the value because it doesn't know whether it should treat the value as
+a string or a number. If you want to compare the column against a string, as
+for example in the first rule above, you should enter 'Locked' surrounded by
+quotes. If you get an error message about a bareword, you probably should have
+quoted something.
+
+=head2 EXPRESSIONS
+
+Expressions are at the core of how innotop works, and are what enables you to
+extend innotop as you wish. Recall the table lifecycle explained in
+L<"TABLES">. Expressions are used in the earliest step, where it extracts
+values from a data source to form rows.
+
+It does this by calling a subroutine for each column, passing it the source data
+set, a set of current values, and a set of previous values. These are all
+needed so the subroutine can calculate things like the difference between this
+tick and the previous tick.
+
+The subroutines that extract the data from the set are compiled from
+expressions. This gives significantly more power than just naming the values to
+fill the columns, because it allows the column's value to be calculated from
+whatever data is necessary, but avoids the need to write complicated and lengthy
+Perl code.
+
+innotop begins with a string of text that can look as simple as a value's name
+or as complicated as a full-fledged Perl expression. It looks at each
+'bareword' token in the string and decides whether it's supposed to be a key
+into the $set hash. A bareword is an unquoted value that isn't already
+surrounded by code-ish things like dollar signs or curly brackets. If innotop
+decides that the bareword isn't a function or other valid Perl code, it converts
+it into a hash access. After the whole string is processed, innotop compiles a
+subroutine, like this:
+
+ sub compute_column_value {
+ my ( $set, $cur, $pre ) = @_;
+ my $val = # EXPANDED STRING GOES HERE
+ return $val;
+ }
+
+Here's a concrete example, taken from the header table L<"q_header"> in L<"Q:
+Query List"> mode. This expression calculates the qps, or Queries Per Second,
+column's values, from the values returned by SHOW STATUS:
+
+ Questions/Uptime_hires
+
+innotop decides both words are barewords, and transforms this expression into
+the following Perl code:
+
+ $set->{Questions}/$set->{Uptime_hires}
+
+When surrounded by the rest of the subroutine's code, this is executable Perl
+that calculates a high-resolution queries-per-second value.
+
+The arguments to the subroutine are named $set, $cur, and $pre. In most cases,
+$set and $cur will be the same values. However, if L<"status_inc"> is set, $cur
+will not be the same as $set, because $set will already contain values that are
+the incremental difference between $cur and $pre.
+
+Every column in innotop is computed by subroutines compiled in the same fashion.
+There is no difference between innotop's built-in columns and user-defined
+columns. This keeps things consistent and predictable.
+
+=head2 TRANSFORMATIONS
+
+Transformations change how a value is rendered. For example, they can take a
+number of seconds and display it in H:M:S format. The following transformations
+are defined:
+
+=over
+
+=item commify
+
+Adds commas to large numbers every three decimal places.
+
+=item distill
+
+Distills SQL into verb-noun-noun format for quick comprehension.
+
+=item dulint_to_int
+
+Accepts two unsigned integers and converts them into a single longlong. This is
+useful for certain operations with InnoDB, which uses two integers as
+transaction identifiers, for example.
+
+=item fuzzy_time
+
+Converts a number of seconds into a friendly, readable value like "1h35m".
+
+=item no_ctrl_char
+
+Removes quoted control characters from the value. This is affected by the
+L<"charset"> configuration variable.
+
+This transformation only operates within quoted strings, for example, values to
+a SET clause in an UPDATE statement. It will not alter the UPDATE statement,
+but will collapse the quoted string to [BINARY] or [TEXT], depending on the
+charset.
+
+=item percent
+
+Converts a number to a percentage by multiplying it by two, formatting it with
+L<"num_digits"> digits after the decimal point, and optionally adding a percent
+sign (see L<"show_percent">).
+
+=item secs_to_time
+
+Formats a number of seconds as time in days+hours:minutes:seconds format.
+
+=item set_precision
+
+Formats numbers with L<"num_digits"> number of digits after the decimal point.
+
+=item shorten
+
+Formats a number as a unit of 1024 (k/M/G/T) and with L<"num_digits"> number of
+digits after the decimal point.
+
+=back
+
+=head2 TABLE EDITOR
+
+The innotop table editor lets you customize tables with keystrokes. You start
+the table editor with the '^' key. If there's more than one table on the
+screen, it will prompt you to choose one of them. Once you do, innotop will
+show you something like this:
+
+ Editing table definition for Buffer Pool. Press ? for help, q to quit.
+
+ name hdr label src
+ cxn CXN Connection from which cxn
+ buf_pool_size Size Buffer pool size IB_bp_buf_poo
+ buf_free Free Bufs Buffers free in the b IB_bp_buf_fre
+ pages_total Pages Pages total IB_bp_pages_t
+ pages_modified Dirty Pages Pages modified (dirty IB_bp_pages_m
+ buf_pool_hit_rate Hit Rate Buffer pool hit rate IB_bp_buf_poo
+ total_mem_alloc Memory Total memory allocate IB_bp_total_m
+ add_pool_alloc Add'l Pool Additional pool alloca IB_bp_add_poo
+
+The first line shows which table you're editing, and reminds you again to press
+'?' for a list of key mappings. The rest is a tabular representation of the
+table's columns, because that's likely what you're trying to edit. However, you
+can edit more than just the table's columns; this screen can start the filter
+editor, color rule editor, and more.
+
+Each row in the display shows a single column in the table you're editing, along
+with a couple of its properties such as its header and source expression (see
+L<"EXPRESSIONS">).
+
+The key mappings are Vim-style, as in many other places. Pressing 'j' and 'k'
+moves the highlight up or down. You can then (d)elete or (e)dit the highlighted
+column. You can also (a)dd a column to the table. This actually just activates
+one of the columns already defined for the table; it prompts you to choose from
+among the columns available but not currently displayed. Finally, you can
+re-order the columns with the '+' and '-' keys.
+
+You can do more than just edit the columns with the table editor, you can also
+edit other properties, such as the table's sort expression and group-by
+expression. Press '?' to see the full list, of course.
+
+If you want to really customize and create your own column, as opposed to just
+activating a built-in one that's not currently displayed, press the (n)ew key,
+and innotop will prompt you for the information it needs:
+
+=over
+
+=item *
+
+The column name: this needs to be a word without any funny characters, e.g. just
+letters, numbers and underscores.
+
+=item *
+
+The column header: this is the label that appears at the top of the column, in
+the table header. This can have spaces and funny characters, but be careful not
+to make it too wide and waste space on-screen.
+
+=item *
+
+The column's data source: this is an expression that determines what data from
+the source (see L<"TABLES">) innotop will put into the column. This can just be
+the name of an item in the source, or it can be a more complex expression, as
+described in L<"EXPRESSIONS">.
+
+=back
+
+Once you've entered the required data, your table has a new column. There is no
+difference between this column and the built-in ones; it can have all the same
+properties and behaviors. innotop will write the column's definition to the
+configuration file, so it will persist across sessions.
+
+Here's an example: suppose you want to track how many times your slaves have
+retried transactions. According to the MySQL manual, the
+Slave_retried_transactions status variable gives you that data: "The total
+number of times since startup that the replication slave SQL thread has retried
+transactions. This variable was added in version 5.0.4." This is appropriate to
+add to the L<"slave_sql_status"> table.
+
+To add the column, switch to the replication-monitoring mode with the 'M' key,
+and press the '^' key to start the table editor. When prompted, choose
+slave_sql_status as the table, then press 'n' to create the column. Type
+'retries' as the column name, 'Retries' as the column header, and
+'Slave_retried_transactions' as the source. Now the column is created, and you
+see the table editor screen again. Press 'q' to exit the table editor, and
+you'll see your column at the end of the table.
+
+=head1 VARIABLE SETS
+
+Variable sets are used in L<"S: Variables & Status"> mode to define more easily
+what variables you want to monitor. Behind the scenes they are compiled to a
+list of expressions, and then into a column list so they can be treated just
+like columns in any other table, in terms of data extraction and
+transformations. However, you're protected from the tedious details by a syntax
+that ought to feel very natural to you: a SQL SELECT list.
+
+The data source for variable sets, and indeed the entire S mode, is the
+combination of SHOW STATUS, SHOW VARIABLES, and SHOW INNODB STATUS. Imagine
+that you had a huge table with one column per variable returned from those
+statements. That's the data source for variable sets. You can now query this
+data source just like you'd expect. For example:
+
+ Questions, Uptime, Questions/Uptime as QPS
+
+Behind the scenes innotop will split that variable set into three expressions,
+compile them and turn them into a table definition, then extract as usual. This
+becomes a "variable set," or a "list of variables you want to monitor."
+
+innotop lets you name and save your variable sets, and writes them to the
+configuration file. You can choose which variable set you want to see with the
+'c' key, or activate the next and previous sets with the '>' and '<' keys.
+There are many built-in variable sets as well, which should give you a good
+start for creating your own. Press 'e' to edit the current variable set, or
+just to see how it's defined. To create a new one, just press 'c' and type its
+name.
+
+You may want to use some of the functions listed in L<"TRANSFORMATIONS"> to help
+format the results. In particular, L<"set_precision"> is often useful to limit
+the number of digits you see. Extending the above example, here's how:
+
+ Questions, Uptime, set_precision(Questions/Uptime) as QPS
+
+Actually, this still needs a little more work. If your L<"interval"> is less
+than one second, you might be dividing by zero because Uptime is incremental in
+this mode by default. Instead, use Uptime_hires:
+
+ Questions, Uptime, set_precision(Questions/Uptime_hires) as QPS
+
+This example is simple, but it shows how easy it is to choose which variables
+you want to monitor.
+
+=head1 PLUGINS
+
+innotop has a simple but powerful plugin mechanism by which you can extend
+or modify its existing functionality, and add new functionality. innotop's
+plugin functionality is event-based: plugins register themselves to be called
+when events happen. They then have a chance to influence the event.
+
+An innotop plugin is a Perl module (.pm) file placed in innotop's L<"plugin_dir">
+directory. On UNIX systems, you can place a symbolic link to the module instead
+of putting the actual file there. innotop automatically discovers files named C<*.pm>. If
+there is a corresponding entry in the L<"plugins"> configuration file section,
+innotop loads and activates the plugin.
+
+The module must conform to innotop's plugin interface. Additionally, the source
+code of the module must be written in such a way that innotop can inspect the
+file and determine the package name and description.
+
+=head2 Package Source Convention
+
+innotop inspects the plugin module's source to determine the Perl package name.
+It looks for a line of the form "package Foo;" and if found, considers the
+plugin's package name to be Foo. Of course the package name can be a valid Perl
+package name such as Foo::Bar, with double colons (::) and so on.
+
+It also looks for a description in the source code, to make the plugin editor
+more human-friendly. The description is a comment line of the form "#
+description: Foo", where "Foo" is the text innotop will consider to be the
+plugin's description.
+
+=head2 Plugin Interface
+
+The innotop plugin interface is quite simple: innotop expects the plugin to be
+an object-oriented module it can call certain methods on. The methods are
+
+=over
+
+=item new(%variables)
+
+This is the plugin's constructor. It is passed a hash of innotop's variables,
+which it can manipulate (see L<"Plugin Variables">). It must return a reference
+to the newly created plugin object.
+
+At construction time, innotop has only loaded the general configuration and
+created the default built-in variables with their default contents (which is
+quite a lot). Therefore, the state of the program is exactly as in the innotop
+source code, plus the configuration variables from the L<"general"> section in
+the config file.
+
+If your plugin manipulates the variables, it is changing global data, which is
+shared by innotop and all plugins. Plugins are loaded in the order they're
+listed in the config file. Your plugin may load before or after another plugin,
+so there is a potential for conflict or interaction between plugins if they
+modify data other plugins use or modify.
+
+=item register_for_events()
+
+This method must return a list of events in which the plugin is interested, if
+any. See L<"Plugin Events"> for the defined events. If the plugin returns an
+event that's not defined, the event is ignored.
+
+=item event handlers
+
+The plugin must implement a method named the same as each event for which it has
+registered. In other words, if the plugin returns qw(foo bar) from
+register_for_events(), it must have foo() and bar() methods. These methods are
+callbacks for the events. See L<"Plugin Events"> for more details about each
+event.
+
+=back
+
+=head2 Plugin Variables
+
+The plugin's constructor is passed a hash of innotop's variables, which it can
+manipulate. It is probably a good idea if the plugin object saves a copy of it
+for later use. The variables are defined in the innotop variable
+%pluggable_vars, and are as follows:
+
+=over
+
+=item action_for
+
+A hashref of key mappings. These are innotop's global hot-keys.
+
+=item agg_funcs
+
+A hashref of functions that can be used for grouping. See L<"GROUPING">.
+
+=item config
+
+The global configuration hash.
+
+=item connections
+
+A hashref of connection specifications. These are just specifications of how to
+connect to a server.
+
+=item dbhs
+
+A hashref of innotop's database connections. These are actual DBI connection
+objects.
+
+=item filters
+
+A hashref of filters applied to table rows. See L<"FILTERS"> for more.
+
+=item modes
+
+A hashref of modes. See L<"MODES"> for more.
+
+=item server_groups
+
+A hashref of server groups. See L<"SERVER GROUPS">.
+
+=item tbl_meta
+
+A hashref of innotop's table meta-data, with one entry per table (see
+L<"TABLES"> for more information).
+
+=item trans_funcs
+
+A hashref of transformation functions. See L<"TRANSFORMATIONS">.
+
+=item var_sets
+
+A hashref of variable sets. See L<"VARIABLE SETS">.
+
+=back
+
+=head2 Plugin Events
+
+Each event is defined somewhere in the innotop source code. When innotop runs
+that code, it executes the callback function for each plugin that expressed its
+interest in the event. innotop passes some data for each event. The events are
+defined in the %event_listener_for variable, and are as follows:
+
+=over
+
+=item extract_values($set, $cur, $pre, $tbl)
+
+This event occurs inside the function that extracts values from a data source.
+The arguments are the set of values, the current values, the previous values,
+and the table name.
+
+=item set_to_tbl
+
+Events are defined at many places in this subroutine, which is responsible for
+turning an arrayref of hashrefs into an arrayref of lines that can be printed to
+the screen. The events all pass the same data: an arrayref of rows and the name
+of the table being created. The events are set_to_tbl_pre_filter,
+set_to_tbl_pre_sort,set_to_tbl_pre_group, set_to_tbl_pre_colorize,
+set_to_tbl_pre_transform, set_to_tbl_pre_pivot, set_to_tbl_pre_create,
+set_to_tbl_post_create.
+
+=item draw_screen($lines)
+
+This event occurs inside the subroutine that prints the lines to the screen.
+$lines is an arrayref of strings.
+
+=back
+
+=head2 Simple Plugin Example
+
+The easiest way to explain the plugin functionality is probably with a simple
+example. The following module adds a column to the beginning of every table and
+sets its value to 1. (If you copy and paste this example code, be sure to remove
+the first space from each line; lines such as '# description' must not start with
+whitespace).
+
+ use strict;
+ use warnings FATAL => 'all';
+
+ package Innotop::Plugin::Example;
+ # description: Adds an 'example' column to every table
+
+ sub new {
+ my ( $class, %vars ) = @_;
+ # Store reference to innotop's variables in $self
+ my $self = bless { %vars }, $class;
+
+ # Design the example column
+ my $col = {
+ hdr => 'Example',
+ just => '',
+ dec => 0,
+ num => 1,
+ label => 'Example',
+ src => 'example', # Get data from this column in the data source
+ tbl => '',
+ trans => [],
+ };
+
+ # Add the column to every table.
+ my $tbl_meta = $vars{tbl_meta};
+ foreach my $tbl ( values %$tbl_meta ) {
+ # Add the column to the list of defined columns
+ $tbl->{cols}->{example} = $col;
+ # Add the column to the list of visible columns
+ unshift @{$tbl->{visible}}, 'example';
+ }
+
+ # Be sure to return a reference to the object.
+ return $self;
+ }
+
+ # I'd like to be called when a data set is being rendered into a table, please.
+ sub register_for_events {
+ my ( $self ) = @_;
+ return qw(set_to_tbl_pre_filter);
+ }
+
+ # This method will be called when the event fires.
+ sub set_to_tbl_pre_filter {
+ my ( $self, $rows, $tbl ) = @_;
+ # Set the example column's data source to the value 1.
+ foreach my $row ( @$rows ) {
+ $row->{example} = 1;
+ }
+ }
+
+ 1;
+
+=head2 Plugin Editor
+
+The plugin editor lets you view the plugins innotop discovered and activate or
+deactivate them. Start the editor by pressing $ to start the configuration
+editor from any mode. Press the 'p' key to start the plugin editor. You'll see
+a list of plugins innotop discovered. You can use the 'j' and 'k' keys to move
+the highlight to the desired one, then press the * key to toggle it active or
+inactive. Exit the editor and restart innotop for the changes to take effect.
+
+=head1 SQL STATEMENTS
+
+innotop uses a limited set of SQL statements to retrieve data from MySQL for
+display. The statements are customized depending on the server version against
+which they are executed; for example, on MySQL 5 and newer, INNODB_STATUS
+executes "SHOW ENGINE INNODB STATUS", while on earlier versions it executes
+"SHOW INNODB STATUS". The statements are as follows:
+
+ Statement SQL executed
+ =================== ===============================
+ INDEX_STATISTICS SELECT * FROM INFORMATION_SCHEMA.INDEX_STATISTICS
+ INNODB_STATUS SHOW [ENGINE] INNODB STATUS
+ KILL_CONNECTION KILL
+ KILL_QUERY KILL QUERY
+ OPEN_TABLES SHOW OPEN TABLES
+ PROCESSLIST SHOW FULL PROCESSLIST
+ SHOW_MASTER_LOGS SHOW MASTER LOGS
+ SHOW_MASTER_STATUS SHOW MASTER STATUS
+ SHOW_SLAVE_STATUS SHOW SLAVE STATUS
+ SHOW_STATUS SHOW [GLOBAL] STATUS
+ SHOW_VARIABLES SHOW [GLOBAL] VARIABLES
+ TABLE_STATISTICS SELECT * FROM INFORMATION_SCHEMA.TABLE_STATISTICS
+
+=head1 DATA SOURCES
+
+Each time innotop extracts values to create a table (see L<"EXPRESSIONS"> and
+L<"TABLES">), it does so from a particular data source. Largely because of the
+complex data extracted from SHOW INNODB STATUS, this is slightly messy. SHOW
+INNODB STATUS contains a mixture of single values and repeated values that form
+nested data sets.
+
+Whenever innotop fetches data from MySQL, it adds two extra bits to each set:
+cxn and Uptime_hires. cxn is the name of the connection from which the data
+came. Uptime_hires is a high-resolution version of the server's Uptime status
+variable, which is important if your L<"interval"> setting is sub-second.
+
+Here are the kinds of data sources from which data is extracted:
+
+=over
+
+=item STATUS_VARIABLES
+
+This is the broadest category, into which the most kinds of data fall. It
+begins with the combination of SHOW STATUS and SHOW VARIABLES, but other sources
+may be included as needed, for example, SHOW MASTER STATUS and SHOW SLAVE
+STATUS, as well as many of the non-repeated values from SHOW INNODB STATUS.
+
+=item DEADLOCK_LOCKS
+
+This data is extracted from the transaction list in the LATEST DETECTED DEADLOCK
+section of SHOW INNODB STATUS. It is nested two levels deep: transactions, then
+locks.
+
+=item DEADLOCK_TRANSACTIONS
+
+This data is from the transaction list in the LATEST DETECTED DEADLOCK
+section of SHOW INNODB STATUS. It is nested one level deep.
+
+=item EXPLAIN
+
+This data is from the result set returned by EXPLAIN.
+
+=item INNODB_BLOCKED_BLOCKER
+
+This data is from the INFORMATION_SCHEMA tables related to InnoDB locks and
+the processlist.
+
+=item INNODB_TRANSACTIONS
+
+This data is from the TRANSACTIONS section of SHOW INNODB STATUS.
+
+=item IO_THREADS
+
+This data is from the list of threads in the FILE I/O section of SHOW INNODB
+STATUS.
+
+=item INNODB_LOCKS
+
+This data is from the TRANSACTIONS section of SHOW INNODB STATUS and is nested
+two levels deep.
+
+=item MASTER_SLAVE
+
+This data is from the combination of SHOW MASTER STATUS and SHOW SLAVE STATUS.
+
+=item OPEN_TABLES
+
+This data is from SHOW OPEN TABLES.
+
+=item PROCESSLIST
+
+This data is from SHOW FULL PROCESSLIST.
+
+=item PROCESSLIST_STATS
+
+This data is from SHOW FULL PROCESSLIST and computes stats such as the maximum time
+a user query has been running, and how many user queries are running. A "user
+query" excludes replication threads.
+
+=item OS_WAIT_ARRAY
+
+This data is from the SEMAPHORES section of SHOW INNODB STATUS and is nested one
+level deep. It comes from the lines that look like this:
+
+ --Thread 1568861104 has waited at btr0cur.c line 424 ....
+
+=back
+
+=head1 MYSQL PRIVILEGES
+
+=over
+
+=item *
+
+You must connect to MySQL as a user who has the SUPER privilege for many of the
+functions.
+
+=item *
+
+If you don't have the SUPER privilege, you can still run some functions, but you
+won't necessarily see all the same data.
+
+=item *
+
+You need the PROCESS privilege to see the list of currently running queries in Q
+mode.
+
+=item *
+
+You need special privileges to start and stop slave servers.
+
+=item *
+
+You need appropriate privileges to create and drop the deadlock tables if needed
+(see L<"SERVER CONNECTIONS">).
+
+=back
+
+=head1 SYSTEM REQUIREMENTS
+
+You need Perl to run innotop, of course. You also need a few Perl modules: DBI,
+DBD::MariaDB, Term::ReadKey, and Time::HiRes. These should be included with most
+Perl distributions, but in case they are not, I recommend using versions
+distributed with your operating system or Perl distribution, not from CPAN.
+Term::ReadKey in particular has been known to cause problems if installed from
+CPAN.
+
+If you have Term::ANSIColor, innotop will use it to format headers more readably
+and compactly. (Under Microsoft Windows, you also need Win32::Console::ANSI for
+terminal formatting codes to be honored). If you install Term::ReadLine,
+preferably Term::ReadLine::Gnu, you'll get nice auto-completion support.
+
+I run innotop on Gentoo GNU/Linux, Debian and Ubuntu, and I've had feedback from
+people successfully running it on Red Hat, CentOS, Solaris, and Mac OSX. I
+don't see any reason why it won't work on other UNIX-ish operating systems, but
+I don't know for sure. It also runs on Windows under ActivePerl without
+problem.
+
+innotop has been used on MySQL versions 3.23.58, 4.0.27, 4.1.0, 4.1.22, 5.0.26,
+5.1.15, and 5.2.3. If it doesn't run correctly for you, that is a bug that
+should be reported.
+
+=head1 FILES
+
+$HOMEDIR/.innotop and/or /etc/innotop are used to store
+configuration information. Files include the configuration file innotop.conf,
+the core_dump file which contains verbose error messages if L<"debug"> is
+enabled, and the plugins/ subdirectory.
+
+=head1 GLOSSARY OF TERMS
+
+=over
+
+=item tick
+
+A tick is a refresh event, when innotop re-fetches data from connections and
+displays it.
+
+=back
+
+=head1 ACKNOWLEDGEMENTS
+
+The following people and organizations are acknowledged for various reasons.
+Hopefully no one has been forgotten.
+
+Aaron Racine,
+Allen K. Smith,
+Aurimas Mikalauskas,
+Bartosz Fenski,
+Brian Miezejewski,
+Christian Hammers,
+Cyril Scetbon,
+Dane Miller,
+David Multer,
+Dr. Frank Ullrich,
+Giuseppe Maxia,
+Google.com Site Reliability Engineers,
+Google Code,
+Jan Pieter Kunst,
+Jari Aalto,
+Jay Pipes,
+Jeremy Zawodny,
+Johan Idren,
+Kristian Kohntopp,
+Lenz Grimmer,
+Maciej Dobrzanski,
+Michiel Betel,
+MySQL AB,
+Paul McCullagh,
+Sebastien Estienne,
+Sourceforge.net,
+Steven Kreuzer,
+The Gentoo MySQL Team,
+Trevor Price,
+Yaar Schnitman,
+and probably more people that have not been included.
+
+(If your name has been misspelled, it's probably out of fear of putting
+international characters into this documentation; earlier versions of Perl might
+not be able to compile it then).
+
+=head1 COPYRIGHT, LICENSE AND WARRANTY
+
+This program is copyright (c) 2006 Baron Schwartz.
+Feedback and improvements are welcome.
+
+THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
++MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation, version 2; OR the Perl Artistic License. On UNIX and similar
+systems, you can issue `man perlgpl' or `man perlartistic' to read these
+licenses.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc., 51 Franklin
+Street, Fifth Floor, Boston, MA 02110-1335 USA.
+
+Execute innotop and press '!' to see this information at any time.
+
+=head1 AUTHOR
+
+Originally written by Baron Schwartz; currently maintained by Aaron Racine.
+
+=head1 BUGS
+
+You can report bugs, ask for improvements, and get other help and support at
+L<https://github.com/innotop/innotop>. There are mailing lists, a source code
+browser, a bug tracker, etc. Please use these instead of contacting the
+maintainer or author directly, as it makes our job easier and benefits others if the
+discussions are permanent and public. Of course, if you need to contact us in
+private, please do.
+
+=cut
--- /dev/null
- so much code devoted to parsing this messy, unparseable output that innotop is
+.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28)
+.\"
+.\" Standard preamble:
+.\" ========================================================================
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Vb \" Begin verbatim text
+.ft CW
+.nf
+.ne \\$1
+..
+.de Ve \" End verbatim text
+.ft R
+.fi
+..
+.\" Set up some character translations and predefined strings. \*(-- will
+.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
+.\" double quote, and \*(R" will give a right double quote. \*(C+ will
+.\" give a nicer C++. Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
+.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
+.ie n \{\
+. ds -- \(*W-
+. ds PI pi
+. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
+. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
+. ds L" ""
+. ds R" ""
+. ds C` ""
+. ds C' ""
+'br\}
+.el\{\
+. ds -- \|\(em\|
+. ds PI \(*p
+. ds L" ``
+. ds R" ''
+. ds C`
+. ds C'
+'br\}
+.\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el .ds Aq '
+.\"
+.\" If the F register is turned on, we'll generate index entries on stderr for
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
+.\" entries marked with X<> in POD. Of course, you'll have to process the
+.\" output yourself in some meaningful fashion.
+.\"
+.\" Avoid warning from groff about undefined register 'F'.
+.de IX
+..
+.nr rF 0
+.if \n(.g .if rF .nr rF 1
+.if (\n(rF:(\n(.g==0)) \{
+. if \nF \{
+. de IX
+. tm Index:\\$1\t\\n%\t"\\$2"
+..
+. if !\nF==2 \{
+. nr % 0
+. nr F 2
+. \}
+. \}
+.\}
+.rr rF
+.\"
+.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
+.\" Fear. Run. Save yourself. No user-serviceable parts.
+. \" fudge factors for nroff and troff
+.if n \{\
+. ds #H 0
+. ds #V .8m
+. ds #F .3m
+. ds #[ \f1
+. ds #] \fP
+.\}
+.if t \{\
+. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
+. ds #V .6m
+. ds #F 0
+. ds #[ \&
+. ds #] \&
+.\}
+. \" simple accents for nroff and troff
+.if n \{\
+. ds ' \&
+. ds ` \&
+. ds ^ \&
+. ds , \&
+. ds ~ ~
+. ds /
+.\}
+.if t \{\
+. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
+. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
+. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
+. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
+. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
+. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
+.\}
+. \" troff and (daisy-wheel) nroff accents
+.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
+.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
+.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
+.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
+.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
+.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
+.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
+.ds ae a\h'-(\w'a'u*4/10)'e
+.ds Ae A\h'-(\w'A'u*4/10)'E
+. \" corrections for vroff
+.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
+.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
+. \" for low resolution devices (crt and lpr)
+.if \n(.H>23 .if \n(.V>19 \
+\{\
+. ds : e
+. ds 8 ss
+. ds o a
+. ds d- d\h'-1'\(ga
+. ds D- D\h'-1'\(hy
+. ds th \o'bp'
+. ds Th \o'LP'
+. ds ae ae
+. ds Ae AE
+.\}
+.rm #[ #] #H #V #F C
+.\" ========================================================================
+.\"
+.IX Title "INNOTOP 1"
+.TH INNOTOP 1 "2017-01-23" "perl v5.20.2" "User Contributed Perl Documentation"
+.\" For nroff, turn off justification. Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
+.SH "NAME"
+innotop \- MySQL and InnoDB transaction/status monitor.
+.SH "SYNOPSIS"
+.IX Header "SYNOPSIS"
+To monitor servers normally:
+.PP
+.Vb 1
+\& innotop
+.Ve
+.PP
+To monitor InnoDB status information from a file:
+.PP
+.Vb 1
+\& innotop /var/log/mysql/mysqld.err
+.Ve
+.PP
+To run innotop non-interactively in a pipe-and-filter configuration:
+.PP
+.Vb 1
+\& innotop \-\-count 5 \-d 1 \-n
+.Ve
+.PP
+To monitor a database on another system using a particular username and password:
+.PP
+.Vb 1
+\& innotop \-u <username> \-p <password> \-h <hostname>
+.Ve
+.SH "DESCRIPTION"
+.IX Header "DESCRIPTION"
+innotop monitors MySQL servers. Each of its modes shows you a different aspect
+of what's happening in the server. For example, there's a mode for monitoring
+replication, one for queries, and one for transactions. innotop refreshes its
+data periodically, so you see an updating view.
+.PP
+innotop has lots of features for power users, but you can start and run it with
+virtually no configuration. If you're just getting started, see
+\&\*(L"QUICK-START\*(R". Press '?' at any time while running innotop for
+context-sensitive help.
+.SH "QUICK-START"
+.IX Header "QUICK-START"
+To start innotop, open a terminal or command prompt. If you have installed
+innotop on your system, you should be able to just type \*(L"innotop\*(R" and press
+Enter; otherwise, you will need to change to innotop's directory and type \*(L"perl
+innotop\*(R".
+.PP
+With no options specified, innotop will attempt to connect to a MySQL server on
+localhost using mariadb_read_default_group=client for other connection
+parameters. If you need to specify a different username and password, use the
+\&\-u and \-p options, respectively. To monitor a MySQL database on another
+host, use the \-h option.
+.PP
+After you've connected, innotop should show you something like the following:
+.PP
+.Vb 1
+\& [RO] Query List (? for help) localhost, 01:11:19, 449.44 QPS, 14/7/163 con/run
+\&
+\& CXN When Load QPS Slow QCacheHit KCacheHit BpsIn BpsOut
+\& localhost Total 0.00 1.07k 697 0.00% 98.17% 476.83k 242.83k
+\&
+\& CXN Cmd ID User Host DB Time Query
+\& localhost Query 766446598 test 10.0.0.1 foo 00:02 INSERT INTO table (
+.Ve
+.PP
+(This sample is truncated at the right so it will fit on a terminal when running
+\&'man innotop')
+.PP
+If your server is busy, you'll see more output. Notice the first line on the
+screen, which tells you that readonly is set to true ([\s-1RO\s0]), what mode you're
+in and what server you're connected to. You can change to other modes with
+keystrokes; press 'T' to switch to a list of InnoDB transactions, for example.
+.PP
+Press the '?' key to see what keys are active in the current mode. You can
+press any of these keys and innotop will either take the requested action or
+prompt you for more input. If your system has Term::ReadLine support, you can
+use \s-1TAB\s0 and other keys to auto-complete and edit input.
+.PP
+To quit innotop, press the 'q' key.
+.SH "OPTIONS"
+.IX Header "OPTIONS"
+innotop is mostly configured via its configuration file, but some of the
+configuration options can come from the command line. You can also specify a
+file to monitor for InnoDB status output; see \*(L"\s-1MONITORING A FILE\*(R"\s0 for more
+details.
+.PP
+You can negate some options by prefixing the option name with \-\-no. For
+example, \-\-noinc (or \-\-no\-inc) negates \*(L"\-\-inc\*(R".
+.IP "\-\-color" 4
+.IX Item "--color"
+Enable or disable terminal coloring. Corresponds to the \*(L"color\*(R" config file
+setting.
+.IP "\-\-config" 4
+.IX Item "--config"
+Specifies a configuration file to read. This option is non-sticky, that is to
+say it does not persist to the configuration file itself.
+.IP "\-\-count" 4
+.IX Item "--count"
+Refresh only the specified number of times (ticks) before exiting. Each refresh
+is a pause for \*(L"interval\*(R" seconds, followed by requesting data from MySQL
+connections and printing it to the terminal.
+.IP "\-\-delay" 4
+.IX Item "--delay"
+Specifies the amount of time to pause between ticks (refreshes). Corresponds to
+the configuration option \*(L"interval\*(R".
+.IP "\-\-help" 4
+.IX Item "--help"
+Print a summary of command-line usage and exit.
+.IP "\-\-host" 4
+.IX Item "--host"
+Host to connect to.
+.IP "\-\-inc" 4
+.IX Item "--inc"
+Specifies whether innotop should display absolute numbers or relative numbers
+(offsets from their previous values). Corresponds to the configuration option
+\&\*(L"status_inc\*(R".
+.IP "\-\-mode" 4
+.IX Item "--mode"
+Specifies the mode in which innotop should start. Corresponds to the
+configuration option \*(L"mode\*(R".
+.IP "\-\-nonint" 4
+.IX Item "--nonint"
+Enable non-interactive operation. See \*(L"NON-INTERACTIVE \s-1OPERATION\*(R"\s0 for more.
+.IP "\-\-password" 4
+.IX Item "--password"
+Password to use for connection.
+.IP "\-\-port" 4
+.IX Item "--port"
+Port to use for connection.
+.IP "\-\-skipcentral" 4
+.IX Item "--skipcentral"
+Don't read the central configuration file.
+.IP "\-\-timestamp" 4
+.IX Item "--timestamp"
+In \-n mode, write a timestamp either before every screenful of output, or if
+the option is given twice, at the start of every line. The format is controlled
+by the timeformat config variable.
+.IP "\-\-user" 4
+.IX Item "--user"
+User to use for connection.
+.IP "\-\-version" 4
+.IX Item "--version"
+Output version information and exit.
+.IP "\-\-write" 4
+.IX Item "--write"
+Sets the configuration option \*(L"readonly\*(R" to 0, making innotop write the
+running configuration to ~/.innotop/innotop.conf on exit, if no configuration
+file was loaded at start-up.
+.SH "HOTKEYS"
+.IX Header "HOTKEYS"
+innotop is interactive, and you control it with key-presses.
+.IP "\(bu" 4
+Uppercase keys switch between modes.
+.IP "\(bu" 4
+Lowercase keys initiate some action within the current mode.
+.IP "\(bu" 4
+Other keys do something special like change configuration or show the
+innotop license.
+.PP
+Press '?' at any time to see the currently active keys and what they do.
+.SH "MODES"
+.IX Header "MODES"
+Each of innotop's modes retrieves and displays a particular type of data from
+the servers you're monitoring. You switch between modes with uppercase keys.
+The following is a brief description of each mode, in alphabetical order. To
+switch to the mode, press the key listed in front of its heading in the
+following list:
+.IP "A: Health Dashboard" 4
+.IX Item "A: Health Dashboard"
+This mode displays a single table with one row per monitored server. The
+columns show essential overview information about the server's health, and
+coloration rules show whether replication is running or if there are any very
+long-running queries or excessive replication delay.
+.IP "B: InnoDB Buffers" 4
+.IX Item "B: InnoDB Buffers"
+This mode displays information about the InnoDB buffer pool, page statistics,
+insert buffer, and adaptive hash index. The data comes from \s-1SHOW INNODB STATUS.\s0
+.Sp
+This mode contains the \*(L"buffer_pool\*(R", \*(L"page_statistics\*(R",
+\&\*(L"insert_buffers\*(R", and \*(L"adaptive_hash_index\*(R" tables by default.
+.IP "C: Command Summary" 4
+.IX Item "C: Command Summary"
+This mode is similar to mytop's Command Summary mode. It shows the
+\&\*(L"cmd_summary\*(R" table, which looks something like the following:
+.Sp
+.Vb 8
+\& Command Summary (? for help) localhost, 25+07:16:43, 2.45 QPS, 3 thd, 5.0.40
+\& _\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_ Command Summary _\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_
+\& Name Value Pct Last Incr Pct
+\& Select_scan 3244858 69.89% 2 100.00%
+\& Select_range 1354177 29.17% 0 0.00%
+\& Select_full_join 39479 0.85% 0 0.00%
+\& Select_full_range_join 4097 0.09% 0 0.00%
+\& Select_range_check 0 0.00% 0 0.00%
+.Ve
+.Sp
+The command summary table is built by extracting variables from
+\&\*(L"\s-1STATUS_VARIABLES\*(R"\s0. The variables must be numeric and must match the prefix
+given by the \*(L"cmd_filter\*(R" configuration variable. The variables are then
+sorted by value descending and compared to the last variable, as shown above.
+The percentage columns are percentage of the total of all variables in the
+table, so you can see the relative weight of the variables.
+.Sp
+The example shows what you see if the prefix is \*(L"Select_\*(R". The default
+prefix is \*(L"Com_\*(R". You can choose a prefix with the 's' key.
+.Sp
+It's rather like running \s-1SHOW VARIABLES LIKE \s0\*(L"prefix%\*(R" with memory and
+nice formatting.
+.Sp
+Values are aggregated across all servers. The Pct columns are not correctly
+aggregated across multiple servers. This is a known limitation of the grouping
+algorithm that may be fixed in the future.
+.IP "D: InnoDB Deadlocks" 4
+.IX Item "D: InnoDB Deadlocks"
+This mode shows the transactions involved in the last InnoDB deadlock. A second
+table shows the locks each transaction held and waited for. A deadlock is
+caused by a cycle in the waits-for graph, so there should be two locks held and
+one waited for unless the deadlock information is truncated.
+.Sp
+InnoDB puts deadlock information before some other information in the \s-1SHOW
+INNODB STATUS\s0 output. If there are a lot of locks, the deadlock information can
+grow very large, and there is a limit on the size of the \s-1SHOW INNODB
+STATUS\s0 output. A large deadlock can fill the entire output, or even be
+truncated, and prevent you from seeing other information at all. If you are
+running innotop in another mode, for example T mode, and suddenly you don't see
+anything, you might want to check and see if a deadlock has wiped out the data
+you need.
+.Sp
+If it has, you can create a small deadlock to replace the large one. Use the
+\&'w' key to 'wipe' the large deadlock with a small one. This will not work
+unless you have defined a deadlock table for the connection (see \*(L"\s-1SERVER
+CONNECTIONS\*(R"\s0).
+.Sp
+You can also configure innotop to automatically detect when a large deadlock
+needs to be replaced with a small one (see \*(L"auto_wipe_dl\*(R").
+.Sp
+This mode displays the \*(L"deadlock_transactions\*(R" and \*(L"deadlock_locks\*(R" tables
+by default.
+.IP "F: InnoDB Foreign Key Errors" 4
+.IX Item "F: InnoDB Foreign Key Errors"
+This mode shows the last InnoDB foreign key error information, such as the
+table where it happened, when and who and what query caused it, and so on.
+.Sp
+InnoDB has a huge variety of foreign key error messages, and many of them are
+just hard to parse. innotop doesn't always do the best job here, but there's
- MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.\s0
++so much code devoted to parsing this messy, unparsable output that innotop is
+likely never to be perfect in this regard. If innotop doesn't show you what
+you need to see, just look at the status text directly.
+.Sp
+This mode displays the \*(L"fk_error\*(R" table by default.
+.IP "I: InnoDB I/O Info" 4
+.IX Item "I: InnoDB I/O Info"
+This mode shows InnoDB's I/O statistics, including the I/O threads, pending I/O,
+file I/O miscellaneous, and log statistics. It displays the \*(L"io_threads\*(R",
+\&\*(L"pending_io\*(R", \*(L"file_io_misc\*(R", and \*(L"log_statistics\*(R" tables by default.
+.IP "K: InnoDB Lock Waits" 4
+.IX Item "K: InnoDB Lock Waits"
+This mode shows information from InnoDB plugin's transaction and locking tables.
+You can use it to find when a transaction is waiting for another, and kill the
+blocking transaction. It displays the "innodb_blocked_blocker" table.
+.IP "L: Locks" 4
+.IX Item "L: Locks"
+This mode shows information about current locks. At the moment only InnoDB
+locks are supported, and by default you'll only see locks for which transactions
+are waiting. This information comes from the \s-1TRANSACTIONS\s0 section of the InnoDB
+status text. If you have a very busy server, you may have frequent lock waits;
+it helps to be able to see which tables and indexes are the \*(L"hot spot\*(R" for
+locks. If your server is running pretty well, this mode should show nothing.
+.Sp
+You can configure MySQL and innotop to monitor not only locks for which a
+transaction is waiting, but those currently held, too. You can do this with the
+InnoDB Lock Monitor (<http://dev.mysql.com/doc/en/innodb\-monitor.html>). It's
+not documented in the MySQL manual, but creating the lock monitor with the
+following statement also affects the output of \s-1SHOW INNODB STATUS,\s0 which innotop
+uses:
+.Sp
+.Vb 1
+\& CREATE TABLE innodb_lock_monitor(a int) ENGINE=INNODB;
+.Ve
+.Sp
+This causes InnoDB to print its output to the MySQL file every 16 seconds or so,
+as stated in the manual, but it also makes the normal \s-1SHOW INNODB STATUS\s0 output
+include lock information, which innotop can parse and display (that's the
+undocumented feature).
+.Sp
+This means you can do what may have seemed impossible: to a limited extent
+(InnoDB truncates some information in the output), you can see which transaction
+holds the locks something else is waiting for. You can also enable and disable
+the InnoDB Lock Monitor with the key mappings in this mode.
+.Sp
+This mode displays the \*(L"innodb_locks\*(R" table by default. Here's a sample of
+the screen when one connection is waiting for locks another connection holds:
+.Sp
+.Vb 7
+\& _\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_ InnoDB Locks _\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_\|_
+\& CXN ID Type Waiting Wait Active Mode DB Table Index
+\& localhost 12 RECORD 1 00:10 00:10 X test t1 PRIMARY
+\& localhost 12 TABLE 0 00:10 00:10 IX test t1
+\& localhost 12 RECORD 1 00:10 00:10 X test t1 PRIMARY
+\& localhost 11 TABLE 0 00:00 00:25 IX test t1
+\& localhost 11 RECORD 0 00:00 00:25 X test t1 PRIMARY
+.Ve
+.Sp
+You can see the first connection, \s-1ID 12,\s0 is waiting for a lock on the \s-1PRIMARY\s0
+key on test.t1, and has been waiting for 10 seconds. The second connection
+isn't waiting, because the Waiting column is 0, but it holds locks on the same
+index. That tells you connection 11 is blocking connection 12.
+.IP "M: Master/Slave Replication Status" 4
+.IX Item "M: Master/Slave Replication Status"
+This mode shows the output of \s-1SHOW SLAVE STATUS\s0 and \s-1SHOW MASTER STATUS\s0 in three
+tables. The first two divide the slave's status into \s-1SQL\s0 and I/O thread status,
+and the last shows master status. Filters are applied to eliminate non-slave
+servers from the slave tables, and non-master servers from the master table.
+.Sp
+This mode displays the \*(L"slave_sql_status\*(R", \*(L"slave_io_status\*(R", and
+\&\*(L"master_status\*(R" tables by default.
+.IP "O: Open Tables" 4
+.IX Item "O: Open Tables"
+This section comes from MySQL's \s-1SHOW OPEN TABLES\s0 command. By default it is
+filtered to show tables which are in use by one or more queries, so you can
+get a quick look at which tables are 'hot'. You can use this to guess which
+tables might be locked implicitly.
+.Sp
+This mode displays the \*(L"open_tables\*(R" mode by default.
+.IP "U: User Statistics" 4
+.IX Item "U: User Statistics"
+This mode displays data that's available in Percona's enhanced version of MySQL
+(also known as Percona Server with XtraDB). Specifically, it makes it easy to
+enable and disable the so-called \*(L"user statistics.\*(R" This feature gathers stats
+on clients, threads, users, tables, and indexes and makes them available as
+\&\s-1INFORMATION_SCHEMA\s0 tables. These are invaluable for understanding what your
+server is doing. They are also available in MariaDB.
+.Sp
+The statistics supported so far are only from the \s-1TABLE_STATISTICS\s0 and
+\&\s-1INDEX_STATISTICS\s0 tables added by Percona. There are three views: one of table stats,
+one of index stats (which can be aggregated with the = key), and one of both.
+.Sp
+The server doesn't gather these stats by default. You have to set the variable
+userstat_running to turn it on. You can do this easily with innotop from U mode,
+with the 's' key.
+.IP "Q: Query List" 4
+.IX Item "Q: Query List"
+This mode displays the output from \s-1SHOW FULL PROCESSLIST,\s0 much like \fBmytop\fR's
+query list mode. This mode does \fBnot\fR show InnoDB-related information. This
+is probably one of the most useful modes for general usage.
+.Sp
+There is an informative header that shows general status information about
+your server. You can toggle it on and off with the 'h' key. By default,
+innotop hides inactive processes and its own process. You can toggle these on
+and off with the 'i' and 'a' keys.
+.Sp
+You can \s-1EXPLAIN\s0 a query from this mode with the 'e' key. This displays the
+query's full text, the results of \s-1EXPLAIN,\s0 and in newer MySQL versions, even
+the optimized query resulting from \s-1EXPLAIN EXTENDED. \s0 innotop also tries to
+rewrite certain queries to make them EXPLAIN-able. For example, \s-1INSERT/SELECT\s0
+statements are rewritable.
+.Sp
+This mode displays the \*(L"q_header\*(R" and \*(L"processlist\*(R" tables by default.
+.IP "R: InnoDB Row Operations and Semaphores" 4
+.IX Item "R: InnoDB Row Operations and Semaphores"
+This mode shows InnoDB row operations, row operation miscellaneous, semaphores,
+and information from the wait array. It displays the \*(L"row_operations\*(R",
+\&\*(L"row_operation_misc\*(R", \*(L"semaphores\*(R", and \*(L"wait_array\*(R" tables by default.
+.IP "S: Variables & Status" 4
+.IX Item "S: Variables & Status"
+This mode calculates statistics, such as queries per second, and prints them out
+in several different styles. You can show absolute values, or incremental values
+between ticks.
+.Sp
+You can switch between the views by pressing a key. The 's' key prints a
+single line each time the screen updates, in the style of \fBvmstat\fR. The 'g'
+key changes the view to a graph of the same numbers, sort of like \fBtload\fR.
+The 'v' key changes the view to a pivoted table of variable names on the left,
+with successive updates scrolling across the screen from left to right. You can
+choose how many updates to put on the screen with the \*(L"num_status_sets\*(R"
+configuration variable.
+.Sp
+Headers may be abbreviated to fit on the screen in interactive operation. You
+choose which variables to display with the 'c' key, which selects from
+predefined sets, or lets you create your own sets. You can edit the current set
+with the 'e' key.
+.Sp
+This mode doesn't really display any tables like other modes. Instead, it uses
+a table definition to extract and format the data, but it then transforms the
+result in special ways before outputting it. It uses the \*(L"var_status\*(R" table
+definition for this.
+.IP "T: InnoDB Transactions" 4
+.IX Item "T: InnoDB Transactions"
+This mode shows transactions from the InnoDB monitor's output, in \fBtop\fR\-like
+format. This mode is the reason I wrote innotop.
+.Sp
+You can kill queries or processes with the 'k' and 'x' keys, and \s-1EXPLAIN\s0 a query
+with the 'e' or 'f' keys. InnoDB doesn't print the full query in transactions,
+so explaining may not work right if the query is truncated.
+.Sp
+The informational header can be toggled on and off with the 'h' key. By
+default, innotop hides inactive transactions and its own transaction. You can
+toggle this on and off with the 'i' and 'a' keys.
+.Sp
+This mode displays the \*(L"t_header\*(R" and \*(L"innodb_transactions\*(R" tables by
+default.
+.SH "INNOTOP STATUS"
+.IX Header "INNOTOP STATUS"
+The first line innotop displays is a \*(L"status bar\*(R" of sorts. What it contains
+depends on the mode you're in, and what servers you're monitoring. The first
+few words are always [\s-1RO\s0] (if readonly is set to 1), the innotop mode, such as
+\&\*(L"InnoDB Txns\*(R" for T mode, followed by a reminder to press '?' for help at any
+time.
+.SS "\s-1ONE SERVER\s0"
+.IX Subsection "ONE SERVER"
+The simplest case is when you're monitoring a single server. In this case, the
+name of the connection is next on the status line. This is the name you gave
+when you created the connection \*(-- most likely the MySQL server's hostname.
+This is followed by the server's uptime.
+.PP
+If you're in an InnoDB mode, such as T or B, the next word is \*(L"InnoDB\*(R" followed
+by some information about the \s-1SHOW INNODB STATUS\s0 output used to render the
+screen. The first word is the number of seconds since the last \s-1SHOW INNODB
+STATUS,\s0 which InnoDB uses to calculate some per-second statistics. The next is
+a smiley face indicating whether the InnoDB output is truncated. If the smiley
+face is a :\-), all is well; there is no truncation. A :^| means the transaction
+list is so long, InnoDB has only printed out some of the transactions. Finally,
+a frown :\-( means the output is incomplete, which is probably due to a deadlock
+printing too much lock information (see \*(L"D: InnoDB Deadlocks\*(R").
+.PP
+The next two words indicate the server's queries per second (\s-1QPS\s0) and how many
+threads (connections) exist. Finally, the server's version number is the last
+thing on the line.
+.SS "\s-1MULTIPLE SERVERS\s0"
+.IX Subsection "MULTIPLE SERVERS"
+If you are monitoring multiple servers (see \*(L"\s-1SERVER CONNECTIONS\*(R"\s0), the status
+line does not show any details about individual servers. Instead, it shows the
+names of the connections that are active. Again, these are connection names you
+specified, which are likely to be the server's hostname. A connection that has
+an error is prefixed with an exclamation point.
+.PP
+If you are monitoring a group of servers (see \*(L"\s-1SERVER GROUPS\*(R"\s0), the status
+line shows the name of the group. If any connection in the group has an
+error, the group's name is followed by the fraction of the connections that
+don't have errors.
+.PP
+See \*(L"\s-1ERROR HANDLING\*(R"\s0 for more details about innotop's error handling.
+.SS "\s-1MONITORING A FILE\s0"
+.IX Subsection "MONITORING A FILE"
+If you give a filename on the command line, innotop will not connect to \s-1ANY\s0
+servers at all. It will watch the specified file for InnoDB status output and
+use that as its data source. It will always show a single connection called
+\&'file'. And since it can't connect to a server, it can't determine how long the
+server it's monitoring has been up; so it calculates the server's uptime as time
+since innotop started running.
+.SH "SERVER ADMINISTRATION"
+.IX Header "SERVER ADMINISTRATION"
+While innotop is primarily a monitor that lets you watch and analyze your
+servers, it can also send commands to servers. The most frequently useful
+commands are killing queries and stopping or starting slaves.
+.PP
+You can kill a connection, or in newer versions of MySQL kill a query but not a
+connection, from \*(L"Q: Query List\*(R" and \*(L"T: InnoDB Transactions\*(R" modes.
+Press 'k' to issue a \s-1KILL\s0 command, or 'x' to issue a \s-1KILL QUERY\s0 command.
+innotop will prompt you for the server and/or connection \s-1ID\s0 to kill (innotop
+does not prompt you if there is only one possible choice for any input).
+innotop pre-selects the longest-running query, or the oldest connection.
+Confirm the command with 'y'.
+.PP
+In \*(L"Slave Replication Status\*(R"\*(L" in \*(R"M: Master mode, you can start and stop slaves
+with the 'a' and 'o' keys, respectively. You can send these commands to many
+slaves at once. innotop fills in a default command of \s-1START SLAVE\s0 or \s-1STOP SLAVE\s0
+for you, but you can actually edit the command and send anything you wish, such
+as \s-1SET GLOBAL\s0 SQL_SLAVE_SKIP_COUNTER=1 to make the slave skip one binlog event
+when it starts.
+.PP
+You can also ask innotop to calculate the earliest binlog in use by any slave
+and issue a \s-1PURGE MASTER LOGS\s0 on the master. Use the 'b' key for this. innotop
+will prompt you for a master to run the command on, then prompt you for the
+connection names of that master's slaves (there is no way for innotop to
+determine this reliably itself). innotop will find the minimum binlog in use by
+these slave connections and suggest it as the argument to \s-1PURGE MASTER LOGS.\s0
+.PP
+in \*(L"U: User Statistics\*(R" mode, you can use the 's' key to start and stop
+the collection of the statistics data for \s-1TABLE_STATISTICS\s0 and similar.
+.SH "SERVER CONNECTIONS"
+.IX Header "SERVER CONNECTIONS"
+When you create a server connection using '@', innotop asks you for a series of
+inputs, as follows:
+.IP "\s-1DSN\s0" 4
+.IX Item "DSN"
+A \s-1DSN\s0 is a Data Source Name, which is the initial argument passed to the \s-1DBI\s0
+module for connecting to a server. It is usually of the form
+.Sp
+.Vb 1
+\& DBI:MariaDB:;mariadb_read_default_group=mysql;host=HOSTNAME
+.Ve
+.Sp
+Since this \s-1DSN\s0 is passed to the DBD::MariaDB driver, you should read the driver's
+documentation at <https://metacpan.org/pod/DBD::MariaDB> for
+the exact details on all the options you can pass the driver in the \s-1DSN. \s0 You
+can read more about \s-1DBI\s0 at <http://dbi.perl.org/docs/>, and especially at
+<http://search.cpan.org/~timb/DBI/DBI.pm>.
+.Sp
+The mariadb_read_default_group=mysql option lets the \s-1DBD\s0 driver read your MySQL
+options files, such as ~/.my.cnf on UNIX-ish systems. You can use this to avoid
+specifying a username or password for the connection.
+.IP "InnoDB Deadlock Table" 4
+.IX Item "InnoDB Deadlock Table"
+This optional item tells innotop a table name it can use to deliberately create
+a small deadlock (see \*(L"D: InnoDB Deadlocks\*(R"). If you specify this option,
+you just need to be sure the table doesn't exist, and that innotop can create
+and drop the table with the InnoDB storage engine. You can safely omit or just
+accept the default if you don't intend to use this.
+.IP "Username" 4
+.IX Item "Username"
+innotop will ask you if you want to specify a username. If you say 'y', it will
+then prompt you for a user name. If you have a MySQL option file that specifies
+your username, you don't have to specify a username.
+.Sp
+The username defaults to your login name on the system you're running innotop on.
+.IP "Password" 4
+.IX Item "Password"
+innotop will ask you if you want to specify a password. Like the username, the
+password is optional, but there's an additional prompt that asks if you want to
+save the password in the innotop configuration file. If you don't save it in
+the configuration file, innotop will prompt you for a password each time it
+starts. Passwords in the innotop configuration file are saved in plain text,
+not encrypted in any way.
+.PP
+Once you finish answering these questions, you should be connected to a server.
+But innotop isn't limited to monitoring a single server; you can define many
+server connections and switch between them by pressing the '@' key. See
+\&\*(L"\s-1SWITCHING BETWEEN CONNECTIONS\*(R"\s0.
+.SH "SERVER GROUPS"
+.IX Header "SERVER GROUPS"
+If you have multiple MySQL instances, you can put them into named groups, such
+as 'all', 'masters', and 'slaves', which innotop can monitor all together.
+.PP
+You can choose which group to monitor with the '#' key, and you can press the
+\&\s-1TAB\s0 key to switch to the next group. If you're not currently monitoring a
+group, pressing \s-1TAB\s0 selects the first group.
+.PP
+To create a group, press the '#' key and type the name of your new group, then
+type the names of the connections you want the group to contain.
+.SH "SWITCHING BETWEEN CONNECTIONS"
+.IX Header "SWITCHING BETWEEN CONNECTIONS"
+innotop lets you quickly switch which servers you're monitoring. The most basic
+way is by pressing the '@' key and typing the name(s) of the connection(s) you
+want to use. This setting is per-mode, so you can monitor different connections
+in each mode, and innotop remembers which connections you choose.
+.PP
+You can quickly switch to the 'next' connection in alphabetical order with the
+\&'n' key. If you're monitoring a server group (see \*(L"\s-1SERVER GROUPS\*(R"\s0) this will
+switch to the first connection.
+.PP
+You can also type many connection names, and innotop will fetch and display data
+from them all. Just separate the connection names with spaces, for example
+\&\*(L"server1 server2.\*(R" Again, if you type the name of a connection that doesn't
+exist, innotop will prompt you for connection information and create the
+connection.
+.PP
+Another way to monitor multiple connections at once is with server groups. You
+can use the \s-1TAB\s0 key to switch to the 'next' group in alphabetical order, or if
+you're not monitoring any groups, \s-1TAB\s0 will switch to the first group.
+.PP
+innotop does not fetch data in parallel from connections, so if you are
+monitoring a large group or many connections, you may notice increased delay
+between ticks.
+.PP
+When you monitor more than one connection, innotop's status bar changes. See
+\&\*(L"\s-1INNOTOP STATUS\*(R"\s0.
+.SH "ERROR HANDLING"
+.IX Header "ERROR HANDLING"
+Error handling is not that important when monitoring a single connection, but is
+crucial when you have many active connections. A crashed server or lost
+connection should not crash innotop. As a result, innotop will continue to run
+even when there is an error; it just won't display any information from the
+connection that had an error. Because of this, innotop's behavior might confuse
+you. It's a feature, not a bug!
+.PP
+innotop does not continue to query connections that have errors, because they
+may slow innotop and make it hard to use, especially if the error is a problem
+connecting and causes a long time-out. Instead, innotop retries the connection
+occasionally to see if the error still exists. If so, it will wait until some
+point in the future. The wait time increases in ticks as the Fibonacci series,
+so it tries less frequently as time passes.
+.PP
+Since errors might only happen in certain modes because of the \s-1SQL\s0 commands
+issued in those modes, innotop keeps track of which mode caused the error. If
+you switch to a different mode, innotop will retry the connection instead of
+waiting.
+.PP
+By default innotop will display the problem in red text at the bottom of the
+first table on the screen. You can disable this behavior with the
+\&\*(L"show_cxn_errors_in_tbl\*(R" configuration option, which is enabled by default.
+If the \*(L"debug\*(R" option is enabled, innotop will display the error at the
+bottom of every table, not just the first. And if \*(L"show_cxn_errors\*(R" is
+enabled, innotop will print the error text to \s-1STDOUT\s0 as well. Error messages
+might only display in the mode that caused the error, depending on the mode and
+whether innotop is avoiding querying that connection.
+.SH "NON-INTERACTIVE OPERATION"
+.IX Header "NON-INTERACTIVE OPERATION"
+You can run innotop in non-interactive mode, in which case it is entirely
+controlled from the configuration file and command-line options. To start
+innotop in non-interactive mode, give the L\*(L"<\-\-nonint\*(R"> command-line option.
+This changes innotop's behavior in the following ways:
+.IP "\(bu" 4
+Certain Perl modules are not loaded. Term::Readline is not loaded, since
+innotop doesn't prompt interactively. Term::ANSIColor and Win32::Console::ANSI
+modules are not loaded. Term::ReadKey is still used, since innotop may have to
+prompt for connection passwords when starting up.
+.IP "\(bu" 4
+innotop does not clear the screen after each tick.
+.IP "\(bu" 4
+innotop does not persist any changes to the configuration file.
+.IP "\(bu" 4
+If \*(L"\-\-count\*(R" is given and innotop is in incremental mode (see \*(L"status_inc\*(R"
+and \*(L"\-\-inc\*(R"), innotop actually refreshes one more time than specified so it
+can print incremental statistics. This suppresses output during the first
+tick, so innotop may appear to hang.
+.IP "\(bu" 4
+innotop only displays the first table in each mode. This is so the output can
+be easily processed with other command-line utilities such as awk and sed. To
+change which tables display in each mode, see \*(L"\s-1TABLES\*(R"\s0. Since \*(L"Q: Query
+List\*(R" mode is so important, innotop automatically disables the \*(L"q_header\*(R"
+table. This ensures you'll see the \*(L"processlist\*(R" table, even if you have
+innotop configured to show the q_header table during interactive operation.
+Similarly, in \*(L"T: InnoDB Transactions\*(R" mode, the \*(L"t_header\*(R" table is
+suppressed so you see only the \*(L"innodb_transactions\*(R" table.
+.IP "\(bu" 4
+All output is tab-separated instead of being column-aligned with whitespace, and
+innotop prints the full contents of each table instead of only printing one
+screenful at a time.
+.IP "\(bu" 4
+innotop only prints column headers once instead of every tick (see
+\&\*(L"hide_hdr\*(R"). innotop does not print table captions (see
+\&\*(L"display_table_captions\*(R"). innotop ensures there are no empty lines in the
+output.
+.IP "\(bu" 4
+innotop does not honor the \*(L"shorten\*(R" transformation, which normally shortens
+some numbers to human-readable formats.
+.IP "\(bu" 4
+innotop does not print a status line (see \*(L"\s-1INNOTOP STATUS\*(R"\s0).
+.SH "CONFIGURING"
+.IX Header "CONFIGURING"
+Nearly everything about innotop is configurable. Most things are possible to
+change with built-in commands, but you can also edit the configuration file.
+.PP
+While running innotop, press the '$' key to bring up the configuration editing
+dialog. Press another key to select the type of data you want to edit:
+.IP "S: Statement Sleep Times" 4
+.IX Item "S: Statement Sleep Times"
+Edits \s-1SQL\s0 statement sleep delays, which make innotop pause for the specified
+amount of time after executing a statement. See \*(L"\s-1SQL STATEMENTS\*(R"\s0 for a
+definition of each statement and what it does. By default innotop does not
+delay after any statements.
+.Sp
+This feature is included so you can customize the side-effects caused by
+monitoring your server. You may not see any effects, but some innotop users
+have noticed that certain MySQL versions under very high load with InnoDB
+enabled take longer than usual to execute \s-1SHOW GLOBAL STATUS. \s0 If innotop calls
+\&\s-1SHOW FULL PROCESSLIST\s0 immediately afterward, the processlist contains more
+queries than the machine actually averages at any given moment. Configuring
+innotop to pause briefly after calling \s-1SHOW GLOBAL STATUS\s0 alleviates this
+effect.
+.Sp
+Sleep times are stored in the \*(L"stmt_sleep_times\*(R" section of the configuration
+file. Fractional-second sleeps are supported, subject to your hardware's
+limitations.
+.IP "c: Edit Columns" 4
+.IX Item "c: Edit Columns"
+Starts the table editor on one of the displayed tables. See \*(L"\s-1TABLE EDITOR\*(R"\s0.
+An alternative way to start the table editor without entering the configuration
+dialog is with the '^' key.
+.IP "g: General Configuration" 4
+.IX Item "g: General Configuration"
+Starts the configuration editor to edit global and mode-specific configuration
+variables (see \*(L"\s-1MODES\*(R"\s0). innotop prompts you to choose a variable from among
+the global and mode-specific ones depending on the current mode.
+.IP "k: Row-Coloring Rules" 4
+.IX Item "k: Row-Coloring Rules"
+Starts the row-coloring rules editor on one of the displayed table(s). See
+\&\*(L"\s-1COLORS\*(R"\s0 for details.
+.IP "p: Manage Plugins" 4
+.IX Item "p: Manage Plugins"
+Starts the plugin configuration editor. See \*(L"\s-1PLUGINS\*(R"\s0 for details.
+.IP "s: Server Groups" 4
+.IX Item "s: Server Groups"
+Lets you create and edit server groups. See \*(L"\s-1SERVER GROUPS\*(R"\s0.
+.IP "t: Choose Displayed Tables" 4
+.IX Item "t: Choose Displayed Tables"
+Lets you choose which tables to display in this mode. See \*(L"\s-1MODES\*(R"\s0 and
+\&\*(L"\s-1TABLES\*(R"\s0.
+.SH "CONFIGURATION FILE"
+.IX Header "CONFIGURATION FILE"
+innotop's default configuration file locations are \f(CW$HOME\fR/.innotop and
+/etc/innotop/innotop.conf, and they are looked for in that order. If the first
+configuration file exists, the second will not be processed. Those can be
+overridden with the \*(L"\-\-config\*(R" command-line option. You can edit it by hand
+safely, however innotop reads the configuration file when it starts, and, if
+readonly is set to 0, writes it out again when it exits. Thus, if readonly is
+set to 0, any changes you make by hand while innotop is running will be lost.
+.PP
+innotop doesn't store its entire configuration in the configuration file. It
+has a huge set of default configuration values that it holds only in memory,
+and the configuration file only overrides these defaults. When you customize a
+default setting, innotop notices, and then stores the customizations into the
+file. This keeps the file size down, makes it easier to edit, and makes
+upgrades easier.
+.PP
+A configuration file is read-only be default. You can override that with
+\&\*(L"\-\-write\*(R". See \*(L"readonly\*(R".
+.PP
+The configuration file is arranged into sections like an \s-1INI\s0 file. Each
+section begins with [section\-name] and ends with [/section\-name]. Each
+section's entries have a different syntax depending on the data they need to
+store. You can put comments in the file; any line that begins with a #
+character is a comment. innotop will not read the comments, so it won't write
+them back out to the file when it exits. Comments in read-only configuration
+files are still useful, though.
+.PP
+The first line in the file is innotop's version number. This lets innotop
+notice when the file format is not backwards-compatible, and upgrade smoothly
+without destroying your customized configuration.
+.PP
+The following list describes each section of the configuration file and the data
+it contains:
+.IP "general" 4
+.IX Item "general"
+The 'general' section contains global configuration variables and variables that
+may be mode-specific, but don't belong in any other section. The syntax is a
+simple key=value list. innotop writes a comment above each value to help you
+edit the file by hand.
+.RS 4
+.IP "S_func" 4
+.IX Item "S_func"
+Controls S mode presentation (see \*(L"S: Variables & Status\*(R"). If g, values are
+graphed; if s, values are like vmstat; if p, values are in a pivoted table.
+.IP "S_set" 4
+.IX Item "S_set"
+Specifies which set of variables to display in \*(L"S: Variables & Status\*(R" mode.
+See \*(L"\s-1VARIABLE SETS\*(R"\s0.
+.IP "auto_wipe_dl" 4
+.IX Item "auto_wipe_dl"
+Instructs innotop to automatically wipe large deadlocks when it notices them.
+When this happens you may notice a slight delay. At the next tick, you will
+usually see the information that was being truncated by the large deadlock.
+.IP "charset" 4
+.IX Item "charset"
+Specifies what kind of characters to allow through the \*(L"no_ctrl_char\*(R"
+transformation. This keeps non-printable characters from confusing a
+terminal when you monitor queries that contain binary data, such as images.
+.Sp
+The default is 'ascii', which considers anything outside normal \s-1ASCII\s0 to be a
+control character. The other allowable values are 'unicode' and 'none'. 'none'
+considers every character a control character, which can be useful for
+collapsing \s-1ALL\s0 text fields in queries.
+.IP "cmd_filter" 4
+.IX Item "cmd_filter"
+This is the prefix that filters variables in \*(L"C: Command Summary\*(R" mode.
+.IP "color" 4
+.IX Item "color"
+Whether terminal coloring is permitted.
+.IP "cxn_timeout" 4
+.IX Item "cxn_timeout"
+On MySQL versions 4.0.3 and newer, this variable is used to set the connection's
+timeout, so MySQL doesn't close the connection if it is not used for a while.
+This might happen because a connection isn't monitored in a particular mode, for
+example.
+.IP "debug" 4
+.IX Item "debug"
+This option enables more verbose errors and makes innotop more strict in some
+places. It can help in debugging filters and other user-defined code. It also
+makes innotop write a lot of information to \*(L"debugfile\*(R" when there is a
+crash.
+.IP "debugfile" 4
+.IX Item "debugfile"
+A file to which innotop will write information when there is a crash. See
+\&\*(L"\s-1FILES\*(R"\s0.
+.IP "display_table_captions" 4
+.IX Item "display_table_captions"
+innotop displays a table caption above most tables. This variable suppresses or
+shows captions on all tables globally. Some tables are configured with the
+hide_caption property, which overrides this.
+.IP "global" 4
+.IX Item "global"
+Whether to show \s-1GLOBAL\s0 variables and status. innotop only tries to do this on
+servers which support the \s-1GLOBAL\s0 option to \s-1SHOW VARIABLES\s0 and \s-1SHOW STATUS. \s0 In
+some MySQL versions, you need certain privileges to do this; if you don't have
+them, innotop will not be able to fetch any variable and status data. This
+configuration variable lets you run innotop and fetch what data you can even
+without the elevated privileges.
+.Sp
+I can no longer find or reproduce the situation where \s-1GLOBAL\s0 wasn't allowed, but
+I know there was one.
+.IP "graph_char" 4
+.IX Item "graph_char"
+Defines the character to use when drawing graphs in \*(L"S: Variables & Status\*(R"
+mode.
+.IP "header_highlight" 4
+.IX Item "header_highlight"
+Defines how to highlight column headers. This only works if Term::ANSIColor is
+available. Valid values are 'bold' and 'underline'.
+.IP "hide_hdr" 4
+.IX Item "hide_hdr"
+Hides column headers globally.
+.IP "interval" 4
+.IX Item "interval"
+The interval at which innotop will refresh its data (ticks). The interval is
+implemented as a sleep time between ticks, so the true interval will vary
+depending on how long it takes innotop to fetch and render data.
+.Sp
+This variable accepts fractions of a second.
+.IP "mode" 4
+.IX Item "mode"
+The mode in which innotop should start. Allowable arguments are the same as the
+key presses that select a mode interactively. See \*(L"\s-1MODES\*(R"\s0.
+.IP "num_digits" 4
+.IX Item "num_digits"
+How many digits to show in fractional numbers and percents. This variable's
+range is between 0 and 9 and can be set directly from \*(L"S: Variables & Status\*(R"
+mode with the '+' and '\-' keys. It is used in the \*(L"set_precision\*(R",
+\&\*(L"shorten\*(R", and \*(L"percent\*(R" transformations.
+.IP "num_status_sets" 4
+.IX Item "num_status_sets"
+Controls how many sets of status variables to display in pivoted \*(L"S: Variables
+& Status\*(R" mode. It also controls the number of old sets of variables innotop
+keeps in its memory, so the larger this variable is, the more memory innotop
+uses.
+.IP "plugin_dir" 4
+.IX Item "plugin_dir"
+Specifies where plugins can be found. By default, innotop stores plugins in the
+\&'plugins' subdirectory of your innotop configuration directory.
+.IP "readonly" 4
+.IX Item "readonly"
+Whether the configuration file is readonly. This cannot be set interactively.
+.IP "show_cxn_errors" 4
+.IX Item "show_cxn_errors"
+Makes innotop print connection errors to \s-1STDOUT. \s0 See \*(L"\s-1ERROR HANDLING\*(R"\s0.
+.IP "show_cxn_errors_in_tbl" 4
+.IX Item "show_cxn_errors_in_tbl"
+Makes innotop display connection errors as rows in the first table on screen.
+See \*(L"\s-1ERROR HANDLING\*(R"\s0.
+.IP "show_percent" 4
+.IX Item "show_percent"
+Adds a '%' character after the value returned by the \*(L"percent\*(R"
+transformation.
+.IP "show_statusbar" 4
+.IX Item "show_statusbar"
+Controls whether to show the status bar in the display. See \*(L"\s-1INNOTOP
+STATUS\*(R"\s0.
+.IP "skip_innodb" 4
+.IX Item "skip_innodb"
+Disables fetching \s-1SHOW INNODB STATUS,\s0 in case your server(s) do not have InnoDB
+enabled and you don't want innotop to try to fetch it. This can also be useful
+when you don't have the \s-1SUPER\s0 privilege, required to run \s-1SHOW INNODB STATUS.\s0
+.IP "spark" 4
+.IX Item "spark"
+Specifies how wide a spark chart is. There are two \s-1ASCII\s0 spark charts in A
+mode, showing \s-1QPS\s0 and User_threads_running.
+.IP "status_inc" 4
+.IX Item "status_inc"
+Whether to show absolute or incremental values for status variables.
+Incremental values are calculated as an offset from the last value innotop saw
+for that variable. This is a global setting, but will probably become
+mode-specific at some point. Right now it is honored a bit inconsistently; some
+modes don't pay attention to it.
+.IP "timeformat" 4
+.IX Item "timeformat"
+The C\-style \fIstrftime()\fR\-compatible format for the timestamp line to be printed
+in \-n mode when \-t is set.
+.RE
+.RS 4
+.RE
+.IP "plugins" 4
+.IX Item "plugins"
+This section holds a list of package names of active plugins. If the plugin
+exists, innotop will activate it. See \*(L"\s-1PLUGINS\*(R"\s0 for more information.
+.IP "filters" 4
+.IX Item "filters"
+This section holds user-defined filters (see \*(L"\s-1FILTERS\*(R"\s0). Each line is in the
+format filter_name=text='filter text' tbls='table list'.
+.Sp
+The filter text is the text of the subroutine's code. The table list is a list
+of tables to which the filter can apply. By default, user-defined filters apply
+to the table for which they were created, but you can manually override that by
+editing the definition in the configuration file.
+.IP "active_filters" 4
+.IX Item "active_filters"
+This section stores which filters are active on each table. Each line is in the
+format table_name=filter_list.
+.IP "tbl_meta" 4
+.IX Item "tbl_meta"
+This section stores user-defined or user-customized columns (see \*(L"\s-1COLUMNS\*(R"\s0).
+Each line is in the format col_name=properties, where the properties are a
+name=quoted\-value list.
+.IP "connections" 4
+.IX Item "connections"
+This section holds the server connections you have defined. Each line is in
+the format name=properties, where the properties are a name=value list. The
+properties are self-explanatory, and the only one that is treated specially is
+\&'pass' which is only present if 'savepass' is set. This section of the
+configuration file will be skipped if any \s-1DSN,\s0 username, or password
+command-line options are used. See \*(L"\s-1SERVER CONNECTIONS\*(R"\s0.
+.IP "active_connections" 4
+.IX Item "active_connections"
+This section holds a list of which connections are active in each mode. Each
+line is in the format mode_name=connection_list.
+.IP "server_groups" 4
+.IX Item "server_groups"
+This section holds server groups. Each line is in the format
+name=connection_list. See \*(L"\s-1SERVER GROUPS\*(R"\s0.
+.IP "active_server_groups" 4
+.IX Item "active_server_groups"
+This section holds a list of which server group is active in each mode. Each
+line is in the format mode_name=server_group.
+.IP "max_values_seen" 4
+.IX Item "max_values_seen"
+This section holds the maximum values seen for variables. This is used to scale
+the graphs in \*(L"S: Variables & Status\*(R" mode. Each line is in the format
+name=value.
+.IP "active_columns" 4
+.IX Item "active_columns"
+This section holds table column lists. Each line is in the format
+tbl_name=column_list. See \*(L"\s-1COLUMNS\*(R"\s0.
+.IP "sort_cols" 4
+.IX Item "sort_cols"
+This section holds the sort definition. Each line is in the format
+tbl_name=column_list. If a column is prefixed with '\-', that column sorts
+descending. See \*(L"\s-1SORTING\*(R"\s0.
+.IP "visible_tables" 4
+.IX Item "visible_tables"
+This section defines which tables are visible in each mode. Each line is in the
+format mode_name=table_list. See \*(L"\s-1TABLES\*(R"\s0.
+.IP "varsets" 4
+.IX Item "varsets"
+This section defines variable sets for use in \*(L"S: Status & Variables\*(R" mode.
+Each line is in the format name=variable_list. See \*(L"\s-1VARIABLE SETS\*(R"\s0.
+.IP "colors" 4
+.IX Item "colors"
+This section defines colorization rules. Each line is in the format
+tbl_name=property_list. See \*(L"\s-1COLORS\*(R"\s0.
+.IP "stmt_sleep_times" 4
+.IX Item "stmt_sleep_times"
+This section contains statement sleep times. Each line is in the format
+statement_name=sleep_time. See \*(L"S: Statement Sleep Times\*(R".
+.IP "group_by" 4
+.IX Item "group_by"
+This section contains column lists for table group_by expressions. Each line is
+in the format tbl_name=column_list. See \*(L"\s-1GROUPING\*(R"\s0.
+.SH "CUSTOMIZING"
+.IX Header "CUSTOMIZING"
+You can customize innotop a great deal. For example, you can:
+.IP "\(bu" 4
+Choose which tables to display, and in what order.
+.IP "\(bu" 4
+Choose which columns are in those tables, and create new columns.
+.IP "\(bu" 4
+Filter which rows display with built-in filters, user-defined filters, and
+quick-filters.
+.IP "\(bu" 4
+Sort the rows to put important data first or group together related rows.
+.IP "\(bu" 4
+Highlight rows with color.
+.IP "\(bu" 4
+Customize the alignment, width, and formatting of columns, and apply
+transformations to columns to extract parts of their values or format the values
+as you wish (for example, shortening large numbers to familiar units).
+.IP "\(bu" 4
+Design your own expressions to extract and combine data as you need. This gives
+you unlimited flexibility.
+.PP
+All these and more are explained in the following sections.
+.SS "\s-1TABLES\s0"
+.IX Subsection "TABLES"
+A table is what you'd expect: a collection of columns. It also has some other
+properties, such as a caption. Filters, sorting rules, and colorization rules
+belong to tables and are covered in later sections.
+.PP
+Internally, table meta-data is defined in a data structure called \f(CW%tbl_meta\fR.
+This hash holds all built-in table definitions, which contain a lot of default
+instructions to innotop. The meta-data includes the caption, a list of columns
+the user has customized, a list of columns, a list of visible columns, a list of
+filters, color rules, a sort-column list, sort direction, and some information
+about the table's data sources. Most of this is customizable via the table
+editor (see \*(L"\s-1TABLE EDITOR\*(R"\s0).
+.PP
+You can choose which tables to show by pressing the '$' key. See \*(L"\s-1MODES\*(R"\s0 and
+\&\*(L"\s-1TABLES\*(R"\s0.
+.PP
+The table life-cycle is as follows:
+.IP "\(bu" 4
+Each table begins with a data source, which is an array of hashes. See below
+for details on data sources.
+.IP "\(bu" 4
+Each element of the data source becomes a row in the final table.
+.IP "\(bu" 4
+For each element in the data source, innotop extracts values from the source and
+creates a row. This row is another hash, which later steps will refer to as
+\&\f(CW$set\fR. The values innotop extracts are determined by the table's columns. Each
+column has an extraction subroutine, compiled from an expression (see
+\&\*(L"\s-1EXPRESSIONS\*(R"\s0). The resulting row is a hash whose keys are named the same as
+the column name.
+.IP "\(bu" 4
+innotop filters the rows, removing those that don't need to be displayed. See
+\&\*(L"\s-1FILTERS\*(R"\s0.
+.IP "\(bu" 4
+innotop sorts the rows. See \*(L"\s-1SORTING\*(R"\s0.
+.IP "\(bu" 4
+innotop groups the rows together, if specified. See \*(L"\s-1GROUPING\*(R"\s0.
+.IP "\(bu" 4
+innotop colorizes the rows. See \*(L"\s-1COLORS\*(R"\s0.
+.IP "\(bu" 4
+innotop transforms the column values in each row. See \*(L"\s-1TRANSFORMATIONS\*(R"\s0.
+.IP "\(bu" 4
+innotop optionally pivots the rows (see \*(L"\s-1PIVOTING\*(R"\s0), then filters and sorts
+them.
+.IP "\(bu" 4
+innotop formats and justifies the rows as a table. During this step, innotop
+applies further formatting to the column values, including alignment, maximum
+and minimum widths. innotop also does final error checking to ensure there are
+no crashes due to undefined values. innotop then adds a caption if specified,
+and the table is ready to print.
+.PP
+The lifecycle is slightly different if the table is pivoted, as noted above. To
+clarify, if the table is pivoted, the process is extract, group, transform,
+pivot, filter, sort, create. If it's not pivoted, the process is extract,
+filter, sort, group, color, transform, create. This slightly convoluted process
+doesn't map all that well to \s-1SQL,\s0 but pivoting complicates things pretty
+thoroughly. Roughly speaking, filtering and sorting happen as late as needed to
+effect the final result as you might expect, but as early as possible for
+efficiency.
+.PP
+Each built-in table is described below:
+.IP "adaptive_hash_index" 4
+.IX Item "adaptive_hash_index"
+Displays data about InnoDB's adaptive hash index. Data source:
+\&\*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "buffer_pool" 4
+.IX Item "buffer_pool"
+Displays data about InnoDB's buffer pool. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "cmd_summary" 4
+.IX Item "cmd_summary"
+Displays weighted status variables. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "deadlock_locks" 4
+.IX Item "deadlock_locks"
+Shows which locks were held and waited for by the last detected deadlock. Data
+source: \*(L"\s-1DEADLOCK_LOCKS\*(R"\s0.
+.IP "deadlock_transactions" 4
+.IX Item "deadlock_transactions"
+Shows transactions involved in the last detected deadlock. Data source:
+\&\*(L"\s-1DEADLOCK_TRANSACTIONS\*(R"\s0.
+.IP "explain" 4
+.IX Item "explain"
+Shows the output of \s-1EXPLAIN. \s0 Data source: \*(L"\s-1EXPLAIN\*(R"\s0.
+.IP "file_io_misc" 4
+.IX Item "file_io_misc"
+Displays data about InnoDB's file and I/O operations. Data source:
+\&\*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "fk_error" 4
+.IX Item "fk_error"
+Displays various data about InnoDB's last foreign key error. Data source:
+\&\*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "health_dashboard" 4
+.IX Item "health_dashboard"
+Displays an overall summary of servers, one server per line, for monitoring.
+Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0, \*(L"\s-1MASTER_SLAVE\*(R"\s0, \*(L"\s-1PROCESSLIST_STATS\*(R"\s0.
+.IP "index_statistics" 4
+.IX Item "index_statistics"
+Displays data from the \s-1INDEX_STATISTICS\s0 table in Percona-enhanced servers.
+.IP "index_table_statistics" 4
+.IX Item "index_table_statistics"
+Displays data from the \s-1INDEX_STATISTICS\s0 and \s-1TABLE_STATISTICS\s0 tables in
+Percona-enhanced servers. It joins the two together, grouped by the database
+and table name. It is the default view in \*(L"U: User Statistics\*(R" mode,
+and makes it easy to see what tables are hot, how many rows are read from indexes,
+how many changes are made, and how many changes are made to indexes.
+.IP "innodb_blocked_blocker" 4
+.IX Item "innodb_blocked_blocker"
+Displays InnoDB locks and lock waits. Data source: \*(L"\s-1INNODB_BLOCKED_BLOCKER\*(R"\s0.
+.IP "innodb_locks" 4
+.IX Item "innodb_locks"
+Displays InnoDB locks. Data source: \*(L"\s-1INNODB_LOCKS\*(R"\s0.
+.IP "innodb_transactions" 4
+.IX Item "innodb_transactions"
+Displays data about InnoDB's current transactions. Data source:
+\&\*(L"\s-1INNODB_TRANSACTIONS\*(R"\s0.
+.IP "insert_buffers" 4
+.IX Item "insert_buffers"
+Displays data about InnoDB's insert buffer. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "io_threads" 4
+.IX Item "io_threads"
+Displays data about InnoDB's I/O threads. Data source: \*(L"\s-1IO_THREADS\*(R"\s0.
+.IP "log_statistics" 4
+.IX Item "log_statistics"
+Displays data about InnoDB's logging system. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "master_status" 4
+.IX Item "master_status"
+Displays replication master status. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "open_tables" 4
+.IX Item "open_tables"
+Displays open tables. Data source: \*(L"\s-1OPEN_TABLES\*(R"\s0.
+.IP "page_statistics" 4
+.IX Item "page_statistics"
+Displays InnoDB page statistics. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "pending_io" 4
+.IX Item "pending_io"
+Displays InnoDB pending I/O operations. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "processlist" 4
+.IX Item "processlist"
+Displays current MySQL processes (threads/connections). Data source:
+\&\*(L"\s-1PROCESSLIST\*(R"\s0.
+.IP "q_header" 4
+.IX Item "q_header"
+Displays various status values. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "row_operation_misc" 4
+.IX Item "row_operation_misc"
+Displays data about InnoDB's row operations. Data source:
+\&\*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "row_operations" 4
+.IX Item "row_operations"
+Displays data about InnoDB's row operations. Data source:
+\&\*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "semaphores" 4
+.IX Item "semaphores"
+Displays data about InnoDB's semaphores and mutexes. Data source:
+\&\*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "slave_io_status" 4
+.IX Item "slave_io_status"
+Displays data about the slave I/O thread. Data source:
+\&\*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "slave_sql_status" 4
+.IX Item "slave_sql_status"
+Displays data about the slave \s-1SQL\s0 thread. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "table_statistics" 4
+.IX Item "table_statistics"
+Displays data from the \s-1TABLE_STATISTICS\s0 table in Percona-enhanced servers.
+.IP "t_header" 4
+.IX Item "t_header"
+Displays various InnoDB status values. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "var_status" 4
+.IX Item "var_status"
+Displays user-configurable data. Data source: \*(L"\s-1STATUS_VARIABLES\*(R"\s0.
+.IP "wait_array" 4
+.IX Item "wait_array"
+Displays data about InnoDB's \s-1OS\s0 wait array. Data source: \*(L"\s-1OS_WAIT_ARRAY\*(R"\s0.
+.SS "\s-1COLUMNS\s0"
+.IX Subsection "COLUMNS"
+Columns belong to tables. You can choose a table's columns by pressing the '^'
+key, which starts the \*(L"\s-1TABLE EDITOR\*(R"\s0 and lets you choose and edit columns.
+Pressing 'e' from within the table editor lets you edit the column's properties:
+.IP "\(bu" 4
+hdr: a column header. This appears in the first row of the table.
+.IP "\(bu" 4
+just: justification. '\-' means left-justified and '' means right-justified,
+just as with printf formatting codes (not a coincidence).
+.IP "\(bu" 4
+dec: whether to further align the column on the decimal point.
+.IP "\(bu" 4
+num: whether the column is numeric. This affects how values are sorted
+(lexically or numerically).
+.IP "\(bu" 4
+label: a small note about the column, which appears in dialogs that help the
+user choose columns.
+.IP "\(bu" 4
+src: an expression that innotop uses to extract the column's data from its
+source (see \*(L"\s-1DATA SOURCES\*(R"\s0). See \*(L"\s-1EXPRESSIONS\*(R"\s0 for more on expressions.
+.IP "\(bu" 4
+minw: specifies a minimum display width. This helps stabilize the display,
+which makes it easier to read if the data is changing frequently.
+.IP "\(bu" 4
+maxw: similar to minw.
+.IP "\(bu" 4
+trans: a list of column transformations. See \*(L"\s-1TRANSFORMATIONS\*(R"\s0.
+.IP "\(bu" 4
+agg: an aggregate function. See \*(L"\s-1GROUPING\*(R"\s0. The default is \*(L"first\*(R".
+.IP "\(bu" 4
+aggonly: controls whether the column only shows when grouping is enabled on the
+table (see \*(L"\s-1GROUPING\*(R"\s0). By default, this is disabled. This means columns
+will always be shown by default, whether grouping is enabled or not. If a
+column's aggonly is set true, the column will appear when you toggle grouping on
+the table. Several columns are set this way, such as the count column on
+\&\*(L"processlist\*(R" and \*(L"innodb_transactions\*(R", so you don't see a count when the
+grouping isn't enabled, but you do when it is.
+.IP "\(bu" 4
+agghide: the reverse of aggonly. The column is hidden when grouping is enabled.
+.SS "\s-1FILTERS\s0"
+.IX Subsection "FILTERS"
+Filters remove rows from the display. They behave much like a \s-1WHERE\s0 clause in
+\&\s-1SQL. \s0 innotop has several built-in filters, which remove irrelevant information
+like inactive queries, but you can define your own as well. innotop also lets
+you create quick-filters, which do not get saved to the configuration file, and
+are just an easy way to quickly view only some rows.
+.PP
+You can enable or disable a filter on any table. Press the '%' key (mnemonic: %
+looks kind of like a line being filtered between two circles) and choose which
+table you want to filter, if asked. You'll then see a list of possible filters
+and a list of filters currently enabled for that table. Type the names of
+filters you want to apply and press Enter.
+.PP
+\fIUSER-DEFINED \s-1FILTERS\s0\fR
+.IX Subsection "USER-DEFINED FILTERS"
+.PP
+If you type a name that doesn't exist, innotop will prompt you to create the
+filter. Filters are easy to create if you know Perl, and not hard if you don't.
+What you're doing is creating a subroutine that returns true if the row should
+be displayed. The row is a hash reference passed to your subroutine as \f(CW$set\fR.
+.PP
+For example, imagine you want to filter the processlist table so you only see
+queries that have been running more than five minutes. Type a new name for your
+filter, and when prompted for the subroutine body, press \s-1TAB\s0 to initiate your
+terminal's auto-completion. You'll see the names of the columns in the
+\&\*(L"processlist\*(R" table (innotop generally tries to help you with auto-completion
+lists). You want to filter on the 'time' column. Type the text \*(L"$set\->{time} >
+300\*(R" to return true when the query is more than five minutes old. That's all
+you need to do.
+.PP
+In other words, the code you're typing is surrounded by an implicit context,
+which looks like this:
+.PP
+.Vb 4
+\& sub filter {
+\& my ( $set ) = @_;
+\& # YOUR CODE HERE
+\& }
+.Ve
+.PP
+If your filter doesn't work, or if something else suddenly behaves differently,
+you might have made an error in your filter, and innotop is silently catching
+the error. Try enabling \*(L"debug\*(R" to make innotop throw an error instead.
+.PP
+\fIQUICK-FILTERS\fR
+.IX Subsection "QUICK-FILTERS"
+.PP
+innotop's quick-filters are a shortcut to create a temporary filter that doesn't
+persist when you restart innotop. To create a quick-filter, press the '/' key.
+innotop will prompt you for the column name and filter text. Again, you can use
+auto-completion on column names. The filter text can be just the text you want
+to \*(L"search for.\*(R" For example, to filter the \*(L"processlist\*(R" table on queries
+that refer to the products table, type '/' and then 'info product'. Internally,
+the filter is compiled into a subroutine like this:
+.PP
+.Vb 4
+\& sub filter {
+\& my ( $set ) = @_;
+\& $set\->{info} =~ m/product/;
+\& }
+.Ve
+.PP
+The filter text can actually be any Perl regular expression, but of course a
+literal string like 'product' works fine as a regular expression.
+.PP
+What if you want the filter to discard matching rows, rather than showing
+matching rows? If you're familiar with Perl regular expressions, you might
+guess how to do this. You have to use a zero-width negative lookahead
+assertion. If you don't know what that means, don't worry. Let's filter out
+all rows where the command is Gandalf. Type the following:
+.PP
+.Vb 2
+\& 1. /
+\& 2. cmd ^(?!Gandalf)
+.Ve
+.PP
+Behind the scenes innotop compiles the quick-filter into a specially tagged
+filter that is otherwise like any other filter. It just isn't saved to the
+configuration file.
+.PP
+To clear quick-filters, press the '\e' key and innotop will clear them all at
+once.
+.SS "\s-1SORTING\s0"
+.IX Subsection "SORTING"
+innotop has sensible built-in defaults to sort the most important rows to the
+top of the table. Like anything else in innotop, you can customize how any
+table is sorted.
+.PP
+To start the sort dialog, start the \*(L"\s-1TABLE EDITOR\*(R"\s0 with the '^' key, choose a
+table if necessary, and press the 's' key. You'll see a list of columns you can
+use in the sort expression and the current sort expression, if any. Enter a
+list of columns by which you want to sort and press Enter. If you want to
+reverse sort, prefix the column name with a minus sign. For example, if you
+want to sort by column a ascending, then column b descending, type 'a \-b'. You
+can also explicitly add a + in front of columns you want to sort ascending, but
+it's not required.
+.PP
+Some modes have keys mapped to open this dialog directly, and to quickly reverse
+sort direction. Press '?' as usual to see which keys are mapped in any mode.
+.SS "\s-1GROUPING\s0"
+.IX Subsection "GROUPING"
+innotop can group, or aggregate, rows together (the terms are used
+interchangeably). This is quite similar to an \s-1SQL GROUP BY\s0 clause. You can
+specify to group on certain columns, or if you don't specify any, the entire set
+of rows is treated as one group. This is quite like \s-1SQL\s0 so far, but unlike \s-1SQL,\s0
+you can also select un-grouped columns. innotop actually aggregates every
+column. If you don't explicitly specify a grouping function, the default is
+\&'first'. This is basically a convenience so you don't have to specify an
+aggregate function for every column you want in the result.
+.PP
+You can quickly toggle grouping on a table with the '=' key, which toggles its
+aggregate property. This property doesn't persist to the config file.
+.PP
+The columns by which the table is grouped are specified in its group_by
+property. When you turn grouping on, innotop places the group_by columns at the
+far left of the table, even if they're not supposed to be visible. The rest of
+the visible columns appear in order after them.
+.PP
+Two tables have default group_by lists and a count column built in:
+\&\*(L"processlist\*(R" and \*(L"innodb_transactions\*(R". The grouping is by connection
+and status, so you can quickly see how many queries or transactions are in a
+given status on each server you're monitoring. The time columns are aggregated
+as a sum; other columns are left at the default 'first' aggregation.
+.PP
+By default, the table shown in \*(L"S: Variables & Status\*(R" mode also uses
+grouping so you can monitor variables and status across many servers. The
+default aggregation function in this mode is 'avg'.
+.PP
+Valid grouping functions are defined in the \f(CW%agg_funcs\fR hash. They include
+.IP "first" 4
+.IX Item "first"
+Returns the first element in the group.
+.IP "count" 4
+.IX Item "count"
+Returns the number of elements in the group, including undefined elements, much
+like \s-1SQL\s0's \s-1COUNT\s0(*).
+.IP "avg" 4
+.IX Item "avg"
+Returns the average of defined elements in the group.
+.IP "sum" 4
+.IX Item "sum"
+Returns the sum of elements in the group.
+.PP
+Here's an example of grouping at work. Suppose you have a very busy server with
+hundreds of open connections, and you want to see how many connections are in
+what status. Using the built-in grouping rules, you can press 'Q' to enter
+\&\*(L"Q: Query List\*(R" mode. Press '=' to toggle grouping (if necessary, select the
+\&\*(L"processlist\*(R" table when prompted).
+.PP
+Your display might now look like the following:
+.PP
+.Vb 1
+\& Query List (? for help) localhost, 32:33, 0.11 QPS, 1 thd, 5.0.38\-log
+\&
+\& CXN Cmd Cnt ID User Host Time Query
+\& localhost Query 49 12933 webusr localhost 19:38 SELECT * FROM
+\& localhost Sending Da 23 2383 webusr localhost 12:43 SELECT col1,
+\& localhost Sleep 120 140 webusr localhost 5:18:12
+\& localhost Statistics 12 19213 webusr localhost 01:19 SELECT * FROM
+.Ve
+.PP
+That's actually quite a worrisome picture. You've got a lot of idle connections
+(Sleep), and some connections executing queries (Query and Sending Data).
+That's okay, but you also have a lot in Statistics status, collectively spending
+over a minute. That means the query optimizer is having a really hard time
+generating execution plans for your statements. Something is wrong; it should
+normally take milliseconds to plan queries. You might not have seen this pattern if you
+didn't look at your connections in aggregate. (This is a made-up example, but
+it can happen in real life).
+.SS "\s-1PIVOTING\s0"
+.IX Subsection "PIVOTING"
+innotop can pivot a table for more compact display, similar to a Pivot Table in
+a spreadsheet (also known as a crosstab). Pivoting a table makes columns into
+rows. Assume you start with this table:
+.PP
+.Vb 4
+\& foo bar
+\& === ===
+\& 1 3
+\& 2 4
+.Ve
+.PP
+After pivoting, the table will look like this:
+.PP
+.Vb 4
+\& name set0 set1
+\& ==== ==== ====
+\& foo 1 2
+\& bar 3 4
+.Ve
+.PP
+To get reasonable results, you might need to group as well as pivoting.
+innotop currently does this for \*(L"S: Variables & Status\*(R" mode.
+.SS "\s-1COLORS\s0"
+.IX Subsection "COLORS"
+By default, innotop highlights rows with color so you can see at a glance which
+rows are more important. You can customize the colorization rules and add your
+own to any table. Open the table editor with the '^' key, choose a table if
+needed, and press 'o' to open the color editor dialog.
+.PP
+The color editor dialog displays the rules applied to the table, in the order
+they are evaluated. Each row is evaluated against each rule to see if the rule
+matches the row; if it does, the row gets the specified color, and no further
+rules are evaluated. The rules look like the following:
+.PP
+.Vb 9
+\& state eq Locked black on_red
+\& cmd eq Sleep white
+\& user eq system user white
+\& cmd eq Connect white
+\& cmd eq Binlog Dump white
+\& time > 600 red
+\& time > 120 yellow
+\& time > 60 green
+\& time > 30 cyan
+.Ve
+.PP
+This is the default rule set for the \*(L"processlist\*(R" table. In order of
+priority, these rules make locked queries black on a red background, \*(L"gray out\*(R"
+connections from replication and sleeping queries, and make queries turn from
+cyan to red as they run longer.
+.PP
+(For some reason, the \s-1ANSI\s0 color code \*(L"white\*(R" is actually a light gray. Your
+terminal's display may vary; experiment to find colors you like).
+.PP
+You can use keystrokes to move the rules up and down, which re-orders their
+priority. You can also delete rules and add new ones. If you add a new rule,
+innotop prompts you for the column, an operator for the comparison, a value
+against which to compare the column, and a color to assign if the rule matches.
+There is auto-completion and prompting at each step.
+.PP
+The value in the third step needs to be correctly quoted. innotop does not try
+to quote the value because it doesn't know whether it should treat the value as
+a string or a number. If you want to compare the column against a string, as
+for example in the first rule above, you should enter 'Locked' surrounded by
+quotes. If you get an error message about a bareword, you probably should have
+quoted something.
+.SS "\s-1EXPRESSIONS\s0"
+.IX Subsection "EXPRESSIONS"
+Expressions are at the core of how innotop works, and are what enables you to
+extend innotop as you wish. Recall the table lifecycle explained in
+\&\*(L"\s-1TABLES\*(R"\s0. Expressions are used in the earliest step, where it extracts
+values from a data source to form rows.
+.PP
+It does this by calling a subroutine for each column, passing it the source data
+set, a set of current values, and a set of previous values. These are all
+needed so the subroutine can calculate things like the difference between this
+tick and the previous tick.
+.PP
+The subroutines that extract the data from the set are compiled from
+expressions. This gives significantly more power than just naming the values to
+fill the columns, because it allows the column's value to be calculated from
+whatever data is necessary, but avoids the need to write complicated and lengthy
+Perl code.
+.PP
+innotop begins with a string of text that can look as simple as a value's name
+or as complicated as a full-fledged Perl expression. It looks at each
+\&'bareword' token in the string and decides whether it's supposed to be a key
+into the \f(CW$set\fR hash. A bareword is an unquoted value that isn't already
+surrounded by code-ish things like dollar signs or curly brackets. If innotop
+decides that the bareword isn't a function or other valid Perl code, it converts
+it into a hash access. After the whole string is processed, innotop compiles a
+subroutine, like this:
+.PP
+.Vb 5
+\& sub compute_column_value {
+\& my ( $set, $cur, $pre ) = @_;
+\& my $val = # EXPANDED STRING GOES HERE
+\& return $val;
+\& }
+.Ve
+.PP
+Here's a concrete example, taken from the header table \*(L"q_header\*(R" in \*(L"Q:
+Query List\*(R" mode. This expression calculates the qps, or Queries Per Second,
+column's values, from the values returned by \s-1SHOW STATUS:\s0
+.PP
+.Vb 1
+\& Questions/Uptime_hires
+.Ve
+.PP
+innotop decides both words are barewords, and transforms this expression into
+the following Perl code:
+.PP
+.Vb 1
+\& $set\->{Questions}/$set\->{Uptime_hires}
+.Ve
+.PP
+When surrounded by the rest of the subroutine's code, this is executable Perl
+that calculates a high-resolution queries-per-second value.
+.PP
+The arguments to the subroutine are named \f(CW$set\fR, \f(CW$cur\fR, and \f(CW$pre\fR. In most cases,
+\&\f(CW$set\fR and \f(CW$cur\fR will be the same values. However, if \*(L"status_inc\*(R" is set, \f(CW$cur\fR
+will not be the same as \f(CW$set\fR, because \f(CW$set\fR will already contain values that are
+the incremental difference between \f(CW$cur\fR and \f(CW$pre\fR.
+.PP
+Every column in innotop is computed by subroutines compiled in the same fashion.
+There is no difference between innotop's built-in columns and user-defined
+columns. This keeps things consistent and predictable.
+.SS "\s-1TRANSFORMATIONS\s0"
+.IX Subsection "TRANSFORMATIONS"
+Transformations change how a value is rendered. For example, they can take a
+number of seconds and display it in H:M:S format. The following transformations
+are defined:
+.IP "commify" 4
+.IX Item "commify"
+Adds commas to large numbers every three decimal places.
+.IP "distill" 4
+.IX Item "distill"
+Distills \s-1SQL\s0 into verb-noun-noun format for quick comprehension.
+.IP "dulint_to_int" 4
+.IX Item "dulint_to_int"
+Accepts two unsigned integers and converts them into a single longlong. This is
+useful for certain operations with InnoDB, which uses two integers as
+transaction identifiers, for example.
+.IP "fuzzy_time" 4
+.IX Item "fuzzy_time"
+Converts a number of seconds into a friendly, readable value like \*(L"1h35m\*(R".
+.IP "no_ctrl_char" 4
+.IX Item "no_ctrl_char"
+Removes quoted control characters from the value. This is affected by the
+\&\*(L"charset\*(R" configuration variable.
+.Sp
+This transformation only operates within quoted strings, for example, values to
+a \s-1SET\s0 clause in an \s-1UPDATE\s0 statement. It will not alter the \s-1UPDATE\s0 statement,
+but will collapse the quoted string to [\s-1BINARY\s0] or [\s-1TEXT\s0], depending on the
+charset.
+.IP "percent" 4
+.IX Item "percent"
+Converts a number to a percentage by multiplying it by two, formatting it with
+\&\*(L"num_digits\*(R" digits after the decimal point, and optionally adding a percent
+sign (see \*(L"show_percent\*(R").
+.IP "secs_to_time" 4
+.IX Item "secs_to_time"
+Formats a number of seconds as time in days+hours:minutes:seconds format.
+.IP "set_precision" 4
+.IX Item "set_precision"
+Formats numbers with \*(L"num_digits\*(R" number of digits after the decimal point.
+.IP "shorten" 4
+.IX Item "shorten"
+Formats a number as a unit of 1024 (k/M/G/T) and with \*(L"num_digits\*(R" number of
+digits after the decimal point.
+.SS "\s-1TABLE EDITOR\s0"
+.IX Subsection "TABLE EDITOR"
+The innotop table editor lets you customize tables with keystrokes. You start
+the table editor with the '^' key. If there's more than one table on the
+screen, it will prompt you to choose one of them. Once you do, innotop will
+show you something like this:
+.PP
+.Vb 1
+\& Editing table definition for Buffer Pool. Press ? for help, q to quit.
+\&
+\& name hdr label src
+\& cxn CXN Connection from which cxn
+\& buf_pool_size Size Buffer pool size IB_bp_buf_poo
+\& buf_free Free Bufs Buffers free in the b IB_bp_buf_fre
+\& pages_total Pages Pages total IB_bp_pages_t
+\& pages_modified Dirty Pages Pages modified (dirty IB_bp_pages_m
+\& buf_pool_hit_rate Hit Rate Buffer pool hit rate IB_bp_buf_poo
+\& total_mem_alloc Memory Total memory allocate IB_bp_total_m
+\& add_pool_alloc Add\*(Aql Pool Additional pool alloca IB_bp_add_poo
+.Ve
+.PP
+The first line shows which table you're editing, and reminds you again to press
+\&'?' for a list of key mappings. The rest is a tabular representation of the
+table's columns, because that's likely what you're trying to edit. However, you
+can edit more than just the table's columns; this screen can start the filter
+editor, color rule editor, and more.
+.PP
+Each row in the display shows a single column in the table you're editing, along
+with a couple of its properties such as its header and source expression (see
+\&\*(L"\s-1EXPRESSIONS\*(R"\s0).
+.PP
+The key mappings are Vim-style, as in many other places. Pressing 'j' and 'k'
+moves the highlight up or down. You can then (d)elete or (e)dit the highlighted
+column. You can also (a)dd a column to the table. This actually just activates
+one of the columns already defined for the table; it prompts you to choose from
+among the columns available but not currently displayed. Finally, you can
+re-order the columns with the '+' and '\-' keys.
+.PP
+You can do more than just edit the columns with the table editor, you can also
+edit other properties, such as the table's sort expression and group-by
+expression. Press '?' to see the full list, of course.
+.PP
+If you want to really customize and create your own column, as opposed to just
+activating a built-in one that's not currently displayed, press the (n)ew key,
+and innotop will prompt you for the information it needs:
+.IP "\(bu" 4
+The column name: this needs to be a word without any funny characters, e.g. just
+letters, numbers and underscores.
+.IP "\(bu" 4
+The column header: this is the label that appears at the top of the column, in
+the table header. This can have spaces and funny characters, but be careful not
+to make it too wide and waste space on-screen.
+.IP "\(bu" 4
+The column's data source: this is an expression that determines what data from
+the source (see \*(L"\s-1TABLES\*(R"\s0) innotop will put into the column. This can just be
+the name of an item in the source, or it can be a more complex expression, as
+described in \*(L"\s-1EXPRESSIONS\*(R"\s0.
+.PP
+Once you've entered the required data, your table has a new column. There is no
+difference between this column and the built-in ones; it can have all the same
+properties and behaviors. innotop will write the column's definition to the
+configuration file, so it will persist across sessions.
+.PP
+Here's an example: suppose you want to track how many times your slaves have
+retried transactions. According to the MySQL manual, the
+Slave_retried_transactions status variable gives you that data: \*(L"The total
+number of times since startup that the replication slave \s-1SQL\s0 thread has retried
+transactions. This variable was added in version 5.0.4.\*(R" This is appropriate to
+add to the \*(L"slave_sql_status\*(R" table.
+.PP
+To add the column, switch to the replication-monitoring mode with the 'M' key,
+and press the '^' key to start the table editor. When prompted, choose
+slave_sql_status as the table, then press 'n' to create the column. Type
+\&'retries' as the column name, 'Retries' as the column header, and
+\&'Slave_retried_transactions' as the source. Now the column is created, and you
+see the table editor screen again. Press 'q' to exit the table editor, and
+you'll see your column at the end of the table.
+.SH "VARIABLE SETS"
+.IX Header "VARIABLE SETS"
+Variable sets are used in \*(L"S: Variables & Status\*(R" mode to define more easily
+what variables you want to monitor. Behind the scenes they are compiled to a
+list of expressions, and then into a column list so they can be treated just
+like columns in any other table, in terms of data extraction and
+transformations. However, you're protected from the tedious details by a syntax
+that ought to feel very natural to you: a \s-1SQL SELECT\s0 list.
+.PP
+The data source for variable sets, and indeed the entire S mode, is the
+combination of \s-1SHOW STATUS, SHOW VARIABLES,\s0 and \s-1SHOW INNODB STATUS. \s0 Imagine
+that you had a huge table with one column per variable returned from those
+statements. That's the data source for variable sets. You can now query this
+data source just like you'd expect. For example:
+.PP
+.Vb 1
+\& Questions, Uptime, Questions/Uptime as QPS
+.Ve
+.PP
+Behind the scenes innotop will split that variable set into three expressions,
+compile them and turn them into a table definition, then extract as usual. This
+becomes a \*(L"variable set,\*(R" or a \*(L"list of variables you want to monitor.\*(R"
+.PP
+innotop lets you name and save your variable sets, and writes them to the
+configuration file. You can choose which variable set you want to see with the
+\&'c' key, or activate the next and previous sets with the '>' and '<' keys.
+There are many built-in variable sets as well, which should give you a good
+start for creating your own. Press 'e' to edit the current variable set, or
+just to see how it's defined. To create a new one, just press 'c' and type its
+name.
+.PP
+You may want to use some of the functions listed in \*(L"\s-1TRANSFORMATIONS\*(R"\s0 to help
+format the results. In particular, \*(L"set_precision\*(R" is often useful to limit
+the number of digits you see. Extending the above example, here's how:
+.PP
+.Vb 1
+\& Questions, Uptime, set_precision(Questions/Uptime) as QPS
+.Ve
+.PP
+Actually, this still needs a little more work. If your \*(L"interval\*(R" is less
+than one second, you might be dividing by zero because Uptime is incremental in
+this mode by default. Instead, use Uptime_hires:
+.PP
+.Vb 1
+\& Questions, Uptime, set_precision(Questions/Uptime_hires) as QPS
+.Ve
+.PP
+This example is simple, but it shows how easy it is to choose which variables
+you want to monitor.
+.SH "PLUGINS"
+.IX Header "PLUGINS"
+innotop has a simple but powerful plugin mechanism by which you can extend
+or modify its existing functionality, and add new functionality. innotop's
+plugin functionality is event-based: plugins register themselves to be called
+when events happen. They then have a chance to influence the event.
+.PP
+An innotop plugin is a Perl module (.pm) file placed in innotop's \*(L"plugin_dir\*(R"
+directory. On \s-1UNIX\s0 systems, you can place a symbolic link to the module instead
+of putting the actual file there. innotop automatically discovers files named \f(CW\*(C`*.pm\*(C'\fR. If
+there is a corresponding entry in the \*(L"plugins\*(R" configuration file section,
+innotop loads and activates the plugin.
+.PP
+The module must conform to innotop's plugin interface. Additionally, the source
+code of the module must be written in such a way that innotop can inspect the
+file and determine the package name and description.
+.SS "Package Source Convention"
+.IX Subsection "Package Source Convention"
+innotop inspects the plugin module's source to determine the Perl package name.
+It looks for a line of the form \*(L"package Foo;\*(R" and if found, considers the
+plugin's package name to be Foo. Of course the package name can be a valid Perl
+package name such as Foo::Bar, with double colons (::) and so on.
+.PP
+It also looks for a description in the source code, to make the plugin editor
+more human-friendly. The description is a comment line of the form \*(L"#
+description: Foo\*(R", where \*(L"Foo\*(R" is the text innotop will consider to be the
+plugin's description.
+.SS "Plugin Interface"
+.IX Subsection "Plugin Interface"
+The innotop plugin interface is quite simple: innotop expects the plugin to be
+an object-oriented module it can call certain methods on. The methods are
+.IP "new(%variables)" 4
+.IX Item "new(%variables)"
+This is the plugin's constructor. It is passed a hash of innotop's variables,
+which it can manipulate (see \*(L"Plugin Variables\*(R"). It must return a reference
+to the newly created plugin object.
+.Sp
+At construction time, innotop has only loaded the general configuration and
+created the default built-in variables with their default contents (which is
+quite a lot). Therefore, the state of the program is exactly as in the innotop
+source code, plus the configuration variables from the \*(L"general\*(R" section in
+the config file.
+.Sp
+If your plugin manipulates the variables, it is changing global data, which is
+shared by innotop and all plugins. Plugins are loaded in the order they're
+listed in the config file. Your plugin may load before or after another plugin,
+so there is a potential for conflict or interaction between plugins if they
+modify data other plugins use or modify.
+.IP "\fIregister_for_events()\fR" 4
+.IX Item "register_for_events()"
+This method must return a list of events in which the plugin is interested, if
+any. See \*(L"Plugin Events\*(R" for the defined events. If the plugin returns an
+event that's not defined, the event is ignored.
+.IP "event handlers" 4
+.IX Item "event handlers"
+The plugin must implement a method named the same as each event for which it has
+registered. In other words, if the plugin returns qw(foo bar) from
+\&\fIregister_for_events()\fR, it must have \fIfoo()\fR and \fIbar()\fR methods. These methods are
+callbacks for the events. See \*(L"Plugin Events\*(R" for more details about each
+event.
+.SS "Plugin Variables"
+.IX Subsection "Plugin Variables"
+The plugin's constructor is passed a hash of innotop's variables, which it can
+manipulate. It is probably a good idea if the plugin object saves a copy of it
+for later use. The variables are defined in the innotop variable
+\&\f(CW%pluggable_vars\fR, and are as follows:
+.IP "action_for" 4
+.IX Item "action_for"
+A hashref of key mappings. These are innotop's global hot-keys.
+.IP "agg_funcs" 4
+.IX Item "agg_funcs"
+A hashref of functions that can be used for grouping. See \*(L"\s-1GROUPING\*(R"\s0.
+.IP "config" 4
+.IX Item "config"
+The global configuration hash.
+.IP "connections" 4
+.IX Item "connections"
+A hashref of connection specifications. These are just specifications of how to
+connect to a server.
+.IP "dbhs" 4
+.IX Item "dbhs"
+A hashref of innotop's database connections. These are actual \s-1DBI\s0 connection
+objects.
+.IP "filters" 4
+.IX Item "filters"
+A hashref of filters applied to table rows. See \*(L"\s-1FILTERS\*(R"\s0 for more.
+.IP "modes" 4
+.IX Item "modes"
+A hashref of modes. See \*(L"\s-1MODES\*(R"\s0 for more.
+.IP "server_groups" 4
+.IX Item "server_groups"
+A hashref of server groups. See \*(L"\s-1SERVER GROUPS\*(R"\s0.
+.IP "tbl_meta" 4
+.IX Item "tbl_meta"
+A hashref of innotop's table meta-data, with one entry per table (see
+\&\*(L"\s-1TABLES\*(R"\s0 for more information).
+.IP "trans_funcs" 4
+.IX Item "trans_funcs"
+A hashref of transformation functions. See \*(L"\s-1TRANSFORMATIONS\*(R"\s0.
+.IP "var_sets" 4
+.IX Item "var_sets"
+A hashref of variable sets. See \*(L"\s-1VARIABLE SETS\*(R"\s0.
+.SS "Plugin Events"
+.IX Subsection "Plugin Events"
+Each event is defined somewhere in the innotop source code. When innotop runs
+that code, it executes the callback function for each plugin that expressed its
+interest in the event. innotop passes some data for each event. The events are
+defined in the \f(CW%event_listener_for\fR variable, and are as follows:
+.ie n .IP "extract_values($set, $cur, $pre, $tbl)" 4
+.el .IP "extract_values($set, \f(CW$cur\fR, \f(CW$pre\fR, \f(CW$tbl\fR)" 4
+.IX Item "extract_values($set, $cur, $pre, $tbl)"
+This event occurs inside the function that extracts values from a data source.
+The arguments are the set of values, the current values, the previous values,
+and the table name.
+.IP "set_to_tbl" 4
+.IX Item "set_to_tbl"
+Events are defined at many places in this subroutine, which is responsible for
+turning an arrayref of hashrefs into an arrayref of lines that can be printed to
+the screen. The events all pass the same data: an arrayref of rows and the name
+of the table being created. The events are set_to_tbl_pre_filter,
+set_to_tbl_pre_sort,set_to_tbl_pre_group, set_to_tbl_pre_colorize,
+set_to_tbl_pre_transform, set_to_tbl_pre_pivot, set_to_tbl_pre_create,
+set_to_tbl_post_create.
+.IP "draw_screen($lines)" 4
+.IX Item "draw_screen($lines)"
+This event occurs inside the subroutine that prints the lines to the screen.
+\&\f(CW$lines\fR is an arrayref of strings.
+.SS "Simple Plugin Example"
+.IX Subsection "Simple Plugin Example"
+The easiest way to explain the plugin functionality is probably with a simple
+example. The following module adds a column to the beginning of every table and
+sets its value to 1. (If you copy and paste this example code, be sure to remove
+the first space from each line; lines such as '# description' must not start with
+whitespace).
+.PP
+.Vb 2
+\& use strict;
+\& use warnings FATAL => \*(Aqall\*(Aq;
+\&
+\& package Innotop::Plugin::Example;
+\& # description: Adds an \*(Aqexample\*(Aq column to every table
+\&
+\& sub new {
+\& my ( $class, %vars ) = @_;
+\& # Store reference to innotop\*(Aqs variables in $self
+\& my $self = bless { %vars }, $class;
+\&
+\& # Design the example column
+\& my $col = {
+\& hdr => \*(AqExample\*(Aq,
+\& just => \*(Aq\*(Aq,
+\& dec => 0,
+\& num => 1,
+\& label => \*(AqExample\*(Aq,
+\& src => \*(Aqexample\*(Aq, # Get data from this column in the data source
+\& tbl => \*(Aq\*(Aq,
+\& trans => [],
+\& };
+\&
+\& # Add the column to every table.
+\& my $tbl_meta = $vars{tbl_meta};
+\& foreach my $tbl ( values %$tbl_meta ) {
+\& # Add the column to the list of defined columns
+\& $tbl\->{cols}\->{example} = $col;
+\& # Add the column to the list of visible columns
+\& unshift @{$tbl\->{visible}}, \*(Aqexample\*(Aq;
+\& }
+\&
+\& # Be sure to return a reference to the object.
+\& return $self;
+\& }
+\&
+\& # I\*(Aqd like to be called when a data set is being rendered into a table, please.
+\& sub register_for_events {
+\& my ( $self ) = @_;
+\& return qw(set_to_tbl_pre_filter);
+\& }
+\&
+\& # This method will be called when the event fires.
+\& sub set_to_tbl_pre_filter {
+\& my ( $self, $rows, $tbl ) = @_;
+\& # Set the example column\*(Aqs data source to the value 1.
+\& foreach my $row ( @$rows ) {
+\& $row\->{example} = 1;
+\& }
+\& }
+\&
+\& 1;
+.Ve
+.SS "Plugin Editor"
+.IX Subsection "Plugin Editor"
+The plugin editor lets you view the plugins innotop discovered and activate or
+deactivate them. Start the editor by pressing $ to start the configuration
+editor from any mode. Press the 'p' key to start the plugin editor. You'll see
+a list of plugins innotop discovered. You can use the 'j' and 'k' keys to move
+the highlight to the desired one, then press the * key to toggle it active or
+inactive. Exit the editor and restart innotop for the changes to take effect.
+.SH "SQL STATEMENTS"
+.IX Header "SQL STATEMENTS"
+innotop uses a limited set of \s-1SQL\s0 statements to retrieve data from MySQL for
+display. The statements are customized depending on the server version against
+which they are executed; for example, on MySQL 5 and newer, \s-1INNODB_STATUS\s0
+executes \*(L"\s-1SHOW ENGINE INNODB STATUS\*(R",\s0 while on earlier versions it executes
+\&\*(L"\s-1SHOW INNODB STATUS\*(R". \s0 The statements are as follows:
+.PP
+.Vb 10
+\& Statement SQL executed
+\& =================== ===============================
+\& INDEX_STATISTICS SELECT * FROM INFORMATION_SCHEMA.INDEX_STATISTICS
+\& INNODB_STATUS SHOW [ENGINE] INNODB STATUS
+\& KILL_CONNECTION KILL
+\& KILL_QUERY KILL QUERY
+\& OPEN_TABLES SHOW OPEN TABLES
+\& PROCESSLIST SHOW FULL PROCESSLIST
+\& SHOW_MASTER_LOGS SHOW MASTER LOGS
+\& SHOW_MASTER_STATUS SHOW MASTER STATUS
+\& SHOW_SLAVE_STATUS SHOW SLAVE STATUS
+\& SHOW_STATUS SHOW [GLOBAL] STATUS
+\& SHOW_VARIABLES SHOW [GLOBAL] VARIABLES
+\& TABLE_STATISTICS SELECT * FROM INFORMATION_SCHEMA.TABLE_STATISTICS
+.Ve
+.SH "DATA SOURCES"
+.IX Header "DATA SOURCES"
+Each time innotop extracts values to create a table (see \*(L"\s-1EXPRESSIONS\*(R"\s0 and
+\&\*(L"\s-1TABLES\*(R"\s0), it does so from a particular data source. Largely because of the
+complex data extracted from \s-1SHOW INNODB STATUS,\s0 this is slightly messy. \s-1SHOW
+INNODB STATUS\s0 contains a mixture of single values and repeated values that form
+nested data sets.
+.PP
+Whenever innotop fetches data from MySQL, it adds two extra bits to each set:
+cxn and Uptime_hires. cxn is the name of the connection from which the data
+came. Uptime_hires is a high-resolution version of the server's Uptime status
+variable, which is important if your \*(L"interval\*(R" setting is sub-second.
+.PP
+Here are the kinds of data sources from which data is extracted:
+.IP "\s-1STATUS_VARIABLES\s0" 4
+.IX Item "STATUS_VARIABLES"
+This is the broadest category, into which the most kinds of data fall. It
+begins with the combination of \s-1SHOW STATUS\s0 and \s-1SHOW VARIABLES,\s0 but other sources
+may be included as needed, for example, \s-1SHOW MASTER STATUS\s0 and \s-1SHOW SLAVE
+STATUS,\s0 as well as many of the non-repeated values from \s-1SHOW INNODB STATUS.\s0
+.IP "\s-1DEADLOCK_LOCKS\s0" 4
+.IX Item "DEADLOCK_LOCKS"
+This data is extracted from the transaction list in the \s-1LATEST DETECTED DEADLOCK\s0
+section of \s-1SHOW INNODB STATUS. \s0 It is nested two levels deep: transactions, then
+locks.
+.IP "\s-1DEADLOCK_TRANSACTIONS\s0" 4
+.IX Item "DEADLOCK_TRANSACTIONS"
+This data is from the transaction list in the \s-1LATEST DETECTED DEADLOCK\s0
+section of \s-1SHOW INNODB STATUS. \s0 It is nested one level deep.
+.IP "\s-1EXPLAIN\s0" 4
+.IX Item "EXPLAIN"
+This data is from the result set returned by \s-1EXPLAIN.\s0
+.IP "\s-1INNODB_BLOCKED_BLOCKER\s0" 4
+.IX Item "INNODB_BLOCKED_BLOCKER"
+This data is from the \s-1INFORMATION_SCHEMA\s0 tables related to InnoDB locks and
+the processlist.
+.IP "\s-1INNODB_TRANSACTIONS\s0" 4
+.IX Item "INNODB_TRANSACTIONS"
+This data is from the \s-1TRANSACTIONS\s0 section of \s-1SHOW INNODB STATUS.\s0
+.IP "\s-1IO_THREADS\s0" 4
+.IX Item "IO_THREADS"
+This data is from the list of threads in the \s-1FILE I/O\s0 section of \s-1SHOW INNODB
+STATUS.\s0
+.IP "\s-1INNODB_LOCKS\s0" 4
+.IX Item "INNODB_LOCKS"
+This data is from the \s-1TRANSACTIONS\s0 section of \s-1SHOW INNODB STATUS\s0 and is nested
+two levels deep.
+.IP "\s-1MASTER_SLAVE\s0" 4
+.IX Item "MASTER_SLAVE"
+This data is from the combination of \s-1SHOW MASTER STATUS\s0 and \s-1SHOW SLAVE STATUS.\s0
+.IP "\s-1OPEN_TABLES\s0" 4
+.IX Item "OPEN_TABLES"
+This data is from \s-1SHOW OPEN TABLES.\s0
+.IP "\s-1PROCESSLIST\s0" 4
+.IX Item "PROCESSLIST"
+This data is from \s-1SHOW FULL PROCESSLIST.\s0
+.IP "\s-1PROCESSLIST_STATS\s0" 4
+.IX Item "PROCESSLIST_STATS"
+This data is from \s-1SHOW FULL PROCESSLIST\s0 and computes stats such as the maximum time
+a user query has been running, and how many user queries are running. A \*(L"user
+query\*(R" excludes replication threads.
+.IP "\s-1OS_WAIT_ARRAY\s0" 4
+.IX Item "OS_WAIT_ARRAY"
+This data is from the \s-1SEMAPHORES\s0 section of \s-1SHOW INNODB STATUS\s0 and is nested one
+level deep. It comes from the lines that look like this:
+.Sp
+.Vb 1
+\& \-\-Thread 1568861104 has waited at btr0cur.c line 424 ....
+.Ve
+.SH "MYSQL PRIVILEGES"
+.IX Header "MYSQL PRIVILEGES"
+.IP "\(bu" 4
+You must connect to MySQL as a user who has the \s-1SUPER\s0 privilege for many of the
+functions.
+.IP "\(bu" 4
+If you don't have the \s-1SUPER\s0 privilege, you can still run some functions, but you
+won't necessarily see all the same data.
+.IP "\(bu" 4
+You need the \s-1PROCESS\s0 privilege to see the list of currently running queries in Q
+mode.
+.IP "\(bu" 4
+You need special privileges to start and stop slave servers.
+.IP "\(bu" 4
+You need appropriate privileges to create and drop the deadlock tables if needed
+(see \*(L"\s-1SERVER CONNECTIONS\*(R"\s0).
+.SH "SYSTEM REQUIREMENTS"
+.IX Header "SYSTEM REQUIREMENTS"
+You need Perl to run innotop, of course. You also need a few Perl modules: \s-1DBI,\s0
+DBD::MariaDB, Term::ReadKey, and Time::HiRes. These should be included with most
+Perl distributions, but in case they are not, I recommend using versions
+distributed with your operating system or Perl distribution, not from \s-1CPAN.\s0
+Term::ReadKey in particular has been known to cause problems if installed from
+\&\s-1CPAN.\s0
+.PP
+If you have Term::ANSIColor, innotop will use it to format headers more readably
+and compactly. (Under Microsoft Windows, you also need Win32::Console::ANSI for
+terminal formatting codes to be honored). If you install Term::ReadLine,
+preferably Term::ReadLine::Gnu, you'll get nice auto-completion support.
+.PP
+I run innotop on Gentoo GNU/Linux, Debian and Ubuntu, and I've had feedback from
+people successfully running it on Red Hat, CentOS, Solaris, and Mac \s-1OSX. I\s0
+don't see any reason why it won't work on other UNIX-ish operating systems, but
+I don't know for sure. It also runs on Windows under ActivePerl without
+problem.
+.PP
+innotop has been used on MySQL versions 3.23.58, 4.0.27, 4.1.0, 4.1.22, 5.0.26,
+5.1.15, and 5.2.3. If it doesn't run correctly for you, that is a bug that
+should be reported.
+.SH "FILES"
+.IX Header "FILES"
+\&\f(CW$HOMEDIR\fR/.innotop and/or /etc/innotop are used to store
+configuration information. Files include the configuration file innotop.conf,
+the core_dump file which contains verbose error messages if \*(L"debug\*(R" is
+enabled, and the plugins/ subdirectory.
+.SH "GLOSSARY OF TERMS"
+.IX Header "GLOSSARY OF TERMS"
+.IP "tick" 4
+.IX Item "tick"
+A tick is a refresh event, when innotop re-fetches data from connections and
+displays it.
+.SH "ACKNOWLEDGEMENTS"
+.IX Header "ACKNOWLEDGEMENTS"
+The following people and organizations are acknowledged for various reasons.
+Hopefully no one has been forgotten.
+.PP
+Aaron Racine,
+Allen K. Smith,
+Aurimas Mikalauskas,
+Bartosz Fenski,
+Brian Miezejewski,
+Christian Hammers,
+Cyril Scetbon,
+Dane Miller,
+David Multer,
+Dr. Frank Ullrich,
+Giuseppe Maxia,
+Google.com Site Reliability Engineers,
+Google Code,
+Jan Pieter Kunst,
+Jari Aalto,
+Jay Pipes,
+Jeremy Zawodny,
+Johan Idren,
+Kristian Kohntopp,
+Lenz Grimmer,
+Maciej Dobrzanski,
+Michiel Betel,
+MySQL \s-1AB,\s0
+Paul McCullagh,
+Sebastien Estienne,
+Sourceforge.net,
+Steven Kreuzer,
+The Gentoo MySQL Team,
+Trevor Price,
+Yaar Schnitman,
+and probably more people that have not been included.
+.PP
+(If your name has been misspelled, it's probably out of fear of putting
+international characters into this documentation; earlier versions of Perl might
+not be able to compile it then).
+.SH "COPYRIGHT, LICENSE AND WARRANTY"
+.IX Header "COPYRIGHT, LICENSE AND WARRANTY"
+This program is copyright (c) 2006 Baron Schwartz.
+Feedback and improvements are welcome.
+.PP
+\&\s-1THIS PROGRAM IS PROVIDED \*(L"AS IS\*(R" AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
++MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.\s0
+.PP
+This program is free software; you can redistribute it and/or modify it under
+the terms of the \s-1GNU\s0 General Public License as published by the Free Software
+Foundation, version 2; \s-1OR\s0 the Perl Artistic License. On \s-1UNIX\s0 and similar
+systems, you can issue `man perlgpl' or `man perlartistic' to read these
+licenses.
+.PP
+You should have received a copy of the \s-1GNU\s0 General Public License along with
+this program; if not, write to the Free Software Foundation, Inc., 51 Franklin
+Street, Fifth Floor, Boston, \s-1MA 02110-1335 USA\s0.
+.PP
+Execute innotop and press '!' to see this information at any time.
+.SH "AUTHOR"
+.IX Header "AUTHOR"
+Originally written by Baron Schwartz; currently maintained by Aaron Racine.
+.SH "BUGS"
+.IX Header "BUGS"
+You can report bugs, ask for improvements, and get other help and support at
+<https://github.com/innotop/innotop>. There are mailing lists, a source code
+browser, a bug tracker, etc. Please use these instead of contacting the
+maintainer or author directly, as it makes our job easier and benefits others if the
+discussions are permanent and public. Of course, if you need to contact us in
+private, please do.
--- /dev/null
--- /dev/null
++# NOTE: THIS FILE IS READ ONLY BY THE TRADITIONAL SYSV INIT SCRIPT, NOT SYSTEMD.
++# MARIADB SYSTEMD DOES _NOT_ UTILIZE MYSQLD_SAFE NOR READ THIS FILE.
++#
++# For similar behavior, systemd users should create the following file:
++# /etc/systemd/system/mariadb.service.d/migrated-from-my.cnf-settings.conf
++#
++# To achieve the same result as the default 50-mysqld_safe.cnf, please create
++# /etc/systemd/system/mariadb.service.d/migrated-from-my.cnf-settings.conf
++# with the following contents:
++#
++# [Service]
++# User = mysql
++# StandardOutput = syslog
++# StandardError = syslog
++# SyslogFacility = daemon
++# SyslogLevel = err
++# SyslogIdentifier = mysqld
++#
++# For more information, please read https://mariadb.com/kb/en/mariadb/systemd/
++
++[mysqld_safe]
++# This will be passed to all mysql clients
++# It has been reported that passwords should be enclosed with ticks/quotes
++# especially if they contain "#" chars...
++
++nice = 0
++skip_log_error
++syslog
--- /dev/null
- # Error logging goes via stdout/stderr, which on systemd systems goes to
- # journald.
+#
+# These groups are read by MariaDB server.
+# Use it for options that only the server (but not clients) should see
+
+# this is read by the standalone daemon and embedded servers
+[server]
+
+# this is only for the mariadbd daemon
+[mariadbd]
+
+#
+# * Basic Settings
+#
+
+#user = mysql
+pid-file = /run/mysqld/mysqld.pid
+basedir = /usr
+#datadir = /var/lib/mysql
+#tmpdir = /tmp
+
+# Broken reverse DNS slows down connections considerably and name resolve is
+# safe to skip if there are no "host by domain name" access grants
+#skip-name-resolve
+
+# Instead of skip-networking the default is now to listen only on
+# localhost which is more compatible and is not less secure.
+bind-address = 127.0.0.1
+
+#
+# * Fine Tuning
+#
+
+#key_buffer_size = 128M
+#max_allowed_packet = 1G
+#thread_stack = 192K
+#thread_cache_size = 8
+# This replaces the startup script and checks MyISAM tables if needed
+# the first time they are touched
+#myisam_recover_options = BACKUP
+#max_connections = 100
+#table_cache = 64
+
+#
+# * Logging and Replication
+#
+
+# Note: The configured log file or its directory need to be created
+# and be writable by the mysql user, e.g.:
+# $ sudo mkdir -m 2750 /var/log/mysql
+# $ sudo chown mysql /var/log/mysql
+
+# Both location gets rotated by the cronjob.
+# Be aware that this log type is a performance killer.
+# Recommend only changing this at runtime for short testing periods if needed!
+#general_log_file = /var/log/mysql/mysql.log
+#general_log = 1
+
++# When running under systemd, error logging goes via stdout/stderr to journald
++# and when running legacy init error logging goes to syslog due to
++# /etc/mysql/conf.d/mariadb.conf.d/50-mysqld_safe.cnf
+# Enable this if you want to have error logging into a separate file
+#log_error = /var/log/mysql/error.log
+# Enable the slow query log to see queries with especially long duration
+#log_slow_query_file = /var/log/mysql/mariadb-slow.log
+#log_slow_query_time = 10
+#log_slow_verbosity = query_plan,explain
+#log-queries-not-using-indexes
+#log_slow_min_examined_row_limit = 1000
+
+# The following can be used as easy to replay backup logs or for replication.
+# note: if you are setting up a replica, see README.Debian about other
+# settings you may need to change.
+#server-id = 1
+#log_bin = /var/log/mysql/mysql-bin.log
+expire_logs_days = 10
+#max_binlog_size = 100M
+
+#
+# * SSL/TLS
+#
+
+# For documentation, please read
+# https://mariadb.com/kb/en/securing-connections-for-client-and-server/
+#ssl-ca = /etc/mysql/cacert.pem
+#ssl-cert = /etc/mysql/server-cert.pem
+#ssl-key = /etc/mysql/server-key.pem
+#require-secure-transport = on
+
+#
+# * Character sets
+#
+
+# MariaDB default is now utf8 4-byte character set.
+# No Debian specific default is required.
+
+#
+# * InnoDB
+#
+
+# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
+# Read the manual for more InnoDB related options. There are many!
+# Most important is to give InnoDB 80 % of the system RAM for buffer use:
+# https://mariadb.com/kb/en/innodb-system-variables/#innodb_buffer_pool_size
+#innodb_buffer_pool_size = 8G
+
+# this is only for embedded server
+[embedded]
+
+# This group is only read by MariaDB servers, not by MySQL.
+# If you use the same .cnf file for MySQL and MariaDB,
+# you can put MariaDB-only options here
+[mariadbd]
+
+# This group is only read by MariaDB-11.8 servers.
+# If you use the same .cnf file for MariaDB of different versions,
+# use this group for options that older servers don't understand
+[mariadb-11.8]
--- /dev/null
- # See the examples of server wsrep.cnf files in /usr/share/mariadb
- # and read more at https://mariadb.com/kb/en/galera-cluster/
+#
+# * Galera-related settings
+#
- # Mandatory settings
- #wsrep_on = ON
++# See the examples of server wsrep.cnf files in /usr/share/mariadb and read
++# more at https://mariadb.com/kb/en/galera-cluster/ and
++# https://mariadb.com/kb/en/configuring-mariadb-galera-cluster/
+
+[galera]
- #binlog_format = row
+#wsrep_cluster_name = "MariaDB Galera Cluster"
++
++# Mandatory settings
++#wsrep_provider = /usr/lib/galera/libgalera_smm.so
+#wsrep_cluster_address = gcomm://
- #innodb_autoinc_lock_mode = 2
++#binlog_format = ROW
++#wsrep_on = ON
+#default_storage_engine = InnoDB
- # Optional settings
- #wsrep_slave_threads = 1
+
+# Allow server to accept connections on all interfaces.
+#bind-address = 0.0.0.0
+
++# Performance related settings
++#innodb_autoinc_lock_mode = 2
+#innodb_flush_log_at_trx_commit = 0
++#wsrep_slave_threads = 1
--- /dev/null
- attach_file(report,'/etc/apparmor.d/usr.sbin.mariadbd')
+'''apport package hook for mariadb
+
+(c) 2009 Canonical Ltd.
+Author: Mathias Gug <mathias.gug@canonical.com>
+'''
+
+from __future__ import print_function, unicode_literals
+import os, os.path
+
+from apport.hookutils import path_to_key, read_file, attach_conffiles, attach_mac_events, attach_file
+
+def _add_my_conf_files(report, filename):
+ key = 'MySQLConf' + path_to_key(filename)
+ report[key] = ""
+ for line in read_file(filename).split('\n'):
+ try:
+ if 'password' in line.split('=')[0]:
+ line = "%s = @@APPORTREPLACED@@" % (line.split('=')[0])
+ report[key] += line + '\n'
+ except IndexError:
+ continue
+
+def add_info(report):
+ attach_conffiles(report, 'mariadb-server', conffiles=None)
+ key = 'Logs' + path_to_key('/var/log/daemon.log')
+ report[key] = ""
+ for line in read_file('/var/log/daemon.log').split('\n'):
+ try:
+ if 'mariadbd' in line.split()[4]:
+ report[key] += line + '\n'
+ except IndexError:
+ continue
+ if os.path.exists('/var/log/mysql/error.log'):
+ key = 'Logs' + path_to_key('/var/log/mysql/error.log')
+ report[key] = ""
+ for line in read_file('/var/log/mysql/error.log').split('\n'):
+ report[key] += line + '\n'
+ attach_mac_events(report, '/usr/sbin/mariadbd')
++ attach_file(report,'/etc/apparmor.d/mariadbd')
+ _add_my_conf_files(report, '/etc/mysql/mariadb.cnf')
+ for f in os.listdir('/etc/mysql/conf.d'):
+ _add_my_conf_files(report, os.path.join('/etc/mysql/conf.d', f))
+ for f in os.listdir('/etc/mysql/mariadb.conf.d'):
+ _add_my_conf_files(report, os.path.join('/etc/mysql/mariadb.conf.d', f))
+ try:
+ report['MySQLVarLibDirListing'] = str(os.listdir('/var/lib/mysql'))
+ except OSError:
+ report['MySQLVarLibDirListing'] = str(False)
+
+if __name__ == '__main__':
+ report = {}
+ add_info(report)
+ for key in report:
+ print('%s: %s' % (key, report[key].split('\n', 1)[0]))
--- /dev/null
--- /dev/null
++# AppArmor profile for MariaDB 11.8 server daemon
++#
++# TESTING:
++# - Monitor denials: journalctl -k --since=yesterday --follow --grep="apparmor"
++# - Test in complain mode first: aa-complain /etc/apparmor.d/mariadbd
++# - See confinement status: aa-status | grep -C 10 mariadb
++# - Check specific denials: aa-logprof
++# - Test all server functionality: systemctl restart mariadb
++# - Verify plugin loading, backups, replication, all packaged Galera SST
++# mechanisms (both donor + joiner), etc.
++#
++# CONTAINMENT ERRORS:
++# - Check syslog/journal for "apparmor=denied" messages
++# - Look for "operation=open" denials for file access
++# - Check for "operation=exec" denials for program execution
++# - Monitor /var/log/audit/audit.log if auditd is installed
++#
++# PROFILE UPDATE WORKFLOW:
++# 1. Identify denial in logs (operation, path, requested_mask)
++# 2. Add appropriate rule to this profile
++# 3. Reload profile: apparmor_parser -r /etc/apparmor.d/mariadbd
++# 4. Test again in complain mode
++# 5. Switch to enforce mode when confident: aa-enforce /etc/apparmor.d/mariadbd
++# 6. Consider adding site-specific rules to /etc/apparmor.d/local/mariadbd
++
++# Define RUN, HOMEDIRS etc globally
++include <tunables/global>
++
++profile mariadbd /usr/sbin/mariadbd flags=(complain) {
++
++ # Including <abstractions/base> does not work on Ubuntu 24.04. The issue was
++ # fixed upstream https://gitlab.com/apparmor/apparmor/-/merge_requests/1236
++ # but has not landed on ubuntu 24.04 yet (tracking in
++ # https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/2065685)
++ include <abstractions/base>
++ include <abstractions/nameservice>
++ include <abstractions/user-tmp>
++ include <abstractions/mysql>
++ include <abstractions/winbind>
++
++ # Minimal essential rules traditionally provided by abstractions/base
++ # These rules are commonly needed by system services and avoid the passt inclusion
++ capability chown,
++ capability fowner,
++ # per systemd service file is used with --memlock to lock memory beyond the usual rlimit
++ capability ipc_lock,
++ # Galera gu_thread_setschedparam still uses this
++ capability sys_nice,
++ capability kill,
++ network inet stream,
++ network inet dgram,
++ network unix stream,
++ # Probably excessive/unnecessary:
++ #@{PROC}/sys/kernel/ngroups_max r,
++ #@{PROC}/@{pid}/fd/ r,
++ #@{PROC}/@{pid}/stat r,
++
++# Allow system resource access
++ @{PROC}/@{pid}/cgroup r,
++ @{PROC}/@{pid}/status r,
++ @{PROC}/sys/kernel/core_pattern r,
++ @{sys}/block/** r,
++ @{sys}/block/*/queue/** r,
++ @{sys}/devices/**/queue/** r,
++ @{sys}/devices/system/cpu/ r,
++ @{sys}/devices/system/node/ r,
++ @{sys}/devices/system/node/** r,
++
++ # Should not be necessary according to Daniel Black:
++ #capability dac_override,
++ #capability dac_read_search,
++ # Should not be necessary as mariadbd does not run as root:
++ #capability setuid,
++ #capability setgid,
++
++# Allow network access
++ network tcp,
++
++# Allow config access
++ /etc/mysql/** r,
++ /etc/systemd/system/mariadb.service.d/ r,
++ /etc/systemd/system/mariadb.service.d/** r,
++
++# Allow pid, socket, socket lock file access
++ /run/mysqld/mysqld.pid rw,
++ /run/mysqld/mysqld.sock rw,
++ /run/mysqld/mysqld.sock.lock rw,
++
++# Allow systemd notify messages
++ /run/systemd/notify w,
++ /run/systemd/private rw,
++
++# Allow execution of server binary
++ /usr/sbin/mariadbd mr,
++ /usr/sbin/mysqld mr,
++
++# Allow plugin access
++ /usr/lib/{@{multiarch},mysql}/mariadb{,d}/plugin/ r,
++ /usr/lib/{@{multiarch},mysql}/mariadb{,d}/plugin/*.so* mr,
++ /usr/lib/mysql/plugin/ r,
++ /usr/lib/mysql/plugin/*.so* mr,
++
++# Allow error msg and charset access
++ /usr/share/mariadb/ r,
++ /usr/share/mariadb/** r,
++
++# Allow data dir access
++ /var/lib/mariadb/ r,
++ /var/lib/mariadb/** rwk,
++ /var/lib/mysql/ r,
++ /var/lib/mysql/** rwk,
++
++# Allow log file access
++ /var/log/mariadb/ r,
++ /var/log/mariadb/** rw,
++ /var/log/mysql/ r,
++ /var/log/mysql/** rw,
++
++# Allow shared memory access
++ /{run,dev}/shm/** rw,
++ # More specific shared memory for MariaDB
++ /run/mysqld/* rw,
++
++# Allow read access to OpenSSL config
++ /etc/ssl/openssl.cnf r,
++
++# Memory pressure detection
++ @{sys}/fs/cgroup/**/memory.pressure rw,
++
++# For huge/large page support
++ @{sys}/kernel/mm/hugepages/ r,
++ @{sys}/kernel/mm/hugepages/** r,
++
++# Innodb physical disk size introspection
++ @{sys}/dev/block/*/queue/physical_block_size r,
++ @{sys}/devices/**/queue/physical_block_size r,
++
++# Deny invalid runbindable mount rule that causes parser errors
++# This broad deny rule should override any problematic mount operations
++# that might be included from system abstractions
++ audit deny mount options=(runbindable),
++
++ # Site-specific additions and overrides. See local/README for details.
++ include if exists <local/mariadbd>
++}
--- /dev/null
- remove_uring()
+#!/bin/bash
+#
+# Build MariaDB .deb packages for test and release at mariadb.org
+#
+# Purpose of this script:
+# Always keep the actual packaging as up-to-date as possible following the latest
+# Debian policy and targeting Debian Sid. Then case-by-case run in autobake-deb.sh
+# tests for backwards compatibility and strip away parts on older builders or
+# specific build environments.
+
+# Exit immediately on any error
+set -e
+
+# On Buildbot, don't run the mysql-test-run test suite as part of build.
+# It takes a lot of time, and we will do a better test anyway in
+# Buildbot, running the test suite from installed .debs on a clean VM.
+export DEB_BUILD_OPTIONS="nocheck $DEB_BUILD_OPTIONS"
+
+# shellcheck source=/dev/null
+source ./VERSION
+
+# Look up distro-version specific stuff
+#
+# Always keep the actual packaging as up-to-date as possible following the latest
+# Debian policy and targeting Debian Sid. Then case-by-case run in autobake-deb.sh
+# tests for backwards compatibility and strip away parts on older builders.
+
+remove_rocksdb_tools()
+{
+ sed '/rocksdb-tools/d' -i debian/control
+ sed '/sst_dump/d' -i debian/not-installed
+ if ! grep -q sst_dump debian/mariadb-plugin-rocksdb.install
+ then
+ echo "usr/bin/sst_dump" >> debian/mariadb-plugin-rocksdb.install
+ fi
+}
+
+add_lsb_base_depends()
+{
+ # Make sure one can run this multiple times remove
+ # lines 'sysvinit-utils' and 'lsb-base'.
+ sed -e '/sysvinit-utils/d' -e '/lsb-base/d' -i debian/control
+ # Add back lsb-base before lsof
+ sed -e 's#lsof #lsb-base (>= 3.0-10),\n lsof #' -i debian/control
+}
+
- sed -e '/liburing-dev/d' -i debian/control
- sed -e '/-DWITH_URING=ON/d' -i debian/rules
++replace_uring_with_aio()
+{
- uname_machine=$(uname -m)
++ sed 's/liburing-dev/libaio-dev/g' -i debian/control
++ sed -e '/-DIGNORE_AIO_CHECK=ON/d' \
++ -e '/-DWITH_URING=ON/d' -i debian/rules
+}
+
+disable_libfmt()
+{
+ # 7.0+ required
+ sed '/libfmt-dev/d' -i debian/control
+}
+
+remove_package_notes()
+{
+ # binutils >=2.39 + disto makefile /usr/share/debhelper/dh_package_notes/package-notes.mk
+ sed -e '/package.notes/d' -i debian/rules debian/control
+}
+
+architecture=$(dpkg-architecture -q DEB_BUILD_ARCH)
- remove_uring
+
+# Parse release name and number from Linux standard base release
+# Example:
+# $ lsb_release -a
+# No LSB modules are available.
+# Distributor ID: Debian
+# Description: Debian GNU/Linux bookworm/sid
+# Release: n/a
+# Codename: n/a
+LSBID="$(lsb_release -si | tr '[:upper:]' '[:lower:]')"
+LSBVERSION="$(lsb_release -sr | sed -e "s/\.//g")"
+LSBNAME="$(lsb_release -sc)"
+
+# If 'n/a', assume 'sid'
+if [ "${LSBVERSION}" == "n/a" ] || [ "${LSBNAME}" == "n/a" ]
+then
+ LSBVERSION="sid"
+ LSBNAME="sid"
+fi
+
+# If not known, use 'unknown' in .deb version identifier
+if [ -z "${LSBID}" ]
+then
+ LSBID="unknown"
+fi
+
+case "${LSBNAME}"
+in
+ # Debian
+ "buster")
+ disable_libfmt
- remove_uring
++ replace_uring_with_aio
+ ;&
+ "bullseye")
+ add_lsb_base_depends
+ remove_package_notes
+ ;&
+ "bookworm")
+ # mariadb-plugin-rocksdb in control is 4 arches covered by the distro rocksdb-tools
+ # so no removal is necessary.
+ if [[ ! "$architecture" =~ amd64|arm64|armel|armhf|i386|mips64el|mipsel|ppc64el|s390x ]]
+ then
- "trixie"|"forky"|"duke"|"sid")
++ replace_uring_with_aio
+ fi
+ ;&
- remove_uring
++ "trixie"|"sid")
+ # The default packaging should always target Debian Sid, so in this case
+ # there is intentionally no customizations whatsoever.
+ ;;
+ # Ubuntu
+ "focal")
++ replace_uring_with_aio
+ disable_libfmt
- "noble"|"oracular"|"plucky"|"questing"|"resolute")
+ ;&
+ "jammy"|"kinetic")
+ add_lsb_base_depends
+ remove_package_notes
+ ;&
+ "lunar"|"mantic")
+ if [[ ! "$architecture" =~ amd64|arm64|armhf|ppc64el|s390x ]]
+ then
+ replace_uring_with_aio
+ fi
+ ;&
- if command -v eatmydata > /dev/null
++ "noble")
+ # mariadb-plugin-rocksdb s390x not supported by us (yet)
+ # ubuntu doesn't support mips64el yet, so keep this just
+ # in case something changes.
+ if [[ ! "$architecture" =~ amd64|arm64|ppc64el|s390x ]]
+ then
+ remove_rocksdb_tools
+ fi
+ ;;
+ *)
+ echo "Error: Unknown release '$LSBNAME'" >&2
+ exit 1
+esac
+
+# General CI optimizations to keep build output smaller
+if [[ $GITLAB_CI ]]
+then
+ # On Gitlab the output log must stay under 4MB so make the
+ # build less verbose
+ sed '/Add support for verbose builds/,/^$/d' -i debian/rules
+elif [[ -d storage/columnstore/columnstore/debian ]] && [[ "$LSBNAME" = !(buster|bionic) ]]
+then
+ # ColumnStore is explicitly disabled in the native Debian build. Enable it
+ # now when build is triggered by autobake-deb.sh (MariaDB.org) and when the
+ # build is not running on Gitlab-CI.
+ sed '/-DPLUGIN_COLUMNSTORE=NO/d' -i debian/rules
+ # Take the files and part of control from MCS directory
+ if [[ ! -f debian/mariadb-plugin-columnstore.install ]]
+ then
+ cp -v storage/columnstore/columnstore/debian/mariadb-plugin-columnstore.* debian/
+ echo >> debian/control
+ cat storage/columnstore/columnstore/debian/control >> debian/control
+ fi
+fi
+
+if [ -n "${AUTOBAKE_PREP_CONTROL_RULES_ONLY:-}" ]
+then
+ exit 0
+fi
+
+# Adjust changelog, add new version
+echo "Incrementing changelog and starting build scripts"
+
+# Find major.minor version
+UPSTREAM="${MYSQL_VERSION_MAJOR}.${MYSQL_VERSION_MINOR}.${MYSQL_VERSION_PATCH}${MYSQL_VERSION_EXTRA}"
+PATCHLEVEL="+maria"
+LOGSTRING="MariaDB build"
+EPOCH="1:"
+VERSION="${EPOCH}${UPSTREAM}${PATCHLEVEL}~${LSBID:0:3}${LSBVERSION}"
+
+dch -b -D "${LSBNAME}" -v "${VERSION}" "Automatic build with ${LOGSTRING}." --controlmaint
+
+echo "Creating package version ${VERSION} ... "
+
+BUILDPACKAGE_DPKGCMD=()
+
+# Fakeroot test
+if fakeroot true; then
+ BUILDPACKAGE_DPKGCMD+=( "fakeroot" "--" )
+fi
+
+# Use eatmydata is available to build faster with less I/O, skipping fsync()
+# during the entire build process (safe because a build can always be restarted)
- # If running autobake-debs.sh inside docker/podman host machine which
- # has 64 bits cpu but container image is 32 bit make sure that we set
- # correct arch with linux32 for 32 bit enviroment
- if [ "$architecture" = "i386" ] && [ "$uname_machine" = "x86_64" ]
- then
- BUILDPACKAGE_DPKGCMD+=("linux32")
- fi
-
++if which eatmydata > /dev/null
+then
+ BUILDPACKAGE_DPKGCMD+=("eatmydata")
+fi
+
+BUILDPACKAGE_DPKGCMD+=("dpkg-buildpackage")
+
+# Using dpkg-buildpackage args
+# -us Allow unsigned sources
+# -uc Allow unsigned changes
+# -I Tar ignore
+BUILDPACKAGE_DPKGCMD+=(-us -uc -I)
+
+# There can be also extra flags that are appended to args
+if [ -n "$BUILDPACKAGE_FLAGS" ]
+then
+ read -ra BUILDPACKAGE_TMP_ARGS <<< "$BUILDPACKAGE_FLAGS"
+ BUILDPACKAGE_DPKGCMD+=( "${BUILDPACKAGE_TMP_ARGS[@]}" )
+fi
+
+# Build the package
+# Pass -I so that .git and other unnecessary temporary and source control files
+# will be ignored by dpkg-source when creating the tar.gz source package.
+"${BUILDPACKAGE_DPKGCMD[@]}"
+
+# If the step above fails due to missing dependencies, you can manually run
+# sudo mk-build-deps debian/control -r -i
+
+# Don't log package contents on Gitlab-CI to save time and log size
+if [[ ! $GITLAB_CI ]]
+then
+ echo "List package contents ..."
+ cd ..
+ for package in *.deb
+ do
+ echo "$package" | cut -d '_' -f 1
+ # shellcheck disable=SC2034
+ dpkg-deb -c "$package" | while IFS=" " read -r col1 col2 col3 col4 col5 col6 col7 col8
+ do
+ echo "$col1 $col2 $col6 $col7 $col8" | sort -k 3
+ done
+ echo "------------------------------------------------"
+ done
+fi
+
+echo "Build complete"
--- /dev/null
- mariadb (1:11.8.0) unstable; urgency=medium
++mariadb (1:11.8.6-2) unstable; urgency=medium
+
- * Initial Release
++ [ Aquila Macedo ]
++ * Add systemd hardening patch for MariaDB units (Closes: #1123021)
+
- -- Sergei Golubchik <serg@mariadb.org> Tue Aug 20 08:40:21 CEST 2024
++ [ Otto Kekäläinen ]
++ * Add Lintian override for potentially false new error about embedded
++ libminizip
++ * Remove patch for x32 compilation now supposedly fixed upstream in ff4209f
++ * Update patch statuses and Forwarded fields to match latest
++ * Fix path to mariadb-server.README in mariadb-secure-install
++ (Closes: #1127863)
++ * Add preliminary upstream patch to fix MDEV-38811 that affected Akonadi and
++ any other use case that relies on 'skip-grant-tables' (Closes: #1127431)
++ * Add functional AppArmor profile for MariaDB 11.8 but keep it in 'complain'
++ mode for now to collect real usage experience, and enabling 'enforce' mode
++ some day in the future when likelihood of unanticipated AppArmor denials
++ is close to zero (Closes: #875890)
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 19 Feb 2026 08:08:08 +0000
++
++mariadb (1:11.8.6-1) unstable; urgency=medium
++
++ * Update d/watch to use uscan v5 format
++ * New upstream maintenance release 11.8.6. For details about fixes please see
++ https://mariadb.com/docs/release-notes/community-server/11.8/11.8.6
++ * Update server trace to include new 'new-mode' value 'FIX_INDEX_LOOKUP_COST'
++ * This release does not include any CVE addressing security fixes based on
++ https://mariadb.com/docs/server/security/securing-mariadb/security nor is
++ it known to fix any issues tracked in bugs.debian.org or launchpad.net
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 07 Feb 2026 08:08:08 +0000
++
++mariadb (1:11.8.5-4) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Add tentative upstream patch to fix amd64v3 build issues (MDEV-38398)
++ * Drop redundant `Priority: optional`
++ * Update Debian copyright for 2026
++ * Bump Debian Policy version
++
++ [ Aquila Macedo ]
++ * Drop obsolete library-not-linked-against-libc overrides
++ * Ship upstream sysusers.d mariadb.conf in mariadb-server (Closes: #1028271)
++ * Add patch sysusers-lock-mysql-account.patch
++ * Create mysql via sysusers in postinst, drop preinst adduser handling
++ * Drop adduser pre-depends, depend on systemd-sysusers provider
++ * Clarify NIS/YP debconf note for sysusers mysql account creation
++ * Update all translations to match updated template
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 13 Jan 2026 19:03:57 +0000
++
++mariadb (1:11.8.5-3) unstable; urgency=medium
++
++ * MDEV-23538: Rename mariadb.pc to mariadb-server-embedded.pc to avoid
++ confusion, as well as sync other misc Debian packaging improvements from
++ upstream
++ * Drop transitional dummy package `mariadb-server-10.5`
++ * Make mariadb-test-run logs more informative to make debugging failures
++ in Debian/Ubuntu build and autopkgtest logs easier
++ * Remove override for test 'main.mysql-interactive' and extensively document
++ and ensure all the mariadb-test-run skip lists are current
++ * Add tentative upstream patch to fix main.mysqld--help-aria test failure
++ * Add upstream patch to fix test innodb_log_file_size failures
++ * Add upstream patch to fix test innodb.log_corruption_recovery failures
++ * Add patch to fix Spider test failures in networkless environments
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 15 Dec 2025 20:00:00 -0800
++
++mariadb (1:11.8.5-2) unstable; urgency=medium
++
++ [ Aquila Macedo ]
++ * Relax perl client dependencies in mariadb-client (Closes: #1115678)
++
++ [ Otto Kekäläinen ]
++ * Make all MariaDB client plugins available in server plugin path
++ * Ensure dh_missing runs as intended in debian/rules
++ * Install upstream generated symlinks/binaries/manpages
++ * Fix misc typos and in Debian packaging
++ * Update Lintian overrides to clean away false positives and remove obsolete
++ Lintian overrides
++
++ [ MichaIng ]
++ * Make mariadb-common postinstallation script robust for situations where
++ the /etc/mysql/mariadb.cnf file for any reason was deleted on the system
++ so that the install/upgrade completes regardless
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 06 Dec 2025 10:38:02 -0800
++
++mariadb (1:11.8.5-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream maintenance release 11.8.5. For details about fixes please see
++ https://mariadb.com/docs/release-notes/community-server/11.8/11.8.5
++ * The version 11.8.4 was skipped in Debian (and Ubuntu) as it has a severe
++ regression causing partial data deletion when using the DELETE statement on
++ MyISAM or Aria tables under specific conditions (MDEV-38068)
++ * For details about fixes in 11.8.4 please see
++ https://mariadb.com/docs/release-notes/community-server/11.8/11.8.4
++ * This release does _not_ include any CVE tracked security fixes as per
++ https://mariadb.com/docs/server/security/securing-mariadb/security
++ * The MariaDB 11.8.4 did have a fix for mariadb-dump failing to run if a
++ for any table with a slash in the name. This has no actual exploit and
++ requires the attacker to already have access to the database so they can
++ create tables with arbitrary names. Trend Micro did however publish:
++ - CVE-2025-13699
++ * Update server trace to include new parameters and values
++ * Already existing plugins marked ready for general availability by upstream
++ in this release: uuid_v4, uuid_v7 and inet4
++ * Add Lintian override for false error in test plugin
++ * Patch new upstream test main.alter_merge to allow 'from Debian'
++ * Add libcrypt-dev to Build-Depends (Closes: #1106944)
++ * Extend unstable tests to skip for sparc64 and x32
++ * Remove Rules-Requires-Root
++ * Update patch Forwarded fields to reflect latest status
++ * Salsa CI: Disable running `gbp setup-gitattributes`
++ * Salsa CI: Fix typos introduced in 855bc4f6
++ * Salsa CI: Disable the new 'debrebuild' job for MariaDB due to timeouts
++
++ [ Daniel Black ]
++ * MDEV-37411: Re-enable AIO in Debian
++ * MDEV-15502: use tmpfiles with systemd (Closes: #1028272)
++ * MDEV-37776: shlibs:Depends shouldn't be explicit
++
++ [ Jean Weisbuch ]
++ * MDEV-37852: Fix mytop connection to localhost (Closes: #1109394)
++
++ [ Christian Hesse ]
++ * MDEV-35904/MDEV-19210: use environment file in systemd units for
++ _WSREP_START_POSITION (Closes: #1105029)
++
++ [ Aquila Macedo ]
++ * Add patch for new PCRE2 version 10.47 offset change (Closes: #1119866)
++ * Salsa CI: install build-essential for Python-MySQLdb job (Closes: #1121027)
++ * Salsa CI: keep provider plugins in sync in bookworm -> sid upgrade job
++
++ [ Sergei Golubchik ]
++ * MDEV-37600: Implement caching_sha2_password plugin for MySQL compatibility
++
++ [ Helge Kreutzmann ]
++ * Update German translation of debconf messages (Closes: #1120669)
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 29 Nov 2025 09:48:55 -0800
++
++mariadb (1:11.8.3-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream maintenance release 11.8.3. For details about fixes please see
++ https://mariadb.com/kb/en/mariadb-11-8-3-release-notes/
++ * Drop Hurd patches that are now included upstream
++ * Update configuration traces to include new upstream system variables:
++ - analyze-max-length (default: 4294967295)
++ - innodb-linux-aio (default: auto)
++ * Suppress new native AIO warning introduced in upstream a87bb96 to avoid
++ mariadb-test-run failing on on something that isn't a real issue
++ * New upstream release includes fix for MDEV-36815 that yielded "ERROR 1267
++ (HY000): Illegal mix of collations" on some systems when restarting the
++ MariaDB service in Debian (Closes: #1104533)
++ * Remove obsolete cleanup as upstream moved pam_mariadb_mtr.so in c05b1fe
++ * Salsa CI: Use full MariaDB package set in Bookworm MariaDB 10.6 upgrade
++ * Salsa CI: Automatically use archive.d.o for discontinued releases
++
++ [ Lena Voytek ]
++ * Do not hardcode libxml2 dependency in mariadb-plugin-connect
++ (Closes: #1106889)
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 08 Aug 2025 10:42:35 -0700
++
++mariadb (1:11.8.2-1) unstable; urgency=medium
++
++ * New upstream version 11.8.2, which also announces the 11.8 series now
++ ready for general availability (GA) with security releases for 5 years.
++ This release includes fixes for several defects as noted at
++ https://mariadb.com/kb/en/mariadb-11-8-2-release-notes/ as well
++ the following security issues (Closes: #1100437, #1105976):
++ - CVE-2023-52969
++ - CVE-2023-52970
++ - CVE-2023-52971
++ - CVE-2025-30693
++ - CVE-2025-30722
++ * Drop all RocksDB patches now upstream due to update to version 6.29fb
++ * Drop PCRE2 10.45 compatibility patch obsoleted by upstream test change
++ * Update configuration traces to include new upstream system variables:
++ - innodb-buffer-pool-size-auto-min (default: 0)
++ - innodb-buffer-pool-size-max (default: 0)
++ - innodb-log-checkpoint-now (default: FALSE)
++ * Also update configuration traces to match that in 11.8.2 the variables
++ innodb-buffer-pool-chunk-size and innodb-log-spin-wait-delay are advertised
++ as deprecated.
++ * Disable new unreliable test main.mysql-interactive
++ * Add Breaks/Replaces for files moved around in src:mysql-8.4 (LP: #2110378)
++ * Update mariadb-server.NEWS with information about MariaDB 11.8 and
++ * best practices for creating app user and allowing remote connections
++ * Add patch to improve output from mariadb-secure-installation
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 08 Jun 2025 11:19:07 +0300
++
++mariadb (1:11.8.1-5) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Disable additional tests that failed on sparc64 (MDEV-36670)
++ * Have all server plugins depend on mariadb-server-core (Closes: #1039702)
++ * Make plugin dependencies on mariadbd on strictly versioned
++ (Closes: #1057708)
++ * Remove redundant BSD license comment in debian/copyright
++ * Remove unnecessary arch from dh_installinit rule
++ * Make COMPILATION_COMMENT and MYSQL_SERVER_SUFFIX more useful
++ * Several improvements to Salsa CI, Lintian overrides and other quality
++ assurance for Debian 13 "Trixie"
++
++ [ Jing Luo ]
++ * d/upstream/metadata: change github url protocol from git to https
++ * d/copyright: remove old FSF address
++ * d/copyright: move "On Debian systems..." to comment stanza
++ * d/copyright: misc fixes, remove the full text of BSD-3 and Artistic
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 26 May 2025 09:23:46 -0700
++
++mariadb (1:11.8.1-4) unstable; urgency=medium
++
++ * Disable main.mysqld--help-aria test that failed on nearly every
++ architecture in previous upload due to new upstream issue (MDEV-36334)
++ * Disable some vector related tests that failed on sparc64 (MDEV-36670)
++ * Backport main.func_format fix for exabyte/petabyte mismatch on i386
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 23 Apr 2025 07:29:38 -0700
++
++mariadb (1:11.8.1-3) unstable; urgency=medium
++
++ * Add patch to have CEST as allowed in main.timezone test (Closes: #1084293)
++ * Backport revert of CONC-710 that broke building UDFs (Closes: #1101397)
++ * Backport systemd service fix for restarts on crashes (Closes: #1073847)
++ * Update standards version to 4.7.2, no changes needed
++ * Re-enable tests that were passing recently in experimental when MariaDB
++ Debian revision 1:11.4.5-2~exp1 built or which otherwise was confirmed to
++ passing now: mariabackup.encrypted_page_corruption, mariadb_upgrade,
++ MDEV-22243, MDEV-23427, MDEV-23921, MDEV-27955, MDEV-30518, MDEV-30676,
++ MDEV-30728, MDEV-30918, MDEV-30929, MDEV-31349, MDEV-33520, MDEV-33520,
++ MDEV-34084, MDEV-34733, MDEV-34781, MDEV-34788, MDEV-36334
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 19 Apr 2025 12:06:11 -0700
++
++mariadb (1:11.8.1-2) unstable; urgency=medium
++
++ * Disable test func_format on i386 (MDEV-36334) to get i386 builds
++ pass on official Debian buildd while upstream fixes the issue
++ * Restore better error message on service stop failures from c789cdaf
++ * Revert "Set CAP_IPC_LOCK capability if possible" to follow upstream
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 20 Mar 2025 12:31:04 -0700
++
++mariadb (1:11.8.1-1) unstable; urgency=medium
++
++ * New major upstream release candidate MariaDB 11.8, which is going to be the
++ next Long-Term Supported (LTS) version. For an overview of what is new in
++ the upstream release, see
++ https://mariadb.com/kb/en/changes-improvements-in-mariadb-11-8/.
++ * Update d/watch for MariaDB 11.8 series
++ * Update references to 11.4 with 11.8
++ * Drop 'utf8mb4' config as 'utf8mb4' and 'uca1400_ai_ci' is now default
++ * Include new authentication plugin PARSEC
++ * Temporarily disable the new SBOM generation incompatible with Debian
++ * Ensure mariadb-server-core can overwrite mariadb-server-compat
++ * Update configuration traces for 11.8(.1)
++ * Drop unused dh-exec from libmariadb-dev-compat.links
++ * Disable main.view test on sparc64 as it seems permanently failing now
++ * Complete and unfuzz all incomplete translations
++ * Add Hindi and Korean translations for MariaDB debconf templates
++ * Update Lintian overrides/mismatches
++ * Manually strip debug symbols from libmariadbd.a
++ * Fix incorrect SIGTERM/SIGKILL use in 98c3c0730
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 13 Mar 2025 13:58:11 -0700
++
++mariadb (1:11.4.5-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 11.4.5. Includes fixes for several defects
++ as noted at https://mariadb.com/kb/en/mariadb-11-4-5-release-notes/ as well
++ the following security issues:
++ - CVE-2025-21490
++ * Include new packaging changes done upstream:
++ - MDEV-35907: debian-start script fails when using non-standard socket path
++ - MCOL-5819: Disable LTO for ColumnStore, otherwise enabled by default
++ - MDEV-32686: Include ELF package notes
++ * Update configuration traces to match changes done in MDEV-35785
++ * Update configuration traces with new query allocator values from MDEV-35750
++ * Build MariaDB RocksDB on loong64 now too
++ * Fix minor typos in Debian packaging files
++ * Fix broken links in d/copyright
++ * Unify spelling fix patches into one, and fix spelling of Enrypt->Encrypt
++
++ [ Matthew Vernon ]
++ * Add patch to fix `main.func_regexp_pcre` failing with latest PCRE2 10.45
++ due to backwards-incompatible case-sensitivity change in behavior in latest
++ PCRE2 version (Closes: #1095286)
++
++ [ Joe Bliss ]
++ * Revert backticks change in commit 0300a915 to be compatible with databases
++ containing hyphenated table names (LP: #2085554)
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 19 Feb 2025 08:57:57 -0800
++
++mariadb (1:11.4.4-3) unstable; urgency=medium
++
++ * Set CAP_IPC_LOCK capability if possible
++ * Stop depending on obsolete libpmem-dev, re-implemented in MariaDB
++ * Clean away duplicate wsrep-provider from configuration traces
++ * Add upstream patch to ensure innodb_log_file_mmap is always visible
++ * Add patch to use the same innodb_log_file_mmap description on all systems
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 12 Jan 2025 14:10:40 -0800
++
++mariadb (1:11.4.4-2) unstable; urgency=medium
++
++ * Disable main.mysqld--help-aria on all architectures as if seems
++ they are all now affected by https://jira.mariadb.org/browse/MDEV-34733
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 21 Dec 2024 22:22:48 -0800
++
++mariadb (1:11.4.4-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 11.4.4. Includes fixes for several severe regressions
++ as noted at https://mariadb.com/kb/en/mariadb-11-4-4-release-notes/. This
++ release is not known to include any CVE assigned security fixes.
++ * MariaDB 11.4.4 includes fix to crashes related to SST from older MariaDB
++ versions (Closes: #1089142)
++ * Update server trace to include new parameters and values. This includes now
++ MariaDB client parameter 'quick-max-column-width' and new MariaDB Server
++ parameters 'innodb-log-file-mmap' and 'optimizer-join-limit-pref-ratio'.
++ Also the parameters 'innodb-lru-flush-size' and
++ 'innodb-purge-rseg-truncate-frequency' seems to have been removed.
++ * Update MTR skiplists based on buildd results after 1:11.4.3-1 upload, but
++ re-enable main.having_cond_pushdown fixed in latest release (MDEV-34650)
++ * Rename README.Contributor to README.source.md
++ * Update debian/patches to be compatible with `gbp pq` to avoid `quilt`.
++ * Update Lintian overrides for libmariadb-dev regarding man page syntax.
++ * Add patch to fix Lintian nag about spelling of 'allows one to' and drop one
++ patch about spelling fixes that got applied upstream.
++ * Apply `debputy reformat --style black`.
++ * Allow use of patched libfmt-dev 10.1.1 with thousands separator fixed
++ (Related: #1086722, Closes: #1088198).
++ * Add patch to revert mysqlbinlog related regression MDEV-35528
++ * To follow gbp pq practices, place DEP-3 headers at the end of patches
++ * Thanks to Jing Luo for review!
++
++ [ Phil Dibowitz ]
++ * Add some info on getting back to passwordless root (Closes: #1088133)
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 12 Dec 2024 21:56:05 -0800
++
++mariadb (1:11.4.3-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 11.4.3. Includes fixes for several severe regressions
++ as noted at https://mariadb.com/kb/en/mariadb-11-4-3-release-notes/. This
++ release is not known to include any CVE assigned security fixes.
++ * Add Lintian override for metadata_lock_info.so not linked against libc
++ * Update Lintian overrides and MTR skiplists after 11.4.3 import
++ * Update server trace to include new parameters and values
++ * Refactor import * with only required imports
++ * Import upstream debian/ changes from MDEV-33750
++ * Pre-depend on 'procps' in mariadb-server
++ * Use /usr/lib/lsb/init-functions instead of old /lib location
++ * Rewrite the NEWS item to match latest status in MariaDB 11.4.3
++ * Extend gbp.conf and update maintainer READMEs to make git-buildpackage
++ and in general building and maintaining this package easier and more
++ approachable by new contributors
++
++ [ Bastien Roucariès ]
++ * Add NEWS file
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 18 Aug 2024 21:59:29 -0700
++
++mariadb (1:11.4.2-4) unstable; urgency=medium
++
++ * Revert move of 'mysqld_safe' to compat package to avoid breaking pdns
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 12 Jul 2024 20:52:32 -0700
++
++mariadb (1:11.4.2-3) unstable; urgency=medium
++
++ * Make compile_time_assert compatible with x32 (Closes: #1063738)
++ * Revert "Stop building the embedded server to save disk space"
++ (Closes: #1074670)
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 07 Jul 2024 21:59:40 -0700
++
++mariadb (1:11.4.2-2) unstable; urgency=medium
++
++ * Disable the 'mysql*' command deprecation warning
++ * Revert move of 'mysqldump' to compat package to avoid breaking dependencies
++ * Revert move of 'mysqladmin' to compat package to avoid breaking dependencies
++ * Use correct 1:11.0.0 version in Breaks/Replaces (Closes: #1074566)
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 01 Jul 2024 15:41:57 -0700
++
++mariadb (1:11.4.2-1) unstable; urgency=medium
++
++ * New upstream major version 11.4.2. Includes new features as noted at
++ https://mariadb.com/kb/en/mariadb-11-4-2-release-notes/ for this
++ minor release that got announced for General Availabily and
++ https://mariadb.com/kb/en/changes-improvements-in-mariadb-11-4/
++ for an overview of what the MariaDB 11.4 series brings.
++ * Use new '/usr/share/mariadb' path instead of deprecated 'mysql' equivalent
++ * Use new 'mariadb-test' path and name instead of deprecated 'mysql-test'
++ * Use command 'mariadb' instead of deprecated 'mysql'
++ * Don't stop autopkgtest configuration-tracing on errors early
++ * Update server trace to include new parameters and values
++ * Add build/test dependency libnet-ssleay-perl
++ * Partially sync debian/ with upstream MariaDB 11.4.2
++ * Fix all Lintian errors, and more, for MariaDB 11.4.2
++ * Make transitional mariadb-server-10.5 package compatible with 11.4
++ * Stop building the embedded server to save disk space
++ * When shutting down 'mariadbd', fallback to 'mysqld'
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 23 Jun 2024 21:46:13 -0700
++
++mariadb (1:10.11.8-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.11.8. Includes fixes for several severe regressions
++ as noted at https://mariadb.com/kb/en/mariadb-10-11-8-release-notes/ as well
++ as security issues:
++ - CVE-2024-21096
++ * Add CMake flag to ignore libfmt exit code so cross-building works
++ * Extend skip test list for latest failures in reproducible builds on armhf
++ * Disable tests that fail on armhf when full test suite is run
++ * Remove temporary exceptions for bugs that should by now be fixed
++ * MDEV-31530 Localizations for Swahili language
++ * Update Innotop to be compatible with MariaDB 11.x series
++ * Replace use of trailing line `| \` with just `|` in Bash scripts
++ * Remove libmariadb file no longer present in MariaDB Connector C v3.3
++ * Replace autopkgtest smoke test dependency hack with arch list
++ * Update client program 'mariadb' trace to match new libmariadb v3.3
++ - New parameter 'sandbox' to fix a vulnerability and new mariadb-dump
++ output that always has the sandbox header and is backwards incompatible
++ * Update server trace to include new parameters innodb-log-spin-wait-delay
++ and innodb-snapshot-isolation
++ [ Michael Biebl ]
++ * Ensure debconf database is purged after it has been used in postrm
++
++ [ Svante Signell ]
++ * Make hurd-i386 build fully pass (Closes: #1069094)
++
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 16 May 2024 22:02:04 -0700
++
++mariadb (1:10.11.7-4) unstable; urgency=medium
++
++ [ Michael Biebl ]
++ * Drop unnecessary mariadb-server.prerm (Closes: #1067491)
++ * Rely on dh_installsystemd to stop the service in postrm
++
++ [ Otto Kekäläinen ]
++ * Remove direct dependencies on libcurl4 (Closes: #1068403, #1068404)
++ * Make tests compatible with OpenSSL 3.2.0
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 13 Apr 2024 11:07:08 -0700
++
++mariadb (1:10.11.7-3) unstable; urgency=medium
++
++ * Add 'dpkg-dev (>= 1.22.5)' to Build-Depends for time_t transition
++ (Closes: #1065275)
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 02 Mar 2024 08:26:26 -0800
++
++mariadb (1:10.11.7-2) unstable; urgency=medium
++
++ [ Graham Inggs ]
++ * Rename libraries for 64-bit time_t transition (Closes: #1062841)
++
++ [ Otto Kekäläinen ]
++ * Salsa-CI: Adopt new libmariadbd19t64 library name in CI
++ * Remove obsolete Lintian override:
++ package-supports-alternative-init-but-no-init.d-script
++ * Disable more tests not passing for sparc64 on Debian
++ * Add patch to fix hurd-i386 build failure (Closes: #1063739)
++ * Add patch to partially revert upstream c432c9ef (Closes: #1063738)
++ * Disable table_value_constr failing on armhf on Launchpad
++ * Backport patch for MDEV-32975 (collation fix for PHP connector)
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 01 Mar 2024 17:43:11 -0800
++
++mariadb (1:10.11.7-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.11.7. Includes fixes for several regressions
++ as noted at https://mariadb.com/kb/en/mariadb-10-11-7-release-notes/
++ * Add missing ${misc:Depends} to Depends for mariadb-server-10.5
++ * Re-export upstream signing key without extra signatures
++ * Remove field Priority on binary package mariadb-server-10.5 that duplicates
++ source
++ * Update debian/copyright for 2024
++ * Delete test plugin pam_mariadb_mtr.so to keep mariadb-test-data clean
++ * Clean away unused Lintian overrides
++ * Remove unneeded CMAKE_SYSTEM_PROCESSOR from debian/rules
++ * Add patch to skip building AUTH_SOCKET on Hurd (Related: #1006531)
++ * Use Pre-Depends to ensure init-system-helpers is present
++
++ [ Michael Biebl ]
++ * Install PAM module and systemd files into /usr (Closes: #1061348)
++ * Install .service files via .install and let dh_installinit/dh_systemd
++ generate the maintscript code
++ * Switch to dh_installsystemd and debhelper compat 13
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 06 Feb 2024 20:14:49 -0800
++
++mariadb (1:10.11.6-2) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Make the transitional dummy package description explicit
++ * Ensure 'clean' target works
++ * Use upstream patch to fix subselect test regressions (Closes: #1059904)
++ * Disable innodb_ext_key crashing on ppc64el (Related: #1059904)
++ * Apply upstream patch to use RDTIME in RISC-V (Closes: #1060007)
++ -- Otto Kekäläinen <otto@debian.org> Fri, 05 Jan 2024 16:32:12 +0800
++
++mariadb (1:10.11.6-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.11.6. Includes fixes for several severe regressions
++ as noted at https://mariadb.com/kb/en/mariadb-10-11-6-release-notes/ as well
++ as security issues:
++ - CVE-2023-22084
++ * Upstream MariaDB Server 10.11.6 included fix for fmtlib 10 compatibility
++ (Closes: #1056387)
++ * Drop STACK_DIRECTION customization as upstream CMake code now handles it
++ * Update traces to match these changes in MariaDB 10.11.6:
++ - New option 'ALL' to multiple parameters as a way to define that all
++ possible values/options are selected
++ - New variables log-slow-max-warnings, note-verbosity and
++ optimizer-max-sel-args
++ - Default value for innodb-purge-batch-size increased to 1000
++ - Support for TLSv1.1 has been dropped
++
++ [ Guillem Jover ]
++ * Remove tilegx support removed from dpkg 1.22.0 (Closes: #1056748)
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 26 Nov 2023 18:54:33 -0800
++
++mariadb (1:10.11.5-3) unstable; urgency=medium
++
++ * Bugfix: Rewrite 0300a91 again to retain original autopkgtest behavior
++ * Disable more tests not passing on Debian post-build test or Launchpad
++ * Fix misc spelling
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 13 Oct 2023 21:48:03 -0700
++
++mariadb (1:10.11.5-2) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Make SysV init more verbose in case of MariaDB start failures
++ * Test & QA related changes:
++ * Bugfix: Rewrite 0300a9157cc to retain original autopkgtest behavior
++ * Switch autopkgtest upstream job to use '--skip-rpl --suite=main' again
++ * Include type_test.so and others in mariadb-test package
++ * Revert "Skip upstream MTR run on armel/armhf where lxcfs upgrade broke CPU check"
++ * Partially revert fc1358087b3 about MDEV-30728 to see if it still occurs
++ * Remove overrides for test failures that should be fixed now
++ * Add patch to fix disk.disk{_notembedded} tests and re-enable them
++ * Disable tests not passing on Debian CI, Salsa CI or Launchpad builds
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 07 Oct 2023 16:00:43 -0700
++
++mariadb (1:10.11.5-1) unstable; urgency=medium
++
++ [ Helmut Grohne ]
++ * Fix FTCBFS: Do not pass host CFLAGS to the native build. (Closes: #1051222)
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.11.5. Includes fixes for several severe regressions
++ as noted at https://mariadb.com/kb/en/mariadb-10-11-5-release-notes/ such as
++ - MDEV-31642: Upgrade may crash if innodb_log_file_buffering=OFF
++ (Closes: #1040784)
++ * Update configuration tracing to match what is expected for 10.11.5
++ * Include trailing slash in watch file to be compatible with latest uscan
++ * Re-apply "Limit check of running mysqld/mariadbd to system users (Closes: #1032047)"
++ * Re-apply "Add patches to fix spelling in MariaDB and components (Closes: #1032860)"
++ * Sync downstream (where applicable) with upstream 10.11 debian/* contents
++ * Complement upstream commits with more complete mysql->mariadb conversion
++ * Misc fixes to Debian scripts to satisfy Shellcheck
++ * Fix blocksize check to use $mysql_datadir/$datadir correctly
++ * Make sure that datadir always has some value and exists
++
++ [ Tuukka Pasanen ]
++ * MDEV-30951: Fix small perlcritic and enable modern Perl
++ * Remove usage of AWK from Debian init and postinst scripts
++
++ [ Anel Husakovic ]
++ * MDEV-31358: Update description for MariaDB deb packages
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 03 Oct 2023 20:59:30 -0700
++
++mariadb (1:10.11.4-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.11.4. Includes fixes for several severe regressions,
++ see details at https://mariadb.com/kb/en/mariadb-10-11-4-release-notes/
++
++ [ Andreas Beckmann ]
++ * Introduce transitional mariadb-server-10.5 (Closes: #1035949)
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 04 Jun 2023 11:22:27 -0700
++
++mariadb (1:10.11.3-1) unstable; urgency=medium
++
++ * New upstream version 10.11.3. Includes security fixes for
++ - CVE-2022-47015 (Closes: #1034889)
++ * This is the first bug fixing maintenance release from upstream in the 10.11
++ series as the 10.11.2 release was the first one announced GA (general
++ availability). For a full list of all bug fixes see release notes at
++ https://mariadb.com/kb/en/mariadb-10-11-3-release-notes/.
++ * Update libmariadb3.symbols to include new ABI changes in 3.3.5
++ and fix DPKG_GENSYMBOLS_CHECK_LEVEL so it actually takes effect and in
++ build will properly fail if there are unaccounted symbol changes in
++ future upstream maintenance releases
++ * Update Lintian overrides after 10.11.3 import
++ * Use new log_slow_* configuration variable names in configuration examples
++ to be aligned with upstream and have least amount of surprises for users
++ of MariaDB 10.11 where these variables changed names
++ * Clean away unnecessary mariadb-test.links, no functional effect
++ * Delete all embedded zlib copies to fix crossbuilds and improve security
++ * Use native zlib to make crossbuilds work again after recent zlib 1.2.13
++ update regressed crossbuilds
++ * Revert fixes from February/March 2023 that the Debian release team
++ deemed unfit/too late for Bookworm (Bug#1033811):
++ - Revert "Add patch to fix upgrades from MySQL 5.7 to MariaDB 10.11..."
++ - Revert "Limit check of running mysqld/mariadbd to system users..."
++ - Revert "MDEV-21303: Fix man page packaging for new mariadb-* named..."
++ - Revert "Add patches to fix spelling in MariaDB and components..."
++ - Revert "Add patch to better diagnose failures in main.order_by_innodb..."
++ - Revert "Add patch to fix misc compiler warnings in upstream build"
++ - Revert "Add patch to emit warnings if mariadb-upgrade was not run..."
++
++ [ Mathias Gibbens ]
++ * Silence superfluous warnings in mariadb-server preinst (Closes: #1034684)
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 27 May 2023 23:16:42 -0700
++
++mariadb (1:10.11.2-3) unstable; urgency=medium
++
++ * Fix typo in autopkgtests configuration-tracing affecting armhf and armel
++ * Revert: Sync downstream (where applicable) with upstream 10.11 debian/*
++ contents so that using diff/meld to compare changes are easier
++ - Revert on suggestion by Debian release managers the changes done by
++ upstreams devs in https://github.com/MariaDB/server/commit/952af4a1
++ for MariaDB 10.5.19, 10.6.12, 10.11.2 etc. It was deemed too invasive
++ for the Debian 12 "Bookworm" release this late in the release cycle.
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 20 Apr 2023 21:48:51 -0700
++
++mariadb (1:10.11.2-2) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * SUMMARY: This version has a lot of bug fixes, quality fixes, documentation
++ and translation updates and it is tailored for the Debian 12 "Bookworm"
++ release and all potentially functional changes have been left out and
++ are pending review and merge post-Bookworm release at
++ https://salsa.debian.org/mariadb-team/mariadb-server/-/merge_requests,
++ where contributions both as reviews and new submissions are welcome!
++ * Update NEWS to summarize what is new in MariaDB 10.11 (compared to 10.6)
++ * Update and activate configuration tracing in autopkgtests to ensure that
++ for the Debian 12 "Bookworm" release cycle no upstream server config change
++ would slip in unnoticed
++ * Enable mariadb-plugin-rocksdb for riscv64 (fixes autopkgtests for riscv64)
++ * Sync downstream (where applicable) with upstream 10.11 debian/* contents
++ so that using diff/meld to compare changes are easier
++ * Add important upstream 10.11.2+ fixes as packes:
++ * Stack overflow in pinbox allocator (PR#2541)
++ * Upgrades from MySQL 5.7 to MariaDB 10.11 (MDEV-30483) (Closes: #866751)
++ * Misc compiler warnings in upstream build
++ * Incomplete stack traces if MariaDB crashes
++ * Make mariadbd emit warnings if mariadb-upgrade was not run
++ * Binlog failures due to 'character_set_client' (MDEV-30824)
++ * Prevent mariadb-test-run from using native I/O on ppc64el and s390x due to
++ Linux kernel bug (Related: #1031656)
++ * Add patch to better diagnose potential failures in main.order_by_innodb
++ * Add patch to fix cross-compilation failure on uca-dump (Closes: #1029165)
++ * Update mariadb-test-run skip test lists to not run tests that are known
++ to be broken or unstable, and that have been reported upstream
++ * Limit check of running mysqld/mariadbd to system users (Closes: #1032047)
++ * Make error more helpful in case server restart fails (Related: #1033234)
++ * Update Lintian overrides after rigorous review of all Lintian issues
++ * Remove incorrect Multi-Arch definitions
++ * Fix man pages syntax issues (Closes: #1032861)
++ * Fix spelling in MariaDB and components (Closes: #1032860)
++ * Refresh patches metadata
++ * Update upstream signing key
++ * Fix dependency of obsolete libncurses5-dev
++
++ [ Ekaterine Papava ]
++ * Add Georgian translation (error messages)
++
++ [ Tuukka Pasanen ]
++ * Update README files to correct versions
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 25 Mar 2023 23:26:42 -0700
++
++mariadb (1:10.11.2-1) unstable; urgency=medium
++
++ * New upstream release MariaDB 10.11.2 has been announced GA
++ (general availability) with long-term support and security updates
++ until spring 2028
++ * Autopkgetest improvements
++ - Fix incomplete variable rename in a3b6f3d7f4b
++ - Extend tracing to include MariaDB client and move traces to subdirectory
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 16 Feb 2023 23:53:02 -0800
++
++mariadb (1:10.11.1-5) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Packages mariadb-plugin-provider-* must depend at least on MariaDB 10.11
++ * Make postinstall check work with more than one result (Closes: #1031244)
++ * Revert "Compression plugins as Depends for mariadb-server" (Closes: #1031116)
++ to not break the Cacti autopkgtests and allow the mariadb-10.6 autopkgtest
++ to fail instead (re-introducing Bug#1031116)
++
++ [ Bubu ]
++ * Update French translation of debconf messages (Closes: #1030581)
++
++ [ Adriano Rafael Gomes ]
++ * Update Brazilian translation of debconf messages (Closes: #1030908)
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 15 Feb 2023 22:57:46 -0800
++
++mariadb (1:10.11.1-4) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Have all compression plugins as Depends for mariadb-server (Closes: #1030604)
++ * Update existing patch with latest upstream PR#2448 version 0284207
++ * Temporarily disable MTR on s390x as Debian buildd seems unstable
++ (Related: #1030510)
++ * Add upstream patch to fix build failure on HPPA (Closes: #1006529)
++ * Refresh patches and include references to Debian bugs they should fix
++
++ [ Gianfranco Costamagna ]
++ * Drop riscv64 rules latomic hack, use upstream PR#2477 instead
++ (Related: #1024041)
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 09 Feb 2023 08:40:34 -0800
++
++mariadb (1:10.11.1-3) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Customize dh_installinit to keep service enabled (Closes: #1029136)
++ * Fix alpha compilation error in GPREL16/wsrep_* (Closes: #1024040)
++ * Skip tests that have bug reports and known to fail on 1:10.11.1-2
++ * Review and polish autopkgtests
++
++ [ Tianyu Chen ]
++ * Add simplified Chinese translation of debconf messages
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 05 Feb 2023 15:21:04 -0800
++
++mariadb (1:10.11.1-2) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Add upstream patch for main.explain_json_format_partitions (MDEV-30411)
++ (Closes: 1029163)
++ * Fix riscv64 compilation error in RocksDB atomic functions (Closes: #1024041)
++ * Stop skipping tests that are marked fixed upstream
++ * Don't ship any mysql-tests/unstable-tests as neither does upstream
++ * Skip test main.func_json_notembedded on s390x due to MDEV-30518
++ * Implement configuration tracing as an autopkgtest test
++ * Drop obsolete dependency on package lsb-release
++ * Clean away outdated mentions of mariadb-10.6 and even mysql-dfsg-5.1
++ * Update more Lintian overrides syntax to follow latest Lintian 2.115
++ * Update standards version to 4.6.2, no changes needed
++ * Update watch file format version to 4
++
++ [ MichaIng ]
++ * Do not create /var/log/mysql in postinst
++
++ [ Salman Mohammadi ]
++ * mariadb-plugin-connect: introduce curl as recommends
++
++ [ Remus-Gabriel Chelu ]
++ * Update Romanian translation of debconf messages
++
++ [ Faustin Lammler ]
++ * Cover the full-upgrade scenario in CI
++
++ [ Pablo ]
++ * Update Galician translation of debconf messages
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 31 Jan 2023 00:19:17 -0800
++
++mariadb (1:10.11.1-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New major upstream release: 10.11
++ - Introduce new packages called 'providers', each one providing
++ a particular features, though so far only various compression
++ methods.
++ - New plugin package for Hashicorp Vault
++ - Upstream 10.11 series is intended to be a long-term supported
++ version with 5 years of security releases
++ - The other major versions 10.7/8/9/10 releases after 10.6
++ are all short-term releases, and thus not suitable for inclusion
++ in Debian but still worth noting as a guide on how to read
++ upstream relases notes, as all apply for what is now new in
++ Debian with the introduction of this 10.11
++ * Remove version suffix from Debian packages and rename source
++ package to just 'mariadb', dropping the 10.6 suffix.
++ * Emit warning from SysV init script if mysqld_safe is missing
++ * Ignore some EXPLAIN JSON test failures on armel/armhf (MDEV-30411)
++ * Add custom dh_installinit to keep /etc/init.d/mariadb enabled
++ when upgrading from mariadb-server-10.6 to mariadb-server (10.11)
++
++ [ Sunil Mohan Adapa ]
++ * Workaround failure to create DB with libpam-tmpdir (Closes: #1022994)
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 15 Jan 2023 14:45:21 -0800
++
++mariadb-10.6 (1:10.6.11-2) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Standardize on using capitalized 'ON' in CMake build options
++ * Fix Breaks/Replaces for smoother upgrades from MySQL 5.5
++ and update maintainer documentation on how to do comprehensive
++ upgrade testing
++ * Enable automatic datadir move also on upgrades from MySQL.com packages
++ and make upgrades from MySQL Community (Cluster) 8.0 not get
++ stuck on dpkg and server restart
++
++ [ Eric Lindblad ]
++ * Fix typos
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 02 Jan 2023 22:42:46 -0800
++
++mariadb-10.6 (1:10.6.11-1) unstable; urgency=medium
++
++ * New upstream version 10.6.11.
++ * Align with upstream 10.6 debian/ contents
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 13 Nov 2022 22:27:08 -0800
++
++mariadb-10.6 (1:10.6.10-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.6.10. Includes several important fixes for
++ issues that regressed in previous release. See details in:
++ https://mariadb.org/regressions-in-recent-mariadb-server-releases/
++ * Update Lintian overrides syntax to follow latest Lintian 2.115
++ - Biggest change in Lintian 2.115 is a new syntax to use brackets in file
++ paths.
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 25 Sep 2022 15:43:39 -0700
++
++mariadb-10.6 (1:10.6.9-1) unstable; urgency=medium
++
++ * New upstream version 10.6.8. Includes security fixes for
++ - CVE-2018-25032
++ - CVE-2022-32081
++ - CVE-2022-32082
++ - CVE-2022-32084
++ - CVE-2022-32089
++ - CVE-2022-32091
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 17 Aug 2022 07:28:05 -0700
++
++mariadb-10.6 (1:10.6.8-1) unstable; urgency=medium
++
++ * New upstream version 10.6.8. Includes security fixes for
++ - CVE-2021-46669
++ - CVE-2022-27376
++ - CVE-2022-27377
++ - CVE-2022-27378
++ - CVE-2022-27379
++ - CVE-2022-27380
++ - CVE-2022-27381
++ - CVE-2022-27382
++ - CVE-2022-27383
++ - CVE-2022-27384
++ - CVE-2022-27386
++ - CVE-2022-27387
++ - CVE-2022-27444
++ - CVE-2022-27445
++ - CVE-2022-27446
++ - CVE-2022-27447
++ - CVE-2022-27448
++ - CVE-2022-27449
++ - CVE-2022-27451
++ - CVE-2022-27452
++ - CVE-2022-27455
++ - CVE-2022-27456
++ - CVE-2022-27457
++ - CVE-2022-27458
++ - CVE-2022-32085
++ - CVE-2022-32086
++ - CVE-2022-32087
++ - CVE-2022-32088
++
++ [ Daniel Black ]
++ * Move client programs to client package from MariaDB server package
++
++ [ Tuukka Pasanen ]
++ * MDEV-12275: Add switch '--silent' to SySV init upgrade
++ * Allow to use Perl DBD::mysl with mariadb-report (MDEV-28376)
++
++ [ Andreas Hasenack ]
++ * Disable LTO on Ubuntu
++
++ [ Faustin Lammler ]
++ * Use archive.mariadb.org as official watch source
++
++ [ Laurent Bigonville ]
++ * Fix pmem availability check (Closes: #1006530)
++
++ [ Otto Kekäläinen ]
++ * Update breaks/replaces to accommodate the moved mariadb-binlog et al
++ * Use pmem also on riscv64
++ * Add Bulgarian and Chinese translations for error messages
++ * Use proper pid namespace
++ * Add upstream PR#2129 to fix wsrep_sst_backup packaging
++ * Deb: Move my_print_defaults to MariaDB client core package
++ * Deb: Ensure the not-installed list is up-to-date
++ * Install all available man pages in appropriate packages
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 22 May 2022 16:44:02 -0700
++
++mariadb-10.6 (1:10.6.7-3) unstable; urgency=medium
++
++ * Fix syntax error in unstable tests lists
++ * Forward patches upstream and update metadata for them
++ * Bugfix: Include missing sql_parse.cc in ER_KILL_DENIED_ERROR patch
++ * Fix mysql_install_db by reverting recent addition (MDEV-27980)
++ * Fix htm use on PowerPC to fix build failure (might close #1006527)
++ * Revert "Strip path from Mroonga to make the build reproducible"
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 09 Mar 2022 22:26:32 -0800
++
++mariadb-10.6 (1:10.6.7-2) unstable; urgency=medium
++
++ * Backport OpenSSL 3.0 support for MariaDB 10.6 series (Closes: #1005950)
++ * Clean away most Lintian overrides and unstable-tests to see full
++ QA results in Debian experimental
++ * Add upstream PR#2028 to fix main.grant_kill test failure
++ * Update unstable-tests skip lists after review of 1:10.6.7-2~exp1 builds
++ * Fix more spelling errors
++ * Fix misc Lintian issues and add overrides
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 01 Mar 2022 20:40:07 -0800
++
++mariadb-10.6 (1:10.6.7-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.6.7. Includes security fixes for
++ - CVE-2021-46661
++ - CVE-2021-46663
++ - CVE-2021-46664
++ - CVE-2021-46665
++ - CVE-2021-46668
++ * New upstream version 10.6.6. Includes security fixes for
++ - CVE-2021-46659
++ - CVE-2022-24048
++ - CVE-2022-24050
++ - CVE-2022-24051
++ - CVE-2022-24052
++ * Previous release 10.6.5 included security fixes for:
++ - CVE-2021-46662
++ - CVE-2021-46667
++ * Notable upstream functional changes in 10.6.6 and 10.6.7:
++ - New default value for innodb_change_buffering is 'none' instead of old
++ value 'all' (MDEV-27734). This change should improve crash safety but
++ might cause performance regressions on systems that use old spinning disks
++ (HDD) where seek latency is higher.
++ - New default value for innodb_read_only_compressed is 'OFF' instead of
++ 'ON'. Upstream originally intended to deprecate ROW_FORMAT=COMPRESSED but
++ abandoned the plan.
++ - New default minimum value for innodb_buffer_pool_size is 20 MB (from 2 MB)
++ * Drop MIPS and CTE patches applied now upstream
++ * Add upstream patch to make Mroonga builds reproducible (Closes: #976984)
++ * Add patch for potential kfreebsd-amd64 build failure (Closes: #994665)
++ * Remove useless libaio-dev dependency from d/control (Closes: #1001649)
++
++ [ Faustin Lammler ]
++ * Salsa-CI: use a mirror redirector for the CI
++
++ [ Bas Couwenberg ]
++ * Don't require debian.cnf to be executable in logrotate (Closes: #1005186)
++
++ [ Tuukka Pasanen ]
++ * Remove unneeded path from MariaDB server postinst script
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 19 Feb 2022 16:00:00 -0800
++
++mariadb-10.6 (1:10.6.5-2) unstable; urgency=medium
++
++ * Fix misc failures in 10.6 detected by Debian QA systems
++ - Revert systemd extra and socket files to fix build=all
++ - Backport fix for test cte_nonrecursive failure
++ - Disable test main.func_math on more platforms
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 14 Dec 2021 20:05:25 -0800
++
++mariadb-10.6 (1:10.6.5-1) unstable; urgency=medium
++
++ * New upstream version 10.6.5.
++ * Drop MIPS and libatomic patches applied now upstream
++ * Enable Numa support (Closes: #861553)
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 27 Nov 2021 13:48:25 -0800
++
++mariadb-10.6 (1:10.6.4-1) unstable; urgency=medium
++
++ [ Bas Couwenberg ]
++ * Don't require debian.cnf to be executable in logrotate (Closes: #994284)
++
++ [ Otto Kekäläinen ]
++ * Add new overrides to be clean on Lintian v2.105.0
++ * Salsa-CI: Add workarounds for Stretch->Bookworm upgrade bugs
++ * Salsa-CI: Add testing for Bullseye upgrades and backports
++ * Extend README.Contributor to include more QA and debugging tips
++ * Make RocksDB plugin depend on python3:any to be Lintian clean
++ * Adopt DEP-14 for the git repository layout
++ * Import new upstream major release MariaDB 10.6.4
++ * Update Debian packaging for MariaDB 10.6 series
++ * Clean up d/copyright and remove obsolete licence-reconcile config
++ * Extend Breaks/Replaces to cover all known MySQL variants
++ * Skip upstream tests that are permanently broken
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 21 Oct 2021 11:02:17 +0300
++
++mariadb-10.5 (1:10.5.12-1) unstable; urgency=medium
++
++ * New upstream version 10.5.12. Includes security fixes for:
++ - CVE-2021-2389
++ - CVE-2021-2372
++ * Drop patches applied upstream in MariaDB S3 plugin
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 08 Aug 2021 20:33:47 -0700
++
++mariadb-10.5 (1:10.5.11-1) unstable; urgency=medium
++
++ * New upstream version 10.5.11. Includes several important bug fixes,
++ including a replication hang (Closes: #991399, Closes: #989400)
++ * Cleanup, documentation and testing:
++ * Drop backported patch for armfh build now in 10.5.11 from upstream.
++ * Drop patch no longer needed with latest gcc-10 (Closes: #972564)
++ * Save autopkgtests results as JUnit-compatible XML-report
++ * Salsa-CI: Verify wrap-and-sort usage and correctness of patches/series
++ * Remove rocksdb_build_git_date from RocksDB binaries to make them
++ build in a reproducible way, thus making the entire MariaDB finally
++ reproducible (Closes: #976985)
++
++ [ Andreas Beckmann ]
++ * Ease switching from galera-3 to galera-4 on upgrades from buster
++ (Closes: #990708, Closes: #976147, Closes: #977137)
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 25 Jul 2021 15:38:34 -0700
++
++mariadb-10.5 (1:10.5.10-2) unstable; urgency=medium
++
++ * Bugfix: Revert upstream code change to fix armhf build (Closes: #988629)
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 23 May 2021 21:04:38 -0700
++
++mariadb-10.5 (1:10.5.10-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.5.10. Includes security fixes for (Closes: #988428):
++ - CVE-2021-2154
++ - CVE-2021-2166
++ * Previous release 10.5.9 included security fixes additionally for:
++ - CVE-2021-27928
++ * Previous release 10.5.7 included security fixes additionally for:
++ - CVE-2021-2194
++ * Previous release 10.5.5 included security fixes additionally for:
++ - CVE-2021-2022
++ * Update symbols to include new one from MariaDB Client 3.1.13
++ * Misc Salsa-CI fixes for better QA
++ * Innotop: Add support for MariaDB 10.5+ (Closes: #941986)
++ * Bugfix: Ensure upstream 1556 patch is included fully (Closes: 987231)
++ * Bugfix: Don't create /usr/share/mysql/*.flag files (Closes: #985870)
++ * Misc spelling fixes
++
++ [ Glenn Strauss ]
++ * Mark systemd files [linux-any] in debian/*.install
++
++ [ Arnaud Rebillout ]
++ * Fix postinst trigger when systemd is not running (Closes: #983563)
++
++ [ Faustin Lammler ]
++ * GitLab CI now supports timeout for specific jobs
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 16 May 2021 11:36:38 -0700
++
++mariadb-10.5 (1:10.5.9-1) unstable; urgency=medium
++
++ * New upstream version 10.5.9
++ * Remove transitional libmariadbclient-dev empty metapackage
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 22 Feb 2021 21:32:47 +0200
++
++mariadb-10.5 (1:10.5.8-3) unstable; urgency=medium
++
++ * Re-introduce deprecated transitional libmariadbclient-dev package
++ so that the libmariadbclient-dev from 10.5 can replace the existing
++ libmariadbclient-dev form 10.3 and thus allow MariaDB 10.5 to
++ migrate from Debian unstable to testing.
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 23 Nov 2020 22:14:57 +0200
++
++mariadb-10.5 (1:10.5.8-2) unstable; urgency=medium
++
++ * Fix FTBFS on mipsel/mips64el due to test main.drop failure
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 17 Nov 2020 17:07:55 +0200
++
++mariadb-10.5 (1:10.5.8-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Revert back to 1fc0f45a as the armhf build failure was due to GCC bug
++ * Salsa-CI: salsa-ci-team/pipeline#173 seems fixed, stop allowing failure
++ * Filter out extra 3rd party sources directly when importing new upstream
++ * New upstream version 10.5.7. Includes security fixes for:
++ - CVE-2020-28912
++ - CVE-2020-14812
++ - CVE-2020-14789
++ - CVE-2020-14776
++ - CVE-2020-14765
++ * Clean away from d/copyright files that are no longer in the sources
++ * Sync debian/* changes from upstream 10.5.7 release
++ * Clean away columnstore sources during build and ignore all CS issues
++ * New upstream version 10.5.8
++ - Includes criticat fix for arbitrary InnoDB buffer pool and data file
++ corruption issue (MDEV-24096)
++ * Add patch to workaround armhf build failure due to gcc segfault
++
++ [ Helmut Grohne ]
++ * Fix FTCBFS: Add native libssl-dev to Build-Depends (Closes: #973388)
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 13 Nov 2020 09:20:28 +0200
++
++mariadb-10.5 (1:10.5.6-2) unstable; urgency=medium
++
++ [ Miroslav Kure ]
++ * Update Czech translation of debconf messages (Closes: #972441)
++
++ [ Otto Kekäläinen ]
++ * Salsa-CI: Circumvent Bug#972552 so upgrade tests work again
++ * Salsa-CI: Install more packages to cover more in upgrade tests
++ * Automatically remove /etc/logrotate.d/mysql-server (Closes: #971399)
++ * Fix debci: Skip main.failed_auth_unixsocket on armhf and i386
++ * Revert "Allow libnuma-dev on armhf as well"
++ * Switch to using system OpenSSL (Closes: #787118)
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 26 Oct 2020 14:13:56 +0200
++
++mariadb-10.5 (1:10.5.6-1) unstable; urgency=medium
++
++ * New upstream version 10.5.6. Includes security fixes for:
++ - CVE-2020-15180
++ * Include debian/ when importing new upstream releases
++ - This will help to follow upstream packaging changes and prevent
++ divergence in packaging code upstream vs. downstream.
++ * Unify config file syntax style
++ * Allow libnuma-dev on armhf as well
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 15 Oct 2020 11:55:14 +0300
++
++mariadb-10.5 (1:10.5.5-3) unstable; urgency=medium
++
++ [ Helmut Grohne ]
++ * Fix cross-compilation, amend commit f0ba31e1
++
++ [ Aurelien Jarno ]
++ * Correctly link pthread so riscv64 builds pass (Closes: #933151)
++
++ [ Otto Kekäläinen ]
++ * Revert "Automatically use libatomics on 64-bit archs (Closes: #933151)"
++ * Update MTR test skip lists after full test runs in Debian experimental
++ * Clean up d/rules and patches for issues that to best knowledge were
++ temporary and not needed anymore in MariaDB 10.5.5
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 09 Oct 2020 10:06:04 +0300
++
++mariadb-10.5 (1:10.5.5-2) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Salsa-CI: Extend feature tests to ensure TLS connections work at v1.2
++ * Fix x32 compilation issue (Closes: #970662)
++ * Implement unified logrotate from upstream PR#1556 (Closes: #971399)
++ * Fix upgrade from Percona.com by ensuring server uses mariadb.cnf
++ * Revert emptying /etc/mysql/debian.cnf (Closes: #971256)
++ * Use build flag to enforce default charset as utf8mb4 (Closes: #933063)
++ * Remove "Multi-Arch: same" from libmariadbd-dev
++ * Disable flaky MTR tests to get builds pass
++ * Automatically use libatomics on 64-bit archs (Closes: #933151)
++
++ [ Daniel Black ]
++ * Fix upgrade from MySQL.com with a new 'auth_socket' rename
++
++ [ Helmut Grohne ]
++ * Fix FTCBFS so cross-compiling works (Closes: #971579)
++ - Add native dependencies on gnutls, libedit and ncurses.
++ - Use a native perl interpreter during build.
++ - Let dh_auto_configure pass -DCMAKE_SYSTEM_NAME to cmake.
++ - Keep default CMAKE_BUILD_TYPE=RelWithDebInfo instead of debhelper's None.
++ - Cache the per-architecture stack direction.
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 06 Oct 2020 14:44:39 +0300
++
++mariadb-10.5 (1:10.5.5-1) unstable; urgency=medium
++
++ * New upstream version 10.5.5 (Closes: #968895)
++ - Drop patches that are obsolete or applied upstream in 10.5
++ - Rename most occurrences of 10.4 to 10.5 after importing 10.5 series
++ - Add Breaks/Replaces for 10.5 on previous 10.4 versions
++ - Stop suggesting tinyca, upstream project does not exist anymore
++ - Sync some changes from upstream MariaDB 10.5 debian/ directory
++ - Update d/copyright for MariaDB 10.5
++ - Disable ColumnStore, not mature enough for Debian yet
++ - Remove mariadb-plugin-tokudb as upstream TokuDB is not maintained anymore
++ - Introduce new package mariadb-plugin-s3 new in MariaDB 10.5
++ - Include caching_sha2_password.so plugin for libmariadb3 (Closes: #962597)
++ - Remove unnecessary charset stanza from client config (Closes: #879099)
++ * Remove deprecated transitional libmariadbclient-dev package
++ * Correct documentation about systemd using debian-start (Closes: #866782)
++ * Add NEWS item about MySQL 8.0 in-place binary incompatibility
++ * Add Provides: libmysqld-dev now as the mysql-8.0 stopped providing it
++ * Install Spider with a simple spider.cnf (Closes: #917818)
++ * Remove faulty encryption.preset file installed in subdirectory
++ * Salsa-CI: Refactor common parts into reusable sections
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 25 Sep 2020 19:56:59 +0300
++
++mariadb-10.4 (1:10.4.14-1~exp1) experimental; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.4.14
++ - Includes fix for RocksDB build failure on arch riscv64
++ * Add Breaks/Replaces for mysql-client-core-8.0 that ships myisam_ftdump
++
++ [ Christian Göttsche ]
++ * Prevent executable stack due to objects compiled from assembly
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 23 Aug 2020 13:20:04 +0300
++
++mariadb-10.4 (1:10.4.13-1~exp1) experimental; urgency=medium
++
++ * New upstream version 10.4.13. Includes security fixes for:
++ - CVE-2020-2752
++ - CVE-2020-2760
++ - CVE-2020-2812
++ - CVE-2020-2814
++ - CVE-2020-13249
++ - Includes fix for MDEV-21586: Server does not start if lc_messages setting
++ was not English (Closes: #951059)
++ * Restructure and extend d/copyright to cover libmariadb (Closes: #962541)
++ * Simplify autopkgtest 'smoke' to be easier to debug
++ * Add patch to fix RocksDB detection of ZSTD
++ * Update libmariadb symbols for upstream release 3.1.8
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 29 Jun 2020 09:47:07 +0300
++
++mariadb-10.4 (1:10.4.12-1~exp3) experimental; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Make mariadb-client-10.4 Recommends libdbd-mariadb-perl as primary option
++ * Detect MySQL 8.0 based on undo_001 file as *.flag is buggy in mysql-8.0
++
++ [ Faustin Lammler ]
++ * Fix systemd aliases (Closes: #932289)
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 10 Apr 2020 11:03:02 +0300
++
++mariadb-10.4 (1:10.4.12-1~exp2) experimental; urgency=medium
++
++ [ Christian Göttsche ]
++ * Prevent executable stack due to objects compiled from assembly
++
++ [ Bastian Germann ]
++ * Link with libedit instead of readline5 (Closes: #940879)
++
++ [ Otto Kekäläinen ]
++ * Fix mysqld crash on s390x that stemmed from WolfSSL
++ * Extend contributor README with debugging tips
++ * Clean up -dev packages from excess private files
++ * Make full contents, also header files, explicit in -dev packages
++ * Remove entire sql-bench in debian/rules to simplify not-installed listings
++ * Remove obsolete AUTH_SOCKET build flag
++ * Add missing mariadb-ldb to mariadb-plugin-rocksdb
++ * Install files that belong to mariadb-test instead of not-installed
++ * Ignore mariadb-config.1 since there is no mariadb-config binary
++ * Enforce --fail-missing in debian/rules to not miss any uninstalled files
++ * Unify server preinst and postrm server stopping function
++ * Move mariadb-upgrade to same package as mysql-upgrade and manpage
++ * Update package to use debhelper level 10
++ * Install arch dependent mariadb.pc in lib/ with patch from upstream
++ * Move binary mariadb-tzinfo-to-sql to server package like upstream has
++ * Don't install useless extra logrotate script or test config helper
++ * Add patch for man page fixes from upstream 10.5 pull request
++ * Add patch to backport spelling fixes from upstream 10.5 pull request
++ * Include new man pages for mytop and myrocks_hotbackup in packaging
++ * Use https protected nluug.nl server for upstream repo to watch
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 17 Mar 2020 15:05:39 +0200
++
++mariadb-10.4 (1:10.4.12-1~exp1) experimental; urgency=medium
++
++ * New upstream version 10.4.12
++ - Drop patches applied upstream in 10.4
++ - Sync debian/* improvements done in upstream MariaDB 10.4 release
++ - Update Galera to version 4
++ - Update debian/copyright for MariaDB 10.4
++ - Sync non-functional delta from upstream 10.4
++ - Sync AppArmor profile handling from MariaDB 10.4
++ - Sync server stopping logic from MariaDB 10.4 preinst/postinst/postrm
++ - Package PAM tool and user map introduced in upstream MariaDB 10.4
++ - Clean away versioned breaks/replaces on older generation packages
++ - Update maintainer and contributor docs for MariaDB 10.4
++ - Add patch from MDEV-21691 so mysql-test-run works out-of-source tree
++ - Upstream release 10.4.12 included security fixes for:
++ - CVE-2020-2574
++ - CVE-2020-7221
++ - Previous version 10.4.9 included security fixes for:
++ - CVE-2020-2780
++ - Previous version 10.4.7 included security fixes for:
++ - CVE-2020-2922
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 18 Feb 2020 20:24:40 +0200
++
++mariadb-10.3 (1:10.3.22-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.3.22. Includes security fixes for:
++ - CVE-2020-2574
++ * Update conflicts/breaks/replaces for MySQL 8.0
++ * Add Rules-Requires-Root definition to control file
++ * Activate NO_UPDATE_BUILD_VERSION to make RocksDB build reproducible
++ * Strip path from Mroonga to make the build reproducible
++ * Update Debian Policy version
++ * Simplify and extend Gitlab-CI testing by using more of Salsa-CI features
++ * Prefer salsa-ci.yml naming over gitlab-ci.yml since we inherit Salsa-CI
++ * Add Breaks/Replaces for mysql-client-5.7 that ships myisam_ftdump
++
++ [ Christian Göttsche ]
++ * Set correct SELinux contexts on package installation (Closes: #948424)
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 28 Jan 2020 22:12:28 +0200
++
++mariadb-10.3 (1:10.3.21-2) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Update Python dependencies and recommends to Python 3 (Closes: #945697)
++ * Remove deprecated basedir config from debian.cnf (Closes: #947553)
++
++ [ James Clarke ]
++ * Fix RocksDB on GNU/kFreeBSD (Closes: #920994)
++ * Use versioned symbols on GNU/kFreeBSD
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 07 Jan 2020 09:01:10 +0200
++
++mariadb-10.3 (1:10.3.21-1) unstable; urgency=low
++
++ [ Faustin Lammler ]
++ * Remove no more needed lintian overrides
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.3.21
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 11 Dec 2019 18:01:43 +0200
++
++mariadb-10.3 (1:10.3.20-1) unstable; urgency=high
++
++ * New upstream version 10.3.20. Includes fix for regression:
++ - MDEV-20987: InnoDB fails to start when FTS table has FK relation
++ * Remove obsolete fields Name, Contact from debian/upstream/metadata
++ * Gitlab-CI: Print artifact sizes to ensure it stays under 100 MB
++ * Gitlab-CI: Adapt CI jobs for Debian Sid work
++ * Update README.Maintainer with current Debian and Ubuntu release statuses
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 11 Nov 2019 23:55:37 +0200
++
++mariadb-10.3 (1:10.3.19-1) unstable; urgency=high
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.3.17. Includes security fixes for:
++ - CVE-2019-2938
++ - CVE-2019-2974
++ * Update symbols to match latest libmariadb_3
++ * Drop systemd service patch applied upstream
++
++ [ Faustin Lammler ]
++ * Fix typo in Readme
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 07 Nov 2019 21:26:49 +0200
++
++mariadb-10.3 (1:10.3.18-1) unstable; urgency=medium
++
++ * New upstream version 10.3.18. Fixes regression introduced in 10.3.17
++ (MDEV-20247: Replication hangs with "preparing" and never starts)
++ (Closes: #939819)
++ * Minort Gitlab-CI improvements
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 12 Sep 2019 15:51:04 +0300
++
++mariadb-10.3 (1:10.3.17-1) unstable; urgency=high
++
++ * New upstream version 10.3.17. Includes security fixes for:
++ - CVE-2019-2737
++ - CVE-2019-2739
++ - CVE-2019-2740
++ - CVE-2019-2758
++ - CVE-2019-2805
++ * Multiple Gitlab-CI/Salsa-CI improvements
++ * Dependency in resolveip is still included (Closes: #910902)
++ * Update libmariadb3 symbols to match MariaDB Connector C 3.1 API
++ * Add Lintian override for new test binary wsrep_check_version
++ * Gitlab-CI: Clean away one excess comment left from b9d633b38
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 02 Aug 2019 17:53:22 +0100
++
++mariadb-10.3 (1:10.3.16-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.3.16
++ * Make libzstd dependency versioned as RocksDB need at least 1.3.3.
++ This fixes build errors across different build environments.
++ * Update Gitlab CI for better quality control and long-term maintenance.
++
++ [ Helmut Grohne ]
++ * Improve cross building (Closes: #930314)
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 22 Jun 2019 16:45:18 +0200
++
++mariadb-10.3 (1:10.3.15-2) unstable; urgency=medium
++
++ [ Julien Muchembled ]
++ * Fixup RocksDB test on s390x, not available there
++
++ [ Otto Kekäläinen ]
++ * Purge deleted translations from debian/po
++ * Rename 'mariadbcheck' to 'mariadb-check' as upstream is doing in 10.4
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 07 Jun 2019 09:13:35 +0300
++
++mariadb-10.3 (1:10.3.15-1) unstable; urgency=high
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.3.15. Includes security fixes for (Closes: #928393):
++ - CVE-2019-2628
++ - CVE-2019-2627
++ - CVE-2019-2614
++ * Includes upstream fix for MDEV-18721: Host option in configuration file is
++ ignored (Closes: #921599)
++
++ [ Gregor Riepl ]
++ * Extend mariadb/mysql_config to support --libmysqld-libs (Closes: #928230)
++
++ [ Julien Muchembled ]
++ * Enable LZ4&Snappy for InnoDB and LZ4&Snappy&ZSTD for RocksDB
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 21 May 2019 10:45:37 +0300
++
++mariadb-10.3 (1:10.3.14-1) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Rename and re-organize gitlab-ci.yml stages
++ * Refactor gitlab-ci.yml to be optimal for a life in Buster
++ * Ensure cmake builds also apply CPPFLAGS flags for hardening to fully work
++ * New upstream version 10.3.14. Includes MariaDB Connector C 3.0.10 which
++ includes an improved impelemntation of mysql_real_connect() that respects
++ the my.cnf "host" option (Closes: #921599). This upstream release also
++ fixes an indexes problem on import dump SQL (MDEV-18577) and many other
++ InnoDB corruption issues (Closes: #924498).
++ * Enable automatic restarts from maint scripts in gitlab-ci.yml
++ * Automate renaming MySQL auth_socket correctly in mysql_upgrade
++ (Closes: #926231)
++
++ [ Andreas Beckmann ]
++ * Use piuparts with --testdebs-repo so dependencies of each install resolve
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 19 Apr 2019 14:38:26 +0300
++
++mariadb-10.3 (1:10.3.13-2) unstable; urgency=medium
++
++ [ Olaf ]
++ * Use upstream conf defaults (Closes: #905599). This is critically important
++ so that nothing defined in the configuration would hold back upstream
++ improvements in default option values.
++
++ [ Otto Kekäläinen ]
++ * Extend gitlab-ci.yml to include MySQL to MariaDB upgrade testing and also
++ refine automatic testing in many ways to ensure as little regressions as
++ possible.
++ * Automatically rename 'auth_socket' to 'unix_socket' when upgrading from
++ MySQL 5.7 which otherwise would completely fail.
++ * Drop the transitional libmariadbclient18 package (Closes: #925117)
++ * Move resolveip from mariadb-server-10.3 to -core-10.3 (Closes: #910902)
++ * Move all mariadb-server-x.x *.sql files to mariadb-server-core-x.x package
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 01 Apr 2019 23:05:31 +0300
++
++mariadb-10.3 (1:10.3.13-1) unstable; urgency=medium
++
++ * New upstream version 10.3.13
++ * Includes fixes for the following security vulnerabilities
++ (Closes: #920933):
++ - CVE-2019-2537
++ - CVE-2019-2529
++ * Update symbols list to match latest MariaDB Connector C release
++ * Use bundled SSL libraries instead of system OpenSSL (Closes: #921488)
++ * Fix 'Multi-Arch: same' stanzas (Closes: #920364)
++ * Implement proper version detection in maintainer scripts (Closes: #920415)
++ * Make libmariadb-dev depend on libgnutls28-dev (Closes: #917135)
++ * Extend Gitlab-CI significantly and update READMEs
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 24 Feb 2019 21:14:15 +0200
++
++mariadb-10.3 (1:10.3.12-2) unstable; urgency=medium
++
++ [ Adrian Bunk ]
++ * mariadb-plugin-tokudb: Properly generate the libjemalloc dependency
++
++ [ Otto Kekäläinen ]
++ * Re-enable jemalloc as Debian#843926 is now fixed (Closes: #918798)
++ * Update gitlab-ci.yml
++ * Follow upstream 'build' and 'lintian' steps
++ * Extend upgrade testing to upgrade from buster->sid (10.1 -> 10.3)
++ * Make libmariadb-dev-compat also Breaks+Replaces old libmariadbclient-dev
++ (Closes: #863675)
++ * Revert "Update libmariadb-dev.links to restore /usr/include/mysql.."
++
++ [ Andreas Beckmann ]
++ * Reintroduce libmariadbclient-dev as a transitional package
++ * Drop obsolete libmariadbclient18 symbols file
++ * Add Build-Depends-Package field to symbols file
++ * Minimize the upstream signing key by dropping all signatures
++ * Fix multiple Lintian issues
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 24 Jan 2019 20:56:46 +0200
++
++mariadb-10.3 (1:10.3.12-1) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * New upstream version 10.3.12
++ * Create the mysqlclient.pc symlink at correct path with /pkgconfig/
++ (Closes: #878340)
++ * Add libjemalloc2 as alternative dep for mariadb-plugin-tokudb
++ * Prevent mysql_upgrade from being triggered on every server restart
++ * Automate VERSION variable in mariadb-server installer scripts
++ * Improve logging and tag syslog messages with postinstall filename
++ * Make libmariadbclient18 Breaks old libpam-mysql and libdbd-mysql-perl
++
++ [ Samuel Thibault ]
++ * Do not try to install disks.so file not built on non-Linux
++ * Tune symbol visibility on GNU/Hurd too
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 08 Jan 2019 22:52:16 +0100
++
++mariadb-10.3 (1:10.3.11-3) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * Use sst_dump from package rocksdb-tools (Closes: #886853)
++ * Remove wsrep_sst_xtrabackup(-v2) already deprecated in upstream
++ * Make gitlab-ci.yml upgrade test specifically run mariadb-server-10.1->10.3
++ * Fix upstream RocksDB patch to fix Lintian complaints about source code
++ * Drop the MIPS Innobase patch that it is already fixed upstream
++ * Extend gitlab-ci.yml to test libmysql* interactions
++ * Ensure libmariadbd19 does not breaks/replace anything
++ * Make libmariadb-dev-compat break what is replaces
++ * Make libmariadb-dev breaks/replaces libmysqlclient-dev (Closes: #863675)
++ * Update Dutch translation by Frans Spiesschaert (Closes: #895461)
++
++ [ Faustin Lammler ]
++ * Fix 2 typo error in README contributor
++ * Lintian some complaints
++
++ [ Helge Deller ]
++ * Skip failing test on HPPA, it's not too important (Closes: #917395)
++
++ [ Scott Kitterman ]
++ * Update libmariadb-dev.links to restore /usr/include/mysql compatibility
++ symlinks lost when the default switched from 10.1 to 10.3 (Closes: #917266)
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 31 Dec 2018 16:39:33 +0200
++
++mariadb-10.3 (1:10.3.11-2) unstable; urgency=low
++
++ [ Vicențiu Ciorbaru ]
++ * Update c11_atomics patch to include mysys. This should fix both
++ mips and armel build failures.
++
++ [ Otto Kekäläinen ]
++ * Make libmariadb-dev depend on libssl-dev (Closes: #917135)
++ * Remove "Conflicts: libmariadbclient18 (<< 10.2.0)" (Closes: #917075)
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 24 Dec 2018 18:50:31 +0200
++
++mariadb-10.3 (1:10.3.11-1) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * Import to Debian latest major release of MariaDB (Closes: #867892)
++ * Packaging carries on all impromevements done on to the latest MariaDB
++ 10.1.x packages in Debian unstable up until Dec 15th 2018.
++ * Drop the Hurd socket patch that it is already applied upstream
++ * Update SSL/TLS keys as OpenSSL since 1.1.0 rejects weak keys by default
++ * Remove innodb_* options from server config that are default in 10.3
++ * Remove --skip-auth-anonymous-user deprecated in 10.3
++ * Include also arch specific skiplists in CI tests
++ * Make TokuDB explicitly depend on libjemalloc1
++ * Follow Salsa-CI changes and update build image name to 'dockerbuilder'
++ * Extend gitlab-ci to test installation and upgrade of MariaDB
++
++ [ Vicențiu Ciorbaru ]
++ * Refresh c11_atomics patch for 10.3
++ * Fix MEMORY storage engine test
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 20 Dec 2018 21:52:42 +0200
++
++mariadb-10.1 (1:10.1.37-3) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * Update translation templates
++ * Fix typo in commit 33d853128 so skip list is not reset when adding lines
++
++ [ Vicențiu Ciorbaru ]
++ * Fix mips compilation failure (__bss_start symbol missing)
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 08 Dec 2018 18:50:43 +0200
++
++mariadb-10.1 (1:10.1.37-2) unstable; urgency=low
++
++ [ Samuel Thibault ]
++ * Do not depend on libsystemd-dev on non-Linux
++ * On non-Linux, do not install files not built there
++ * Add hurd cmake configuration (Closes: #912902)
++
++ [ Otto Kekäläinen ]
++ * Add Gitlab-CI definition file that can test each commit to this repository
++ * Utilize upstream unstable-tests list in tests/upstream mysql-test-run.
++ This will make ci.debian.net pass as it will correctly ignore tests.
++ * Disable test unit.pcre_test on s390x that was failing in stretch-security
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 01 Dec 2018 18:17:18 +0200
++
++mariadb-10.1 (1:10.1.37-1) unstable; urgency=high
++
++ * New upstream version 10.1.37. Includes security fixes for:
++ - CVE-2018-3282
++ - CVE-2018-3251
++ - CVE-2018-3174
++ - CVE-2018-3156
++ - CVE-2018-3143
++ - CVE-2016-9843
++ * Update README.Contributor based on recent feedback
++ * Update README.Maintainer to match current best practices
++ * Move my_print_defaults to mariadb-server-core (Closes: #898367)
++ * Update Debian standards version to 4.2.1 (no changes)
++ * Fix minor Lintian complaints
++ * Add (and rename) new man pages
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 04 Nov 2018 19:11:19 +0200
++
++mariadb-10.1 (1:10.1.35-1) unstable; urgency=medium
++
++ * New upstream version 10.1.35. Includes security fixes for:
++ - CVE-2018-3066
++ - CVE-2018-3064
++ - CVE-2018-3063
++ - CVE-2018-3058
++ * Fix wrong-path-for-interpreter in innotop script
++ * Update Debian standards version
++ * Revert "Remove the mariadb-test-* packages" (Closes: #888956)
++ * Omit test plugins as they are not used by the tests and already deleted
++ * Define autopkgtest with isolation-container (Closes: #870408)
++ * Ship config examples et al in /usr/share/mysql (Closes: #878223)
++ * Extend the server README to clarify misunderstandings (Closes: #878215)
++ * Introduce mariadb-backup as a separate binary package, just like in upstream
++ * Fix bash syntax issues detected by Shellcheck
++ * Fix 'max key length is 767 bytes' errors (Closes: #886756)
++ * Remove GNU Hurd FTBFS patch that's been applied upstream (Closes: #882062)
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 07 Aug 2018 22:18:20 +0300
++
++mariadb-10.1 (1:10.1.34-1) unstable; urgency=medium
++
++ * New upstream release 10.1.34.
++ * Previous upstream version 10.1.33 included fixes for the following
++ security vulnerabilities:
++ - CVE-2018-2819
++ - CVE-2018-2817
++ - CVE-2018-2813
++ - CVE-2018-2787
++ - CVE-2018-2784
++ - CVE-2018-2782
++ - CVE-2018-2781
++ - CVE-2018-2771
++ - CVE-2018-2766
++ - CVE-2018-2761
++ - CVE-2018-2755
++ * Previous upstream version 10.1.31 included fixes for the following
++ security vulnerabilities:
++ - CVE-2018-2668
++ - CVE-2018-2665
++ - CVE-2018-2640
++ - CVE-2018-2622
++ - CVE-2018-2612
++ - CVE-2018-2562
++ * Previous upstream version 10.1.30 included fixes for the following
++ security vulnerabilities:
++ - CVE-2017-15365
++
++ [ Otto Kekäläinen ]
++ * Update VCS-* links to point to the new source repository
++ * Delete unnecessary systemd files introduced by upstream
++ * Add new files introduced by upstream to correct packages
++ * Mark selected tests as unstable so they don't stop the whole upload in vain
++ * Update d/control Uploaders to match current affairs
++ * Various minor Lintian fixes
++ [ Otto Kekäläinen ]
++ * Use the ccache symlinks made by update-ccache-symlinks, if available
++
++ [ Vicențiu Ciorbaru ]
++ * Extend libmariadbclient-rename.patch to cover TokuDB as well
++ * Disable disks.disks test
++
++ [ Rui Branco ]
++ * Updated Portuguese translation by Rui Branco (Closes: #871052)
++
++ [ Takuma Yamada ]
++ Updated Japanese translation by Takuma Yamada (Closes: #859481)
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 31 Jul 2018 21:52:16 +0800
++
++mariadb-10.1 (1:10.1.29-6) unstable; urgency=high
++
++ * Ignore failed tests on more non-release platforms (kfreebsd-i386,
++ kfreebsd-amd64 and sparc64)
++
++ -- Ondřej Surý <ondrej@debian.org> Thu, 23 Nov 2017 07:03:47 +0000
++
++mariadb-10.1 (1:10.1.29-5) unstable; urgency=high
++
++ * Update the -O3 -> -O2 patch to include more cmake files
++
++ -- Ondřej Surý <ondrej@debian.org> Wed, 22 Nov 2017 22:48:13 +0000
++
++mariadb-10.1 (1:10.1.29-4) unstable; urgency=high
++
++ * Change the default optimization from -O3 to -O2 in mysql_release.cmake
++ BUILD_CONFIG profile
++
++ -- Ondřej Surý <ondrej@debian.org> Wed, 22 Nov 2017 20:33:17 +0000
++
++mariadb-10.1 (1:10.1.29-3) unstable; urgency=medium
++
++ * Change the default optimization level to -O2 to fix arm64 build
++
++ -- Ondřej Surý <ondrej@debian.org> Wed, 22 Nov 2017 15:33:21 +0000
++
++mariadb-10.1 (1:10.1.29-2) unstable; urgency=medium
++
++ [ Otto Kekäläinen ]
++ * Update the d/changelog with CVEs
++
++ [ Ondřej Surý ]
++ * Revert to using system pcre library (Closes: #882329)
++ * Bump the epoch to fix the mess created by mariadb-10.2 upload
++ (Closes: #881898)
++
++ [ Christian Ehrhardt ]
++ * d/t/upstream: skip func_regexp_pcre on s390x
++
++ -- Ondřej Surý <ondrej@debian.org> Wed, 22 Nov 2017 06:03:17 +0000
++
++mariadb-10.1 (10.1.29-1) unstable; urgency=medium
++
++ * New upstream version 10.1.29, includes fixes for the following
++ security vulnerabilities:
++ - [CVE-2017-10378]: Optimizer component to cause denial of service
++ conditions
++ - [CVE-2017-10268]: Replication component to access data
++ - [MDEV-13819]: Server crashes in Item_func_in::val_int or Assertion
++ `in_item' failed in virtual longlong Item_func_in::val_int
++ * Remove the mariadb-test-* packages as they are now provided by
++ mariadb-10.2 (Closes: #881898)
++ * Rebase patches for new upstream version.
++
++ -- Ondřej Surý <ondrej@debian.org> Thu, 16 Nov 2017 15:24:36 +0000
++
++mariadb-10.1 (10.1.28-2) unstable; urgency=high
++
++ * Add libconfig-inifiles-perl to mariadb-client-10.1 depends to fix
++ mytop (Closes: #875708)
++ * Add mips64el to the list of platforms that are allowed to fail test
++ suite (Closes: #879637)
++
++ -- Ondřej Surý <ondrej@debian.org> Sun, 12 Nov 2017 11:03:20 +0000
++
++mariadb-10.1 (10.1.28-1) unstable; urgency=medium
++
++ * New upstream version 10.1.28
++ * Rebase patches on top of MariaDB 10.1.28
++ * Add extra symbols aliases for libmariadbclient_16
++
++ -- Ondřej Surý <ondrej@debian.org> Mon, 09 Oct 2017 22:07:43 +0000
++
++mariadb-10.1 (10.1.26-1) unstable; urgency=medium
++
++ * Ignore upstream debian/ directory when importing upstream tarball
++ * New upstream version 10.1.26
++ * Refresh patches for MariaDB 10.1.26
++ * Remove unstable tests patches for unstable build, so we see what is
++ really failing and what is not
++
++ -- Ondřej Surý <ondrej@debian.org> Thu, 10 Aug 2017 20:41:46 +0200
++
++mariadb-10.1 (10.1.25-1) unstable; urgency=medium
++
++ * New upstream version 10.1.25
++ * Update quilt patches on top of mariadb-10.1.25 release
++ * Explicitly add dh_systemd_start snippets to mariadb-server-10.1
++ because it's all messed up with different name for sysvinit ('mysql')
++ and systemd ('mariadb') (Closes: #865870)
++ * Don't disable PIE, it's enabled by upstream anyway (Closes: #865737)
++ * Add default socket location for client (Closes: #864662)
++
++ -- Ondřej Surý <ondrej@debian.org> Sun, 30 Jul 2017 14:15:48 +0200
++
++mariadb-10.1 (10.1.24-6) unstable; urgency=medium
++
++ * Run invoke-rc.d mysql maintscript snippets only when running under
++ sysvinit (Closes: #864593)
++
++ -- Ondřej Surý <ondrej@debian.org> Wed, 21 Jun 2017 11:12:16 +0200
++
++mariadb-10.1 (10.1.24-5) unstable; urgency=medium
++
++ * Add @SYSTEMD_EXECSTARTPOST@ replacement token to mariadb@.service, so
++ the /var/run/mysqld directory is created even for multi-server setup
++ (Closes: #865083)
++
++ -- Ondřej Surý <ondrej@debian.org> Mon, 19 Jun 2017 08:52:26 +0200
++
++mariadb-10.1 (10.1.24-4) unstable; urgency=medium
++
++ [ James Cowgill ]
++ * Disable jemalloc on mips*. (Closes: #864340)
++ * Update C11 atomics to have correct semantics (Closes: #864774)
++
++ [ Ondřej Surý ]
++ * Refresh patches after C11 atomics patch update
++ * Merge mytop script improvements from src:mytop package (Original
++ patches by Philipp Matthias Hahn, Werner Detter, Olaf van der Spek,
++ and Steffen Zieger) (Closes: #864762)
++
++ [ Svante Signell ]
++ * Fix FTBFS on Debian GNU/Hurd (Closes: #861166)
++
++ -- Ondřej Surý <ondrej@debian.org> Mon, 19 Jun 2017 07:09:50 +0200
++
++mariadb-10.1 (10.1.24-3) unstable; urgency=medium
++
++ * Team upload.
++ * Add mips-innobase-atomic.patch, fixing FTBFS on 32-bit mips*, thanks to
++ James Cowgill. (Closes: #864298)
++
++ -- Andreas Beckmann <anbe@debian.org> Wed, 07 Jun 2017 02:23:44 +0200
++
++mariadb-10.1 (10.1.24-2) unstable; urgency=medium
++
++ * Add Breaks: cqrlog (<< 1.9.0-5~) to ensure correct upgrade order
++ (Closes: #864159)
++
++ -- Ondřej Surý <ondrej@debian.org> Tue, 06 Jun 2017 14:29:52 +0200
++
++mariadb-10.1 (10.1.24-1) unstable; urgency=medium
++
++ * New upstream version 10.1.24, includes fixes for the following
++ high-priority regression fixes:
++ + MDEV-11842: Fail to insert on a table where a field has no default
++ + MDEV-12075: innodb_use_fallocate does not work in MariaDB
++ Server 10.1.21
++ * Refresh patches on top of MariaDB 10.1.24
++ * Fix FTBFS in tests: Add cracklib-runtime to Build-Depends
++
++ -- Ondřej Surý <ondrej@debian.org> Tue, 06 Jun 2017 09:25:19 +0200
++
++mariadb-10.1 (10.1.23-9+deb9u1) stretch; urgency=medium
++
++ [ Ondřej Surý ]
++ * Add Breaks: cqrlog (<< 1.9.0-5~) to ensure correct upgrade order
++ (Closes: #864159)
++
++ -- Andreas Beckmann <anbe@debian.org> Wed, 07 Jun 2017 21:11:23 +0200
++
++mariadb-10.1 (10.1.23-9) unstable; urgency=medium
++
++ * Fix the invalid location of insserv configuration snippet
++ (Thanks Michael Biebl for catching that)
++
++ -- Ondřej Surý <ondrej@debian.org> Fri, 26 May 2017 09:26:33 +0200
++
++mariadb-10.1 (10.1.23-8) unstable; urgency=medium
++
++ * Use /etc/insserv.conf.d/mariadb to provide $database system facility
++ (Closes: #862447)
++
++ -- Ondřej Surý <ondrej@debian.org> Sat, 13 May 2017 11:08:43 +0200
++
++mariadb-10.1 (10.1.23-7) unstable; urgency=medium
++
++ * Remove hard Breaks/Replaces with mysql-server and mysql-client
++ * Move virtual packages from Breaks to Conflicts (Debian Policy 7.6.2)
++
++ -- Ondřej Surý <ondrej@debian.org> Fri, 12 May 2017 12:21:33 +0200
++
++mariadb-10.1 (10.1.23-6) unstable; urgency=medium
++
++ * Also fix the same assertion failure in xtradb (Closes: #862103)
++
++ -- Ondřej Surý <ondrej@debian.org> Mon, 08 May 2017 19:51:47 +0200
++
++mariadb-10.1 (10.1.23-5) unstable; urgency=medium
++
++ * Add upstream patch to fix assertion failure in InnoDB storage engine
++ (Closes: #862103)
++
++ -- Ondřej Surý <ondrej@debian.org> Mon, 08 May 2017 17:21:55 +0200
++
++mariadb-10.1 (10.1.23-4) unstable; urgency=medium
++
++ * Properly declare conflict on mytop (Closes: #861913)
++
++ -- Ondřej Surý <ondrej@debian.org> Mon, 08 May 2017 11:31:13 +0200
++
++mariadb-10.1 (10.1.23-3) unstable; urgency=medium
++
++ * Remove two internal symbols (ll2str and longlong2str) from
++ kfrebsd-amd64 symbols file
++
++ -- Ondřej Surý <ondrej@debian.org> Thu, 04 May 2017 13:19:00 +0200
++
++mariadb-10.1 (10.1.23-2) unstable; urgency=medium
++
++ * Add CVE list for 10.1.23 release
++ * Fix FTBFS on kfrebsd-any due missing .service files
++
++ -- Ondřej Surý <ondrej@debian.org> Thu, 04 May 2017 10:55:06 +0200
++
++mariadb-10.1 (10.1.23-1) unstable; urgency=medium
++
++ * New upstream version 10.1.23, includes fixes for the following
++ security vulnerabilities:
++ - [CVE-2017-3302]: use-after-free in C client library for MySQL
++ - [CVE-2017-3313]: unauthorized (local) access to critical data or
++ complete access to all MySQL Server accessible data
++ - [CVE-2017-3308]: unauthorized (network) ability to cause a hang or
++ frequently repeatable crash
++ - [CVE-2017-3309]: unauthorized (network) ability to cause a hang or
++ frequently repeatable crash
++ - [CVE-2017-3453]: unauthorized (network) ability to cause a hang or
++ frequently repeatable crash
++ - [CVE-2017-3456]: unauthorized (network) ability to cause a hang or
++ frequently repeatable crash
++ - [CVE-2017-3464]: unauthorized update, insert or delete access to some
++ of MySQL Server accessible data
++ * Refresh debian/patches on top of MariaDB 10.1.23 release
++ * debian/gbp.conf: Filter most common cruft in the orig tarball
++ * debian/rules: Use --fail-missing to catch extra upstream files
++ * debian/*.manpages: Merge into debian/*.install
++ * debian/*.install: Add few missing binaries into various packages
++ * Declare mariadb-plugin-tokudb as available only on (linux-)amd64
++ to fix FTBFS on kfreebsd-amd64
++ * Remove the extra sanity check as it is already there via standard
++ dh_installinit (|| exit 0) (Closes: #861782)
++ * Stop /usr/sbin/mysqld in prerm script even with systemd
++ * Move mariadb.pc into proper multiarch directory (Closes: #852621)
++ * Add libarchive-dev needed by mariabackup to Build-Depends
++ * debian/control: run wrap-and-sort -a
++ * Move mysql_install_db from mariadb-server-10.1 to
++ mariadb-server-core-10.1 (Closes: #840646)
++ * Add Provides: $database to mysql.init - this partially addresses
++ #852776
++ * Call dh_systemd_start with --no-restart-after-upgrade
++ (Closes: #853137)
++ * d/rules: Remove dh_prep override (legacy cruft)
++
++ -- Ondřej Surý <ondrej@debian.org> Thu, 04 May 2017 07:23:23 +0200
++
++mariadb-10.1 (10.1.22-4) unstable; urgency=medium
++
++ * Fix small typo in d/rules that caused MySQL version suffix to not
++ contain information about Debian build
++
++ -- Ondřej Surý <ondrej@debian.org> Sat, 29 Apr 2017 21:56:23 +0200
++
++mariadb-10.1 (10.1.22-3) unstable; urgency=medium
++
++ * Use pidof instead of pgrep, so we don't have to depend on procps
++ * Stop stopping mariadb server that many times and just add a simple
++ check to preinst that it has been really stopped (Closes: #852495)
++ * Fix small typo in gettid patch
++ * Disable TokuDB on kfreebsd-amd64
++
++ -- Ondřej Surý <ondrej@debian.org> Tue, 28 Mar 2017 22:59:06 +0200
++
++mariadb-10.1 (10.1.22-2) unstable; urgency=medium
++
++ [ Ondřej Surý ]
++ * Add correct kfreebsd-i386 symbols file (but this needs to be fixed in
++ how upstream uses linker)
++ * Update italian translation (Closes: #858300)
++
++ [ Otto Kekäläinen ]
++ * Add Vietnamese translation by Trần Ngọc Quân
++ * Add Finnish translation by Antti Järvinen
++
++ [ Ondřej Surý ]
++ * Disable test suite on hppa, don't fail test suite on more unstable
++ platforms: alpha, powerpc, and x32
++ * Add swedish debconf translation (Closes: #858536)
++ * Add Catalan debconf translation (Closes: #858632)
++ * Use thr_self() as gettid implementation onf __FreeBSD_kernel__
++ * Make mariadb-server-10.1 installable on kFreeBSD and Hurd (Closes: #851687)
++ * Update Turkish debconf translation (Closes: #858340)
++ * Disable specific tests on hppa to make the build succeed (Courtesy of
++ John David Anglin) (Closes: #858869)
++
++ -- Ondřej Surý <ondrej@debian.org> Tue, 28 Mar 2017 22:59:01 +0200
++
++mariadb-10.1 (10.1.22-1) unstable; urgency=high
++
++ [ Otto Kekäläinen ]
++ * New upstream release 10.1.22. Includes fixes for the following
++ security vulnerabilities:
++ - CVE-2017-3313
++ - CVE-2017-3302
++ * New upstream also includes fix to logrotate so that it no longer
++ risks interrupting binary/relay log processing on the server.
++ https://github.com/MariaDB/server/commit/156cf86defdc59353f37f6
++ * Add a NEWS.Debian item with same contents as the Stretch release notes
++
++ [ Ondřej Surý ]
++ * Add myself to Uploaders
++ * Use https URI for Homepage
++ * Use /usr/share/dpkg/default.mk to define dpkg-architecture and other
++ build variables
++ * Install and use non-versioned symbols files for kFreeBSD and Hurd
++ architectures
++ * Make mysql_config and mariadb.pc return -lmariadbclient instead of
++ missing -lmysqlclient
++ * Add mysqlclient.pc -> mariadb.pc symlink into
++ libmariadbclient-dev-compat package
++ * MDEV-11884: Fix logrotate failing if mysqld is not running (Closes: #830976)
++
++ -- Ondřej Surý <ondrej@debian.org> Sun, 19 Mar 2017 15:23:26 +0100
++
++mariadb-10.1 (10.1.21-5) unstable; urgency=low
++
++ [ James Clarke ]
++ * Make debian/mariadb-server-10.1.install executable (Closes: #852728)
++ * Allow mariadb-plugin-tokudb/mroonga on non-linux and non-release arches
++ * Detect whether libatomic is needed rather than hard-coding for mips
++ * Use host architecture, not build architecture, and clean up variables
++ * General clean-up in d/rules
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 27 Jan 2017 20:42:36 +0200
++
++mariadb-10.1 (10.1.21-4) unstable; urgency=low
++
++ * Hotfix to full build failure: Add missing galera_new_cluster.1 to patch
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 26 Jan 2017 23:33:32 +0200
++
++mariadb-10.1 (10.1.21-3) unstable; urgency=low
++
++ [ Ian Gilfillan ]
++ * Extend WSREP and Galera man pages patch to cover all commands
++
++ [ Dieter Adriaenssens ]
++ * Specify Architecture for mariadb-plugin-mroonga and mariadb-plugin-tokudb
++ (Closes: #852709)
++
++ [ James Clarke ]
++ * Fix FTBFS on non-Linux architectures (Closes: #852728)
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 26 Jan 2017 22:18:26 +0200
++
++mariadb-10.1 (10.1.21-2) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * Implement systemd packaging the Debian way
++ * Extend README.Debian regarding new systemd files
++ * Add config file comments about SysV init and systemd differences
++ * Extend Debian.README with section about mixing with packages MariaDB.org
++ * Update /etc/init.d/mysql after comparison with upstream MariaDB 10.1.21
++ * Run chown much faster on the datadir during install/update
++ * Check if /var/lib/mysql exists before running 'find' on it
++ * Skip mysqld stopping if no mysqld process is running at all
++ * Update French debconf translation by Baptiste Jammet (Closes: #850066)
++ * Remove unnecessary XS-Testsuite field (as instructed by Lintian)
++ * Add a modified version of upstream autobake-deb script to utilize CI tools
++ * Fix server config example on how to enable SSL with YaSSL (Closes: #851132)
++ * Make commands mariadb and mariadbcheck available with symlinks
++
++ [ Jean Weisbuch ]
++ * Update Innotop to latest version
++
++ [ Ian Gilfillan ]
++ * Add wsrep_* man pages
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 25 Jan 2017 10:42:45 +0200
++
++mariadb-10.1 (10.1.21-1) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * New upstream release 10.0.28. Includes fixes for the following
++ security vulnerabilities (Closes: #851759, Closes: ##849435):
++ - CVE-2017-3318
++ - CVE-2017-3317
++ - CVE-2017-3312
++ - CVE-2017-3291
++ - CVE-2017-3265
++ - CVE-2017-3258
++ - CVE-2017-3257
++ - CVE-2017-3244
++ - CVE-2017-3243
++ - CVE-2017-3238
++ - CVE-2016-6664
++ * Add new program introduced in upstream 10.1.21: mysqld_safe_helper
++ * Deb-CI: remove parameter --skip-ndbcluster not available in 10.1 any more
++ * Make libmariadbclient18 depend on mysql-common only (Closes: #850216)
++ * Fix misleading config file comment (Closes: #677223)
++ * Update preinst variable $this_version from 10.0 to 10.1 (Closes: #851257)
++
++ [ Kristian Nielsen ]
++ * Re-implement passwordless root login (Closes: #851131)
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 19 Jan 2017 11:33:01 +0200
++
++mariadb-10.1 (10.1.20-3) unstable; urgency=low
++
++ [ Vicențiu Ciorbaru ]
++ * Update debian rules to also account for mipsel
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 24 Dec 2016 20:23:23 +0200
++
++mariadb-10.1 (10.1.20-2) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * Upload to unstable
++ * Previous version string should had been ~exp1, thus this
++ first upload to unstable is -2 and not -1 as normal
++ * Disable test suite temporairly due to false regressions
++
++ [ Dieter Adriaenssens ]
++ * fix Vcs-git link format and repo name
++ * update 10.0 to 10.1 in README files
++
++ [ Vicențiu Ciorbaru ]
++ * Fix mips missing atomics primitives
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 24 Dec 2016 09:54:59 +0200
++
++mariadb-10.1 (10.1.20-1) experimental; urgency=low
++
++ * Upgrade package to new MariaDB 10.1.x series:
++ - New upstream release 10.1.20
++ - Refresh patches after 10.1.20 import
++ - Update strings 10.0 -> 10.1 after importing 10.1.20
++ - Refresh patches after 10.1.20 import
++ - Update d/control after 10.1 import
++ - Use https protected git url in d/control
++ - Backwards compatible XS-Testsuite syntax in d/control
++ - Import debian/* changes done in upstream 10.1
++ - Replace deprecated iproute with iproute2
++ - Remove unnecessary dependencies as packages are Essential anyway
++ - Remove unnecessary and big file mysql_embedded
++ - Switch to 10.1 style build flag for unix socket auth module in d/rules
++ - Update d/copyright after 10.1 import
++ - Add missing aria_add_gis_sp.sql to mariadb-server-10.1
++ - Ship SELinux and AppArmor files with the server, but as inactive
++ - New package from upstream 10.1: GSS API (Kerberos) client and server
++ - Extend GSSAPI plugin descriptions to satisfy Lintian
++ - New plugin from upstream 10.1: Cracklib password validation
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 20 Dec 2016 22:46:59 +0200
++
++mariadb-10.0 (10.0.28-3) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * Move libmariadbd and -dev next to each other for a more logical flow in d/control
++ * Move mariadb-test to last in file for a more logical flow in d/control
++ * Clean away unused Lintian overrides
++ * Add Lintian override for impossible mysql_config multi-arch requirement
++ * Update Debian copyright based on the 2016 git log author list
++ * Remove unnecessary /var/lib/mysql-upgrade (Closes: #848620)
++
++ [ Vicențiu Ciorbaru ]
++ * Fix connect.upd test in armhf
++ * Fix mroonga/storage.index_read_multiple_double test in armhf
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 20 Dec 2016 21:59:47 +0200
++
++mariadb-10.0 (10.0.28-2) unstable; urgency=low
++
++ [ Samuel Thibault ]
++ * patches/hurd_socket.patch: Also avoid non-working socket path length check
++ on hurd-i386.
++ * rules: Drop symbols on hurd-i386 too (Closes: #842696).
++
++ [ Daniel Black ]
++ * Don't install private mysql header files in libmariadbclient-dev
++
++ [ Otto Kekäläinen ]
++ * Update libmariadbd18 description and contents to match latest upstream
++ * Mark missing Multi-Arch as suggested by Multiarch hinter
++ * Move plugins to $ARCH/*/mariadb18 to meet multiarch needs (Closes: #739452)
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 11 Nov 2016 22:03:33 +0200
++
++mariadb-10.0 (10.0.28-1) unstable; urgency=low
++
++ [ Vicențiu Ciorbaru ]
++ * Fix tokudb jemalloc linking
++
++ [ Otto Kekäläinen ]
++ * New upstream release 10.0.28. Includes fixes for the following
++ security vulnerabilities:
++ - CVE-2016-8283
++ - CVE-2016-7440
++ - CVE-2016-6663
++ - CVE-2016-5629
++ - CVE-2016-5626
++ - CVE-2016-5624
++ - CVE-2016-5616
++ - CVE-2016-5584
++ - CVE-2016-3492
++ * Drop 4 patches that have been applied upstream.
++ * Delete runnable files from mariadb-test-data as they were only
++ needed at build time to generate tests.
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 28 Oct 2016 22:51:14 +0300
++
++mariadb-10.0 (10.0.27-2) unstable; urgency=low
++
++ [ Dieter Adriaenssens ]
++ * Fix typo in README.Contributor
++ * Improve documentation on how to clean the build env
++
++ [ James Cowgill ]
++ * Mips build and testsuite fixes (Closes: #838557, Closes: #838914)
++ - Permit 93 as a valid value of the ENOTEMPTY error in the testsuite
++ - Correctly fix mips64 multiplication in taocrypt
++ - Ensure groonga is built with libatomic
++ - Handle unaligned buffers in connect's TYPBLK class
++ - Fix DEFAULT_MACHINE on mips
++ - Remove various tests from unstable-tests which now pass on MIPS
++ - Update debian/unstable-tests.mips*
++
++ [ Kristian Nielsen ]
++ * Fix missing path for perl in autopkgtest (Closes: #809022)
++ * Fix test failures on hppa due to wrong enoempty (Closes: #837369)
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 02 Oct 2016 09:22:59 +0300
++
++mariadb-10.0 (10.0.27-1) unstable; urgency=low
++
++ * New upstream release 10.0.27
++ * Remove 3 patches after 10.0.27 import as they have been applied
++ upstream.
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 07 Sep 2016 23:05:28 +0300
++
++mariadb-10.0 (10.0.26-3) unstable; urgency=low
++
++ [ Dieter Adriaenssens ]
++ * Add DEP-12 formatted upstream metadata file (Closes: #808421)
++
++ [ Vicențiu Ciorbaru ]
++ * Update innodb_xtradb patch to introduce memory barrier after lock
++ * Fix failing shutdown with gcc v6
++
++ [ Otto Kekäläinen ]
++ * Extend commit d5af196 with old name of package libmariadb-dev-compat
++ * Extend commit 8d2a7c9 and actually install the tokuftdump man page
++ * Update mariadb-test dependencies to include also libmariadbclient18
++ * Add path to fix for sporadically failing test main.information_schema_stats
++ * d/rules: NUMJOBS must have a default value
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 17 Aug 2016 00:31:02 +0300
++
++mariadb-10.0 (10.0.26-2) unstable; urgency=low
++
++ [ Vicențiu Ciorbaru ]
++ * Add patch to correctly revert changes from 10.0.26 that caused
++ build failure regression on PPC64el
++
++ [ Paul Gevers ]
++ * Add autopkg tests for MariaDB 10.0 (Closes: #809022)
++
++ [ Axel Beckert ]
++ * Extend mariadb-server to purge gracefully if datadir is a mountpoint
++ (Closes: #829491)
++
++ [ Ian Gilfillan ]
++ * Add a patch to provide a man page for tokuftdump
++
++ [ Robie Basak ]
++ * Re-add libmariadbclient18 and libmariadbclient-dev
++ * Add libmariadbclient-dev-compat package
++
++ [ Otto Kekäläinen ]
++ * d/control: libmariadbclient18 must be 'Multi-Arch: same'
++ * Make libmariadbclient-dev-compat conflict with libmariadb-dev-compat
++ (Closes: #831229)
++ * Add libmariadbclient-dev as dependency for libmariadbd-dev
++ * Replace hacky sed of libmysqlclient->libmariadbclient with proper patch
++ * Update symbols file to match newest libmariadbclient18
++ * Updated Danish translation by Joe Hansen (Closes: #830592)
++ * Remove mariadb-plugin-cassandra until libthrif-dev lands in unstable
++ * Make libdbd-mysql-perl and friends Recommends instead of strict Depends
++ (Closes: #793787)
++ * Documentation and spelling fixes
++ * Remove mysqlbug binary as it is not used for MariaDB
++ * Update default config files with more secure TLS examples
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 29 Jul 2016 21:42:50 +0300
++
++mariadb-10.0 (10.0.26-1) unstable; urgency=low
++
++ * Updated French translation by Baptiste Jammet (Closes: #826879)
++ * New upstream release 10.0.26. Includes fixes for the following
++ security vulnerabilities:
++ - CVE-2016-5440
++ - CVE-2016-3615
++ - CVE-2016-3521
++ - CVE-2016-3477
++ * Updated old changelog entries to include new CVE identifiers.
++ * Refresh patches after 10.0.26 import
++
++ -- Otto Kekäläinen <otto@debian.org> Fri, 24 Jun 2016 17:05:44 +0300
++
++mariadb-10.0 (10.0.25-1) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * Revert previous changes tailored for Ubuntu 16.04 compatibility.
++ * New upstream release 10.0.25. Includes fixes for the following
++ security vulnerabilities (Closes: #823325):
++ - CVE-2016-0666
++ - CVE-2016-0655
++ - CVE-2016-0648
++ - CVE-2016-0647
++ - CVE-2016-0643
++ - CVE-2016-5444
++ - CVE-2016-3459
++ - CVE-2016-3452
++ * Updated old changelog entries to include new CVE identifiers.
++ * Upstream included changes to logrotate script that supports systems that
++ has multiple mysqld processes running (Closes: #810968).
++ * Updated Dutch translation by Frans Spiesschaert (Closes: #822894).
++ * Updated Spanish translation by Javier Fernández-Sanguino Peña
++ (Closes: #823099).
++ * Updated Russian translation by Yuri Kozlov (Closes: #823422).
++ * Updated German translation by Chris Leick (Closes: #824487).
++ * Updated Brazilian Portuguese translation (Closes: #824644).
++ * Updated Turkish translation by Atila KOÇ (Closes: #825802).
++ * Add patch to provide passwordless root accounts for test suite.
++ * Updated Japanese translation by Takuma Yamada (Closes: #825813).
++
++ [ Vicențiu Ciorbaru ]
++ * Backport upstream MDEV-9479 fix: oqgraph fails to build with boost 1.60
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 30 May 2016 22:43:30 +0300
++
++mariadb-10.0 (10.0.24-7) unstable; urgency=low
++
++ * Temporarily remove mariadb-plugin-cassandra as Debian FTP bot thinks
++ it wasn't there before 10.0.24-6 and put the package in the NEW queue.
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 13 Apr 2016 13:24:28 +0300
++
++mariadb-10.0 (10.0.24-6) unstable; urgency=low
++
++ * Move mysql_embedded from client package to client-core package,
++ equally as is in mysql-client-core-5.6 and -5.7 (LP: #1568077).
++ * Add breaks/replaces for mariadb-client to accommodate the above.
++ * Add conflicts/breaks/replaces for MySQL 5.7 series packages now
++ when mysql-5.7 entered the Ubuntu repositories (LP: #1568285).
++ * Detect properly if there is an incompatible data directory from 5.7,
++ save it to another location and initialize a new data directory so that the
++ installation can complete properly without leaving dpkg in an inconsistent
++ state.
++ * Remove all old passwordless root account lines to close a potential
++ security vulnerability (LP: #1561062).
++
++ -- Otto Kekäläinen <otto@debian.org> Wed, 13 Apr 2016 10:56:10 +0300
++
++mariadb-10.0 (10.0.24-5) unstable; urgency=low
++
++ * Disable sporadically failing rpl_binlog_index test on PowerPC.
++ * Disable another sporadic on amd64 and update all Jira links.
++ * Fix typo in Mroonga prerm script.
++
++ -- Otto Kekäläinen <otto@debian.org> Sat, 12 Mar 2016 10:08:23 +0200
++
++mariadb-10.0 (10.0.24-4) unstable; urgency=low
++
++ * Update contributor documentation to match git-buildpackage version in sid.
++ * Add libxml and unixOBDC as build-depends for ConnectSE as done by in
++ upstream (Closes: #814944).
++ * Upload to via NEW as mariadb-10.0 was accidentally removed from Debian
++ unstable archives.
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 10 Mar 2016 18:40:51 +0200
++
++mariadb-10.0 (10.0.24-3) unstable; urgency=low
++
++ * Fix typo in rules file about Mroonga control section
++ * Add main.delayed test exception to more platforms
++ * Install mysql_embedded man page correctly
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 06 Mar 2016 22:20:52 +0200
++
++mariadb-10.0 (10.0.24-2) unstable; urgency=low
++
++ * Make new plugin packages breaks+replaces mariadb-server-10.0 as
++ the files used to reside there (Closes: #815377).
++ * Disable main.delayed that has been confirmed to be a false positive
++ caused by built platform resource limits.
++ * Disable multiple s390x tests that only fail on Ubuntu/Launchpad and
++ cannot be reproduced anywhere else.
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 04 Mar 2016 08:38:25 +0200
++
++mariadb-10.0 (10.0.24-1) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * New upstream release 10.0.24
++ - Drop auth_socket patches as MDEV-8375 was partially fixed upstream
++ - Refresh other patches
++ * New upstream release includes fixes for the following security
++ vulnerabilities:
++ - CVE-2016-0668
++ - CVE-2016-0650
++ - CVE-2016-0649
++ - CVE-2016-0646
++ - CVE-2016-0644
++ - CVE-2016-0641
++ - CVE-2016-0640
++ * Update filenames in d/copyright
++
++ [ Ian Gilfillan ]
++ * Add missing mysql_embedded man page
++
++ -- Otto Kekäläinen <otto@seravo.fi> Sat, 20 Feb 2016 14:23:50 +0200
++
++mariadb-10.0 (10.0.23-3) unstable; urgency=low
++
++ * Add Lintian overrides for TokuDB sources that indeed need autotools files
++ * Split TokuDB, Mroonga, Spider and Cassandra into their own packages and
++ start using new naming scheme 'mariadb-plugin-xzy' and rename existing
++ Connect and OQGraph packages accordingly (Closes: #773727)
++ * There is no need for mariadb-test packages to contain the version in the
++ package name, so remove it. It only makes sense to keep the version number
++ in the client and server packages, which users actually want to pin to.
++ * Update standards version
++
++ -- Otto Kekäläinen <otto@seravo.fi> Tue, 26 Jan 2016 11:34:48 +0200
++
++mariadb-10.0 (10.0.23-2) unstable; urgency=low
++
++ * Skip unstable Spider tests on Launchpad s390x builds
++ * Extend install lists with missing files after reviewing the list
++ of files produced by the build process
++ * Update server README.Debian to match current unix socekt authentication
++ * Lintian fixes and more updates to TokuDB plugin copyright paths
++ * Move mysql_upgrade to server core package so that Akonadi and similar
++ core package consumers can upgrade the database. Also update control file
++ with breaks/replaces to allow smooth upgrades (Closes: #793977).
++ * Update slow_query_log_file configuration syntax to match upstream's. Also
++ fixes #677222 in MariaDB packages.
++ * Rename and install Apport hook correctly
++ * Remove Taocrypt workaround fixed upstream long since #627208
++ * Removed CFLAGS and CXXFLAGS as suggested by Lars Tangvald and also done
++ in mysql-5.6 packaging commit id 16a64e810e28f1d0b66ede274cd4c2b1a425fecb
++ * Unmask the systemd mysql.service if left behind by a mysql-server-5.6
++ installation, otherwise the MariaDB service would remain masked too.
++ * Add gdb to build-deps as suggested in #627208 to get automatic stack traces
++ * Updated Turkish translation by Atila KOÇ (Closes: #811414)
++
++ -- Otto Kekäläinen <otto@seravo.fi> Sat, 23 Jan 2016 23:07:15 +0200
++
++mariadb-10.0 (10.0.23-1) unstable; urgency=low
++
++ * New upstream release 10.0.23. Includes fixes for the following
++ security vulnerabilities:
++ - CVE-2016-2047
++ - CVE-2016-0651
++ - CVE-2016-0642
++ - CVE-2016-0616
++ - CVE-2016-0609
++ - CVE-2016-0608
++ - CVE-2016-0606
++ - CVE-2016-0600
++ - CVE-2016-0598
++ - CVE-2016-0597
++ - CVE-2016-0596
++ - CVE-2016-0546
++ - CVE-2016-0505
++ * Ignore test suite exit code on unstable platforms (mips, mipsel)
++ * Update TokuDB plugin install and copyright paths to match latest
++ release done under Percona ownership
++
++ -- Otto Kekäläinen <otto@seravo.fi> Sun, 20 Dec 2015 14:18:33 +0200
++
++mariadb-10.0 (10.0.22-6) unstable; urgency=low
++
++ * Add patches to make passwordless root login default on all new
++ installs in all situations. Make auth_socket a built-in plugin.
++ * Clean up previous passwordless root implementation so that it
++ applies only to new installs and existing databases continue
++ to operate with the passwords defined in their user tables
++ * As disabled.def intrepreted test names in a special way, switch
++ back to using --skip-test-list option
++ * Make the watch file to make it better suited for the
++ git-buildpackage workflow and remove call to uupdate
++
++ -- Otto Kekäläinen <otto@seravo.fi> Sat, 19 Dec 2015 22:28:23 +0200
++
++mariadb-10.0 (10.0.22-5) unstable; urgency=low
++
++ * Fix non-working path of unstable-test in d/rules
++ * Add unstable test for amd64 to fix reproducible builds
++
++ -- Otto Kekäläinen <otto@seravo.fi> Thu, 17 Dec 2015 13:31:56 +0200
++
++mariadb-10.0 (10.0.22-4) unstable; urgency=low
++
++ * Upload to unstable
++
++ -- Otto Kekäläinen <otto@seravo.fi> Mon, 14 Dec 2015 00:49:14 +0200
++
++mariadb-10.0 (10.0.22-4~exp1) experimental; urgency=low
++
++ * Rewrite unstable tests section in d/rules that was not working
++
++ -- Otto Kekäläinen <otto@seravo.fi> Sun, 13 Dec 2015 21:36:48 +0200
++
++mariadb-10.0 (10.0.22-3) unstable; urgency=low
++
++ * Fix typo in d/rules
++ * Extend list of unstable tests for arch mips, mipsel64 and alpha
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 11 Dec 2015 21:57:23 +0200
++
++mariadb-10.0 (10.0.22-2) unstable; urgency=low
++
++ * Escape d/rules file correctly to avoid parse error.
++ * Remove patches/os_sync_Free patch that is not intended for production use.
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 20 Nov 2015 23:11:09 +0200
++
++mariadb-10.0 (10.0.22-2~exp2) experimental; urgency=low
++
++ [ Alexander Barkov ]
++ * Backport patch from upstream to fix MDEV-9091: mysqld crashes on shutdown
++ after running TokuDB tests on Ubuntu
++ * Backport patch from upstream to fix MDEV-8692: prefschema test failures
++
++ [ Otto Kekäläinen ]
++ * Replace old 'make test' structure with direct call on mysql-test-run and
++ parallelize the test suite run in the Debian build.
++ * Print in build log env info to help debug builds on different platforms.
++ * Keep a list of unstable tests that are to be skipped on official builds.
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 13 Nov 2015 22:08:49 +0200
++
++mariadb-10.0 (10.0.22-2~exp1) experimental; urgency=low
++
++ * Add diagnostics to find out the problem in os_sync_free()
++ * Backport fix for TokuDB crashes in build tests on Launchpad
++ and enable TokuDB builds
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 13 Nov 2015 08:54:05 +0200
++
++mariadb-10.0 (10.0.22-1) unstable; urgency=low
++
++ [ Otto Kekäläinen ]
++ * New upstream release. Includes fixes for the following security
++ vulnerabilities (Closes: #802874):
++ - CVE-2016-0610
++ - CVE-2016-3471
++ - CVE-2015-7744
++ - CVE-2015-4802
++ - CVE-2015-4807
++ - CVE-2015-4815
++ - CVE-2015-4826
++ - CVE-2015-4830
++ - CVE-2015-4836
++ - CVE-2015-4858
++ - CVE-2015-4861
++ - CVE-2015-4870
++ - CVE-2015-4913
++ - CVE-2015-4792
++ * New release includes updated man pages (Closes: #779992)
++ * Update the most recent patches with proper DEP-3 compliant headers
++ * Add CVE IDs to previous changelog entries
++
++ [ Jean Weisbuch ]
++ * Update mysqlreport to version 4.0
++
++ [ Otto Kekäläinen ]
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 30 Oct 2015 11:42:30 +0200
++
++mariadb-10.0 (10.0.21-3) unstable; urgency=low
++
++ * Updated Brazilian Portuguese translation (Closes: #798048)
++ * Upload 10.0.21 and all changes tested initially in experimental
++ to unstable. Now sensible as mysql-5.6 has entered testing.
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 18 Sep 2015 23:04:53 +0300
++
++mariadb-10.0 (10.0.21-2) experimental; urgency=low
++
++ * Update gdb.conf to have tags signed by default
++ * Add CVE IDs to previous changelog entries
++ * Pass DEB_BUILD_ARCH to CMake options to enhance buils on some platforms
++ * Test suite failures are now fatal on all platforms and not ignored anywhere
++ * Revert most of commit 579282f and re-enable Mroonga
++
++ -- Otto Kekäläinen <otto@seravo.fi> Wed, 26 Aug 2015 18:20:54 +0300
++
++mariadb-10.0 (10.0.21-1) experimental; urgency=low
++
++ [ Otto Kekäläinen ]
++ * Created libmariadbd18 and moved .so file from libmariadbd-dev there
++ * Reproducible build improvement: Add LC_ALL=C to mysql.sym sort command
++ * New upstream release.
++ - Upstream added skip_log_error to mysqld_safe config (Closes: #781945)
++ - Diffie-Helman modulus increased to 2048-bits (Closes: #788905)
++ * New upstream release fixes the following security vulnerabilities:
++ - CVE-2015-4816
++ - CVE-2015-4819
++ - CVE-2015-4879
++ - CVE-2015-4895
++ * Split mariadb-test-data-10.0 out of the main test package. This will save
++ disk space in Debian archives as the arch independent data files are
++ in one single package that can be used on all platforms and the package
++ that is built on multiple platform shrinks significantly.
++
++ [ Jean Weisbuch ]
++ * The MYCHECK_RCPT variable can now be set from the default file.
++ * The check_for_crashed_tables() function on the debian-start script has been
++ fixed to be able to log (and email) the errors it encountered : Errors are
++ sent to stderr by the CLI while only stdout was captured by the function.
++ * The same function now also checks Aria tables along with MyISAM ones.
++
++ -- Otto Kekäläinen <otto@seravo.fi> Thu, 13 Aug 2015 10:08:38 +0200
++
++mariadb-10.0 (10.0.20-3) unstable; urgency=medium
++
++ [ Andreas Beckmann ]
++ * mariadb-common: Depend on a version of mysql-common that ships
++ /usr/share/mysql-common/configure-symlinks. (Closes: #787533)
++ * mariadb-common.postinst: Drop fallback my.cnf symlink management.
++ * mariadb-common.preinst: Clean up my.cnf/my.cnf.old from the fallback.
++
++ [ Otto Kekäläinen ]
++ * Clean up old cruft from rules file after review by Sergei Golubchik
++ * Unified config file layout with upstream .cnf layout
++ * Recover mysql-upgrade dir/link handlig wrongly removed in f7caa041db
++ * Minor Lintian and documentation fixes
++ * Switch 'nm -n' to 'nm --defined-only' to improve reproducible builds
++
++ [ Olaf van der Spek ]
++ * Minor spell checking (Closes: #792123)
++
++ [ Israel Tsadok ]
++ * Fix mariadb-server-10.0.preinst script that failed to save a new
++ /var/lib/mysql-upgrade/DATADIR.link if a previous DATADIR.link existed and
++ the /var/lib/mysql directory was a symbolic link with an absolute path
++ as target (Closes: #792918)
++
++ [ Jean Weisbuch ]
++ * Added a Debian default file for the mariadb-server-10.0 package which allows
++ one to set the MYSQLD_STARTUP_TIMEOUT variable used in the init script
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 24 Jul 2015 23:00:00 +0300
++
++mariadb-10.0 (10.0.20-2) unstable; urgency=low
++
++ * Fix bash test logic in postinstall (Closes: #789589)
++ * Add extra sort in d/rules mysqld.sym.gz command to satisfy Debian
++ reproducible build requirements
++ * Switch to utf8mb4 as default character set
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 03 Jul 2015 17:11:01 +0300
++
++mariadb-10.0 (10.0.20-1) unstable; urgency=low
++
++ * New upstream release. Includes fixes for the following security
++ vulnerabilities:
++ - CVE-2015-2582
++ - CVE-2015-2620
++ - CVE-2015-2643
++ - CVE-2015-2648
++ - CVE-2015-3152: Client command line option --ssl-verify-server-cert (and
++ MYSQL_OPT_SSL_VERIFY_SERVER_CERT option of the client API) when used
++ together with --ssl will ensure that the established connection is
++ SSL-encrypted and the MariaDB server has a valid certificate.
++ - CVE-2015-4752
++ - CVE-2015-4864
++ * New release includes fix for memory corruption on arm64 (Closes: #787221)
++ * Added patch to enhance build reproducibility regarding the file INFO_BIN
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 19 Jun 2015 13:01:56 +0300
++
++mariadb-10.0 (10.0.19-1) unstable; urgency=low
++
++ * New upstream release. Fixed the server crash caused by mysql_upgrade
++ (MDEV-8115).
++ * Upload to unstable from master branch as Jessie is not released.
++
++ -- Otto Kekäläinen <otto@seravo.fi> Sat, 09 May 2015 22:24:03 +0300
++
++mariadb-10.0 (10.0.18-1~exp1) experimental; urgency=low
++
++ * New upstream release. Includes fixes for the following security
++ vulnerabilities:
++ - CVE-2015-4866
++ - CVE-2014-8964 bundled PCRE contained heap-based buffer overflow
++ vulnerability that allowed the server to crash or have other unspecified
++ impact via a crafted regular expression made possible with the
++ REGEXP_SUBSTR function (MDEV-8006).
++ - CVE-2015-0501
++ - CVE-2015-2571
++ - CVE-2015-0505
++ - CVE-2015-0499
++ - CVE-2015-4757
++ - CVE-2015-4866
++ * Cleanup in d/copyright
++ * Make the mariadb-common depends versioned to guarantee that latest
++ config files are installed
++
++ -- Otto Kekäläinen <otto@seravo.fi> Thu, 07 May 2015 23:21:20 +0300
++
++mariadb-10.0 (10.0.17-1~exp2) experimental; urgency=low
++
++ * d/control: Related to innochecksum manpage move, also break/replace
++ the mysql-client-5.5/6 packages (Closes: #779873)
++ * Add automatic fallback to the new /etc/mysql/my.cnf management scheme
++ for cases where mysql-common/configure-symlinks is not yet available
++ and users complain the installation ends up broken.
++ * New release confirmed to build with GCC-5 (Closes: #777996)
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 06 Mar 2015 16:42:21 +0200
++
++mariadb-10.0 (10.0.17-1~exp1) experimental; urgency=low
++
++ [ Jan Wagner ]
++ * Adding mysqld_multi.server_lsb-header.patch, provides LSB headers for
++ example initscript (Closes: #778762)
++ * Adding mysqld_multi_confd.patch, makes mysqld_multi reading conf.d
++ (Closes: #778761)
++
++ [ Robie Basak ]
++ * Move innochecksum back to mariadb-server-core-10.0 to align with other
++ variants (LP: #1421520).
++ * Fix typo in mariadb-server-10.0.postinst.
++ * Fix typo in postinst mktemp call (LP: #1420831).
++
++ [ Arnaud Fontaine ]
++ * d/control: innochecksum manpage has been moved to mariadb-client-10.0 in
++ 10.0.13-1 (ba97056), thus add Breaks/Replaces in mariadb-client-10.0
++ against mariadb-server-10.0 << 10.0.13-1~.
++
++ [ Otto Kekäläinen ]
++ * Follow to new /etc/mysql/my.cnf management scheme
++ * Remove the my.cnf move command as it increases complexity too much and might
++ emit an error code if mariadb-common is upgraded before mysql-common is.
++ * Add patch to enhance build reproducibility
++ * Remove /var/log/mysql.log from logrotate. Everything should be inside
++ the mysql directory (/var/log/mysql/) and not directly on plain /var/log
++ * New upstream release. Includes fixes for the following security
++ vulnerabilities (changelog updated post release):
++ - CVE-2015-2568
++ - CVE-2015-2573
++ - CVE-2015-0433
++ - CVE-2015-0441
++
++ -- Otto Kekäläinen <otto@seravo.fi> Mon, 02 Mar 2015 20:01:13 +0200
++
++mariadb-10.0 (10.0.16-1~exp3) experimental; urgency=low
++
++ * Update the mail.ssl test to match new cacert.pem
++ * Stop asking and setting a database root user password. Instead enable
++ the auth_socket plugin and let unix user root access MariaDB without
++ a separate password. Admins using sudo or cron scripts can use the
++ same access too, and there is no debian-sys-maint password either anymore.
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 30 Jan 2015 18:52:55 +0200
++
++mariadb-10.0 (10.0.16-1~exp2) experimental; urgency=low
++
++ * Fix typo in preinstall script (Closes: #776494).
++ * Backported new cacert.pem etc from 5.5 the replace the expired ones.
++
++ -- Otto Kekäläinen <otto@seravo.fi> Wed, 28 Jan 2015 20:57:23 +0200
++
++mariadb-10.0 (10.0.16-1~exp1) experimental; urgency=low
++
++ * New upstream release. Includes fixes for the following security
++ vulnerabilities:
++ - CVE-2015-0411
++ - CVE-2015-0382
++ - CVE-2015-0381
++ - CVE-2015-0432
++ - CVE-2014-6568
++ - CVE-2015-0374
++
++ -- Otto Kekäläinen <otto@seravo.fi> Tue, 27 Jan 2015 17:04:21 +0200
++
++mariadb-10.0 (10.0.15-2~exp1) experimental; urgency=low
++
++ * Fix mariadb-server-10.0.postinst so that the flag removal will not emit
++ an error code if there are no previous debian-*.flag files. This will
++ fix a dpkg issue caught by piuparts testing.
++ * Increase the debconf downgrade warning dialog priority to critical to make
++ sure all users see it and understand why their system broke after downgrade.
++ * Attempt to fix FTBFS on mips, mipsel, powerpc introduced by upstream
++ release 10.0.15 (Closes: #772964).
++
++ -- Otto Kekäläinen <otto@seravo.fi> Fri, 12 Dec 2014 14:07:50 +0200
++
++mariadb-10.0 (10.0.15-1) unstable; urgency=low
++
++ [ Arnaud Fontaine ]
++ * Bump libpcre3-dev Build-Depends to >= 2:8.35-3.2~ (Closes: #767903).
++
++ [ Otto Kekäläinen }
++ * New upstream release, includes fixes for the following security issues:
++ - CVE-2014-6507
++ - CVE-2014-6491
++ - CVE-2014-6500
++ - CVE-2014-6469
++ - CVE-2014-6555
++ - CVE-2014-6559
++ - CVE-2014-6494
++ - CVE-2014-6496
++ - CVE-2014-6464
++ * Disable on non-amd64 platforms the new Mroonga storage engine which
++ was introduced in the new upstream release.
++ * Allow mariadb-server-10.0 to overwrite file man1/mysql_plugin.1.gz in
++ mysql-client-5.5 with breaks and replaces (Closes: #771213).
++ * Clean up old debian-*.flag files from datadir to avoid unexpected
++ behavior at later upgrades (Closes: #770177).
++
++ -- Otto Kekäläinen <otto@seravo.fi> Tue, 25 Nov 2014 21:45:43 +0200
++
++mariadb-10.0 (10.0.14-4) unstable; urgency=low
++
++ * Updated patch d/username-in-tests-replace.patch to fix the
++ obfuscation done by anti-spam measures in the MariaDB
++ commit message view (Closes: #769865).
++ * Unified indentantion to two spaces in init file for easier
++ debugging of #609537
++
++ -- Otto Kekäläinen <otto@seravo.fi> Mon, 17 Nov 2014 11:45:11 +0200
++
++mariadb-10.0 (10.0.14-3) unstable; urgency=low
++
++ * Added patch d/username-in-tests-replace.patch to fix
++ test failure (Closes: #769212).
++ * Added versioned dependency on libpcre3 (Closes: #767903).
++
++ -- Otto Kekäläinen <otto@seravo.fi> Wed, 12 Nov 2014 15:00:11 +0300
++
++mariadb-10.0 (10.0.14-2) unstable; urgency=low
++
++ [ Tobias Frost ]
++ * Fix two lintian warnings in d/copyright (missing "-" between GPL and 2)
++ * Always be verbose when building the package and show compiler args
++
++ [ Otto Kekäläinen ]
++ * Upload to unstable
++ * Updated German translation by Chris Leick and Holger Wansing
++ (Closes: #763952)
++ * Updated Dutch translation by Frans Spiesschaert (Closes: #764013)
++ * Removed libssl-dev from build dependencies in favour of using
++ bundled YaSSL instead (Closes: #761911)
++ * Fixed debconf value saving (Closes: #761452)
++ * Re-enabled TokuDB after backporting upstream fix in MDEV-6815
++ * Removed libmariadbclient packages that provided the Debian-only
++ libmariadbclient.so library that nobody used. Instead developers are
++ encouraged to use the libraries from the package libmariadb-client-lgpl
++ instead (Closes: #739452) (Closes: #742172).
++
++ -- Otto Kekäläinen <otto@seravo.fi> Sat, 18 Oct 2014 19:00:11 +0300
++
++mariadb-10.0 (10.0.14-1) experimental; urgency=low
++
++ * New upstream release. (Closes: #757026)
++ * d/control: Removed Provides: libmysqlclient-dev (Closes: #759309)
++ * d/control: Removed Provides: libmysqld-dev with same motivation
++ * Updated Swedish translation by Martin Bagge
++ and Anders Jonsson (Closes: #762795)
++ * Updated Spanish translation by Javier Fernandez-Sanguino (Closes: #762751)
++ * Updated Portuguese translation by Miguel Figueiredo (Closes: #763194)
++ * Updated Czech translation by Miroslav Kure (Closes: #763309)
++
++ -- Otto Kekäläinen <otto@seravo.fi> Thu, 28 Aug 2014 00:39:02 +0300
++
++mariadb-10.0 (10.0.10-1) experimental; urgency=low
++
++ * Initial Upload (Closes: #740473)
++
++ -- Otto Kekäläinen <otto@seravo.fi> Tue, 01 Apr 2014 09:56:38 +0300
--- /dev/null
- Priority: optional
- Maintainer: MariaDB Developers <developers@lists.mariadb.org>
- Build-Depends: bison,
- cmake,
- cracklib-runtime <!nocheck>,
- debhelper (>= 11),
- default-jdk,
- dh-exec,
- dh-package-notes,
- flex [amd64 arm64],
- gdb <!nocheck>,
- libaio-dev [linux-any],
- libboost-atomic-dev [amd64 arm64],
- libboost-chrono-dev [amd64 arm64],
- libboost-date-time-dev [amd64 arm64],
- libboost-dev,
- libboost-filesystem-dev [amd64 arm64],
- libboost-regex-dev [amd64 arm64],
- libboost-system-dev [amd64 arm64],
- libboost-thread-dev [amd64 arm64],
- libbz2-dev,
- libcrack2-dev (>= 2.9.0),
- libcurl4-openssl-dev | libcurl4-dev,
- libedit-dev,
- libedit-dev:native,
- libfmt-dev (>= 7.0.0),
- libjemalloc-dev [linux-any],
- libjudy-dev,
- libkrb5-dev,
- liblz4-dev,
- liblzma-dev,
- liblzo2-dev,
- libncurses-dev,
- libnuma-dev [linux-any],
- libpam0g-dev,
- libpcre2-dev,
- libsnappy-dev,
- libssl-dev,
- libssl-dev:native,
- libsystemd-dev [linux-any],
- liburing-dev [linux-any],
- libxml2-dev,
- libzstd-dev (>= 1.1.3),
- lsb-release,
- perl:any,
- po-debconf,
- psmisc,
- unixodbc-dev,
- uuid-dev,
- zlib1g-dev (>= 1:1.1.3-5~)
- Rules-Requires-Root: no
- Standards-Version: 4.5.0
+Source: mariadb
+Section: database
- Vcs-Browser: https://github.com/MariaDB/server/
- Vcs-Git: https://github.com/MariaDB/server.git
++Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
++Uploaders:
++ Otto Kekäläinen <otto@debian.org>,
++Build-Depends:
++ debhelper-compat (= 13),
++ dh-apparmor,
++ dh-exec,
++ dh-package-notes,
++ dpkg-dev (>= 1.22.5),
++ bison,
++ cmake,
++ cracklib-runtime <!nocheck>,
++ default-jdk,
++ gdb <!nocheck>,
++ libaio-dev [linux-any],
++ libboost-dev,
++ libbz2-dev,
++ libcrack2-dev (>= 2.9.0),
++ libcrypt-dev,
++ libcurl4-openssl-dev | libcurl4-dev,
++ libedit-dev,
++ libedit-dev:native,
++ libfmt-dev (>= 10.1.1+ds1-4) | libfmt-dev (<< 10),
++ libjemalloc-dev [linux-any],
++ libjudy-dev,
++ libkrb5-dev,
++ liblz4-dev,
++ liblzma-dev,
++ liblzo2-dev,
++ libncurses-dev,
++ libnet-ssleay-perl <!nocheck>,
++ libnuma-dev [linux-any],
++ libpam0g-dev,
++ libpcre2-dev,
++ libsnappy-dev,
++ libssl-dev,
++ libssl-dev:native,
++ libsystemd-dev [linux-any],
++ liburing-dev [linux-any],
++ libxml2-dev,
++ libzstd-dev (>= 1.3.3),
++ lsb-release,
++ perl:any,
++ po-debconf,
++ psmisc,
++ unixodbc-dev,
++ uuid-dev,
++ zlib1g-dev (>= 1:1.1.3-5~),
++ zlib1g-dev:native,
++Standards-Version: 4.7.3
+Homepage: https://mariadb.org/
- Depends: libmariadb3 (= ${binary:Version}),
- libssl-dev,
- zlib1g-dev,
- ${misc:Depends},
- ${shlibs:Depends}
- Conflicts: libmariadb-dev-compat (<< 3.0.0),
- libmariadbclient-dev,
- libmariadbclient16-dev
- Provides: libmariadbclient-dev
- Breaks: libmariadb-client-lgpl-dev,
- libmysqlclient-dev (<< ${source:Version}),
- libmysqld-dev (<< ${source:Version})
- Replaces: libmariadb-client-lgpl-dev,
- libmariadb-dev-compat (<< 3.0.0),
- libmariadbclient-dev,
- libmysqlclient-dev (<< ${source:Version}),
- libmysqld-dev (<< ${source:Version})
++Vcs-Browser: https://salsa.debian.org/mariadb-team/mariadb-server
++Vcs-Git: https://salsa.debian.org/mariadb-team/mariadb-server.git
+
+Package: libmariadb-dev
+Architecture: any
+Section: libdevel
- Depends: libmariadb-dev (= ${binary:Version}),
- ${misc:Depends}
- Conflicts: libmariadb-client-lgpl-dev,
- libmariadb-client-lgpl-dev-compat,
- libmariadbclient-dev (<< ${source:Version}),
- libmariadbclient-dev-compat,
- libmysqlclient-dev,
- libmysqlclient10-dev,
- libmysqlclient12-dev,
- libmysqlclient14-dev,
- libmysqlclient15-dev,
- libmysqlclient16-dev
- Provides: libmariadb-client-lgpl-dev-compat,
- libmariadbclient-dev-compat,
- libmysqlclient-dev
- Breaks: libmariadb-dev (<< ${source:Version})
- Replaces: libmariadb-client-lgpl-dev,
- libmariadb-client-lgpl-dev-compat,
- libmariadb-dev (<< ${source:Version}),
- libmariadbclient-dev (<< ${source:Version}),
- libmariadbclient-dev-compat,
- libmysqlclient-dev
++Depends:
++ libmariadb3 (= ${binary:Version}),
++ libssl-dev,
++ zlib1g-dev,
++ ${misc:Depends},
++ ${shlibs:Depends},
++Breaks:
++ libmariadb-client-lgpl-dev,
++ libmariadb-dev-compat (<< ${source:Version}),
++ libmariadbclient-dev (<< 1:10.3),
++ libmysqlclient-dev,
++ libmysqld-dev (<< ${source:Version}),
++Replaces:
++ libmariadb-client-lgpl-dev,
++ libmariadb-dev-compat (<< ${source:Version}),
++ libmariadbclient-dev (<< 1:10.3),
++ libmysqlclient-dev,
++ libmysqld-dev (<< ${source:Version}),
++Conflicts:
++ libmariadbclient16-dev,
++ libmysqlclient-dev,
+Description: MariaDB database development files
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package includes development libraries and header files to allow sources
+ expecting the MariaDB Connector/C to build. Sources that expect the MySQL
+ client libraries should use files from the libmariadb-dev-compat package.
+
+Package: libmariadb-dev-compat
+Architecture: any
+Section: libdevel
- Depends: mariadb-common,
- ${misc:Depends},
- ${shlibs:Depends}
- Conflicts: libmariadbclient18 (<< 10.2.0),
- mariadb-galera-server-10.0,
- mariadb-galera-server-5.5,
- mariadb-server-10.0,
- mariadb-server-5.1,
- mariadb-server-5.2,
- mariadb-server-5.3,
- mariadb-server-5.5
- Breaks: libmariadbclient18 (<< ${source:Version})
- Replaces: libmariadbclient18 (<< ${source:Version})
++Depends:
++ libmariadb-dev (= ${binary:Version}),
++ ${misc:Depends},
++Conflicts:
++ libmariadb-client-lgpl-dev-compat,
++ libmariadbclient-dev-compat,
++ libmysqlclient-dev,
++Provides:
++ libmariadb-client-lgpl-dev-compat,
++ libmariadbclient-dev-compat,
++Breaks:
++ libmariadb-client-lgpl-dev-compat,
++ libmariadbclient-dev (<< 1:10.3),
++ libmariadbclient-dev-compat,
++ libmysqlclient-dev,
++Replaces:
++ libmariadb-client-lgpl-dev-compat,
++ libmariadbclient-dev (<< 1:10.3),
++ libmariadbclient-dev-compat,
++ libmysqlclient-dev,
+Description: MariaDB Connector/C, compatibility symlinks
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package includes compatibility symlinks to allow sources expecting the
+ MySQL client libraries to be built against MariaDB Connector/C.
+
+Package: libmariadb3
+Architecture: any
+Multi-Arch: same
+Section: libs
- Package: libmariadb3-compat
++Depends:
++ mariadb-common,
++ ${misc:Depends},
++ ${shlibs:Depends},
++Conflicts:
++ mariadb-galera-server-10.0,
++ mariadb-galera-server-5.5,
++ mariadb-server-10.0,
++ mariadb-server-5.1,
++ mariadb-server-5.2,
++ mariadb-server-5.3,
++ mariadb-server-5.5,
++Breaks:
++ libmariadbclient18,
++Replaces:
++ libmariadbclient18,
+Description: MariaDB database client library
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package includes the client library.
+
- Depends: libmariadb3,
- mariadb-common,
- ${misc:Depends}
- Breaks: libmysqlclient19,
- libmysqlclient20,
- libmysqlclient21
- Replaces: libmysqlclient19,
- libmysqlclient20,
- libmysqlclient21
- Provides: libmysqlclient19,
- libmysqlclient20,
- libmysqlclient21
- Description: MariaDB database client library MySQL compat package
- MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
- server. SQL (Structured Query Language) is the most popular database query
- language in the world. The main goals of MariaDB are speed, robustness and
- ease of use.
- .
- This package includes the client runtime libraries that simulate and replace
- the equivalents found in MySQL 5.6, 5.7 and 8.0 (mysqlclient19, 20 and 21).
-
- Package: libmariadbclient18
- Section: libs
- Architecture: any
- Depends: libmariadb3 (= ${binary:Version}),
- ${misc:Depends}
- Replaces: libmariadbclient18
- Provides: libmariadbclient18
- Description: Virtual package to satisfy external libmariadbclient18 depends
- MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
- server. SQL (Structured Query Language) is the most popular database query
- language in the world. The main goals of MariaDB are speed, robustness and
- ease of use.
- .
- This package provides compatibility symlinks for binaries that expect to find
- libmariadbclient.so.18 will automatically use libmariadb.so.3 instead.
-
- Package: libmysqlclient18
- Section: libs
- Architecture: any
- Depends: libmariadb3 (= ${binary:Version}),
- ${misc:Depends}
- Replaces: libmysqlclient18
- Provides: libmysqlclient18
- Description: Virtual package to satisfy external libmysqlclient18 depends
- MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
- server. SQL (Structured Query Language) is the most popular database query
- language in the world. The main goals of MariaDB are speed, robustness and
- ease of use.
- .
- This package provides compatibility symlinks for binaries that expect to find
- libmysqlclient.so.18 will automatically use libmariadb.so.3 instead.
-
- Package: libmariadbd19
- Architecture: any
- Section: libs
- Depends: ${misc:Depends},
- ${shlibs:Depends}
- Breaks: libmariadbd-dev (<< ${source:Version})
- Conflicts: libmariadbd19t64
- Replaces: libmariadbd-dev (<< ${source:Version})
++Package: libmariadbd19t64
++Provides:
++ ${t64:Provides},
++Replaces:
++ libmariadbd19,
++Breaks:
++ libmariadbd19 (<< ${source:Version}),
+Architecture: any
+Section: libs
- Provides: libmysqld-dev
- Pre-Depends: ${misc:Pre-Depends}
- Depends: libmariadb-dev (= ${binary:Version}),
- libmariadbd19 (= ${binary:Version}),
- ${misc:Depends}
- Breaks: libmariadb-dev (<< ${source:Version}),
- libmariadbclient-dev (<< ${source:Version}),
- libmysqld-dev
- Replaces: libmariadb-dev (<< ${source:Version}),
- libmariadbclient-dev (<< ${source:Version}),
- libmysqld-dev
++Depends:
++ ${misc:Depends},
++ ${shlibs:Depends},
+Multi-Arch: same
+Description: MariaDB embedded database, shared library
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package includes a shared library for embedded MariaDB applications.
+
+Package: libmariadbd-dev
+Architecture: any
+Section: libdevel
- This package includes the MariaDB embedded server library development
- and header files.
-
- Package: mysql-common
- Architecture: all
- Depends: ${misc:Depends}
- Description: MariaDB client common configuration files package (e.g. /etc/mysql/my.cnf)
- MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
- server. SQL (Structured Query Language) is the most popular database query
- language in the world. The main goals of MariaDB are speed, robustness and
- ease of use.
- .
- This package includes files needed by all versions of the client library
- (e.g. /etc/mysql/my.cnf).
++Provides:
++ libmysqld-dev,
++Pre-Depends:
++ ${misc:Pre-Depends},
++Depends:
++ libmariadb-dev (= ${binary:Version}),
++ libmariadbd19t64 (= ${binary:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
++Breaks:
++ libmariadb-dev (<< 1:10.4),
++ libmysqld-dev,
++Replaces:
++ libmariadb-dev (<< 1:10.4),
++ libmysqld-dev,
+Description: MariaDB embedded database, development files package
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
- Depends: mysql-common (>= 5.6.25),
- ${misc:Depends}
++ This package includes the MariaDB embedded server library development and
++ header files.
+
+Package: mariadb-common
+Architecture: all
- Description: MariaDB database common files (e.g. /etc/mysql/mariadb.conf.d/)
++Depends:
++ mysql-common (>= 5.6.25),
++ ${misc:Depends},
+Multi-Arch: foreign
- Depends: libmariadb3 (>= 10.5.4),
- mariadb-common (>= ${source:Version}),
- ${misc:Depends},
- ${shlibs:Depends}
- Conflicts: mariadb-client-10.0,
- mariadb-client-10.1,
- mariadb-client-10.2,
- mariadb-client-10.3,
- mariadb-client-10.4,
- mariadb-client-10.5,
- mariadb-client-10.6,
- mariadb-client-10.7,
- mariadb-client-10.8,
- mariadb-client-5.1,
- mariadb-client-5.2,
- mariadb-client-5.3,
- mariadb-client-5.5,
- mariadb-client-core-10.0,
- mariadb-client-core-10.1,
- mariadb-client-core-10.2,
- mariadb-client-core-10.3,
- mariadb-client-core-10.4,
- mariadb-client-core-10.5,
- mariadb-client-core-10.6,
- mariadb-client-core-10.7,
- mariadb-client-core-10.8,
- mariadb-client-core-5.1,
- mariadb-client-core-5.2,
- mariadb-client-core-5.3,
- mariadb-client-core-5.5,
- mysql-client (<< 5.0.51),
- mysql-client-5.0,
- mysql-client-5.1,
- mysql-client-5.5,
- mysql-client-core-5.1,
- mysql-client-core-5.5,
- mysql-client-core-5.6,
- mysql-client-core-5.7,
- mysql-client-core-8.0,
- virtual-mysql-client-core
- Breaks: mariadb-client (<< ${source:Version}),
- mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-core (<< ${source:Version}),
- mariadb-server-core-10.0,
- mariadb-server-core-10.1,
- mariadb-server-core-10.2,
- mariadb-server-core-10.3,
- mariadb-server-core-10.4,
- mariadb-server-core-10.5,
- mariadb-server-core-10.6,
- mariadb-server-core-10.7,
- mariadb-server-core-10.8,
- mysql-cluster-community-client-plugins,
- mysql-server-core-5.5,
- mysql-server-core-5.6,
- mysql-server-core-5.7,
- mysql-server-core-8.0,
- percona-server-server-5.6,
- percona-server-server-5.7,
- percona-server-server-8.0,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7,
- percona-xtradb-cluster-server-8.0
- Replaces: mariadb-client (<< ${source:Version}),
- mariadb-client-10.0,
- mariadb-client-10.1,
- mariadb-client-10.2,
- mariadb-client-10.3,
- mariadb-client-10.4,
- mariadb-client-10.5,
- mariadb-client-10.6,
- mariadb-client-10.7,
- mariadb-client-10.8,
- mariadb-client-5.1,
- mariadb-client-5.2,
- mariadb-client-5.3,
- mariadb-client-5.5,
- mariadb-client-core-10.0,
- mariadb-client-core-10.1,
- mariadb-client-core-10.2,
- mariadb-client-core-10.3,
- mariadb-client-core-10.4,
- mariadb-client-core-10.5,
- mariadb-client-core-10.6,
- mariadb-client-core-10.7,
- mariadb-client-core-10.8,
- mariadb-client-core-5.1,
- mariadb-client-core-5.2,
- mariadb-client-core-5.3,
- mariadb-client-core-5.5,
- mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-core (<< ${source:Version}),
- mariadb-server-core-10.0,
- mariadb-server-core-10.1,
- mariadb-server-core-10.2,
- mariadb-server-core-10.3,
- mariadb-server-core-10.4,
- mariadb-server-core-10.5,
- mariadb-server-core-10.6,
- mariadb-server-core-10.7,
- mariadb-server-core-10.8,
- mysql-client (<< 5.0.51),
- mysql-client-5.0,
- mysql-client-5.1,
- mysql-client-5.5,
- mysql-client-core-5.1,
- mysql-client-core-5.5,
- mysql-client-core-5.6,
- mysql-client-core-5.7,
- mysql-client-core-8.0,
- mysql-cluster-community-client-plugins,
- mysql-server-core-5.5,
- mysql-server-core-5.6,
- mysql-server-core-5.7,
- mysql-server-core-8.0,
- percona-server-server-5.6,
- percona-server-server-5.7,
- percona-server-server-8.0,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7,
- percona-xtradb-cluster-server-8.0,
- virtual-mysql-client-core
- Provides: default-mysql-client-core,
- virtual-mysql-client-core
++Description: MariaDB database common files (/etc/mysql/mariadb.conf.d/)
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package includes configuration files common to all MariaDB programs.
+
+Package: mariadb-client-core
+Architecture: any
- Depends: debianutils (>=1.6),
- libconfig-inifiles-perl,
- mariadb-client-core (>= ${source:Version}),
- mariadb-common,
- ${misc:Depends},
- ${perl:Depends},
- ${shlibs:Depends}
- Conflicts: mariadb-client-10.0,
- mariadb-client-10.1,
- mariadb-client-10.2,
- mariadb-client-10.3,
- mariadb-client-10.4,
- mariadb-client-10.5,
- mariadb-client-10.6,
- mariadb-client-10.7,
- mariadb-client-10.8,
- mariadb-client-5.1,
- mariadb-client-5.2,
- mariadb-client-5.3,
- mariadb-client-5.5,
- mysql-client (<< 5.0.51),
- mysql-client-5.0,
- mysql-client-5.1,
- mysql-client-5.5,
- mysql-client-5.6,
- mysql-client-5.7,
- mysql-client-8.0,
- mysql-client-core-5.0,
- mysql-client-core-5.1,
- mysql-client-core-5.5,
- mysql-client-core-5.6,
- mysql-client-core-5.7,
- mysql-client-core-8.0,
- mytop,
- virtual-mysql-client
- Breaks: mariadb-client-core (<< ${source:Version}),
- mariadb-client-core-10.0,
- mariadb-client-core-10.1,
- mariadb-client-core-10.2,
- mariadb-client-core-10.3,
- mariadb-client-core-10.4,
- mariadb-client-core-10.5,
- mariadb-client-core-10.6,
- mariadb-client-core-10.7,
- mariadb-client-core-10.8,
- mariadb-server (<< ${source:Version}),
- mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4,
- mariadb-server-10.5,
- mariadb-server-10.6,
- mariadb-server-10.7,
- mariadb-server-10.8,
- mariadb-server-core (<< ${source:Version}),
- mariadb-server-core-10.0,
- mariadb-server-core-10.1,
- mariadb-server-core-10.2,
- mariadb-server-core-10.3,
- mariadb-server-core-10.4,
- mariadb-server-core-10.5,
- mariadb-server-core-10.6,
- mariadb-server-core-10.7,
- mariadb-server-core-10.8,
- mysql-server-5.5,
- mysql-server-5.6,
- mysql-server-5.7,
- mysql-server-8.0,
- mysql-server-core-5.5,
- mysql-server-core-5.6,
- mysql-server-core-5.7,
- mysql-server-core-8.0,
- percona-server-server-5.6,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7
- Replaces: mariadb-client-10.0,
- mariadb-client-10.1,
- mariadb-client-10.2,
- mariadb-client-10.3,
- mariadb-client-10.4,
- mariadb-client-10.5,
- mariadb-client-10.6,
- mariadb-client-10.7,
- mariadb-client-10.8,
- mariadb-client-5.1,
- mariadb-client-5.2,
- mariadb-client-5.3,
- mariadb-client-5.5,
- mariadb-client-core (<< ${source:Version}),
- mariadb-client-core-10.0,
- mariadb-client-core-10.1,
- mariadb-client-core-10.2,
- mariadb-client-core-10.3,
- mariadb-client-core-10.4,
- mariadb-client-core-10.5,
- mariadb-client-core-10.6,
- mariadb-client-core-10.7,
- mariadb-client-core-10.8,
- mariadb-server (<< ${source:Version}),
- mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4,
- mariadb-server-10.5,
- mariadb-server-10.6,
- mariadb-server-10.7,
- mariadb-server-10.8,
- mariadb-server-core (<< ${source:Version}),
- mariadb-server-core-10.0,
- mariadb-server-core-10.1,
- mariadb-server-core-10.2,
- mariadb-server-core-10.3,
- mariadb-server-core-10.4,
- mariadb-server-core-10.5,
- mariadb-server-core-10.6,
- mariadb-server-core-10.7,
- mariadb-server-core-10.8,
- mysql-client (<< 5.0.51),
- mysql-client-5.0,
- mysql-client-5.1,
- mysql-client-5.5,
- mysql-client-5.6,
- mysql-client-5.7,
- mysql-client-8.0,
- mysql-client-core-5.0,
- mysql-client-core-5.1,
- mysql-client-core-5.5,
- mysql-client-core-5.6,
- mysql-client-core-5.7,
- mysql-client-core-8.0,
- mysql-server-5.5,
- mysql-server-5.6,
- mysql-server-5.7,
- mysql-server-8.0,
- mysql-server-core-5.5,
- mysql-server-core-5.6,
- mysql-server-core-5.7,
- mysql-server-core-8.0,
- mytop,
- percona-server-server-5.6,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7,
- virtual-mysql-client
- Provides: default-mysql-client,
- virtual-mysql-client
- Recommends: libdbd-mariadb-perl | libdbd-mysql-perl,
- libdbi-perl,
- libterm-readkey-perl,
- mariadb-client-compat
++Depends:
++ libmariadb3 (>= 10.5.4),
++ mariadb-common (>= ${source:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
++Conflicts:
++ mysql-client-5.5,
++ mysql-client-5.6,
++ mysql-client-5.7,
++ mysql-client-8.0,
++ virtual-mysql-client-core,
++Breaks:
++ mariadb-client-10.0,
++ mariadb-client-core-10.0,
++ mariadb-client-core-10.1,
++ mariadb-client-core-10.2,
++ mariadb-client-core-10.3,
++ mariadb-client-core-10.4,
++ mariadb-client-core-10.5,
++ mariadb-client-core-10.6,
++ mariadb-client-core-5.5,
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++ mariadb-server-core (<< ${source:Version}),
++ mariadb-server-core-10.3,
++ mariadb-server-core-10.4,
++ mariadb-server-core-10.5,
++ mariadb-server-core-10.6,
++ mysql-client-core (<< 9.9~),
++ mysql-client-core-5.5,
++ mysql-client-core-5.6,
++ mysql-client-core-5.7,
++ mysql-client-core-8.0,
++ mysql-cluster-community-client-plugins,
++ mysql-server-core (<< 9.9~),
++ mysql-server-core-5.5,
++ mysql-server-core-5.6,
++ mysql-server-core-5.7,
++ mysql-server-core-8.0,
++ percona-server-server-5.6,
++ percona-server-server-5.7,
++ percona-server-server-8.0,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
++ percona-xtradb-cluster-server-8.0,
++Replaces:
++ mariadb-client-10.0,
++ mariadb-client-core-10.0,
++ mariadb-client-core-10.1,
++ mariadb-client-core-10.2,
++ mariadb-client-core-10.3,
++ mariadb-client-core-10.4,
++ mariadb-client-core-10.5,
++ mariadb-client-core-10.6,
++ mariadb-client-core-5.5,
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++ mariadb-server-core (<< ${source:Version}),
++ mariadb-server-core-10.3,
++ mariadb-server-core-10.4,
++ mariadb-server-core-10.5,
++ mariadb-server-core-10.6,
++ mysql-client-core (<< 9.9~),
++ mysql-client-core-5.5,
++ mysql-client-core-5.6,
++ mysql-client-core-5.7,
++ mysql-client-core-8.0,
++ mysql-cluster-community-client-plugins,
++ mysql-server-core (<< 9.9~),
++ mysql-server-core-5.5,
++ mysql-server-core-5.6,
++ mysql-server-core-5.7,
++ mysql-server-core-8.0,
++ percona-server-server-5.6,
++ percona-server-server-5.7,
++ percona-server-server-8.0,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
++ percona-xtradb-cluster-server-8.0,
++ virtual-mysql-client-core,
++Provides:
++ virtual-mysql-client-core,
+Description: MariaDB database core client binaries
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package includes the core client files, as used by Akonadi.
+
+Package: mariadb-client
+Architecture: any
- Depends: mariadb-client (>= ${source:Version})
- Conflicts: mariadb-client (<< 11.0.0),
- mariadb-client-10.0,
- mariadb-client-10.1,
- mariadb-client-10.2,
- mariadb-client-10.3,
- mariadb-client-10.4,
- mariadb-client-10.5,
- mariadb-client-10.6,
- mariadb-client-10.7,
- mariadb-client-10.8,
- mariadb-client-5.1,
- mariadb-client-5.2,
- mariadb-client-5.3,
- mariadb-client-5.5,
- mariadb-client-core (<< 11.0.0),
- mariadb-client-core-10.0,
- mariadb-client-core-10.1,
- mariadb-client-core-10.2,
- mariadb-client-core-10.3,
- mariadb-client-core-10.4,
- mariadb-client-core-10.5,
- mariadb-client-core-10.6,
- mariadb-client-core-10.7,
- mariadb-client-core-10.8,
- mariadb-client-core-5.1,
- mariadb-client-core-5.2,
- mariadb-client-core-5.3,
- mariadb-client-core-5.5,
- mariadb-server (<< 11.0.0),
- mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4,
- mariadb-server-10.5,
- mariadb-server-10.6,
- mariadb-server-10.7,
- mariadb-server-10.8,
- mariadb-server-core (<< 11.0.0),
- mariadb-server-core-10.0,
- mariadb-server-core-10.1,
- mariadb-server-core-10.2,
- mariadb-server-core-10.3,
- mariadb-server-core-10.4,
- mariadb-server-core-10.5,
- mariadb-server-core-10.6,
- mariadb-server-core-10.7,
- mariadb-server-core-10.8,
- mysql-client (<< 5.0.51),
- mysql-client-5.0,
- mysql-client-5.1,
- mysql-client-5.5,
- mysql-client-5.6,
- mysql-client-5.7,
- mysql-client-8.0,
- mysql-client-core-5.0,
- mysql-client-core-5.1,
- mysql-client-core-5.5,
- mysql-client-core-5.6,
- mysql-client-core-5.7,
- mysql-client-core-8.0,
- mysql-server-5.7,
- mysql-server-core-8.0,
- percona-server-server,
- percona-server-server-5.6,
- percona-xtradb-cluster-server,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7
++Depends:
++ debianutils (>=1.6),
++ mariadb-client-core (>= ${source:Version}),
++ ${misc:Depends},
++ ${perl:Depends},
++ ${shlibs:Depends},
++Conflicts:
++ mysql-client-core-5.5,
++ mysql-client-core-5.6,
++ mysql-client-core-5.7,
++ mysql-client-core-8.0,
++ mytop,
++ virtual-mysql-client,
++Breaks:
++ mariadb-client-10.0,
++ mariadb-client-10.1,
++ mariadb-client-10.2,
++ mariadb-client-10.3,
++ mariadb-client-10.4,
++ mariadb-client-10.5,
++ mariadb-client-10.6,
++ mariadb-client-5.5,
++ mariadb-client-compat (<< ${source:Version}),
++ mariadb-client-core (<< ${source:Version}),
++ mariadb-client-core-10.0,
++ mariadb-client-core-10.1,
++ mariadb-client-core-10.2,
++ mariadb-client-core-10.3,
++ mariadb-client-core-10.4,
++ mariadb-client-core-10.5,
++ mariadb-client-core-10.6,
++ mariadb-server (<< ${source:Version}),
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++ mariadb-server-10.2,
++ mariadb-server-10.3,
++ mariadb-server-10.4,
++ mariadb-server-10.5 (<< 1:10.11),
++ mariadb-server-10.6,
++ mysql-client-5.5,
++ mysql-client-5.6,
++ mysql-client-5.7,
++ mysql-client-8.0,
++ mysql-client-core (<< 9.9~),
++ mysql-server-5.5,
++ mysql-server-5.7,
++ mysql-server-core (<< 9.9~),
++ mysql-server-core-8.0,
++ percona-server-server-5.6,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
++Replaces:
++ mariadb-client-10.0,
++ mariadb-client-10.1,
++ mariadb-client-10.2,
++ mariadb-client-10.3,
++ mariadb-client-10.4,
++ mariadb-client-10.5,
++ mariadb-client-10.6,
++ mariadb-client-5.5,
++ mariadb-client-compat (<< ${source:Version}),
++ mariadb-client-core (<< ${source:Version}),
++ mariadb-client-core-10.0,
++ mariadb-client-core-10.1,
++ mariadb-client-core-10.2,
++ mariadb-client-core-10.3,
++ mariadb-client-core-10.4,
++ mariadb-client-core-10.5,
++ mariadb-client-core-10.6,
++ mariadb-server (<< ${source:Version}),
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++ mariadb-server-10.2,
++ mariadb-server-10.3,
++ mariadb-server-10.4,
++ mariadb-server-10.5 (<< 1:10.11),
++ mariadb-server-10.6,
++ mysql-client-5.5,
++ mysql-client-5.6,
++ mysql-client-5.7,
++ mysql-client-8.0,
++ mysql-client-core (<< 9.9~),
++ mysql-server-5.5,
++ mysql-server-5.7,
++ mysql-server-core (<< 9.9~),
++ mysql-server-core-8.0,
++ mytop,
++ percona-server-server-5.6,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
++ virtual-mysql-client,
++Provides:
++ virtual-mysql-client,
++Suggests:
++ libdbd-mariadb-perl | libdbd-mysql-perl,
++ libdbi-perl,
++ libterm-readkey-perl,
+Description: MariaDB database client binaries
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package includes the client binaries and the additional tools
+ innotop and mariadb-report (mysqlreport).
+
+Package: mariadb-client-compat
+Architecture: all
- Description: MySQL compatibility links to mariadb-client binaries/scripts.
++Depends:
++ mariadb-client (>= ${source:Version}),
++ ${misc:Depends},
++Breaks:
++ mariadb-client (<< 1:11.0.0),
++ mariadb-client-core (<< 1:11.0.0),
++ mariadb-server (<< 1:11.0.0),
++ mariadb-server-10.5 (<< 1:10.11),
++ mariadb-server-core (<< 1:11.0.0),
++ mysql-client (<< 5.0.51),
++ mysql-client-core (<< 9.9~),
++ mysql-server-5.5,
++ mysql-server-core (<< 9.9~),
++Replaces:
++ mariadb-client (<< 1:11.0.0),
++ mariadb-client-core (<< 1:11.0.0),
++ mariadb-server (<< 1:11.0.0),
++ mariadb-server-10.5 (<< 1:10.11),
++ mariadb-server-core (<< 1:11.0.0),
++ mysql-client (<< 5.0.51),
++ mysql-client-core (<< 9.9~),
++ mysql-server-5.5,
++ mysql-server-core (<< 9.9~),
++Conflicts:
++ mariadb-client-10.0,
++ mariadb-client-10.1,
++ mariadb-client-10.2,
++ mariadb-client-10.3,
++ mariadb-client-10.4,
++ mariadb-client-10.5,
++ mariadb-client-10.6,
++ mariadb-client-10.7,
++ mariadb-client-10.8,
++ mariadb-client-5.1,
++ mariadb-client-5.2,
++ mariadb-client-5.3,
++ mariadb-client-5.5,
++ mariadb-client-core-10.0,
++ mariadb-client-core-10.1,
++ mariadb-client-core-10.2,
++ mariadb-client-core-10.3,
++ mariadb-client-core-10.4,
++ mariadb-client-core-10.5,
++ mariadb-client-core-10.6,
++ mariadb-client-core-10.7,
++ mariadb-client-core-10.8,
++ mariadb-client-core-5.1,
++ mariadb-client-core-5.2,
++ mariadb-client-core-5.3,
++ mariadb-client-core-5.5,
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++ mariadb-server-10.2,
++ mariadb-server-10.3,
++ mariadb-server-10.4,
++ mariadb-server-10.6,
++ mariadb-server-10.7,
++ mariadb-server-10.8,
++ mariadb-server-core-10.0,
++ mariadb-server-core-10.1,
++ mariadb-server-core-10.2,
++ mariadb-server-core-10.3,
++ mariadb-server-core-10.4,
++ mariadb-server-core-10.5,
++ mariadb-server-core-10.6,
++ mariadb-server-core-10.7,
++ mariadb-server-core-10.8,
++ mysql-client-5.0,
++ mysql-client-5.1,
++ mysql-client-5.5,
++ mysql-client-5.6,
++ mysql-client-5.7,
++ mysql-client-8.0,
++ mysql-client-core-5.0,
++ mysql-client-core-5.1,
++ mysql-client-core-5.5,
++ mysql-client-core-5.6,
++ mysql-client-core-5.7,
++ mysql-client-core-8.0,
++ mysql-server-5.7,
++ mysql-server-core-8.0,
++ percona-server-server,
++ percona-server-server-5.6,
++ percona-xtradb-cluster-server,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
+Multi-Arch: foreign
- This package is also useful for users with strong background in MySQL
- maintenance, but wants to switch to MariaDB
++Description: MySQL compatibility links to mariadb-client binaries/scripts
+ The package contains links and binaries that are needed by MySQL centric
+ tools which also works with MariaDB.
+ .
- Depends: mariadb-common (>= ${source:Version}),
- ${misc:Depends},
- ${shlibs:Depends}
- Conflicts: mariadb-server-core-10.0,
- mariadb-server-core-10.1,
- mariadb-server-core-10.2,
- mariadb-server-core-10.3,
- mariadb-server-core-10.4,
- mariadb-server-core-10.5,
- mariadb-server-core-10.6,
- mariadb-server-core-10.7,
- mariadb-server-core-10.8,
- mariadb-server-core-5.1,
- mariadb-server-core-5.2,
- mariadb-server-core-5.3,
- mariadb-server-core-5.5,
- mysql-server-5.0,
- mysql-server-core-5.0,
- mysql-server-core-5.1,
- mysql-server-core-5.5,
- mysql-server-core-5.6,
- mysql-server-core-5.7,
- mysql-server-core-8.0,
- virtual-mysql-server-core
- Breaks: mariadb-client (<< ${source:Version}),
- mariadb-client-10.0,
- mariadb-client-10.1,
- mariadb-client-10.2,
- mariadb-client-10.3,
- mariadb-client-10.4,
- mariadb-client-10.5,
- mariadb-client-10.6,
- mariadb-client-10.7,
- mariadb-client-10.8,
- mariadb-server (<< ${source:Version}),
- mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4,
- mariadb-server-10.5,
- mariadb-server-10.6,
- mariadb-server-10.7,
- mariadb-server-10.8,
- mysql-client-5.5,
- mysql-server-5.5,
- mysql-server-5.6,
- mysql-server-5.7,
- mysql-server-8.0,
- percona-server-server-5.6,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7
- Replaces: mariadb-client (<< ${source:Version}),
- mariadb-client-10.0,
- mariadb-client-10.1,
- mariadb-client-10.2,
- mariadb-client-10.3,
- mariadb-client-10.4,
- mariadb-client-10.5,
- mariadb-client-10.6,
- mariadb-client-10.7,
- mariadb-client-10.8,
- mariadb-server (<< ${source:Version}),
- mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4,
- mariadb-server-10.5,
- mariadb-server-10.6,
- mariadb-server-10.7,
- mariadb-server-10.8,
- mariadb-server-core-10.0,
- mariadb-server-core-10.1,
- mariadb-server-core-10.2,
- mariadb-server-core-10.3,
- mariadb-server-core-10.4,
- mariadb-server-core-10.5,
- mariadb-server-core-5.1,
- mariadb-server-core-5.2,
- mariadb-server-core-5.3,
- mariadb-server-core-5.5,
- mysql-client-5.5,
- mysql-server-5.0,
- mysql-server-5.5,
- mysql-server-5.6,
- mysql-server-5.7,
- mysql-server-8.0,
- mysql-server-core-5.0,
- mysql-server-core-5.1,
- mysql-server-core-5.5,
- mysql-server-core-5.6,
- mysql-server-core-5.7,
- mysql-server-core-8.0,
- percona-server-server-5.6,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7,
- virtual-mysql-server-core
- Provides: default-mysql-server-core,
- virtual-mysql-server-core
++ This package is also useful for users who are switcing from MySQL to
++ MariaDB and want to use continue using the legacy 'mysql*' command-line
++ tools instead of the new 'mariadb-*' equivalents.
+
+Package: mariadb-server-core
+Architecture: any
- Suggests: mailx,
- mariadb-test,
- netcat-openbsd
- Recommends: libhtml-template-perl,
- mariadb-server-compat,
- pv
- Pre-Depends: adduser (>= 3.40),
- debconf,
- mariadb-common (>= ${source:Version})
- Depends: galera-4 (>= 26.4),
- gawk,
- iproute2 [linux-any],
- libdbi-perl,
- lsof [linux-any],
- mariadb-client (>= ${source:Version}),
- mariadb-server-core (>= ${source:Version}),
- passwd,
- perl (>= 5.6),
- procps,
- psmisc,
- rsync,
- socat,
- ${misc:Depends},
- ${perl:Depends},
- ${shlibs:Depends}
- Conflicts: mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4,
- mariadb-server-10.5,
- mariadb-server-10.6,
- mariadb-server-10.7,
- mariadb-server-10.8,
- mariadb-server-5.1,
- mariadb-server-5.2,
- mariadb-server-5.3,
- mariadb-server-5.5,
- mysql-client-5.5,
- mysql-client-5.6,
- mysql-client-5.7,
- mysql-client-8.0,
- mysql-client-core-8.0,
- mysql-server,
- mysql-server-4.1,
- mysql-server-5.0,
- mysql-server-5.1,
- mysql-server-5.5,
- mysql-server-5.6,
- mysql-server-5.7,
- mysql-server-8.0,
- mysql-server-core-5.5,
- mysql-server-core-5.6,
- mysql-server-core-5.7,
- mysql-server-core-8.0,
- virtual-mysql-server
- Breaks: handlersocket-mysql-5.5,
- percona-server-server-5.6,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7
- Replaces: handlersocket-mysql-5.5,
- libmariadbclient-dev (<< 5.5.0),
- libmariadbclient16,
- mariadb-client (<< ${source:Version}),
- mariadb-client-10.5,
- mariadb-client-10.6,
- mariadb-client-10.7,
- mariadb-client-10.8,
- mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4,
- mariadb-server-10.5,
- mariadb-server-10.6,
- mariadb-server-10.7,
- mariadb-server-10.8,
- mariadb-server-5.1,
- mariadb-server-5.2,
- mariadb-server-5.3,
- mariadb-server-5.5,
- mysql-client-5.5,
- mysql-client-5.6,
- mysql-client-5.7,
- mysql-client-8.0,
- mysql-client-core-8.0,
- mysql-server,
- mysql-server-4.1,
- mysql-server-5.0,
- mysql-server-5.1,
- mysql-server-5.5,
- mysql-server-5.6,
- mysql-server-5.7,
- mysql-server-8.0,
- percona-server-server-5.6,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7,
- virtual-mysql-server
- Provides: default-mysql-server,
- virtual-mysql-server
++Depends:
++ mariadb-common (>= ${source:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
++Conflicts:
++ mariadb-galera-server-5.5,
++ mysql-server-5.5,
++ mysql-server-5.6,
++ mysql-server-5.7,
++ mysql-server-8.0,
++ virtual-mysql-server-core,
++Breaks:
++ mariadb-client-10.1,
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++ mariadb-server-10.2,
++ mariadb-server-10.3,
++ mariadb-server-10.4,
++ mariadb-server-10.5 (<< 1:10.11),
++ mariadb-server-compat (<< ${source:Version}),
++ mariadb-server-core-10.0,
++ mariadb-server-core-10.1,
++ mariadb-server-core-10.2,
++ mariadb-server-core-10.3,
++ mariadb-server-core-10.4,
++ mariadb-server-core-10.5,
++ mariadb-server-core-10.6,
++ mariadb-server-core-5.5,
++ mysql-client-5.5,
++ mysql-client-5.6,
++ mysql-server-core (<< 9.9~),
++ mysql-server-core-5.5,
++ mysql-server-core-5.6,
++ mysql-server-core-5.7,
++ mysql-server-core-8.0,
++ percona-server-server-5.6,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
++Replaces:
++ mariadb-client-10.1,
++ mariadb-server (<< ${source:Version}),
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++ mariadb-server-10.2,
++ mariadb-server-10.3,
++ mariadb-server-10.4,
++ mariadb-server-10.5 (<< 1:10.11),
++ mariadb-server-10.6,
++ mariadb-server-compat (<< ${source:Version}),
++ mariadb-server-core-10.0,
++ mariadb-server-core-10.1,
++ mariadb-server-core-10.2,
++ mariadb-server-core-10.3,
++ mariadb-server-core-10.4,
++ mariadb-server-core-10.5,
++ mariadb-server-core-10.6,
++ mariadb-server-core-5.5,
++ mysql-client-5.5,
++ mysql-client-5.6,
++ mysql-client-5.7,
++ mysql-client-8.0,
++ mysql-server-core (<< 9.9~),
++ mysql-server-core-5.5,
++ mysql-server-core-5.6,
++ mysql-server-core-5.7,
++ mysql-server-core-8.0,
++ percona-server-server-5.6,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
++ virtual-mysql-server-core,
++Provides:
++ virtual-mysql-server-core,
+Description: MariaDB database core server files
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package includes the core server files, as used by Akonadi.
+
+Package: mariadb-server
+Architecture: any
- Depends: mariadb-server (>= ${source:Version})
- Conflicts: mariadb-server (<< 11.0.0),
- mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4,
- mariadb-server-10.5,
- mariadb-server-10.6,
- mariadb-server-10.7,
- mariadb-server-10.8,
- mariadb-server-5.1,
- mariadb-server-5.2,
- mariadb-server-5.3,
- mariadb-server-5.5,
- mariadb-server-core (<< 11.0.0),
- mariadb-server-core-10.0,
- mariadb-server-core-10.1,
- mariadb-server-core-10.2,
- mariadb-server-core-10.3,
- mariadb-server-core-10.4,
- mariadb-server-core-10.5,
- mariadb-server-core-10.6,
- mariadb-server-core-10.7,
- mariadb-server-core-10.8,
- mariadb-server-core-5.1,
- mariadb-server-core-5.2,
- mariadb-server-core-5.3,
- mariadb-server-core-5.5,
- mysql-server-5.0,
- mysql-server-core-5.0,
- mysql-server-core-5.1,
- mysql-server-core-5.5,
- mysql-server-core-5.6,
- mysql-server-core-5.7,
- mysql-server-core-8.0,
- percona-server-server,
- percona-server-server-5.6,
- percona-server-server-5.7,
- percona-xtradb-cluster-server,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7
++Suggests:
++ mailx,
++ mariadb-test,
++ netcat-openbsd,
++Recommends:
++ libhtml-template-perl,
++ mariadb-plugin-provider-bzip2,
++ mariadb-plugin-provider-lz4,
++ mariadb-plugin-provider-lzma,
++ mariadb-plugin-provider-lzo,
++ mariadb-plugin-provider-snappy,
++ pv,
++Pre-Depends:
++ debconf,
++ mariadb-common (>= ${source:Version}),
++ procps,
++ ${misc:Pre-Depends},
++Depends:
++ galera-4 (>= 26.4),
++ gawk,
++ iproute2 [linux-any],
++ libdbi-perl,
++ lsof [linux-any],
++ mariadb-client (>= ${source:Version}),
++ mariadb-server-core (>= ${server:Version}),
++ passwd,
++ perl (>= 5.6),
++ psmisc,
++ rsync,
++ socat,
++ systemd-sysusers | systemd-standalone-sysusers | systemd,
++ ${misc:Depends},
++ ${shlibs:Depends},
++Conflicts:
++ handlersocket-mysql-5.5,
++ mariadb-tokudb-engine-10.0,
++ mariadb-tokudb-engine-10.1,
++ mariadb-tokudb-engine-5.5,
++ mysql-server-core-5.5,
++ mysql-server-core-5.6,
++ mysql-server-core-5.7,
++ mysql-server-core-8.0,
++ percona-server-server-5.6,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
++ virtual-mysql-server,
++Breaks:
++ cqrlog (<< 1.9.0-5~),
++ galera-3 (<< 26.4),
++ handlersocket-mysql-5.5,
++ mariadb-galera-server,
++ mariadb-galera-server-10.0,
++ mariadb-galera-server-5.5,
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++ mariadb-server-10.2,
++ mariadb-server-10.3,
++ mariadb-server-10.4,
++ mariadb-server-10.5 (<< 1:10.11),
++ mariadb-server-10.6,
++ mariadb-server-5.5,
++ mariadb-tokudb-engine-10.0,
++ mariadb-tokudb-engine-10.1,
++ mariadb-tokudb-engine-5.5,
++ mysql-client-5.5,
++ mysql-client-5.7,
++ mysql-client-core (<< 9.9~),
++ mysql-client-core-8.0,
++ mysql-server (<< 9.9~),
++ mysql-server-5.5,
++ mysql-server-5.6,
++ mysql-server-5.7,
++ mysql-server-8.0,
++ mysql-server-core (<< 9.9~),
++Replaces:
++ handlersocket-mysql-5.5,
++ mariadb-galera-server,
++ mariadb-galera-server-10.0,
++ mariadb-galera-server-5.5,
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++ mariadb-server-10.2,
++ mariadb-server-10.3,
++ mariadb-server-10.4,
++ mariadb-server-10.5 (<< 1:10.11),
++ mariadb-server-10.6,
++ mariadb-server-5.5,
++ mariadb-tokudb-engine-10.0,
++ mariadb-tokudb-engine-10.1,
++ mariadb-tokudb-engine-5.5,
++ mysql-client-5.5,
++ mysql-client-5.7,
++ mysql-client-core (<< 9.9~),
++ mysql-client-core-8.0,
++ mysql-server (<< 9.9~),
++ mysql-server-5.5,
++ mysql-server-5.6,
++ mysql-server-5.7,
++ mysql-server-8.0,
++ mysql-server-core (<< 9.9~),
++ percona-server-server-5.6,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
++ virtual-mysql-server,
++Provides:
++ virtual-mysql-server,
+Description: MariaDB database server binaries
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package includes the server binaries.
+
+Package: mariadb-server-compat
+Architecture: all
- Description: MySQL compatibility links to mariadb-server binaries/scripts.
++Depends:
++ mariadb-server (>= ${source:Version}),
++ ${misc:Depends},
++Breaks:
++ mariadb-server (<< 1:11.0.0),
++ mariadb-server-10.5 (<< 1:10.11),
++ mariadb-server-core (<< 1:11.0.0),
++ mysql-server-5.5,
++ mysql-server-5.7,
++ mysql-server-core (<< 9.9~),
++Replaces:
++ mariadb-server (<< 1:11.0.0),
++ mariadb-server-10.5 (<< 1:10.11),
++ mariadb-server-core (<< 1:11.0.0),
++ mysql-server-5.5,
++ mysql-server-5.7,
++ mysql-server-core (<< 9.9~),
++Conflicts:
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++ mariadb-server-10.2,
++ mariadb-server-10.3,
++ mariadb-server-10.4,
++ mariadb-server-10.6,
++ mariadb-server-10.7,
++ mariadb-server-10.8,
++ mariadb-server-5.1,
++ mariadb-server-5.2,
++ mariadb-server-5.3,
++ mariadb-server-5.5,
++ mariadb-server-core-10.0,
++ mariadb-server-core-10.1,
++ mariadb-server-core-10.2,
++ mariadb-server-core-10.3,
++ mariadb-server-core-10.4,
++ mariadb-server-core-10.5,
++ mariadb-server-core-10.6,
++ mariadb-server-core-10.7,
++ mariadb-server-core-10.8,
++ mariadb-server-core-5.1,
++ mariadb-server-core-5.2,
++ mariadb-server-core-5.3,
++ mariadb-server-core-5.5,
++ mysql-server-5.0,
++ mysql-server-core-5.0,
++ mysql-server-core-5.1,
++ mysql-server-core-5.5,
++ mysql-server-core-5.6,
++ mysql-server-core-5.7,
++ mysql-server-core-8.0,
++ percona-server-server,
++ percona-server-server-5.6,
++ percona-server-server-5.7,
++ percona-xtradb-cluster-server,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
+Multi-Arch: foreign
- tools which also works with MariaDB.
++Description: MySQL compatibility links to mariadb-server binaries/scripts
+ The package contains links and binaries that are needed by MySQL centric
- This package is also useful for users with strong background in MySQL
- maintenance, but wants to switch to MariaDB
++ tools which also work with MariaDB.
+ .
- Breaks: mariadb-backup-10.1,
- mariadb-backup-10.2,
- mariadb-backup-10.3,
- mariadb-client-10.1
- Replaces: mariadb-backup-10.1,
- mariadb-backup-10.2,
- mariadb-backup-10.3,
- mariadb-client-10.1
- Depends: mariadb-client-core (= ${binary:Version}),
- ${misc:Depends},
- ${shlibs:Depends}
++ This package is also useful for users who are switcing from MySQL to
++ MariaDB and want to use continue using the legacy 'mysqld' and other
++ binary names instead of the new 'mariadbd' and alike.
+
+Package: mariadb-backup
+Architecture: any
- Depends: mariadb-server (= ${server:Version}),
- unixodbc,
- ${misc:Depends},
- ${shlibs:Depends}
- Recommends: curl
- Breaks: mariadb-connect-engine-10.0,
- mariadb-connect-engine-10.1,
- mariadb-connect-engine-10.2,
- mariadb-connect-engine-10.3,
- mariadb-connect-engine-10.4,
- mariadb-server-10.0,
- mariadb-server-10.1
- Replaces: mariadb-connect-engine-10.0,
- mariadb-connect-engine-10.1,
- mariadb-connect-engine-10.2,
- mariadb-connect-engine-10.3,
- mariadb-connect-engine-10.4,
- mariadb-server-10.0,
- mariadb-server-10.1
- Suggests: mariadb-plugin-connect-jdbc
++Breaks:
++ mariadb-backup-10.1,
++ mariadb-backup-10.2,
++ mariadb-backup-10.3,
++ mariadb-client-10.1,
++Replaces:
++ mariadb-backup-10.1,
++ mariadb-backup-10.2,
++ mariadb-backup-10.3,
++ mariadb-client-10.1,
++Depends:
++ mariadb-client-core (= ${binary:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
+Description: Backup tool for MariaDB server
+ Based on Xtrabackup, but improved to work with MariaDB server.
+ This backup tool is guaranteed to be compatible with MariaDB server.
+ .
+ Please refer to the MariaDB Knowledge Base on more information on
+ how to use this tool.
+
+Package: mariadb-plugin-connect
+Architecture: any
- Architecture: any
- Depends: default-jre-headless
- Suggests: libcsvjdbc-java,
- libmariadb-java,
- libpostgis-java,
- libpostgresql-jdbc-java,
- libxerial-sqlite-jdbc-java
- Enhances: mariadb-plugin-connect
- Description: Connect storage engine JDBC interface for MariaDB server.
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ unixodbc,
++ ${misc:Depends},
++ ${shlibs:Depends},
++Recommends:
++ curl,
++Conflicts:
++ mariadb-connect-engine-10.0,
++ mariadb-connect-engine-10.1,
++Breaks:
++ mariadb-connect-engine-10.0,
++ mariadb-connect-engine-10.1,
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++Replaces:
++ mariadb-connect-engine-10.0,
++ mariadb-connect-engine-10.1,
++ mariadb-server-10.0,
++ mariadb-server-10.1,
+Description: Connect storage engine for MariaDB server
+ Connect engine supports a number of file formats (dbf, xml, txt, bin, etc),
+ connections to ODBC tables and remote MySQL tables, as well as a number of
+ other interesting features.
+ This package contains the Connect plugin for MariaDB server.
+
+Package: mariadb-plugin-connect-jdbc
- This package contains the Connect SE plugin JDBC interface file for MariaDB server.
++Architecture: all
++Depends:
++ default-jre-headless,
++ ${misc:Depends},
++Suggests:
++ libcsvjdbc-java,
++ libmariadb-java,
++ libpostgis-java,
++ libpostgresql-jdbc-java,
++ libxerial-sqlite-jdbc-java,
++Enhances:
++ mariadb-plugin-connect,
++Description: Connect storage engine JDBC interface for MariaDB server
+ To connect to remote DBMS using Connect Storage Engine (SE) and JDBC driver,
+ there is need for JDBC interface byte code.
+ The JDBC driver for the remote DBMS connection is required.
- Depends: mariadb-server (= ${server:Version}),
- ${misc:Depends},
- ${shlibs:Depends}
++ This package contains the Connect SE plugin JDBC interface file for MariaDB
++ server.
+
+Package: mariadb-plugin-s3
+Architecture: any
- Architecture: amd64 arm64 mips64el ppc64el riscv64
- Depends: mariadb-server (= ${server:Version}),
- python3:any,
- rocksdb-tools,
- ${misc:Depends},
- ${shlibs:Depends}
- Breaks: mariadb-rocksdb-engine-10.2,
- mariadb-rocksdb-engine-10.3,
- mariadb-rocksdb-engine-10.4
- Replaces: mariadb-rocksdb-engine-10.2,
- mariadb-rocksdb-engine-10.3,
- mariadb-rocksdb-engine-10.4
- Recommends: python3-mysqldb
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
+Description: Amazon S3 archival storage engine for MariaDB
+ The S3 storage engine allows one to archive MariaDB tables in Amazon S3 (or any
+ third-party public or private cloud that implements S3 API), but still have
+ them accessible in MariaDB in read-only mode.
+
+Package: mariadb-plugin-rocksdb
- Depends: mariadb-server (= ${server:Version}),
- ${misc:Depends},
- ${shlibs:Depends}
- Breaks: mariadb-oqgraph-engine-10.0,
- mariadb-oqgraph-engine-10.1,
- mariadb-oqgraph-engine-10.2,
- mariadb-oqgraph-engine-10.3,
- mariadb-oqgraph-engine-10.4,
- mariadb-server-10.0,
- mariadb-server-10.1
- Replaces: mariadb-oqgraph-engine-10.0,
- mariadb-oqgraph-engine-10.1,
- mariadb-oqgraph-engine-10.2,
- mariadb-oqgraph-engine-10.3,
- mariadb-oqgraph-engine-10.4,
- mariadb-server-10.0,
- mariadb-server-10.1
++Architecture: amd64 arm64 loong64 mips64el ppc64el riscv64
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ python3:any,
++ rocksdb-tools,
++ ${misc:Depends},
++ ${shlibs:Depends},
++Breaks:
++ mariadb-rocksdb-engine-10.2,
++ mariadb-rocksdb-engine-10.3,
++Replaces:
++ mariadb-rocksdb-engine-10.2,
++ mariadb-rocksdb-engine-10.3,
++Recommends:
++ python3-mysqldb,
+Description: RocksDB storage engine for MariaDB server
+ The RocksDB storage engine is a high performance storage engine, aimed
+ at maximising storage efficiency while maintaining InnoDB-like performance.
+ This package contains the RocksDB plugin for MariaDB server.
+
+Package: mariadb-plugin-oqgraph
+Architecture: any
- Depends: mariadb-server (= ${server:Version}),
- ${misc:Depends},
- ${shlibs:Depends}
- Breaks: mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4
- Replaces: mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
++Conflicts:
++ mariadb-oqgraph-engine-10.0,
++ mariadb-oqgraph-engine-10.1,
++Breaks:
++ mariadb-oqgraph-engine-10.0,
++ mariadb-oqgraph-engine-10.1,
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++Replaces:
++ mariadb-oqgraph-engine-10.0,
++ mariadb-oqgraph-engine-10.1,
++ mariadb-server-10.0,
++ mariadb-server-10.1,
+Description: OQGraph storage engine for MariaDB server
+ The OQGraph engine is a computation engine plugin for handling hierarchies
+ (trees) and graphs (friend-of-a-friend, etc) cleanly through standard SQL.
+ This package contains the OQGraph plugin for MariaDB server.
+
+Package: mariadb-plugin-mroonga
+Architecture: any-alpha any-amd64 any-arm any-arm64 any-i386 any-ia64 any-mips64el any-mips64r6el any-mipsel any-mipsr6el any-nios2 any-powerpcel any-ppc64el any-sh3 any-sh4 any-tilegx
- Depends: mariadb-server (= ${server:Version}),
- ${misc:Depends},
- ${shlibs:Depends}
- Breaks: mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4
- Replaces: mariadb-server-10.0,
- mariadb-server-10.1,
- mariadb-server-10.2,
- mariadb-server-10.3,
- mariadb-server-10.4
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
++Breaks:
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++Replaces:
++ mariadb-server-10.0,
++ mariadb-server-10.1,
+Description: Mroonga storage engine for MariaDB server
+ Mroonga (formerly named Groonga Storage Engine) is a storage engine that
+ provides fast CJK-ready full text searching using column store.
+ This package contains the Mroonga plugin for MariaDB server.
+
+Package: mariadb-plugin-spider
+Architecture: any
- Depends: mariadb-server (= ${server:Version}),
- ${misc:Depends},
- ${shlibs:Depends}
- Breaks: mariadb-gssapi-server-10.1,
- mariadb-gssapi-server-10.2,
- mariadb-gssapi-server-10.3,
- mariadb-gssapi-server-10.4,
- mariadb-server-10.0,
- mariadb-server-10.1
- Replaces: mariadb-gssapi-server-10.1,
- mariadb-gssapi-server-10.2,
- mariadb-gssapi-server-10.3,
- mariadb-gssapi-server-10.4,
- mariadb-server-10.0,
- mariadb-server-10.1
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
++Breaks:
++ mariadb-server-10.0,
++ mariadb-server-10.1,
++Replaces:
++ mariadb-server-10.0,
++ mariadb-server-10.1,
+Description: Spider storage engine for MariaDB server
+ The Spider storage engine with built-in sharding features. It supports
+ partitioning and xa transactions, and allows tables of different MariaDB server
+ instances to be handled as if they were on the same instance. It refers to one
+ possible implementation of ISO/IEC 9075-9:2008 SQL/MED.
+
+Package: mariadb-plugin-gssapi-server
+Architecture: any
- Depends: mariadb-client (= ${binary:Version}),
- ${misc:Depends},
- ${shlibs:Depends}
- Breaks: mariadb-gssapi-client-10.1,
- mariadb-gssapi-client-10.2,
- mariadb-gssapi-client-10.3,
- mariadb-gssapi-client-10.4
- Replaces: mariadb-gssapi-client-10.1,
- mariadb-gssapi-client-10.2,
- mariadb-gssapi-client-10.3,
- mariadb-gssapi-client-10.4
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
++Breaks:
++ mariadb-gssapi-server-10.1,
++ mariadb-gssapi-server-10.2,
++Replaces:
++ mariadb-gssapi-server-10.1,
++ mariadb-gssapi-server-10.2,
+Description: GSSAPI authentication plugin for MariaDB server
+ This plugin includes support for Kerberos on Unix, but can also be used for
+ Windows authentication with or without domain environment.
+ .
+ This package contains the server parts.
+
+Package: mariadb-plugin-gssapi-client
+Architecture: any
- Depends: mariadb-server,
- ${misc:Depends},
- ${shlibs:Depends}
++Depends:
++ mariadb-client (= ${binary:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
++Breaks:
++ mariadb-gssapi-client-10.1,
++ mariadb-gssapi-client-10.2,
++Replaces:
++ mariadb-gssapi-client-10.1,
++ mariadb-gssapi-client-10.2,
+Description: GSSAPI authentication plugin for MariaDB client
+ This plugin includes support for Kerberos on Unix, but can also be used for
+ Windows authentication with or without domain environment.
+ .
+ This package contains the client parts.
+
+Package: mariadb-plugin-cracklib-password-check
+Architecture: any
- Depends: mariadb-server,
- ${misc:Depends},
- ${shlibs:Depends}
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
+Description: CrackLib Password Validation Plugin for MariaDB server
+ This password validation plugin uses cracklib to allow only
+ sufficiently secure (as defined by cracklib) user passwords in
+ MariaDB server.
+ .
+ Install and configure this to enforce stronger passwords for
+ MariaDB server users.
+
+Package: mariadb-plugin-hashicorp-key-management
+Architecture: any
- Depends: mariadb-server,
- ${misc:Depends},
- ${shlibs:Depends}
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
+Description: Hashicorp Key Management plugin for MariaDB
+ This encryption plugin uses Hashicorp Vault for storing encryption
+ keys for MariaDB Data-at-Rest encryption.
+
+Package: mariadb-plugin-provider-bzip2
+Architecture: any
- Depends: mariadb-server,
- ${misc:Depends},
- ${shlibs:Depends}
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
+Description: BZip2 compression support in the server and storage engines
+ The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
+ can use different compression libraries.
+ .
+ Plugin provides BZip2 (https://sourceware.org/bzip2/) compression
+ .
+ Note that these affect InnoDB and Mroonga only;
+ RocksDB still uses the compression algorithms from its own library
+
+Package: mariadb-plugin-provider-lz4
+Architecture: any
- Depends: mariadb-server,
- ${misc:Depends},
- ${shlibs:Depends}
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
+Description: LZ4 compression support in the server and storage engines
+ The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
+ can use different compression libraries.
+ .
+ Plugin provides LZ4 (http://lz4.github.io/lz4/) compression
+ .
+ Note that these affect InnoDB and Mroonga only;
+ RocksDB still uses the compression algorithms from its own library
+
+Package: mariadb-plugin-provider-lzma
+Architecture: any
- Depends: mariadb-server,
- ${misc:Depends},
- ${shlibs:Depends}
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
+Description: LZMA compression support in the server and storage engines
+ The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
+ can use different compression libraries.
+ .
+ Plugin provides LZMA (https://tukaani.org/lzma/) compression
+ .
+ Note that these affect InnoDB and Mroonga only;
+ RocksDB still uses the compression algorithms from its own library
+
+Package: mariadb-plugin-provider-lzo
+Architecture: any
- Depends: mariadb-server,
- ${misc:Depends},
- ${shlibs:Depends}
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
+Description: LZO compression support in the server and storage engines
+ The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
+ can use different compression libraries.
+ .
+ Plugin provides LZO (http://www.oberhumer.com/opensource/lzo/) compression
+ .
+ Note that these affect InnoDB and Mroonga only;
+ RocksDB still uses the compression algorithms from its own library
+
+Package: mariadb-plugin-provider-snappy
+Architecture: any
- Depends: libnet-ssleay-perl,
- mariadb-client (= ${binary:Version}),
- mariadb-server (= ${server:Version}),
- mariadb-test-data (= ${source:Version}),
- virtual-mysql-testsuite,
- ${misc:Depends},
- ${perl:Depends},
- ${shlibs:Depends}
- Conflicts: mariadb-server-5.5,
- mysql-server-5.7,
- mysql-server-core-8.0
- Breaks: mariadb-test-10.0,
- mariadb-test-10.1,
- mariadb-test-10.2,
- mariadb-test-10.3,
- mariadb-test-10.4,
- mariadb-test-5.5,
- mysql-client-5.5,
- mysql-server-5.5,
- mysql-server-5.7,
- mysql-server-core-8.0,
- mysql-testsuite,
- mysql-testsuite-5.5,
- mysql-testsuite-5.6,
- mysql-testsuite-5.7,
- mysql-testsuite-8.0,
- percona-server-server-5.6,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7
- Replaces: mariadb-test-10.0,
- mariadb-test-10.1,
- mariadb-test-10.2,
- mariadb-test-10.3,
- mariadb-test-10.4,
- mariadb-test-5.5,
- mysql-client-5.5,
- mysql-server-5.5,
- mysql-server-5.7,
- mysql-server-core-8.0,
- mysql-testsuite,
- mysql-testsuite-5.5,
- mysql-testsuite-5.6,
- mysql-testsuite-5.7,
- mysql-testsuite-8.0,
- percona-server-server-5.6,
- percona-xtradb-cluster-server-5.6,
- percona-xtradb-cluster-server-5.7,
- virtual-mysql-testsuite
- Provides: virtual-mysql-testsuite
- Suggests: patch
++Depends:
++ mariadb-server-core (= ${server:Version}),
++ ${misc:Depends},
++ ${shlibs:Depends},
+Description: Snappy compression support in the server and storage engines
+ The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
+ can use different compression libraries.
+ .
+ Plugin provides Snappy (https://github.com/google/snappy) compression
+ .
+ Note that these affect InnoDB and Mroonga only;
+ RocksDB still uses the compression algorithms from its own library
+
+Package: mariadb-test
+Architecture: any
- Depends: ${misc:Depends},
- ${perl:Depends},
- ${shlibs:Depends}
- Breaks: mariadb-test-10.0,
- mariadb-test-10.1,
- mariadb-test-10.2,
- mariadb-test-5.5,
- mariadb-test-data-10.0,
- mysql-testsuite,
- mysql-testsuite-5.5,
- mysql-testsuite-5.6,
- mysql-testsuite-5.7,
- mysql-testsuite-8.0
- Replaces: mariadb-test-10.0,
- mariadb-test-10.1,
- mariadb-test-10.2,
- mariadb-test-5.5,
- mariadb-test-data-10.0,
- mysql-testsuite,
- mysql-testsuite-5.5,
- mysql-testsuite-5.6,
- mysql-testsuite-5.7,
- mysql-testsuite-8.0
++Depends:
++ libnet-ssleay-perl,
++ mariadb-client (= ${binary:Version}),
++ mariadb-server (= ${server:Version}),
++ mariadb-test-data (= ${source:Version}),
++ virtual-mysql-testsuite,
++ ${misc:Depends},
++ ${shlibs:Depends},
++Breaks:
++ mariadb-test-10.0,
++ mariadb-test-10.1,
++ mariadb-test-5.5,
++ mysql-client-5.5,
++ mysql-server-5.5,
++ mysql-server-5.7,
++ mysql-server-core (<< 9.9~),
++ mysql-server-core-8.0,
++ mysql-testsuite,
++ mysql-testsuite-5.5,
++ mysql-testsuite-5.6,
++ mysql-testsuite-5.7,
++ mysql-testsuite-8.0,
++ percona-server-server-5.6,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
++Replaces:
++ mariadb-test-10.0,
++ mariadb-test-10.1,
++ mariadb-test-5.5,
++ mysql-client-5.5,
++ mysql-server-5.5,
++ mysql-server-5.7,
++ mysql-server-core (<< 9.9~),
++ mysql-server-core-8.0,
++ mysql-testsuite,
++ mysql-testsuite-5.5,
++ mysql-testsuite-5.6,
++ mysql-testsuite-5.7,
++ mysql-testsuite-8.0,
++ percona-server-server-5.6,
++ percona-xtradb-cluster-server-5.6,
++ percona-xtradb-cluster-server-5.7,
++ virtual-mysql-testsuite,
++Provides:
++ virtual-mysql-testsuite,
++Suggests:
++ patch,
+Description: MariaDB database regression test suite
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package includes the regression test suite.
+
+Package: mariadb-test-data
+Architecture: all
+Multi-Arch: foreign
++Depends:
++ ${misc:Depends},
++ ${perl:Depends},
++ ${shlibs:Depends},
++Breaks:
++ mariadb-test-10.0,
++ mariadb-test-10.1,
++ mariadb-test-5.5,
++ mariadb-test-data-10.0,
++ mysql-testsuite,
++ mysql-testsuite-5.5,
++ mysql-testsuite-5.6,
++ mysql-testsuite-5.7,
++ mysql-testsuite-8.0,
++Replaces:
++ mariadb-test-10.0,
++ mariadb-test-10.1,
++ mariadb-test-5.5,
++ mariadb-test-data-10.0,
++ mysql-testsuite,
++ mysql-testsuite-5.5,
++ mysql-testsuite-5.6,
++ mysql-testsuite-5.7,
++ mysql-testsuite-8.0,
+Description: MariaDB database regression test suite - data files
+ MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
+ server. SQL (Structured Query Language) is the most popular database query
+ language in the world. The main goals of MariaDB are speed, robustness and
+ ease of use.
+ .
+ This package has the architecture independent data files for the test suite.
--- /dev/null
- == MariaDB ==
++Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
++Upstream-Name: MariaDB Server
++Upstream-Contact: https://jira.mariadb.org
++Source: https://github.com/MariaDB/server
++Comment:
++ Originally produced by a modified version of licensecheck2dep5
++ from CDBS by Clint Byrum <clint@ubuntu.com>. Hand modified to reduce
++ redundancy in the output and add appropriate license text. The file
++ has been rechecked against the source using the development version
++ of license-reconcile, see #686485.
++ .
++ Also, MySQL carries the "FOSS License Exception" specified in README
++ .
++ Quoting from README:
++ .
++ MySQL FOSS License Exception We want free and open source
++ software applications under certain licenses to be able to use
++ specified GPL-licensed MySQL client libraries despite the fact
++ that not all such FOSS licenses are compatible with version
++ 2 of the GNU General Public License. Therefore there are
++ special exceptions to the terms and conditions of the GPLv2
++ as applied to these client libraries, which are identified
++ and described in more detail in the FOSS License Exception at
++ <https://www.mysql.com/about/legal/licensing/foss-exception/>
++ (and <https://oss.oracle.com/licenses/universal-foss-exception/>).
++ .
++ The text of the Above URL is quoted below, as of Aug 17, 2011.
++ .
++ > FOSS License Exception
++ > .
++ > Updated July 1, 2010
++ > .
++ > What is the FOSS License Exception? Oracle's Free and Open Source
++ > Software ("FOSS") License Exception (formerly known as the FLOSS
++ > License Exception) allows developers of FOSS applications to include
++ > Oracle's MySQL Client Libraries (also referred to as "MySQL Drivers"
++ > or "MySQL Connectors") with their FOSS applications. MySQL Client
++ > Libraries are typically licensed pursuant to version 2 of the General
++ > Public License ("GPL"), but this exception permits distribution of
++ > certain MySQL Client Libraries with a developer's FOSS applications
++ > licensed under the terms of another FOSS license listed below,
++ > even though such other FOSS license may be incompatible with the GPL.
++ > .
++ > The following terms and conditions describe the circumstances under
++ > which Oracle's FOSS License Exception applies.
++ > .
++ > Oracle's FOSS License Exception Terms and Conditions Definitions.
++ > "Derivative Work" means a derivative work, as defined under applicable
++ > copyright law, formed entirely from the Program and one or more
++ > FOSS Applications.
++ > .
++ > "FOSS Application" means a free and open source software application
++ > distributed subject to a license listed in the section below titled
++ > "FOSS License List."
++ > .
++ > "FOSS Notice" means a notice placed by Oracle or MySQL in a copy
++ > of the MySQL Client Libraries stating that such copy of the MySQL
++ > Client Libraries may be distributed under Oracle's or MySQL's FOSS
++ > (or FLOSS) License Exception.
++ > .
++ > "Independent Work" means portions of the Derivative Work that are not
++ > derived from the Program and can reasonably be considered independent
++ > and separate works.
++ > .
++ > "Program" means a copy of Oracle's MySQL Client Libraries that
++ > contains a FOSS Notice.
++ > .
++ > A FOSS application developer ("you" or "your") may distribute a
++ > Derivative Work provided that you and the Derivative Work meet all
++ > of the following conditions: You obey the GPL in all respects for
++ > the Program and all portions (including modifications) of the Program
++ > included in the Derivative Work (provided that this condition does not
++ > apply to Independent Works); The Derivative Work does not include any
++ > work licensed under the GPL other than the Program; You distribute
++ > Independent Works subject to a license listed in the section below
++ > titled "FOSS License List"; You distribute Independent Works in
++ > object code or executable form with the complete corresponding
++ > machine-readable source code on the same medium and under the same
++ > FOSS license applying to the object code or executable forms; All
++ > works that are aggregated with the Program or the Derivative Work
++ > on a medium or volume of storage are not derivative works of the
++ > Program, Derivative Work or FOSS Application, and must reasonably
++ > be considered independent and separate works. Oracle reserves all
++ > rights not expressly granted in these terms and conditions. If all
++ > of the above conditions are not met, then this FOSS License Exception
++ > does not apply to you or your Derivative Work.
++ > .
++ > FOSS License List
++ > .
++ > License Name Version(s)/Copyright Date
++ > Release Early Certified Software
++ > Academic Free License 2.0
++ > Apache Software License 1.0/1.1/2.0
++ > Apple Public Source License 2.0
++ > Artistic license From Perl 5.8.0
++ > BSD license "July 22 1999"
++ > Common Development and Distribution License (CDDL) 1.0
++ > Common Public License 1.0
++ > Eclipse Public License 1.0
++ > European Union Public License (EUPL)[1] 1.1
++ > GNU Library or "Lesser" General Public License (LGPL) 2.0/2.1/3.0
++ > GNU General Public License (GPL) 3.0
++ > IBM Public License 1.0
++ > Jabber Open Source License 1.0
++ > MIT License (As listed in file MIT-License.txt) -
++ > Mozilla Public License (MPL) 1.0/1.1
++ > Open Software License 2.0
++ > OpenSSL license (with original SSLeay license) "2003" ("1998")
++ > PHP License 3.0/3.01
++ > Python license (CNRI Python License) -
++ > Python Software Foundation License 2.1.1
++ > Sleepycat License "1999"
++ > University of Illinois/NCSA Open Source License -
++ > W3C License "2001"
++ > X11 License "2001"
++ > Zlib/libpng License -
++ > Zope Public License 2.0
++ > [1] When an Independent Work is licensed under a "Compatible License"
++ > pursuant to the EUPL, the Compatible License rather than the EUPL is
++ > the applicable license for purposes of these FOSS License Exception
++ > Terms and Conditions.
++ .
++ The above text is subject to this copyright notice:
++ © 2010, Oracle and/or its affiliates.
+
- The Debian package of MySQL was first debianzed on 1997-04-12 by Christian
- Schwarz <schwarz@debian.org> and is maintained since 1999-04-20 by
- Christian Hammers <ch@debian.org>.
++Files: *
++Copyright:
++ 2000-2016, Oracle and/or its affiliates. All rights reserved.
++ 2008-2013 Monty Program AB
++ 2008-2014 SkySQL Ab
++ 2013-2016 MariaDB Corporation
++ 2012-2016 MariaDB Foundation
++License: GPL-2
++
++Files: debian/*
++Copyright:
++ 1997-1998, Scott Hanson <shanson@debian.org>
++ 1997 Christian Schwarz <schwarz@debian.org>
++ 1999-2007, 2009, Christian Hammers <ch@debian.org>
++ 2000-2001, Christopher C. Chimelis <chris@debian.org>
++ 2001 Matthew Wilcox <willy@debian.org>
++ 2005-2007, Sean Finney <seanius@debian.org>
++ 2006 Adam Conrad <adconrad@0c3.net>
++ 2007-2011, Norbert Tretkowski <norbert@tretkowski.de>
++ 2007-2008, Monty Taylor <mordred@inaugust.com>
++ 2008 Devin Carraway <devin@debian.org>
++ 2008 Steffen Joeris <white@debian.org>
++ 2009 Canonical Ltd
++ 2010 Xavier Oswald <xoswald@debian.org>
++ 2011 Clint Byrum <clint@ubuntu.com>
++ 2011 Ondřej Surý <ondrej@debian.org>
++ 2012 Nicholas Bamber <nicholas@periapt.co.uk>
++ 2013-2016 Kristian Nielsen <knielsen@askmonty.org>
++ 2013-2026 Otto Kekäläinen <otto@debian.org>
++ 2014 Daniel Schepler <schepler@debian.org>
++ 2014 Julien Muchembled <jm@jmuchemb.eu>
++ 2014 Tobias Frost <tobi@coldtobi.de>
++ 2015 Andreas Beckmann <anbe@debian.org>
++ 2015-2016 Arnaud Fontaine <arnau@debian.org>
++ 2015-2016 Daniel Black <daniel.black@openquery.com.au>
++ 2015 Israel Tsadok <itsadok@gmail.com>
++ 2015 Jan Wagner <waja@cyconet.org>
++ 2015 Jean Weisbuch <jean@phpnet.org>
++ 2015 Olaf van der Spek <olafvdspek@gmail.com>
++ 2015-2016 Robie Basak <robie.basak@canonical.com>
++ 2016 Axel Beckert <abe@debian.org>
++ 2016 Dieter Adriaenssens <dieter.adriaenssens@gmail.com>
++ 2016 Ian Gilfillan <ian@mariadb.org>
++ 2016 James Cowgill <jcowgill@debian.org>
++ 2016 Paul Gevers <elbrus@debian.org>
++ 2016 Samuel Thibault <sthibault@debian.org>
++ 2016 Vicențiu Ciorbaru <vicentiu@mariadb.org>
++ 2025-2026 Aquila Macedo <aquilamacedo@riseup.net>
++License: GPL-2+
++
++Files: plugin/feedback/*
++Copyright: 2010 Sergei Golubchik and Monty Program Ab
++License: GPL-2
++
++Files: debian/additions/mariadb-report*
++Copyright: 2006-2008 Daniel Nichter <public@codenode.com>
++ 2012-2015 Jean Weisbuch
++License: GPL-2+
++
++Files:
++ dbug/example1.c
++ dbug/example2.c
++ dbug/example3.c
++ dbug/factorial.c
++ dbug/main.c
++ dbug/my_main.c
++ dbug/remove_function_from_trace.pl
++ dbug/tests.c
++ dbug/tests-t.pl
++ mysql-test/*
++ support-files/binary-configure.sh
++ support-files/mysqld_multi.server.sh
++ Docs/*
++Copyright: UNKNOWN
++Comment: These files fall under the blanket license specified in the file
++ COPYING and README
++ GPLv2 Disclaimer:
++ For the avoidance of doubt, except that if any license choice
++ other than GPL or LGPL is available it will apply instead,
++ Oracle elects to use only the General Public License version 2
++ (GPLv2) at this time for any software where a choice of GPL
++ license versions is made available with the language indicating
++ that GPLv2 or any later version may be used, or where a choice
++ of which version of the GPL is applied is otherwise unspecified.
++License: GPL-2
++
++Files: BUILD/*
++ client/*
++ cmake/*
++ dbug/dbug_add_tags.pl
++ extra/*
++ include/*
++ libmysqld/*
++ libservices/*
++ mysql-test/include/have_perfschema.inc
++ mysql-test/lib/mtr_cases.pm
++ mysql-test/lib/mtr_gprof.pl
++ mysql-test/lib/mtr_io.pl
++ mysql-test/lib/mtr_match.pm
++ mysql-test/lib/mtr_process.pl
++ mysql-test/lib/mtr_report.pm
++ mysql-test/lib/mtr_results.pm
++ mysql-test/lib/mtr_stress.pl
++ mysql-test/lib/mtr_unique.pm
++ mysql-test/lib/My/Config.pm
++ mysql-test/lib/My/CoreDump.pm
++ mysql-test/lib/My/File/*
++ mysql-test/lib/My/Find.pm
++ mysql-test/lib/My/Handles.pm
++ mysql-test/lib/My/Options.pm
++ mysql-test/lib/My/Platform.pm
++ mysql-test/lib/My/SafeProcess/Base.pm
++ mysql-test/lib/My/SafeProcess/safe_kill_win.cc
++ mysql-test/lib/My/SafeProcess/safe_process.cc
++ mysql-test/lib/My/SafeProcess/safe_process_win.cc
++ mysql-test/lib/My/SysInfo.pm
++ mysql-test/lib/My/Test.pm
++ mysql-test/lib/t/*
++ mysql-test/lib/v1/mtr_cases.pl
++ mysql-test/lib/v1/mtr_gcov.pl
++ mysql-test/lib/v1/mtr_gprof.pl
++ mysql-test/lib/v1/mtr_im.pl
++ mysql-test/lib/v1/mtr_io.pl
++ mysql-test/lib/v1/mtr_match.pl
++ mysql-test/lib/v1/mtr_process.pl
++ mysql-test/lib/v1/mtr_report.pl
++ mysql-test/lib/v1/mtr_stress.pl
++ mysql-test/lib/v1/mtr_timer.pl
++ mysql-test/lib/v1/mtr_unique.pl
++ mysql-test/lib/v1/My/*
++ mysql-test/lib/v1/mysql-test-run.pl
++ mysql-test/lib/v1/mtr_misc.pl
++ mysql-test/mariadb-stress-test.pl
++ mysql-test/mariadb-test-run.pl
++ mysql-test/std_data/*
++ mysql-test/suite/perfschema/include/*
++ mysql-test/suite/perfschema_stress/include/*
++ mysys/*
++ win/packaging/ca/*
++ plugin/audit_null/*
++ plugin/auth_*
++ plugin/daemon_example/*
++ plugin/fulltext/*
++ scripts/*
++ sql/*
++ sql-common/*
++ storage/*
++ strings/*
++ support-files/MacOSX/*
++ support-files/compiler_warnings.supp
++ support-files/mysql.*
++ support-files/dtrace/*
++ tests/*
++ unittest/*
++ vio/*
++Copyright: 1979-2009 MySQL AB
++ 1995-2010 Sun Microsystems Inc
++ 1994-1997,2000-2014 Oracle and/or its affiliates
++ 2010 Kristian Nielsen
++ 2012 MariaDB Services
++ 2013 MariaDB Foundation
++ 2010,2013 Sergei Golubchik
++ 1985,1995,2008-2011,2012-2014 Monty Program AB
++ 2008-2014 SykSQL Ab
++ 1993-2014 Olivier Bertrand
++ 2008-2014 Kentoku Shiba
++ 2013 Sergey Vojtovich and MariaDB Foundation
++ 2006 MySQL AB & MySQL Finland AB & TCX DataKonsult AB
++ 2012 Michael Widenius
++ 2010-2011 DeNA Co.,Ltd.
++ 2011 Kentoku SHIBA
++License: GPL-2
++
++Files: include/maria.h
++ include/myisamchk.h
++ include/my_rnd.h
++ include/thr_timer.h
++Copyright: 2006-2008 MySQL AB
++ 2008-2009 Sun Microsystems, Inc
++ 2009, 2013, 2014 Monty Program Ab
++License: GPL-2+
++
++Files: plugin/auth_pam/testing/pam_mariadb_mtr.c
++Copyright: none
++License: public-domain
++
++Files: plugin/locale_info/locale_info.cc
++Copyright: 2013, Spaempresarial - Brazil, Roberto Spadim
++License: BSD-3-clause
++
++Files: plugin/qc_info/qc_info.cc
++Copyright: 2008, Roland Bouman
++License: BSD-3-clause
++
++Files: tests/async_queries.c tests/nonblock-wrappers.h
++Copyright: 2011 Kristian Nielsen and Monty Program Ab
++License: LGPL-2.1+
++
++Files: include/ma_dyncol.h include/queues.h mysys/ma_dyncol.c mysys/queues.c
++ unittest/mysys/ma_dyncol-t.c
++Copyright: 2010,2011,2013 Monty Program Ab
++ 2011,2012 Oleksandr Byelkin
++License: BSD-2-clause
++
++Files: mysys/my_port.c
++Copyright: 2002 MySQL AB
++License: LGPL-2
++
++Files: mysys/my_safehash.*
++Copyright: 2003-2007 MySQL AB
++License: GPL-2+
++
++Files: strings/bmove_upp.c strings/is_prefix.c strings/llstr.c
++ strings/longlong2str.c strings/strcont.c strings/strfill.c strings/strmov.c
++ strings/strnmov.c strings/bchange.c strings/int2str.c strings/my_strtoll10.c
++ strings/str2int.c strings/strappend.c strings/strcend.c
++Copyright: 2009-2013, Monty Program Ab
++ 2000,2003 TXT DataKonsult Ab & Monty Program Ab
++License: BSD-2-clause
++
++Files: strings/strxmov.c
++ strings/strxnmov.c
++ strings/strnlen.c
++Copyright: 2009-2011, Monty Program Ab
++ 2000 TXT DataKonsult Ab & Monty Program Ab
++ Richard A. O'Keefe
++License: BSD-2-clause
++
++Files: client/async_example.c
++Copyright: 2011 Kristian Nielsen and Monty Program Ab
++License: LGPL-2.1+
++
++Files: storage/oqgraph/*
++Copyright:
++ 2007-2013 Arjen G Lentz & Antony T Curtis for Open Query
++ 2000-2006 MySQL AB
++License: GPL-2+
++
++Files: storage/connect/connect.cc
++Copyright: 2004-2012 Olivier Bertrand
++License: GPL-2+
++
++Files: storage/oqgraph/ha_oqgraph.*
++ storage/oqgraph/oqgraph_probes.d
++Copyright:
++ 2007-2013 Arjen G Lentz & Antony T Curtis for Open Query
++ 2000-2006 MySQL AB
++License: GPL-2
++
++Files: extra/*/INSTALL
++Copyright: 1994-1996, 1999-2002, 2004-2006, Free Software Foundation, Inc.
++License: unlimited-free-doc
++ This file is free documentation; the Free Software Foundation gives
++ unlimited permission to copy, distribute and modify it.
++
++Files: mysql-test/lib/mtr_misc.pl
++ mysql-test/lib/My/SafeProcess.pm
++Copyright: 2004, 2007, 2011, Oracle and/or its affiliates
++License: LGPL-2
++
++Files:
++ storage/myisam/ft_update.c
++ storage/myisam/fulltext.h
++ storage/myisam/ft_boolean_search.c
++ storage/myisam/ft_stopwords.c
++ storage/myisam/ft_nlq_search.c
++ storage/myisam/ft_parser.c
++ storage/myisam/myisam_ftdump.c
++Copyright:
++ 2000, 2001, 2010, 2011, Oracle and/or its affiliates
++ Sergei A. Golubchik
++License: GPL-2
++
++Files: storage/myisam/ft_myisam.c
++Copyright: 2000 MySQL AB & MySQL Finland AB & TCX DataKonsult AB
++License: GPL-2+
++
++Files: storage/innobase/*
++Copyright:
++ 1994-2011 Sergei A. Golubchik
++ 1996 Michael Widenius
++ 1994-2014 Oracle and/or its affiliates
++ 2008-2009 Google Inc
++ 2009 Sun Microsystems, Inc
++ 2009 Percona Inc
++ 2013, 2014 SkySQL Ab
++ 2012 Facebook Inc
++License: GPL-2
++
++Files: storage/maria/*
++Copyright:
++ 2008-2009 Sun Microsystems, Inc
++ 2008 Sun AB
++ 2006 MySQL Finland AB
++ 2006 TCX DataKonsult AB
++ 2003-2008 MySQL AB
++ 2007-2008 Michael Widenius
++ 2007 Guilhem Bichot
++ 2006 Sergei A. Golubchik
++ 2007 Sanja Belkin
++ 2006 Ramil Kalimullin
++ 2006 Alexey Botchkov
++ 2008-2011 Monty Program Ab
++ 2004-2008 MySQL AB & MySQL Finland AB & TCX DataKonsult AB
++License: GPL-2
++
++Files: storage/sphinx/*
++Copyright: 2001-2014 Andrew Aksyonoff
++ 2008-2014 Sphinx Technologies Inc
++License: GPL-2
++
++Files: extra/readline/*
++Copyright: 1987-2006 Free Software Foundation Inc
++License: GPL-2+
++
++Files: sql-bench/*.sh
++Copyright: 2009 Sun Microsystems, Inc
++ 2000-2007 MySQL AB
++License: LGPL-2
++
++Files: client/completion_hash.h
++ scripts/mysqlaccess.sh
++ scripts/mysql_fix_extensions.sh
++ scripts/mysql_setpermission.sh
++ storage/myisam/ftbench/ft-test-run.sh
++ storage/myisam/mi_test_all.sh
++ strings/ctype-uca.c
++ strings/ctype-uca.h
++ strings/ctype-uca1400.h
++ strings/ctype-uca-scanner_next.inl
++ strings/ctype-ucs2.c
++ strings/ctype-unidata.c
++ strings/ctype-utf8.c
++ support-files/MacOSX/postflight.sh
++ support-files/MacOSX/preflight.sh
++ mysql-test/lib/My/ConfigFactory.pm
++ BUILD/*.sh
++ BUILD/compile-solaris-amd64
++ BUILD/compile-amd64-valgrind-max
++ BUILD/compile-pentium64-max
++ BUILD/compile-pentium64
++ scripts/mysqlhotcopy.sh
++ scripts/mysqld_multi.sh
++ mysql-test/std_data/checkDBI_DBD-MariaDB.pl
++Copyright: 2000-2013 Oracle and/or its affiliates
++ 2000-2007 MySQL AB
++ 2009 Sun Microsystems Inc
++ 2009, 2018, 2020-2021, MariaDB
++License: LGPL-2
++
++Files: BUILD/util.sh
++Copyright: 2010 Kristian Nielsen and Monty Program AB
++License: GPL-2
++
++Files: sql-bench/innotest1.sh
++ sql-bench/innotest1a.sh
++ sql-bench/innotest1b.sh
++ sql-bench/innotest2.sh
++ sql-bench/innotest2a.sh
++ sql-bench/innotest2b.sh
++Copyright: 2000-2002 Innobase Oy & MySQL AB
++Comment: These files fall under the blanket license specified in the file COPYING
++License: GPL-2
++
++Files: storage/myisam/rt_index.h
++ storage/myisam/rt_key.*
++ storage/myisam/rt_mbr.*
++ storage/myisam/sp_defs.h
++Copyright:
++ 2000,2002-2007 MySQL AB
++ Ramil Kalimullin
++License: GPL-2
++
++Files: strings/ctype-bin.c
++ strings/ctype-eucjpms.c
++ strings/ctype-ujis.c
++Copyright:
++ 2000,2002,2005-2011 Oracle and/or its affiliates
++ tommy@valley.ne.jp
++License: LGPL-2
++
++Files: scripts/galera_new_cluster.sh
++ storage/connect/inihandl.cpp
++Copyright: 1993 Miguel de Icaza
++ 1996 Alexandre Julliard
++ MariaDB Foundation
++License: LGPL-2.1+
+
- The MariaDB packages were initially made by http://ourdelta.org/, and
- are now managed by the MariaDB development team, developers@lists.mariadb.org
++Files: scripts/mysqld_safe.sh
++ support-files/mysql-multi.server.sh
++ support-files/mysql.server.sh
++Copyright: 1996 Abandoned TCX DataKonsult AB & Monty Program KB & Detron HB
++License: public-domain
+
- MariaDB can be downloaded from https://downloads.mariadb.org/
++Files: storage/innobase/include/pars0grm.h storage/innobase/pars/pars0grm.cc
++Copyright: 1995-2009 Innobase Oy.
++ 1984,1989-1990,2000-2004 Free Software Foundation Inc.
++License: GPL-2+-with-bison-exception
+
++Files: storage/innobase/fts/fts0pars.cc
++ storage/innobase/include/fts0pars.h
++Copyright: 1984, 1989-1990, 2000-2006 Free Software Foundation, Inc.
++License: GPL-3+-with-bison-exception
++
++Files: include/t_ctype.h
++ strings/t_ctype.h
++Copyright: 2000 MySQL AB
++ 1998 Theppitak Karoonboonyanan
++ 1998-1999 Pruet Boonma
++License: GPL-2
++
++Files: strings/strend.c
++Copyright: Richard A. O'Keefe.
++ 2000 TXT DataKonsult Ab & Monty Program Ab
++ 2009-2011, Monty Program Ab
++License: BSD-2-clause
++
++Files: dbug/dbug.c
++ dbug/dbug_long.h
++Copyright: 1987 Abandoned Fred Fish
++License: public-domain
++
++Files: scripts/dheadgen.pl
++Copyright: 2008-2009 Sun Microsystems Inc
++License: BSD-3-clause
++
++Files: plugin/handler_socket/*
++Copyright:
++ 2010 DeNA Co.,Ltd.
++License: BSD-3-clause
++
++Files: plugin/auth_gssapi/*
++Copyright: 2015 Shuang Qiu
++ 2015 Robbie Harwood
++License: BSD-2-clause
++
++Files: plugin/file_key_management/*
++Copyright: 2002-2012 eperi GmbH
++License: GPL-2
++
++Files: storage/mroonga/*
++Copyright: 2011-2015 Kouhei Sutou <kou@clear-code.com>
++ 2011-2013 Kentoku SHIBA
++ 2010 Tetsuro IKEDA
++ 2014 Kenji Maruyama <mmmaru777@gmail.com>
++ 2014-2015 Naoya Murakami <naoya@createfield.com>
++License: LGPL-2.1+
++
++Files: storage/mroonga/vendor/groonga/vendor/plugins/groonga-normalizer-mysql/*
++Copyright: 2009-2015 Brazil
++License: LGPL-2.1+
++
++Files: storage/spider/*
++Copyright: 2008-2015 Kentoku Shiba
++License: GPL-2
++
++Files: strings/ctype-win1250ch.c
++Copyright: 2002-2010 Oracle and/or its affiliates.
++ 2001 Jan Pazdziora
++License: GPL-2
++
++Files: strings/ctype-tis620.c
++Copyright: 1998 Theppitak Karoonboonyanan <thep@links.nectec.or.th>
++ 1989-1991 Samphan Raruenrom <samphan@thai.com>
++ 2000-2010 Oracle and/or its affiliates.
++ 2003 Sathit Jittanupat
++ 2001 Korakot Chaovavanich <korakot@iname.com> and
++ 1998-1999 Pruet Boonma <pruet@eng.cmu.ac.th>
++License: GPL-2
++
++Files: storage/innobase/handler/ha_innodb.h
++Copyright: 2000-2010 MySQL AB & Innobase Oy.
++License: GPL-2
++
++Files: strings/dtoa.c
++Copyright: 2007-2012 Oracle and/or its affiliates.
++ 1991,2000-2001 Lucent Technologies
++ 2017, 2020, MariaDB Corporation
++License: LGPL-2
++
++Files: scripts/mysqldumpslow.sh
+Copyright:
++ 2000-2002,2005-2008 MySQL AB
++ 2008-2009 Sun Microsystems Inc
++ 2000, 2017, Oracle and/or its affiliates
++License: LGPL-2
++
++Files: libmysqld/lib_sql.cc
++Copyright: 2000 SWsoft company
++License: SWsoft
++ This material is provided "as is", with absolutely no warranty expressed
++ or implied. Any use is at your own risk.
++ .
++ Permission to use or copy this software for any purpose is hereby granted
++ without fee, provided the above notices are retained on all copies.
++ Permission to modify the code and to distribute modified code is granted,
++ provided the above notices are retained, and a notice that the code was
++ modified is included with the above copyright notice.
++
++Files: tests/mail_to_db.pl
++Copyright: 1998 Abandoned TCX DataKonsult AB & Monty Program KB & Detron HB
++License: public-domain
++
++Files: scripts/mysqlaccess.conf
++Copyright: 1997, Yves.Carlier@rug.ac.be
++License: GPL-2
++
++Files: debian/additions/innotop/*
++Copyright: 2006-2009, Baron Schwartz <baron@xaprb.com>
++License: GPL-2 or Artistic
++
++Files: include/mysql_version.h.in
++Copyright: 1996, 1999, 2001 MySQL AB
++License: public-domain
++
++Files: storage/federatedx/*
++Copyright:
++ 2007 Antony T Curtis
++ 2008-2009 Patrick Galbraith
++License: BSD-3-clause
++
++Files: cmake/systemd.cmake
++ scripts/mariadb-service-convert
++Copyright: 2015 Daniel Black
++License: GPL-2
++
++Files: wsrep-lib/*
++ sql/wsrep_*
++ scripts/wsrep_*
++Copyright: 2008-2019 Codership Oy <https://galeracluster.com/>
++License: GPL-2
++
++Files:
++ wsrep-lib/dbsim/db_client.cpp
++ wsrep-lib/dbsim/db_client.hpp
++ wsrep-lib/dbsim/db_client_service.cpp
++ wsrep-lib/dbsim/db_client_service.hpp
++ wsrep-lib/dbsim/db_client_state.hpp
++ wsrep-lib/dbsim/db_high_priority_service.cpp
++ wsrep-lib/dbsim/db_high_priority_service.hpp
++ wsrep-lib/dbsim/db_params.cpp
++ wsrep-lib/dbsim/db_params.hpp
++ wsrep-lib/dbsim/db_server.cpp
++ wsrep-lib/dbsim/db_server.hpp
++ wsrep-lib/dbsim/db_server_service.cpp
++ wsrep-lib/dbsim/db_server_service.hpp
++ wsrep-lib/dbsim/db_server_state.cpp
++ wsrep-lib/dbsim/db_server_state.hpp
++ wsrep-lib/dbsim/db_simulator.cpp
++ wsrep-lib/dbsim/db_simulator.hpp
++ wsrep-lib/dbsim/db_storage_engine.cpp
++ wsrep-lib/dbsim/db_storage_engine.hpp
++ wsrep-lib/dbsim/db_storage_service.hpp
++ wsrep-lib/dbsim/db_threads.cpp
++ wsrep-lib/dbsim/db_threads.hpp
++ wsrep-lib/dbsim/db_tls.cpp
++ wsrep-lib/dbsim/db_tls.hpp
++ wsrep-lib/dbsim/dbsim.cpp
++ wsrep-lib/include/wsrep/allowlist_service.hpp
++ wsrep-lib/include/wsrep/atomic.hpp
++ wsrep-lib/include/wsrep/buffer.hpp
++ wsrep-lib/include/wsrep/chrono.hpp
++ wsrep-lib/include/wsrep/client_id.hpp
++ wsrep-lib/include/wsrep/client_service.hpp
++ wsrep-lib/include/wsrep/client_state.hpp
++ wsrep-lib/include/wsrep/compiler.hpp
++ wsrep-lib/include/wsrep/condition_variable.hpp
++ wsrep-lib/include/wsrep/encryption_service.hpp
++ wsrep-lib/include/wsrep/event_service.hpp
++ wsrep-lib/include/wsrep/exception.hpp
++ wsrep-lib/include/wsrep/gtid.hpp
++ wsrep-lib/include/wsrep/high_priority_service.hpp
++ wsrep-lib/include/wsrep/id.hpp
++ wsrep-lib/include/wsrep/key.hpp
++ wsrep-lib/include/wsrep/lock.hpp
++ wsrep-lib/include/wsrep/logger.hpp
++ wsrep-lib/include/wsrep/mutex.hpp
++ wsrep-lib/include/wsrep/provider.hpp
++ wsrep-lib/include/wsrep/provider_options.hpp
++ wsrep-lib/include/wsrep/reporter.hpp
++ wsrep-lib/include/wsrep/seqno.hpp
++ wsrep-lib/include/wsrep/server_service.hpp
++ wsrep-lib/include/wsrep/server_state.hpp
++ wsrep-lib/include/wsrep/sr_key_set.hpp
++ wsrep-lib/include/wsrep/storage_service.hpp
++ wsrep-lib/include/wsrep/streaming_context.hpp
++ wsrep-lib/include/wsrep/thread.hpp
++ wsrep-lib/include/wsrep/thread_service.hpp
++ wsrep-lib/include/wsrep/tls_service.hpp
++ wsrep-lib/include/wsrep/transaction.hpp
++ wsrep-lib/include/wsrep/transaction_id.hpp
++ wsrep-lib/include/wsrep/version.hpp
++ wsrep-lib/include/wsrep/view.hpp
++ wsrep-lib/include/wsrep/xid.hpp
++ wsrep-lib/scripts/benchmark-provider.sh
++ wsrep-lib/scripts/benchmark-report.sh
++ wsrep-lib/scripts/stress-provider.sh
++ wsrep-lib/src/allowlist_service_v1.cpp
++ wsrep-lib/src/allowlist_service_v1.hpp
++ wsrep-lib/src/client_state.cpp
++ wsrep-lib/src/config_service_v1.cpp
++ wsrep-lib/src/config_service_v1.hpp
++ wsrep-lib/src/event_service_v1.cpp
++ wsrep-lib/src/event_service_v1.hpp
++ wsrep-lib/src/exception.cpp
++ wsrep-lib/src/gtid.cpp
++ wsrep-lib/src/id.cpp
++ wsrep-lib/src/key.cpp
++ wsrep-lib/src/logger.cpp
++ wsrep-lib/src/provider.cpp
++ wsrep-lib/src/provider_options.cpp
++ wsrep-lib/src/reporter.cpp
++ wsrep-lib/src/seqno.cpp
++ wsrep-lib/src/server_state.cpp
++ wsrep-lib/src/service_helpers.hpp
++ wsrep-lib/src/sr_key_set.cpp
++ wsrep-lib/src/streaming_context.cpp
++ wsrep-lib/src/thread.cpp
++ wsrep-lib/src/thread_service_v1.cpp
++ wsrep-lib/src/thread_service_v1.hpp
++ wsrep-lib/src/tls_service_v1.cpp
++ wsrep-lib/src/tls_service_v1.hpp
++ wsrep-lib/src/transaction.cpp
++ wsrep-lib/src/uuid.cpp
++ wsrep-lib/src/uuid.hpp
++ wsrep-lib/src/view.cpp
++ wsrep-lib/src/wsrep_provider_v26.cpp
++ wsrep-lib/src/wsrep_provider_v26.hpp
++ wsrep-lib/src/xid.cpp
++ wsrep-lib/test/buffer_test.cpp
++ wsrep-lib/test/client_state_fixture.hpp
++ wsrep-lib/test/gtid_test.cpp
++ wsrep-lib/test/id_test.cpp
++ wsrep-lib/test/mock_client_state.cpp
++ wsrep-lib/test/mock_client_state.hpp
++ wsrep-lib/test/mock_high_priority_service.cpp
++ wsrep-lib/test/mock_high_priority_service.hpp
++ wsrep-lib/test/mock_provider.hpp
++ wsrep-lib/test/mock_server_state.hpp
++ wsrep-lib/test/mock_storage_service.cpp
++ wsrep-lib/test/mock_storage_service.hpp
++ wsrep-lib/test/nbo_test.cpp
++ wsrep-lib/test/reporter_test.cpp
++ wsrep-lib/test/rsu_test.cpp
++ wsrep-lib/test/server_context_test.cpp
++ wsrep-lib/test/test_utils.cpp
++ wsrep-lib/test/test_utils.hpp
++ wsrep-lib/test/toi_test.cpp
++ wsrep-lib/test/transaction_test.cpp
++ wsrep-lib/test/transaction_test_2pc.cpp
++ wsrep-lib/test/view_test.cpp
++ wsrep-lib/test/wsrep-lib_test.cpp
++ wsrep-lib/test/xid_test.cpp
++ wsrep-lib/wsrep-API/v26/wsrep_allowlist_service.h
++ wsrep-lib/wsrep-API/v26/wsrep_config_service.h
++ wsrep-lib/wsrep-API/v26/wsrep_event_service.h
++ wsrep-lib/wsrep-API/v26/wsrep_membership_service.h
++ wsrep-lib/wsrep-API/v26/wsrep_node_isolation.h
++ wsrep-lib/wsrep-API/v26/wsrep_thread_service.h
++ wsrep-lib/wsrep-API/v26/wsrep_tls_service.h
++Copyright: 2008-2019 Codership Oy <https://galeracluster.com/>
++License: GPL-2+
++
++Files: libmariadb/*
++Copyright:
++ 2000-2012 MySQL AB & MySQL Finland AB & TCX DataKonsult AB
++ 2006-2011 The PHP Group
++ 2012-2013 Monty Program AB
++ 2014-2020 MariaDB Corporation Ab
++ 2014 Kristian Nielsen & MariaDB Corporation
++License: LGPL-2+
++
++Files: libmariadb/cmake/*
++Copyright: 2013-2018 MariaDB Corporation AB
++ 2010, Michael Bell <michael.bell@web.de>
++License: BSD-3-Clause
++
++Files: libmariadb/libmariadb/mariadb_dyncol.*
++Copyright:
++ 2011-2012 Oleksandr Byelkin
++ 2011-2013 Monty Program Ab
++License: BSD-2-clause
++
++Files: libmariadb/libmariadb/ma_dtoa.*
++Copyright:
++ 1991, 2000-2001, Lucent Technologies
++ 2007, 2012, Oracle and/or its affiliates.
++ 2016, 2022, MariaDB Corporation
++License: LGPL-2
++
++Files: libmariadb/unittest/libmariadb/getopt.*
++Copyright:
++ 1989-1994, Free Software Foundation, Inc
++License: LGPL-2+
++
++Files: storage/archive/azio.c
++ storage/archive/azlib.h
++ zlib/*
++Copyright:
++ 1995-2005 Jean-loup Gailly
++ 1995-2005 Mark Adler
++License: zlib/libpng
++
++Files: mysys/CMakeLists.txt
++Copyright: 2006, 2014, Oracle and/or its affiliates
++License: GPL-2
++
++Files: plugin/server_audit/CMakeLists.txt
++Copyright: 2013 Alexey Botchkov and SkySQL Ab
++License: GPL-2
++
++Files: zlib/CMakeLists.txt
++Copyright: 2006, 2014, Oracle and/or its affiliates
++License: GPL-2
++
++License: GPL-2
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; version 2 of the License.
++ .
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++ .
++ You should have received a copy of the GNU General Public License
++ along with this program. If not, see <https://www.gnu.org/licenses/>.
++Comment:
++ On Debian systems, the complete text of the GNU General Public
++ License version 2 can be found in `/usr/share/common-licenses/GPL-2`.
++
++License: GPL-2+
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++ .
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++ .
++ You should have received a copy of the GNU General Public License
++ along with this program. If not, see <https://www.gnu.org/licenses/>.
++Comment:
++ On Debian systems, the complete text of the GNU General Public
++ License version 2 can be found in `/usr/share/common-licenses/GPL-2`.
++
++License: GPL-2+-with-bison-exception
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2, or (at your option)
++ any later version.
++ .
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++ .
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, see <https://www.gnu.org/licenses/>.
++ .
++ As a special exception, you may create a larger work that contains
++ part or all of the Bison parser skeleton and distribute that work
++ under terms of your choice, so long as that work isn't itself a
++ parser generator using the skeleton or a modified version thereof
++ as a parser skeleton. Alternatively, if you modify or redistribute
++ the parser skeleton itself, you may (at your option) remove this
++ special exception, which will cause the skeleton and the resulting
++ Bison output files to be licensed under the GNU General Public
++ License without this special exception.
++ .
++ This special exception was added by the Free Software Foundation in
++ version 2.2 of Bison.
+
- According to the file "COPYING" all parts of this package are licenced
- under the terms of the GNU GPL Version 2 of which a copy is available
- in /usr/share/common-licenses.
++License: GPL-3+-with-bison-exception
++ This program is free software: you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation, either version 3 of the License, or
++ (at your option) any later version.
++ .
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++ .
++ You should have received a copy of the GNU General Public License
++ along with this program. If not, see <https://www.gnu.org/licenses/>.
++ .
++ As a special exception, you may create a larger work that contains
++ part or all of the Bison parser skeleton and distribute that work
++ under terms of your choice, so long as that work isn't itself a
++ parser generator using the skeleton or a modified version thereof
++ as a parser skeleton. Alternatively, if you modify or redistribute
++ the parser skeleton itself, you may (at your option) remove this
++ special exception, which will cause the skeleton and the resulting
++ Bison output files to be licensed under the GNU General Public
++ License without this special exception.
++ .
++ This special exception was added by the Free Software Foundation in
++ version 2.2 of Bison.
+
- To allow free software with other licences than the GPL to link against the
- shared library, special terms for "derived works" are granted in the README file of MySQL 5.5, as follows:
++License: LGPL-2
++ This library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Library General Public
++ License as published by the Free Software Foundation; version 2
++ of the License.
++ .
++ This library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Library General Public License for more details.
++ .
++ You should have received a copy of the GNU Library General Public
++ License along with this library; if not, see <https://www.gnu.org/licenses/>.
++Comment:
++ On Debian systems, the complete text of the GNU Library General Public
++ License version 2 can be found in "/usr/share/common-licenses/LGPL-2".
+
- > MySQL FOSS License Exception
- > We want free and open source software applications under certain
- > licenses to be able to use specified GPL-licensed MySQL client
- > libraries despite the fact that not all such FOSS licenses are
- > compatible with version 2 of the GNU General Public License.
- > Therefore there are special exceptions to the terms and conditions
- > of the GPLv2 as applied to these client libraries, which are
- > identified and described in more detail in the FOSS License
- > Exception at
- > <http://www.mysql.com/about/legal/licensing/foss-exception.html>.
++License: LGPL-2+
++ This library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Library General Public
++ License as published by the Free Software Foundation; either
++ version 2 of the License, or (at your option) any later version.
++ .
++ This library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Library General Public License for more details.
++ .
++ You should have received a copy of the GNU Library General Public
++ License along with this library; if not, see <https://www.gnu.org/licenses>.
++Comment:
++ On Debian systems, the complete text of the GNU Library General Public
++ License version 2 can be found in "/usr/share/common-licenses/LGPL-2".
+
- The manual had to be removed as it is not free in the sense of the
- Debian Free Software Guidelines (DFSG).
++License: LGPL-2.1+
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU Lesser General Public License as published by
++ the Free Software Foundation; either version 2.1, or (at your option)
++ any later version.
++ .
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU Lesser General Public License for more details.
++ .
++ You should have received a copy of the GNU Lesser General Public License along
++ with this program; if not, see <https://www.gnu.org/licenses/>.
++Comment:
++ On Debian systems, the complete text of the GNU Library General Public
++ License version 2.1 can be found in `/usr/share/common-licenses/LGPL-2.1`.
+
++License: BSD-2-Clause
++ Redistribution and use in source and binary forms, with or without
++ modification, are permitted provided that the following conditions are
++ met:
++ .
++ 1. Redistributions of source code must retain the above copyright
++ notice, this list of conditions and the following disclaimer.
++ .
++ 2. Redistributions in binary form must the following disclaimer in
++ the documentation and/or other materials provided with the
++ distribution.
+
- == innotop ==
++License: BSD-3-clause
++ Redistribution and use in source and binary forms, with or without
++ modification, are permitted provided that the following conditions
++ are met:
++ 1. Redistributions of source code must retain the above copyright
++ notice, this list of conditions and the following disclaimer.
++ 2. Redistributions in binary form must reproduce the above copyright
++ notice, this list of conditions and the following disclaimer in the
++ documentation and/or other materials provided with the distribution.
++ 3. Neither the name of the University nor the names of its contributors
++ may be used to endorse or promote products derived from this software
++ without specific prior written permission.
+
- Copyright 2006-2009, Baron Schwartz <baron@xaprb.com>
- URL: http://innotop.sourceforge.net
++License: Artistic
++ THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
++ WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
++ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
++Comment:
++ On Debian systems, the complete text of the Artistic License can be
++ found in `/usr/share/common-licenses/Artistic`.
+
- License:
- > This software is dual licensed, either GPL version 2 or Artistic License.
- >
- > This package is free software; you can redistribute it and/or modify
- > it under the terms of the GNU General Public License as published by
- > the Free Software Foundation; either version 2 of the License, or
- > (at your option) any later version.
- >
- > This package is distributed in the hope that it will be useful,
- > but WITHOUT ANY WARRANTY; without even the implied warranty of
- > MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- > GNU General Public License for more details.
- >
- > You should have received a copy of the GNU General Public License
- > along with this package; if not, write to the Free Software
- > Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1335 USA
++License: zlib/libpng
++ This software is provided 'as-is', without any express or implied
++ warranty. In no event will the authors be held liable for any damages
++ arising from the use of this software.
++ .
++ Permission is granted to anyone to use this software for any purpose,
++ including commercial applications, and to alter it and redistribute it
++ freely, subject to the following restrictions:
++ .
++ 1. The origin of this software must not be misrepresented; you must not
++ claim that you wrote the original software. If you use this software
++ in a product, an acknowledgment in the product documentation would be
++ appreciated but is not required.
++ 2. Altered source versions must be plainly marked as such, and must not be
++ misrepresented as being the original software.
++ 3. This notice may not be removed or altered from any source distribution.
+
- On Debian systems, the complete text of the GNU General Public License and the
- Artistic License can be found in `/usr/share/common-licenses/'.
++License: public-domain
++ The work is public domain (no license).
--- /dev/null
- # Ignore requirement to use branch name 'master' to make it easier
- # for contributors to work with feature and bugfix branches
- # to Debian packaging
+[DEFAULT]
++# DEP-14 format
++debian-branch = debian/latest
++# These options are used for upstream tarball imports, with each import done on
++# branch 'upstream/latest' and tagged 'upstream/%(version)s'. Older upstream
++# releases should be imported to branches like `upstream/10.11` or
++# `upstream/10.6`.
++upstream-branch = upstream/latest
++upstream-tag = upstream/%(version)s
++
++# Ensure we always target Debian on Debian branches
++dch-opt = --vendor=debian
++
++# Always use pristine tar
++pristine-tar = True
++
++# MariaDB has submodules
++submodules = True
++
++# This git repository also hosts the actual upstream tags and main branch '11.8'.
++# Configure the upstream tag format below, so that `gbp import-orig` will run
++# correctly, and link tarball import branch (`upstream/latest`) with the
++# equivalent upstream release tag, showing a complete audit trail of what
++# upstream released and what was imported into Debian.
++upstream-vcs-tag = mariadb-%(version)s
++
++# If upstream publishes tarball signatures, git-buildpackage will by default
++# import and use the them. Change this to 'on' to make 'gbp import-orig' abort
++# if the signature is not found or is not valid.
++upstream-signatures = on
++
++# Ensure the Debian maintainer signs git tags automatically
++sign-tags = True
++
++# Ease dropping / adding patches
++patch-numbers = False
++
++# Group debian/changelog entries with the same "[ Author ]" instead of making
++# multiple ones for the same author
++multimaint-merge = True
++
++# Lax requirement to use branch name 'debian/latest' so that git-buildpackage
++# will always build using the currently checked out branch as the Debian branch.
++# This makes it easier for contributors to work with feature and bugfix
++# branches.
+ignore-branch = True
++
++# Automatically open a new changelog entry about the new upstream release, but
++# do not commit it, as the 'gbp dch' still needs to run and list all commits
++# based on when the debian/changelog last was updated in a git commit
++postimport = dch -v %(version)s "New upstream release"
++
++# Ensure a human always reviews all the debian/changelog entries
++spawn-editor = always
++
++# No need to confirm package name or version at any time, git-buildpackage
++# always gets it right
++interactive = False
++
++# If this package ever needs to be maintained for Ubuntu, remember to override
++# the branch, tag and commit messages
++#debian-branch = ubuntu/24.04-noble
++#debian-tag = ubuntu/%(version)s
++#debian-tag-msg = %(pkg)s Ubuntu release %(version)s
++#dch-opt = --vendor=ubuntu
--- /dev/null
- #!/usr/bin/dh-exec
+usr/bin/mariadb_config usr/bin/mysql_config
+usr/include/mariadb usr/include/mysql
+usr/lib/${DEB_HOST_MULTIARCH}/pkgconfig/libmariadb.pc usr/lib/${DEB_HOST_MULTIARCH}/pkgconfig/mysqlclient.pc
--- /dev/null
- usr/include/mariadb/mariadb/
+usr/bin/mariadb-config
+usr/bin/mariadb_config
+usr/include/mariadb/errmsg.h
+usr/include/mariadb/ma_list.h
+usr/include/mariadb/ma_pvio.h
+usr/include/mariadb/ma_tls.h
+usr/include/mariadb/mariadb/ma_io.h
+usr/include/mariadb/mariadb_com.h
+usr/include/mariadb/mariadb_ctype.h
+usr/include/mariadb/mariadb_dyncol.h
+usr/include/mariadb/mariadb_rpl.h
+usr/include/mariadb/mariadb_stmt.h
+usr/include/mariadb/mariadb_version.h
+usr/include/mariadb/my_alloca.h
+usr/include/mariadb/my_config.h
+usr/include/mariadb/my_global.h
+usr/include/mariadb/my_sys.h
+usr/include/mariadb/mysql.h
+usr/include/mariadb/mysql/
+usr/include/mariadb/mysql/client_plugin.h
+usr/include/mariadb/mysql/plugin_auth.h
+usr/include/mariadb/mysql_com.h
+usr/include/mariadb/mysql_version.h
+usr/include/mariadb/mysqld_error.h
+usr/lib/*/libmariadb.a
+usr/lib/*/libmariadb.so
+usr/lib/*/libmariadbclient.a
+usr/lib/*/libmariadbclient.so
+usr/lib/*/libmysqlservices.a
+usr/lib/*/pkgconfig/libmariadb.pc
++usr/lib/*/pkgconfig/mariadb.pc
+usr/share/aclocal/mysql.m4
+usr/share/man/man1/mariadb_config.1
+usr/share/man/man1/mysql_config.1
+usr/share/man/man3/*.3
--- /dev/null
- # Needed conflict
- conflicts-with-version libmariadb-dev-compat (<< 3.0.0)
-
- # This is intended one
++# This is how upstream does it, wont' fix
+repeated-path-segment mariadb [usr/include/mariadb/mariadb/]
-
- # These are handled when groff messages are corrected
- typo-in-manual-page handshak handshake [usr/share/man/man3/mariadb_get_infov.3.gz:173]
- typo-in-manual-page occured occurred [usr/share/man/man3/mysql_ping.3.gz:39]
- typo-in-manual-page occured occurred [usr/share/man/man3/mysql_set_character_set.3.gz:37]
- typo-in-manual-page occured occurred [usr/share/man/man3/mysql_stmt_error.3.gz:30]
- typo-in-manual-page occured occurred [usr/share/man/man3/mysql_stmt_reset.3.gz:27]
- typo-in-manual-page occured occurred [usr/share/man/man3/mysql_store_result.3.gz:34]
- typo-in-manual-page releated related [usr/share/man/man3/mariadb_get_infov.3.gz:8]
- typo-in-manual-page reponse response [usr/share/man/man3/mysql_send_query.3.gz:8]
- typo-in-manual-page seperated separated [usr/share/man/man3/mysql_real_connect.3.gz:144]
- typo-in-manual-page seperated separated [usr/share/man/man3/mysql_real_connect.3.gz:148]
- typo-in-manual-page sucess success [usr/share/man/man3/mariadb_reconnect.3.gz:25]
-
- # Probably fixed in newer pandoc
- # man pages should be regenerated
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mysql_stmt_attr_set.3.gz:20]
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mysql_real_connect.3.gz:18]
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mysql_set_character_set.3.gz:5]
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mysql_set_server_option.3.gz:4]
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mariadb_rpl_get_optionsv.3.gz:4]
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mariadb_rpl_optionsv.3.gz:4]
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mysql_info.3.gz:10]
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mysql_refresh.3.gz:13]
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mysql_optionsv.3.gz:48]
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mysql_stmt_attr_get.3.gz:20]
- groff-message an.tmac:<standard input>:*: tbl preprocessor failed, or it or soelim was not run; table(s) likely not rendered (TE macro called with TW register undefined) [usr/share/man/man3/mariadb_get_infov.3.gz:43]
-
- # Until man pages are regenerated they just pollute
- # lintian output
- # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1043256
- # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1041809
- # https://github.com/jgm/pandoc/issues/9020
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:45]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:16]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:51]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:46]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:17]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:52]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:21]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:22]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:47]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:53]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:54]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_cancel.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_check.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_cmp_named.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_count.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_exists_named.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_exists_num.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_free.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_named.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_num.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_reconnect.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_close.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_fetch.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_open.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_stmt_fetch_fields.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_autocommit.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_change_user.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_close.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_commit.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_data_seek.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_field_direct.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_fields.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_row.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_field_seek.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_field_tell.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_free_result.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_character_set_info.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_client_version.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_host_info.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_proto_info.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_server_info.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_server_version.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_ssl_cipher.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_hex_string.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_init.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_kill.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_more_results.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_next_result.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_num_fields.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_num_rows.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_query.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_read_query_result.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_query.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_reset_connection.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_rollback.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_row_seek.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_row_tell.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_select_db.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_server_end.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_server_init.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_shutdown.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_sqlstate.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_ssl_set.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stat.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_bind_param.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_bind_result.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_close.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_errno.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_execute.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch_column.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_field_count.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_init.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_param_count.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_param_metadata.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_prepare.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_reset.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_row_seek.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_row_tell.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_send_long_data.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_store_result.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_thread_end.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_thread_id.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_thread_init.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_use_result.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_warning_count.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:48]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:55]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:49]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_connection.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_named.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_num.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_named.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_num.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_get_optionsv.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_optionsv.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_stmt_execute_direct.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_affected_rows.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_errno.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_error.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_field.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_lengths.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_field_count.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_client_info.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_socket.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_info.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_options.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_options4.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_ping.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_escape_string.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_send_query.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_set_character_set.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_set_server_option.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_affected_rows.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_data_seek.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_error.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_free_result.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_insert_id.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_more_results.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_next_result.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_num_rows.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_result_metadata.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_sqlstate.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_store_result.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_warning_count.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:56]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:57]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:50]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:58]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:51]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:59]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:60]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:52]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:61]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:62]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:63]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:64]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:53]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:19]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:20]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:65]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:54]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:66]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:55]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:67]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:56]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:68]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:57]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:69]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:58]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:70]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:59]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:71]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:60]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_reconnect.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_server_info.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_init.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:61]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:72]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_check.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_get_optionsv.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_optionsv.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_field_direct.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_lengths.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_row.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_info.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_insert_id.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:62]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:73]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:63]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:74]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_cancel.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_cmp_named.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_affected_rows.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_init.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_shutdown.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_param_count.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:64]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:75]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:65]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_cancel.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_exists_named.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_exists_num.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_free.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_free.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_close.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_fetch.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_open.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_affected_rows.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_affected_rows.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_affected_rows.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_close.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_field_direct.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_lengths.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_proto_info.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_server_info.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_server_version.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_hex_string.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_init.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_num_fields.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_num_rows.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_init.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_insert_id.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_reset.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_sqlstate.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_warning_count.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:76]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:66]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_connection.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_get_optionsv.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_optionsv.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_autocommit.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_commit.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_free_result.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_host_info.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_socket.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_ssl_cipher.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_more_results.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_read_query_result.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_rollback.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stat.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_errno.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_free_result.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_insert_id.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_param_metadata.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_thread_id.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_warning_count.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:67]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:77]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:68]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:78]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_cancel.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_cmp_named.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_count.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_count.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_exists_named.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_exists_num.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_field_direct.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_character_set_info.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_info.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_num_rows.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_options.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_row_seek.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_row_tell.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_select_db.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_set_server_option.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_bind_result.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_close.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_more_results.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_param_count.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_prepare.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_row_seek.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_row_tell.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:69]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:79]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:70]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_check.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_check.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_free.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_num.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_stmt_fetch_fields.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_data_seek.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_errno.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_error.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_field_seek.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_field_tell.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_hex_string.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_init.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_init.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_options4.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_query.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_server_end.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_bind_param.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_data_seek.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_error.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_execute.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_field_count.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_next_result.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:80]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:81]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:71]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:82]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:83]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_cmp_named.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_count.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_free.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_named.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_named.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_fetch.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_affected_rows.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_field.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_fields.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_lengths.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_row.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_client_version.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_next_result.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_num_rows.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_query.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_send_query.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_server_end.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_shutdown.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_affected_rows.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch_column.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_num_rows.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_result_metadata.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_send_long_data.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_send_long_data.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_store_result.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:72]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:84]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:73]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:85]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_exists_named.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_exists_num.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_num.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_named.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_num.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_fetch.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_stmt_execute_direct.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_autocommit.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_hex_string.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_row_seek.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_set_character_set.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_bind_result.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_init.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_init.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_param_metadata.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_prepare.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_row_seek.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:74]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:86]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:75]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:87]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_cancel.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_check.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_named.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_num.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_exists_named.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_exists_num.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_reconnect.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_fetch.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_data_seek.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_lengths.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_field_count.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_field_seek.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_character_set_info.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_character_set_info.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_host_info.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_ssl_cipher.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_kill.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_select_db.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_set_server_option.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_bind_param.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_bind_param.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_data_seek.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_use_result.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:76]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:88]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_check.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_named.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_named.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_num.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_open.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_hex_string.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_init.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_ping.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_escape_string.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_query.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch_column.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_prepare.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_send_long_data.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_store_result.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_warning_count.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:89]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:77]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_cmp_named.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_count.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_named.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_num.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_num.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_stmt_execute_direct.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_errno.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_error.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_field_direct.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_field_direct.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_lengths.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_row.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_field_seek.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_field_seek.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_info.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_query.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_send_query.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_server_end.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_server_init.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_set_character_set.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_shutdown.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_affected_rows.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_reset.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_warning_count.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:90]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:91]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:78]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_cmp_named.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_named.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_named.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_num.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_reconnect.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_close.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_affected_rows.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_change_user.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_errno.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_error.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_row.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_server_info.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_query.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_shutdown.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_errno.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch_column.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_init.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_warning_count.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:92]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_named.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_num.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_stmt_execute_direct.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_autocommit.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_select_db.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_send_query.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_affected_rows.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_errno.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_field_count.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_send_long_data.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_warning_count.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:93]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:94]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_column_count.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_named.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_num.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_row.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_field_count.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_init.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_kill.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_more_results.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_escape_string.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_server_init.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_set_character_set.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_error.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch_column.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:95]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_named.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_num.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_named.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_num.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_fields.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_init.3.gz:10]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_server_init.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_ssl_set.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_error.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:96]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_change_user.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_reset_connection.3.gz:2]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:97]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_cancel.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_named.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_named.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_num.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_num.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_named.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_num.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_error.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_affected_rows.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_send_long_data.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:98]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_affected_rows.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_change_user.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_field.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_row.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_ssl_cipher.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_kill.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_ssl_set.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:99]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:100]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:101]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_named.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_num.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_list_num.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_ssl_cipher.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_escape_string.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_send_query.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_send_long_data.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:102]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:103]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:104]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:105]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:106]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_change_user.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_fetch_row.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_ssl_cipher.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_kill.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_ssl_set.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:107]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:108]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_named.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_create_many_num.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_named.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_update_many_num.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:109]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:10]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_autocommit.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_escape_string.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_escape_string.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_select_db.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_ssl_set.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_fetch.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_use_result.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_fetch.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:3]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_stmt_execute_direct.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_get_ssl_cipher.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_ssl_set.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:11]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:12]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:4]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_send_long_data.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_dyncol_unpack.3.gz:13]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:10]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_ssl_set.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:11]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_info.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:12]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:10]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:13]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:11]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:14]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:10]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:11]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:12]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:13]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_info.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:12]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:13]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:15]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_change_user.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:14]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:15]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:10]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_ssl_set.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:16]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:17]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:16]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_select_db.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:11]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:18]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_autocommit.3.gz:6]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_info.3.gz:7]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:17]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_next.3.gz:14]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:18]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:12]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:19]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:13]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:10]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:20]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_info.3.gz:8]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:19]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:14]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:15]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:21]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:11]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:20]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:21]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:12]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:10]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:22]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:23]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:11]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:22]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:24]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:25]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_info.3.gz:9]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:26]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:27]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:13]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:23]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:24]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:28]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:29]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:12]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:25]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:26]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:30]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:31]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:10]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:14]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:27]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:28]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:32]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:33]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_session_track_get_first.3.gz:16]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:13]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:29]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:34]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:35]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:30]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:36]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:37]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:10]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:31]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_get_optionsv.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:38]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:39]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:32]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:40]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:41]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:11]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:33]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_rpl_optionsv.3.gz:5]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:42]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:15]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:34]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:43]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:14]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:35]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:44]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:45]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:11]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:16]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:15]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:12]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_init.3.gz:1]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:36]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:37]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:46]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:17]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:12]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:18]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:38]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:39]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:47]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_get.3.gz:19]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:16]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:40]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:13]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_refresh.3.gz:14]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:17]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:41]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:49]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:42]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:14]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:18]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_optionsv.3.gz:50]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_stmt_attr_set.3.gz:19]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mariadb_get_infov.3.gz:44]
- groff-message troff:<standard input>:*: cannot select font 'C' [usr/share/man/man3/mysql_real_connect.3.gz:15]
++# Man page syntax needs to be fixed upstream
++groff-message troff:<standard input>:*: warning [*]: cannot adjust line [usr/share/man*]
++# mysql_config and mariadb_config location is this by old convention
++development-package-ships-elf-binary-in-path [usr/bin/mariadb_config]
--- /dev/null
- usr/lib/*/libmariadb3/plugin/sha256_password.so
+usr/lib/*/libmariadb.so.*
+usr/lib/*/libmariadb3/plugin/caching_sha2_password.so
+usr/lib/*/libmariadb3/plugin/client_ed25519.so
+usr/lib/*/libmariadb3/plugin/dialog.so
+usr/lib/*/libmariadb3/plugin/mysql_clear_password.so
+usr/lib/*/libmariadb3/plugin/parsec.so
++usr/lib/*/libmariadb3/plugin/sha256_password.so
--- /dev/null
- # Needed conflict
- conflicts-with-version libmariadbclient18 (<< 10.2.0)
++# Most likely false positive
++hardening-no-fortify-functions [usr/lib/*/libmariadb3/plugin/caching_sha2_password.so]
++hardening-no-fortify-functions [usr/lib/*/libmariadb3/plugin/dialog.so]
++hardening-no-fortify-functions [usr/lib/*/libmariadb3/plugin/sha256_password.so]
--- /dev/null
- mariadb_field_attr@libmariadb_3 3.3.1
+libmariadb.so.3 libmariadb3 #MINVER#
+* Build-Depends-Package: libmariadb-dev
+ libmariadb_3@libmariadb_3 3.0.0
+ libmariadb_3_3_5@libmariadb_3_3_5 3.3.5
+ libmariadbclient_18@libmariadbclient_18 3.0.0
+ libmysqlclient_18@libmysqlclient_18 3.0.0
+ ma_pvio_register_callback@libmariadb_3 3.0.0
+ mariadb_cancel@libmariadb_3 3.0.0
+ mariadb_connection@libmariadb_3 3.0.0
+ mariadb_convert_string@libmariadb_3 3.0.0
+ mariadb_deinitialize_ssl@libmariadb_3 3.0.0
- mariadb_rpl_errno@libmariadb_3_3_5 3.3.2
- mariadb_rpl_error@libmariadb_3_3_5 3.3.2
- mariadb_rpl_extract_rows@libmariadb_3_3_5 3.3.2
++ mariadb_field_attr@libmariadb_3 3.1.8
+ mariadb_free_rpl_event@libmariadb_3 3.1.0
+ mariadb_get_charset_by_name@libmariadb_3 3.0.0
+ mariadb_get_charset_by_nr@libmariadb_3 3.0.0
+ mariadb_get_info@libmariadb_3 3.0.0
+ mariadb_get_infov@libmariadb_3 3.0.0
+ mariadb_reconnect@libmariadb_3 3.0.0
+ mariadb_rpl_close@libmariadb_3 3.1.0
- mariadb_rpl_init_ex@libmariadb_3 3.3.0
++ mariadb_rpl_errno@libmariadb_3_3_5 3.3.5
++ mariadb_rpl_error@libmariadb_3_3_5 3.3.5
++ mariadb_rpl_extract_rows@libmariadb_3_3_5 3.3.5
+ mariadb_rpl_fetch@libmariadb_3 3.1.0
+ mariadb_rpl_get_optionsv@libmariadb_3 3.1.0
++ mariadb_rpl_init_ex@libmariadb_3 3.1.13
+ mariadb_rpl_open@libmariadb_3 3.1.0
+ mariadb_rpl_optionsv@libmariadb_3 3.1.0
+ mariadb_stmt_execute_direct@libmariadb_3 3.0.0
+ mariadb_stmt_fetch_fields@libmariadb_3 3.1.0
+ mysql_affected_rows@libmariadbclient_18 3.0.0
+ mysql_affected_rows@libmysqlclient_18 3.0.0
+ mysql_autocommit_cont@libmariadb_3 3.0.0
+ mysql_autocommit@libmariadbclient_18 3.0.0
+ mysql_autocommit@libmysqlclient_18 3.0.0
+ mysql_autocommit_start@libmariadb_3 3.0.0
+ mysql_change_user_cont@libmariadb_3 3.0.0
+ mysql_change_user@libmariadbclient_18 3.0.0
+ mysql_change_user@libmysqlclient_18 3.0.0
+ mysql_change_user_start@libmariadb_3 3.0.0
+ mysql_character_set_name@libmariadbclient_18 3.0.0
+ mysql_character_set_name@libmysqlclient_18 3.0.0
+ mysql_client_find_plugin@libmariadbclient_18 3.0.0
+ mysql_client_find_plugin@libmysqlclient_18 3.0.0
+ mysql_client_register_plugin@libmariadbclient_18 3.0.0
+ mysql_client_register_plugin@libmysqlclient_18 3.0.0
+ mysql_close_cont@libmariadb_3 3.0.0
+ mysql_close@libmariadbclient_18 3.0.0
+ mysql_close@libmysqlclient_18 3.0.0
+ mysql_close_start@libmariadb_3 3.0.0
+ mysql_commit_cont@libmariadb_3 3.0.0
+ mysql_commit@libmariadbclient_18 3.0.0
+ mysql_commit@libmysqlclient_18 3.0.0
+ mysql_commit_start@libmariadb_3 3.0.0
+ mysql_data_seek@libmariadbclient_18 3.0.0
+ mysql_data_seek@libmysqlclient_18 3.0.0
+ mysql_debug@libmariadbclient_18 3.0.0
+ mysql_debug@libmysqlclient_18 3.0.0
+ mysql_dump_debug_info_cont@libmariadb_3 3.0.0
+ mysql_dump_debug_info@libmariadbclient_18 3.0.0
+ mysql_dump_debug_info@libmysqlclient_18 3.0.0
+ mysql_dump_debug_info_start@libmariadb_3 3.0.0
+ mysql_embedded@libmariadbclient_18 3.0.0
+ mysql_embedded@libmysqlclient_18 3.0.0
+ mysql_eof@libmariadbclient_18 3.0.0
+ mysql_eof@libmysqlclient_18 3.0.0
+ mysql_errno@libmariadbclient_18 3.0.0
+ mysql_errno@libmysqlclient_18 3.0.0
+ mysql_error@libmariadbclient_18 3.0.0
+ mysql_error@libmysqlclient_18 3.0.0
+ mysql_escape_string@libmariadbclient_18 3.0.0
+ mysql_escape_string@libmysqlclient_18 3.0.0
+ mysql_fetch_field_direct@libmariadbclient_18 3.0.0
+ mysql_fetch_field_direct@libmysqlclient_18 3.0.0
+ mysql_fetch_field@libmariadbclient_18 3.0.0
+ mysql_fetch_field@libmysqlclient_18 3.0.0
+ mysql_fetch_fields@libmariadbclient_18 3.0.0
+ mysql_fetch_fields@libmysqlclient_18 3.0.0
+ mysql_fetch_lengths@libmariadbclient_18 3.0.0
+ mysql_fetch_lengths@libmysqlclient_18 3.0.0
+ mysql_fetch_row_cont@libmariadb_3 3.0.0
+ mysql_fetch_row@libmariadbclient_18 3.0.0
+ mysql_fetch_row@libmysqlclient_18 3.0.0
+ mysql_fetch_row_start@libmariadb_3 3.0.0
+ mysql_field_count@libmariadbclient_18 3.0.0
+ mysql_field_count@libmysqlclient_18 3.0.0
+ mysql_field_seek@libmariadbclient_18 3.0.0
+ mysql_field_seek@libmysqlclient_18 3.0.0
+ mysql_field_tell@libmariadbclient_18 3.0.0
+ mysql_field_tell@libmysqlclient_18 3.0.0
+ mysql_free_result_cont@libmariadb_3 3.0.0
+ mysql_free_result@libmariadbclient_18 3.0.0
+ mysql_free_result@libmysqlclient_18 3.0.0
+ mysql_free_result_start@libmariadb_3 3.0.0
+ mysql_get_character_set_info@libmariadbclient_18 3.0.0
+ mysql_get_character_set_info@libmysqlclient_18 3.0.0
+ mysql_get_charset_by_name@libmariadbclient_18 3.0.0
+ mysql_get_charset_by_name@libmysqlclient_18 3.0.0
+ mysql_get_charset_by_nr@libmariadbclient_18 3.0.0
+ mysql_get_charset_by_nr@libmysqlclient_18 3.0.0
+ mysql_get_client_info@libmariadbclient_18 3.0.0
+ mysql_get_client_info@libmysqlclient_18 3.0.0
+ mysql_get_client_version@libmariadbclient_18 3.0.0
+ mysql_get_client_version@libmysqlclient_18 3.0.0
+ mysql_get_host_info@libmariadbclient_18 3.0.0
+ mysql_get_host_info@libmysqlclient_18 3.0.0
+ mysql_get_option@libmariadbclient_18 3.0.0
+ mysql_get_option@libmysqlclient_18 3.0.0
+ mysql_get_optionv@libmariadbclient_18 3.0.0
+ mysql_get_optionv@libmysqlclient_18 3.0.0
+ mysql_get_parameters@libmariadbclient_18 3.0.0
+ mysql_get_parameters@libmysqlclient_18 3.0.0
+ mysql_get_proto_info@libmariadbclient_18 3.0.0
+ mysql_get_proto_info@libmysqlclient_18 3.0.0
+ mysql_get_server_info@libmariadbclient_18 3.0.0
+ mysql_get_server_info@libmysqlclient_18 3.0.0
+ mysql_get_server_name@libmariadbclient_18 3.0.0
+ mysql_get_server_name@libmysqlclient_18 3.0.0
+ mysql_get_server_version@libmariadbclient_18 3.0.0
+ mysql_get_server_version@libmysqlclient_18 3.0.0
+ mysql_get_socket@libmariadbclient_18 3.0.0
+ mysql_get_socket@libmysqlclient_18 3.0.0
+ mysql_get_ssl_cipher@libmariadbclient_18 3.0.0
+ mysql_get_ssl_cipher@libmysqlclient_18 3.0.0
+ mysql_get_timeout_value@libmariadb_3 3.0.19
+ mysql_get_timeout_value_ms@libmariadb_3 3.0.19
+ mysql_hex_string@libmariadbclient_18 3.0.0
+ mysql_hex_string@libmysqlclient_18 3.0.0
+ mysql_info@libmariadbclient_18 3.0.0
+ mysql_info@libmysqlclient_18 3.0.0
+ mysql_init@libmariadbclient_18 3.0.0
+ mysql_init@libmysqlclient_18 3.0.0
+ mysql_insert_id@libmariadbclient_18 3.0.0
+ mysql_insert_id@libmysqlclient_18 3.0.0
+ mysql_kill_cont@libmariadb_3 3.0.0
+ mysql_kill@libmariadbclient_18 3.0.0
+ mysql_kill@libmysqlclient_18 3.0.0
+ mysql_kill_start@libmariadb_3 3.0.0
+ mysql_list_dbs@libmariadbclient_18 3.0.0
+ mysql_list_dbs@libmysqlclient_18 3.0.0
+ mysql_list_fields_cont@libmariadb_3 3.0.0
+ mysql_list_fields@libmariadbclient_18 3.0.0
+ mysql_list_fields@libmysqlclient_18 3.0.0
+ mysql_list_fields_start@libmariadb_3 3.0.0
+ mysql_list_processes@libmariadbclient_18 3.0.0
+ mysql_list_processes@libmysqlclient_18 3.0.0
+ mysql_list_tables@libmariadbclient_18 3.0.0
+ mysql_list_tables@libmysqlclient_18 3.0.0
+ mysql_load_plugin@libmariadbclient_18 3.0.0
+ mysql_load_plugin@libmysqlclient_18 3.0.0
+ mysql_load_plugin_v@libmariadbclient_18 3.0.0
+ mysql_load_plugin_v@libmysqlclient_18 3.0.0
+ mysql_more_results@libmariadbclient_18 3.0.0
+ mysql_more_results@libmysqlclient_18 3.0.0
+ mysql_net_field_length@libmariadbclient_18 3.0.0
+ mysql_net_field_length@libmysqlclient_18 3.0.0
+ mysql_net_read_packet@libmariadbclient_18 3.0.0
+ mysql_net_read_packet@libmysqlclient_18 3.0.0
+ mysql_next_result_cont@libmariadb_3 3.0.0
+ mysql_next_result@libmariadbclient_18 3.0.0
+ mysql_next_result@libmysqlclient_18 3.0.0
+ mysql_next_result_start@libmariadb_3 3.0.0
+ mysql_num_fields@libmariadbclient_18 3.0.0
+ mysql_num_fields@libmysqlclient_18 3.0.0
+ mysql_num_rows@libmariadbclient_18 3.0.0
+ mysql_num_rows@libmysqlclient_18 3.0.0
+ mysql_options4@libmariadbclient_18 3.0.0
+ mysql_options4@libmysqlclient_18 3.0.0
+ mysql_options@libmariadbclient_18 3.0.0
+ mysql_options@libmysqlclient_18 3.0.0
+ mysql_optionsv@libmariadb_3 3.0.0
+ mysql_ping_cont@libmariadb_3 3.0.0
+ mysql_ping@libmariadbclient_18 3.0.0
+ mysql_ping@libmysqlclient_18 3.0.0
+ mysql_ping_start@libmariadb_3 3.0.0
+ mysql_ps_fetch_functions@libmariadb_3 3.0.0
+ mysql_query_cont@libmariadb_3 3.0.0
+ mysql_query@libmariadbclient_18 3.0.0
+ mysql_query@libmysqlclient_18 3.0.0
+ mysql_query_start@libmariadb_3 3.0.0
+ mysql_read_query_result_cont@libmariadb_3 3.0.0
+ mysql_read_query_result@libmariadbclient_18 3.0.0
+ mysql_read_query_result@libmysqlclient_18 3.0.0
+ mysql_read_query_result_start@libmariadb_3 3.0.0
+ mysql_real_connect_cont@libmariadb_3 3.0.0
+ mysql_real_connect@libmariadbclient_18 3.0.0
+ mysql_real_connect@libmysqlclient_18 3.0.0
+ mysql_real_connect_start@libmariadb_3 3.0.0
+ mysql_real_escape_string@libmariadbclient_18 3.0.0
+ mysql_real_escape_string@libmysqlclient_18 3.0.0
+ mysql_real_query_cont@libmariadb_3 3.0.0
+ mysql_real_query@libmariadbclient_18 3.0.0
+ mysql_real_query@libmysqlclient_18 3.0.0
+ mysql_real_query_start@libmariadb_3 3.0.0
+ mysql_refresh_cont@libmariadb_3 3.0.0
+ mysql_refresh@libmariadbclient_18 3.0.0
+ mysql_refresh@libmysqlclient_18 3.0.0
+ mysql_refresh_start@libmariadb_3 3.0.0
+ mysql_reset_connection_cont@libmariadb_3 3.0.0
+ mysql_reset_connection@libmariadbclient_18 3.0.0
+ mysql_reset_connection@libmysqlclient_18 3.0.0
+ mysql_reset_connection_start@libmariadb_3 3.0.0
+ mysql_rollback_cont@libmariadb_3 3.0.0
+ mysql_rollback@libmariadbclient_18 3.0.0
+ mysql_rollback@libmysqlclient_18 3.0.0
+ mysql_rollback_start@libmariadb_3 3.0.0
+ mysql_row_seek@libmariadbclient_18 3.0.0
+ mysql_row_seek@libmysqlclient_18 3.0.0
+ mysql_row_tell@libmariadbclient_18 3.0.0
+ mysql_row_tell@libmysqlclient_18 3.0.0
+ mysql_select_db_cont@libmariadb_3 3.0.0
+ mysql_select_db@libmariadbclient_18 3.0.0
+ mysql_select_db@libmysqlclient_18 3.0.0
+ mysql_select_db_start@libmariadb_3 3.0.0
+ mysql_send_query_cont@libmariadb_3 3.0.0
+ mysql_send_query@libmariadbclient_18 3.0.0
+ mysql_send_query@libmysqlclient_18 3.0.0
+ mysql_send_query_start@libmariadb_3 3.0.0
+ mysql_server_end@libmariadbclient_18 3.0.0
+ mysql_server_end@libmysqlclient_18 3.0.0
+ mysql_server_init@libmariadbclient_18 3.0.0
+ mysql_server_init@libmysqlclient_18 3.0.0
+ mysql_session_track_get_first@libmariadbclient_18 3.0.0
+ mysql_session_track_get_first@libmysqlclient_18 3.0.0
+ mysql_session_track_get_next@libmariadbclient_18 3.0.0
+ mysql_session_track_get_next@libmysqlclient_18 3.0.0
+ mysql_set_character_set_cont@libmariadb_3 3.0.0
+ mysql_set_character_set@libmariadbclient_18 3.0.0
+ mysql_set_character_set@libmysqlclient_18 3.0.0
+ mysql_set_character_set_start@libmariadb_3 3.0.0
+ mysql_set_local_infile_default@libmariadbclient_18 3.0.0
+ mysql_set_local_infile_default@libmysqlclient_18 3.0.0
+ mysql_set_local_infile_handler@libmariadbclient_18 3.0.0
+ mysql_set_local_infile_handler@libmysqlclient_18 3.0.0
+ mysql_set_server_option_cont@libmariadb_3 3.0.0
+ mysql_set_server_option@libmariadbclient_18 3.0.0
+ mysql_set_server_option@libmysqlclient_18 3.0.0
+ mysql_set_server_option_start@libmariadb_3 3.0.0
+ mysql_shutdown_cont@libmariadb_3 3.0.0
+ mysql_shutdown@libmariadbclient_18 3.0.0
+ mysql_shutdown@libmysqlclient_18 3.0.0
+ mysql_shutdown_start@libmariadb_3 3.0.0
+ mysql_sqlstate@libmariadbclient_18 3.0.0
+ mysql_sqlstate@libmysqlclient_18 3.0.0
+ mysql_ssl_set@libmariadbclient_18 3.0.0
+ mysql_ssl_set@libmysqlclient_18 3.0.0
+ mysql_stat_cont@libmariadb_3 3.0.0
+ mysql_stat@libmariadbclient_18 3.0.0
+ mysql_stat@libmysqlclient_18 3.0.0
+ mysql_stat_start@libmariadb_3 3.0.0
+ mysql_stmt_affected_rows@libmariadbclient_18 3.0.0
+ mysql_stmt_affected_rows@libmysqlclient_18 3.0.0
+ mysql_stmt_attr_get@libmariadbclient_18 3.0.0
+ mysql_stmt_attr_get@libmysqlclient_18 3.0.0
+ mysql_stmt_attr_set@libmariadbclient_18 3.0.0
+ mysql_stmt_attr_set@libmysqlclient_18 3.0.0
+ mysql_stmt_bind_param@libmariadbclient_18 3.0.0
+ mysql_stmt_bind_param@libmysqlclient_18 3.0.0
+ mysql_stmt_bind_result@libmariadbclient_18 3.0.0
+ mysql_stmt_bind_result@libmysqlclient_18 3.0.0
+ mysql_stmt_close_cont@libmariadb_3 3.0.0
+ mysql_stmt_close@libmariadbclient_18 3.0.0
+ mysql_stmt_close@libmysqlclient_18 3.0.0
+ mysql_stmt_close_start@libmariadb_3 3.0.0
+ mysql_stmt_data_seek@libmariadbclient_18 3.0.0
+ mysql_stmt_data_seek@libmysqlclient_18 3.0.0
+ mysql_stmt_errno@libmariadbclient_18 3.0.0
+ mysql_stmt_errno@libmysqlclient_18 3.0.0
+ mysql_stmt_error@libmariadbclient_18 3.0.0
+ mysql_stmt_error@libmysqlclient_18 3.0.0
+ mysql_stmt_execute_cont@libmariadb_3 3.0.0
+ mysql_stmt_execute@libmariadbclient_18 3.0.0
+ mysql_stmt_execute@libmysqlclient_18 3.0.0
+ mysql_stmt_execute_start@libmariadb_3 3.0.0
+ mysql_stmt_fetch_column@libmariadbclient_18 3.0.0
+ mysql_stmt_fetch_column@libmysqlclient_18 3.0.0
+ mysql_stmt_fetch_cont@libmariadb_3 3.0.0
+ mysql_stmt_fetch@libmariadbclient_18 3.0.0
+ mysql_stmt_fetch@libmysqlclient_18 3.0.0
+ mysql_stmt_fetch_start@libmariadb_3 3.0.0
+ mysql_stmt_field_count@libmariadbclient_18 3.0.0
+ mysql_stmt_field_count@libmysqlclient_18 3.0.0
+ mysql_stmt_free_result_cont@libmariadb_3 3.0.0
+ mysql_stmt_free_result@libmariadbclient_18 3.0.0
+ mysql_stmt_free_result@libmysqlclient_18 3.0.0
+ mysql_stmt_free_result_start@libmariadb_3 3.0.0
+ mysql_stmt_init@libmariadbclient_18 3.0.0
+ mysql_stmt_init@libmysqlclient_18 3.0.0
+ mysql_stmt_insert_id@libmariadbclient_18 3.0.0
+ mysql_stmt_insert_id@libmysqlclient_18 3.0.0
+ mysql_stmt_more_results@libmariadbclient_18 3.0.0
+ mysql_stmt_more_results@libmysqlclient_18 3.0.0
+ mysql_stmt_next_result_cont@libmariadb_3 3.0.0
+ mysql_stmt_next_result@libmariadbclient_18 3.0.0
+ mysql_stmt_next_result@libmysqlclient_18 3.0.0
+ mysql_stmt_next_result_start@libmariadb_3 3.0.0
+ mysql_stmt_num_rows@libmariadbclient_18 3.0.0
+ mysql_stmt_num_rows@libmysqlclient_18 3.0.0
+ mysql_stmt_param_count@libmariadbclient_18 3.0.0
+ mysql_stmt_param_count@libmysqlclient_18 3.0.0
+ mysql_stmt_param_metadata@libmariadbclient_18 3.0.0
+ mysql_stmt_param_metadata@libmysqlclient_18 3.0.0
+ mysql_stmt_prepare_cont@libmariadb_3 3.0.0
+ mysql_stmt_prepare@libmariadbclient_18 3.0.0
+ mysql_stmt_prepare@libmysqlclient_18 3.0.0
+ mysql_stmt_prepare_start@libmariadb_3 3.0.0
+ mysql_stmt_reset_cont@libmariadb_3 3.0.0
+ mysql_stmt_reset@libmariadbclient_18 3.0.0
+ mysql_stmt_reset@libmysqlclient_18 3.0.0
+ mysql_stmt_reset_start@libmariadb_3 3.0.0
+ mysql_stmt_result_metadata@libmariadbclient_18 3.0.0
+ mysql_stmt_result_metadata@libmysqlclient_18 3.0.0
+ mysql_stmt_row_seek@libmariadbclient_18 3.0.0
+ mysql_stmt_row_seek@libmysqlclient_18 3.0.0
+ mysql_stmt_row_tell@libmariadbclient_18 3.0.0
+ mysql_stmt_row_tell@libmysqlclient_18 3.0.0
+ mysql_stmt_send_long_data_cont@libmariadb_3 3.0.0
+ mysql_stmt_send_long_data@libmariadbclient_18 3.0.0
+ mysql_stmt_send_long_data@libmysqlclient_18 3.0.0
+ mysql_stmt_send_long_data_start@libmariadb_3 3.0.0
+ mysql_stmt_sqlstate@libmariadbclient_18 3.0.0
+ mysql_stmt_sqlstate@libmysqlclient_18 3.0.0
+ mysql_stmt_store_result_cont@libmariadb_3 3.0.0
+ mysql_stmt_store_result@libmariadbclient_18 3.0.0
+ mysql_stmt_store_result@libmysqlclient_18 3.0.0
+ mysql_stmt_store_result_start@libmariadb_3 3.0.0
+ mysql_stmt_warning_count@libmariadb_3 3.0.0
+ mysql_store_result_cont@libmariadb_3 3.0.0
+ mysql_store_result@libmariadbclient_18 3.0.0
+ mysql_store_result@libmysqlclient_18 3.0.0
+ mysql_store_result_start@libmariadb_3 3.0.0
+ mysql_thread_end@libmariadbclient_18 3.0.0
+ mysql_thread_end@libmysqlclient_18 3.0.0
+ mysql_thread_id@libmariadbclient_18 3.0.0
+ mysql_thread_id@libmysqlclient_18 3.0.0
+ mysql_thread_init@libmariadbclient_18 3.0.0
+ mysql_thread_init@libmysqlclient_18 3.0.0
+ mysql_thread_safe@libmariadbclient_18 3.0.0
+ mysql_thread_safe@libmysqlclient_18 3.0.0
+ mysql_use_result@libmariadbclient_18 3.0.0
+ mysql_use_result@libmysqlclient_18 3.0.0
+ mysql_warning_count@libmariadbclient_18 3.0.0
+ mysql_warning_count@libmysqlclient_18 3.0.0
--- /dev/null
+usr/include/mariadb/server
+usr/lib/*/libmariadbd.a
+usr/lib/*/libmariadbd.so
+usr/lib/*/libmysqld.a
+usr/lib/*/libmysqld.so
++usr/lib/*/pkgconfig/libmariadbd.pc
++usr/lib/*/pkgconfig/mariadb-embedded-server.pc
--- /dev/null
--- /dev/null
++usr/lib/*/libmariadbd.so.*
--- /dev/null
--- /dev/null
++# MyISAM stopwords that cannot be changed and spelling errors remain
++spelling-error-in-binary noone no one [usr/lib/*/libmariadbd.so.19]
++spelling-error-in-binary thats that's [usr/lib/*/libmariadbd.so.19]
++spelling-error-in-binary theres there's [usr/lib/*/libmariadbd.so.19]
++spelling-error-in-binary yuR your [usr/lib/*/libmariadbd.so.19]
++# False positives from Lintian that finds many short supposedly misspelled words
++# in binaries which don't actually exist in the source code anywhere
++spelling-error-in-binary freeE free [usr/lib/x86_64-linux-gnu/libmariadbd.so.19]
++spelling-error-in-binary IiF If [usr/lib/x86_64-linux-gnu/libmariadbd.so.19]
++# libmariadbd cannot have a symbols file as it would be massively large with all
++# the _ZNK* prefixed symbols leaking
++no-symbols-control-file usr/lib/*/libmariadbd.so.19
++# Probably due to leaking ABI symbols
++exit-in-shared-library [usr/lib/*/libmariadbd.so.19]
--- /dev/null
- # These are from stop word list
- spelling-error-in-binary depricated deprecated [usr/bin/mariadb-backup]
- spelling-error-in-binary explicite explicit [usr/bin/mariadb-backup]
- spelling-error-in-binary noone no one [usr/bin/mariadb-backup]
- spelling-error-in-binary thats that's [usr/bin/mariadb-backup]
- spelling-error-in-binary theres there's [usr/bin/mariadb-backup]
++# MyISAM stopwords that cannot be changed and spelling errors remain
++spelling-error-in-binary noone no one [usr/bin/*]
++spelling-error-in-binary thats that's [usr/bin/*]
++spelling-error-in-binary theres there's [usr/bin/*]
+spelling-error-in-binary yuR your [usr/bin/mariadb-backup]
++# False positives from Lintian that finds many short supposedly misspelled words
++# in binaries which don't actually exist in the source code anywhere
++spelling-error-in-binary freeE free [usr/bin/mariadb-backup]
++spelling-error-in-binary IiF If [usr/bin/mariadb-backup]
--- /dev/null
- usr/bin/mysql
+usr/bin/mysql_convert_table_format
+usr/bin/mysql_find_rows
+usr/bin/mysql_fix_extensions
+usr/bin/mysql_plugin
+usr/bin/mysql_secure_installation
+usr/bin/mysql_setpermission
+usr/bin/mysql_tzinfo_to_sql
+usr/bin/mysql_waitpid
+usr/bin/mysqlaccess
- usr/bin/mysqladmin
+usr/bin/mysqlbinlog
+usr/bin/mysqlcheck
- usr/bin/mysqldump
+usr/bin/mysqldumpslow
+usr/bin/mysqlhotcopy
+usr/bin/mysqlimport
+usr/bin/mysqlshow
+usr/bin/mysqlslap
- usr/share/man/man1/mysql.1
+usr/share/man/man1/mysql_convert_table_format.1
+usr/share/man/man1/mysql_find_rows.1
+usr/share/man/man1/mysql_fix_extensions.1
+usr/share/man/man1/mysql_plugin.1
+usr/share/man/man1/mysql_secure_installation.1
+usr/share/man/man1/mysql_setpermission.1
+usr/share/man/man1/mysql_tzinfo_to_sql.1
+usr/share/man/man1/mysql_waitpid.1
+usr/share/man/man1/mysqlaccess.1
- usr/share/man/man1/mysqladmin.1
+usr/share/man/man1/mysqlbinlog.1
+usr/share/man/man1/mysqlcheck.1
- usr/share/man/man1/mysqldump.1
+usr/share/man/man1/mysqldumpslow.1
+usr/share/man/man1/mysqlhotcopy.1
+usr/share/man/man1/mysqlimport.1
+usr/share/man/man1/mysqlshow.1
+usr/share/man/man1/mysqlslap.1
--- /dev/null
+usr/bin/mariadb
+usr/bin/mariadb-check
+usr/bin/my_print_defaults
++usr/bin/mysql
+usr/share/man/man1/mariadb-check.1
+usr/share/man/man1/mariadb.1
+usr/share/man/man1/my_print_defaults.1
++usr/share/man/man1/mysql.1
--- /dev/null
--- /dev/null
++mariadb (1:11.4.3-1) unstable; urgency=medium
++
++ Fixes related to CVE-2024-21096 may break forwards and backwards
++ compatibility on in certain situations when doing logical backup and restore
++ with plain SQL files (e.g. when using `mariadb-dump` or `mysqldump`).
++
++ The MariaDB client now has the command-line option `--sandbox` and the
++ MariaDB client database prompt command `\-`. This enables sandbox mode for
++ the rest of the session, until disconnected. Once in sandbox mode, any
++ command that could do something on the shell is disabled.
++
++ Additionally `mariadb-dump` now adds the following command inside a comment
++ at the very top of the logical SQL file to trigger sandbox mode:
++
++ /*M!999999\- enable the sandbox mode */
++
++ Newer version of MariaDB clients strip away the backslash and dash (\-), and
++ then tries to execute the internal command with a dash.
++
++ Older versions of MariaDB client and all versions of MySQL client considers
++ this a comment, and will ignore it. There may however be situations where
++ importing logical SQL dump files may fail due to this, so users should be
++ advised.
++
++ Users are best protected from both security issues and interoperability
++ issues by using the latest `mariadb-dump` shipped in MariaDB 11.4.3, 10.11.9,
++ 10.6.19 and 10.5.26. The CVE-2024-21096 was officially fixed already in
++ 11.4.2, but the latest batch of MariaDB minor maintenance releases include
++ further improvements on the sandbox mode.
++
++ Note that the `mariadb-dump` can be used to make the logical backups from
++ both MariaDB and MySQL servers. Also the `mariadb` client program can connect
++ to both MariaDB and MySQL servers and import those SQL dump files.
++
++ Further details about what kind of security issues injecting shell commands
++ into a logical SQL dump may pose and how to protect against them can be found
++ in:
++
++ * https://jfg-mysql.blogspot.com/2024/06/trusting-mysqldump-and-insecure-client-lead-to-remote-code-execution.html
++ * https://mariadb.org/mariadb-dump-file-compatibility-change/
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 06 Aug 2024 22:11:24 +0000
--- /dev/null
+FAQ:
+
+Q: My <tab> completion is gone, why?
+A: You have "no-auto-rehash" in the "[mysql]" section of /etc/mysql/my.cnf!
++
++Q: Some Perl-based tools like innotop, mariadb-report or mytop fail with
++ "Can't locate DBI.pm" or similar errors. What should I install?
++A: The core mariadb-client package only suggests these Perl modules as
++ optional enhancements. Install the following packages if you want to use
++ the advanced Perl clients:
++ - libdbi-perl
++ - libdbd-mariadb-perl (or libdbd-mysql-perl)
++ - libterm-readkey-perl
--- /dev/null
+debian/additions/innotop/innotop usr/bin/
+debian/additions/mariadb-report usr/bin/
+debian/additions/mariadb.conf.d/50-client.cnf etc/mysql/mariadb.conf.d
+debian/additions/mariadb.conf.d/50-mariadb-clients.cnf etc/mysql/mariadb.conf.d
+debian/additions/mariadb.conf.d/60-galera.cnf etc/mysql/mariadb.conf.d
+usr/bin/mariadb-access
+usr/bin/mariadb-admin
+usr/bin/mariadb-binlog
+usr/bin/mariadb-conv
+usr/bin/mariadb-convert-table-format
+usr/bin/mariadb-dump
+usr/bin/mariadb-dumpslow
+usr/bin/mariadb-find-rows
+usr/bin/mariadb-fix-extensions
+usr/bin/mariadb-hotcopy
+usr/bin/mariadb-import
+usr/bin/mariadb-plugin
+usr/bin/mariadb-secure-installation
+usr/bin/mariadb-setpermission
+usr/bin/mariadb-show
+usr/bin/mariadb-slap
+usr/bin/mariadb-tzinfo-to-sql
+usr/bin/mariadb-waitpid
+usr/bin/msql2mysql
++usr/bin/mysqladmin
++usr/bin/mysqldump
+usr/bin/mytop
+usr/bin/perror
+usr/bin/replace
+usr/bin/resolve_stack_dump
+usr/share/man/man1/mariadb-access.1
+usr/share/man/man1/mariadb-admin.1
+usr/share/man/man1/mariadb-binlog.1
+usr/share/man/man1/mariadb-conv.1
+usr/share/man/man1/mariadb-convert-table-format.1
+usr/share/man/man1/mariadb-dump.1
+usr/share/man/man1/mariadb-dumpslow.1
+usr/share/man/man1/mariadb-find-rows.1
+usr/share/man/man1/mariadb-fix-extensions.1
+usr/share/man/man1/mariadb-hotcopy.1
+usr/share/man/man1/mariadb-import.1
+usr/share/man/man1/mariadb-plugin.1
+usr/share/man/man1/mariadb-secure-installation.1
+usr/share/man/man1/mariadb-setpermission.1
+usr/share/man/man1/mariadb-show.1
+usr/share/man/man1/mariadb-slap.1
+usr/share/man/man1/mariadb-tzinfo-to-sql.1
+usr/share/man/man1/mariadb-waitpid.1
+usr/share/man/man1/msql2mysql.1
++usr/share/man/man1/mysqladmin.1
++usr/share/man/man1/mysqldump.1
+usr/share/man/man1/mytop.1
+usr/share/man/man1/perror.1
+usr/share/man/man1/replace.1
+usr/share/man/man1/resolve_stack_dump.1
--- /dev/null
- # Mainly for BSD family to make sure that perl is found
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/bin/mytop]
-
- # Used to determine which shell we have. False-positive situation
- bash-term-in-posix-shell '`echo "testing\c"' [usr/bin/mariadb-secure-installation:191]
-
- # Needed outside conflict
- conflicts-with-version mysql-client (<< 5.0.51)
++# The Innotop changelog has this name for a valid reason
++wrong-name-for-upstream-changelog [usr/share/doc/mariadb-client/changelog.innotop.gz]
++# Man syntax needs to be fixed upstream
++groff-message troff:<standard input>:*: warning: macro 'Table' not defined [usr/share/man*]
--- /dev/null
- #!/bin/bash
++#!/bin/sh
+
+set -e
+
+case "$1" in
+ configure)
++ # Set /etc/mysql/mariadb.cnf as main /etc/mysql/my.cnf alternative if it exists.
++ # As conffile, dpkg does not automatically re-add it if missing on upgrade,
++ # and admins might have intentionally removed it and chose a different my.cnf.
++ if [ ! -f /etc/mysql/mariadb.cnf ]
++ then
++ echo 'Notice: /etc/mysql/mariadb.cnf does not exist, leaving my.cnf untouched'
++ exit 0
++ fi
++
+ # New packaging paradigm for my.cnf handling among MySQL variants
+ # Used in Ubuntu since Dec-2014 and in Debian since Jul-2015
+ #
+ # If the new mysql-common package does not provide
+ # the update-alternatives facility, notify user about manual fall back
+ if [ -f /usr/share/mysql-common/configure-symlinks ]
+ then
+ /usr/share/mysql-common/configure-symlinks install mariadb "/etc/mysql/mariadb.cnf"
+ else
+ # As configure can be called many times, don't re-create the symlink
+ # if it is there already
+ if [ ! -L /etc/mysql/my.cnf ]
+ then
+ echo "Notice: configure-symlinks trigger could not be called."
+ echo "Please manually create symlinks by running: "
+ echo " mv -f /etc/mysql/my.cnf /etc/mysql/my.cnf.old"
+ echo " ln -sf mariadb.cnf /etc/mysql/my.cnf"
+ fi
+ fi
+
+ # Note that MySQL in Debian runs the configure-symlinks from the
+ # mysql-server-x.x.postinst and postrm files, while the MySQL.com (and
+ # Percona.com) packaging triggers update-alternatives directly form the
+ # mysql-common (and percona-x-common) package using priority 200.
+ #
+ # Thus, we need to ensure here that mariadb.cnf indeed became the primary
+ # alternative and override with priority 500 if needed.
+ if ! update-alternatives --query my.cnf | grep --quiet "Value: /etc/mysql/mariadb.cnf"
+ then
- update-alternatives --install /etc/mysql/my.cnf my.cnf "/etc/mysql/mariadb.cnf" 500 || true
++ update-alternatives --install /etc/mysql/my.cnf my.cnf "/etc/mysql/mariadb.cnf" 500
+ fi
+ ;;
+esac
+
+#DEBHELPER#
--- /dev/null
- #!/bin/bash
++#!/bin/sh
+
+set -e
+
+case "$1" in
+ remove|disappear)
+ # New packaging paradigm for my.cnf handling among MySQL variants
+ # Used in Ubuntu since Dec-2014 and in Debian since Jul-2015
+ if [ -f /usr/share/mysql-common/configure-symlinks ]
+ then
+ /usr/share/mysql-common/configure-symlinks remove mariadb "/etc/mysql/mariadb.cnf"
+ fi
+ ;;
+esac
+
+#DEBHELPER#
--- /dev/null
--- /dev/null
++#!/bin/sh
++set -e
++
++if [ "$1" = "install" ] || [ "$1" = "upgrade" ]
++then
++ if dpkg --compare-versions "$2" lt-nl "10.0.20-3~"
++ then
++ # revert fallback my.cnf symlink setup performed by mariadb-common
++ # from 10.0.17-1~exp2 up to 10.0.20-2
++ if [ -L /etc/mysql/my.cnf ] && [ -f /etc/mysql/my.cnf.old ]
++ then
++ if [ "$(readlink /etc/mysql/my.cnf)" = "mariadb.cnf" ]
++ then
++ echo "Reverting my.cnf -> mariadb.cnf symlink setup by mariadb-common"
++ rm /etc/mysql/my.cnf
++ mv /etc/mysql/my.cnf.old /etc/mysql/my.cnf
++ fi
++ fi
++ fi
++fi
++
++#DEBHELPER#
--- /dev/null
--- /dev/null
++# New error that appeared in early February 2026 after some build dependency
++# updated and changed behavior or detection. This is not due to any change in
++# MariaDB itself, and not a regression or bug to fix.
++mariadb-plugin-connect: embedded-library libminizip [usr/lib/mysql/plugin/ha_connect.so]
--- /dev/null
- # This little bit diffrent than MariaDB so needed file
- mariadb-plugin-mroonga: extra-license-file [usr/share/mysql/mroonga/COPYING]
++# False positive from Lintian, these strings are nowhere in test in source code
++spelling-error-in-binary nam name [usr/lib/mysql/plugin/ha_mroonga.so]
++spelling-error-in-binary tage stage [usr/lib/mysql/plugin/ha_mroonga.so]
++# Copyright information in debian/copyright, extra file unnecessary
++extra-license-file [usr/share/mariadb/mroonga/COPYING]
--- /dev/null
- #!/bin/bash
++#!/bin/sh
+
+set -e
+
+# Install Mroonga
- mariadb --defaults-file=/etc/mysql/debian.cnf < /usr/share/mysql/mroonga/install.sql || true
++mariadb --defaults-file=/etc/mysql/debian.cnf < /usr/share/mariadb/mroonga/install.sql || true
+# Always exit with success instead of leaving dpkg in a broken state
+
+
+#DEBHELPER#
--- /dev/null
- #!/bin/bash
++#!/bin/sh
+
+set -e
+
+# Uninstall Mroonga
+mariadb --defaults-file=/etc/mysql/debian.cnf < /usr/share/mariadb/mroonga/uninstall.sql || true
+# Always exit with success instead of leaving dpkg in a broken state
+
+
+#DEBHELPER#
--- /dev/null
- spelling-error-in-binary dont don't [usr/bin/mariadb-ldb]
- spelling-error-in-binary dont don't [usr/lib/mysql/plugin/ha_rocksdb.so]
- spelling-error-in-binary nam name [usr/bin/mariadb-ldb]
- spelling-error-in-binary nam name [usr/lib/mysql/plugin/ha_rocksdb.so]
-
++# Fixed upstream in https://github.com/facebook/rocksdb/pull/6481 but not yet in MariaDB
+spelling-error-in-binary COMMITED COMMITTED [usr/lib/mysql/plugin/ha_rocksdb.so]
++# False positives from Lintian that finds many short supposedly misspelled words
++# in binaries which don't actually exist in the source code anywhere
++spelling-error-in-binary AfE Safe [usr/bin/mariadb-ldb]
++spelling-error-in-binary AfE Safe [usr/lib/mysql/plugin/ha_rocksdb.so]
++spelling-error-in-binary lengH length [usr/bin/mariadb-ldb]
++spelling-error-in-binary lengH length [usr/lib/mysql/plugin/ha_rocksdb.so]
++spelling-error-in-binary ment meant [usr/bin/mariadb-ldb]
++spelling-error-in-binary ment meant [usr/lib/mysql/plugin/ha_rocksdb.so]
--- /dev/null
- usr/bin/mysql_install_db
- usr/bin/mysql_upgrade
+usr/bin/mysqld_multi
- usr/bin/mysqld_safe
+usr/bin/mysqld_safe_helper
- usr/sbin/mysqld
- usr/share/man/man1/mysql_install_db.1
- usr/share/man/man1/mysql_upgrade.1
+usr/share/man/man1/mysqld_multi.1
- usr/share/man/man1/mysqld_safe.1
+usr/share/man/man1/mysqld_safe_helper.1
- usr/share/man/man8/mysqld.8
--- /dev/null
+usr/bin/innochecksum
+usr/bin/mariadb-install-db
+usr/bin/mariadb-upgrade
++usr/bin/mysql_install_db
++usr/bin/mysql_upgrade
+usr/bin/resolveip
+usr/sbin/mariadbd
++usr/sbin/mysqld
+usr/share/man/man1/innochecksum.1
+usr/share/man/man1/mariadb-install-db.1
+usr/share/man/man1/mariadb-upgrade.1
++usr/share/man/man1/mysql_install_db.1
++usr/share/man/man1/mysql_upgrade.1
+usr/share/man/man1/resolveip.1
+usr/share/man/man8/mariadbd.8
++usr/share/man/man8/mysqld.8
+usr/share/mariadb/bulgarian
+usr/share/mariadb/charsets
+usr/share/mariadb/chinese
+usr/share/mariadb/czech
+usr/share/mariadb/danish
+usr/share/mariadb/dutch
+usr/share/mariadb/english
+usr/share/mariadb/estonian
+usr/share/mariadb/fill_help_tables.sql
+usr/share/mariadb/french
+usr/share/mariadb/georgian
+usr/share/mariadb/german
+usr/share/mariadb/greek
+usr/share/mariadb/hindi
+usr/share/mariadb/hungarian
+usr/share/mariadb/italian
+usr/share/mariadb/japanese
+usr/share/mariadb/korean
+usr/share/mariadb/maria_add_gis_sp_bootstrap.sql
+usr/share/mariadb/mariadb_performance_tables.sql
+usr/share/mariadb/mariadb_sys_schema.sql
+usr/share/mariadb/mariadb_system_tables.sql
+usr/share/mariadb/mariadb_system_tables_data.sql
+usr/share/mariadb/mariadb_test_data_timezone.sql
+usr/share/mariadb/mariadb_test_db.sql
+usr/share/mariadb/norwegian
+usr/share/mariadb/norwegian-ny
+usr/share/mariadb/polish
+usr/share/mariadb/portuguese
+usr/share/mariadb/romanian
+usr/share/mariadb/russian
+usr/share/mariadb/serbian
+usr/share/mariadb/slovak
+usr/share/mariadb/spanish
+usr/share/mariadb/swahili
+usr/share/mariadb/swedish
+usr/share/mariadb/ukrainian
--- /dev/null
- # Bash word source used in comment
- bash-term-in-posix-shell 'source tree,' [usr/bin/mariadb-install-db:93]
-
- # These are from stop word list
++# MyISAM stopwords that cannot be changed and spelling errors remain
+spelling-error-in-binary noone no one [usr/sbin/mariadbd]
+spelling-error-in-binary thats that's [usr/sbin/mariadbd]
+spelling-error-in-binary theres there's [usr/sbin/mariadbd]
+spelling-error-in-binary yuR your [usr/sbin/mariadbd]
-
- # README non common place but good to be there
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mysql-test/README]
++# False positives from Lintian that finds many short supposedly misspelled words
++# in binaries which don't actually exist in the source code anywhere
++spelling-error-in-binary IiF If [usr/sbin/mariadbd]
++spelling-error-in-binary freeE free [usr/sbin/mariadbd]
++# Valid reason for extra documentation in context in directory
++package-contains-documentation-outside-usr-share-doc [usr/share/mariadb/charsets/README]
--- /dev/null
--- /dev/null
++mariadb (1:11.8.2-1) unstable; urgency=medium
++
++ MariaDB 11.8.2 was released on June 4th 2025 by the MariaDB Foundation
++ (https://mariadb.org/mariadb-11-8-2-ga-now-available/). This is the first
++ release in the 11.8 series to be announced GA (general availability). The
++ 11.8 series has long-term support with commitment from the MariaDB Foundation
++ (https://mariadb.org/about/#maintenance-policy) to publish maintenance
++ versions with fixes to software defects and security vulnerabilities until
++ May 2030. Commercial extended support may be available past 2030 as well.
++
++ The previous major long-term supported MariaDB release 11.4 was available only
++ in Debian unstable and in some intermediate Ubuntu releases, so this 11.8 is
++ the first new long-term supported MariaDB release available in long-term
++ supported Debian and Ubuntu releases after MariaDB 10.11.
++
++ To learn what is new in 11.8 it is recommended to read all the previous
++ release notes since 10.11:
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-11-0/
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-11-1/
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-11-2/
++ * https://mariadb.com/kb/en/what-is-mariadb-113/
++ * https://mariadb.com/kb/en/what-is-mariadb-114/
++ - also includes summary of 11.0-11.3
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-11-5/
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-11-6/
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-11-7/
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-11-8/
++ - also includes summary of 11.5-11.7
++
++ Notable new features:
++ - New vector functions and system variables to allow MariaDB to store AI
++ embeddings and search them efficiently: https://mariadb.com/kb/en/vectors/
++ - Change default Unicode collation to uca1400_ai_ci, a modern Unicode
++ collation with proper support for SMP characters (including emoji)
++ - Charset narrowing optimization by default:
++ https://mariadb.com/kb/en/charset-narrowing-optimization/
++ - Unix socket authentication now supports an authentication_string, so the
++ system username and database username can be different
++ - New authentication plugin intended to be the default in a future release:
++ https://mariadb.com/kb/en/authentication-plugin-parsec/
++ - The TIMESTAMP range of values is extended and all of MariaDB validated to
++ support running in 2038
++ - New native functions UUID_v4 and UUID_v7 to make tables that have UUIDs
++ use less space and run operations faster
++ - Multiple extensions to the JSON_* functions
++ - Major improvements to the optimizer:
++ https://mariadb.com/kb/en/the-optimizer-cost-model-from-mariadb-11-0/
++ - The 'mariadb' client has a new argument --show-query-costs to show the
++ query costs after every statement, making optimizing queries easier
++ - InnoDB change buffering removed:
++ https://mariadb.com/kb/en/innodb-change-buffering/
++ - Extended features in SQL_MODE='ORACLE' to help migrations from Oracle
++ - Online schema changes by default
++ - Automatic reclaiming of unused system table space and temporary table space
++ - Most temporary tables now visible in SHOW TABLES and SHOW TABLE STATUS
++ - New SHOW CREATE SERVER statement for easier replication management
++ - All binlog* variables now visible as system variables
++ - New database-level privilege, SHOW CREATE ROUTINE that allows one to see the
++ routine definition even if the user isn't the routine owner
++ - New view sys.privileges_by_table_by_level
++ - TLS encryption use by default expanded. Use --disable-ssl or
++ --disable-ssl-verify-server-cert to revert to the old behavior.
++ - New 'mariadb' client arguments --ssl-fp and -ssl-fplist to ensure the remote
++ server certificate matches a predefined fingerprint
++ - New mariadb-dump and mariadb-import option --parallel for faster batch
++ operations and --dir for easier large database management
++ - The xtrabackup_* files have been renamed to mariadb_backup_*
++ - Multiple occurrences of 'MySQL' has been renamed to 'MariaDB' in
++ documentation, user visible strings and commands
++
++ Things to consider when upgrading from 10.11 to 11.8 are listed on the page
++ https://mariadb.com/kb/en/upgrading-from-mariadb-10-11-to-mariadb-11-4/ and
++ https://mariadb.com/kb/en/upgrading-from-mariadb-11-4-to-mariadb-11-8/.
++
++ Removed in 11.8 (compared to 10.11):
++ - date-format, datetime-format, time-format
++ - debug-no-thread-alarm
++ - innodb-change-buffer-max-size, innodb-change-buffering
++ - innodb-defragment, innodb-defragment-fill-factor,
++ innodb-defragment-fill-factor-n-recs, innodb-defragment-frequency,
++ innodb-defragment-n-pages, innodb-defragment-stats-accuracy
++ - max-tmp-tables (use 'max-temp-*' instead)
++ - old-alter-table (use 'alter-algorithm' instead)
++ - wsrep-causal-reads, wsrep-load-data-splitting
++
++ Deprecated server variables (marked as deprecated in 11.8):
++ - alter-algorithm
++ - big-tables
++ - binlog-optimize-thread-scheduling
++ - innodb-file-per-table
++ - innodb-flush-method
++ - innodb-prefix-index-cluster-optimization
++ - keep-files-on-create
++ - language (use 'lc-messages-dir' instead)
++ - log-slow-admin-statements (use 'log-slow-filter' instead)
++ - long-query-time (use 'log-slow-query-time' instead)
++ - old (use 'old-mode' instead)
++ - optimizer-adjust-secondary-key-costs
++ - secure-auth
++
++ Changed behavior in server variables in 11.8 (compared to 10.11):
++ - binlog-row-image has new available option: FULL_NODUP
++ - collation-server defaults now to 'utf8mb4_uca1400_ai_ci'
++ - histogram-type defaults now to 'JSON_HB'
++ - innodb-doublewrite now accepts 'ON', 'OFF', 'fast' (default remains 'ON')
++ - innodb-prefix-index-cluster-optimization defaults now to FALSE (also
++ deprecated)
++ - innodb-snapshot-isolation defaults now to TRUE
++ - innodb-undo-tablespaces defaults now to 3
++ - old-mode has new available options: LOCK_ALTER_TABLE_COPY, OLD_FLUSH_STATUS,
++ SESSION_USER_IS_USER
++ - optimizer-switch has new available option: sargable_casefold
++ - optimizer-switch defaults now include: not_null_range_scan=off,
++ hash_join_cardinality=on, cset_narrowing=on, sargable_casefold=on
++ (and no longer any engine_condition_pushdown)
++ - ssl defaults to 'on'; use --skip-ssl to disable
++
++ New server variables in 11.8 (compared to 10.11):
++ - New variables to control binary logs and GTID: binlog-gtid-index,
++ binlog-gtid-index-page-size, binlog-gtid-index-span-min (control GTID
++ indexing for faster lookups); binlog-large-commit-threshold (improve
++ concurrency for large transactions); binlog-legacy-event-pos (add
++ end_log_pos to all events for compatibility); binlog-space-limit,
++ max-binlog-total-size (limit total disk space used by binary logs)
++ - block-encryption-mode: Default mode for AES_ENCRYPT/AES_DECRYPT functions
++ - character-set-collations: Override default collations for character sets
++ - innodb-data-file-buffering, innodb-data-file-write-through,
++ innodb-log-file-write-through: Control file system caching and write-through
++ behavior for InnoDB data and log files
++ - innodb-truncate-temporary-tablespace-now: Trigger immediate shrinking of the
++ temporary tablespace
++ - log-slow-always-query-time: Set a time threshold above which slow queries
++ are *always* logged, regardless of rate limits
++ - max-tmp-session-space-usage, max-tmp-total-space-usage: Limit temporary
++ file/table usage per session and globally
++ - mhnsw-default-distance, mhnsw-default-m, mhnsw-ef-search,
++ mhnsw-max-cache-size: Control parameters for the MHNSW vector index used
++ for AI embeddings
++ - optimizer-disk-read-cost, optimizer-disk-read-ratio,
++ optimizer-index-block-copy-cost, optimizer-key-compare-cost,
++ optimizer-key-copy-cost, optimizer-key-lookup-cost,
++ optimizer-key-next-find-cost, optimizer-row-copy-cost,
++ optimizer-row-lookup-cost, optimizer-row-next-find-cost,
++ optimizer-rowid-compare-cost, optimizer-rowid-copy-cost,
++ optimizer-scan-setup-cost, optimizer-where-cost: Fine-tune the optimizer's
++ cost model calculations for various operations
++ - redirect-url: URL for redirecting clients to another server
++ - slave-abort-blocking-timeout: Timeout for slave DDL waiting on blocking
++ queries
++ - slave-connections-needed-for-purge: Minimum slaves needed for automatic
++ binlog purge based on size/time limits
++
++ -- Otto Kekäläinen <otto@debian.org> Sun, 08 Jun 2025 11:19:07 +0300
++
++mariadb (1:10.11.2-1) unstable; urgency=medium
++
++ MariaDB 10.11.2 was released on February 16th 2023 by the MariaDB Foundation
++ (https://mariadb.org/mariadb-10-11-2-ga-now-available/). This is the first
++ release in the 10.11 series to be announced GA (general availability). The
++ 10.11 series has long-term support with commitment from the MariaDB Foundation
++ (https://mariadb.org/about/#maintenance-policy) to publish maintenance
++ versions with fixes to software defects and security vulnerabilities until
++ February 2028.
++
++ The previous major releases (10.7, 10.8, 10.9, 10.10) were not long-terms
++ supported versions and thus not imported to Debian. To learn what is new in
++ 10.11 it is recommended to read all the release notes:
++
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-1011/
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-1010/
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-109/
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-108/
++ * https://mariadb.com/kb/en/changes-improvements-in-mariadb-107/
++
++ Notable new features:
++ - New datatypes UUID and INET4
++ - New functions SFORMAT (text formatting), NATURAL_SORT_KEY, RANDOM_BYTES and
++ several related to JSON
++ - New keyword AUTO in system versioned tables for partitioning
++ (https://mariadb.com/kb/en/system-versioned-tables/#automatically-creating-partitions)
++ - Unicode Collation Algorithm (UCA) upgrade to 14.0.0
++ - New privileges 'READ ONLY ADMIN' and 'GRANT TO PUBLIC'
++ (https://mariadb.org/grant-to-public-in-mariadb/)
++ - password_reuse_check plugin (part of mariadb-server package)
++ - Hashicorp Key Management Plugin for implementing encryption using keys
++ stored in the Hashicorp Vault KMS (mariadb-plugin-hashicorp-key-management
++ package)
++
++ Important packaging change: Compression libraries have been split into
++ separate packages named mariadb-provider-plugin-(bzip2/lz4/lzma/lzo/snappy).
++ If a non-zlib compression algorithm was used in InnoDB or Mroonga before
++ upgrading to 10.11, those tables will be unreadable until the appropriate
++ compression library is installed.
++
++ Things to consider when upgrading from 10.6 to 10.11 are listed on the page
++ https://mariadb.com/kb/en/upgrading-from-mariadb-10-6-to-mariadb-10-11/.
++
++ New server variables in 10.11 (compared to 10.6):
++ - binlog-alter-two-phase: When set, split ALTER at binary logging into 2
++ statements: START ALTER and COMMIT/ROLLBACK ALTER. Defaults to 'FALSE'.
++ - innodb-log-file-buffering: Whether the file system cache for ib_logfile0 is
++ enabled
++ - optimizer-extra-pruning-depth: If the optimizer needs to enumerate join
++ prefix of this size or larger, then it will try aggressively prune away the
++ search space.
++ - log-slow-min-examined-row-limit: Don't write queries to slow log that
++ examine fewer rows than that
++ - log-slow-query: Log slow queries to a table or log file. Defaults logging to
++ a file 'hostname'-slow.log or a table mysql.slow_log if --log-output=TABLE
++ is used. Must be enabled to activate other slow log options.
++ - log-slow-query-file: Log slow queries to given log file. Defaults logging to
++ 'hostname'-slow.log. Must be enabled to activate other slow log options
++ - log-slow-query-time: Log all queries that have taken more than
++ log_slow_query_time seconds to execute to the slow query log file. The
++ argument will be treated as a decimal value with microsecond precision
++ - slave-max-statement-time: A query that has taken more than
++ slave_max_statement_time seconds to run on the slave will be aborted. The
++ argument will be treated as a decimal value with microsecond precision. A
++ value of 0 (default) means no timeout
++ - system-versioning-insert-history: Allows direct inserts into ROW_START and
++ ROW_END columns if secure_timestamp allows changing @@timestamp
++ - wsrep-allowlist: Allowed IP addresses split by comma delimiter
++ - wsrep-status-file: wsrep status output filename
++
++ Changed behavior in server variables in 10.11 (compared to 10.6):
++ - explicit-defaults-for-timestamp: enabled by default
++ - optimizer-prune-level: defaults to 2 (instead of 1)
++ - old-mode: new options IGNORE_INDEX_ONLY_FOR_JOIN and COMPAT_5_1_CHECKSUM
++ - wsrep-mode: new option BF_ABORT_MARIABACKUP
++ - read-only: changing value requires 'READ ONLY ADMIN' privilege
++
++ One of the most important performance related server variables
++ 'innodb_log_file_size' is now dynamic so it can be changed without having to
++ restart the server.
++
++ Removed in 10.11 (compared to 10.6):
++ - innodb-log-write-ahead-size: the physical block size of the underlying
++ storage is instead detected and used
++ - wsrep-replicate-myisam: use wsrep_mode instead
++ - wsrep-strict-ddl: use wsrep_mode instead
++
++ Deprecated server variables:
++ - innodb_change_buffering
++ - innodb-buffer-pool-chunk-size: defaults to 0 (instead of 134217728) in
++ server variables because the server automatically sizes it
++ - keep_files_on_create: orphan files are now deleted automatically, so this
++ setting should never be needed
++
++ Note also that the MariaDB client settings have changed to now use SSL/TLS
++ by default.
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 16 Feb 2023 23:53:02 -0800
++
++mariadb (1:10.11.1-1) unstable; urgency=medium
++
++ Version suffixed packages (e.g. mariadb-server-10.6) have now been deprecated
++ as it made maintenance complicated and there was no known use cases or users
++ of the naming scheme, as multiple different major version MariaDB server
++ packages could not be co-installed anyway and source or the 'mariadb-server'
++ and 'mariadb-client' packages is easiest controlled by repositories and
++ package versioning, not versions in package *names*.
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 02 Jan 2023 23:42:58 -0800
++
++mariadb-10.6 (1:10.6.4-1) unstable; urgency=medium
++
++ Import new upstream release MariaDB 10.6.4
++ - 10.6 introduces one new status variable:
++ * Innodb_buffer_pool_pages_lru_freed
++ (https://mariadb.com/kb/en/status-variables-added-in-mariadb-106/)
++ * Resultset_metadata_skipped
++ (undocumented upstream https://mariadb.com/docs/reference/mdb/status-variables/Resultset_metadata_skipped/)
++
++ Read more at https://mariadb.com/kb/en/status-variables-added-in-mariadb-106/
++
++ - 10.6 introduces several new server variables:
++ * binlog_expire_logs_seconds
++ * innodb_deadlock_report
++ * innodb_read_only_compressed
++
++ Read more at https://mariadb.com/kb/en/system-variables-added-in-mariadb-106/
++
++ - 10.6 removes several server variables:
++ * innodb_adaptive_max_sleep_delay
++ * innodb_background_scrub_data_*
++ * innodb_buffer_pool_instances
++ * innodb_commit_concurrency
++ * innodb_concurrency_tickets
++ * innodb_file_format
++ * innodb_large_prefix
++ * innodb_lock_schedule_algorithm
++ * innodb_log_checksums
++ * innodb_log_compressed_pages
++ * innodb_log_files_in_group
++ * innodb_log_optimize_ddl
++ * innodb_page_cleaners
++ * innodb_replication_delay (*not* related to https://mariadb.com/kb/en/delayed-replication/)
++ * innodb_scrub_*
++ * innodb_sync_array_size
++ * innodb_thread_*
++ * innodb_undo_logs
++
++ Read more at https://mariadb.com/kb/en/upgrading-from-mariadb-105-to-mariadb-106/#options-that-have-been-removed-or-renamed
++
++ - 10.6 introduces new default server variable values:
++ * character sets utf8 -> utf8mb3
++ * innodb_flush_method fsync -> O_DIRECT
++ * innodb_use_native_aio ON -> OFF
++ * old_mode (none) -> UTF8_IS_UTF8MB3
++
++ - 10.6 introduces new 'sys' database and several 'sys' procedures
++
++ Read more at https://mariadb.com/kb/en/sys-schema/
++
++ - Read more about above changes at
++ https://mariadb.com/kb/en/upgrading-from-mariadb-105-to-mariadb-106/
++ https://mariadb.com/kb/en/changes-improvements-in-mariadb-106/
++
++ - Update libmariadb folder to match the one in MariaDB 10.6.4
++ (MariaDB Connector C 10.6.4)
++
++ -- Otto Kekäläinen <otto@debian.org> Mon, 06 Sep 2021 22:55:39 -0700
++
++mariadb-10.5 (1:10.5.5-1) unstable; urgency=medium
++
++ The latest version 10.5 of the MariaDB Server came out in June 2020 and is
++ guaranteed to have security releases at least until summer 2025.
++
++ For more information on what is new in MariaDB 10.5 check out:
++ https://speakerdeck.com/ottok/debconf-2020-whats-new-in-mariadb-server-10-dot-5-and-galera-4
++ or video from https://peertube.debian.social/videos/watch/bb80cf53-d9ba-4ed9-b472-a21238fb67f5.
++
++ Quick summary:
++ - Service name is now 'mariadb', e.g. /etc/init.d/mariadb and systemctl mariadb
++ - The main server binary is now running as 'mariadbd' instead of old 'mysqld'
++ - Many commands are now mariadb-* instead of old mysql*, but old names
++ continue to work as symlinks
++ - Referencing the /etc/mysql/debian.cnf file is not advised anymore. It will
++ be deprecated in a future Debian release and has been obsolete anyway for
++ several years now since MariaDB in Debian introduced Unix socket
++ authentication for the root account in 2015.
++
++ MariaDB 10.5 has been tested to be backwards compatible with all previous
++ versions of MariaDB and all previous versions of MySQL up until version 5.7.
++ Note that MySQL 8.0 introduces significant backwards incompatible changes
++ compared to MySQL 5.7, and thus in-place binary upgrades from MySQL 8.0 to
++ MariaDB 10.5 are not possible, but sysadmins need to upgrade by exporting and
++ importing SQL dumps of their databases.
++
++ If you encounter any bugs, please make sure your bug report is of highest
++ standards so we can quickly reproduce and fix the issue. Even better if you
++ find the solution yourself, and can submit it as a Merge Request at
++ https://salsa.debian.org/mariadb-team/mariadb-10.5/
++
++ If you appreciate the Debian packaging work done, please star us on Salsa!
++
++ -- Otto Kekäläinen <otto@debian.org> Thu, 17 Sep 2020 14:37:47 +0300
++
++mariadb-10.1 (10.1.20-1) unstable; urgency=low
++
++ MariaDB is now the default MySQL variant in Debian, at version 10.1. The
++ Stretch release introduces a new mechanism for switching the default
++ variant, using metapackages created from the 'mysql-defaults' source
++ package. For example, installing the metapackage 'default-mysql-server' will
++ install 'mariadb-server-10.1'. Users who had 'mysql-server-5.5' or
++ 'mysql-server-5.6' will have it removed and replaced by the MariaDB
++ equivalent. Similarly, installing 'default-mysql-client' will install
++ 'mariadb-client-10.1'.
++
++ Note that the database binary data file formats are not backwards
++ compatible, so once you have upgraded to MariaDB 10.1 you will not be able
++ to switch back to any previous version of MariaDB or MySQL unless you have a
++ proper database dump. Therefore, before upgrading, please make backups of
++ all important databases with an appropriate tool such as 'mysqldump'.
++
++ The 'virtual-mysql-*' and 'default-mysql-*' packages will continue to exist.
++ MySQL continues to be maintained in Debian, in the unstable release. See the
++ page https://wiki.debian.org/Teams/MySQL more information about the
++ mysql-related software available in Debian.
++
++ -- Otto Kekäläinen <otto@debian.org> Tue, 14 Mar 2017 16:21:58 +0200
--- /dev/null
- ==============================
++* WHAT TO DO AFTER UPGRADES
++===========================
++
++Please see the MariaDB package changelog to learn what is new in the latest
++Debian revision. It can be read by e.g.
++
++ zcat /usr/share/doc/mariadb-server/changelog.Debian.gz | more
++
++
+* MARIADB WON'T START OR STOP?
- First check the contents of syslog (or systemd journal) and then check the
- logs at /var/log/mysql/ for any hints of what might be wrong.
++============================
+
+The most common reasons the server does not start are:
+- AppArmor is enforced and something is wrong with the confinement profile.
+- Process supervisor scripts (init, systemd etc) fail to execute normally.
+- The configuration in /etc/mysql/... is wrong and prevents server from running.
+
- Examples:
- grep mariadbd /var/log/syslog
- journalctl -u mariadb
++Typically this is debugged by attempting to restart the server several times,
++and looking in the system logs what the server is reporting.
++
++Example commands when running systemd:
+
- * NEW SERVICE NAME, PROCESS AND BINARY NAMES SINCE MARIADB 10.5
- ===============================================================
++ systemctl restart mariadb
++ systemctl status mariadb
++ journalctl -u mariadb
+
++Example commands when running rsyslogd or syslog-ng:
+
- Starting form MariaDB 10.5, the default SysV init service name is 'mariadb',
++ /etc/init.d/mariadb restart
++ /etc/init.d/mariadb status
++ grep mysql /var/log/syslog
+
- Note that the new daemon name is 'mariadbd' instead of 'mysqld' and also most
- of the binaries have been renamed to mariadb-something, yet the old mysql-something
- name has been kept as a symbolic link to the new name for backwards compatibility.
++If the system does not seem to have any logs visible by default, such when
++running inside a container, these commands can be used to install and activate
++rsyslog:
++
++ apt install --yes rsyslog
++ /usr/sbin/rsyslogd -n -iNONE &
++
++
++* NEW SERVICE NAME, PROCESS AND BINARY NAMES IN MARIADB 10.5
++============================================================
++
++Starting from MariaDB 10.5, the default SysV init service name is 'mariadb',
+and can be accessed at path /etc/init.d/mariadb. The alias 'mysql' is only
+created on upgrades.
+
+On systemd services both 'mariadb' and alias 'mysql' are available all the time.
+
- ===================================================================
++Note that the new daemon name is 'mariadbd' instead of 'mysqld' and also most of
++the binaries have been renamed to mariadb-something, yet the old mysql-something
++name has been kept as a symbolic link to the new name for backwards
++compatibility.
+
+
+* NATIVE SYSTEMD SERVICE INTRODUCED IN MARIADB 10.1
+===================================================
+
+From MariaDB 10.1 onward the upstream mariadb.service and mariadb@.service are
+used to provide the full systemd experience. Some features available in
+traditional /etc/init.d/mysql have been changed. For details see
+https://mariadb.com/kb/en/mariadb/systemd/
+
+
+* MIXING PACKAGES FROM MARIADB.ORG AND OFFICIAL DEBIAN REPOSITORIES
- Please note that the MariaDB packaging in official Debian repositories are of
- a completely new generation compared to the legacy packaging used in MariaDB.org
- repositories. You cannot mix and match MariaDB 10.1 packages from official
- Debian (or Ubuntu) repositories with packages from MariaDB.org repositories.
- Packages from the MariaDB.org repositories include the revision string '+maria'.
++==================================================================
+
- using the Unix socket, e.g. any mariadb invocation by root or via sudo will
- let the user see the MariaDB prompt.
++Please note that the MariaDB packaging in official Debian repositories is not
++identical to that in the MariaDB.org repositories, and the packages might not be
++fully interoperable. To avoid issues, don't mix and match MariaDB packages from
++official Debian (or Ubuntu) repositories with packages from MariaDB.org
++repositories. Packages from the MariaDB.org repositories include the revision
++string '+maria'.
+
+If a MariaDB.org repository is enabled, learn to use apt pinning properly.
+
+Please do not file bugs in Debian regarding packages with '+maria' in the
+revision string.
+
+
++* DOWNGRADING MAJOR VERSIONS (E.G. 11.8 -> 11.4)
++================================================
++
++Due to the nature of databases with persistent data, major version upgrades that
++alter the on-disk format will render downgrading impossible. Downgrading a major
++version in-place, such as swapping the binaries of 11.8 to 11.4 with the same
++data directory, is not possible.
++
++The only way to execute a major version downgrade is to, take a
++mariadb-dump/mariadb-backup consistent backup using the current version and
++reload after downgrading and purging existing databases.
++
++This may however not always work. It is always recommended to take a backup
++**before** attempting an upgrade, so that in case of an emergency one can
++restore to the backup.
++
++
++* DOWNGRADING MINOR VERSIONS (E.G. 11.8.2 -> 11.8.1)
++====================================================
++
++Minor versions of MariaDB do not alter the on-disk data format, and thus allow
++downgrades. However, once a new MariaDB version is available in the
++Debian/Ubuntu repositories, it is not straightforward to `apt install` the old
++version. Previous Debian packages are however available from
++https://snapshot.debian.org/ but require learning how apt pinning works to use
++correctly.
++
++
++* DEFAULT MARIADB SERVER SETTINGS ARE SECURE
++============================================
++
++For reference, these are the default users, grants and databases in a fresh
++MariaDB installation:
++
++ SELECT User,Host FROM mysql.user;
++ +-------------+-----------+
++ | User | Host |
++ +-------------+-----------+
++ | mariadb.sys | localhost |
++ | mysql | localhost |
++ | root | localhost |
++ +-------------+-----------+
++
++ SHOW GRANTS FOR 'mariadb.sys'@'localhost';
++ +----------------------------------------------------------------------------+
++ | Grants for mariadb.sys@localhost |
++ +----------------------------------------------------------------------------+
++ | GRANT USAGE ON *.* TO `mariadb.sys`@`localhost` |
++ | GRANT SELECT, DELETE ON `mysql`.`global_priv` TO `mariadb.sys`@`localhost` |
++ +----------------------------------------------------------------------------+
++
++ SHOW GRANTS FOR 'mysql'@'localhost';
++ +------------------------------------------------------------------------------------------------------------------------------------------+
++ | Grants for mysql@localhost |
++ +------------------------------------------------------------------------------------------------------------------------------------------+
++ | GRANT ALL PRIVILEGES ON *.* TO `mysql`@`localhost` IDENTIFIED VIA mysql_native_password USING 'invalid' OR unix_socket WITH GRANT OPTION |
++ | GRANT PROXY ON ''@'%' TO 'mysql'@'localhost' WITH GRANT OPTION |
++ +------------------------------------------------------------------------------------------------------------------------------------------+
++
++ SHOW GRANTS FOR 'root'@'localhost';
++ +-----------------------------------------------------------------------------------------------------------------------------------------+
++ | Grants for root@localhost |
++ +-----------------------------------------------------------------------------------------------------------------------------------------+
++ | GRANT ALL PRIVILEGES ON *.* TO `root`@`localhost` IDENTIFIED VIA mysql_native_password USING 'invalid' OR unix_socket WITH GRANT OPTION |
++ | GRANT PROXY ON ''@'%' TO 'root'@'localhost' WITH GRANT OPTION |
++ +-----------------------------------------------------------------------------------------------------------------------------------------+
++
++ SHOW DATABASES;
++ +--------------------+
++ | Database |
++ +--------------------+
++ | information_schema |
++ | mysql |
++ | performance_schema |
++ | sys |
++ +--------------------+
++
++These are secure. All users are bound to localhost only. The `root` user is used
++by the Linux root user (or somebody running `sudo`) accessing MariaDB. The user
++`mysql` is used by some system automation scripts that don't need full database
++root access. The user `mariadb.sys` cannot be used to login at all, and exists
++only as an internal construct for system table access.
++
++There is absolutely no need to run the script `mariadb-secure-installation` or
++(`mysql_secure_installation`) after installing MariaDB with `apt install
++mariadb-server`. The script is useless, and very misleading with reporting
++"Success!" after every step even if it did nothing.
++
++The script claims to activate unix socket authentication for root, but
++Debian/Ubuntu has already been using it by default for over a decade. The script
++also claims to remove remote access for the root user, but the default root user
++is already bound to localhost only by default. Additionally the script claims to
++drop anonymous users and remove test databases, but there are none. The script
++itself hasn't really been maintained for over a decade, and it is best to not
++trust it in any way.
++
++
+* ROOT USER AUTHENTICATION VIA UNIX SOCKET
+==========================================
+
+On new installs no root password is set and no debian-sys-maint user is
+created anymore. Instead the MariaDB root account is set to be authenticated
- You may never ever delete the MariaDB user "root". Although it has no password
- is set, the unix_auth plugin ensure that it can only be run locally as the root
- user.
++using the Unix socket, e.g. any mysqld invocation by root or via sudo will
++let the user see the mariadbd prompt.
+
- * MARIADB IS SECURE BY DEFAULT
- ==============================
++You may never ever delete the MariaDB user "root". Although it has no password,
++the unix_auth plugin ensures that it can be accessed by a locally connecting
++superuser (Linux root or sudo user).
+
+The credentials in /etc/mysql/debian.cnf specify the user which is used by the
+init scripts to stop the server and perform log rotation. This used to be the
+debian-sys-maint user which is no longer used as root can run directly.
+
+If you have start/stop problems make sure that the /etc/mysql/debian.cnf file
+specifies the root user and no password. In the long run please stop using that
+file as is has been obsoleted.
+
++If you need to do a restore of a previous `mysql_dump`/`mariadb-dump` that
++includes the `mysql.user` table from before the passwordless transition, that
++will revert you to a non-passwordless root setup (and its various drawbacks
++illustrated above and below). If you'd like to restore the now-standard
++passwordless-root setup, you can do so with:
+
- MariaDB in Debian is secure by default, because:
++ GRANT ALL PRIVILEGES ON *.* TO 'root'@'localhost' IDENTIFIED VIA unix_socket WITH GRANT OPTION
+
- - It only listens to the localhost socket and cannot be accessed remotely unless
- the sysadmin changes the configuration in /etc/mysql to allow so.
- - There is no debian-sys-maint with password in /etc/mysql/debian.cnf anymore.
- - There is no root account with password anymore. The system admin needs to
- create one themselves if they need it. With no password, all issues related
- to password management and password leaking are gone. Sysadmins can access
- the database without a password simply by running 'sudo mariadb' thanks to
- socket based authentication, which detects the system root user and allows
- them to use the mariadb console as the MariaDB root user. For details see
- https://www.slideshare.net/ottokekalainen/less-passwords-more-security-unix-socket-authentication-and-other-mariadb-hardening-tips
- - There is no test database nor test accounts in the out-of-the-box Debian
- installation.
++And then drop the debian-sys-maint user with:
+
- Therefore there is also no need to run the 'mariadb-secure-installation'. In fact
- that script will try to do things that are already prevented, and might fail.
++ DROP USER 'debian-sys-maint'@'localhost'
+
- * WHAT TO DO AFTER UPGRADES
- ===========================
++And then:
+
++ FLUSH PRIVILEGES
+
- The privilege tables are automatically updated so all there is left is read
- the release notes on https://mariadb.com/kb/en/release-notes/ to see if any
- changes affect custom apps.
++NOTE: Before modifying root permissions to the MariaDB instance, you should
++ensure you keep a mysql root connection open until you're sure the changes
++work and you can still create new root connections to your server.
+
- There should not be any need to run 'mariadb-upgrade' manually, as the upgrade
- scripts do that automatically.
+
- * WHAT TO DO AFTER INSTALLATION
- ===============================
++* ROOT USER WITH REMOTE ACCESS
++==============================
+
++This is not recommended in general, but if you specifically want the user 'root'
++to be able to access MariaDB remotely, run this to add a second 'root' entry in
++the users table that can access from any remote host and authenticate using
++password:
+
- The MariaDB manual describes certain steps to do at this stage in a separate
- chapter. They are not necessary as the Debian packages does them
- automatically.
++ -- Configure root@% for remote connections using password
++ CREATE OR REPLACE USER 'root'@'%' IDENTIFIED BY 'your_secure_password';
+
- There should not be any need to run 'mariadb-install-db' manually, as the install
- scripts do that automatically.
++ -- Grant full privileges with permission to grant more
++ GRANT ALL PRIVILEGES ON *.* TO 'root'@'%' WITH GRANT OPTION;
++ GRANT PROXY ON ''@'%' TO 'root'@'%' WITH GRANT OPTION;
+
- The only thing that is left over for the admin is
- - creating new users and databases
- - read the rest of this text
++ -- Reload privilege tables
++ FLUSH PRIVILEGES;
+
- * NETWORKING
- ============
+
++* CREATING DATABASES AND USERS FOR APPS
++=======================================
+
- For security reasons, the Debian package has enabled networking only on the
- loop-back device using "bind-address" in /etc/mysql/mariadb.cnf. Check with
- "netstat -tlnp" where it is listening. If your connection is aborted
- immediately check your firewall rules or network routes.
-
- * WHERE IS THE DOCUMENTATION?
- =============================
++On Debian/MariaDB running `apt install mariadb-server` will set up a sane and
++secure MariaDB server by default. The commands `mariadb-install-db` and
++`mariadb-upgrade` run automatically when needed.
+
- https://mariadb.com/kb
++The primary tasks for the administrator is to create new users and databases,
++and add custom settings in `/etc/mysql/mariadb.conf.d/`.
+
- * PASSWORDS
- ===========
++To add a custom database for an app, and create a custom password-authenticated
++user that has full access to that database over the network, run the following
++commands using the `mariadb` client (e.g., via `sudo mariadb`):
+
++ -- Create the database
++ CREATE DATABASE app_db;
+
- It is recommended you create additional admin users for your database
- administration needs in addition to the default root user.
++ -- Create the user 'app_user' with a secure password, allowing connections from any IP address
++ CREATE USER 'app_user'@'%' IDENTIFIED BY 'your_secure_password';
+
- If your local Unix account is the one you want to have local super user
- access on your database with you can create the following account that will
- only work for the local Unix user connecting to the database locally.
++ -- Grant full privileges to the 'app_user' user on the 'app_db' database
++ GRANT ALL PRIVILEGES ON app_db.* TO 'app_user'@'%';
+
- sudo /usr/bin/mariadb -e "GRANT ALL ON *.* TO '$USER'@'localhost' IDENTIFIED VIA unix_socket WITH GRANT OPTION"
++ -- Reload the privilege tables to apply changes
++ FLUSH PRIVILEGES;
+
- To create a local machine account username=USERNAME with a password:
++Remember to replace 'your_secure_password' with a strong, unique password.
++Using '%' for the host allows connections from any IP address, which is less
++secure than restricting connections to a specific IP address or subnet if
++possible.
+
- sudo /usr/bin/mariadb -e "GRANT ALL ON *.* TO 'USERNAME'@'localhost' IDENTIFIED BY 'password' WITH GRANT OPTION"
+
- To create a USERNAME user with password 'password' admin user that can access
- the DB server over the network:
++* REMOTE CONNECTIONS OVER THE NETWORK AND TLS
++=============================================
+
- sudo /usr/bin/mariadb -e "GRANT ALL ON *.* TO 'USERNAME'@'%' IDENTIFIED BY 'password' WITH GRANT OPTION"
++For security reasons, the Debian package has enabled networking only on the
++loop-back device using `bind-address` in
++`/etc/mysql/mariadb.conf.d/50-server.cnf`. Check current setting by running:
+
- Scripts should run as a user who have the required grants and be identified via unix_socket.
++ SHOW VARIABLES LIKE 'bind_address';
+
- It is wise to run scripts as the "mysql" system user. Like root,
- mysql@localhost is created by default to have all privileges in MariaDB
- and to use unix_socket authentication. But scripts running under "mysql"
- won't have system-wide root so they won't be able to corrupt your system.
++Alternatively, check with `sudo netstat -tlnp` on what ports services are
++listening. If your connection is aborted immediately, check your firewall rules
++or network routes.
+
- If you are too tired to type the password in every time and unix_socket auth
- doesn't suit your needs, you can store it in the file $HOME/.my.cnf. It should
- be chmod 0600 (-rw------- username usergroup .my.cnf) to ensure that nobody else
- can read it. Every other configuration parameter can be stored there, too.
++To allow remote connections from the network, the easiest way is to create a new
++configuration file and allow the MariaDB Server to listen for remote
++connections. To ensure passwords don't leak on the network, enforce that
++connections must use TLS encryption.
+
- For more information in the MariaDB manual in/usr/share/doc/mariadb-doc or
- https://mariadb.com/kb/en/configuring-mariadb-with-mycnf/.
++Create file `/etc/mysql/mariadb.conf.d/99-server-customizations.cnf`
++with contents:
+
- * FURTHER NOTES ON REPLICATION
- ==============================
++ [mariadbd]
++ # Listen for connections from anywhere
++ bind-address = 0.0.0.0
++ # Only allow TLS encrypted connections
++ require-secure-transport = on
+
++For settings to take effect, restart the server:
+
- If the MariaDB server is acting as a replica, you should not set --tmpdir to
- point to a directory on a memory-based file system or to a directory that is
- cleared when the server host restarts. A replica needs some of its temporary
- files to survive a machine restart so that it can replicate temporary tables
- or LOAD DATA INFILE operations. If files in the temporary file directory are
- lost when the server restarts, replication fails.
++ systemctl restart mariadb
+
- * DOWNGRADING
- =============
++Note that in MariaDB 11.8 the TLS certificates are generated automatically, so
++there is no need to create them manually.
+
++Test connections with e.g.
+
- Unsupported. Period.
++ mariadb --user=app_user --password=your_secure_password --host=192.168.1.66 -e '\s'
++ mariadb --user=root --password=your_secure_password --host=192.168.1.66 --ssl
+
- You might get lucky downgrading a few minor versions without issued. Take a
- backup first. If you break it you get to keep both pieces. Do a restore from
- backup or upgrade to the previous version.
+
- If doing a major version downgrade, take a mariadb-dump/maria-backup consistent
- backup using the current version and reload after downgrading and purging
- existing databases.
++* WARNING OF REPLICATION WITH TMPDIR
++====================================
+
++If the MariaDB server is acting as a replication slave, you should not
++set --tmpdir to point to a directory on a memory-based file system or to
++a directory that is cleared when the server host restarts. A replication
++slave needs some of its temporary files to survive a machine restart so
++that it can replicate temporary tables or LOAD DATA INFILE operations. If
++files in the temporary file directory are lost when the server restarts,
++replication fails.
+
+
+* BACKUPS
+=========
+
+Backups save jobs. Don't get caught without one.
++
++
++* WHERE IS THE DOCUMENTATION?
++=============================
++
++Read more at https://mariadb.com/kb
--- /dev/null
+#!/bin/bash
+
+set -e
+
+# shellcheck source=/dev/null
+. /usr/share/debconf/confmodule
+
+if [ -n "$DEBIAN_SCRIPT_DEBUG" ]
+then
+ set -v -x; DEBIAN_SCRIPT_TRACE=1
+fi
+
+${DEBIAN_SCRIPT_TRACE:+ echo "#42#DEBUG# RUNNING $0 $*" 1>&2}
+
+# Beware that there are two ypwhich one of them needs the 2>/dev/null!
+if test -n "$(command -v ypwhich 2>/dev/null)" && ypwhich > /dev/null 2>&1
+then
++ # systemd-sysusers operates on /etc/passwd and /etc/group directly and does
++ # not support NIS/LDAP. Users on NIS/YP setups must ensure the mysql user and
++ # group exist and are visible via NSS.
+ db_input high mariadb-server/nis_warning || true
+ db_go
+fi
--- /dev/null
--- /dev/null
++$database mysql
--- /dev/null
- etc/apparmor.d/usr.sbin.mariadbd
++#!/usr/bin/dh-exec
+debian/additions/debian-start etc/mysql
+debian/additions/debian-start.inc.sh usr/share/mariadb
+debian/additions/echo_stderr usr/share/mariadb
++debian/additions/mariadb.conf.d/50-mysqld_safe.cnf etc/mysql/mariadb.conf.d
+debian/additions/mariadb.conf.d/50-server.cnf etc/mysql/mariadb.conf.d
+debian/additions/source_mariadb.py usr/share/apport/package-hooks
- lib/*/security/pam_user_map.so
- lib/systemd/system/mariadb@bootstrap.service.d/use_galera_new_cluster.conf
- lib/systemd/system/mariadb-extra@.socket
- lib/systemd/system/mariadb.service
- lib/systemd/system/mariadb@.service
- lib/systemd/system/mariadb@.socket
- lib/systemd/system/mysql.service
- lib/systemd/system/mysqld.service
- support-files/rpm/enable_encryption.preset etc/mysql/mariadb.conf.d/99-enable-encryption.cnf.preset
++debian/apparmor/mariadbd etc/apparmor.d
+etc/logrotate.d/mariadb
+etc/security/user_map.conf
- usr/bin/galera_new_cluster
- usr/bin/galera_recovery
- usr/bin/mariadb-service-convert
++usr/lib/*/security/pam_user_map.so
++[linux-any] usr/lib/systemd/system/mariadb-extra.socket
++[linux-any] usr/lib/systemd/system/mariadb-extra@.socket
++[linux-any] usr/lib/systemd/system/mariadb.service
++[linux-any] usr/lib/systemd/system/mariadb@.service
++[linux-any] usr/lib/systemd/system/mariadb.socket
++[linux-any] usr/lib/systemd/system/mariadb@.socket
++[linux-any] usr/lib/systemd/system/mariadb@bootstrap.service.d/use_galera_new_cluster.conf
++[linux-any] usr/lib/systemd/system/mysql.service
++[linux-any] usr/lib/systemd/system/mysqld.service
+usr/lib/tmpfiles.d/mariadb.conf
++[linux-any] usr/lib/sysusers.d/mariadb.conf
+usr/bin/aria_chk
+usr/bin/aria_dump_log
+usr/bin/aria_ftdump
+usr/bin/aria_pack
+usr/bin/aria_read_log
- usr/lib/mysql/plugin/auth_pam.so
++[linux-any] usr/bin/galera_new_cluster
++[linux-any] usr/bin/galera_recovery
++[linux-any] usr/bin/mariadb-service-convert
+usr/bin/mariadbd-multi
+usr/bin/mariadbd-safe
+usr/bin/mariadbd-safe-helper
+usr/bin/myisam_ftdump
+usr/bin/myisamchk
+usr/bin/myisamlog
+usr/bin/myisampack
++usr/bin/mysqld_safe
++usr/bin/wsrep_sst_backup
+usr/bin/wsrep_sst_common
+usr/bin/wsrep_sst_mariabackup
+usr/bin/wsrep_sst_mysqldump
+usr/bin/wsrep_sst_rsync
+usr/bin/wsrep_sst_rsync_wan
+usr/lib/mysql/plugin/auth_ed25519.so
+usr/lib/mysql/plugin/auth_mysql_sha2.so
- usr/lib/mysql/plugin/disks.so
+usr/lib/mysql/plugin/auth_pam_tool_dir/auth_pam_tool
+usr/lib/mysql/plugin/auth_pam_v1.so
++usr/lib/mysql/plugin/auth_pam.so
+usr/lib/mysql/plugin/auth_parsec.so
- usr/share/man/man1/galera_new_cluster.1
- usr/share/man/man1/galera_recovery.1
- usr/share/man/man1/mariadb-service-convert.1
++[linux-any] usr/lib/mysql/plugin/disks.so
+usr/lib/mysql/plugin/file_key_management.so
+usr/lib/mysql/plugin/ha_archive.so
+usr/lib/mysql/plugin/ha_blackhole.so
+usr/lib/mysql/plugin/ha_federated.so
+usr/lib/mysql/plugin/ha_federatedx.so
+usr/lib/mysql/plugin/ha_sphinx.so
+usr/lib/mysql/plugin/handlersocket.so
+usr/lib/mysql/plugin/locales.so
+usr/lib/mysql/plugin/metadata_lock_info.so
+usr/lib/mysql/plugin/password_reuse_check.so
+usr/lib/mysql/plugin/query_cache_info.so
+usr/lib/mysql/plugin/query_response_time.so
+usr/lib/mysql/plugin/server_audit.so
+usr/lib/mysql/plugin/simple_password_check.so
+usr/lib/mysql/plugin/sql_errlog.so
+usr/lib/mysql/plugin/type_mysql_json.so
+usr/lib/mysql/plugin/wsrep_info.so
+usr/share/doc/mariadb-server/mariadbd.sym.gz
+usr/share/man/man1/aria_chk.1
+usr/share/man/man1/aria_dump_log.1
+usr/share/man/man1/aria_ftdump.1
+usr/share/man/man1/aria_pack.1
+usr/share/man/man1/aria_read_log.1
- usr/share/man/man1/wsrep_sst_rsync.1
++[linux-any] usr/share/man/man1/galera_new_cluster.1
++[linux-any] usr/share/man/man1/galera_recovery.1
++[linux-any] usr/share/man/man1/mariadb-service-convert.1
+usr/share/man/man1/mariadbd-multi.1
+usr/share/man/man1/mariadbd-safe-helper.1
+usr/share/man/man1/mariadbd-safe.1
+usr/share/man/man1/myisam_ftdump.1
+usr/share/man/man1/myisamchk.1
+usr/share/man/man1/myisamlog.1
+usr/share/man/man1/myisampack.1
++usr/share/man/man1/mysqld_safe.1
++usr/share/man/man1/wsrep_sst_backup.1
+usr/share/man/man1/wsrep_sst_common.1
+usr/share/man/man1/wsrep_sst_mariabackup.1
+usr/share/man/man1/wsrep_sst_mysqldump.1
- usr/share/mariadb/wsrep.cnf
+usr/share/man/man1/wsrep_sst_rsync_wan.1
++usr/share/man/man1/wsrep_sst_rsync.1
+usr/share/mariadb/mini-benchmark
+usr/share/mariadb/wsrep_notify
++usr/share/mariadb/wsrep.cnf
--- /dev/null
- # Used to check if running in Bash
- bash-term-in-posix-shell '${BASH_VERSION' [usr/share/mysql/wsrep_notify:86]
- bash-term-in-posix-shell '[ "$url" ==' [usr/bin/mariadbd-safe:216]
- # In comment so false-positive
- bash-term-in-posix-shell 'let' [usr/bin/mariadbd-safe:41]
- # Supported in Zsh and Bash (also Dash)
- bash-term-in-posix-shell 'ulimit' [usr/bin/mariadbd-safe:712]
- bash-term-in-posix-shell 'ulimit' [usr/bin/mariadbd-safe:832]
-
- # These are from stop word list
- spelling-error-in-binary noone no one [usr/bin/aria_chk]
- spelling-error-in-binary noone no one [usr/bin/aria_dump_log]
- spelling-error-in-binary noone no one [usr/bin/aria_ftdump]
- spelling-error-in-binary noone no one [usr/bin/aria_pack]
- spelling-error-in-binary noone no one [usr/bin/aria_read_log]
- spelling-error-in-binary noone no one [usr/bin/myisam_ftdump]
- spelling-error-in-binary noone no one [usr/bin/myisamchk]
- spelling-error-in-binary noone no one [usr/bin/myisamlog]
- spelling-error-in-binary noone no one [usr/bin/myisampack]
- spelling-error-in-binary thats that's [usr/bin/aria_chk]
- spelling-error-in-binary thats that's [usr/bin/aria_dump_log]
- spelling-error-in-binary thats that's [usr/bin/aria_ftdump]
- spelling-error-in-binary thats that's [usr/bin/aria_pack]
- spelling-error-in-binary thats that's [usr/bin/aria_read_log]
- spelling-error-in-binary thats that's [usr/bin/myisam_ftdump]
- spelling-error-in-binary thats that's [usr/bin/myisamchk]
- spelling-error-in-binary thats that's [usr/bin/myisamlog]
- spelling-error-in-binary thats that's [usr/bin/myisampack]
- spelling-error-in-binary theres there's [usr/bin/aria_chk]
- spelling-error-in-binary theres there's [usr/bin/aria_dump_log]
- spelling-error-in-binary theres there's [usr/bin/aria_ftdump]
- spelling-error-in-binary theres there's [usr/bin/aria_pack]
- spelling-error-in-binary theres there's [usr/bin/aria_read_log]
- spelling-error-in-binary theres there's [usr/bin/myisam_ftdump]
- spelling-error-in-binary theres there's [usr/bin/myisamchk]
- spelling-error-in-binary theres there's [usr/bin/myisamlog]
- spelling-error-in-binary theres there's [usr/bin/myisampack]
-
- # This is not documentation
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/errmsg-utf8.txt]
++# False positive in Lintian, template is actually used
++unused-debconf-template mariadb-server/old_data_directory_saved [templates:2]
++# MyISAM stopwords that cannot be changed and spelling errors remain
++spelling-error-in-binary noone no one [usr/bin/*]
++spelling-error-in-binary thats that's [usr/bin/*]
++spelling-error-in-binary theres there's [usr/bin/*]
++# Most likely false positive
++hardening-no-fortify-functions [usr/lib/mysql/plugin/auth_pam_v1.so]
++hardening-no-fortify-functions [usr/lib/mysql/plugin/auth_pam.so]
++hardening-no-fortify-functions [usr/lib/mysql/plugin/ha_archive.so]
++hardening-no-fortify-functions [usr/lib/mysql/plugin/ha_blackhole.so]
++hardening-no-fortify-functions [usr/lib/*/security/pam_user_map.so]
++# Special purpose executable to implement custom system permissions
++executable-in-usr-lib [usr/lib/mysql/plugin/auth_pam_tool_dir/auth_pam_tool]
++# Intentional to handle upgrades from versioned package names to versionless
++# (e.g. mariadb-server-10.5 -> mariadb-server)
++uses-dpkg-database-directly [postinst]
--- /dev/null
- . /lib/lsb/init-functions
+#!/bin/bash
+#
+### BEGIN INIT INFO
+# Provides: mariadb
+# Required-Start: $remote_fs $syslog
+# Required-Stop: $remote_fs $syslog
+# Should-Start: $network $named $time
+# Should-Stop: $network $named $time
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: Start and stop the MariaDB database server daemon
+# Description: Controls the main MariaDB database server daemon "mariadbd"
+# and its wrapper script "mariadbd-safe".
+### END INIT INFO
+#
+set -e
+set -u
+${DEBIAN_SCRIPT_DEBUG:+ set -v -x}
+
+test -x /usr/sbin/mariadbd || exit 0
+
+# shellcheck source=/dev/null
- MYADMIN="/usr/bin/mariadb-admin --defaults-file=/etc/mysql/debian.cnf"
++. /usr/lib/lsb/init-functions
+
+SELF="$(cd "$(dirname "$0")"; pwd -P)/$(basename "$0")"
+
+if [ -f /usr/bin/mariadb-admin ]
+then
- MYADMIN="/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf"
++ DEBIAN_CNF_OPT=""
++ if [ -r /etc/mysql/debian.cnf ]; then
++ DEBIAN_CNF_OPT="--defaults-file=/etc/mysql/debian.cnf"
++ fi
++ MYADMIN="/usr/bin/mariadb-admin $DEBIAN_CNF_OPT"
+elif [ -f /usr/bin/mysqladmin ]
+then
- # Make sure that there is some default
- # 30 seconds is fine default for starting
- # maximum is one hour if there is gigantic
- # database
- MARIADB_STARTUP_TIMEOUT=${MYSQLD_STARTUP_TIMEOUT:-30}
-
- for i in {1..3600}
++ DEBIAN_CNF_OPT=""
++ if [ -r /etc/mysql/debian.cnf ]; then
++ DEBIAN_CNF_OPT="--defaults-file=/etc/mysql/debian.cnf"
++ fi
++ MYADMIN="/usr/bin/mysqladmin $DEBIAN_CNF_OPT"
+else
+ log_failure_msg "Command mariadb-admin/mysqladmin not found! This SysV init script depends on it."
+ exit 1
+fi
+
+if [ ! -x /usr/bin/mariadbd-safe ]
+then
+ log_failure_msg "/usr/bin/mariadbd-safe not found or executable! This SysV init script depends on it."
+ exit 1
+fi
+
+# priority can be overridden and "-s" adds output to stderr
+ERR_LOGGER="logger -p daemon.err -t /etc/init.d/mariadb -i"
+
+if [ -f /etc/default/mysql ]
+then
+ # shellcheck source=/dev/null
+ . /etc/default/mysql
+fi
+
+# Also source default/mariadb in case the installation was upgraded from
+# packages originally installed from MariaDB.org repositories, which have
+# had support for reading /etc/default/mariadb since March 2016.
+if [ -f /etc/default/mariadb ]
+then
+ # shellcheck source=/dev/null
+ . /etc/default/mariadb
+fi
+
+# Safeguard (relative paths, core dumps..)
+cd /
+umask 077
+
+# mysqladmin likes to read /root/.my.cnf. This is usually not what I want
+# as many admins e.g. only store a password without a username there and
+# so break my scripts.
+export HOME=/etc/mysql/
+
+## Fetch a particular option from mysql's invocation.
+#
+# Usage: void mariadbd_get_param option
+mariadbd_get_param() {
+ /usr/sbin/mariadbd --print-defaults \
+ | tr " " "\n" \
+ | grep -- "--$1" \
+ | tail -n 1 \
+ | cut -d= -f2
+}
+
+## Do some sanity checks before even trying to start mariadbd.
+sanity_checks() {
+ # check for config file
+ if [ ! -r /etc/mysql/my.cnf ]
+ then
+ log_warning_msg "$0: WARNING: /etc/mysql/my.cnf cannot be read. See README.Debian.gz"
+ echo "WARNING: /etc/mysql/my.cnf cannot be read. See README.Debian.gz" | $ERR_LOGGER
+ fi
+
+ # check for diskspace shortage
+ datadir="$(mariadbd_get_param datadir)"
+
+ # If datadir location is not customized in configuration
+ # then it's not printed with /usr/sbin/mariadbd --print-defaults
+ # and this should fall back to a sane default value
+ if [ -z "$datadir" ]
+ then
+ datadir="/var/lib/mysql"
+ fi
+
+ # Verify the datadir location exists
+ if [ ! -d "$datadir" ] && [ ! -L "$datadir" ]
+ then
+ log_failure_msg "$0: ERROR: Can't locate MariaDB data location at $datadir"
+ echo "ERROR: Can't locate MariaDB data location at $datadir" | $ERR_LOGGER
+ exit 1
+ fi
+
+ # As preset blocksize of GNU df is 1024 then available bytes is $df_available_blocks * 1024
+ # 4096 blocks is then lower than 4 MB
+ df_available_blocks="$(LC_ALL=C BLOCKSIZE='' df --output=avail "$datadir" | tail -n 1)"
+ if [ "$df_available_blocks" -lt "4096" ]
+ then
+ log_failure_msg "$0: ERROR: The partition with $datadir is too full!"
+ echo "ERROR: The partition with $datadir is too full!" | $ERR_LOGGER
+ exit 1
+ fi
+}
+
+## Checks if there is a server running and if so if it is accessible.
+#
+# check_alive insists on a pingable server
+# check_dead also fails if there is a lost mariadbd in the process list
+#
+# Usage: boolean mariadbd_status [check_alive|check_dead] [warn|nowarn]
+mariadbd_status () {
+ ping_output="$($MYADMIN ping 2>&1)"
+ # The whole mariadbd_status function should be rewritten in clean shell script,
+ # so ignore minor Shellcheck nag for now as fixing it would be half of the
+ # rewrite
+ # shellcheck disable=SC2181
+ ping_alive="$(( ! $? ))"
+
+ ps_alive=0
+ pidfile="$(mariadbd_get_param pid-file)"
+ if [ -f "$pidfile" ] && ps "$(cat "$pidfile")" >/dev/null 2>&1
+ then
+ ps_alive=1
+ fi
+
+ # Using '-a' is unstandard, but it works and might be needed for the grouping
+ # of the if-else, so keep it and just ignore in Shellcheck
+ # shellcheck disable=SC2166
+ if [ "$1" = "check_alive" -a $ping_alive = 1 ] ||
+ [ "$1" = "check_dead" -a $ping_alive = 0 -a $ps_alive = 0 ]
+ then
+ return 0 # EXIT_SUCCESS
+ else
+ if [ "$2" = "warn" ]
+ then
+ echo -e "$ps_alive processes alive and '$MYADMIN ping' resulted in\n$ping_output\n" | $ERR_LOGGER -p daemon.debug
+ fi
+ return 1 # EXIT_FAILURE
+ fi
+}
+
+#
+# main()
+#
+
+case "${1:-''}" in
+
+ 'start')
+ sanity_checks;
+ # Start daemon
+ log_daemon_msg "Starting MariaDB database server" "mariadbd"
+ if mariadbd_status check_alive nowarn
+ then
+ log_progress_msg "already running"
+ log_end_msg 0
+ else
+ # Could be removed during boot
+ test -e /run/mysqld || install -m 755 -o mysql -g root -d /run/mysqld
+
+ # Start MariaDB!
+ /usr/bin/mariadbd-safe "${@:2}" 2>&1 >/dev/null | $ERR_LOGGER &
+
- if [ "${i}" -gt "${MARIADB_STARTUP_TIMEOUT}" ]
- then
- break
- fi
++ for _ in $(seq 1 "${MYSQLD_STARTUP_TIMEOUT:-30}")
+ do
- killall -15 mariadbd
+ sleep 1
+ if mariadbd_status check_alive nowarn
+ then
+ break
+ fi
+ log_progress_msg "."
+ done
+ if mariadbd_status check_alive warn
+ then
+ log_end_msg 0
+ # Now start mysqlcheck or whatever the admin wants.
+ output=$(/etc/mysql/debian-start)
+ if [ -n "$output" ]
+ then
+ log_action_msg "$output"
+ fi
+ else
+ # Try one more time but save error log separately, then spit it out
+ # before logging ends and init script execution ends.
+ if pgrep -ax mariadbd > /dev/null
+ then
+ echo "ERROR: The mariadbd process is running but not responding:"
+ # shellcheck disable=SC2009
+ # Show the mariadbd process and it's parent and next line (if there is a child process)
+ ps faxu | grep mariadbd -C 1
+ else
+ ERROR_LOG_FILE="$(mktemp).err"
+ echo # ensure newline
+ timeout --kill-after=20 10 /usr/bin/mariadbd-safe "${@:2}" --log-error="$ERROR_LOG_FILE"
+ echo "Running '/etc/init.d/mariadb start' failed with error log:"
+ cat "$ERROR_LOG_FILE"
+ fi
+
+ log_end_msg 1
+ log_failure_msg "Please take a look at the syslog"
+ fi
+ fi
+ ;;
+
+ 'stop')
+ # * As a passwordless mysqladmin (e.g. via ~/.my.cnf) must be possible
+ # at least for cron, we can rely on it here, too. (although we have
+ # to specify it explicit as e.g. sudo environments points to the normal
+ # users home and not /root)
+ log_daemon_msg "Stopping MariaDB database server" "mariadbd"
+ if ! mariadbd_status check_dead nowarn
+ then
+ set +e
+ shutdown_out="$($MYADMIN shutdown 2>&1)"
+ r=$?
+ set -e
+ if [ "$r" -ne 0 ]
+ then
+ log_end_msg 1
+ [ "$VERBOSE" != "no" ] && log_failure_msg "Error: $shutdown_out"
+ log_daemon_msg "Killing MariaDB database server by signal" "mariadbd"
- killall -9 mariadbd
++ killall -15 mariadbd || killall -15 mysqld
+ server_down=
+ for _ in {1..600}
+ do
+ sleep 1
+ if mariadbd_status check_dead nowarn
+ then
+ server_down=1
+ break
+ fi
+ done
+ if test -z "$server_down"
+ then
++ killall -9 mariadbd || killall -9 mysqld
+ fi
+ fi
+ fi
+
+ if ! mariadbd_status check_dead warn
+ then
+ log_end_msg 1
+ log_failure_msg "Please stop MariaDB manually and read /usr/share/doc/mariadb-server/README.Debian.gz!"
+ exit 1
+ else
+ log_end_msg 0
+ fi
+ ;;
+
+ 'restart')
+ set +e; $SELF stop; set -e
+ shift
+ $SELF start "${@}"
+ ;;
+
+ 'reload'|'force-reload')
+ log_daemon_msg "Reloading MariaDB database server" "mariadbd"
+ $MYADMIN reload
+ log_end_msg 0
+ ;;
+
+ 'status')
+ if mariadbd_status check_alive nowarn
+ then
+ log_action_msg "$($MYADMIN version)"
+ else
+ log_action_msg "MariaDB is stopped."
+ exit 3
+ fi
+ ;;
+
+ 'bootstrap')
+ # Bootstrap the cluster, start the first node
+ # that initiates the cluster
+ log_daemon_msg "Bootstrapping the cluster" "mariadbd"
+ $SELF start "${@:2}" --wsrep-new-cluster
+ ;;
+
+ *)
+ echo "Usage: $SELF start|stop|restart|reload|force-reload|status"
+ exit 1
+ ;;
+esac
--- /dev/null
- echo "UPDATE mysql.user SET plugin='unix_socket' WHERE plugin='auth_socket';" | \
+#!/bin/bash
+set -e
+
+# shellcheck source=/dev/null
+. /usr/share/debconf/confmodule
+
+if [ -n "$DEBIAN_SCRIPT_DEBUG" ]
+then
+ set -v -x
+ DEBIAN_SCRIPT_TRACE=1
+fi
+
+${DEBIAN_SCRIPT_TRACE:+ echo "#42#DEBUG# RUNNING $0 $*" 1>&2}
+
+export PATH=$PATH:/sbin:/usr/sbin:/bin:/usr/bin
+
+# This command can be used as pipe to syslog. With "-s" it also logs to stderr.
+ERR_LOGGER="logger -p daemon.err -t mariadb-server.postinst -i"
+# Specify syslog tag name so it is clear the entry came from this postinst script.
+# This will make an error in a logged command immediately apparent by aborting
+# the install, rather than failing silently and leaving a broken install.
+set -o pipefail
+
+case "$1" in
+ configure)
+ # This is needed because mariadb-install-db removes the pid file in /run
+ # and because changed configuration options should take effect immediately.
+ # In case the server wasn't running at all it should be ok if the stop
+ # script fails. I can't tell at this point because of the cleaned /run.
+ set +e
+ invoke-rc.d mariadb stop
+ set -e
+
+ # An existing /etc/init.d/mysql might be on the system if there was a
+ # previous MySQL or MariaDB installation, since /etc/init.d files are
+ # considered config files and stay around even after the package is removed.
+ #
+ # The install step of this package adds a new /etc/init.d/mariadb file. As
+ # we also want to ensure that there are no old (and potentially outdated)
+ # versions of /etc/init.d/mysql we simply replace it using a copy of the
+ # latest 'mariadb' file. This has also the added benefit that anything that
+ # invokes traditional sysv init with either 'mysql' or 'mariadb' will end up
+ # controlling this newly installed MariaDB, and thus we maintain better
+ # backwards compatibility.
+ #
+ # Note that the 'Provides' line is also updated to avoid 'insserv' exiting
+ # on failure (when it is run by update-rc.d) because of duplicate service
+ # names.
+ if [ -f "/etc/init.d/mysql" ] && [ -f "/etc/init.d/mariadb" ]
+ then
+ # Copy init file and rename the service name and filename on the fly
+ sed 's/Provides: mariadb/Provides: mysql/g' /etc/init.d/mariadb > /etc/init.d/mysql
+ # NOTE: Number of spaces/tabs is important here!
+ # Confirm if the sed worked
+ if ! grep --quiet "Provides: mysql" /etc/init.d/mysql
+ then
+ # If not, then delete the file to avoid failures later on
+ rm -f /etc/init.d/mysql
+ echo "Warning! Failed creating a mysql named copy of mariadb init.d file"
+ fi
+ fi
+
+ mariadb_statedir=/usr/share/mariadb
+ mariadb_datadir=/var/lib/mysql
+ mariadb_logdir=/var/log/mysql
+ mariadb_cfgdir=/etc/mysql
+ mariadb_upgradedir=/var/lib/mysql-upgrade
+
++ # Ensure mysql user/group exists before any ownership fixes or
++ # mariadb-install-db runs. Note that systemd-sysusers operates on
++ # /etc/passwd and /etc/group directly.
++ if ! getent passwd mysql >/dev/null 2>&1 || ! getent group mysql >/dev/null 2>&1
++ then
++ systemd-sysusers ${DPKG_ROOT:+--root="$DPKG_ROOT"} mariadb.conf
++ fi
++
+ # If the following symlink exists, it is a preserved copy the old data dir
+ # created by the preinst script during a upgrade that would have otherwise
+ # been replaced by an empty mysql dir. This should restore it.
+ for dir in DATADIR LOGDIR
+ do
+
+ if [ "$dir" = "DATADIR" ]
+ then
+ targetdir=$mariadb_datadir
+ else
+ targetdir=$mariadb_logdir
+ fi
+
+ savelink="$mariadb_upgradedir/$dir.link"
+ if [ -L "$savelink" ]
+ then
+ # If the targetdir was a symlink before we upgraded it is supposed
+ # to be either still be present or not existing anymore now.
+ if [ -L "$targetdir" ]
+ then
+ rm "$savelink"
+ elif [ ! -d "$targetdir" ]
+ then
+ mv "$savelink" "$targetdir"
+ else
+ # this should never even happen, but just in case...
+ mariadb_tmp=$(mktemp -d -t mariadb-symlink-restore-XXXXXX)
+ echo "this is very strange! see $mariadb_tmp/README..." >&2
+ mv "$targetdir" "$mariadb_tmp"
+ cat << EOF > "$mariadb_tmp/README"
+
+If you're reading this, it's most likely because you had replaced /var/lib/mysql
+with a symlink, then upgraded to a new version of mysql, and then dpkg
+removed your symlink (see #182747 and others). The mysql packages noticed
+that this happened, and as a workaround have restored it. However, because
+/var/lib/mysql seems to have been re-created in the meantime, and because
+we don't want to rm -rf something we don't know as much about, we are going
+to leave this unexpected directory here. If your database looks normal,
+and this is not a symlink to your database, you should be able to blow
+this all away.
+
+EOF
+ fi
+ fi
+ rmdir $mariadb_upgradedir 2>/dev/null || true
+
+ done # end 'for dir' loop
+
+ # Upgrading from mysql.com needs might have the root user as auth_socket.
+ # auto.cnf is a sign of a mysql install, that doesn't exist in mariadb.
+ # We use lsof to protect against concurrent access by mysqld (mariadb has
+ # its own projection). We make sure we're not doing this on a MySQL-8.0
+ # directory.
+ # This direct update is needed to enable an authentication mechanism to
+ # perform mariadb-upgrade, (MDEV-22678). To keep the impact minimal, we
+ # skip innodb and set key-buffer-size to 0 as it isn't reused.
+ if [ -f "$mariadb_datadir/auto.cnf" ] &&
+ [ -f "$mariadb_datadir/mysql/user.MYD" ] &&
+ ! lsof -nt "$mariadb_datadir"/mysql/user.MYD > /dev/null &&
+ [ ! -f "$mariadb_datadir/undo_001" ]
+ then
- # When creating an ext3 jounal on an already mounted filesystem like e.g.
++ echo "UPDATE mysql.user SET plugin='unix_socket' WHERE plugin='auth_socket';" |
+ mariadbd --skip-innodb --key_buffer_size=0 --default-storage-engine=MyISAM --bootstrap 2> /dev/null
+ fi
+
+ # Ensure the existence and right permissions for the database and
+ # log files. Use mkdir option 'Z' to create with correct SELinux context.
+ if [ ! -d "$mariadb_statedir" ] && [ ! -L "$mariadb_statedir" ]
+ then
+ mkdir -Z "$mariadb_statedir"
+ fi
+ if [ ! -d "$mariadb_datadir" ] && [ ! -L "$mariadb_datadir" ]
+ then
+ mkdir -Z "$mariadb_datadir"
+ fi
+ if [ ! -d "$mariadb_logdir" ] && [ ! -L "$mariadb_logdir" ]
+ then
+ mkdir -Z "$mariadb_logdir"
+ fi
- find $mariadb_statedir ! -uid 0 -print0 -or ! -gid 0 -print0 | xargs -0 -r sudo chown 0:0
- find $mariadb_datadir ! -uid "$(id -u mysql)" -print0 | xargs -0 -r chown mysql
- chown mysql:adm $mariadb_logdir
++ # When creating an ext3 journal on an already mounted filesystem like e.g.
+ # /var/lib/mysql, you get a .journal file that is not modifiable by chown.
+ # The mariadb_statedir must not be writable by the mysql user under any
+ # circumstances as it contains scripts that are executed by root.
+ set +e
- chmod 2750 $mariadb_logdir
++ find "$mariadb_statedir" \( ! -uid 0 -o ! -gid 0 \) -print0 | xargs -0 -r chown 0:0
++ find "$mariadb_datadir" ! -uid "$(id -u mysql)" -print0 | xargs -0 -r chown mysql
++ find "$mariadb_datadir" -follow -not -group mysql -print0 2>/dev/null \
++ | xargs -0 --no-run-if-empty chgrp mysql
++ chown mysql:adm "$mariadb_logdir"
+ find "$mariadb_logdir" -print0 | xargs -0 -r chown mysql:adm
- # run the PAM authetications, which need root (e.g. to validate passwords
++ chmod 2750 "$mariadb_logdir"
+ set -e
+
+ ## Set the correct filesystem ownership for the PAM v2 plugin
+ # eg. /usr/lib/x86_64-linux-gnu/mysql/plugin/auth_pam_tool_dir/
+ # NOTE! This is security sensitive, don't allow for a race condition.
+ #
+ # 1. Drop privileges of directory
+ # -> At this point only root can see and execute auth_pam_tool
+ chmod 0700 /usr/lib/mysql/plugin/auth_pam_tool_dir
+ #
+ # 2. Make binary setuid
+ # -> At this point only root can run the setuid binary so no escalation here yet
+ chmod 04755 /usr/lib/mysql/plugin/auth_pam_tool_dir/auth_pam_tool
+ #
+ # 3. Allow user 'mysql' to see and execute auth_pam_tool
+ # -> Now user mysql owns the directory and can see and execute the binary inside
+ # -> Since the binary is setuid, user mysql gets limited root powers here to
- # mariadb-server version from Woody lying around which used the same
++ # run the PAM authentications, which need root (e.g. to validate passwords
+ # against /etc/shadow)
+ chown mysql /usr/lib/mysql/plugin/auth_pam_tool_dir
+
+ # This is important to avoid dataloss when there is a removed
- --skip-test-db 2>&1 | \
++ # mysql-server version from Woody lying around which used the same
+ # data directory and then somehow gets purged by the admin.
+ db_set mariadb-server/postrm_remove_database false || true
+
+ # Clean up old flags before setting new one
+ rm -f $mariadb_datadir/debian-*.flag
+ # Flag data dir to avoid downgrades
+ # @TODO: Rewrite this to use the new upstream /var/lib/mysql_upgrade_info file
+ # instead of the legacy /var/lib/debian-XX.X.flag file
+ touch "$mariadb_datadir/debian-__MARIADB_MAJOR_VER__.flag"
+
+ # initiate databases. Output is not allowed by debconf :-(
+ # This will fail if we are upgrading an existing database; in this case
+ # mariadb-upgrade, called from the /etc/mysql/debian-start script, will
+ # handle things.
+ # Debian: beware of the bashisms...
+ # Debian: can safely run on upgrades with existing databases
+ # Workaround for Debian Bug #1022994: failure to create database when
+ # working with libpam-tmpdir (by setting TMPDIR to empty value).
+ set +e
+ TMPDIR='' bash /usr/bin/mariadb-install-db \
+ --rpm --cross-bootstrap \
+ --user=mysql --disable-log-bin \
- feedback_cnf=$mariadb_cfgdir/mariadb.conf.d/feedback.cnf
- if [ ! -f $feedback_cnf ]; then
- if db_input high mariadb-server/feedback_optin; then
- db_go || true
- fi
- db_get mariadb-server/feedback_optin
- {
- echo "# THIS IS A GENERATED FILE. ALL CHANGES TO IT MIGHT BE LOST.";
- echo "[server]";
- if [ "$RET" = true ]; then
- echo "feedback=ON";
- else
- echo "feedback=OFF";
- fi
- } >> $feedback_cnf
- fi
-
++ --skip-test-db 2>&1 |
+ $ERR_LOGGER
+ set -e
+
+ # On new installations root user can connect via unix_socket.
+ # But on upgrades, scripts rely on debian-sys-maint user and
+ # credentials in /etc/mysql/debian.cnf
+ # All tools use --defaults-file=/etc/mysql/debian.cnf
+ # And while it's not needed for new installations, we keep using
+ # --defaults-file option for tools (for the sake of upgrades)
+ # and thus need /etc/mysql/debian.cnf to exist, even if it's empty.
+ # In the long run the goal is to obsolete this file.
+ dc="$mariadb_cfgdir/debian.cnf"
+ if [ ! -d "$mariadb_cfgdir" ]
+ then
+ install -o 0 -g 0 -m 0755 -d $mariadb_cfgdir
+ fi
+
+ if [ ! -e "$dc" ]
+ then
+ cat /dev/null > $dc
+ {
+ echo "# THIS FILE IS OBSOLETE. STOP USING IT IF POSSIBLE.";
+ echo "# This file exists only for backwards compatibility for";
+ echo "# tools that run '--defaults-file=/etc/mysql/debian.cnf'";
+ echo "# and have root level access to the local filesystem.";
+ echo "# With those permissions one can run 'mariadb' directly";
+ echo "# anyway thanks to unix socket authentication and hence";
+ echo "# this file is useless. See package README for more info.";
+ echo "[client]";
+ echo "host = localhost";
+ echo "user = root";
+ echo "[mariadb_upgrade]";
+ echo "host = localhost";
+ echo "user = root";
+ echo "# THIS FILE WILL BE REMOVED IN A FUTURE DEBIAN RELEASE.";
+ } >> $dc
+ fi
+ # Keep it only root-readable, as it always was
+ chown 0:0 $dc
+ chmod 0600 $dc
+
- profile="/etc/apparmor.d/usr.sbin.mariadbd"
+ # If there is a real AppArmor profile, we reload it.
+ # If the default empty profile is installed, then we remove any old
+ # profile that may be loaded.
+ # This allows upgrade from old versions (that have an apparmor profile
+ # on by default) to work both to disable a default profile, and to keep
+ # any profile installed and maintained by users themselves.
- # @TODO: Remove once buildbot.askmonty.org has been updated not to expect this file
- mkdir -p /etc/systemd/system/mariadb.service.d/
- # Note that file cannot be empty, otherwise systemd version in Ubuntu Bionic
- # will think the service is masked
- echo "# empty placeholder" > /etc/systemd/system/mariadb.service.d/migrated-from-my.cnf-settings.conf
++ profile="/etc/apparmor.d/mariadbd"
+ if [ -f "$profile" ] && aa-status --enabled 2> /dev/null
+ then
+ if grep -q /usr/sbin/mariadbd "$profile" 2> /dev/null
+ then
+ apparmor_parser -r "$profile" || true
+ else
+ echo "/usr/sbin/mariadbd { }" | apparmor_parser --remove 2> /dev/null || true
+ fi
+ fi
+
+ # The introduction of /etc/logrotate.d/mariadb has made the old config
+ # obsolete and it needs to be disabled to prevent logrotate running twice.
+ if [ -f /etc/logrotate.d/mysql-server ]
+ then
+ mv -vf /etc/logrotate.d/mysql-server /etc/logrotate.d/mysql-server.dpkg-bak
+ fi
+
-
++ # The introduction of versionless server package is not fully backwards
++ # compatible as the purge of an old mariadb-server-x.y package would
++ # commands such as 'deb-systemd-helper purge mariadb.service' and
++ # 'update-rc.d mariadb remove'. Fix it by simply deleting any existing postrm
++ # stanzas opportunistically.
++ for old_postrm_file in /var/lib/dpkg/info/mariadb-server-10.?.postrm
++ do
++ # For loop will always run, but the globbing pattern will be expanded into
++ # something only if there are files that match the pattern, so we need to
++ # not act on it if the result is just the globbing pattern itself.
++ if [ "$old_postrm_file" != "/var/lib/dpkg/info/mariadb-server-10.?.postrm" ]
++ then
++ sed '/Automatically added by dh_installinit/,/End automatically added section/d' \
++ -i "$old_postrm_file" || true
++ sed '/Automatically added by dh_systemd_enable/,/End automatically added section/d' \
++ -i "$old_postrm_file" || true
++ fi
++ done
+ ;;
+
+ abort-upgrade|abort-remove|abort-configure)
+ ;;
+
+ triggered)
+ if [ -d /run/systemd/system ]
+ then
+ systemctl --system daemon-reload
+ elif [ -x /etc/init.d/mariadb ]
+ then
+ invoke-rc.d mariadb restart
+ fi
+ ;;
+
+ *)
+ echo "postinst called with unknown argument '$1'" 1>&2
+ exit 1
+ ;;
+esac
+
+db_stop # in case invoke fails
+
+#DEBHELPER#
--- /dev/null
-
- # Modified dh_systemd_start snippet that's not added automatically
- if [ -d /run/systemd/system ]
- then
- systemctl --system daemon-reload >/dev/null || true
- fi
+#!/bin/bash
+set -e
+
+# shellcheck source=/dev/null
+. /usr/share/debconf/confmodule
+
+if [ -n "$DEBIAN_SCRIPT_DEBUG" ]
+then
+ set -v -x
+ DEBIAN_SCRIPT_TRACE=1
+fi
+
+${DEBIAN_SCRIPT_TRACE:+ echo "#42#DEBUG# RUNNING $0 $*" 1>&2 }
+
+#
+# - Purge logs and data only if they are ours (#307473)
+# - Remove the mysql user only after all his owned files are purged.
+# - Cleanup the initscripts only if this was the last provider of them
+#
+if [ "$1" = "purge" ] && [ -f "/var/lib/mysql/debian-__MARIADB_MAJOR_VER__.flag" ]
+then
+ # we remove the mysql user only after all his owned files are purged
+ rm -f /var/log/mysql.{log,err}{,.0,.[1234567].gz}
+ rm -rf /var/log/mysql
+
+ db_input high "mariadb-server/postrm_remove_databases" || true
+ db_go || true
+ db_get "mariadb-server/postrm_remove_databases" || true
+ if [ "$RET" = "true" ]
+ then
+ # never remove the debian.cnf when the databases are still existing
+ # else we ran into big trouble on the next install!
+ rm -f /etc/mysql/debian.cnf
+ # Remove all contents from /var/lib/mysql except if it's a
+ # directory with file system data. See #829491 for details and
+ # #608938 for potential mysql-server leftovers which erroneously
+ # had been renamed.
+ # Attempt removal only if the directory hasn't already been removed
+ # by dpkg to avoid failing on "No such file or directory" errors.
+ if [ -d /var/lib/mysql ]
+ then
+ find /var/lib/mysql -mindepth 1 \
+ -not -path '*/lost+found/*' -not -name 'lost+found' \
+ -not -path '*/lost@002bfound/*' -not -name 'lost@002bfound' \
+ -delete
+
+ # "|| true" still needed as rmdir still exits with non-zero if
+ # /var/lib/mysql is a mount point
+ rmdir --ignore-fail-on-non-empty /var/lib/mysql || true
+ fi
+ rm -rf /run/mysqld # this directory is created by the init script, don't leave behind
+ userdel mysql || true
+ fi
+
+fi
+
+#DEBHELPER#
--- /dev/null
- #!/bin/bash
++#!/bin/bash -e
+#
+# summary of how this script can be called:
+# * <new-preinst> install
+# * <new-preinst> install <old-version>
+# * <new-preinst> upgrade <old-version>
+# * <old-preinst> abort-upgrade <new-version>
+#
+
- set -e
-
+# shellcheck source=/dev/null
+. /usr/share/debconf/confmodule
+
+# Just kill the invalid insserv.conf.d directory without fallback
+if [ -d "/etc/insserv.conf.d/mariadb/" ]
+then
+ rm -rf "/etc/insserv.conf.d/mariadb/"
+fi
+
+if [ -n "$DEBIAN_SCRIPT_DEBUG" ]
+then
+ set -v -x
+ DEBIAN_SCRIPT_TRACE=1
+fi
+${DEBIAN_SCRIPT_TRACE:+ echo "#42#DEBUG# RUNNING $0 $*" 1>&2 }
+
+export PATH=$PATH:/sbin:/usr/sbin:/bin:/usr/bin
+mariadb_datadir=/var/lib/mysql
+mariadb_upgradedir=/var/lib/mysql-upgrade
+
+MARIADBD_USERS="root"
+
+# Check if user 'mysql' exists before referring to it in pgrep
+# to avoid pgrep erroring on 'invalid user name'
+if id mysql >/dev/null 2>&1
+then
+ MARIADBD_USERS="$MARIADBD_USERS,mysql"
+fi
+
+# Try to stop the server in a sane way. If it does not success let the admin
+# do it himself. No database directories should be removed while the server
+# is running! Another mariadbd in e.g. a different chroot is fine for us.
+stop_server() {
+ # Return immediately if there are no mysqld processes running on a host
+ # (leave containerized processes with the same name in other namespaces)
+ # as there is no point in trying to shutdown in that case.
+ if ! pgrep -x -u "$MARIADBD_USERS" --nslist pid --ns $$ "mysqld|mariadbd" > /dev/null
+ then
+ return
+ fi
+
+ set +e
+ invoke-rc.d mariadb stop
+ invoke-rc.d mysql stop # Backwards compatibility
+ errno=$?
+ set -e
+
+ # systemctl could emit exit code 100=no init script (fresh install)
+ if [ "$errno" != 0 ] && [ "$errno" != 100 ]
+ then
+ echo "Attempt to stop MariaDB/MySQL server returned exitcode $errno" 1>&2
+ echo "There is a MariaDB/MySQL server running, but we failed in our attempts to stop it." 1>&2
- echo "Stop it yourself and try again!" 1>&2
++ echo "Check if there is any server running with 'pgrep -af \"mysqld|mariadbd\"' and" 1>&2
++ echo "try to stop it yourself by issuing 'invoke-rc.d mariadb stop'." 1>&2
+ db_stop
+ exit 1
+ fi
+}
+
+################################ main() ##########################
+
+# @TODO: Rewrite this to use the new upstream /var/lib/mysql_upgrade_info file
+# instead of the legacy /var/lib/debian-XX.X.flag file
+this_version=__MARIADB_MAJOR_VER__
+max_upgradeable_version=5.7
+
+# Check if a flag file is found that indicates a previous MariaDB or MySQL
+# version was installed. If multiple flags are found, check which one was
+# the biggest version number.
+for flag in "$mariadb_datadir"/debian-*.flag
+do
+
+ # The for loop leaves $flag as the query string if there are no results,
+ # so the check below is needed to stop further processing when there are
+ # no real results.
+ if [ "$flag" = "$mariadb_datadir/debian-*.flag" ]
+ then
+ break
+ fi
+
+ # The whole flag_version thing should be rewritten, so ignore minor Shellcheck
+ # nag for now
+ # shellcheck disable=SC2001
+ flag_version=$(echo "$flag" | sed 's/.*debian-\([0-9\.]\+\).flag/\1/')
+
+ # Initialize value if empty
+ if [ -z "$found_version" ]
+ then
+ found_version=$flag_version
+ fi
+
+ # Update value if now bigger then before
+ if dpkg --compare-versions "$flag_version" '>>' "$found_version"
+ then
+ found_version=$flag_version
+ fi
+
+done
+
+
+# If an upgrade is detected, proceed with it automatically without
+# requiring any user interaction.
+#
+# However, if the user attempts to downgrade, warn about the incompatibility.
+# Downgrade is detected if the flag version is bigger than $this_version
+# (e.g. 10.1 > 10.0) or the flag version is smaller than 10.0 but bigger
+# than $max_upgradeable_version.
+if [ -n "$found_version" ]
+then
+
+ # MySQL 8.0 in Ubuntu has a bug in packaging and the file is name wrongly
+ # 'debian-5.7.flag', so in case '5.7' was encountered an extra check needs to
+ # be done to see is there is a file called undo_001, which is a sign of 8.0.
+ if [ "$found_version" == "5.7" ] && [ -f "$mariadb_datadir/undo_001" ]
+ then
+ # Seems to be a 8.0, flag has wrongly 5.7 (know bug)
+ found_version=8.0
+ fi
+
+ echo "$mariadb_datadir: found previous version $found_version"
+
+ if dpkg --compare-versions "$found_version" '>>' "$this_version"
+ then
+ downgrade_detected=true
+ fi
+
+ if dpkg --compare-versions "$found_version" '>>' "$max_upgradeable_version" \
+ && dpkg --compare-versions "$found_version" '<<' "10.0"
+ then
+ downgrade_detected=true
+ fi
+
+fi
+
+# If there is no debian-*.flag, and no version was detected, but a file that
+# indicated MySQL 8.0 is found (undo_001 is created by default in MySQL 8.0+
+# installs), then that file is enough of additional indication to trigger the
+# move of the data directory.
+if [ -z "$found_version" ] &&
+ [ -z "$(find $mariadb_datadir/debian-*.flag 2> /dev/null)" ] &&
+ [ -f "$mariadb_datadir/undo_001" ]
+then
- echo "$mariadb_datadir: no server version flag found, assuming MySQL 8.0 data encountered"
++ echo "$mariadb_datadir: no server version flag found, assuming MySQL 8.0 data encountered" 1>&2
+ downgrade_detected=true
+ found_version="previous" # Just use dummy name as we don't know real version
+fi
+
+# Don't abort dpkg if downgrade is detected (as was done previously).
+# Instead simply move the old datadir and create a new for this_version.
+if [ -n "$downgrade_detected" ]
+then
+ db_input critical "mariadb-server/old_data_directory_saved" || true
+ db_go
- echo "The file $mariadb_datadir/debian-$found_version.flag indicates a" 1>&2
++ echo "The contents of $mariadb_datadir/ indicates a" 1>&2
+ echo "version that cannot automatically be upgraded. Therefore the" 1>&2
+ echo "previous data directory will be renamed to $mariadb_datadir-$found_version and" 1>&2
+ echo "a new data directory will be initialized at $mariadb_datadir." 1>&2
+ echo "Please manually export/import your data (e.g. with mysqldump) if needed." 1>&2
+ mv -f "$mariadb_datadir" "$mariadb_datadir-$found_version"
+ # Also move away the old debian.cnf file that included credentials that are
+ # no longer valid. If none existed, ignore error and let dpkg continue.
+ mv -f /etc/mysql/debian.cnf "/etc/mysql/debian.cnf-$found_version" || true
+fi
+
+# to be sure
+stop_server
+
- # If we use NIS then errors should be tolerated. It's up to the
- # user to ensure that the mysql user is correctly setup.
- # Beware that there are two ypwhich one of them needs the 2>/dev/null!
- if test -n "$(command -v ypwhich 2>/dev/null)" && ypwhich > /dev/null 2>&1
- then
- set +e
- fi
-
- #
- # Now we have to ensure the following state:
- # /etc/passwd: mysql:x:100:101:MariaDB Server:/nonexistent:/bin/false
- # /etc/group: mysql:x:101:
- #
- # Sadly there could any state be present on the system so we have to
- # modify everything carefully i.e. not doing a chown before creating
- # the user etc...
- #
-
- # creating mysql group if he isn't already there
- if ! getent group mysql >/dev/null
- then
- # Adding system group: mysql.
- addgroup --system mysql >/dev/null
- fi
-
- # creating mysql user if he isn't already there
- if ! getent passwd mysql >/dev/null
- then
- # Adding system user: mysql.
- adduser \
- --system \
- --disabled-login \
- --ingroup mysql \
- --no-create-home \
- --home /nonexistent \
- --gecos "MariaDB Server" \
- --shell /bin/false \
- mysql >/dev/null 2>&1
- fi
-
- # end of NIS tolerance zone
- set -e
-
+# if there's a symlink, let's store where it's pointing, because otherwise
+# it's going to be lost in some situations
+for dir in DATADIR LOGDIR
+do
+ checkdir=$(eval echo "$"$dir)
+ if [ -L "$checkdir" ]
+ then
+ # Use mkdir option 'Z' to create with correct SELinux context.
+ mkdir -pZ "$mariadb_upgradedir"
+ cp -dT "$checkdir" "$mariadb_upgradedir/$dir.link"
+ fi
+done
+
+# creating mysql home directory
+if [ ! -d $mariadb_datadir ] && [ ! -L $mariadb_datadir ]
+then
+ # Use mkdir option 'Z' to create with correct SELinux context.
+ mkdir -Z $mariadb_datadir
+fi
+
+# As preset blocksize of GNU df is 1024 then available bytes is $df_available_blocks * 1024
+# 4096 blocks is then lower than 4 MB
+df_available_blocks="$(LC_ALL=C BLOCKSIZE='' df --output=avail "$mariadb_datadir" | tail -n 1)"
+if [ "$df_available_blocks" -lt "4096" ]
+then
+ echo "ERROR: There's not enough space in $mariadb_datadir/" 1>&2
+ db_stop
+ exit 1
+fi
+
- # Since the home directory was created before putting the user into
- # the mysql group and moreover we cannot guarantee that the
- # permissions were correctly *before* calling this script, we fix them now.
- # In case we use NIS and no mysql user is present then this script should
- # better fail now than later..
- # The "set +e" is necessary as e.g. a ".journal" of a ext3 partition is
- # not chgrp'able (#318435).
- set +e
- find $mariadb_datadir ! -uid "$(id -u mysql)" -print0 | xargs -0 -r chown mysql
- find $mariadb_datadir -follow -not -group mysql -print0 2>/dev/null \
- | xargs -0 --no-run-if-empty chgrp mysql
- set -e
-
+db_stop
+
+#DEBHELPER#
++
++# dh_installinit/13.11.3 adds this check but only with 'install', so we need to
++# have and extra one to check 'upgrade'. This ensures that upgrades from
++# mariadb-server-x.y to mariadb-server (without version suffix) ends up with
++# the executable bit set on /etc/init.d/mariadb, which otherwise would end up
++# disabled due to the mariadb-server-x.y.postrm being triggered.
++# $1 = upgrade
++# $2 = 1:10.6.11-2
++if [ "$1" = "upgrade" ] && [ -n "$2" ] && [ -e "/etc/init.d/mariadb" ]
++then
++ chmod +x "/etc/init.d/mariadb" >/dev/null || true
++fi
++
++# dh_installinit/13.11.3 adds this check but with extra condition that there
++# must be a version passed as '$2', but that will always be empty when install
++# runs after the unpack that is retriggered for package 'mariadb-server' when
++# the old 'mariadb-server-10.6' is purged, so we need to repeat the same check
++# here without any expectation for '$2'. This ensures that upgrades from
++# mariadb-server-x.y to mariadb-server (without version suffix) ends up with the
++# executable bit set on /etc/init.d/mariadb.
++if [ "$1" = "install" ] && [ -e "/etc/init.d/mariadb" ]
++then
++ chmod +x "/etc/init.d/mariadb" >/dev/null || true
++fi
--- /dev/null
- #flag:translate!:3,5
+# These templates have been reviewed by the debian-l10n-english
+# team
+#
+# If modifications/additions/rewording are needed, please ask
+# for an advice to debian-l10n-english@lists.debian.org
+#
+# Even minor modifications require translation updates and such
+# changes should be coordinated with translators and reviewers.
+
+Template: mariadb-server/old_data_directory_saved
+Type: note
+_Description: The old data directory will be saved at new location
+ A file named /var/lib/mysql/debian-*.flag exists on this system.
+ The number indicates a database binary format version that cannot automatically
+ be upgraded (or downgraded).
+ .
+ Therefore the previous data directory will be renamed to /var/lib/mysql-* and
+ a new data directory will be initialized at /var/lib/mysql.
+ .
+ Please manually export/import your data (e.g. with mysqldump) if needed.
+
+Template: mariadb-server/nis_warning
+Type: note
- Using MariaDB under NIS/YP requires a mysql user account to be added on
- the local system with:
++#flag:translate!:5
+_Description: Important note for NIS/YP users
- adduser --system --group --home /var/lib/mysql mysql
++ Local system accounts are created by systemd-sysusers which edits the
++ /etc/passwd and /etc/group files directly, without using NIS/LDAP.
+ .
- You should also check the permissions and ownership of the
- /var/lib/mysql directory:
++ On NIS/YP setups this package may create a local 'mysql' user/group during
++ installation/upgrade. Please verify your nsswitch.conf setup and ensure this
++ matches your local policy.
+ .
-
- Template: mariadb-server/feedback_optin
- Type: boolean
- Default: false
- _Description: Enable the Feedback plugin and submit anonymous usage information?
- Feedback plugin collects basic anonymous statistical information that can be
- used by the developers to improve MariaDB. This is an easy way to help with
- MariaDB development. Collected statistics can be viewed at
- http://mariadb.org/feedback-plugin
++ You should also check the permissions and ownership of /var/lib/mysql:
+ .
+ /var/lib/mysql: drwxr-xr-x mysql mysql
+
+Template: mariadb-server/postrm_remove_databases
+Type: boolean
+Default: false
+_Description: Remove all MariaDB databases?
+ The /var/lib/mysql directory which contains the MariaDB databases is about
+ to be removed.
+ .
+ If you're removing the MariaDB package in order to later install a more
+ recent version or if a different mariadb-server package is already
+ using it, the data should be kept.
--- /dev/null
++debian/unstable-tests.* usr/share/mariadb/mariadb-test/
+usr/share/mariadb/mariadb-test/collections
+usr/share/mariadb/mariadb-test/include
+usr/share/mariadb/mariadb-test/main
+usr/share/mariadb/mariadb-test/plugin
+usr/share/mariadb/mariadb-test/std_data
+usr/share/mariadb/mariadb-test/suite
--- /dev/null
- # Mainly for support for *BSD family. Not right way to do but this is test package and not for production
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/share/mariadb/mariadb-test/std_data/checkDBI_DBD-MariaDB.pl]
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/share/mariadb/mariadb-test/suite/engines/rr_trx/run_stress_tx_rr.pl]
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/share/mariadb/mariadb-test/suite/funcs_1/lib/DataGen_local.pl]
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/share/mariadb/mariadb-test/suite/funcs_1/lib/DataGen_modify.pl]
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/share/mariadb/mariadb-test/suite/funcs_2/lib/gen_charset_utf8.pl]
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/share/mariadb/mariadb-test/suite/rpl/extension/checksum.pl]
- # This is used to check if we are running under Bash
- bash-term-in-posix-shell '${BASH_VERSION' [usr/share/mysql/mariadb-test/std_data/wsrep_notify.sh:87]
- bash-term-in-posix-shell '${BASH_VERSION' [usr/share/mysql/mariadb-test/std_data/wsrep_notify_ssl.sh:87]
- # These files are result files and they are supposed to be
- # Natial encoded (ISO/IEC 8859-1) not UTF-8
- national-encoding [usr/share/mysql/mariadb-test/include/ctype_E05C.inc]
- national-encoding [usr/share/mysql/mariadb-test/main/alter_table.result]
- national-encoding [usr/share/mysql/mariadb-test/main/binary.result]
- national-encoding [usr/share/mysql/mariadb-test/main/binary.test]
- national-encoding [usr/share/mysql/mariadb-test/main/cast.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_big5.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_collate.result]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_collate.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_cp1250_ch.result]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_cp1250_ch.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_cp1251.result]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_cp1251.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_cp932_binlog_stm.result]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_filesystem-master.opt]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_gbk.result]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_latin1.result]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_latin1.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_latin1_de.result]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_latin1_de.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_many.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_ucs.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ctype_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ddl_i18n_koi8r.test]
- national-encoding [usr/share/mysql/mariadb-test/main/ddl_i18n_utf8.test]
- national-encoding [usr/share/mysql/mariadb-test/main/default.result]
- national-encoding [usr/share/mysql/mariadb-test/main/default.test]
- national-encoding [usr/share/mysql/mariadb-test/main/errors.result]
- national-encoding [usr/share/mysql/mariadb-test/main/errors.test]
- national-encoding [usr/share/mysql/mariadb-test/main/events_1.result]
- national-encoding [usr/share/mysql/mariadb-test/main/events_1.test]
- national-encoding [usr/share/mysql/mariadb-test/main/events_bugs.result]
- national-encoding [usr/share/mysql/mariadb-test/main/events_bugs.test]
- national-encoding [usr/share/mysql/mariadb-test/main/explain.result]
- national-encoding [usr/share/mysql/mariadb-test/main/explain.test]
- national-encoding [usr/share/mysql/mariadb-test/main/fulltext.test]
- national-encoding [usr/share/mysql/mariadb-test/main/fulltext_left_join.test]
- national-encoding [usr/share/mysql/mariadb-test/main/func_gconcat.result]
- national-encoding [usr/share/mysql/mariadb-test/main/func_gconcat.test]
- national-encoding [usr/share/mysql/mariadb-test/main/func_in.result]
- national-encoding [usr/share/mysql/mariadb-test/main/func_in.test]
- national-encoding [usr/share/mysql/mariadb-test/main/func_like.test]
- national-encoding [usr/share/mysql/mariadb-test/main/log_tables.test]
- national-encoding [usr/share/mysql/mariadb-test/main/long_unique_bugs.result]
- national-encoding [usr/share/mysql/mariadb-test/main/mysql_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/main/mysql_cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/main/mysqlbinlog.test]
- national-encoding [usr/share/mysql/mariadb-test/main/mysqldump.result]
- national-encoding [usr/share/mysql/mariadb-test/main/mysqltest.result]
- national-encoding [usr/share/mysql/mariadb-test/main/outfile_loaddata.result]
- national-encoding [usr/share/mysql/mariadb-test/main/rowid_order_innodb.result]
- national-encoding [usr/share/mysql/mariadb-test/main/show_check.test]
- national-encoding [usr/share/mysql/mariadb-test/main/show_explain.result]
- national-encoding [usr/share/mysql/mariadb-test/main/show_explain.test]
- national-encoding [usr/share/mysql/mariadb-test/main/show_explain_json.result]
- national-encoding [usr/share/mysql/mariadb-test/main/show_explain_json.test]
- national-encoding [usr/share/mysql/mariadb-test/main/sp.result]
- national-encoding [usr/share/mysql/mariadb-test/main/sp.test]
- national-encoding [usr/share/mysql/mariadb-test/main/warnings.result]
- national-encoding [usr/share/mysql/mariadb-test/main/warnings.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/connect/connect/r/bson.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/connect/connect/r/jdbc_postgresql.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/connect/connect/r/json.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/connect/connect/r/mysql.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/connect/connect/r/xml2_zip.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/connect/connect/r/xml_zip.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/cp1251.xml]
- national-encoding [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/latin1.xml]
- national-encoding [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/nocs.xml]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/r/alter_table_add_column_multibyte_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/r/alter_table_disable_keys_fulltext_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/r/alter_table_enable_keys_fulltext_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/r/column_multibyte_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/r/fulltext_charset_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/r/fulltext_charset_eucjpms.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/r/function_snippet_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/r/function_snippet_eucjpms.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/r/optimization_order_limit_optimized_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/t/alter_table_add_column_multibyte_cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/t/alter_table_disable_keys_fulltext_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/t/alter_table_enable_keys_fulltext_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/t/column_multibyte_cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/t/fulltext_charset_cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/t/fulltext_charset_eucjpms.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/t/function_snippet_cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/t/function_snippet_eucjpms.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/storage/t/optimization_order_limit_optimized_cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/wrapper/r/alter_table_add_column_multibyte_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/wrapper/r/column_multibyte_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/wrapper/r/fulltext_charset_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/wrapper/r/fulltext_charset_eucjpms.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/wrapper/t/alter_table_add_column_multibyte_cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/wrapper/t/column_multibyte_cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/wrapper/t/fulltext_charset_cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/wrapper/t/fulltext_charset_eucjpms.test]
- national-encoding [usr/share/mysql/mariadb-test/plugin/spider/spider/bugfix/r/cp932_column.result]
- national-encoding [usr/share/mysql/mariadb-test/plugin/spider/spider/bugfix/t/cp932_column.test]
- national-encoding [usr/share/mysql/mariadb-test/std_data/loaddata/mdev-11079.txt]
- national-encoding [usr/share/mysql/mariadb-test/std_data/loaddata/mdev9823.ujis.txt]
- national-encoding [usr/share/mysql/mariadb-test/std_data/loaddata/mdev9823.utf8mb4.txt]
- national-encoding [usr/share/mysql/mariadb-test/std_data/mariadb-conv/file02.latin1.txt]
- national-encoding [usr/share/mysql/mariadb-test/suite/binlog/include/binlog_mysqlbinlog-cp932.inc]
- national-encoding [usr/share/mysql/mariadb-test/suite/binlog/include/ctype_cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/binlog/r/binlog_mysqlbinlog_row.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/binlog/r/binlog_row_ctype_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/binlog/r/binlog_stm_ctype_cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/binlog/r/binlog_table_map_optional_metadata.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/binlog/r/binlog_table_map_optional_metadata_binary.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/binlog/r/binlog_table_map_optional_metadata_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/binlog/r/binlog_table_map_optional_metadata_utf32.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/client/mariadb-conv-cp932.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/client/mariadb-conv-cp932.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/innodb_fts/r/fulltext.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/innodb_fts/t/fulltext.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/innodb_fts/t/fulltext_left_join.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/include/trim_sjis.inc]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_alter_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_alter_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_alter_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_charlength_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_charlength_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_charlength_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_charset_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_charset_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_charset_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_convert_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_convert_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_create_db_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_create_db_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_create_db_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_create_tbl_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_create_tbl_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_create_tbl_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_enum_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_enum_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_enum_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_insert_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_insert_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_insert_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_instr_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_instr_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_instr_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_join_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_join_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_join_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_left_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_left_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_left_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_length_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_length_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_length_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_like_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_like_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_like_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_locate_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_locate_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_locate_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_lpad_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_lpad_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_lpad_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_ltrim_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_ltrim_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_ltrim_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_ps_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_ps_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_replace_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_replace_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_replace_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_reverse_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_reverse_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_reverse_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_right_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_right_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_right_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_rpad_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_rpad_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_rpad_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_rtrim_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_rtrim_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_rtrim_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_select_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_select_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_subquery_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_subquery_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_subquery_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_substring_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_substring_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_substring_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_trim_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_trim_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_trim_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_union_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_update_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_update_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_update_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_where_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_where_ucs2.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/r/jp_where_ujis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/std_data/jisx0201_sjis.dat]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/std_data/jisx0201_ucs2.dat]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/std_data/jisx0201_ujis.dat]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/std_data/jisx0208_sjis2.dat]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/std_data/jisx0208_sjis3.dat]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/std_data/jisx0208_ucs2.dat]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/std_data/jisx0208_ujis.dat]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/std_data/jisx0212_ucs2.dat]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/std_data/jisx0212_ujis.dat]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_alter_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_alter_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_alter_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_charlength_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_charlength_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_charlength_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_charset_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_charset_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_charset_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_convert_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_convert_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_convert_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_create_db_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_create_db_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_create_db_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_create_tbl_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_create_tbl_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_create_tbl_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_enum_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_enum_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_enum_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_insert_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_insert_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_insert_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_instr_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_instr_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_instr_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_join_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_join_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_join_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_left_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_left_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_left_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_length_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_length_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_length_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_like_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_like_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_like_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_locate_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_locate_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_locate_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_lpad_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_lpad_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_lpad_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_ltrim_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_ltrim_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_ltrim_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_ps_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_ps_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_replace_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_replace_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_replace_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_reverse_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_reverse_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_reverse_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_right_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_right_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_right_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_rpad_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_rpad_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_rpad_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_rtrim_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_rtrim_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_rtrim_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_select_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_select_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_select_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_subquery_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_subquery_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_subquery_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_substring_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_substring_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_substring_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_trim_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_trim_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_union_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_update_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_update_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_update_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_where_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_where_ucs2.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/jp/t/jp_where_ujis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/json/r/json_no_table.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/perfschema/t/statement_digest_charset.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/include/rpl_charset.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/include/rpl_row_annotate.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/r/rpl_charset.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/r/rpl_charset_sjis.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/r/rpl_parallel_charset.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/r/rpl_row_annotate_do.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/r/rpl_row_annotate_dont.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/r/rpl_set_charset.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/t/rpl_charset_sjis.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/t/rpl_parallel_charset.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/t/rpl_row_mysqlbinlog.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/t/rpl_set_charset.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/rpl/t/rpl_temporary.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/character_set_client_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/character_set_connection_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/character_set_results_func.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/collation_connection_func.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/collation_database_func.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/collation_server_func.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/foreign_key_checks_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/innodb_table_locks_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/max_seeks_for_key_func.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/pseudo_slave_mode_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/query_cache_wlock_invalidate_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/sql_big_selects_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/sql_buffer_result_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/sql_log_bin_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/sql_log_off_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/sql_low_priority_updates_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/sql_notes_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/sql_quote_show_create_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/sql_safe_updates_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/r/sql_warnings_basic.result]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/character_set_connection_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/character_set_results_func.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/collation_connection_func.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/collation_database_func.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/collation_server_func.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/foreign_key_checks_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/innodb_table_locks_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/max_seeks_for_key_func.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/pseudo_slave_mode_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/query_cache_wlock_invalidate_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/sql_big_selects_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/sql_buffer_result_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/sql_log_bin_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/sql_log_off_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/sql_notes_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/sql_quote_show_create_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/sql_safe_updates_basic.test]
- national-encoding [usr/share/mysql/mariadb-test/suite/sys_vars/t/sql_warnings_basic.test]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/collections/README]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/collections/skip_list_ubsan.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/boys.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/boyswin.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/coffee.htm]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/emp.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/expenses.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/funny.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/funny2.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/connect/connect/std_data/girls.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/example/README]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/heap/mtr2/README]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/plugin/myisam/mtr2/README]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/bad2_master.info]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/bad3_master.info]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/bad4_master.info]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/bad5_master.info]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/bad6_master.info]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/bad_master.info]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/bug30435_10k_items.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/bug30435_5k.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/bug887051.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/charset_utf8.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/innodb_tb1.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/innodb_tb2.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/innodb_tb3.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/innodb_tb4.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/load_file.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/memory_tb1.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/memory_tb2.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/memory_tb3.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/memory_tb4.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/myisam_tb1.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/myisam_tb2.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/myisam_tb3.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/myisam_tb4.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/t3.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/t4.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/t7.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/funcs_1/t9.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/keys.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/keys2.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/keys3.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/loaddata/mdev-11079.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/loaddata/mdev-11343.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/loaddata/mdev-11631.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/loaddata/mdev-15497.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/loaddata/mdev8711.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/loaddata/mdev9823.ujis.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/loaddata/mdev9823.utf8mb4.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/loaddata/mdev9824.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/loaddata/mdev9842.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/loaddata/nl.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/logkey.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/mariadb-conv/file01.utf16.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/mariadb-conv/file01.utf8.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/mariadb-conv/file02.latin1.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/mysql5613mysql/README]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/new-format-relay-log-win.info]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/new-format-relay-log.info]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/numbers.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/old-format-relay-log-win.info]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/old-format-relay-log.info]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/unicode/allkeys1400.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/unicode/allkeys400.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/unicode/allkeys520.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/std_data/wl5766_data.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/atomic/README.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/compat/README.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/engines/README]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/engines/iuds/t/hindi.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/engines/iuds/t/sample.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/engines/rr_trx/init_innodb.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/engines/rr_trx/run.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/funcs_1/README.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/funcs_2/data/charset_utf8.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/funcs_2/readme.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/large_tests/README.TXT]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/optimizer_unfixed_bugs/README.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/perfschema_stress/README]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/perfschema_stress/stress_init.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/perfschema_stress/stress_tests.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/rpl/README]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/rpl/r/rpl_critical_errors.result.txt]
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/suite/wsrep/README]
-
- # These are here for testing purposes
- repeated-path-segment auth_gssapi [usr/share/mysql/mariadb-test/plugin/auth_gssapi/auth_gssapi/]
- repeated-path-segment connect [usr/share/mysql/mariadb-test/plugin/connect/connect/]
- repeated-path-segment disks [usr/share/mysql/mariadb-test/plugin/disks/disks/]
- repeated-path-segment func_test [usr/share/mysql/mariadb-test/plugin/func_test/func_test/]
- repeated-path-segment metadata_lock_info [usr/share/mysql/mariadb-test/plugin/metadata_lock_info/metadata_lock_info/]
- repeated-path-segment mroonga [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/]
- repeated-path-segment mroonga [usr/share/mysql/mariadb-test/plugin/mroonga/mroonga/include/mroonga/]
- repeated-path-segment oqgraph [usr/share/mysql/mariadb-test/plugin/oqgraph/oqgraph/]
- repeated-path-segment query_response_time [usr/share/mysql/mariadb-test/plugin/query_response_time/query_response_time/]
- repeated-path-segment rocksdb [usr/share/mysql/mariadb-test/plugin/rocksdb/rocksdb/]
- repeated-path-segment sequence [usr/share/mysql/mariadb-test/plugin/sequence/sequence/]
- repeated-path-segment sphinx [usr/share/mysql/mariadb-test/plugin/sphinx/sphinx/]
- repeated-path-segment spider [usr/share/mysql/mariadb-test/plugin/spider/spider/]
- repeated-path-segment type_inet [usr/share/mysql/mariadb-test/plugin/type_inet/type_inet/]
- repeated-path-segment type_mysql_timestamp [usr/share/mysql/mariadb-test/plugin/type_mysql_timestamp/type_mysql_timestamp/]
- repeated-path-segment type_test [usr/share/mysql/mariadb-test/plugin/type_test/type_test/]
- repeated-path-segment type_uuid [usr/share/mysql/mariadb-test/plugin/type_uuid/type_uuid/]
- repeated-path-segment user_variables [usr/share/mysql/mariadb-test/plugin/user_variables/user_variables/]
- repeated-path-segment wsrep_info [usr/share/mysql/mariadb-test/plugin/wsrep_info/wsrep_info/]
++# Intentional for test files
++national-encoding [usr/share/mariadb/mariadb-test/*]
++# Extra test documentation files that really need to be kept in context in test directory
++package-contains-documentation-outside-usr-share-doc [usr/share/mariadb/mariadb-test/*]
++# Intentional directory structure
++repeated-path-segment auth_gssapi [usr/share/mariadb/mariadb-test/plugin/auth_gssapi/auth_gssapi/]
++repeated-path-segment connect [usr/share/mariadb/mariadb-test/plugin/connect/connect/]
++repeated-path-segment disks [usr/share/mariadb/mariadb-test/plugin/disks/disks/]
++repeated-path-segment func_test [usr/share/mariadb/mariadb-test/plugin/func_test/func_test/]
++repeated-path-segment metadata_lock_info [usr/share/mariadb/mariadb-test/plugin/metadata_lock_info/metadata_lock_info/]
++repeated-path-segment mroonga [usr/share/mariadb/mariadb-test/plugin/mroonga/mroonga/]
++repeated-path-segment mroonga [usr/share/mariadb/mariadb-test/plugin/mroonga/mroonga/include/mroonga/]
++repeated-path-segment oqgraph [usr/share/mariadb/mariadb-test/plugin/oqgraph/oqgraph/]
++repeated-path-segment query_response_time [usr/share/mariadb/mariadb-test/plugin/query_response_time/query_response_time/]
++repeated-path-segment rocksdb [usr/share/mariadb/mariadb-test/plugin/rocksdb/rocksdb/]
++repeated-path-segment sequence [usr/share/mariadb/mariadb-test/plugin/sequence/sequence/]
++repeated-path-segment sphinx [usr/share/mariadb/mariadb-test/plugin/sphinx/sphinx/]
++repeated-path-segment spider [usr/share/mariadb/mariadb-test/plugin/spider/spider/]
++repeated-path-segment type_inet [usr/share/mariadb/mariadb-test/plugin/type_inet/type_inet/]
++repeated-path-segment type_mysql_timestamp [usr/share/mariadb/mariadb-test/plugin/type_mysql_timestamp/type_mysql_timestamp/]
++repeated-path-segment type_test [usr/share/mariadb/mariadb-test/plugin/type_test/type_test/]
++repeated-path-segment type_uuid [usr/share/mariadb/mariadb-test/plugin/type_uuid/type_uuid/]
++repeated-path-segment user_variables [usr/share/mariadb/mariadb-test/plugin/user_variables/user_variables/]
++repeated-path-segment wsrep_info [usr/share/mariadb/mariadb-test/plugin/wsrep_info/wsrep_info/]
--- /dev/null
- # Mainly for support for *BSD family. Not right way to do but this is test package and not for production
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/share/mysql/mariadb-test/lib/process-purecov-annotations.pl]
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/share/mysql/mariadb-test/lib/v1/mysql-test-run.pl]
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/share/mysql/mariadb-test/mariadb-stress-test.pl]
- incorrect-path-for-interpreter /usr/bin/env perl != /usr/bin/perl [usr/share/mysql/mariadb-test/mariadb-test-run.pl]
-
- # These libraries are ok not have any other dependencies than itself and MariaDB server
+# These should be moved, see https://jira.mariadb.org/browse/MDEV-21653
+arch-dependent-file-in-usr-share [usr/share/mariadb/mariadb-test/lib/My/SafeProcess/my_safe_process]
+arch-dependent-file-in-usr-share [usr/share/mariadb/mariadb-test/lib/My/SafeProcess/wsrep_check_version]
-
- # These are from stop word list
- spelling-error-in-binary noone no one [usr/bin/mariadb-client-test-embedded]
- spelling-error-in-binary noone no one [usr/bin/mariadb-test-embedded]
- spelling-error-in-binary thats that's [usr/bin/mariadb-client-test-embedded]
- spelling-error-in-binary thats that's [usr/bin/mariadb-test-embedded]
- spelling-error-in-binary theres there's [usr/bin/mariadb-client-test-embedded]
- spelling-error-in-binary theres there's [usr/bin/mariadb-test-embedded]
- spelling-error-in-binary userA users [usr/lib/mysql/plugin/qa_auth_interface.so]
- spelling-error-in-binary yuR your [usr/bin/mariadb-client-test-embedded]
- spelling-error-in-binary yuR your [usr/bin/mariadb-test-embedded]
-
- # Location for this is usr/share/mysql/mariadb-test/mysql-test-run
- # so it's not missing it just in unusual location
++# MyISAM stopwords that cannot be changed and spelling errors remain
++spelling-error-in-binary noone no one [usr/bin/*]
++spelling-error-in-binary thats that's [usr/bin/*]
++spelling-error-in-binary theres there's [usr/bin/*]
++spelling-error-in-binary yuR your [usr/bin/mariadb-client-test-embedded]
++spelling-error-in-binary yuR your [usr/bin/mariadb-test-embedded]
++spelling-error-in-binary yuR your [usr/bin/test-connect-t]
++# False positives from Lintian that finds many short supposedly misspelled words
++# in binaries which don't actually exist in the source code anywhere
++spelling-error-in-binary freeE free [usr/bin/mariadb-client-test-embedded]
++spelling-error-in-binary freeE free [usr/bin/mariadb-test-embedded]
++spelling-error-in-binary freeE free [usr/bin/test-connect-t]
++spelling-error-in-binary IiF If [usr/bin/mariadb-client-test-embedded]
++spelling-error-in-binary IiF If [usr/bin/mariadb-test-embedded]
++spelling-error-in-binary IiF If [usr/bin/test-connect-t]
++# Valid reason for documentation in context in directory
++package-contains-documentation-outside-usr-share-doc [usr/share/mariadb/mariadb-test/README*]
++# Test plugins intentionally not fully featured
+shared-library-lacks-prerequisites [usr/lib/mysql/plugin/auth_0x0100.so]
+shared-library-lacks-prerequisites [usr/lib/mysql/plugin/debug_key_management.so]
+shared-library-lacks-prerequisites [usr/lib/mysql/plugin/test_sql_service.so]
-
- # README non common place but good to be there
- package-contains-documentation-outside-usr-share-doc [usr/share/mysql/mariadb-test/README]
++# The file mysql-test-run.pl is a symlink for mariadb-test-run.pl, which does
++# not have a man page, so the man page is indeed used and not a spare one
+spare-manual-page [usr/share/man/man1/mysql-test-run.pl.1.gz]
++# Text script, should be moved to another path
++no-manual-page [usr/bin/test-connect-t]
--- /dev/null
- lib/systemd/system/mariadb-extra.socket # Installed by rules file
- lib/systemd/system/mariadb.socket # Installed by rules file
+etc/columnstore/storagemanager.cnf.example # Copy of etc/columnstore/storagemanager.cnf that is installed
++etc/logrotate.d/mysql # Debian packaging uses mariadb-server.mysql-server.logrotate
+etc/my.cnf # Debian packaging has /etc/mysql/my.cnf, which is a symlink to mariadb.cnf
+etc/mysql/mariadb.conf.d/client.cnf # Debian packaging uses files from debian/additions/mariadb.cnf.d/
+etc/mysql/mariadb.conf.d/enable_encryption.preset # Debian packaging uses files from debian/additions/mariadb.cnf.d/
+etc/mysql/mariadb.conf.d/mysql-clients.cnf # Debian packaging uses files from debian/additions/mariadb.cnf.d/
+etc/mysql/mariadb.conf.d/server.cnf # Debian packaging uses files from debian/additions/mariadb.cnf.d/
- usr/lib/*/libdbbc.a # ColumnStore static library
- usr/lib/*/libidbboot.a # ColumnStore static library
- usr/lib/*/libprocessor.a # ColumnStore static library
- usr/lib/*/libwe_xml.a # ColumnStore static library
- usr/lib/*/libdbbc.a # ColumnStore static library
- usr/lib/*/libidbboot.a # ColumnStore static library
- usr/lib/*/libprocessor.a # ColumnStore static library
- usr/lib/*/libwe_xml.a # ColumnStore static library
- usr/lib/*/pkgconfig/mariadb.pc
- usr/bin/uca-dump
- usr/bin/wsrep_sst_backup
- usr/lib/sysusers.d/mariadb.conf # Not used (yet) in Debian systemd
+usr/bin/mariadb-embedded # Shipping the embedded server in distro packaging does not make sense
+usr/bin/mysql_config # Debian packaging has mysql_config as symlink to mariadb_config
+usr/bin/mysql_embedded # Symlink to mariadb-embedded which is intentionally not included
+usr/bin/sst_dump # Use the one from rocksdb-tools package
- usr/share/doc/mariadb-server/README.md
++usr/lib/*/libdbbc.a # ColumnStore header file
++usr/lib/*/libidbboot.a # ColumnStore header file
++usr/lib/*/libprocessor.a # ColumnStore header file
++usr/lib/*/libwe_xml.a # ColumnStore header file
+usr/sbin/rcmysql
+usr/share/doc/mariadb-server/COPYING (related file: "debian/tmp/usr/share/mariadb/mroonga/COPYING")
+usr/share/doc/mariadb-server/CREDITS
+usr/share/doc/mariadb-server/INSTALL-BINARY
- usr/share/groonga/COPYING
+usr/share/doc/mariadb-server/README-wsrep
++usr/share/doc/mariadb-server/README.md
+usr/share/doc/mariadb-server/THIRDPARTY
- usr/share/man/man1/mysql.server.1
+usr/share/groonga-normalizer-mysql/lgpl-2.0.txt
+usr/share/groonga-normalizer-mysql/README.md
++usr/share/groonga/COPYING
+usr/share/groonga/README.md
+usr/share/man/man1/mariadb-embedded.1 # Shipping the embedded server in distro packaging does not make sense
+usr/share/man/man1/my_safe_process.1
+usr/share/man/man1/mysql_embedded.1 # Symlink to mariadb-embedded.1 which is intentionally not included
- usr/share/mariadb/mariadb.logrotate
+usr/share/man/man1/mysql-stress-test.pl.1
++usr/share/man/man1/mysql-test-run.pl.1 # Spare manual page, should be deleted upstream
++usr/share/man/man1/mysql.server.1
+usr/share/mariadb/binary-configure
++usr/share/mariadb/JavaWrappers.jar # These are only built if JNI/libjawt.so is installed from e.g. openjdk-8-jre-headless
++usr/share/mariadb/JdbcInterface.jar # These are only built if JNI/libjawt.so is installed from e.g. openjdk-8-jre-headless
+usr/share/mariadb/magic
+usr/share/mariadb/maria_add_gis_sp.sql # mariadb-server-core.install has *_bootstrap.sql
- usr/share/mariadb/mariadb-test/unstable-tests
+usr/share/mariadb/mariadb-test/asan.supp
+usr/share/mariadb/mariadb-test/lsan.supp
- usr/share/mariadb/mysqld_multi.server
++usr/share/mariadb/mariadb.logrotate
+usr/share/mariadb/Mongo2.jar
+usr/share/mariadb/Mongo3.jar
- usr/share/mariadb/policy/apparmor/README # In MariaDB we don't want to use AppArmor at the moment
- usr/share/mariadb/policy/apparmor/usr.sbin.mysqld # In MariaDB we don't want to use AppArmor at the moment
- usr/share/mariadb/policy/apparmor/usr.sbin.mysqld.local # In MariaDB we don't want to use AppArmor at the moment
+usr/share/mariadb/mysql.server # Debian packaging uses mariadb-server.mariadb.init
- usr/share/mariadb/systemd/mysqld.service # Installed by rules file
++usr/share/mariadb/mysqld_multi.server
++usr/share/mariadb/policy/apparmor/README # Use Debian-specific AppArmor instead of upstream's
++usr/share/mariadb/policy/apparmor/usr.sbin.mysqld # Use Debian-specific AppArmor instead of upstream's
++usr/share/mariadb/policy/apparmor/usr.sbin.mysqld.local # Use Debian-specific AppArmor instead of upstream's
+usr/share/mariadb/policy/selinux/mariadb-server.fc # In MariaDB we don't want to use SELinux at the moment
+usr/share/mariadb/policy/selinux/mariadb-server.te # In MariaDB we don't want to use SELinux at the moment
+usr/share/mariadb/policy/selinux/mariadb.te # In MariaDB we don't want to use SELinux at the moment
+usr/share/mariadb/policy/selinux/README # In MariaDB we don't want to use SELinux at the moment
+usr/share/mariadb/systemd/mariadb-extra@.socket # Installed by rules file
+usr/share/mariadb/systemd/mariadb.service # Installed by rules file
+usr/share/mariadb/systemd/mariadb@.service # Installed by rules file
+usr/share/mariadb/systemd/mariadb@.socket # Installed by rules file
- usr/share/man/man1/wsrep_sst_backup.1
+usr/share/mariadb/systemd/mysql.service # Installed by rules file
++usr/share/mariadb/systemd/mysqld.service # Installed by rules file
+usr/share/mariadb/systemd/use_galera_new_cluster.conf
--- /dev/null
--- /dev/null
++From: Otto Kekalainen <otto@debian.org>
++Date: Sun, 10 Mar 2024 16:56:13 +0000
++Subject: Fix misc spelling in MariaDB Server repository
++
++This is a combined patch of various spelling fixes.
++
++* Fix misc typos in MariaDB Server
++
++* Fix spelling of 'allows one to'
++
++ Fix the following Lintian nags introduced in commit
++ c8d040938a7ebe10e62506a726702c5990ef4dda:
++
++ I: mariadb-backup: spelling-error-in-binary "allows to" "allows one to" [usr/bin/mariadb-backup]
++ I: mariadb-server-core: spelling-error-in-binary "allows to" "allows one to" [usr/sbin/mariadbd]
++ I: mariadb-test: spelling-error-in-binary "allows to" "allows one to" [usr/bin/mariadb-client-test-embedded]
++ I: mariadb-test: spelling-error-in-binary "allows to" "allows one to" [usr/bin/mariadb-test-embedded]
++ I: mariadb-test: spelling-error-in-binary "allows to" "allows one to" [usr/bin/test-connect-t]
++
++* Fix typo: Enrypt->Encrypt
++
++Merged in https://github.com/MariaDB/server/commit/5879c85f505d3a11d4b8f479f2437416d8a1d724
++and thus included in MariaDB 12.3 onward.
++
++Forwarded: https://github.com/MariaDB/server/pull/4458
++---
++ extra/mariabackup/innobackupex.cc | 4 ++--
++ extra/mariabackup/xtrabackup.cc | 6 +++---
++ mysql-test/main/mysqld--help.result | 15 ++++++++-------
++ mysql-test/suite/sys_vars/r/sysvars_innodb.result | 2 +-
++ .../suite/sys_vars/r/sysvars_server_embedded.result | 2 +-
++ .../suite/sys_vars/r/sysvars_server_notembedded.result | 2 +-
++ sql/opt_subselect.cc | 4 ++--
++ sql/sql_select.cc | 4 ++--
++ sql/sys_vars.cc | 2 +-
++ storage/connect/odbconn.cpp | 2 +-
++ storage/innobase/handler/ha_innodb.cc | 2 +-
++ support-files/mysql.server.sh | 2 +-
++ 12 files changed, 24 insertions(+), 23 deletions(-)
++
++diff --git a/extra/mariabackup/innobackupex.cc b/extra/mariabackup/innobackupex.cc
++index 22f4dc3..1c0bc11 100644
++--- a/extra/mariabackup/innobackupex.cc
+++++ b/extra/mariabackup/innobackupex.cc
++@@ -188,7 +188,7 @@ enum innobackupex_options
++ OPT_DATABASES,
++ OPT_DECOMPRESS,
++
++- /* options wich are passed directly to xtrabackup */
+++ /* options which are passed directly to xtrabackup */
++ OPT_CLOSE_FILES,
++ OPT_COMPACT,
++ OPT_COMPRESS,
++@@ -447,7 +447,7 @@ static struct my_option ibx_long_options[] =
++ {"startup-wait-timeout", OPT_LOCK_WAIT_TIMEOUT,
++ "This option specifies time in seconds that mariadb-backup should wait for "
++ "BACKUP STAGE START to complete. BACKUP STAGE START has to wait until all "
++- "currently running queries using explicite LOCK TABLES has ended. "
+++ "currently running queries using explicit LOCK TABLES has ended. "
++ "If there are still such queries when the timeout expires, mariadb-backup "
++ "terminates with an error. Default is 0, in which case mariadb-backup waits "
++ "indefinitely for BACKUP STAGE START to finish",
++diff --git a/extra/mariabackup/xtrabackup.cc b/extra/mariabackup/xtrabackup.cc
++index effbac0..377082a 100644
++--- a/extra/mariabackup/xtrabackup.cc
+++++ b/extra/mariabackup/xtrabackup.cc
++@@ -220,7 +220,7 @@ uint xtrabackup_compress = FALSE;
++ uint xtrabackup_compress_threads;
++ ulonglong xtrabackup_compress_chunk_size = 0;
++
++-/* sleep interval beetween log copy iterations in log copying thread
+++/* sleep interval between log copy iterations in log copying thread
++ in milliseconds (default is 1 second) */
++ ulint xtrabackup_log_copy_interval = 1000;
++ static ulong max_buf_pool_modified_pct;
++@@ -1808,7 +1808,7 @@ struct my_option xb_client_options[]= {
++ {"startup-wait-timeout", OPT_LOCK_WAIT_TIMEOUT,
++ "This option specifies time in seconds that mariadb-backup should wait for "
++ "BACKUP STAGE START to complete. BACKUP STAGE START has to wait until all "
++- "currently running queries using explicite LOCK TABLES has ended. "
+++ "currently running queries using explicit LOCK TABLES has ended. "
++ "If there are still such queries when the timeout expires, mariadb-backup "
++ "terminates with an error. Default is 0, in which case mariadb-backup waits "
++ "indefinitely for BACKUP STAGE START to finish",
++@@ -5852,7 +5852,7 @@ void CorruptedPages::backup_fix_ddl(ds_ctxt *ds_data, ds_ctxt *ds_meta)
++ }
++
++ /* Mariabackup doesn't detect any FILE_OP for the deferred
++- tablespace. There is a possiblity that page0 could've
+++ tablespace. There is a possibility that page0 could've
++ been corrupted persistently in the disk */
++ for (auto space_name: defer_space_names) {
++ if (!check_if_skip_table(space_name.c_str())) {
++diff --git a/mysql-test/main/mysqld--help.result b/mysql-test/main/mysqld--help.result
++index 44a92c2..4422900 100644
++--- a/mysql-test/main/mysqld--help.result
+++++ b/mysql-test/main/mysqld--help.result
++@@ -826,13 +826,14 @@ The following specify which files/extra groups are read (specified before remain
++ storage as part of an index scan
++ --optimizer-join-limit-pref-ratio=#
++ For queries with JOIN and ORDER BY LIMIT : make the
++- optimizer consider a join order that allows to short-cut
++- execution after producing #LIMIT matches if that promises
++- N times speedup. (A conservative setting here would be is
++- a high value, like 100 so the short-cutting plan is used
++- if it promises a speedup of 100x or more). Short-cutting
++- plans are inherently risky so the default is 0 which
++- means do not consider this optimization
+++ optimizer consider a join order that allows one to
+++ short-cut execution after producing #LIMIT matches if
+++ that promises N times speedup. (A conservative setting
+++ here would be is a high value, like 100 so the
+++ short-cutting plan is used if it promises a speedup of
+++ 100x or more). Short-cutting plans are inherently risky
+++ so the default is 0 which means do not consider this
+++ optimization
++ --optimizer-key-compare-cost=#
++ Cost of checking a key against the end key condition
++ --optimizer-key-copy-cost=#
++diff --git a/mysql-test/suite/sys_vars/r/sysvars_innodb.result b/mysql-test/suite/sys_vars/r/sysvars_innodb.result
++index b9f1e8b..bf590a5 100644
++--- a/mysql-test/suite/sys_vars/r/sysvars_innodb.result
+++++ b/mysql-test/suite/sys_vars/r/sysvars_innodb.result
++@@ -565,7 +565,7 @@ SESSION_VALUE NULL
++ DEFAULT_VALUE OFF
++ VARIABLE_SCOPE GLOBAL
++ VARIABLE_TYPE BOOLEAN
++-VARIABLE_COMMENT Encrypt the temporary table data
+++VARIABLE_COMMENT Encrypt the temporary table data.
++ NUMERIC_MIN_VALUE NULL
++ NUMERIC_MAX_VALUE NULL
++ NUMERIC_BLOCK_SIZE NULL
++diff --git a/mysql-test/suite/sys_vars/r/sysvars_server_embedded.result b/mysql-test/suite/sys_vars/r/sysvars_server_embedded.result
++index f127a28..df7647d 100644
++--- a/mysql-test/suite/sys_vars/r/sysvars_server_embedded.result
+++++ b/mysql-test/suite/sys_vars/r/sysvars_server_embedded.result
++@@ -2505,7 +2505,7 @@ COMMAND_LINE_ARGUMENT REQUIRED
++ VARIABLE_NAME OPTIMIZER_JOIN_LIMIT_PREF_RATIO
++ VARIABLE_SCOPE SESSION
++ VARIABLE_TYPE BIGINT UNSIGNED
++-VARIABLE_COMMENT For queries with JOIN and ORDER BY LIMIT : make the optimizer consider a join order that allows to short-cut execution after producing #LIMIT matches if that promises N times speedup. (A conservative setting here would be is a high value, like 100 so the short-cutting plan is used if it promises a speedup of 100x or more). Short-cutting plans are inherently risky so the default is 0 which means do not consider this optimization
+++VARIABLE_COMMENT For queries with JOIN and ORDER BY LIMIT : make the optimizer consider a join order that allows one to short-cut execution after producing #LIMIT matches if that promises N times speedup. (A conservative setting here would be is a high value, like 100 so the short-cutting plan is used if it promises a speedup of 100x or more). Short-cutting plans are inherently risky so the default is 0 which means do not consider this optimization
++ NUMERIC_MIN_VALUE 0
++ NUMERIC_MAX_VALUE 4294967295
++ NUMERIC_BLOCK_SIZE 1
++diff --git a/mysql-test/suite/sys_vars/r/sysvars_server_notembedded.result b/mysql-test/suite/sys_vars/r/sysvars_server_notembedded.result
++index 9ead8d4..3b79975 100644
++--- a/mysql-test/suite/sys_vars/r/sysvars_server_notembedded.result
+++++ b/mysql-test/suite/sys_vars/r/sysvars_server_notembedded.result
++@@ -2715,7 +2715,7 @@ COMMAND_LINE_ARGUMENT REQUIRED
++ VARIABLE_NAME OPTIMIZER_JOIN_LIMIT_PREF_RATIO
++ VARIABLE_SCOPE SESSION
++ VARIABLE_TYPE BIGINT UNSIGNED
++-VARIABLE_COMMENT For queries with JOIN and ORDER BY LIMIT : make the optimizer consider a join order that allows to short-cut execution after producing #LIMIT matches if that promises N times speedup. (A conservative setting here would be is a high value, like 100 so the short-cutting plan is used if it promises a speedup of 100x or more). Short-cutting plans are inherently risky so the default is 0 which means do not consider this optimization
+++VARIABLE_COMMENT For queries with JOIN and ORDER BY LIMIT : make the optimizer consider a join order that allows one to short-cut execution after producing #LIMIT matches if that promises N times speedup. (A conservative setting here would be is a high value, like 100 so the short-cutting plan is used if it promises a speedup of 100x or more). Short-cutting plans are inherently risky so the default is 0 which means do not consider this optimization
++ NUMERIC_MIN_VALUE 0
++ NUMERIC_MAX_VALUE 4294967295
++ NUMERIC_BLOCK_SIZE 1
++diff --git a/sql/opt_subselect.cc b/sql/opt_subselect.cc
++index 0bf1998..4ebb368 100644
++--- a/sql/opt_subselect.cc
+++++ b/sql/opt_subselect.cc
++@@ -6894,7 +6894,7 @@ bool JOIN::choose_subquery_plan(table_map join_tables)
++ add("rows", inner_record_count_1).
++ add("materialization_cost", materialize_strategy_cost).
++ add("in_exist_cost", in_exists_strategy_cost).
++- add("choosen", strategy);
+++ add("chosen", strategy);
++ }
++
++ DBUG_PRINT("info",
++@@ -6932,7 +6932,7 @@ bool JOIN::choose_subquery_plan(table_map join_tables)
++ {
++ Json_writer_object trace_wrapper(thd);
++ Json_writer_object trace_subquery(thd, "subquery_plan_revert");
++- trace_subquery.add("choosen", "in_to_exists");
+++ trace_subquery.add("chosen", "in_to_exists");
++ }
++ }
++
++diff --git a/sql/sql_select.cc b/sql/sql_select.cc
++index fa73d52..1e697a5 100644
++--- a/sql/sql_select.cc
+++++ b/sql/sql_select.cc
++@@ -11831,7 +11831,7 @@ double recompute_join_cost_with_limit(const JOIN *join, bool skip_sorting,
++
++ /*
++ @brief
++- Finalize building the join order which allows to short-cut the join
+++ Finalize building the join order which allows one to short-cut the join
++ execution.
++
++ @detail
++@@ -15318,7 +15318,7 @@ void JOIN::drop_unused_derived_keys()
++ }
++ /*
++ We dropped all keys except the chosen one and unique keys.
++- The choosen one is stored as the first key (number 0).
+++ The chosen one is stored as the first key (number 0).
++ */
++ tab->ref.key= 0;
++ }
++diff --git a/sql/sys_vars.cc b/sql/sys_vars.cc
++index 3c2fee2..545821d 100644
++--- a/sql/sys_vars.cc
+++++ b/sql/sys_vars.cc
++@@ -2973,7 +2973,7 @@ static Sys_var_ulong Sys_optimizer_selectivity_sampling_limit(
++ static Sys_var_ulonglong Sys_optimizer_join_limit_pref_ratio(
++ "optimizer_join_limit_pref_ratio",
++ "For queries with JOIN and ORDER BY LIMIT : make the optimizer "
++- "consider a join order that allows to short-cut execution after "
+++ "consider a join order that allows one to short-cut execution after "
++ "producing #LIMIT matches if that promises N times speedup. "
++ "(A conservative setting here would be is a high value, like 100 so "
++ "the short-cutting plan is used if it promises a speedup of 100x or "
++diff --git a/storage/connect/odbconn.cpp b/storage/connect/odbconn.cpp
++index 520b82d..a782570 100644
++--- a/storage/connect/odbconn.cpp
+++++ b/storage/connect/odbconn.cpp
++@@ -281,7 +281,7 @@ static CATPARM *AllocCatInfo(PGLOBAL g, CATINFO fid, PCSZ db,
++ cap->Status = (UWORD *)PlugSubAlloc(g, NULL, m * sizeof(UWORD));
++
++ } catch (int n) {
++- htrc("Exeption %d: %s\n", n, g->Message);
+++ htrc("Exception %d: %s\n", n, g->Message);
++ cap = NULL;
++ } catch (const char *msg) {
++ htrc(g->Message, msg);
++diff --git a/storage/innobase/handler/ha_innodb.cc b/storage/innobase/handler/ha_innodb.cc
++index 21dbe9c..40b974a 100644
++--- a/storage/innobase/handler/ha_innodb.cc
+++++ b/storage/innobase/handler/ha_innodb.cc
++@@ -19866,7 +19866,7 @@ static MYSQL_SYSVAR_BOOL(immediate_scrub_data_uncompressed,
++
++ static MYSQL_SYSVAR_BOOL(encrypt_temporary_tables, innodb_encrypt_temporary_tables,
++ PLUGIN_VAR_OPCMDARG | PLUGIN_VAR_READONLY,
++- "Encrypt the temporary table data",
+++ "Encrypt the temporary table data.",
++ NULL, NULL, false);
++
++ static MYSQL_SYSVAR_BOOL(truncate_temporary_tablespace_now,
++diff --git a/support-files/mysql.server.sh b/support-files/mysql.server.sh
++index dd8cbd4..cc4b866 100644
++--- a/support-files/mysql.server.sh
+++++ b/support-files/mysql.server.sh
++@@ -194,7 +194,7 @@ su_kill() {
++
++ #
++ # Read defaults file from 'basedir'. If there is no defaults file there
++-# check if it's in the old (depricated) place (datadir) and read it from there
+++# check if it's in the old (deprecated) place (datadir) and read it from there
++ #
++
++ extra_args=""
--- /dev/null
--- /dev/null
++From: =?utf-8?b?T3R0byBLZWvDpGzDpGluZW4=?= <otto@debian.org>
++Date: Wed, 4 Jun 2025 14:46:31 +0300
++Subject: Improve output from mariadb-secure-installation to be more honest
++
++The script is not useful in Debian, and likely misleading to users.
++Improve the output to be more clear about what it is doing or is not
++doing.
++
++Merged on 'main' in
++https://github.com/MariaDB/server/commit/3a08a8e3d2212f3f60937b3fd97207c3ea7b933a
++and thus included in MariaDB 12.3 onward.
++
++Forwarded: https://github.com/MariaDB/server/pull/4457
++---
++ scripts/mysql_secure_installation.sh | 24 ++++++++++++++----------
++ 1 file changed, 14 insertions(+), 10 deletions(-)
++
++diff --git a/scripts/mysql_secure_installation.sh b/scripts/mysql_secure_installation.sh
++index 5883398..f9f020e 100755
++--- a/scripts/mysql_secure_installation.sh
+++++ b/scripts/mysql_secure_installation.sh
++@@ -338,7 +338,8 @@ set_root_password() {
++ remove_anonymous_users() {
++ do_query "DELETE FROM mysql.global_priv WHERE User='';"
++ if [ $? -eq 0 ]; then
++- echo " ... Success!"
+++ echo "SQL executed without errors!"
+++ echo "The operation might have been successful, or it might have not done anything."
++ else
++ echo " ... Failed!"
++ clean_and_exit
++@@ -350,7 +351,8 @@ remove_anonymous_users() {
++ remove_remote_root() {
++ do_query "DELETE FROM mysql.global_priv WHERE User='root' AND Host NOT IN ('localhost', '127.0.0.1', '::1');"
++ if [ $? -eq 0 ]; then
++- echo " ... Success!"
+++ echo "SQL executed without errors!"
+++ echo "The operation might have been successful, or it might have not done anything."
++ else
++ echo " ... Failed!"
++ fi
++@@ -360,7 +362,8 @@ remove_test_database() {
++ echo " - Dropping test database..."
++ do_query "DROP DATABASE IF EXISTS test;"
++ if [ $? -eq 0 ]; then
++- echo " ... Success!"
+++ echo "SQL executed without errors!"
+++ echo "The operation might have been successful, or it might have not done anything."
++ else
++ echo " ... Failed! Not critical, keep moving..."
++ fi
++@@ -368,7 +371,8 @@ remove_test_database() {
++ echo " - Removing privileges on test database..."
++ do_query "DELETE FROM mysql.db WHERE Db='test' OR Db='test\\_%'"
++ if [ $? -eq 0 ]; then
++- echo " ... Success!"
+++ echo "SQL executed without errors!"
+++ echo "The operation might have been successful, or it might have not done anything."
++ else
++ echo " ... Failed! Not critical, keep moving..."
++ fi
++@@ -413,12 +417,12 @@ prepare
++ set_echo_compat
++
++ echo
++-echo "NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB"
++-echo " SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!"
+++echo "NOTE: MariaDB is secure by default in Debian. Running this script is"
+++echo " useless at best, and misleading at worst. This script will be"
+++echo " removed in a future MariaDB release in Debian. Please read"
+++echo " /usr/share/doc/mariadb-server/README.Debian.gz for details."
++ echo
++-echo "In order to log into MariaDB to secure it, we'll need the current"
++-echo "password for the root user. If you've just installed MariaDB, and"
++-echo "haven't set the root password yet, you should just press enter here."
+++echo "Enter root user password or leave blank:"
++ echo
++
++ get_root_password
++@@ -450,7 +454,7 @@ else
++ emptypass=0
++ do_query "UPDATE mysql.global_priv SET priv=json_set(priv, '$.password_last_changed', UNIX_TIMESTAMP(), '$.plugin', 'mysql_native_password', '$.authentication_string', 'invalid', '$.auth_or', json_array(json_object(), json_object('plugin', 'unix_socket'))) WHERE User='root';"
++ if [ $? -eq 0 ]; then
++- echo "Enabled successfully!"
+++ echo "Enabled successfully (or at least no errors was emitted)!"
++ echo "Reloading privilege tables.."
++ reload_privilege_tables
++ if [ $? -eq 1 ]; then
--- /dev/null
--- /dev/null
++From: =?utf-8?b?T3R0byBLZWvDpGzDpGluZW4=?= <otto@debian.org>
++Date: Thu, 7 Aug 2025 21:30:51 -0700
++Subject: Suppress native AIO warning introduced in 10.8.3
++
++Upstream a87bb96 introduced a new warning, visible at least on all ppc64el and
++s390x builds which makes the post-build mariadb-test-test fail:
++
++ [Warning] InnoDB: native AIO failed: falling back to
++ innodb_use_native_aio=OFF
++
++The case of this is the ci environment only where there is insufficent
++fs.aio-max-nr configured. A such we are adding a suppression to the
++mtr only. The warning is valuable for users. Upstream MDEV-37411 has
++added a io_setup as a warning, which will fail in the CI environment,
++so we're pre-emptively suppressing this warning too.
++
++Unlike upstream MariaDB, in Debian we removed libaio in for Linux on
++MariaDB 10.6+ in 612630c6 and completely in 1d648d6f. This was re-added
++by upstream added a system variable innodb_linux_aio to control, and
++also provided automated fallback. As such we're readding it back too.
++
++With liburing still seccomp filterer in container environments having
++a libaio fallback is more valuable than the threads implementation of
++last resort.
++
++Edited & Updated: Daniel Black <daniel@mariabdb.org>
++
++Upstream rejected this with the conclusion, is that it will start working in
++Debian/Salsa/Ubuntu/Launchpad once the Linux kernel is new enough to handle the
++I/O calls and fallbacks properly, or once the CI system increases the value of
++/proc/sys/fs/aio-max-nr to 1 million or so, to allow multiple parallel MariaDB
++servers (as started by mariadb-test-run) each have enough quota for native AIO
++to work.
++
++Forwarded: https://jira.mariadb.org/browse/MDEV-37411 (rejected)
++---
++ mysql-test/mariadb-test-run.pl | 2 ++
++ 1 file changed, 2 insertions(+)
++
++diff --git a/mysql-test/mariadb-test-run.pl b/mysql-test/mariadb-test-run.pl
++index 6739995..8d88e4d 100755
++--- a/mysql-test/mariadb-test-run.pl
+++++ b/mysql-test/mariadb-test-run.pl
++@@ -4498,6 +4498,8 @@ sub extract_warning_lines ($$) {
++ qr/error .*connecting to master/,
++ qr/InnoDB: Dumping buffer pool.*/,
++ qr/InnoDB: Buffer pool.*/,
+++ qr/io_setup(%d) returned.*/,
+++ qr/InnoDB: native AIO failed: falling back to innodb_use_native_aio=OFF/,
++ qr/InnoDB: Could not free any blocks in the buffer pool!/,
++ qr/InnoDB: innodb_open_files .* should not be greater than/,
++ qr/InnoDB: Trying to delete tablespace.*but there are.*pending/,
--- /dev/null
--- /dev/null
++From: Sergei Golubchik <serg@mariadb.org>
++Date: Fri, 13 Feb 2026 15:22:57 +0100
++Subject: [PATCH] MDEV-38811 crash in information_schema.table_constraints
++ when --skip-grant-tables
++
++acl_get_all3() wasn't expecting --skip-grant-tables
++
++Multiple users reported Akonadi crashing with MariaDB 11.8.6. Downgrading to
++11.8.5 fixed it. Reason most likely due to upstream regression as described
++in detail in bug reports.
++
++Origin: https://github.com/MariaDB/server/commit/87309d3d4bb8f48910d05b0ca5ee989bcdd6b053.patch
++Bug: https://jira.mariadb.org/browse/MDEV-38811
++Forwarded: not-needed
++---
++ sql/sql_acl.cc | 3 +++
++ 1 file changed, 3 insertions(+)
++
++diff --git a/sql/sql_acl.cc b/sql/sql_acl.cc
++index a583c0b..b6abd27 100644
++--- a/sql/sql_acl.cc
+++++ b/sql/sql_acl.cc
++@@ -3927,6 +3927,9 @@ privilege_t acl_get(const char *host, const char *ip,
++ privilege_t acl_get_all3(Security_context *sctx, const char *db,
++ bool db_is_patern)
++ {
+++ if (!initialized)
+++ return DB_ACLS;
+++
++ privilege_t access= acl_get(sctx->host, sctx->ip,
++ sctx->priv_user, db, db_is_patern);
++ if (sctx->priv_role[0])
--- /dev/null
--- /dev/null
++From: Otto Kekalainen <otto@debian.org>
++Date: Sun, 20 Dec 2020 20:58:42 +0200
++Subject: Fix perl path in scripts
++
++Fix Lintian issue https://lintian.debian.org/tags/incorrect-path-for-interpreter.html
++
++Upstream will never accept this patch,
++see https://github.com/MariaDB/server/pull/1718
++
++Origin: https://patch-diff.githubusercontent.com/raw/MariaDB/server/pull/1718.patch
++Forwarded: https://github.com/MariaDB/server/pull/1718 (rejected, will never be merged)
++---
++ mysql-test/lib/process-purecov-annotations.pl | 2 +-
++ mysql-test/lib/v1/mysql-test-run.pl | 2 +-
++ mysql-test/mariadb-stress-test.pl | 2 +-
++ mysql-test/mariadb-test-run.pl | 2 +-
++ mysql-test/std_data/checkDBI_DBD-MariaDB.pl | 2 +-
++ mysql-test/suite/engines/rr_trx/run_stress_tx_rr.pl | 2 +-
++ mysql-test/suite/funcs_1/lib/DataGen_local.pl | 2 +-
++ mysql-test/suite/funcs_1/lib/DataGen_modify.pl | 2 +-
++ mysql-test/suite/funcs_2/lib/gen_charset_utf8.pl | 2 +-
++ mysql-test/suite/rpl/extension/checksum.pl | 2 +-
++ scripts/mytop.sh | 2 +-
++ 11 files changed, 11 insertions(+), 11 deletions(-)
++
++diff --git a/mysql-test/lib/process-purecov-annotations.pl b/mysql-test/lib/process-purecov-annotations.pl
++index 4381aae..d533bd0 100755
++--- a/mysql-test/lib/process-purecov-annotations.pl
+++++ b/mysql-test/lib/process-purecov-annotations.pl
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++ # -*- cperl -*-
++
++ # This script processes a .gcov coverage report to honor purecov
++diff --git a/mysql-test/lib/v1/mysql-test-run.pl b/mysql-test/lib/v1/mysql-test-run.pl
++index 268f71b..7225f68 100755
++--- a/mysql-test/lib/v1/mysql-test-run.pl
+++++ b/mysql-test/lib/v1/mysql-test-run.pl
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++ # -*- cperl -*-
++
++ # Copyright (c) 2008, 2013, Oracle and/or its affiliates. All rights reserved.
++diff --git a/mysql-test/mariadb-stress-test.pl b/mysql-test/mariadb-stress-test.pl
++index 3ccf965..ef7d974 100755
++--- a/mysql-test/mariadb-stress-test.pl
+++++ b/mysql-test/mariadb-stress-test.pl
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++
++ # Copyright (c) 2005, 2011, Oracle and/or its affiliates. All rights reserved.
++ #
++diff --git a/mysql-test/mariadb-test-run.pl b/mysql-test/mariadb-test-run.pl
++index bc9845b..6739995 100755
++--- a/mysql-test/mariadb-test-run.pl
+++++ b/mysql-test/mariadb-test-run.pl
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++ # -*- cperl -*-
++
++ # Copyright (c) 2004, 2014, Oracle and/or its affiliates.
++diff --git a/mysql-test/std_data/checkDBI_DBD-MariaDB.pl b/mysql-test/std_data/checkDBI_DBD-MariaDB.pl
++index b078342..ed0f5b4 100755
++--- a/mysql-test/std_data/checkDBI_DBD-MariaDB.pl
+++++ b/mysql-test/std_data/checkDBI_DBD-MariaDB.pl
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++
++ # Copyright (c) 2011, Oracle and/or its affiliates
++ #
++diff --git a/mysql-test/suite/engines/rr_trx/run_stress_tx_rr.pl b/mysql-test/suite/engines/rr_trx/run_stress_tx_rr.pl
++index e997f47..f277bce 100755
++--- a/mysql-test/suite/engines/rr_trx/run_stress_tx_rr.pl
+++++ b/mysql-test/suite/engines/rr_trx/run_stress_tx_rr.pl
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++ ################################################################################
++ #
++ # This script runs the transactional stress test "stress_tx_rr" against the
++diff --git a/mysql-test/suite/funcs_1/lib/DataGen_local.pl b/mysql-test/suite/funcs_1/lib/DataGen_local.pl
++index 8ca7440..738a73e 100755
++--- a/mysql-test/suite/funcs_1/lib/DataGen_local.pl
+++++ b/mysql-test/suite/funcs_1/lib/DataGen_local.pl
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++
++
++ if ( (scalar(@ARGV) != 1 ) || ($ARGV[0] =~ /[^0-9]/i ) )
++diff --git a/mysql-test/suite/funcs_1/lib/DataGen_modify.pl b/mysql-test/suite/funcs_1/lib/DataGen_modify.pl
++index 8ad8e61..4675049 100755
++--- a/mysql-test/suite/funcs_1/lib/DataGen_modify.pl
+++++ b/mysql-test/suite/funcs_1/lib/DataGen_modify.pl
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++
++
++ if ( (scalar(@ARGV) != 2 ) || ($ARGV[0] =~ /[^0-9]/i ) )
++diff --git a/mysql-test/suite/funcs_2/lib/gen_charset_utf8.pl b/mysql-test/suite/funcs_2/lib/gen_charset_utf8.pl
++index c0973a1..3b85ed0 100755
++--- a/mysql-test/suite/funcs_2/lib/gen_charset_utf8.pl
+++++ b/mysql-test/suite/funcs_2/lib/gen_charset_utf8.pl
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++
++ #################################################################################
++ # Author: Serge Kozlov #
++diff --git a/mysql-test/suite/rpl/extension/checksum.pl b/mysql-test/suite/rpl/extension/checksum.pl
++index 8369d1b..f943414 100755
++--- a/mysql-test/suite/rpl/extension/checksum.pl
+++++ b/mysql-test/suite/rpl/extension/checksum.pl
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++
++ # Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
++ #
++diff --git a/scripts/mytop.sh b/scripts/mytop.sh
++index bf4e72e..f7d0fbf 100644
++--- a/scripts/mytop.sh
+++++ b/scripts/mytop.sh
++@@ -1,4 +1,4 @@
++-#!/usr/bin/env perl
+++#!/usr/bin/perl
++ #
++ # $Id: mytop,v 1.99-maria8 2025/07/16 17:59:26 jweisbuch Exp $
++
--- /dev/null
--- /dev/null
++From: Otto Kekalainen <otto@debian.org>
++Date: Sun, 30 Jun 2024 15:18:06 +0000
++Subject: Disable the 'mysql*' command deprecation warning
++
++Many command-line tools expect the commands they run to return without
++any output in stderr or having error codes. The fact that now in MariaDB
++11.4 all 'mysql*' commands emit a deprecation warning causes a lot of
++scripts to fail, such as the /etc/init.d/mariadb itself and many dependent
++programs as witnessed via Debian autopkgtests. See examples below.
++
++https://ci.debian.net/packages/m/mariadb-connector-odbc/testing/amd64/48373500/
++https://ci.debian.net/packages/p/pam-mysql/testing/amd64/48373511/
++https://ci.debian.net/packages/r/roundcube/testing/amd64/48373518/
++
++Forwarded: not-needed
++---
++ mysys/my_init.c | 3 ++-
++ 1 file changed, 2 insertions(+), 1 deletion(-)
++
++diff --git a/mysys/my_init.c b/mysys/my_init.c
++index 3525365..9ec0d61 100644
++--- a/mysys/my_init.c
+++++ b/mysys/my_init.c
++@@ -197,7 +197,8 @@ my_bool my_init(void)
++ #endif
++ if ((res == 0 || my_readlink(link_name, my_progname, MYF(0)) == 0) &&
++ strncmp(link_name + dirname_length(link_name), "mariadb", 7) == 0)
++- my_error(EE_NAME_DEPRECATED, MYF(MY_WME), link_name);
+++ /* Intentionally don't emit any errors for now */
+++ DBUG_PRINT("deprecation warning", "skipped");
++ }
++ }
++
--- /dev/null
--- /dev/null
++From: =?utf-8?b?T3R0byBLZWvDpGzDpGluZW4=?= <otto@debian.org>
++Date: Wed, 26 Nov 2025 16:49:24 -0800
++Subject: Make the new merge_alter test indifferent to extra version info
++
++Modify the test regex to accept any extra version info, just like it
++accepts any server version info. The test is supposed to fail on actual
++differences in behaviour and server info strings are intentionally
++normalized and not regarded.
++
++Without this modification, the test introduced in 9e8e215e would fail
++in post-build MTR on "from Debian-log" and in autopkgtest on "from Debian":
++
++ main.merge_alter w4 [ fail ]
++ Test ended at 2025-11-26 22:41:38
++ CURRENT_TEST: main.merge_alter
++ /usr/share/mariadb/mariadb-test/main/merge_alter.result 2025-11-13 11:45:29.000000000 +0300
++ /tmp/tmp.3vGjZWHA79/var/4/log/merge_alter.reject 2025-11-27 01:41:38.523996124 +0300
++ @@ -10,7 +10,7 @@
++ /*!50003 SET @OLD_COMPLETION_TYPE=@@COMPLETION_TYPE,COMPLETION_TYPE=0*/;
++ DELIMITER /*!*/;
++ # at #
++ -#010909 4:46:40 server id # end_log_pos # CRC32 XXX Start: binlog v 4, server v #.##.## created 010909 4:46:40 at startup
++ +#010909 4:46:40 server id # end_log_pos # CRC32 XXX Start: binlog v 4, server v #.##.## from Debian created 010909 4:46:40 at startup
++ ROLLBACK/*!*/;
++ # at #
++ #010909 4:46:40 server id # end_log_pos # CRC32 XXX Gtid list []
++ Result length mismatch
++
++Forwarded: not-needed
++---
++ mysql-test/main/merge_alter.test | 2 +-
++ 1 file changed, 1 insertion(+), 1 deletion(-)
++
++diff --git a/mysql-test/main/merge_alter.test b/mysql-test/main/merge_alter.test
++index 8094fd4..fb0bc49 100644
++--- a/mysql-test/main/merge_alter.test
+++++ b/mysql-test/main/merge_alter.test
++@@ -14,7 +14,7 @@ insert into t values(1,1,1);
++
++ flush logs;
++ let $MYSQLD_DATADIR= `select @@datadir`;
++---replace_regex /server id [0-9]*/server id #/ /server v [^ ]*/server v #.##.##/ /exec_time=[0-9]*/exec_time=#/ /thread_id=[0-9]*/thread_id=#/ /table id [0-9]*/table id #/ /mapped to number [0-9]*/mapped to number #/ /end_log_pos [0-9]*/end_log_pos #/ /# at [0-9]*/# at #/ /CRC32 0x[0-9a-f]*/CRC32 XXX/ /collation_server=[0-9]+/collation_server=X/ /character_set_client=[a-zA-Z0-9]+/character_set_client=X/ /collation_connection=[0-9]+/collation_connection=X/ /xid=\d*/xid=<xid>/
+++--replace_regex /server id [0-9]*/server id #/ /server v [^ ]*/server v #.##.##/ /## [a-zA-Z0-9- ]+ created/## created/ /exec_time=[0-9]*/exec_time=#/ /thread_id=[0-9]*/thread_id=#/ /table id [0-9]*/table id #/ /mapped to number [0-9]*/mapped to number #/ /end_log_pos [0-9]*/end_log_pos #/ /# at [0-9]*/# at #/ /CRC32 0x[0-9a-f]*/CRC32 XXX/ /collation_server=[0-9]+/collation_server=X/ /character_set_client=[a-zA-Z0-9]+/character_set_client=X/ /collation_connection=[0-9]+/collation_connection=X/ /xid=\d*/xid=<xid>/
++ --exec $MYSQL_BINLOG --base64-output=decode-rows -v -v $MYSQLD_DATADIR/master-bin.000001
++
++ drop table t,t3;
--- /dev/null
--- /dev/null
++From: Michael Biebl <biebl@debian.org>
++Date: Mon, 22 Jan 2024 22:52:25 +0100
++Subject: Install PAM modules and systemd units into /usr
++
++Since Debian trixie all files need to be installed into their canonical
++location under /usr.
++
++Origin: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1061348
++Forwarded: https://github.com/MariaDB/server/pull/4065
++---
++ cmake/install_layout.cmake | 4 ++--
++ 1 file changed, 2 insertions(+), 2 deletions(-)
++
++diff --git a/cmake/install_layout.cmake b/cmake/install_layout.cmake
++index 55e960a..d52836a 100644
++--- a/cmake/install_layout.cmake
+++++ b/cmake/install_layout.cmake
++@@ -196,10 +196,10 @@ SET(INSTALL_MYSQLDATADIR_DEB "/var/lib/mysql")
++
++ SET(INSTALL_RUNDATADIR_DEB "/run/mysqld")
++ SET(INSTALL_UNIX_ADDRDIR_DEB "${INSTALL_RUNDATADIR_DEB}/mysqld.sock")
++-SET(INSTALL_SYSTEMD_UNITDIR_DEB "/lib/systemd/system")
+++SET(INSTALL_SYSTEMD_UNITDIR_DEB "/usr/lib/systemd/system")
++ SET(INSTALL_SYSTEMD_SYSUSERSDIR_DEB "/usr/lib/sysusers.d")
++ SET(INSTALL_SYSTEMD_TMPFILESDIR_DEB "/usr/lib/tmpfiles.d")
++-SET(INSTALL_PAMDIR_DEB "/lib/${CMAKE_CXX_LIBRARY_ARCHITECTURE}/security")
+++SET(INSTALL_PAMDIR_DEB "/usr/lib/${CMAKE_CXX_LIBRARY_ARCHITECTURE}/security")
++ SET(INSTALL_PAMDATADIR_DEB "/etc/security")
++
++ #
--- /dev/null
--- /dev/null
++From: Sutou Kouhei <kou@clear-code.com>
++Date: Sat, 5 Feb 2022 11:05:39 +0900
++Subject: cmake: add support for reproducible buildS
++
++We should use relative path not absolute path. We can use target without
++breaking reproducibility.
++
++This patch can be removed once MariaDB ships with Mroonga v12.00+ that has
++https://github.com/mroonga/mroonga/commit/27caeb9b8ce7fa432b1251eca475b517c6902a6c
++
++Origin: https://github.com/mroonga/mroonga/issues/298#issuecomment-1030815927
++Bug: https://github.com/mroonga/mroonga/issues/298
++Forwarded: not-needed
++---
++ storage/mroonga/CMakeLists.txt | 12 ++++--------
++ 1 file changed, 4 insertions(+), 8 deletions(-)
++
++diff --git a/storage/mroonga/CMakeLists.txt b/storage/mroonga/CMakeLists.txt
++index 1538b6c..fe931a1 100644
++--- a/storage/mroonga/CMakeLists.txt
+++++ b/storage/mroonga/CMakeLists.txt
++@@ -222,7 +222,7 @@ set(MYSQL_INCLUDE_DIRS
++
++ if(MRN_BUNDLED)
++ set(MYSQL_PLUGIN_DIR "${INSTALL_PLUGINDIR}")
++- set(MYSQL_SERVICES_LIB_DIR "${MYSQL_BUILD_DIR}/libservices")
+++ set(MYSQL_SERVICES_LIB_DIR)
++ set(MYSQL_CFLAGS "${CMAKE_C_FLAGS}")
++ set(MYSQL_VERSION "${MYSQL_BASE_VERSION}")
++ else()
++@@ -261,15 +261,11 @@ endif()
++
++ if(MRN_GROONGA_BUNDLED)
++ set(GROONGA_INCLUDE_DIRS "${MRN_BUNDLED_GROONGA_DIR}/include")
++- set(GROONGA_LIBRARY_DIRS "${MRN_BUNDLED_GROONGA_DIR}/lib")
++- set(GROONGA_LIBRARIES "libgroonga")
+++ set(GROONGA_LIBRARY "libgroonga")
++
++- set(MRN_LIBRARY_DIRS ${GROONGA_LIBRARY_DIRS})
++- set(MRN_LIBRARIES ${GROONGA_LIBRARIES})
+++ set(MRN_LIBRARY_DIRS)
+++ set(MRN_LIBRARIES ${GROONGA_LIBRARY})
++ if(MRN_GROONGA_NORMALIZER_MYSQL_EMBED)
++- set(MRN_LIBRARY_DIRS
++- ${MRN_LIBRARY_DIRS}
++- "${MRN_BUNDLED_GROONGA_NORMALIZER_MYSQL_DIR}/normalizers")
++ set(MRN_LIBRARIES ${MRN_LIBRARIES} mysql_normalizer)
++ endif()
++ else()
--- /dev/null
--- /dev/null
++env-perl-usr-bin-perl.patch
++mroonga-mrn-lib-dirs-path-reproducible-build.patch
++install-files-into-usr.patch
++startup-message.patch
++hide-mysql-command-deprecation-warnings.patch
++Fix-misc-spelling-in-MariaDB-Server-repository.patch
++Improve-output-from-mariadb-secure-installation-to-be-mor.patch
++MDEV-37411-suppress-new-warning-about-native-aio.patch
++include-debian-in-test-merge-alter-result.patch
++sysusers-lock-mysql-account.patch
++systemd-hardening-safe-defaults.patch
++MDEV-38811-skip-grant-tables-crash.patch
--- /dev/null
--- /dev/null
++From: Otto Kekalainen <otto@debian.org>
++Date: Sun, 10 Mar 2024 16:56:13 +0000
++Subject: Show banner in server and client startup to drive community
++ engagement
++
++Suggest to users that they can support MariaDB development by simply giving a
++star on GitHub. This patch experiments with how well such a banner works, and
++may later change the contents to drive some other kind of engagement.
++
++Client output:
++
++ Welcome to the MariaDB monitor. Commands end with ; or \g.
++ Your MariaDB connection id is 17
++ Server version: 11.8.1-MariaDB-5 from Debian -- Please help get to 10k stars at https://github.com/MariaDB/Server
++
++ Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.
++
++ Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
++
++ MariaDB [(none)]>
++
++Server output:
++ [Note] Please help get to 10k stars at https://github.com/MariaDB/Server
++
++Server output if built in git directory:
++ [Note] Starting MariaDB 11.8.1-MariaDB-5 from Debian source revision 1a9c3debfd6b1b16af4e501d3530b866b85c38a8 server_uid eNAjF8/wvUNM09/mSmh+k3a5o5w= as process 1359
++
++Logs will also show as server output:
++ mysqld: Version: '11.8.1-MariaDB-5 from Debian' socket: '/run/mysqld/mysqld.sock' port: 3306 -- Please help get to 10k stars at https://github.com/MariaDB/Server
++
++This patch can be dropped if Debian updates to ship
++
++Something similar was merged in https://github.com/MariaDB/server/commit/346c7afe9b7071ce9c47892a83d69944b608b3da
++and thus included in MariaDB 12.3 onward.
++
++Forwarded: not-needed
++---
++ sql/mysqld.cc | 20 +++++++++++++++-----
++ 1 file changed, 15 insertions(+), 5 deletions(-)
++
++diff --git a/sql/mysqld.cc b/sql/mysqld.cc
++index 251c342..c8595a5 100644
++--- a/sql/mysqld.cc
+++++ b/sql/mysqld.cc
++@@ -5043,13 +5043,23 @@ static int init_server_components()
++
++ /*
++ Print source revision hash, as one of the first lines, if not the
++- first in error log, for troubleshooting and debugging purposes
+++ first in error log, for troubleshooting and debugging purposes.
+++ If not, suggest database admin to help project by giving a star
+++ on GitHub.
++ */
++ if (!opt_help)
++- sql_print_information("Starting MariaDB %s source revision %s "
++- "server_uid %s as process %lu",
++- server_version, SOURCE_REVISION, server_uid,
++- (ulong) getpid());
+++ if (SOURCE_REVISION) {
+++ sql_print_information("Starting MariaDB %s source revision %s "
+++ "server_uid %s as process %lu",
+++ server_version, SOURCE_REVISION, server_uid,
+++ (ulong) getpid());
+++ } else {
+++ sql_print_information("Starting MariaDB %s server_uid %s "
+++ "as process %lu",
+++ server_version, server_uid, (ulong) getpid());
+++ sql_print_information("Please help get to 10k stars at "
+++ "https://github.com/MariaDB/server");
+++ }
++
++ #ifdef WITH_PERFSCHEMA_STORAGE_ENGINE
++ /*
--- /dev/null
--- /dev/null
++From: Aquila Macedo <aquilamacedo@riseup.net>
++Date: Thu, 15 Jan 2026 19:53:16 -0500
++Subject: Add safe hardening to mariadb.service units
++
++Add low regression systemd hardening directives to mariadb.service and
++mariadb@.service to improve 'systemd-analyze security' without touching
++the historically-problematic areas (capability bounding /
++NoNewPrivileges / PrivateDevices). Refs: MDEV-10404, MDEV-19878,
++MDEV-36591, MDEV-36681
++
++Includes kernel/cgroup protections, disables realtime scheduling, locks
++personality, and restricts namespace creation (overrideable via drop-in)
++
++This patch should be submitted upstream once proven stable in Debian.
++
++Forwarded: no
++---
++ support-files/mariadb.service.in | 21 +++++++++++++++++++++
++ support-files/mariadb@.service.in | 21 +++++++++++++++++++++
++ 2 files changed, 42 insertions(+)
++
++diff --git a/support-files/mariadb.service.in b/support-files/mariadb.service.in
++index 16c905c..85360e4 100644
++--- a/support-files/mariadb.service.in
+++++ b/support-files/mariadb.service.in
++@@ -59,6 +59,27 @@ ProtectSystem=full
++ # Doesn't yet work properly with SELinux enabled
++ # NoNewPrivileges=true
++
+++# Restrict modifications of kernel interfaces from the MariaDB service context.
+++
+++# Note: ProtectKernelTunables makes /proc and /sys read-only, but it does not
+++# necessarily remount separate sub-mounts under /sys/fs (for example cgroupfs
+++# at /sys/fs/cgroup and selinuxfs at /sys/fs/selinux), so writes there may
+++# still be allowed.
+++ProtectKernelTunables=true
+++ProtectKernelModules=true
+++ProtectControlGroups=true
+++
+++# Prevent creating real-time scheduling policies.
+++RestrictRealtime=true
+++
+++# Prevent changing process personality(2)
+++LockPersonality=true
+++
+++# Restrict use of Linux namespaces by the daemon and its children, MariaDB
+++# server core does not require namespace creation in typical operation
+++# (override via drop-in if needed).
+++RestrictNamespaces=true
+++
++ # Prevent accessing /home, /root and /run/user
++ ProtectHome=true
++
++diff --git a/support-files/mariadb@.service.in b/support-files/mariadb@.service.in
++index 3fd37c3..9a186d9 100644
++--- a/support-files/mariadb@.service.in
+++++ b/support-files/mariadb@.service.in
++@@ -190,6 +190,27 @@ ProtectSystem=full
++ # (https://github.com/systemd/systemd/issues/3845)
++ # NoNewPrivileges=true
++
+++# Restrict modifications of kernel interfaces from the MariaDB service context.
+++
+++# Note: ProtectKernelTunables makes /proc and /sys read-only, but it does not
+++# necessarily remount separate sub-mounts under /sys/fs (for example cgroupfs
+++# at /sys/fs/cgroup and selinuxfs at /sys/fs/selinux), so writes there may
+++# still be allowed.
+++ProtectKernelTunables=true
+++ProtectKernelModules=true
+++ProtectControlGroups=true
+++
+++# Prevent creating real-time scheduling policies.
+++RestrictRealtime=true
+++
+++# Prevent changing process personality(2)
+++LockPersonality=true
+++
+++# Restrict use of Linux namespaces by the daemon and its children, MariaDB
+++# server core does not require namespace creation in typical operation
+++# (override via drop-in if needed).
+++RestrictNamespaces=true
+++
++ # Prevent accessing /home, /root and /run/user
++ ProtectHome=true
++
--- /dev/null
--- /dev/null
++From: Aquila Macedo <aquilamacedo@riseup.net>
++Date: Thu, 8 Jan 2026 21:34:26 -0300
++Subject: sysusers.d: lock mysql user and keep Debian home/shell
++
++Use u! and set HOME=/nonexistent and shell=/bin/false for the mysql
++user.
++
++This patch should be submitted upstream once proven stable in Debian.
++
++Forwarded: no
++---
++ support-files/sysusers.conf.in | 2 +-
++ 1 file changed, 1 insertion(+), 1 deletion(-)
++
++diff --git a/support-files/sysusers.conf.in b/support-files/sysusers.conf.in
++index a975b29..8de384f 100644
++--- a/support-files/sysusers.conf.in
+++++ b/support-files/sysusers.conf.in
++@@ -1 +1 @@
++-u @MYSQLD_USER@ - "MariaDB" @MYSQL_DATADIR@
+++u! @MYSQLD_USER@ - "MariaDB Server" /nonexistent /bin/false
--- /dev/null
- "Project-Id-Version: templates\n"
+# translation of templates.po to Arabic
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Ossama M. Khayat <okhayat@yahoo.com>, 2007.
+msgid ""
+msgstr ""
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2007-05-01 13:04+0300\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5\n"
- ": n%100>=3 && n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5\n"
- ": n%100>=3 && n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5\n"
- ": n%100>=3 && n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5\n"
- ": n%100>=3 && n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5\n"
- ": n%100>=3 && n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5\n"
- ": n%100>=3 && n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Ossama M. Khayat <okhayat@yahoo.com>\n"
+"Language-Team: Arabic <support@arabeyes.org>\n"
+"Language: ar\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: nplurals=6; plural=n==1 ? 0 : n==0 ? 1 : n==2 ? 2: n%100>=3 && "
- msgstr ""
++"n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5;\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++msgstr "سيتم حفظ دليل البيانات القديم في موقع جديد"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
++"يوجد ملف باسم /var/lib/mysql/debian-*.flag على هذا النظام. يشير الرقم إلى "
++"إصدار تنسيق قاعدة البيانات الثنائي الذي لا يمكن ترقيته (أو تخفيضه) تلقائيًا."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
++"لذلك سيتم إعادة تسمية دليل البيانات السابق إلى /var/lib/mysql-* وسيتم تهيئة "
++"دليل بيانات جديد في /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
++"يرجى تصدير/استيراد بياناتك يدويًا (مثلاً باستخدام mysqldump) إذا لزم الأمر."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "ملاحظة هامة لمستخدمي NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- #, fuzzy
- #| msgid ""
- #| "You should also check the permissions and the owner of the /var/lib/mysql "
- #| "directory:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
++"يتم إنشاء حسابات النظام المحلية بواسطة systemd-sysusers الذي يحرر ملفات /etc/"
++"passwd و/etc/group مباشرة، دون استخدام NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
- msgstr "عليك أيضاً أن تقوم بالتأكد من صلاحيات مالك الملف /var/lib/mysql: "
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"في إعدادات NIS/YP، قد ينشئ هذا الحزمة مستخدم/مجموعة 'mysql' محلية أثناء "
++"التثبيت/الترقية. يرجى التحقق من إعداد nsswitch.conf الخاص بك والتأكد من أنه "
++"يتوافق مع سياساتك المحلية."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr "يجب عليك أيضًا التحقق من أذونات وملكية /var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "إزالة جميع قواعد بيانات MariaDB؟"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr "الدليل /var/lib/mysql الذي يحتوي قواعد بيانات MariaDB ستتم إزالته."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"إن كنت تقوم بإزالة حزمة MariaDB كي تقوم لاحقاً بتثبيت نسخة أحدث أو إن كانت "
+"حزمة mariadb-server مختلفة تستخدمها، فيجب إبقاء البيانات."
--- /dev/null
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2017-03-20 17:55+0100\n"
+# mariadb (debconf) translation to Catalan.
+# his file is distributed under the same license as the mariadb package.
+# Aleix Badia i Bosch <abadia@ica.es> 2004
+# Innocent De Marchi <tangram.peces@gmail.com> 2017
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Innocent De Marchi <tangram.peces@gmail.com>\n"
+"Language-Team: Debian l10n Catalan <debian-l10n-catalan@lists.debian.org>\n"
+"Language: ca\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "El directori de dades antigues es desarà a una nova localització"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Ja hi ha un fitxer amb el nom «/var/lib/mysql/debian-*.flag» en aquests "
+"sistema. El número indica la versió de format binari de la base de dades que "
+"no és possible actualitzar (o tornar a una versió anterior) automàticament."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"En conseqüència, el directori de dades anterior serà renomenat a «/var/lib/"
+"mysql-*» i s'iniciarà un nou directori de dades a «/var/lib/mysql»."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Si us plau, importau o exportau manualment les vostres dades (p. ex. amb "
+"«mysqldump») si és necessari."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Nota important pels usuaris de «NIS/YP»"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Fer servir MariaDB sota «NIS/YP» requereix afegir un compte d'usuari MySQL "
- "al sistema local fent servir:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Els comptes de sistema local es creen mitjançant systemd-sysusers, que edita "
++"directament els fitxers /etc/passwd i /etc/group, sense fer servir NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"En configuracions NIS/YP, aquest paquet pot crear un usuari/grup 'mysql' "
++"local durant la instal·lació/actualització. Verifiqueu la configuració de "
++"nsswitch.conf i assegureu-vos que coincideixi amb la vostra política local."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+"També heu de comprovar els permisos i els propietaris del directori «/var/"
+"lib/mysql»"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Eliminar totes les bases de dades MariaDB?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"El directori «/var/lib/mysql» que conté totes les bases de dades MariaDB "
+"està a punt d'ésser eliminat."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Si estau des-instal·lant el paquet MariaDB amb la intenció d'instal·lar a "
+"continuació una versió més recent o hi ha una versió diferent del paquet "
+"«mariadb-server» que l'està fent servir, cal mantenir les dades."
++
--- /dev/null
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2020-10-18 17:13+0200\n"
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "V systému existuje soubor /var/lib/mysql/debian-*.flag. Číslo znamená "
- "verzi binárního formátu databáze, kterou nelze automaticky aktualizovat "
- "(ani degradovat)."
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Miroslav Kure <kurem@debian.cz>\n"
+"Language-Team: Czech <debian-l10n-czech@lists.debian.org>\n"
+"Language: cs\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "Starý adresář s daty bude uložen na novém místě."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
- "Z tohoto důvodu bude původní adresář přejmenován na /var/lib/mysql-* "
- "a ve /var/lib/mysql se inicializuje nové datové úložiště."
++"V systému existuje soubor /var/lib/mysql/debian-*.flag. Číslo znamená verzi "
++"binárního formátu databáze, kterou nelze automaticky aktualizovat (ani "
++"degradovat)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"Z tohoto důvodu bude původní adresář přejmenován na /var/lib/mysql-* a ve /"
++"var/lib/mysql se inicializuje nové datové úložiště."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Pokud je to potřeba, vyexportujte/naimportujte data ručně (např. pomocí "
+"mysqldump)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Důležitá poznámka pro uživatele NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Používání MariaDB pod NIS/YP vyžaduje, aby byl účet mysql uživatele přidán "
- "na lokálním systému příkazem:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Místní systémové účty jsou vytvářeny systemd-sysusers, který upravuje "
++"soubory /etc/passwd a /etc/group přímo, bez použití NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"V nastaveních NIS/YP může tento balíček vytvořit místního uživatele/skupinu "
++"'mysql' během instalace/aktualizace. Ověřte prosím nastavení nsswitch.conf a "
++"ujistěte se, že odpovídá vaší místní politice."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+"Také byste měli zkontrolovat vlastníka a oprávnění adresáře /var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Odstranit všechny MariaDB databáze?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"Adresář /var/lib/mysql, ve kterém se nachází MariaDB databáze, bude "
+"odstraněn."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Jestliže odstraňujete balík MariaDB za účelem instalace novější verze "
+"MariaDB, nebo pokud tato data souběžně využívá jiný balík mariadb-server, "
+"měli byste data ponechat."
++
--- /dev/null
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2016-07-09 22:41+0200\n"
+# Danish translation mariadb.
+# Copyright (C) 2014 mariadb og nedenstående oversættere.
+# This file is distributed under the same license as the mariadb package.
+# Claus Hindsgaul <claus.hindsgaul@gmail.com>, 2005, 2006, 2007.
+# Joe Hansen <joedalton2@yahoo.dk>, 2014, 2016.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "En fil navngivet /var/lib/msyql/debian-*.flag findes på dette system. "
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
+"Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
+"Language: da\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "Den gamle datamappe vil blive gemt på en ny placering"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
- "ny datamappe vil blive initialiseret i /var/lib/msyql."
++"En fil navngivet /var/lib/mysql/debian-*.flag findes på dette system. "
+"Nummeret antyder en databaseversion i binært format, som ikke automatisk kan "
+"opgraderes (eller nedgraderes)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"Derfor vil den tidligere datamappe blive omdøbt til /var/lib/mysql-* og en "
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"ny datamappe vil blive initialiseret i /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Eksporter/importer venligst manuelt dine data (f.eks. med mysqldump) hvis "
+"krævet."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Vigtig oplysning til NIS/YP-brugere"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Brug af MariaDB under NIS/YP kræver, at en mysql-brugerkonto tilføjes på det "
- "lokale system med:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Lokale systemkonti oprettes af systemd-sysusers som redigerer /etc/passwd- og "
++"/etc/group-filerne direkte, uden at bruge NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Du bør også kontrollere filrettighederne og ejerskabet af mappen /var/lib/"
- "mysql:"
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
+msgstr ""
++"I NIS/YP-opsætninger kan denne pakke oprette en lokal 'mysql' bruger/gruppe "
++"under installation/opgradering. Verificer venligst din nsswitch.conf-"
++"opsætning og sørg for at den matcher din lokale politik."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr ""
++"Du bør også kontrollere filrettighederne og ejerskabet af /var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Fjern alle MariaDB-databaser?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"Mappen /var/lib/mysql, der indeholder MariaDB-databaserne, er ved at blive "
+"fjernet."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Hvis du fjerner MariaDB-pakken for senere at installere en nyere version, "
+"eller hvis en anden mariadb-server-pakke allerede benytter den, bør dataene "
+"bevares."
++
--- /dev/null
- # German translation of mariadb 10.0.13-1
++# German translation of mariadb
+# Alwin Meschede <ameschede@gmx.de>, 2006, 2007.
- # Thomas Mueller <thomas.mueller@tmit.eu>, 2009.
++# Thomas Mueller <thomas.mueller@tmit.eu>, 2009, 2014.
+# Chris Leick <c.leick@vollbio.de>, 2014-2016.
+#
+msgid ""
+msgstr ""
- "Project-Id-Version: mariadb 10.0.25-1\n"
++"Project-Id-Version: mariadb 11.18.3\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2016-05-12 22:39+0100\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Chris Leick <c.leick@vollbio.de>\n"
+"Language-Team: German <debian-l10n-german@lists.debian.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "Das alte Datenverzeichnis wird an einer neuen Stelle gespeichert"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Auf diesem System gibt es bereits eine Datei namens /var/lib/mysql/debian-*."
+"flag. Die Zahl gibt eine Binärformatversion der Datenbank an, von der nicht "
+"automatisch ein Upgrade (oder Downgrade) durchgeführt werden kann."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"Daher wird das vorherige Datenverzeichnis in /var/lib/mysql-* umbenannt und "
+"unter /var/lib/mysql wird ein neues Datenverzeichnis initialisiert."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Bitte exportieren/importieren Sie im Bedarfsfall Ihre Daten (z.B. mit "
+"Mysqldump)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Wichtige Anmerkung für NIS/YP-Benutzer!"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "Falls MariaDB mit NIS/YP genutzt wird, muss ein »mysql«-Benutzerkonto auf "
- "dem lokalen System hinzugefügt werden mit:"
++"Lokale Systemkonten werden von systemd-sysusers erstellt, das die Dateien /"
++"etc/passwd und /etc/group direkt editiert, ohne NIS/LDAP zu verwenden."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
+msgstr ""
- "Sie sollten außerdem Besitzer und Zugriffsrechte des Verzeichnisses /var/lib/"
- "mysql überprüfen:"
++"Bei NIS/YP-Setups kann dieses Paket während der Installation/Aktualisierung "
++"einen lokalen 'mysql'-Benutzer/-Gruppe erstellen. Bitte überprüfen Sie Ihre "
++"nsswitch.conf-Einstellungen und stellen Sie sicher, dass diese mit Ihrer "
++"lokalen Richtlinie übereinstimmen."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr ""
++"Sie sollten außerdem Besitzer und Zugriffsrechte von /var/lib/mysql "
++"überprüfen:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Alle MariaDB-Datenbanken entfernen?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"Das Verzeichnis /var/lib/mysql mit den MariaDB-Datenbanken soll entfernt "
+"werden."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Falls geplant ist, das MariaDB-Paket zu entfernen, um lediglich eine höhere "
+"Version zu installieren oder ein anderes mariadb-server-Paket die Daten "
+"benutzt, sollten diese beibehalten werden."
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "Falls MariaDB mit NIS/YP genutzt wird, muss ein »mysql«-Benutzerkonto wie "
++#~ "folgt auf dem lokalen System hinzugefügt werden:"
--- /dev/null
- "Project-Id-Version: mysql-dfsg-5.1_5.0.24-3\n"
+# MariaDB translation to Spanish
+# Copyright (C) 2005-2016 Software in the Public Interest, SPI Inc.
+# This file is distributed under the same license as the mariadb package.
+#
+# Changes:
+# - Initial translation
+# Jesus Aneiros, 2006
+# - Updated
+# Javier Fernandez-Sanguino, 2006-2007, 2012, 2016
+# - Revision
+# Nacho Barrientos Arias
+# Fernando Cerezal
+# David Martínez Moreno
+# Ricardo Mones
+# Carlos Galisteo
+# Javier Fernandez-Sanguino
+#
+#
+# Traductores, si no conoce el formato PO, merece la pena leer la
+# documentación de gettext, especialmente las secciones dedicadas a este
+# formato, por ejemplo ejecutando:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Equipo de traducción al español, por favor lean antes de traducir
+# los siguientes documentos:
+#
+# - El proyecto de traducción de Debian al español
+# http://www.debian.org/intl/spanish/
+# especialmente las notas y normas de traducción en
+# http://www.debian.org/intl/spanish/notas
+#
+# - La guía de traducción de po's de debconf:
+# /usr/share/doc/po-debconf/README-trans
+# o http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Si tiene dudas o consultas sobre esta traducción consulte con el último
+# traductor (campo Last-Translator) y ponga en copia a la lista de
+# traducción de Debian al español (<debian-l10n-spanish@lists.debian.org>)
+msgid ""
+msgstr ""
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2016-04-30 21:26+0200\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Javier Fernández-Sanguino <jfs@debian.org>\n"
+"Language-Team: Debian l10 Spanish <debian-l10n-spanish@lists.debian.org>\n"
+"Language: Spanish\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-POFile-SpellExtra: YP mariadb lib ej server flag mysqldump mysql var NIS\n"
+"X-POFile-SpellExtra: MariaDB\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "Se guardará el directorio antiguo de datos a la nueva ubicación"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Se ha encontrado un archivo «/var/lib/mysql/debian-*.flag» en el sistema. "
+"Este número indica una versión de base de datos en formato binario que no "
+"puede ser subirse (o bajarse) de versión automáticamente."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"Por tanto, el archivo de datos anterior se renombrará a «/var/lib/mysql-*» y "
+"se inicializará un nuevo directorio de datos en «/var/lib/mysql»."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Si lo necesita, tendrá que exportar e importar sus datos manualmente (p.ej. "
+"con mysqldump)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Nota importante para los usuarios de NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Para utilizar MariaDB bajo NIS/YP es necesario añadir una cuenta de usuario "
- "mysql en el sistema local con:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Las cuentas del sistema local son creadas por systemd-sysusers editando los archivos /etc/"
++"passwd y /etc/group directamente, sin usar NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"En configuraciones NIS/YP, este paquete puede crear un usuario/grupo 'mysql' "
++"local durante la instalación/actualización. Verifique su configuración "
++"nsswitch.conf y asegúrese de que coincida con su política local."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+"También debería comprobar los permisos y el propietario del directorio /var/"
+"lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "¿Desea eliminar todas las bases de datos MariaDB?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"El directorio /var/lib/mysql contiene bases de datos MariaDB que van a "
+"eliminarse."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Debería mantener los datos si tiene planificado instalar una versión de "
+"MariaDB más reciente o si hay un paquete «mariadb-server» distinto que los "
+"está utilizando."
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "Para utilizar MariaDB bajo NIS/YP es necesario añadir una cuenta de "
++#~ "usuario mysql en el sistema local con:"
--- /dev/null
- "Project-Id-Version: eu\n"
+# translation of eu.po to Euskara
+# Piarres BEobide <pi@beobide.net>, 2006.
+# Piarres Beobide <pi@beobide.net>, 2009.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+msgid ""
+msgstr ""
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2009-07-29 11:59+0200\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- msgstr ""
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Piarres Beobide <pi@beobide.net>\n"
+"Language-Team: Euskara <debian-l10n-eu@lists.debian.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++msgstr "Datu direktorio zaharra kokapen berri batean gordeko da"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
++"Sistema honetan /var/lib/mysql/debian-*.flag izeneko fitxategi bat dago. "
++"Zenbakiak automatikoki eguneratu (edo zaharkitu) ezin den datu-basearen "
++"formatu binarioaren bertsioa adierazten du."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
++"Beraz, aurreko datu direktorioa /var/lib/mysql-* gisa berrizendatuko da eta "
++"datu direktorio berri bat hasieratuko da /var/lib/mysql-en."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
++"Mesedez, esportatu/inportatu zure datuak eskuz (adib. mysqldump erabiliz) "
++"beharrezkoa bada."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "NIS/YP erabiltzaileentzat ohar garrantzitsua"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- #, fuzzy
- #| msgid ""
- #| "You should also check the permissions and the owner of the /var/lib/mysql "
- #| "directory:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
++"systemd-sysusers-ek sistema lokaleko kontuak sortzen ditu /etc/passwd eta /"
++"etc/group fitxategiak zuzenean editatuz, NIS/LDAP erabili gabe."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
+msgid ""
- "Honetaz gain /var/lib/mysql direktorioaren jabea eta baimenak egiaztatu "
- "beharko zenituzke:"
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
+msgstr ""
++"NIS/YP konfigurazioetan pakete honek 'mysql' erabiltzaile/grupo lokala sor "
++"dezake instalazioan/eguneratzean. Egiaztatu zure nsswitch.conf konfigurazioa "
++"eta ziurtatu zure politika lokalarekin bat datorrela."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr ""
++"/var/lib/mysql direktorioaren baimenak eta jabetza ere egiaztatu beharko "
++"zenituzke:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Ezabatu MariaDB datubase guztiak?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"MariaDB datubaseak dituen /var/lib/mysql direktorioa ezabatua izango da."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"MariaDB paketea beranduago bertsio berriago bat instalatzeko kentzen ari "
+"bazara, edo beste mariadb-server pakete bat berau erabiltzen ari bada, "
+"datuak mantendu egin beharko lirateke."
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "MariaDB NIS/YP-ren azpian erabiltzeak mysql erabiltzaile kontu bat "
++#~ "gehitzea eskatzen du sistema lokalean honekin:"
--- /dev/null
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2017-03-15 22:36+0200\n"
+# Finnish translations for mariadb package
+# This file is distributed under the same license as the mariadb package.
+# Antti Järvinen <antti.jarvinen@katiska.org>, 2017.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: antti.jarvinen@katiska.org\n"
+"Language-Team: \n"
+"Language: fi\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "Vanha datahakemisto tullaan tallentamaan uuteen paikkaan"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Järjestelmässä on tiedosto /var/lib/mysql/debian-*.flag. Numero osoittaa "
+"tietokantatiedoston binääriformaatin version, josta/johon päivittäminen ei "
+"automaattisesti onnistu. "
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"Siksipä vanha datahakemisto tullaan siirtämään nimelle /var/lib/mysql-* ja "
+"uudet tiedostot luodaan hakemistoon /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Tarpeittesi mukaan tuo tai vie tietokannan sisältö käsipelillä, esim. "
+"käyttäen mysqldump-ohjelmaa."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Merkittävä huomio NIS/YP -käyttäjille"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "MariaDB:n käyttäminen NIS/YP:n kanssa edellyttää, että järjestelmään luodaan "
- "käyttäjätunnus mysql:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Paikalliset järjestelmätunnukset luodaan systemd-sysusers-ohjelmalla, joka "
++"muokkaa /etc/passwd- ja /etc/group-tiedostoja suoraan käyttämättä NIS/LDAP:ia."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"NIS/YP-asetuksissa tämä paketti voi luoda paikallisen 'mysql'-käyttäjän/"
++"ryhmän asennuksen/päivityksen aikana. Tarkista nsswitch.conf-asetuksesi ja "
++"varmista, että se vastaa paikallista käytäntöäsi."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr "Tarkista myös hakemiston /var/lib/mysql omistaja ja oikeudet:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Poistetaanko kaikki MariaDB-tietokannat?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"MariaDB-tietokannat sisältävä hakemisto /var/lib/mysql ollaan poistamassa."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Jos poistat MariaDB-paketin asentaaksesi uudemman version tai jos joku muu "
+"mariadb-server -paketti jo käyttää tietoja, tiedot tulisi säästää. "
++
--- /dev/null
- # Translation of mariadb debconf templates to French
+# Copyright (C) 2004-2016 Debian French l10n team <debian-l10n-french@lists.debian.org>
- # This file is distributed under the same license as the mariadb packages.
- #
++# French translation of mariadb
++# This file is distributed under the same license as the mariadb package.
+# Translators:
- # Christian Perrier <bubulle@debian.org>, 2004, 2006, 2007, 2009, 2013.
+# Baptiste Jammet <baptiste@mailoo.org>, 2016.
++# Christian Perrier <bubulle@debian.org>, 2004-2013
++# bubu <bubub@no-log.org>, 2023.
++#
+msgid ""
+msgstr ""
- "Project-Id-Version: fr\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2016-12-31 18:35+0100\n"
- "Last-Translator: Baptiste Jammet <baptiste@mailoo.org>\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
++"Last-Translator: bubu <bubub@no-log.org>\n"
+"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
+"Language: fr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
- "debian.org>\n"
- "X-Generator: Lokalize 1.5\n"
- "Plural-Forms: Plural-Forms: nplurals=2; plural=n>1;\n"
++"X-Generator: Poedit 2.4.2\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "L'ancien répertoire de données sera sauvegardé à un nouvel emplacement"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
- "Un fichier nommé /var/lib/mysql/debian-*.flag existe déjà sur ce système. Le "
++"Un fichier nommé /var/lib/mysql/debian-*.flag existe sur ce système. Le "
+"numéro indique une version de base de données au format binaire qui ne peut "
- "pas être mise à niveau (ou rétrogradée) automatiquement."
++"être mise à niveau automatiquement (ni rétrogradée)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
- "L'ancien répertoire sera renommé en /var/lib/mysql-* et un nouveau "
- "répertoire de données sera initialisé à l'emplacement /var/lib/mysql."
++"Par conséquent, le répertoire de données précédent sera renommé /var/lib/"
++"mysql.* et un nouveau répertoire sera initialisé à /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
- "Veuillez exporter puis importer vos données manuellement si besoin (par "
- "exemple avec mysqldump)."
++"Veuillez importer et exporter vos données manuellement (par exemple avec "
++"mysqldump) si nécessaire."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
- msgstr "Note importante pour les utilisateurs NIS/YP"
++msgstr "Remarque importante pour les utilisateurs de NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "L'utilisation de MariaDB avec NIS/YP impose l'ajout d'un compte local "
- "« mysql » avec la commande :"
++"Les comptes système locaux sont créés par systemd-sysusers qui édite "
++"directement les fichiers /etc/passwd et /etc/group, sans utiliser NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"Dans les configurations NIS/YP, ce paquet peut créer un utilisateur/groupe "
++"'mysql' local lors de l'installation/de la mise à niveau. Veuillez vérifier "
++"votre configuration nsswitch.conf et vous assurer qu'elle correspond à votre "
++"politique locale."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
- "Vous devez également vérifier le propriétaire et les permissions du "
- "répertoire /var/lib/mysql :"
++"Vous devriez aussi vérifier les permissions et le propriétaire de /var/lib/"
++"mysql :"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Faut-il supprimer toutes les bases de données MariaDB ?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
- "Le répertoire /var/lib/mysql qui contient les bases de données de MariaDB va "
- "être supprimé."
++"Le répertoire /var/lib/mysql qui contient les bases de données MariaDB est "
++"sur le point d'être supprimé."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
- "Si vous retirez le paquet MariaDB en vue d'en installer une version plus "
- "récente ou si un autre paquet mariadb-server les utilise déjà, vous devriez "
- "les conserver."
++"Si vous supprimez le paquet MariaDB pour installer ultérieurement une "
++"version plus récente ou si un autre paquet mariadb-server l'utilise déjà, "
++"les données devraient être conservées."
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "L'utilisation de MariaDB sous NIS/YP nécessite qu'un compte utilisateur "
++#~ "« mysql » soit ajouté au système local avec :"
--- /dev/null
- # Galician translation of mysql-dfsg-5.1's debconf templates
- # This file is distributed under the same license as the mysql-dfsg-5.1 package.
++# Galician translation of mariadb debconf templates
++# This file is distributed under the same license as the mariadb package.
+# Jacobo Tarrio <jtarrio@debian.org>, 2007.
+#
+msgid ""
+msgstr ""
- "Project-Id-Version: mysql-dfsg-5.1\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2007-04-20 09:44+0200\n"
- "Last-Translator: Jacobo Tarrio <jtarrio@debian.org>\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
++"Last-Translator: Pablo <parodper@gmail.com>\n"
+"Language-Team: Galician <proxecto@trasno.net>\n"
+"Language: gl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
++"Plural-Forms: nplurals=2; plural=(n != 1);\n"
++"X-Generator: Poedit 3.2.2\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
- msgstr ""
++msgstr "O antigo directorio con datos gardarase noutro sitio."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
++"Xa existe un ficheiro chamado /var/lib/mysql/debian-*.flag. O número indica "
++"unha versión do formato binario da base de datos que non se pode actualizar "
++"(ou desactualizar) de forma automática."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
++"Por mor disto, o directorio de datos antigo moverase a /var/lib/mysql-* e "
++"crearase un novo directorio de datos en /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
++"Se o precisa, exporte e importe os datos de forma manual (v.g. con "
++"mysqldump)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
- msgstr "Nota importante para os usuarios de NIS/YP"
++msgstr "Aviso importante se usa NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
++"As contas de sistema local créanse mediante systemd-sysusers, que edita os "
++"ficheiros /etc/passwd e /etc/group directamente, sen usar NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
- #, fuzzy
- #| msgid ""
- #| "You should also check the permissions and the owner of the /var/lib/mysql "
- #| "directory:"
+msgid ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
+msgstr ""
- "Tamén debería comprobar os permisos e o propietario do directorio /var/lib/"
- "mysql:"
++"En configuracións NIS/YP, este paquete pode crear un usuario/grupo 'mysql' "
++"local durante a instalación/actualización. Verifique a configuración de "
++"nsswitch.conf e asegúrese de que coincide coa súa política local."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr "Tamén comprobe os permisos e propietario de /var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
- msgstr "¿Eliminar tódalas bases de datos de MariaDB?"
++msgstr "Eliminar todas as bases de datos MariaDB?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
- "Hase eliminar o directorio /var/lib/mysql, que contén as bases de datos de "
- "MariaDB."
++"Vaise eliminar o directorio /var/lib/mysql con todas as base de datos MariaDB"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
- "Se está a eliminar o paquete MariaDB para instalar despois unha versión máis "
- "recente ou se xa hai un paquete mariadb-server diferente a empregalo, "
- "debería conservar os datos."
++"Recomendamos que non elimine os datos se vai eliminar o paquete MariaDB para "
++"instalar unha versión máis nova, ou se inda os usa algún paquete mariadb-"
++"server."
++
--- /dev/null
--- /dev/null
++# Hindi translation of mariadb debconf templates
++# Copyright (C) 2025 MariaDB Foundation
++# This file is distributed under the same license as the mariadb package.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: mariadb\n"
++"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
++"Last-Translator: Debian Hindi Team <debian-l10n-hindi@lists.debian.org>\n"
++"Language-Team: Hindi <debian-l10n-hindi@lists.debian.org>\n"
++"Language: hi\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"Plural-Forms: nplurals=2; plural=(n != 1);\n"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid "The old data directory will be saved at new location"
++msgstr "पुरानी डेटा डायरेक्टरी नए स्थान पर सहेजी जाएगी"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid ""
++"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
++"indicates a database binary format version that cannot automatically be "
++"upgraded (or downgraded)."
++msgstr ""
++"इस सिस्टम पर /var/lib/mysql/debian-*.flag नाम की फ़ाइल मौजूद है। संख्या एक डेटाबेस "
++"बाइनरी प्रारूप संस्करण को इंगित करती है जिसे स्वचालित रूप से अपग्रेड (या डाउनग्रेड) नहीं "
++"किया जा सकता है।"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid ""
++"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
++"and a new data directory will be initialized at /var/lib/mysql."
++msgstr ""
++"इसलिए पिछली डेटा डायरेक्टरी का नाम बदलकर /var/lib/mysql-* कर दिया जाएगा और /var/"
++"lib/mysql पर एक नई डेटा डायरेक्टरी को आरंभ किया जाएगा।"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid ""
++"Please manually export/import your data (e.g. with mysqldump) if needed."
++msgstr ""
++"यदि आवश्यक हो तो कृपया अपना डेटा मैन्युअल रूप से निर्यात/आयात करें (जैसे mysqldump के साथ)।"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "Important note for NIS/YP users"
++msgstr "NIS/YP उपयोगकर्ताओं के लिए महत्वपूर्ण नोट"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid ""
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
++msgstr ""
++"स्थानीय सिस्टम खाते systemd-sysusers द्वारा बनाए जाते हैं जो /etc/"
++"passwd और /etc/group फ़ाइलों को सीधे संपादित करता है, NIS/LDAP का उपयोग किए बिना।"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"NIS/YP सेटअप में यह पैकेज इंस्टॉलेशन/अपग्रेड के दौरान एक स्थानीय 'mysql' उपयोगकर्ता/समूह "
++"बना सकता है। कृपया अपनी nsswitch.conf सेटअप की जांच करें और सुनिश्चित करें कि यह आपकी "
++"स्थानीय नीति से मेल खाता है।"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr ""
++"आपको /var/lib/mysql डायरेक्टरी की अनुमतियों और स्वामित्व की भी जांच करनी चाहिए:"
++
++#. Type: boolean
++#. Description
++#: ../mariadb-server.templates:4001
++msgid "Remove all MariaDB databases?"
++msgstr "सभी MariaDB डेटाबेस हटाएं?"
++
++#. Type: boolean
++#. Description
++#: ../mariadb-server.templates:4001
++msgid ""
++"The /var/lib/mysql directory which contains the MariaDB databases is about "
++"to be removed."
++msgstr "/var/lib/mysql डायरेक्टरी जिसमें MariaDB डेटाबेस हैं, हटाई जाने वाली है।"
++
++#. Type: boolean
++#. Description
++#: ../mariadb-server.templates:4001
++msgid ""
++"If you're removing the MariaDB package in order to later install a more "
++"recent version or if a different mariadb-server package is already using it, "
++"the data should be kept."
++msgstr ""
++"यदि आप बाद में एक नया संस्करण स्थापित करने के लिए MariaDB पैकेज को हटा रहे हैं या यदि "
++"कोई अन्य mariadb-server पैकेज पहले से ही इसका उपयोग कर रहा है, तो डेटा को रखा जाना "
++"चाहिए।"
++
--- /dev/null
- "Project-Id-Version: mariadb 10.0.13 Italian debconf templates\n"
+# Italian (it) translation of debconf templates for mariadb
+# This file is distributed under the same license as the mariadb package.
+# Luca Monducci <luca.mo@tiscali.it>, 2006-2017.
+#
+msgid ""
+msgstr ""
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2017-083-20 20:29+0100\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Di conseguenza la precedene directory data verrà rinominata in /var/lib/"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
+"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
+"Language: it\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "La vecchia directory data verrà salvata in una nuova posizione"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Su questo sistema esiste già un file con nome /var/lib/mysql/debian-*.flag. "
+"Il numero indica una versione del database in formato binario che non è "
+"possibile promuovere (o retrocedere) a una nuova versione automaticamente."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
- "Se necessario eseguire manualmente l'export/import (per esempio con "
- "mysqldump) dei propri dati."
++"Di conseguenza la precedente directory data verrà rinominata in /var/lib/"
+"mysql-* e verrà preparata una nuova directory data in /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"Se necessario esportare/importare manualmente i propri dati (per esempio con "
++"mysqldump)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Nota importante per gli utenti NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Per usare MariaDB con NIS/YP è necessario aggiungere al sistema un account "
- "utente locale con nome mysql con:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Gli account di sistema locali sono creati da systemd-sysusers che modifica "
++"direttamente i file /etc/passwd e /etc/group, senza usare NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"Nelle configurazioni NIS/YP, questo pacchetto può creare un utente/gruppo "
++"'mysql' locale durante l'installazione/aggiornamento. Verificare la "
++"configurazione di nsswitch.conf e assicurarsi che corrisponda alla propria "
++"politica locale."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+"Inoltre è opportuno verificare i permessi e la proprietà della directory /"
+"var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Eliminare tutti i database MariaDB?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"La directory /var/lib/mysql che contiene i database di MariaDB sta per "
+"essere eliminata."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Se si rimuove il pacchetto MariaDB per poi installare una versione più "
+"recente oppure se sono già in uso da un altro pacchetto mariadb-server, i "
+"dati non devono essere eliminati."
++
--- /dev/null
- "Project-Id-Version: mariadb 10.0.32-1\n"
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+# Hideki Yamane (Debian-JP) <henrich@debian.or.jp>, 2013.
+# Takuma Yamada <tyamada@takumayamada.com>, 2016-2017.
+#
+msgid ""
+msgstr ""
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2016-05-01 11:27+0900\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Takuma Yamada <tyamada@takumayamada.com>\n"
+"Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
+"Language: ja\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Gtranslator 2.91.6\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "古いデータディレクトリは、新しい場所に保存されます"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"/var/lib/mysql/debian-*.flag という名前のファイルがこのシステム上に存在しま"
+"す。番号は、自動的にアップグレード (またはダウングレード) することができない"
+"データベースバイナリフォーマットのバージョンを示します。"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"そのため、以前のデータディレクトリは /var/lib/mysql-* にリネームされ、新しい"
+"データディレクトリは /var/lib/mysql に初期化されます。"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"必要に応じて、(例えば mysqldump で) データを手動でエクスポート/インポートして"
+"ください。"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "NIS/YP ユーザへの重要な注意"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "NIS/YP 配下で MariaDB を使うにはローカルのシステムに mysql のユーザアカウント"
- "を追加するのが必要です。"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
- msgstr "/var/lib/mysql の所有者権限をチェックする必要もあります。"
++"systemd-sysusers は /etc/passwd と /etc/group を直接編集してローカルシステム"
++"アカウントを作成します（NIS/LDAP にはユーザーを作成しません）"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"NIS/YP セットアップでは、このパッケージはインストール/アップグレード中にロー"
++"カルの 'mysql' ユーザー/グループを作成する場合があります。nsswitch.conf の設"
++"定を確認し、ローカルポリシーと一致することを確認してください。"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr "/var/lib/mysql のパーミッションと所有権も確認する必要があります。"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "すべての MariaDB データベースを削除しますか?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"MariaDB データベースを含んでいるディレクトリ /var/lib/mysql を削除しようとし"
+"ています。"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"後でより新しいバージョンのものをインストールしようとするために MariaDB パッ"
+"ケージを削除しようとしている、あるいは別の mariadb-server パッケージを既に"
+"使っている場合、データは保持する必要があります。"
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "NIS/YP 配下で MariaDB を使うにはローカルのシステムに mysql のユーザアカウ"
++#~ "ントを追加するのが必要です。"
--- /dev/null
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2023-03-04 05:18+0100\n"
+# Translation of ka.po to Georgian
+# Copyright (C) 2023, MariaDB authors.
+# This file is distributed under the same license as the mariadb package.
+# Ekaterine Papava <papava.e@gtu.ge>, 2023.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Ekaterine Papava <papava.e@gtu.ge>\n"
+"Language-Team: Georgian <(nothing)>\n"
+"Language: ka\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Poedit 3.2.2\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "ძველი მონაცემების საქაღალდე ახალ მდებარეობაზე იქნება შენახული"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"ამ სისტემაში არსებობს ფაილი სახელით /var/lib/mysql/debian-*.flag. რიცხვი "
+"მიუთითებს ბაზის ბინარული ფორმატის ვერსიაზე, რომლის განახლება (ან ვერსიის "
+"ჩამოწევა) შეუძლებელია."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"ამიტომ წინა მონაცემების საქაღალდეს სახელი /var/lib/mysql-*-ზე გადაერქმევა "
+"და /var/lib/mysql მონაცემების საქაღალდე თავიდან შეიქმნება."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"საჭიროების შემთხვევაში თქვენი მონაცემები ხელით გაიტანეთ/შემოიტანეთ (მაგ: "
+"mysqldump-ით)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "მნიშვნელოვანი შენიშვნა NIS/YP მომხმარებლებისთვის"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "MariaDB-ის გამოყენება NIS/YP-ის ქვეშ გასაშვებად მოითხოვს ლოკალურ სისტემაში "
- "mysql-ის მომხმარებლის დამატებას შემდეგი პარამეტრებით:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"ლოკალური სისტემური ანგარიშები შეიქმნება systemd-sysusers-ის მიერ, რომელიც "
++"პირდაპირ რედაქტირებს /etc/passwd და /etc/group ფაილებს, NIS/LDAP-ის "
++"გამოყენების გარეშე."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"NIS/YP კონფიგურაციებში ეს პაკეტი შეიძლება შექმნას ლოკალური 'mysql' "
++"მომხმარებელი/ჯგუფი ინსტალაციის/განახლების დროს. გთხოვთ, შეამოწმოთ თქვენი "
++"nsswitch.conf კონფიგურაცია და დარწმუნდეთ, რომ ის ემთხვევა თქვენს ლოკალურ "
++"პოლიტიკას."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr "ასევე შეამოწმეთ /var/lib/mysql საქაღალდის წვდომები და მფლობელი:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "წავშალო MariaDB-ის ყველა ბაზა?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"საქაღალდე /var/lib/mysql, რომელიც MariaDB-ის მონაცემთა ბაზებს შეიცავს, "
+"წაიშლება."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"თუ შლით MariaDB-ის პაკეტს იმისთვის, რომ მოგვიანებით უფრო ახალი ვერსია "
+"დააყენოთ ან mariadb-server-ის სხვა პაკეტი უკვე იყენებს მას, მონაცემები უნდა "
+"შენარჩუნდეს."
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "MariaDB-ის გამოყენება NIS/YP-ის ქვეშ გასაშვებად მოითხოვს ლოკალურ "
++#~ "სისტემაში mysql-ის მომხმარებლის დამატებას შემდეგი პარამეტრებით:"
--- /dev/null
--- /dev/null
++# Korean translation of mariadb debconf templates
++# Copyright (C) 2025 MariaDB Foundation
++# This file is distributed under the same license as the mariadb package.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: mariadb\n"
++"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
++"Last-Translator: Debian Korean Team <debian-l10n-korean@lists.debian.org>\n"
++"Language-Team: Korean <debian-l10n-korean@lists.debian.org>\n"
++"Language: ko\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"Plural-Forms: nplurals=1; plural=0;\n"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid "The old data directory will be saved at new location"
++msgstr "이전 데이터 디렉터리는 새로운 위치에 저장됩니다"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid ""
++"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
++"indicates a database binary format version that cannot automatically be "
++"upgraded (or downgraded)."
++msgstr ""
++"이 시스템에 /var/lib/mysql/debian-*.flag라는 파일이 있습니다. 이 숫자는 자동"
++"으로 업그레이드(또는 다운그레이드)할 수 없는 데이터베이스 바이너리 형식 버전"
++"을 나타냅니다."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid ""
++"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
++"and a new data directory will be initialized at /var/lib/mysql."
++msgstr ""
++"따라서 이전 데이터 디렉터리의 이름이 /var/lib/mysql-*로 변경되고 /var/lib/"
++"mysql에 새 데이터 디렉터리가 초기화됩니다."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid ""
++"Please manually export/import your data (e.g. with mysqldump) if needed."
++msgstr ""
++"필요한 경우 데이터를 수동으로 내보내기/가져오기하십시오(예: mysqldump 사용)."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "Important note for NIS/YP users"
++msgstr "NIS/YP 사용자를 위한 중요 참고사항"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid ""
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
++msgstr ""
++"systemd-sysusers는 /etc/passwd 및 /etc/group 파일을 직접 편집하여 로컬 시스템 "
++"계정을 생성하며, NIS/LDAP를 사용하지 않습니다."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"NIS/YP 설정에서 이 패키지는 설치/업그레이드 중에 로컬 'mysql' 사용자/그룹을 "
++"생성할 수 있습니다. nsswitch.conf 설정을 확인하고 로컬 정책과 일치하는지 확인"
++"하십시오."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr "/var/lib/mysql 디렉터리의 권한과 소유권도 확인해야 합니다:"
++
++#. Type: boolean
++#. Description
++#: ../mariadb-server.templates:4001
++msgid "Remove all MariaDB databases?"
++msgstr "모든 MariaDB 데이터베이스를 제거하시겠습니까?"
++
++#. Type: boolean
++#. Description
++#: ../mariadb-server.templates:4001
++msgid ""
++"The /var/lib/mysql directory which contains the MariaDB databases is about "
++"to be removed."
++msgstr "MariaDB 데이터베이스가 포함된 /var/lib/mysql 디렉터리가 제거됩니다."
++
++#. Type: boolean
++#. Description
++#: ../mariadb-server.templates:4001
++msgid ""
++"If you're removing the MariaDB package in order to later install a more "
++"recent version or if a different mariadb-server package is already using it, "
++"the data should be kept."
++msgstr ""
++"나중에 더 최신 버전을 설치하기 위해 MariaDB 패키지를 제거하거나 다른 mariadb-"
++"server 패키지가 이미 사용 중인 경우 데이터를 유지해야 합니다."
--- /dev/null
- "Project-Id-Version: mysql_nb\n"
+# translation of mysql_nb.po to Norwegian Bokmål
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+#
+# Bjørn Steensrud <bjornst@powertech.no>, 2007.
+msgid ""
+msgstr ""
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2007-02-18 12:13+0100\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Language: \n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Bjørn Steensrud <bjornst@powertech.no>\n"
+"Language-Team: Norwegian Bokmål <i18n-nb@lister.ping.uio.no>\n"
- msgstr ""
++"Language: nb\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
- #, fuzzy
- #| msgid "Important note for NIS/YP users!"
++msgstr "Den gamle datakatalogen vil bli lagret på ny plassering"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
++"En fil med navn /var/lib/mysql/debian-*.flag finnes på dette systemet. "
++"Nummeret indikerer en databaseversjon i binært format som ikke kan "
++"oppgraderes (eller nedgraderes) automatisk."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
++"Derfor vil den tidligere datakatalogen bli omdøpt til /var/lib/mysql-* og en "
++"ny datakatalog vil bli initialisert i /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
++"Eksporter/importer dataene dine manuelt (f.eks. med mysqldump) hvis "
++"nødvendig."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
- msgstr "Viktig merknad for NIS/YP-brukere!"
+msgid "Important note for NIS/YP users"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++msgstr "Viktig merknad for NIS/YP-brukere"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
++"Lokale systemkontoer opprettes av systemd-sysusers som redigerer /etc/"
++"passwd- og /etc/group-filene direkte, uten å bruke NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- msgstr ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"I NIS/YP-oppsett kan denne pakken opprette en lokal 'mysql'-bruker/gruppe "
++"under installasjon/oppgradering. Verifiser nsswitch.conf-oppsettet ditt og "
++"sørg for at det samsvarer med din lokale policy."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
++"Du bør også sjekke tillatelser og eierskap for katalogen /var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
- #, fuzzy
- #| msgid ""
- #| "The script is about to remove the data directory /var/lib/mysql. If it is "
- #| "planned to just install a higher MySQL version or if a different mysql-"
- #| "server package is already using it, the data should be kept."
++msgstr "Fjern alle MariaDB-databaser?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
++"Katalogen /var/lib/mysql som inneholder MariaDB-databasene er i ferd med å "
++"bli fjernet."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
- "Dette skriptet skal til å fjerne data-mappa /var/lib/mysql. Denne mappa bør "
- "beholdes hvis det bare skal installeres en høyere MariaDB-versjon, eller "
- "hvis en annen mariadb-server-pakke allerede bruker den."
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
++"Hvis du fjerner MariaDB-pakken for å senere installere en nyere versjon, "
++"eller hvis en annen mariadb-server-pakke allerede bruker den, bør dataene "
++"beholdes."
++
--- /dev/null
- # Dutch mariadb-10 po-debconf translation,
++# Dutch mariadb po-debconf translation,
+# Copyright (C) 2006 THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the mariadb package.
+# Vincent Zweije <zweije@xs4all.nl>, 2006.
+# Frans Spiesschaert <Frans.Spiesschaert@yucom.be>, 2014, 2016, 2018.
+#
+msgid ""
+msgstr ""
- "Project-Id-Version: mariadb-10.2.7-1\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2018-03-29 21:25+0200\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Frans Spiesschaert <Frans.Spiesschaert@yucom.be>\n"
+"Language-Team: Debian Dutch l10n Team <debian-l10n-dutch@lists.debian.org>\n"
+"Language: nl\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "De oude data-map zal op een nieuwe locatie bewaard worden"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Er bestaat op dit systeem een bestand met als naam /var/lib/mysql/debian-*."
+"flag. Het nummer duidt op een versie van het binair database-bestandsformaat "
+"dat niet automatisch opgewaardeerd (of gedegradeerd) kan worden."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"Daarom zal de vroegere data-map hernoemd worden naar /var/lib/mysql-* en zal "
+"er een nieuwe data-map geïnitialiseerd worden op /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Gelieve uw data zo nodig handmatig te exporteren/importeren (bijv. met "
+"mysqldump)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Belangrijke opmerking voor gebruikers van NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "Het gebruik van MariaDB onder NIS/YP vereist dat een mysql gebruikersaccount "
- "wordt toegevoegd aan het lokale systeem met:"
++"Lokale systeemaccounts worden aangemaakt door systemd-sysusers die de "
++"bestanden /etc/passwd en /etc/group direct bewerkt, zonder NIS/LDAP te "
++"gebruiken."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"Bij NIS/YP-instellingen kan dit pakket een lokale 'mysql'-gebruiker/groep "
++"aanmaken tijdens installatie/upgrade. Verifieer uw nsswitch.conf-"
++"instellingen en zorg ervoor dat deze overeenkomen met uw lokale beleid."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+"U moet ook controleren wie eigenaar is en wat de gebruikersrechten zijn van "
+"de map /var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Wilt u alle MariaDB-databases verwijderen?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"De map /var/lib/mysql die de MariaDB-databases bevat staat op het punt om "
+"verwijderd te worden."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Als u het MariaDB-pakket verwijdert om later een meer recente versie te "
+"installeren of als een ander mariadb-serverpakket het al gebruikt, zou de "
+"data behouden moeten worden."
++
--- /dev/null
- # Portuguese translation for mysql-dfsg-5.1's debconf messages
++# Portuguese translation for mariadb debconf messages
+# Copyright (C) 2006 Miguel Figueiredo <elmig@debianpt.org>
+# This file is distributed under the same license as the mariadb package.
+# Miguel Figueiredo <elmig@debianpt.org>, 2014
+# Rui Branco <ruipb@debianpt.org>, 2017.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2017-08-06 10:00+0100\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Rui Branco <ruipb@debianpt.org>\n"
+"Language-Team: Portuguese <traduz@debianpt.org>\n"
+"Language: pt\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "O antigo directório de data será guardado num novo local"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Já existe um ficheiro /var/lib/mysql/debian-*.flag no sistema. O número "
+"indica uma base de dados de formato binário que não pode ser actualizada "
+"automaticamente (ou baixar de versão)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"Assim o directório de dados anterior será renomeado para /var/lib/mysql-* e "
+"um novo directório de dados será inicializado em /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Por favor, se necessário, exporte/importe manualmente os seus dados (p.ex. "
+"com mysqldump)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Nota importante para os utilizadores de NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "Utilizar MariaDB com NIS/YP necessita de uma conta de utilizador de mysql "
- "para ser acrescentada ao sistema local com:"
++"Contas de sistema local são criadas pelo systemd-sysusers que edita os "
++"ficheiros /etc/passwd e /etc/group diretamente, sem usar NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"Em configurações NIS/YP, este pacote pode criar um utilizador/grupo 'mysql' "
++"local durante a instalação/actualização. Verifique a sua configuração "
++"nsswitch.conf e certifique-se de que corresponde à sua política local."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+"Deve também verificar as permissões e o dono do directório /var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Remover todas as bases de dados MariaDB?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"O directório /var/lib/mysql que contém as bases de dados MariaDB está "
+"prestes a ser removido."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Se está a remover o pacote MariaDB de forma a posteriormente instalar uma "
+"versão mais recente ou se um pacote mariadb-server já o está a utilizar, "
+"então os dados devem ser mantidos."
++
--- /dev/null
- # Adriano Rafael Gomes <adrianorg@arg.eti.br>, 2015-2016.
+# Debconf translations for mariadb.
+# This file is distributed under the same license as the mariadb package.
+# André Luís Lopes, <andrelop@debian.org>, 2005-2007.
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2016-04-30 16:16-0300\n"
- "Last-Translator: Adriano Rafael Gomes <adrianorg@arg.eti.br>\n"
++# Adriano Rafael Gomes <adrianorg@debian.org>, 2015-2023.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "número indicou uma versão de formato binário de banco de dados que não pode "
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
++"Last-Translator: Adriano Rafael Gomes <adrianorg@debian.org>\n"
+"Language-Team: Brazilian Portuguese <debian-l10n-portuguese@lists.debian."
+"org>\n"
+"Language: pt_BR\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "O diretório de dados antigo será salvo em novo local"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Um arquivo chamado /var/lib/mysql/debian-*.flag já existe nesse sistema. O "
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"número indica uma versão de formato binário de banco de dados que não pode "
+"ser atualizada (ou rebaixada) automaticamente."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"Portanto, o diretório de dados anterior será renomeado para /var/lib/mysql-* "
+"e um novo diretório de dados será inicializado em /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Por favor, exporte/importe manualmente seus dados (por exemplo, com "
+"mysqldump) se necessário."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Aviso importante para usuários NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Usar o MariaDB sob NIS/YP requer que uma conta de usuário mysql seja "
- "adicionada ao sistema local com:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Contas de sistema local são criadas pelo systemd-sysusers que edita os "
++"arquivos /etc/passwd e /etc/group diretamente, sem usar NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"Em configurações NIS/YP, este pacote pode criar um usuário/grupo 'mysql' "
++"local durante a instalação/atualização. Verifique sua configuração nsswitch."
++"conf e certifique-se de que corresponde à sua política local."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+"Você deverá também verificar as permissões e o dono do diretório /var/lib/"
+"mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Remover todas as bases de dados do MariaDB?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"O diretório /var/lib/mysql, o qual contém as bases de dados do MariaDB, está "
+"prestes a ser removido."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Caso você esteja removendo o pacote MariaDB para posteriormente instalar uma "
+"versão mais recente ou, caso uma versão diferente do pacote mariadb-server "
+"esteja sendo utilizada, os dados deverão ser mantidos."
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "Usar o MariaDB sob NIS/YP requer que uma conta de usuário mysql seja "
++#~ "adicionada ao sistema local com:"
--- /dev/null
- # Romanian translation of mysql-dfsg.
- # Copyright (C) 2006 THE mysql-dfsg'S COPYRIGHT HOLDER
- # This file is distributed under the same license as the mysql-dfsg package.
++# Romanian translation of mariadb.
++# Copyright © 2006, 2023 THE mariadb COPYRIGHT HOLDER
++# This file is distributed under the same license as the mariadb package.
+#
+# Stan Ioan-Eugen <stan.ieugen@gmail.com>, 2006.
++# Remus-Gabriel Chelu <remusgabriel.chelu@disroot.org>, 2023.
++#
+msgid ""
+msgstr ""
- "Project-Id-Version: po-debconf://mysql-dfsg\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2006-12-20 21:27+0200\n"
- "Last-Translator: stan ioan-eugen <stan.ieugen@gmail.com>\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
++"Last-Translator: Remus-Gabriel Chelu <remusgabriel.chelu@disroot.org>\n"
+"Language-Team: romanian <debian-l10n-romanian@lists.debian.org>\n"
- "Language: \n"
++"Language: ro\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
- "X-Generator: KBabel 1.11.4\n"
++"X-Generator: Poedit 3.2.2\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
- msgstr ""
++msgstr "Vechiul director de date va fi salvat în noua locație"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
++"Un fișier numit „/var/lib/mysql/debian-*.flag” există în acest sistem. "
++"Numărul indică o versiune în format binar al bazei de date care nu poate fi "
++"actualizată (sau retrogradată) automat."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
++"Prin urmare, directorul de date anterior va fi redenumit în „/var/lib/mysql-"
++"*” și un nou director de date va fi inițializat la „/var/lib/mysql”."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
++"Exportați/importați manual datele dumneavoastră (de exemplu, cu "
++"«mysqldump»), dacă este necesar."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
- #, fuzzy
- #| msgid "Important note for NIS/YP users!"
+msgid "Important note for NIS/YP users"
- msgstr "Notă importantă pentru utilizatorii NIS/YP!"
++msgstr "Notă importantă pentru utilizatorii NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
++"Conturile de sistem locale sunt create de systemd-sysusers care editează "
++"direct fișierele /etc/passwd și /etc/group, fără a utiliza NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
+msgstr ""
++"În configurațiile NIS/YP, acest pachet poate crea un utilizator/grup 'mysql' "
++"local în timpul instalării/actualizării. Verificați configurația dvs. "
++"nsswitch.conf și asigurați-vă că se potrivește cu politica dvs. locală."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr ""
++"Ar trebui să verificați, de asemenea, permisiunile și dreptul de proprietate "
++"asupra directorului „/var/lib/mysql”:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
- msgstr ""
++msgstr "Eliminați toate bazele de date MariaDB?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
++"Directorul „/var/lib/mysql” care conține bazele de date MariaDB este pe cale "
++"să fie eliminat."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
- #, fuzzy
- #| msgid ""
- #| "The script is about to remove the data directory /var/lib/mysql. If it is "
- #| "planned to just install a higher MySQL version or if a different mysql-"
- #| "server package is already using it, the data should be kept."
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
- "Scriptul urmează să şteargă directorul de date /var/lib/mysql. Dacă plănuiţi "
- "doar să instalaţi o versiune nouă MariaDB sau datele sunt folosite de către "
- "un alt pachet mariadb-server, atunci ar trebui păstraţi datele."
++"Dacă eliminați pachetul MariaDB pentru a instala ulterior o versiune mai "
++"recentă sau dacă un alt pachet mariadb-server îl folosește deja, datele ar "
++"trebui păstrate."
++
--- /dev/null
- "Project-Id-Version: mariadb 10.0.25-1\n"
+# translation of ru.po to Russian
+#
+# Ilgiz Kalmetev <translator@ilgiz.pp.ru>, 2003.
+# Yuriy Talakan' <yt@amur.elektra.ru>, 2005, 2006.
+# Yuriy Talakan' <yt@drsk.ru>, 2007.
+# Yuri Kozlov <yuray@komyakino.ru>, 2009, 2014, 2016.
+msgid ""
+msgstr ""
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2016-05-04 18:56+0300\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
- "%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Yuri Kozlov <yuray@komyakino.ru>\n"
+"Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n"
+"Language: ru\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Lokalize 1.5\n"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
++"n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "Каталог со старыми данными будет сохранён в новом месте"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"В системе найден файл /var/lib/mysql/debian-*.flag. Число представляет "
+"версию двоичного формата базы данных, которую невозможно обновить "
+"автоматически (или откатить к старой версии)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"В следствии этого, предыдущий каталог с данными будет переименован в /var/"
+"lib/mysql-*, а в /var/lib/mysql будет инициализирован каталог для новых "
+"данных."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Если нужно, выполните экспорт/импорт данных вручную (например, с помощью "
+"mysqldump)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Важное замечание для пользователей NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Использование MariaDB в NIS/YP требует добавления учётной записи mysql в "
- "локальную систему с:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"systemd-sysusers создает локальные системные учетные записи путем прямого "
++"редактирования /etc/passwd и /etc/group (он не создает пользователей в NIS/"
++"LDAP)"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"В конфигурациях NIS/YP этот пакет может создать локального пользователя/"
++"группу 'mysql' во время установки/обновления. Проверьте конфигурацию "
++"nsswitch.conf и убедитесь, что она соответствует вашей локальной политике."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr "Также проверьте права доступа и владельца каталога /var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Удалить все базы данных MariaDB?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"Запрос на удаление каталога /var/lib/mysql, содержащий базы данных MariaDB."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Если вы удаляете пакет MariaDB для установки более новой версии MariaDB, или "
+"есть другие пакеты mariadb-server, использующие этот каталог, то данные "
+"лучше сохранить."
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "Использование MariaDB в NIS/YP требует добавления учётной записи mysql в "
++#~ "локальную систему с:"
--- /dev/null
- "Project-Id-Version: mysql-dfsg-5.1 5.0.21-3\n"
+# Translation of mariadb debconf template to Swedish
+# Copyright (C) 2017 Martin Bagge <brother@bsnet.se>
+# This file is distributed under the same license as the mariadb package.
+#
+# Andreas Henriksson <andreas@fatal.se>, 2007
+# Martin Bagge <brother@bsnet.se>, 2009, 2015, 2017
+msgid ""
+msgstr ""
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2017-03-23 09:20+0100\n"
++"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Martin Bagge / brother <brother@bsnet.se>\n"
+"Language-Team: Swedish <debian-l10n-swedish@lists.debian.org>\n"
+"Language: sv\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Poedit 1.8.11\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "Den gamla data-katalogen kommer att sparas till en ny plats"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"En fil med namn på formatet /var/lib/mysql/debian-*.flag hittades i "
+"systemet. Siffran indikerar ett binärformat på databasen som inte kan "
+"uppgraderas (eller nedgraderas)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"Därför kommer den gamla data-katalogen att byta namn till /var/lib/mysql-* "
+"och en ny katalog kommer att initieras på /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Exportera/importera din data manuellt (exempelvis med mysqldump) om detta är "
+"nödvändigt."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Viktig information för NIS/YP-användare"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "För att kunna använda MariaDB under NIS/YP måste ett användarkonto för mysql "
- "läggas till i systemet."
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Lokala systemkonton skapas av systemd-sysusers som redigerar filerna /etc/"
++"passwd och /etc/group direkt, utan att använda NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"I NIS/YP-inställningar kan detta paket skapa en lokal 'mysql'-användare/"
++"grupp under installation/uppgradering. Verifiera din nsswitch.conf-"
++"inställning och se till att den matchar din lokala policy."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+"Du bör också kontrollera rättigheterna och ägaren av katalogen /var/lib/"
+"mysql."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Ta bort alla MariaDB-databaser?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"Katalogen /var/lib/mysql som innehåller MariaDB-databaser kommer att tas "
+"bort."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Om avinstallationen av MariaDB-paketet görs för att senare kunna installera "
+"en nyare version eller om en annan mariadb-server redan använder filerna ska "
+"de inte raderas."
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "För att kunna använda MariaDB under NIS/YP måste ett användarkonto för "
++#~ "mysql läggas till i systemet."
--- /dev/null
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2023-06-16 18:32-0400\n"
+# Translation of mariadb debconf templates to Swahili
+# Copyright (C) 2023, MariaDB authors.
+# This file is distributed under the same license as the mariadb packages.
+#
+# Translators:
+# Nicholas Othieno <nothieno@amazon.com>, 2023.
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Hivyo basi saraka la zamani la data litapewa jina jipya kuwa /var/lib/mysql-* "
- "na saraka jipya la data litaanzishwa kwenye /var/lib/mysql."
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Nicholas Othieno <nothieno@amazon.com>\n"
+"Language-Team: Swahili <(nothing)>\n"
+"Language: sw\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"debian.org>\n"
+"X-Generator: Poedit 3.2.2\n"
+"Plural-Forms: Plural-Forms: nplurals=2; plural=n>1;\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "Saraka la zamani la data itahifadhiwa kwenye eneo jipya"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Faili linaloitwa /var/lib/mysql/debian-*.flag lipo katika mfumo huu. Namba "
+"inaonyesha toleo la umbizo wa mfumo wa jozi la hifadhidata ambalo haliwezi "
+"kuboreshwa (au kushushwa) kiotomatiki."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
- "Tafadhali peleka/ingiza data yako kwa mkono (kwa mfano kwa kutumia mysqldump) ikiwa inahitajika."
++"Hivyo basi saraka la zamani la data litapewa jina jipya kuwa /var/lib/mysql-"
++"* na saraka jipya la data litaanzishwa kwenye /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"Tafadhali peleka/ingiza data yako kwa mkono (kwa mfano kwa kutumia "
++"mysqldump) ikiwa inahitajika."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Ujumbe muhimu kwa watumiaji wa NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Kutumia MariaDB chini ya NIS/YP inahitaji akaunti ya mtumiaji wa mysql kuongezwa "
- "katika mfumo wa ndani na:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Akaunti za mfumo wa ndani huanzishwa na systemd-sysusers ambayo huhariri "
++"faili za /etc/passwd na /etc/group moja kwa moja, bila kutumia NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Unapaswa pia kukagua ruhusa na umiliki wa saraka la /var/lib/mysql:"
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
+msgstr ""
- "inapaswa kuwekwa."
++"Katika usanidi wa NIS/YP, paketi hii inaweza kuunda mtumiaji/kikundi cha "
++"'mysql' cha ndani wakati wa usakinishaji/kuboresha. Tafadhali thibitisha "
++"usanidi wako wa nsswitch.conf na uhakikishe unaendana na sera yako ya ndani."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr "Unapaswa pia kukagua ruhusa na umiliki wa saraka la /var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Ondoa hifadhidata zote za MariaDB?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"Eneo la /var/lib/mysql ambalo lina hifadhidata za MariaDB linakaribia "
+"kuondolewa."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Ikiwa unatoa kifurushi cha MariaDB ili kusakinisha toleo jipya zaidi baadaye "
+"au ikiwa kifurushi tofauti cha mariadb-server tayari inaitumia data, data "
++"inapaswa kuwekwa."
--- /dev/null
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the mariadb package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
--- /dev/null
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2017-03-16 13:16+0300\n"
+# Turkish translation of mariadb-server.
+# This file is distributed under the same license as the mariadb-server package.
+# Gürkan Aslan <gurkan@iaslan.com>, 2004
+# Atila KOÇ <koc@artielektronik.com.tr>, 2015, 2017
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Atila KOÇ <koc@artielektronik.com.tr>\n"
+"Language-Team: Turkish <debian-l10n-turkish@lists.debian.org>\n"
+"Language: tr\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Poedit 1.8.7.1\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "Eski veritabanı dizini yeni konumuna kaydedilecektir"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Bu sistemde /var/lib/mysql/debian-*.flag adlı bir dosya bulunmaktadır. "
+"Belirtilen numara kendiliğinden yükseltilemeyecek ya da alçaltılamayacak bir "
+"ikilik veritabanı biçimini işaret etmektedir."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"Önceki veri dizini /var/lib/mysql-* olarak yeniden adlandırılacak ve yeni "
+"veri dizini /var/lib/mysql konumunda hazırlanacaktır."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr "Gerektiğinde verinizi elle (ör. mysqldump ile) içe/dışa aktarın."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "NIS/YP kullanıcıları için önemli not"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "MariaDB'nin NIS/YP ile kullanılması için yerel sisteme aşağıdaki komut "
- "çalıştırılarak mysql kullanıcı hesabının eklenmesi gereklidir:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"systemd-sysusers, /etc/passwd ve /etc/group dosyalarını doğrudan "
++"düzenleyerek yerel sistem hesapları oluşturur (NIS/LDAP'da kullanıcı "
++"oluşturmaz)"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"NIS/YP kurulumlarında bu paket, kurulum/güncelleme sırasında yerel bir "
++"'mysql' kullanıcısı/grubu oluşturabilir. Lütfen nsswitch.conf kurulumunuzu "
++"doğrulayın ve bunun yerel politikanızla eşleştiğinden emin olun."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+"/var/lib/mysql dizininin sahiplik ve izin ayarlarını da gözden "
+"geçirmelisiniz:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Tüm MariaDB veritabanları kaldırılsın mı?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"MariaDB veritabanlarını barındıran /var/lib/mysql dizini kaldırılmak üzere"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Eğer MariaDB paketini daha sonra güncel bir sürümünü kurmak üzere "
+"kaldırıyorsanız ya da veritabanlarınıza başka bir mariadb-server paketi ile "
+"erişiyorsanız, veritabanlarınızı kaldırmamalısınız."
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "MariaDB'nin NIS/YP ile kullanılması için yerel sisteme aşağıdaki komut "
++#~ "çalıştırılarak mysql kullanıcı hesabının eklenmesi gereklidir:"
--- /dev/null
- "POT-Creation-Date: 2019-07-23 19:16-0300\n"
- "PO-Revision-Date: 2017-03-18 13:32+0700\n"
+# Vietnamese translations for mariadb package
+# Bản dịch Tiếng Việt dành cho gói mariadb.
+# This file is distributed under the same license as the mariadb package.
+# Trần Ngọc Quân <vnwildman@gmail.com>, 2017.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: mariadb\n"
+"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
- "Using MariaDB under NIS/YP requires a mysql user account to be added on the "
- "local system with:"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
+"Last-Translator: Trần Ngọc Quân <vnwildman@gmail.com>\n"
+"Language-Team: Vietnamese <debian-l10n-vietnamese@lists.debian.org>\n"
+"Language: vi\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Gtranslator 2.91.7\n"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid "The old data directory will be saved at new location"
+msgstr "Thư mục dữ liệu cũ sẽ được lưu tại vị trí mới"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
+"indicates a database binary format version that cannot automatically be "
+"upgraded (or downgraded)."
+msgstr ""
+"Một tập tin có tên /var/lib/mysql/debian-*.flag đã sẵn có trên hệ thống này. "
+"Con số chỉ ra rằng một phiên bản định dạng cơ sở dữ liệu không thể tự động "
+"nâng cấp (hoặc hạ cấp)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
+"and a new data directory will be initialized at /var/lib/mysql."
+msgstr ""
+"Do đó thư mục dữ liệu trước đây sẽ được đổi tên thành /var/lib/mysql-* và "
+"thư mục dữ liệu mới sẽ được khởi tạo tại /var/lib/mysql."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:2001
+msgid ""
+"Please manually export/import your data (e.g. with mysqldump) if needed."
+msgstr ""
+"Vui lòng xuất/nhập dữ liệu của bạn bằng tay nếu thấy cần (ví dụ bằng "
+"mysqldump)."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid "Important note for NIS/YP users"
+msgstr "Chú ý quan trọng cho người dùng NIS/YP"
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
- "Dùng MariaDB dưới NIS/YP cần một tài khoản người dùng được thêm vào một hệ "
- "thống nội bộ với:"
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
+msgstr ""
- "You should also check the permissions and ownership of the /var/lib/mysql "
- "directory:"
++"Các tài khoản hệ thống cục bộ được tạo bởi systemd-sysusers, nó chỉnh sửa "
++"trực tiếp các tập tin /etc/passwd và /etc/group, không sử dụng NIS/LDAP."
+
+#. Type: note
+#. Description
+#: ../mariadb-server.templates:3001
+msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"Trong các cài đặt NIS/YP, gói này có thể tạo một nhóm/người dùng 'mysql' cục "
++"bộ trong quá trình cài đặt/nâng cấp. Vui lòng kiểm tra cài đặt nsswitch.conf "
++"của bạn và đảm bảo điều này phù hợp với chính sách cục bộ của bạn."
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
+msgstr ""
+"Bạn cũng nên kiểm tra phân quyền và chủ sở hữu của thư mục /var/lib/mysql:"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid "Remove all MariaDB databases?"
+msgstr "Xóa bỏ mọi cơ sở dữ liệu MariaDB chứ?"
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"The /var/lib/mysql directory which contains the MariaDB databases is about "
+"to be removed."
+msgstr ""
+"Thư mục /var/lib/mysql nơi mà chứa các cơ sở dữ liệu MariaDB chuẩn bị bị xóa "
+"bỏ."
+
+#. Type: boolean
+#. Description
+#: ../mariadb-server.templates:4001
+msgid ""
+"If you're removing the MariaDB package in order to later install a more "
+"recent version or if a different mariadb-server package is already using it, "
+"the data should be kept."
+msgstr ""
+"Nếu bạn gỡ bỏ gói cốt để mà sau này cài đặt gói máy phục vụ phiên bản gần "
+"đây hoặc là một gói mariadb-server khác đang được dùng, dữ liệu nên được giữ "
+"lại."
++
++#~ msgid ""
++#~ "Using MariaDB under NIS/YP requires a mysql user account to be added on "
++#~ "the local system with:"
++#~ msgstr ""
++#~ "Dùng MariaDB dưới NIS/YP cần một tài khoản người dùng được thêm vào một "
++#~ "hệ thống nội bộ với:"
--- /dev/null
--- /dev/null
++# Simplified Chinese translation of mariadb-server
++# This file is distributed under the same license as the mariadb package.
++# Tianyu Chen <billchenchina2001@gmail.com>, 2023.
++#
++msgid ""
++msgstr ""
++"Project-Id-Version: mariadb\n"
++"Report-Msgid-Bugs-To: mariadb@packages.debian.org\n"
++"POT-Creation-Date: 2026-01-13 13:13-0000\n"
++"PO-Revision-Date: 2026-01-13 13:13-0000\n"
++"Last-Translator: Tianyu Chen <billchenchina2001@gmail.com>\n"
++"Language-Team: \n"
++"Language: zh_CN\n"
++"MIME-Version: 1.0\n"
++"Content-Type: text/plain; charset=UTF-8\n"
++"Content-Transfer-Encoding: 8bit\n"
++"Plural-Forms: nplurals=1; plural=0;\n"
++"X-Generator: Poedit 3.2.2\n"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid "The old data directory will be saved at new location"
++msgstr "旧的数据目录将被保存在新位置"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid ""
++"A file named /var/lib/mysql/debian-*.flag exists on this system. The number "
++"indicates a database binary format version that cannot automatically be "
++"upgraded (or downgraded)."
++msgstr ""
++"系统中存在名为 /var/lib/mysql/debian-*.flag 的文件。这个数字说明系统中存在一"
++"个对应版本的数据库无法自动升级（或降级）。"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid ""
++"Therefore the previous data directory will be renamed to /var/lib/mysql-* "
++"and a new data directory will be initialized at /var/lib/mysql."
++msgstr ""
++"因此之前的数据目录将被重命名至 /var/lib/mysql-*，新的数据目录将被初始化为 /"
++"var/lib/mysql。"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:2001
++msgid ""
++"Please manually export/import your data (e.g. with mysqldump) if needed."
++msgstr "如必要，请手动导出/导入你的数据。（如，使用 mysqldump）"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "Important note for NIS/YP users"
++msgstr "对 NIS/YP 用户的重要提示"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid ""
++"Local system accounts are created by systemd-sysusers which edits the /etc/"
++"passwd and /etc/group files directly, without using NIS/LDAP."
++msgstr ""
++"systemd-sysusers 通过直接编辑 /etc/passwd 和 /etc/group 来创建本地系统账户"
++"（它不会在 NIS/LDAP 中创建用户）"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid ""
++"On NIS/YP setups this package may create a local 'mysql' user/group during "
++"installation/upgrade. Please verify your nsswitch.conf setup and ensure this "
++"matches your local policy."
++msgstr ""
++"在 NIS/YP 环境中，此软件包可能在安装/升级期间创建本地 'mysql' 用户/组。请验证"
++"您的 nsswitch.conf 配置并确保其符合您的本地策略。"
++
++#. Type: note
++#. Description
++#: ../mariadb-server.templates:3001
++msgid "You should also check the permissions and ownership of /var/lib/mysql:"
++msgstr "你还需要检查 /var/lib/mysql 目录的权限和所有权："
++
++#. Type: boolean
++#. Description
++#: ../mariadb-server.templates:4001
++msgid "Remove all MariaDB databases?"
++msgstr "移除全部 MariaDB 数据库？"
++
++#. Type: boolean
++#. Description
++#: ../mariadb-server.templates:4001
++msgid ""
++"The /var/lib/mysql directory which contains the MariaDB databases is about "
++"to be removed."
++msgstr "包含 MariaDB 数据库的目录 /var/lib/mysql 将被删除。"
++
++#. Type: boolean
++#. Description
++#: ../mariadb-server.templates:4001
++msgid ""
++"If you're removing the MariaDB package in order to later install a more "
++"recent version or if a different mariadb-server package is already using it, "
++"the data should be kept."
++msgstr ""
++"如果您是为了安装新版本而卸载 MariaDB 包，或正在使用另一个 mariadb-server 包，"
++"您应该保留数据。"
++
--- /dev/null
- DEB_VERSION_REVISION := $(shell echo $(DEB_VERSION) | sed -e 's/.*[~-]\(.*\)/\1/')
+#!/usr/bin/make -f
+
+# Enable Debian Hardening
+# https://wiki.debian.org/Hardening
+export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+
+# LTO is generally enabled. Only ColumnStore doesn't support it (MCOL-5819)
+# and disables it in storage/columnstore/CMakeLists.txt
+
+DPKG_EXPORT_BUILDFLAGS = 1
+# Include all defaults, including buildflags.mk
+include /usr/share/dpkg/default.mk
+# Include package notes in built executables
+include /usr/share/debhelper/dh_package_notes/package-notes.mk
+
+# CPPFLAGS are nor read by CMake, so copy them to CXXFLAGS
+# See why at https://cmake.org/Bug/view.php?id=12928
+# This is needed for e.g. all automatic Debian hardening flags to apply on all cmake builds.
+CFLAGS+=$(CPPFLAGS)
+CXXFLAGS+=$(CPPFLAGS)
+
+# Only do a strict symbol checking on Linux
+# https://manpages.debian.org/testing/dpkg-dev/dpkg-gensymbols.1.en.html
+# Level 4: Fails if some libraries have been introduced.
+ifneq (,$(filter linux,$(DEB_HOST_ARCH_OS)))
+ export DPKG_GENSYMBOLS_CHECK_LEVEL = 4
+endif
+
+BUILDDIR := builddir
- dh_testroot
- rm -rf $(BUILDDIR) builddir-native mysql-test/unstable-tests
- debconf-updatepo # Update po-files when clean runs before each build
++DEB_VERSION_REVISION := $(shell echo $(DEB_VERSION) | sed -e 's/^.*-//')
+DEB_VERSION_VERSION := $(shell echo $(DEB_VERSION) | sed -e 's/^.*:\(.*\)\(-\|+\).*/\1/')
+DEB_VERSION_MAJOR := $(shell echo $(DEB_VERSION_VERSION) | sed -e 's/^\(.*\)\..*$$/\1/')
+RELEASE := $(shell lsb_release -r -s) # Use changelog based DEB_DISTRIBUTION instead?
+TMP := $(CURDIR)/debian/tmp
+MTR_SKIP_TEST_LIST := $(shell mktemp)
+
+# According to Debian Policy version 4.2.0 builds should be as verbose as
+# possible unless 'terse' is specifically passed.
+ifeq (,$(filter terse,$(DEB_BUILD_OPTIONS)))
+ export DH_VERBOSE=1
+endif
+
+# Parallel build support as advised
+# at https://www.debian.org/doc/debian-policy/ch-source.html#s-debianrules-options
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ MAKEFLAGS += -j$(NUMJOBS)
+else
+ # NUMJOBS cannot be empty as it is used as a parameter to mtr, default to 'auto'.
+ NUMJOBS = auto
+endif
+
+# RocksDB cannot build on 32-bit platforms
+ifeq (32,$(DEB_HOST_ARCH_BITS))
+ CMAKEFLAGS += -DPLUGIN_ROCKSDB=NO
+endif
+
++# Fix compilation errors like "relocation truncated to fit: GPREL16 against symbol `wsrep_debug'"
++ifeq ($(DEB_HOST_ARCH),alpha)
++ export DEB_LDFLAGS_MAINT_APPEND += -Wl,--no-relax
++endif
++
+# Add support for verbose builds
+MAKEFLAGS += VERBOSE=1
+
+override_dh_auto_clean:
+ @echo "RULES.$@"
+ dh_testdir
- # Don't build ColumnStore as part of the native build as it does not meet the
- # quality standards in Debian. Also building it requires an extra 4 GB of disk
- # space which makes native Debian builds fail as the total disk space needed
- # for MariaDB becomes over 10 GB. Only build CS via autobake-deb.sh.
++ # Delete obsolete/unstable components and embedded source code copies
++ # to ensure they are not used in Debian and in general to keep MariaDB binaries
++ # secure and using only system libraries that can be updated quickly and easily
++ # in case security vulnerabilities are found in any of the libraries
++ rm -rf $(BUILDDIR) builddir-native extra/readline extra/wolfssl zlib libmariadb/external/zlib
++ # Remove columnstore as the source code is dirty and software not mature enough for Debian anyway
++ rm -rf storage/columnstore
++
++ # Update po-files when clean runs before each build
++ debconf-updatepo
++
++ # Clean up files created by custom sections in build that 'dh clean' does not see automatically
++ rm -rf debian/mariadb-server.*.socket debian/substvars
+
+override_dh_auto_configure:
+ @echo "RULES.$@"
+ dh_testdir
+
+ifneq ($(DEB_BUILD_ARCH),$(DEB_HOST_ARCH))
+ dpkg-architecture -a$(DEB_BUILD_ARCH) -f -c dh_auto_configure --builddirectory=builddir-native --reload-all-buildenv-variables
+ dh_auto_build --builddirectory=builddir-native -- import_executables
+endif
+
+ echo "server:Version=$(DEB_VERSION)" >> debian/substvars
+
+ # As packages does not have major version any more in package name there is no
+ # way as it not set by dpkg to use this on postinst script. Use sed to
+ # determine major version instead.
+ # @TODO: Rewrite this to use the new upstream /var/lib/mysql_upgrade_info file
+ # instead of the legacy /var/lib/debian-XX.X.flag file
+ sed -i 's/__MARIADB_MAJOR_VER__/$(DEB_VERSION_MAJOR)/g' debian/mariadb-server.post* debian/mariadb-server.preinst
+
- -DCOMPILATION_COMMENT="mariadb.org binary distribution" \
- -DMYSQL_SERVER_SUFFIX="-$(DEB_VERSION_REVISION)" \
++ # Don't build ColumnStore, not mature enough for Debian yet.
+ PATH=$${MYSQL_BUILD_PATH:-"/usr/lib/ccache:/usr/local/bin:/usr/bin:/bin"} \
+ dh_auto_configure --builddirectory=$(BUILDDIR) -- \
+ -DCMAKE_BUILD_TYPE=RelWithDebInfo \
+ $(CMAKEFLAGS) \
+ $(if $(filter $(DEB_BUILD_ARCH),$(DEB_HOST_ARCH)),,-DIMPORT_EXECUTABLES=$(CURDIR)/builddir-native/import_executables.cmake) \
- cd $(BUILDDIR) && $(MAKE) --output-sync=target
++ -DCOMPILATION_COMMENT="-- Please help get to 10k stars at https://github.com/MariaDB/Server" \
++ -DMYSQL_SERVER_SUFFIX="-$(DEB_VERSION_REVISION) from $(DEB_VENDOR)" \
+ -DSYSTEM_TYPE="debian-$(DEB_HOST_GNU_SYSTEM)" \
+ -DBUILD_CONFIG=mysql_release \
+ -DCONC_DEFAULT_CHARSET=utf8mb4 \
+ -DPLUGIN_AWS_KEY_MANAGEMENT=NO \
+ -DPLUGIN_COLUMNSTORE=NO \
++ -DWITH_NUMA=AUTO \
+ -DIGNORE_AIO_CHECK=ON \
+ -DWITH_URING=ON \
+ -DWITH_LIBAIO=ON \
++ -DWITH_INNODB_SNAPPY=ON \
++ -DHAVE_SYSTEM_LIBFMT_EXITCODE=0 \
++ -DWITH_SBOM=NO \
+ -DDEB=$(DEB_VENDOR)
+
+# This is needed, otherwise 'make test' will run before binaries have been built
+override_dh_auto_build:
+ @echo "RULES.$@"
+ # Print build env info to help debug builds on different platforms
+ dpkg-architecture
- --verbose-restart --max-save-core=1 --max-save-datadir=1 \
++ cd $(BUILDDIR) && $(MAKE)
+
++# Note that the 'nocheck' condition inside this section may potentially be
++# completely obsolete, as at least the Launchpad riscv64 builder completely
++# skips this section with message:
++# dh: command-omitted: The call to "debian/rules override_dh_auto_test" was
++# omitted due to "DEB_BUILD_OPTIONS=nocheck"
+override_dh_auto_test:
+ @echo "RULES.$@"
+ dh_testdir
+ # Skip running test suite after build if DEB_BUILD_OPTIONS contains 'nocheck'
+ @echo "DEB_BUILD_OPTIONS: $(DEB_BUILD_OPTIONS)"
+ifeq (,$(filter nocheck,$(DEB_BUILD_OPTIONS)))
+ # Skip unstable tests if such are defined for arch
+ [ ! -f debian/unstable-tests.$(DEB_HOST_ARCH) ] || cat debian/unstable-tests.$(DEB_HOST_ARCH) >> $(MTR_SKIP_TEST_LIST)
+ # Show contents of skip list on this architecture
+ @echo "On architecture $(DEB_HOST_ARCH) skip tests:"
+ cat $(MTR_SKIP_TEST_LIST)
+ # Run testsuite
+ cd $(BUILDDIR)/mysql-test && \
+ export MTR_PRINT_CORE=detailed && \
+ ./mtr --force --testcase-timeout=120 --suite-timeout=540 --retry=3 \
- --skip-test-list=$(MTR_SKIP_TEST_LIST)
++ --max-test-fail=30 --max-save-core=1 --max-save-datadir=1 \
+ --parallel=$(NUMJOBS) --skip-rpl --suite=main \
- # Rename and install AppArmor profile
- install -D -m 644 debian/apparmor-profile $(TMP)/etc/apparmor.d/usr.sbin.mariadbd
++ --skip-test-list=$(MTR_SKIP_TEST_LIST) \
++ $(MTR_ARGUMENTS_APPEND)
+ # Don't use --mem here as official Debian builders and most Docker systems don't have a large mem device available and
+ # would fail with errors on lack of disk space.
+endif
+
+override_dh_auto_install:
+ @echo "RULES.$@"
+ dh_testdir
+ dh_testroot
+
+ # Run 'make install' without output since it is uninteresting and
+ # silencing it helps to make overall build log shorter and more readable
+ @echo "Running $(MAKE) install DESTDIR=$(TMP) ..."
+ cd $(BUILDDIR) && $(MAKE) install DESTDIR=$(TMP) > /dev/null
+
+ # If mariadb-test package is removed, also remove most of it's files
+ grep --quiet "Package: mariadb-test" debian/control || rm -rf $(TMP)/usr/share/mariadb/mariadb-test
+
++ # Delete private files from libraries so they don't get shipped in the -dev packages
++ rm -r $(TMP)/usr/include/mariadb/server/private
++
+ # Don't ship sql-bench at all, just delete it completely even though it builds
+ rm -r $(TMP)/usr/sql-bench
+
+ # nm numeric soft is not enough, therefore extra sort in command
+ # to satisfy Debian reproducible build requirements
+ mkdir -p $(TMP)/usr/share/doc/mariadb-server
+ nm --defined-only $(BUILDDIR)/sql/mariadbd | LC_ALL=C sort | gzip -n -9 > $(TMP)/usr/share/doc/mariadb-server/mariadbd.sym.gz
+
- ln -s libmariadb.so.3 $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/libmariadbclient.so.18
-
- # Install libmysqlclientclientXX compatibility links
- ln -s libmariadb.so.3 $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/libmysqlclient.so.18
- ln -s libmariadb.so.3 $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/libmysqlclient.so.19
- ln -s libmariadb.so.3 $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/libmysqlclient.so.20
++ # Rename mariadb.pc as mariadb-embedded-server.pc as to be more descriptive
++ mv -v $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/pkgconfig/mariadb.pc $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/pkgconfig/mariadb-embedded-server.pc
++ # Keep libmariadbd.pc around for backwards compatibility as all Debian users
++ # have had it for embedded server since April 2021
++ ln -sf mariadb-embedded-server.pc $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/pkgconfig/libmariadbd.pc
++
++ # Rename libmariadb.pc as mariadb.pc as it better fits the client library,
++ # and keep old libmariadb.pc as symlink for backwards compatibility
++ mv -v $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/pkgconfig/libmariadb.pc $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/pkgconfig/mariadb.pc
++ ln -sf mariadb.pc $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/pkgconfig/libmariadb.pc
+
+ # Install libmariadbclient18 compatibility links
+ ln -s libmariadb.so.3 $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/libmariadbclient.so
- # Start mariadbd at sequence number 19 before 20 where apache, proftpd etc gets
- # started which might depend on a running database server.
- override_dh_installinit-arch:
- dh_installinit --name=mariadb -- defaults 19 21
+
+ # Install libmariadbclient.a compatibility link
+ ln -s libmariadb.a $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/libmariadbclient.a
+
+ # Symlink plugins that are used by both server and client and thus need to
+ # load from the libmariadb path as well
+ ln -s ../../../mysql/plugin/auth_test_plugin.so $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/libmariadb3/plugin/auth_test_plugin.so
+ ln -s ../../../mysql/plugin/qa_auth_interface.so $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/libmariadb3/plugin/qa_auth_interface.so
+ ln -s ../../../mysql/plugin/test_sql_service.so $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/libmariadb3/plugin/test_sql_service.so
+ # Move test plugins that are only needed by the client to the libmariadb path
+ mv -v $(TMP)/usr/lib/mysql/plugin/qa_auth_client.so $(TMP)/usr/lib/$(DEB_HOST_MULTIARCH)/libmariadb3/plugin/
+
++ # dh_strip skips libmariadbd.a in MariaDB 11.8 for an unknown reason, so strip
++ # it manually to keep total artifact size under 250 MB
++ strip --strip-debug --remove-section=.comment --remove-section=.note --enable-deterministic-archives -R .gnu.lto_\* \
++ -R .gnu.debuglto_\* -N __gnu_lto_slim -N __gnu_lto_v1 debian/tmp/usr/lib/*/libmariadbd.a
++
++ # Install apparmor profile inside override_dh_install as recommended in dh_apparmor(1)
++ dh_apparmor -pmariadb-server --profile-name=mariadbd
++
++# Define name used for service, and install mariadb.service on Linux only
+override_dh_installsystemd:
++ifneq (,$(filter linux,$(DEB_HOST_ARCH_OS)))
+ dh_installsystemd -pmariadb-server mariadb.service
++endif
++
++# Change dh_missing from fail to list on non-Linux
++override_dh_missing:
++ dh_missing $(if $(filter linux,$(DEB_HOST_ARCH_OS)),,--list-missing)
+
- dh $@ --parallel --fail-missing
++override_dh_installinit:
++ dh_installinit --name=mariadb
+
+# Use custom server version string variable
+override_dh_gencontrol:
+ dh_gencontrol -- -Tdebian/substvars
+
+# If a file is not supposed to be included anywhere, add it to the not-installed
+# file and document the reason. Note that dh_install supports the above mentioned
+# white list file only starting from Debian Stretch and Ubuntu Xenial.
+# To find more, grep build logs for 'but is not installed to anywhere'.
+%:
++ dh $@
+
+# vim: ts=8
--- /dev/null
- # Include Salsa-CI as a base
+---
- - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/salsa-ci.yml
- - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/pipeline-jobs.yml
++# Include Salsa CI as a base
+include:
- # Override Salsa-CI with MariaDB specific variations
++ - https://salsa.debian.org/salsa-ci-team/pipeline/raw/master/recipes/debian.yml
+
- RELEASE: sid
++# Override Salsa CI defaults with MariaDB specific variations
+variables:
+ BUILT_PACKAGES: "libmariadb-dev libmariadb-dev-compat libmariadb3
+ libmariadbd19t64 libmariadbd-dev mariadb-common mariadb-client-core
+ mariadb-client mariadb-server-core mariadb-server mariadb-backup
+ mariadb-plugin-connect mariadb-plugin-s3 mariadb-plugin-rocksdb
+ mariadb-plugin-oqgraph mariadb-plugin-mroonga mariadb-plugin-spider
+ mariadb-plugin-gssapi-server mariadb-plugin-gssapi-client
+ mariadb-plugin-cracklib-password-check mariadb-plugin-hashicorp-key-management
+ mariadb-plugin-provider-bzip2 mariadb-plugin-provider-lz4
+ mariadb-plugin-provider-lzma mariadb-plugin-provider-lzo
+ mariadb-plugin-provider-snappy mariadb-test mariadb-test-data"
+ DEB_BUILD_OPTIONS: "nocheck noautodbgsym"
- SALSA_CI_DISABLE_MISSING_BREAKS: 0
- SALSA_CI_DISABLE_RC_BUGS: 1
- SALSA_CI_DISABLE_BUILD_PACKAGE_ALL: 1
- SALSA_CI_DISABLE_BUILD_PACKAGE_ANY: 1
- GIT_SUBMODULE_STRATEGY: recursive
- SALSA_CI_GBP_BUILDPACKAGE_ARGS: "--git-submodules" # did not apply to extract-sources
++ # The jobs build-package-any nd build-package-all work, but they can take 2h+
++ # for MariaDB and provide little value as changes to debian/control
++ # `Architecture` and `Multi-Arch` stanzas are rare.
++ SALSA_CI_DISABLE_BUILD_PACKAGE_ALL: 1
++ SALSA_CI_DISABLE_BUILD_PACKAGE_ANY: 1
+ # Reprotest works, but takes very long time and often fails due to timeouts.
+ # Thus is best kept disabled and only occasionally manually enabled to
+ # test that reproducibility works, along with atomic reprotest to directly
+ # pinpoint what aspect of the build is broken if not reproducible.
+ SALSA_CI_DISABLE_REPROTEST: 1
+ SALSA_CI_ENABLE_ATOMIC_REPROTEST: 0
- # Extend Salsa-CI build jobs to have longer timeout as the default GitLab
- # timeout (1h) is often not enough
++ # Debrebuild works, but it too takes very long time and timeouts, so better to
++ # have it disabled by default and only run occasionally when specifically
++ # debugging reproducibility issues.
++ SALSA_CI_DISABLE_DEBREBUILD: 1
++ SALSA_CI_DISABLE_RC_BUGS: 0
++ # Testing https://salsa.debian.org/salsa-ci-team/pipeline#git-attributes
++ SALSA_CI_DISABLE_GBP_SETUP_GITATTRIBUTES: 1
+
- - test
+.build-package:
++ # Extend Salsa-CI build jobs to have longer timeout as the default GitLab
++ # timeout (1h) is often not enough
+ timeout: 3h
+
+stages:
+ - provisioning
+ - build
- - publish # Stage referenced by Salsa-CI template aptly stanza, so must exist even though not used
-
-
- build autobake:
- extends: .build-package
- stage: build
- script: &autobake-deb-steps
- # Run Salsa-CI .build-before-script equivalent
- - mkdir -p ${WORKING_DIR} ${CCACHE_WORK_DIR}
- - mv ${CCACHE_WORK_DIR} ${CCACHE_TMP_DIR}
- # Run Salsa-CI .build-script equivalent, with extra devscripts so autobake-deb.sh can run 'dch'
- - export CCACHE_DIR=${CCACHE_TMP_DIR}
- - apt-get update && eatmydata apt-get install --no-install-recommends -y ccache fakeroot build-essential devscripts lsb-release
- - cd ${WORKING_DIR}/${SOURCE_DIR}
- - eatmydata apt-get build-dep --no-install-recommends -y .
- - update-ccache-symlinks; ccache -z # Zero out ccache counters
- - while true; do sleep 600; echo "10 minutes passed" >&2; done & # Progress keeper since build is long and silent
- - debian/autobake-deb.sh |& tail -n 10000 # Keep Gitlab-CI output under 4 MB
- - cd ${WORKING_DIR}
- - rm -rf ${WORKING_DIR}/${SOURCE_DIR}
- - du -shc ${WORKING_DIR}/* # Show total file size of artifacts. Must stay are under 100 MB.
- - ccache -s # Show ccache stats to validate it worked
- - mv ${CCACHE_TMP_DIR} ${CCACHE_WORK_DIR}
-
- # Buster only has libfmt 6.1 but 7.0 is required, so backport build for Buster
- # is not possible unless somebody packages libfmt7-dev for Buster.
++ - test # Stage referenced by Salsa CI template reprotest stanza, so must exist
+ - upgrade MariaDB
+ - upgrade MariaDB and distro
+ - upgrade MariaDB variant
+ - test extras
- cd ${WORKING_DIR} # Don't repeat this step, it's just cd ./debian/output
++ - publish # Stage referenced by Salsa CI template aptly stanza, so must exist even though not used
++
++packaging-fix-checks:
++ stage: provisioning
++ image: debian:sid-slim
++ script:
++ - apt-get update -qq && apt-get -qq install --no-install-recommends --yes git devscripts python3-debian shellcheck make lsb-release dh-debputy python3-pygls
++ # Check debian/* for typical errors. Don't check spelling as there are too
++ # many false positives and anyway spelling issues are level 'pedantic' in
++ # Debputy and do not emit an exit code, so wouldn't show up as failure in CI
++ # anyway.
++ - debputy lint
++ - |
++ if [ "$(find debian/patches/ -type f -not -name series | wc -l)" -eq "$(cat debian/patches/series | wc -l)" ]
++ then
++ echo "The directory debian/patches/ contents and debian/patches/series file match by count."
++ else
++ find debian/patches -type f -not -name series -printf "%P\n" | sort > /tmp/patches-directory-sorted
++ sort debian/patches/series > /tmp/patches-series-sorted
++ diff -y /tmp/patches-series-sorted /tmp/patches-directory-sorted
++ echo
++ echo "The directory debian/patches/ file count does not match that in debian/series. Check that there are no unaccounted patches!"
++ exit 1
++ fi
++ - |
++ wrap-and-sort -ast
++ if [ "$(git diff --name-only | wc -l)" -eq 0 ]
++ then
++ echo "No uncommitted changes after 'wrap-and-sort -ast', maintainer has done good job keeping files in order."
++ else
++ git diff
++ echo
++ echo "Debian packaging files are unordered! Please run 'wrap-and-sort -vast'."
++ exit 1
++ fi
++ - |
++ shellcheck -x --shell=sh $(grep -Irnw debian/ -e '^#!.*/sh' | sort -u |cut -d ':' -f 1 | xargs)
++ shellcheck -x --shell=bash $(grep -Irnw debian/ -e '^#!.*/bash' | sort -u |cut -d ':' -f 1 | xargs)
++ rules:
++ # Do not create a pipeline for tags unless SALSA_CI_ENABLE_PIPELINE_ON_TAGS is set
++ - if: $CI_COMMIT_TAG != null && $SALSA_CI_ENABLE_PIPELINE_ON_TAGS !~ /^(1|yes|true)$/
++ when: never
++ - when: always
++
++# Bookworm and Bullseye backports can be enabled if
++# https://salsa.debian.org/mariadb-team/mariadb-server/-/merge_requests/67 is
++# reverted.
+
+autopkgtest:
+ extends: .test-autopkgtest
+ artifacts:
+ reports:
+ junit: ${WORKING_DIR}/debci/artifacts/mysql-test-run-junit.xml
+
+piuparts:
+ stage: test extras
+
+blhc:
+ stage: test extras
+
+# In addition to Salsa-CI, also run these fully MariaDB specific build jobs
+
+# Define snippets used to construct jobs
+
+.test-prepare-container: &test-prepare-container |
- sed -i "s/101/0/g" -i /usr/sbin/policy-rc.d
++ # Prepare container for use in CI
++ # Change directory to ./debian/output where build artifacts can be found
++ cd ${WORKING_DIR}
+ # Enable automatic restarts from maint scripts
- # Emit non-zero exit code also on warnings
++ sed -i "s/101/0/g" /usr/sbin/policy-rc.d
+ # Fake /sbin/runlevel to avoid warnings of "invoke-rc.d: could not determine current runlevel"
+ echo -e '#!/bin/sh\necho "N 5"' > /sbin/runlevel; chmod +x /sbin/runlevel
++ # Never stop apt to ask for confirmation, just assume `--yes` all the time
++ echo 'APT::Get::Assume-Yes "true";' > /etc/apt/apt.conf.d/assume-yes
++ # Ensure dpkg does not ask questions
++ export DEBIAN_FRONTEND=noninteractive
++ # Ensure dpkg does not stop to ask if config files should be kept, but instead
++ # just installs the maintainer version from the new package
++ cat > /etc/apt/apt.conf.d/99force-confnew <<EOF
++ Dpkg::Options {
++ "--force-confnew";
++ };
++ EOF
+ # Avoid the warnings of "debconf: unable to initialize frontend: Dialog"
+ echo 'debconf debconf/frontend select Noninteractive' | debconf-set-selections
- apt-get update -qq
-
- # Readline was removed from Debian Sid (and Bullseye) in Feb 2021. To be able to install older
- # versions of MariaDB that depend on it, fetch and install it from Buster.
- .test-install-readline-in-sid-for-backwards-compat: &test-install-readline-in-sid-for-backwards-compat |
- curl -sS -O https://snapshot.debian.org/archive/debian/20190316T031117Z/pool/main/r/readline5/libreadline5_5.2%2Bdfsg-3%2Bb13_amd64.deb
- apt-get -qq install --no-install-recommends --yes ./libreadline5_5.2%2Bdfsg-3%2Bb13_amd64.deb
-
- # OpenSSL 1.1 was Debian Sid in Dec 2022 (as Bookworm will ship with OpenSSL 3.0
- # only). To be able to install versions of MariaDB that depend on OpenSSL 1.1,
- # fetch and install it manually.
- .test-install-openssl1-in-sid-for-backwards-compat: &test-install-openssl1-in-sid-for-backwards-compat |
- curl -sS -O https://snapshot.debian.org/archive/debian/20220507T034236Z/pool/main/o/openssl/libssl1.1_1.1.1o-1_amd64.deb
- apt-get -qq install --no-install-recommends --yes ./libssl1.1_1.1.1o-1_amd64.deb
-
- # Package libaio1 was replaced by libaio1t64 in Debian Sid in April 2024. To
- # continue installing old MariaDB versions that depend on libaio1, use libaio1
- # from snapshots.
- .test-install-libaio-in-sid-for-backwards-compat: &test-install-libaio-in-sid-for-backwards-compat |
- curl -sS -O https://snapshot.debian.org/archive/debian/20240331T210805Z/pool/main/liba/libaio/libaio1_0.3.113-5_amd64.deb
- apt-get -qq install --no-install-recommends --yes ./libaio1_0.3.113-5_amd64.deb
++ # In CI runs we do not enforce strict supply-chain security and thus expired
++ # and missing keys are ignored. In particular when testing upgrades from old
++ # releases, the old repositories may have expired keys by design, and must be
++ # ignored for CI to be able to run. Instead of adding '[trusted=yes
++ # check-valid-until=no check-date=no]' to every 'deb https://' line in
++ # sources, lax apt security settings system-wide.
++ cat > /etc/apt/apt.conf.d/99ignore-keys <<EOF
++ APT::Get::AllowUnauthenticated "true";
++ Acquire::AllowInsecureRepositories "true";
++ Acquire::AllowDowngradeToInsecureRepositories "true";
++ Acquire::Check-Valid-Until "false";
++ Acquire::Check-Date "false";
++ EOF
++ # Emit non-zero exit code also on warnings to ensure CI stops on any issue
+ echo 'APT::Update::Error-Mode "any";' > /etc/apt/apt.conf.d/non-zero-exit-on-warnings
++ # Use archive.d.o for discontinued releases no longer on deb.d.o
++ if grep -q -E 'buster|stretch' /etc/os-release
++ then
++ # Update mirror url to point to archive.debian.org
++ sed -E -i "s/(deb|security)\.debian\.org/archive.debian.org/" /etc/apt/sources.list
++ # Drop the updates suite, as it's not present in archive.d.o
++ sed -E -i '/^deb .* [a-z]+-updates /d' /etc/apt/sources.list
++ fi
++ # Use archive.d.o for discontinued backports, which usually happens earlier
++ # than when the release is discontinued
++ if grep -q -E 'bullseye|buster|stretch' /etc/os-release && find /etc/apt/sources.list.d/backports.list
++ then
++ sed -E -i "s/deb\.debian\.org/archive.debian.org/" /etc/apt/sources.list.d/backports.list
++ fi
+ # Prime the apt cache so later apt commands can run
- dpkg -l | grep -iE 'maria|mysql|galera' || true # List installed
++ apt-get update -q
+
+.test-verify-initial: &test-verify-initial |
- # Replace any old repos with just Sid
- - echo 'deb http://deb.debian.org/debian sid main' > /etc/apt/sources.list
++ dpkg -l | grep -iE 'maria|mysql|galera' || true # List installed
+ # MariaDB until 10.5 only had 'mysql', and since only 'mariadb', so try both
+ service mysql status || service mariadb status
+ mysql --skip-column-names -e "select @@version, @@version_comment" # Show version
+ mysql --table -e "SHOW DATABASES;" # List databases before upgrade
+ mysql --table -e "SELECT host,user,plugin,authentication_string FROM user;" mysql
+ mysql --table -e "SELECT * FROM plugin;" mysql
+ mysql --table -e "SHOW PLUGINS;" mysql
+
+.test-enable-sid-repos: &test-enable-sid-repos
- - apt-get update -qq
- # Complete upgrade of minimal stack
- - apt-get install -qq --yes apt || export APT_STATUS="failed"
- # Due to https://bugs.debian.org/993755 and #975077 upgrades from Buster or
- # older to Bookworm or newer fails on:
++ # If already on Sid, most steps below will be skipped. If upgrading a distro
++ # older than Debian Bookworm, Sid will be enabled only up until March 2025
++ # version as after that a coreutils/util-linux made it impossible to upgrade.
++ - |
++ grep PRETTY_NAME /etc/os-release
++ if grep -q 'PRETTY_NAME="Debian GNU/Linux trixie/sid"' /etc/os-release
++ then
++ echo "Already using Sid, no need to enable it"
++ else
++ # Install tools that may be needed to circumvent issues in the upgrade
++ apt-get install -qq --yes --no-install-recommends ca-certificates curl
++ # Replace any old repos with just Sid
++ rm -vf /etc/apt/sources.list.d/debian.sources
++ echo 'deb http://deb.debian.org/debian sid main' > /etc/apt/sources.list
++ # Attempting upgrade from Bullseye or older to Debian Sid is no longer
++ # possible in April 2025, as even with all usrmerge workarounds applied
++ # the coreutils and util-linux upgrade is practically impossible due to
++ # versioned hard dependencies:
++ #
++ # coreutils : PreDepends: libsystemd0 (>= 254) but 247.3-7+deb11u6 is to be installed
++ # util-linux : PreDepends: libc6 (>= 2.41) but 2.38-11 is to be installed
++ #
++ # Thus, on these older distros, test upgrade only up until the Debian Sid
++ # March 2025 version (snapshot chosen just before coreutils/util-linux
++ # gained hard dependencies making upgrades from Bullseye/older impossible):
++ if grep -q -E 'bullseye|buster|stretch|jammy|focal' /etc/os-release
++ then
++ echo 'deb http://snapshot.debian.org/archive/debian/20250315T025205Z sid main' > /etc/apt/sources.list
++ fi
++ # Run update to ensure next install command uses latest apt sources
++ apt-get update -q
++ fi
+ # Upgrade minimal stack first
- # Therefore, run this extra workaround if first run of apt-get install failed:
++ - apt-get install -q --yes apt || export APT_STATUS="failed"
++ # Upgrades from Bullseye (or older) to Trixie (or newer) will pull in
++ # base-files 13.4+, which fails on:
++ # Preparing to unpack .../base-files_13.4_amd64.deb ...
++ # *************************************************************************
++ # *
++ # * The base-files package cannot be installed because
++ # * /bin is a directory, but should be a symbolic link.
++ # *
++ # * Please install the usrmerge package to convert this system to merged-/usr.
++ # *
++ # * For more information please read https://wiki.debian.org/UsrMerge.
++ # *
++ # *************************************************************************
++ # Therefore, an older base-files must be used:
++ - |
++ # If apt install failed, it might be due to base-files needing usrmerge.
++ # Attempt workaround using base-files 13.2 (snapshot chosen just before
++ # base-files 13.3 started requiring usrmerge).
++ if [ "$APT_STATUS" = "failed" ]
++ then
++ curl -sLO https://snapshot.debian.org/archive/debian/20240531T083821Z/pool/main/b/base-files/base-files_13.2_amd64.deb
++ # Apt version in Jessie does not support 'apt install ./package.deb', use this only for Stretch or newer
++ apt-get install -q --yes --no-install-recommends ./base-files_13.2_amd64.deb || true
++ # Ensure upgrades past 13.2 are blocked to avoid failure on usrmerge issue
++ apt-mark hold base-files
++ apt-get install -q --yes --fix-broken apt
++ # Upgrades from Ubuntu Jammy will fail on:
++ # Unpacking libc6-dev:amd64 (2.41-5) over (2.35-0ubuntu3.9) ...
++ # dpkg: error processing archive /var/cache/apt/archives/libc6-dev_2.41-5_amd64.deb (--unpack):
++ # trying to overwrite '/usr/lib/x86_64-linux-gnu/audit/sotruss-lib.so', which is also in package libc6:amd64 2.35-0ubuntu3.9
++ # This is because the Breaks/Replaces version in https://salsa.debian.org/glibc-team/glibc/-/commit/331bb702600840c345d804fe689e0d402dc5ad05
++ # does not match the Ubuntu version 2.35-0ubuntu3.9. Seems situation can be
++ # fixed with a simple re-run, which does not hurt on any other version either,
++ # so issue it every time just in case:
++ apt-get install -q --yes --fix-broken
++ apt-get install -q --yes --fix-broken apt
++ fi || export BASE_FILES_STATUS="failed"
++ # Latest apt attempts to pull in latest libc6, which fails on:
++ # libc6 : Breaks: base-files (< 13.3~) but 13.2 is to be installed
++ # Therefore, older libc6 and it's dependency libc6-bin must be used:
++ - |
++ # If base-files workaround failed, it might be due to libc6 breaking older
++ # base-files. Attempt workaround using libc6 2.38 (snapshot chosen just
++ # before libc6 2.39 started breaking base-files < 13.3).
++ if [ "$BASE_FILES_STATUS" = "failed" ]
++ then
++ curl -sLO https://snapshot.debian.org/archive/debian/20240531T083821Z/pool/main/g/glibc/libc6_2.38-11_amd64.deb
++ curl -sLO https://snapshot.debian.org/archive/debian/20240531T083821Z/pool/main/g/glibc/libc-bin_2.38-11_amd64.deb
++ # Extra ones needed for MariaDB *-dev package installs
++ curl -sLO https://snapshot.debian.org/archive/debian/20240531T083821Z/pool/main/g/glibc/libc6-dev_2.38-11_amd64.deb
++ curl -sLO https://snapshot.debian.org/archive/debian/20240531T083821Z/pool/main/g/glibc/libc-dev-bin_2.38-11_amd64.deb
++ # Apt version in Jessie does not support 'apt install ./package.deb', use this only for Stretch or newer
++ apt-get install -q --yes --no-install-recommends ./libc*_*.deb || true
++ # Ensure upgrades past 2.38-11 are blocked to avoid failure on usrmerge issue
++ apt-mark hold libc6 libc-bin libc6-dev libc-dev-bin
++ apt-get install -q --yes --fix-broken apt
++ fi || export LIBC_STATUS="failed"
++ # Due to https://bugs.debian.org/993755 and #975077 upgrades from Buster
++ # (or older) to Bookworm (or newer) fails on:
+ # /usr/bin/perl: error while loading shared libraries: libcrypt.so.1: cannot
+ # open shared object file: No such file or directory
+ # dpkg: error processing package libc6:amd64 (--configure):
- if [ "$APT_STATUS" = "failed" ]
++ # Therefore, the workaround in
++ # https://www.debian.org/releases/bookworm/amd64/release-notes/ch-information.en.html#libcrypt-upgrade-from-buster
++ # needs to be applied:
+ - |
- apt-get -y download libcrypt1
++ if [ "$LIBC_STATUS" = "failed" ]
+ then
+ cd $(mktemp -d) # Use temp dir where apt can download and unpack files
- cd - # Back to /builds/$USER/mariadb-server/debian/output
++ apt-get -q --yes download libcrypt1
+ dpkg-deb -x libcrypt1_*.deb .
+ cp -ra usr/lib/* /lib/ || true # libcrypt 1:4.4.36-3+
- apt-get -qq --yes --fix-broken install
- apt-get install -qq --yes apt
++ cd - # Back to CI run directory
+ find /lib/*/libcrypt.* -ls # Show that new libcrypt is there
- echo "deb [trusted=yes] file:$(pwd) ./" > /etc/apt/sources.list.d/mariadb-local.list
- apt-get update -qq
++ apt-mark unhold libc6 libc-bin libc6-dev libc-dev-bin
++ apt-get install -q --yes --fix-broken --no-install-recommends ./libc*_*.deb || true
++ # Ensure upgrades past 2.38-11 are blocked to avoid failure on usrmerge issue
++ apt-mark hold libc6 libc-bin libc6-dev libc-dev-bin
++ apt-get install -q --yes apt
+ fi
++ # If system has not undergone usrmerge upgrade, don't attempt it in CI containers
++ - test -L /bin || apt-mark hold usrmerge usr-is-merged
++ # For debugging purposes show what packages are now on hold
++ - apt-mark showhold
++ # Update base system
++ - |
++ # Upgrading from Stretch will fail on conflicts with util-linux:
++ # dpkg: error processing archive /var/cache/apt/archives/util-linux_2.40.2-1_amd64.deb (--unpack):
++ # trying to overwrite '/etc/pam.d/su', which is also in package login 1:4.4-4.1+deb9u1
++ # dpkg: error processing archive /var/cache/apt/archives/util-linux_2.40.2-1_amd64.deb (--unpack):
++ # trying to overwrite '/usr/share/bash-completion/completions/findmnt', which is also in package mount 2.29.2-1+deb9u1
++ # Root cause fix: https://salsa.debian.org/debian/util-linux/-/merge_requests/34
++ #
++ # Circumvent this by removing the conflicting packages first, as they are
++ # not essential for the upgrade to run.
++ # Note! If MariaDB is installed, this step will uninstall it.
++ if dpkg -l login mount | grep -F '+deb9'
++ then
++ apt-get remove login mount perl -qq --yes --allow-remove-essential || true
++ # Extra fix needed so MariaDB 10.1 shutdown in Stretch will proceed
++ test -L /lib || cp -av /usr/lib/lsb /lib/
++ apt-get remove login mount perl -qq --yes --allow-remove-essential || true
++ fi
++ # Preemptively upgrade sysvinit-utils and symlink new location from old to
++ # prevent upgrades from old MariaDB versions failing when the old service
++ # file tries to restart server before upgrade:
++ # /etc/init.d/mysql: line 22: /lib/lsb/init-functions: No such file or directory
++ - |
++ apt-get install -q --yes sysvinit-utils && cp -av /usr/lib/lsb /lib/ || true
++ # Upgrades from Ubuntu Noble fail on:
++ # Prevent: dpkg-divert: error:
++ # 'diversion of /lib32 to /.lib32.usr-is-merged by base-files' clashes
++ # with 'diversion of /lib32 to /lib32.usr-is-merged by base-files'
++ # This is because Noble already has these:
++ # $ dpkg-divert --list | grep 'by base-files'
++ # diversion of /libx32 to /.libx32.usr-is-merged by base-files
++ # diversion of /lib32 to /.lib32.usr-is-merged by base-files
++ # diversion of /libo32 to /.libo32.usr-is-merged by base-files
++ # Circumvent them by simply removing them before starting upgrade, as the
++ # upgrade of base-files will immediately put them back again:
++ - |
++ if grep -q -E 'noble' /etc/os-release
++ then
++ BASE_DIVERSIONS="$(dpkg-divert --list | grep 'by base-files' | \
++ grep --only-matching --perl-regex 'of\K /[a-z0-9]+ ')"
++ for x in $BASE_DIVERSIONS; do dpkg-divert --no-rename --remove $x; done
++ fi
++ # Due to usrmerge, several upgrade attempts are needed until it passes,
++ # with some manual copying of files from /usr/bin/ to /bin/
++ # First 'apt-get upgrade' run likely fails on:
++ # dpkg (subprocess): unable to execute installed bash package
++ # post-installation script (/var/lib/dpkg/info/bash.postinst): No such file
++ # or directory
++ # Second run fails on:
++ # dpkg (subprocess): unable to execute installed dash package
++ # post-installation script (/var/lib/dpkg/info/dash.postinst): No such file
++ # or directory
++ # Third run fails on:
++ # update-alternatives: error: alternative path /bin/more doesn't exist
++ # Fourth run likely passes.
++ - |
++ function usrmerge-temp-fix {
++ for x in bash cat cp dash ln more sh sleep rm
++ do
++ if [ -x /usr/bin/$x ]
++ then
++ cp -av /usr/bin/$x /bin/
++ fi
++ done
++ }
++ ATTEMPT=0
++ until apt-get install -q --yes bash dash util-linux coreutils lsb-base login mount
++ do
++ test -f /bin/cp || /usr/bin/cp -av /usr/bin/cp /bin/
++ usrmerge-temp-fix || true
++ ATTEMPT=$((ATTEMPT + 1))
++ if [ $ATTEMPT -ge 10 ]
++ then
++ echo "ERROR: Unable to apply usrmerge upgrade workaround"
++ exit 1
++ fi
++ done
++
++ # MariaDB depends on procps, which in turn depends on a libsystemd0 version
++ # that libc6 holds present in upgrades from Bullseye or older may prevent
++ # getting installed. Workaround this by upgrading it to the last version
++ # that was still compatible with libc6 2.38
++ if dpkg --compare-versions "256" gt "$(dpkg-query -W -f='${Version}' libsystemd0)"
++ then
++ curl -sLO https://snapshot.debian.org/archive/debian/20240531T083821Z/pool/main/s/systemd/libsystemd0_256~rc3-6_amd64.deb
++ apt-get install -q --yes --no-install-recommends ./libsystemd0_*.deb
++ fi
++ # Once base system is updated, we can re-enable latest sid repository again
++ - |
++ echo 'deb http://deb.debian.org/debian sid main' > /etc/apt/sources.list
++ apt-get update -q
+
+.test-enable-artifacts-repo: &test-enable-artifacts-repo |
++ # Show an ordered file listing that is easy to compare across builds and an be
++ # verified from logs that correct artifacts are present
++ find -maxdepth 3 -printf '%M %4u %4g %10s %TY-%Tm-%Td %TH:%TM %p\n' | sort -k 7
++ # Delete any custom pinning thay may have been used to install initial packages
++ rm -rfv /etc/apt/preferences.d/mariadb
+ apt-get install -qq --yes apt-utils
+ apt-ftparchive packages . > Packages
- - apt-get install -qq --simulate ${BUILT_PACKAGES}
++ apt-ftparchive release . > Release
++ echo "deb file:$(pwd) ./" > /etc/apt/sources.list.d/local.list
++ apt-get update -q
+
+.test-install-all: &test-install-all
+ - *test-enable-artifacts-repo
- - apt-get full-upgrade -qq --simulate
++ # Avoid `-qq` in simulate, as on errors it would not show any context info
++ - apt-get install -q --simulate ${BUILT_PACKAGES}
+ - apt-get install -qq --yes ${BUILT_PACKAGES}
+ # Verify installation of MariaDB built in this commit
+ - mariadb --version
+ - dpkg -l | grep -iE 'maria|mysql|galera'
+ - find /etc -name '*mariadb*' -ls -or -name '*mysql*' -ls | sort -k 11
+ # Purge old versions if they exist
+ - apt-get purge --yes mariadb*10.?
+ - find /etc -name '*mariadb*' -ls -or -name '*mysql*' -ls | sort -k 11
+
+.test-full-upgrade: &test-full-upgrade
+ - *test-enable-artifacts-repo
- .test-verify-final: &test-verify-final |
- dpkg -l | grep -e "mariadb-server.*10\.11"
- mkdir -p debug # Ensure dir exists before using it
- find /var/lib/mysql -ls > debug/var-lib-mysql.list || true # Ignore errors about "no such file or directory"
- cp -ra /etc/mysql debug/etc-mysql
- mariadb --skip-column-names -e "select @@version, @@version_comment" # Show version
- mariadb --table -e "SHOW DATABASES;" # List databases
- mariadb --table -e "SELECT host,user,plugin,authentication_string FROM user;" mysql
- mariadb --table -e "SELECT * FROM plugin;" mysql
- mariadb --table -e "SHOW PLUGINS;" mysql
- # Test that InnoDB works and that command 'mysql' is also still usable
- mysql -e "CREATE DATABASE test; USE test; CREATE TABLE t(a INT PRIMARY KEY) ENGINE=INNODB; INSERT INTO t VALUEs (1); SELECT * FROM t; DROP TABLE t; DROP DATABASE test;"
++ - apt-get full-upgrade -q --simulate
+ - apt-get full-upgrade -qq --yes
+ # Verify installation of MariaDB built in this commit
+ - mariadb --version
+ - dpkg -l | grep -iE 'maria|mysql|galera'
+ - find /etc -name '*mariadb*' -ls -or -name '*mysql*' -ls | sort -k 11
+ # Purge old versions if they exist
+ - apt-get purge --yes mariadb*10.?
+ - find /etc -name '*mariadb*' -ls -or -name '*mysql*' -ls | sort -k 11
+ # Purging the old server might stop the running server, so restart it just in case
+ - service mariadb restart
+
+.test-install-all-libs: &test-install-all-libs
+ - *test-enable-artifacts-repo
+ - apt-get install -yq --no-install-recommends libmariadb-dev-compat libmariadbd-dev
+ # Installs 31 packages, including:
+ # libmariadb3 libmariadb-dev libmariadb-dev-compat libmariadbd19t64 libmariadbd-dev
+
+.test-full-upgrade-libs: &test-full-upgrade-libs
+ - *test-enable-artifacts-repo
+ - apt-get full-upgrade -y
+ - dpkg -l | grep -iE 'maria|mysql|galera'
+ # library tests don't have the mariadb client nor server, so don't check them
+
- apt-get install -qq --yes --allow-downgrades ./*.deb # Server must be installed for client to connect
++.test-verify-final: &test-verify-final
++ # Extra fixes needed in upgrades from Bullseye or older
++ - test -f /bin/grep || cp -av /usr/bin/grep /bin/
++ - test -f /bin/mkdir || cp -av /usr/bin/mkdir /bin/
++ - |
++ dpkg -l | grep -e "mariadb-server.*11\.8"
++ mkdir -p debug # Ensure dir exists before using it
++ find /var/lib/mysql -ls > debug/var-lib-mysql.list || true # Ignore errors about "no such file or directory"
++ cp -ra /etc/mysql debug/etc-mysql
++ mariadb --skip-column-names -e "select @@version, @@version_comment" # Show version
++ mariadb --table -e "SHOW DATABASES;" # List databases
++ mariadb --table -e "SELECT host,user,plugin,authentication_string FROM user;" mysql
++ mariadb --table -e "SELECT * FROM plugin;" mysql
++ mariadb --table -e "SHOW PLUGINS;" mysql
++ # Test that InnoDB works and that command 'mysql' is also still usable
++ mysql -e "CREATE DATABASE test; USE test; CREATE TABLE t(a INT PRIMARY KEY) ENGINE=INNODB; INSERT INTO t VALUEs (1); SELECT * FROM t; DROP TABLE t; DROP DATABASE test;"
++ - mariadb --version
++ - dpkg -l | grep -iE 'maria|mysql|galera' || true # List installed
++ - >
++ dpkg -l | grep mariadb | grep salsaci || {
++ echo "ERROR! MariaDB was not upgraded from artifacts"
++ find -maxdepth 3 -printf '%M %4u %4g %10s %TY-%Tm-%Td %TH:%TM %p\n' | sort -k 7
++ exit 1
++ }
+
+.test-verify-libs: &test-verify-libs
+ # Don't use a collapsed command as Gitlab-CI would hide each command from the output
+ - ldconfig -p | grep -e mariadb -e mysql
+ - pkg-config --list-all
+ - pkg-config --cflags --libs mysqlclient
+ - pkg-config --cflags --libs libmariadb
+ - pkg-config --cflags --libs mariadb
+ - apt-get install -qq --yes --no-install-recommends g++
+ - |
+ # Build a test binary that depends on libmysqlclient
+ cat > b933063.cpp <<EOF
+ #include <iostream>
+ #include <mysql/mysql.h>
+ #include <stdexcept>
+ int main()
+ {
+ MYSQL h;
+ if (!mysql_init(&h)
+ || mysql_options(&h, MYSQL_READ_DEFAULT_GROUP, "")
+ // || mysql_options(&h, MYSQL_SET_CHARSET_NAME, "utf8mb4")
+ || !mysql_real_connect(&h, "", "", NULL, "", 0, NULL, 0))
+ throw std::runtime_error(mysql_error(&h));
+ std::string q = "show variables like '%char%'";
+ if (mysql_real_query(&h, q.data(), q.size()))
+ throw std::runtime_error(mysql_error(&h));
+ MYSQL_RES* result = mysql_store_result(&h);
+ if (!result && mysql_errno(&h))
+ throw std::runtime_error(mysql_error(&h));
+ while (MYSQL_ROW row = mysql_fetch_row(result))
+ {
+ std::cout << row[0] << ": " << row[1] << "\n";
+ }
+ return 0;
+ }
+ EOF
- test_if_starts_with("1011", to_string(MARIADB_VERSION_ID), "MARIADB_VERSION_ID");
- test_if_starts_with("1011", to_string(MYSQL_VERSION_ID), "MYSQL_VERSION_ID");
++ apt-get install -q --yes ./*.deb # Server must be installed for client to connect
+ echo "Testing -l mysqlclient"
+ g++ b933063.cpp -l mysqlclient && ./a.out | tee result
+ if grep --quiet latin result; then echo "ERROR: Charset latin found!"; exit 1; fi
+ echo "Testing -l mariadbclient"
+ g++ b933063.cpp -l mariadbclient && ./a.out | tee result
+ if grep --quiet latin result; then echo "ERROR: Charset latin found!"; exit 1; fi
+ - |
+ # Build a test binary to verify API version strings
+ cat > b1031863.cpp <<EOF
+ #include <cstring>
+ #include <iostream>
+ #include <mysql/mysql.h>
+ using namespace std;
+
+ void test_if_starts_with(const string expected, const string tested, const string name) {
+ int r = strncmp(tested.c_str(), expected.c_str(), expected.size());
+ if (r == 0) {
+ cout << name << ": " << tested << "\n";
+ } else {
+ cout << "ERROR: " << name << " started with " << tested << " instead of the expected " << expected << "!\n";
+ exit(1);
+ }
+ }
+
+ int main()
+ {
+ MYSQL h;
+ // Constants refer to server version
- test_if_starts_with("303", to_string(mysql_get_client_version()), "mysql_get_client_version()");
- test_if_starts_with("3.3", mysql_get_client_info(), "mysql_get_client_info()");
++ test_if_starts_with("1108", to_string(MARIADB_VERSION_ID), "MARIADB_VERSION_ID");
++ test_if_starts_with("1108", to_string(MYSQL_VERSION_ID), "MYSQL_VERSION_ID");
+ // Client ABI returns connector version
-
++ test_if_starts_with("304", to_string(mysql_get_client_version()), "mysql_get_client_version()");
++ test_if_starts_with("3.4", mysql_get_client_info(), "mysql_get_client_info()");
+ return 0;
+ }
+ EOF
+ g++ b1031863.cpp -l mysqlclient && ./a.out
+
- except:
- variables:
- - $CI_COMMIT_TAG != null && $SALSA_CI_ENABLE_PIPELINE_ON_TAGS !~ /^(1|yes|true)$/
+.salsa-ci-template-for-mariadb:
+ stage: test
+ needs:
+ - job: build
++ artifacts: true
+ image: debian:${RELEASE}
+ artifacts:
+ when: always
+ name: "$CI_BUILD_NAME"
+ paths:
+ - ${WORKING_DIR}/debug
+ script:
+ - echo "This script section must be overridden in each test" && exit 1
+ variables:
+ GIT_STRATEGY: none
- - apt-get install -qq --yes --no-install-recommends ca-certificates curl
++ rules:
++ # Do not create a pipeline for tags unless SALSA_CI_ENABLE_PIPELINE_ON_TAGS is set
++ - if: $CI_COMMIT_TAG != null && $SALSA_CI_ENABLE_PIPELINE_ON_TAGS !~ /^(1|yes|true)$/
++ when: never
++ - when: always
+
+.salsa-ci-template-for-mariadb-upgrade:
+ stage: test
+ needs:
+ - job: build
++ artifacts: true
+ image: debian:${RELEASE}
+ artifacts:
+ when: always
+ name: "$CI_BUILD_NAME"
+ paths:
+ - ${WORKING_DIR}/debug
+ before_script:
+ - *test-prepare-container
- [[ -d /etc/apt/keyrings ]] || mkdir /etc/apt/keyrings
- curl -sS https://mariadb.org/mariadb_release_signing_key.pgp -o /etc/apt/keyrings/mariadb-keyring.pgp
- cat >/etc/apt/sources.list.d/mariadb.sources <<EOF
++ - apt-get install -qq --yes --no-install-recommends ca-certificates
+ - |
- Suites: ${RELEASE}
++ cat > /etc/apt/sources.list.d/mariadb.sources <<EOF
+ X-Repolib-Name: MariaDB
+ Types: deb
+ URIs: https://archive.mariadb.org/mariadb-${MARIADB_VERSION}/repo/debian
- Signed-By: /etc/apt/keyrings/mariadb-keyring.pgp
++ Suites: sid
+ Components: main
- except:
- variables:
- - $CI_COMMIT_TAG != null && $SALSA_CI_ENABLE_PIPELINE_ON_TAGS !~ /^(1|yes|true)$/
++ EOF
++ # Pin the MariaDB.org repository so all MariaDB packages are from the
++ # MariaDB archive and not from the Debian/Ubntu archive
++ cat > /etc/apt/preferences.d/mariadb <<EOF
++ Package: *
++ Pin: origin archive.mariadb.org
++ Pin-Priority: 1000
++
++ Package: *
++ Pin: release o=Debian
++ Pin-Priority: 500
+ EOF
+ - apt-get update -qq
+ script:
+ - echo "This script section must be overridden in each test" && exit 1
+ variables:
+ GIT_STRATEGY: none
+ MARIADB_VERSION: "10.0"
- echo 'deb [check-valid-until=no] http://snapshot.debian.org/archive/debian/20230208T130000Z bookworm main' > /etc/apt/sources.list.d/bookworm.list
++ RELEASE: sid # does not seem to affect "Suites: ${RELEASE}", resorting to hard-coded string there
++ rules:
++ # Do not create a pipeline for tags unless SALSA_CI_ENABLE_PIPELINE_ON_TAGS is set
++ - if: $CI_COMMIT_TAG != null && $SALSA_CI_ENABLE_PIPELINE_ON_TAGS !~ /^(1|yes|true)$/
++ when: never
++ - when: always
+
+fresh install:
+ extends: .salsa-ci-template-for-mariadb
+ script:
+ - *test-prepare-container
+ - *test-install-all
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
+simple upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB
+ script:
+ - *test-prepare-container
+ - apt-get install -qq --yes 'default-mysql*' ${BUILT_PACKAGES}
+ - *test-full-upgrade
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
+mariadb and Bookworm upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB and distro
+ image: debian:bookworm
+ script:
+ - *test-prepare-container
+ # Install everything MariaDB currently in Debian Bookworm
+ - apt-get install -qq --yes 'default-mysql*' 'mariadb-*' 'libmariadb*'
+ # Verify installation of MariaDB from Bookworm
+ - dpkg -l | grep -e "mariadb-server.*10\.11"
+ - *test-verify-initial
+ - *test-enable-sid-repos
+ # Ensure mariadbd will not crash on next shutdown for any reason
+ - service mariadb restart
+ - *test-full-upgrade
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
+mariadb-10.6 and Bookworm-20230208 upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB and distro
+ image: debian:bookworm-20230208
+ script:
+ - *test-prepare-container
+ - |
- - apt-get install -qq --yes mariadb-server
++ echo 'deb http://snapshot.debian.org/archive/debian/20230208T130000Z bookworm main' > /etc/apt/sources.list.d/bookworm.list
+ rm /etc/apt/sources.list.d/debian.sources
+ apt-get update -qq
+ # In February 2023 Bookworm snapshot this will install MariaDB 10.6
- mariadb-10.6 and Jammy upgrade:
++ - apt-get install -qq --yes 'default-mysql*' 'mariadb-*' 'libmariadb*'
+ # Verify installation of MariaDB from (February 2023) Bookworm
+ - dpkg -l | grep -e "mariadb-server.*10\.6"
+ - *test-verify-initial
+ - *test-enable-sid-repos
+ # Ensure mariadbd will not crash on next shutdown for any reason
+ - service mariadb restart
+ - *test-full-upgrade
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - apt-get purge --yes mariadb*10.?
+ - *test-verify-final
+
- # Install Debian Sid signing keys as Ubuntu does not have them by default
- - apt-get install -qq --yes --no-install-recommends curl
- - curl -sSLO http://deb.debian.org/debian/pool/main/d/debian-archive-keyring/debian-archive-keyring_2023.4_all.deb
- - apt-get install -qq --yes ./debian-archive-keyring_*
++mariadb-10.6 and Ubuntu Jammy upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB and distro
+ image: ubuntu:jammy
+ script:
+ - *test-prepare-container
+ # Install everything MariaDB currently in Ubuntu Jammy
+ - apt-get install -qq --yes 'mariadb-*' 'libmariadb*'
+ # Verify installation of MariaDB from Jammy
+ - dpkg -l | grep -e "mariadb-server.*10\.6"
+ - *test-verify-initial
- - apt-get install -qq --simulate mariadb-server
+ - *test-enable-sid-repos
+ # Ensure mariadbd will not crash on next shutdown for any reason
+ - service mariadb restart
+ - *test-enable-artifacts-repo
- - apt-get install -qq --simulate mariadb-server
++ - apt-get install -q --simulate mariadb-server
+ - apt-get install -qq --yes mariadb-server
+ # Due to usrmerge, full-upgrade from Jammy to Trixie or newer cannot work
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - apt-get purge --yes mariadb*10.?
+ - *test-verify-final
+
+mariadb-10.5 and Bullseye upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB and distro
+ image: debian:bullseye
+ script:
+ - *test-prepare-container
+ # Install everything MariaDB currently in Debian Bullseye
+ - apt-get install -qq --yes 'default-mysql*' 'mariadb-*' 'libmariadb*'
+ # Verify installation of MariaDB from Bullseye
+ - dpkg -l | grep -e "mariadb-server.*10\.5"
+ - *test-verify-initial
+ - *test-enable-sid-repos
+ # Ensure mariadbd will not crash on next shutdown for any reason
+ - service mariadb restart
+ - *test-enable-artifacts-repo
- mariadb-10.3 and Buster upgrade:
- extends: .salsa-ci-template-for-mariadb
- stage: upgrade MariaDB and distro
- image: debian:buster
- script:
- - *test-prepare-container
- # Install everything MariaDB currently in Debian Buster
- - apt-get install -qq --yes 'default-mysql*' 'mariadb-*' 'libmariadb*'
- # Verify installation of MariaDB from Buster
- - dpkg -l | grep -e "mariadb-server.*10\.3"
- - *test-verify-initial
- - *test-enable-sid-repos
- # Ensure mariadbd will not crash on next shutdown for any reason
- - service mysql restart # in 10.3 service name is still 'mysql'
- - *test-enable-artifacts-repo
- - apt-get install -qq --simulate mariadb-server
- - apt-get install -qq --yes mariadb-server
- # Due to usrmerge, full-upgrade from Bullseye to Trixie or newer cannot work
- - service mysql status
- # mariadb-10.3 in Buster ships a /etc/init.d/mysql and it continues to exist
- # after upgrade, and is removed only on purge
- - apt-get purge --yes mariadb*10.?
- - service mariadb status
- # Give the mariadb-upgrade plenty of time to complete, otherwise next commands
- # fail on non-existing mariadb.sys user
- - sleep 15
- - *test-verify-final
-
- mariadb-10.3 and Focal upgrade:
++ - apt-get install -q --simulate mariadb-server
+ - apt-get install -qq --yes mariadb-server
+ # Due to usrmerge, full-upgrade from Bullseye to Trixie or newer cannot work
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - apt-get purge --yes mariadb*10.?
+ - *test-verify-final
+
- # Install Debian Sid signing keys as Ubuntu does not have them by default
- - apt-get install -qq --yes --no-install-recommends curl
- - curl -sSLO http://deb.debian.org/debian/pool/main/d/debian-archive-keyring/debian-archive-keyring_2023.4_all.deb
- - apt-get install -qq --yes ./debian-archive-keyring_*
++mariadb-10.3 and Ubuntu Focal upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB and distro
+ image: ubuntu:focal
+ script:
+ - *test-prepare-container
+ # Install everything MariaDB currently in Ubuntu Focal
+ - apt-get install -qq --yes 'mariadb-*' 'libmariadb*'
+ # Verify installation of MariaDB from Focal
+ - dpkg -l | grep -e "mariadb-server.*10\.3"
+ - *test-verify-initial
- - apt-get install -qq --simulate default-mysql-server
- - apt-get install -qq --yes default-mysql-server
+ - *test-enable-sid-repos
+ # Ensure mariadbd will not crash on next shutdown for any reason
+ - service mysql restart # in 10.3 service name is still 'mysql'
+ - *test-enable-artifacts-repo
+ - apt-get install -qq --simulate mariadb-server
+ - apt-get install -qq --yes mariadb-server
+ # Due to usrmerge, full-upgrade from Focal to Trixie or newer cannot work
+ - service mysql status
+ # mariadb-10.3 in Focal ships a /etc/init.d/mysql and it continues to exist
+ # after upgrade, and is removed only on purge
+ - apt-get purge --yes mariadb*10.?
+ # Give the mariadb-upgrade plenty of time to complete, otherwise next commands
+ # fail on non-existing mariadb.sys user
+ - sleep 15
+ - *test-verify-final
+
+# Similar to the Cacti install test, check that MariaDB consumer Zoph upgrades
+default-mysql-server and Bookworm upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB and distro
+ image: debian:bookworm
+ script:
+ - *test-prepare-container
+ # Install everything MariaDB currently in Debian Bookworm
+ - apt-get install -qq --yes default-mysql-server zoph
+ # Verify installation of MariaDB from Bookworm
+ - dpkg -l | grep -e "mariadb-server.*10\.11"
+ - *test-verify-initial
+ - *test-enable-sid-repos
+ - *test-enable-artifacts-repo
- - apt-get install -qq --yes pkg-config python3-pip
++ # Ensure provider plugins are upgraded together with the server, otherwise
++ # this job can end up with 10.11 providers and an 11.x server (see
++ # mariadb-server #1121151, apt #1121158).
++ - apt-get install -qq --simulate default-mysql-server mariadb-plugin-provider-bzip2 mariadb-plugin-provider-lz4 mariadb-plugin-provider-lzma mariadb-plugin-provider-lzo mariadb-plugin-provider-snappy
++ - apt-get install -qq --yes default-mysql-server mariadb-plugin-provider-bzip2 mariadb-plugin-provider-lz4 mariadb-plugin-provider-lzma mariadb-plugin-provider-lzo mariadb-plugin-provider-snappy
+ - *test-full-upgrade
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
+# Similar to the Cacti install test, check that MariaDB consumer Zoph upgrades
+default-mysql-server and Bullseye upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB and distro
+ image: debian:bullseye
+ script:
+ - *test-prepare-container
+ # Install everything MariaDB currently in Debian Bullseye
+ - apt-get install -qq --yes default-mysql-server zoph
+ # Verify installation of MariaDB from Bullseye
+ - dpkg -l | grep -e "mariadb-server.*10\.5"
+ - *test-verify-initial
+ - *test-enable-sid-repos
+ - *test-enable-artifacts-repo
+ - apt-get install -qq --simulate default-mysql-server
+ - apt-get install -qq --yes default-mysql-server
+ # Due to usrmerge, full-upgrade from Bullseye to Trixie or newer cannot work
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
+test basic features:
+ extends: .salsa-ci-template-for-mariadb
+ script:
+ - *test-prepare-container
+ - *test-install-all
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+ - |
+ # Print info about server
+ mariadb --skip-column-names -e "select @@version, @@version_comment"
+ mariadb --skip-column-names -e "select engine, support, transactions, savepoints from information_schema.engines order by engine" | sort
+ mariadb --skip-column-names -e "select plugin_name, plugin_status, plugin_type, plugin_library, plugin_license from information_schema.all_plugins order by plugin_name, plugin_library"
+ # Test various features
+ mariadb -e "CREATE DATABASE db"
+ mariadb -e "CREATE TABLE db.t_innodb(a1 SERIAL, c1 CHAR(8)) ENGINE=InnoDB; INSERT INTO db.t_innodb VALUES (1,'"'"'foo'"'"'),(2,'"'"'bar'"'"')"
+ mariadb -e "CREATE TABLE db.t_myisam(a2 SERIAL, c2 CHAR(8)) ENGINE=MyISAM; INSERT INTO db.t_myisam VALUES (1,'"'"'foo'"'"'),(2,'"'"'bar'"'"')"
+ mariadb -e "CREATE TABLE db.t_aria(a3 SERIAL, c3 CHAR(8)) ENGINE=Aria; INSERT INTO db.t_aria VALUES (1,'"'"'foo'"'"'),(2,'"'"'bar'"'"')"
+ mariadb -e "CREATE TABLE db.t_memory(a4 SERIAL, c4 CHAR(8)) ENGINE=MEMORY; INSERT INTO db.t_memory VALUES (1,'"'"'foo'"'"'),(2,'"'"'bar'"'"')"
+ mariadb -e "CREATE ALGORITHM=MERGE VIEW db.v_merge AS SELECT * FROM db.t_innodb, db.t_myisam, db.t_aria"
+ mariadb -e "CREATE ALGORITHM=TEMPTABLE VIEW db.v_temptable AS SELECT * FROM db.t_innodb, db.t_myisam, db.t_aria"
+ mariadb -e "CREATE PROCEDURE db.p() SELECT * FROM db.v_merge"
+ mariadb -e "CREATE FUNCTION db.f() RETURNS INT DETERMINISTIC RETURN 1"
+ # Test that the features still work (this step can be done e.g. after an upgrade)
+ mariadb -e "SHOW TABLES IN db"
+ mariadb -e "SELECT * FROM db.t_innodb; INSERT INTO db.t_innodb VALUES (3,'"'"'foo'"'"'),(4,'"'"'bar'"'"')"
+ mariadb -e "SELECT * FROM db.t_myisam; INSERT INTO db.t_myisam VALUES (3,'"'"'foo'"'"'),(4,'"'"'bar'"'"')"
+ mariadb -e "SELECT * FROM db.t_aria; INSERT INTO db.t_aria VALUES (3,'"'"'foo'"'"'),(4,'"'"'bar'"'"')"
+ mariadb -e "SELECT * FROM db.t_memory; INSERT INTO db.t_memory VALUES (3,'"'"'foo'"'"'),(4,'"'"'bar'"'"')"
+ mariadb -e "SELECT COUNT(*) FROM db.v_merge"
+ mariadb -e "SELECT COUNT(*) FROM db.v_temptable"
+ mariadb -e "CALL db.p()"
+ mariadb -e "SELECT db.f()"
+ - |
+ # Test TLS connections
+ dpkg -l | grep -i -e tls -e ssl
+ # Create user for TCP connection, must have password
+ mariadb -e "SET PASSWORD FOR 'mysql'@'localhost' = PASSWORD('asdf234');"
+ cat <<EOF > /root/.my.cnf
+ [client]
+ user=mysql
+ password=asdf234
+ protocol=tcp
+ EOF
+ export CERT_PATH=/usr/share/mariadb/mariadb-test/std_data
+ openssl verify -CAfile $CERT_PATH/cacert.pem $CERT_PATH/server-cert.pem
+ openssl x509 -subject -issuer -noout -in $CERT_PATH/cacert.pem
+ openssl x509 -subject -issuer -noout -in $CERT_PATH/server-cert.pem
+ cat <<EOF > /etc/mysql/mariadb.conf.d/tls.cnf
+ [client-server]
+ ssl = on
+ ssl-ca = $CERT_PATH/cacert.pem
+ ssl-cert = $CERT_PATH/server-cert.pem
+ ssl-key = $CERT_PATH/server-key.pem
+ [server]
+ require-secure-transport = on
+ [client]
+ ssl-verify-server-cert = on
+ EOF
+ service mariadb restart
+ mariadb -Bse 'STATUS' | tee result
+ # Ensure important values present, otherwise fail job
+ grep --quiet "localhost via TCP/IP" result
+ mariadb -Bse 'SHOW VARIABLES' | grep -e tls -e ssl | tee result
+ grep --quiet "have_ssl YES" result
+ grep --quiet TLSv1.3 result
+ mariadb -Bse 'SHOW SESSION STATUS' | grep -i -e tls -e ssl | tee result
+ grep --quiet TLSv1.3 result
+
+# Install Cacti, which in uses dbconfig-common to configure the MariaDB user and
+# connection automatically in order to validate that at least one downstream
+# server consumer continues to work.
+test consumer cacti:
+ extends: .salsa-ci-template-for-mariadb
+ script:
+ - *test-prepare-container
+ - *test-enable-artifacts-repo
+ - apt-get install -qq --yes cacti
+ - mariadb -E -e "SHOW CREATE TABLE version;" cacti
+
+# Build a piece of software that was designed for libmysqlclient-dev but using the
+# libmariadb-dev-compat layer. Should always end up using libmariadb.so.3 run-time.
+build mariadbclient consumer Python-MySQLdb:
+ extends: .salsa-ci-template-for-mariadb
+ script:
+ - *test-prepare-container
+ - *test-install-all-libs
- - apt-get install -qq --yes default-libmysqlclient-dev default-libmysqld-dev
++ - apt-get install -qq --yes pkg-config python3-pip build-essential
+ # See what MySQLdb will build with
+ - pkg-config --cflags --libs mysqlclient
+ # MySQLdb is also available in Debian as package python3-mysqldb, but
+ # install it from pip to force that the client is compiled with
+ # libmariadb-dev-compat on-the-fly.
+ # Python 3.11 needs `--break-system-packages` to proceed with this.
+ - pip3 install --break-system-packages mysqlclient # Compiles module against libmysqlclient
+ - apt-get purge --yes libmariadb-dev # Not needed for run-time
+ - python3 -c "import MySQLdb; print(MySQLdb.get_client_info())"
+
+libmysql* to libmariadb* upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB
+ script:
+ - *test-prepare-container
+ # Install all libmysql* available in Debian unstable
+ - apt-get install -qq --yes pkg-config libmysqlclient-dev
+ - pkg-config --list-all
+ - pkg-config --cflags mysqlclient # mysqlclient.pc from original package
+ - *test-enable-artifacts-repo
+ - apt-get install -qq --yes libmariadb3
+ - pkg-config --list-all
+ - apt-get install -qq --yes libmariadb-dev
+ - pkg-config --list-all
+ - apt-get install -qq --yes libmariadb-dev-compat
+ - pkg-config --cflags mysqlclient # mysqlclient.pc from compat package
+ - pkg-config --list-all
+ - apt-get install -qq --yes libmariadbd19t64
+ - pkg-config --list-all
+ - apt-get install -qq --yes libmariadbd-dev
+ - pkg-config --list-all
- - apt-get install -qq --yes pkg-config default-libmysqlclient-dev default-libmysqld-dev
++ - apt-get install -qq --yes default-libmysqlclient-dev
+ - *test-verify-libs
+
+default-libmysqlclient-dev upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB
+ script:
+ - *test-prepare-container
- - *test-full-upgrade-libs
- - *test-verify-libs
-
- default-libmysqlclient-dev and Bullseye upgrade:
- extends: .salsa-ci-template-for-mariadb
- stage: upgrade MariaDB and distro
- image: debian:bullseye
- script:
- - *test-prepare-container
++ - apt-get install -qq --yes pkg-config default-libmysqlclient-dev
+ - pkg-config --list-all
+ - *test-full-upgrade-libs
+ - *test-verify-libs
+
+default-libmysqlclient-dev and Bookworm upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB and distro
+ image: debian:bookworm
+ script:
+ - *test-prepare-container
+ - apt-get install -qq --yes pkg-config default-libmysqlclient-dev
+ - pkg-config --list-all
+ - *test-enable-sid-repos
- - pkg-config --list-all
- - *test-enable-sid-repos
- # Due to usrmerge, full-upgrade from Bullseye to Trixie or newer cannot work
- - *test-install-all-libs
++ # Must be reinstalled as libc6 upgrade removes them:
+ - apt-get install -qq --yes pkg-config default-libmysqlclient-dev
- # No longer possible since as it pulls as dependencies packages that trigger
- # usrmerge, which cannot run in a container
++ - *test-full-upgrade-libs
+ - *test-verify-libs
+
- # The postinst fails often if 'ps' is missing from system, so install procps
- - apt-get install -qq --yes 'mysql*' libmysqlcppconn7t64
++# No longer possible since due to entanglement with usrmerge upgrades:
++#default-libmysqlclient-dev and Bullseye upgrade:
+#default-libmysqlclient-dev and Buster upgrade:
+
+# Upgrading from MySQL 8.0 with datadir in place is not possible. Users need to do a data dump.
+# The Debian maintainer scripts detect this situation and simply moves old datadir aside and start fresh.
+mysql-8.0 in Sid upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB variant
+ image: debian:sid
+ script:
+ - *test-prepare-container
- - *test-verify-initial
++ # Using 'mysql*' would match also mysql-workbench, which is broken, so use
++ # more exact matchers
++ - apt-get install -q --yes 'mysql-t*' 'mysql-s*' 'mysql-c*' mysqltcl 'mysql-r*' libmysqlcppconn7t64
+ # Ensure MySQL 8.0 package actually got installed
+ - dpkg -l | grep -e "mysql-server.*8\.0"
- # Upgrading from MySQL 8.0 with datadir in place is not possible. Users need to do a data dump.
++ # As MySQL no longer ships an init.d file in 8.0.43-3, define a custom
++ # test-verify-initial that does not depend on the service starting
++ - |
++ dpkg -l | grep -iE 'maria|mysql|galera' || true # List installed
++ # MariaDB until 10.5 only had 'mysql', and since only 'mariadb', so try both
++ service mysql status || service mariadb status || true
++ mysql --skip-column-names -e "select @@version, @@version_comment" || true # Show version
++ mysql --table -e "SHOW DATABASES;" || true # List databases before upgrade
++ mysql --table -e "SELECT host,user,plugin,authentication_string FROM user;" mysql || true
++ mysql --table -e "SELECT * FROM plugin;" mysql || true
++ mysql --table -e "SHOW PLUGINS;" mysql || true
+ - *test-install-all
+ # Due to some (currently unknown) changes in MySQL 8.0 packaging or apt
+ # behaviour changes, a system with a previous installation of MySQL 8.0 will
+ # on upgrades to MariaDB first fully remove MySQL, including the
+ # /etc/init.d/mysql file, so previous techniques in
+ # mariadb-server-10.6.postinst to maintain backwards compatibility with
+ # 'service mysql status' after installing MariaDB on top MySQL no longer
+ # works. Thus the step to test it now intentionally has a fallback to use
+ # the service name 'mariadb' instead, and the fallback is always used.
+ - sleep 5 # Give the mysql_upgrade a bit of time to complete before querying the server
+ - service mysql status || service mariadb status
+ - *test-verify-final
+
- mysql-8.0 in Ubuntu 23.10 upgrade:
++# Upgrading from MySQL 8.4 with datadir in place is not possible. Users need to do a data dump.
+# The Debian maintainer scripts detect this situation and simply moves old datadir aside and start fresh.
- image: ubuntu:mantic
++mysql-8.4 in Ubuntu 25.04 upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB variant
- - apt-get install -qq --yes procps mysql-server 'libmysqlc*'
++ image: ubuntu:plucky
+ script:
+ - *test-prepare-container
- - service mysql status
- - *test-verify-initial
- # Install Debian Sid signing keys as Ubuntu does not have them by default
- - apt-get install -qq --yes --no-install-recommends curl
- - curl -sSLO http://deb.debian.org/debian/pool/main/d/debian-archive-keyring/debian-archive-keyring_2023.4_all.deb
- - apt-get install -qq --yes ./debian-archive-keyring_*
++ - apt-get install -qq --yes procps mysql-server 'libmysqlc*' systemctl
+ # Ensure MySQL 8.0 package actually got installed
+ - dpkg -l | grep mysql
- # Ensure mysqld will not crash on next shutdown for any reason
- - service mysql restart
++ - sed 's/ExecStartPre=+/ExecStartPre=/' -i /lib/systemd/system/mysql.service # Hack to make file compatible with systemctl shim
++ - systemctl start mysql
++ - dpkg -l | grep -iE 'maria|mysql|galera'
++ - systemctl status mysql; mysql -e 'SELECT VERSION()'
++ - systemctl stop mysql # Stop manually as maintainer scripts don't handle this with systemctl shim
+ - *test-enable-sid-repos
- # Due to usrmerge, full-upgrade from Mantic to Trixie or newer may not work
++ # MySQL 8.4 in Ubuntu does not ship any /etc/init.d/mysql nor is the systemd
++ # service file compatible with daemonless systemctl, so skip trying to
++ # start or stop the service, just proceed directly to upgrade
+ - *test-enable-artifacts-repo
+ - apt-get install -qq --simulate mariadb-server
+ - apt-get install -qq --yes mariadb-server
- - |
- apt-get install -qq --yes --no-install-recommends ca-certificates curl systemctl
- curl -sS "https://keyserver.ubuntu.com/pks/lookup?op=get&search=0xbca43417c3b485dd128ec6d4b7b3b788a8d3785c" -o /etc/apt/trusted.gpg.d/mysql.asc
- echo "deb https://repo.mysql.com/apt/debian/ bookworm mysql-cluster-8.0" > /etc/apt/sources.list.d/mysql.list
- apt-get update -qq
- - apt-get install -qq --yes mysql-cluster-community-server
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ # Remove everything MySQL except mysql-common which also MariaDB depends on
+ - apt-get purge --yes mysql-s* mysql-cl* libmysql*
+ - *test-verify-final
+
+# Upgrading from MySQL 8.0 with datadir in place is not possible. Users need to do a data dump.
+# The Debian maintainer scripts detect this situation and simply moves old datadir aside and start fresh.
+mysql-community-cluster-8.0 from MySQL.com with Bookworm upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB variant
+ image: debian:bookworm
+ script:
+ - *test-prepare-container
- mariadb.org-10.11 upgrade:
++ - apt-get install -qq --yes --no-install-recommends ca-certificates
++ - echo "deb https://repo.mysql.com/apt/debian/ bookworm mysql-cluster-8.0" > /etc/apt/sources.list.d/mysql.list
++ - apt-get update -qq
++ - apt-get install -qq --yes mysql-cluster-community-server systemctl
+ - sed 's/ExecStartPre=+/ExecStartPre=/' -i /lib/systemd/system/mysql.service # Hack to make file compatible with systemctl shim
+ - systemctl start mysql
+ - dpkg -l | grep -iE 'maria|mysql|galera'
+ - systemctl status mysql; mysql -e 'SELECT VERSION()'
+ - systemctl stop mysql # Stop manually as maintainer scripts don't handle this with systemctl shim
+ - *test-enable-sid-repos
+ - *test-enable-artifacts-repo
+ - apt-get install -qq --simulate mariadb-server
+ - apt-get install -qq --yes mariadb-server
+ # Ignore systemctl shim result as MariaDB systemd file is incompatible with it and yields:
+ # ERROR:systemctl:the ExecStartPre control process exited with error code
+ - systemctl status mysql || true
+ - mysql -e 'SELECT VERSION()' || true
+ - sleep 5 # Give the mysql_upgrade a bit of time to complete before querying the server
+ - *test-verify-final
+
- MARIADB_VERSION: "10.11"
++mariadb.org-11.8 upgrade:
+ extends: .salsa-ci-template-for-mariadb-upgrade
+ stage: upgrade MariaDB variant
+ variables:
- # Force downgrades so our version installs on top of upstream revision, e.g. 1:11.10.1-1 vs 1:11.10.1+mariadb~sid
- - apt-get install -qq --yes --allow-downgrades ./*.deb
++ MARIADB_VERSION: "11.8"
+ script:
+ - apt-get install -qq --yes mariadb-server
++ - dpkg -l | grep -e "mariadb-server.*11\.8"
+ - *test-verify-initial
+ # Install MariaDB built in this commit
- mariadb.org-10.10 upgrade:
++ # Force downgrades so our version installs on top of upstream revision, e.g. 1:11.4.2-1 vs 1:11.4.2+mariadb~debsid
++ - apt-get install -q --yes --allow-downgrades ./*.deb
+ # Verify installation of MariaDB built in this commit
+ - dpkg -l | grep -iE 'maria|mysql|galera' || true # List installed
+ - mariadb --version # Client version
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
- MARIADB_VERSION: "10.10"
++# archive.mariadb.org for Debian Sid latest is 11.7.2
++mariadb.org-11.7 upgrade:
+ extends: .salsa-ci-template-for-mariadb-upgrade
+ stage: upgrade MariaDB variant
+ variables:
- # this should not use Sid to begin with
- - apt-get install -qq --yes mariadb-server=1:10.10.2+maria~debunstable mariadb-client=1:10.10.2+maria~debunstable
- - *test-verify-initial
- - *test-full-upgrade
- - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
- - *test-verify-final
-
- mariadb.org-10.9 upgrade:
- extends: .salsa-ci-template-for-mariadb-upgrade
- stage: upgrade MariaDB variant
- variables:
- MARIADB_VERSION: "10.9"
- script:
- # this should not use Sid to begin with
- - apt-get install -qq --yes mariadb-server=1:10.9.4+maria~debunstable mariadb-client=1:10.9.4+maria~debunstable
++ MARIADB_VERSION: "11.7"
+ script:
- - *test-full-upgrade
++ - apt-get install -qq --yes mariadb-server
++ - dpkg -l | grep -e "mariadb-server.*11\.7"
+ - *test-verify-initial
- mariadb.org-10.8 upgrade:
++ - *test-install-all
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
- MARIADB_VERSION: "10.8"
++# archive.mariadb.org for Debian Sid latest is 11.4.5
++mariadb.org-11.4 upgrade:
+ extends: .salsa-ci-template-for-mariadb-upgrade
+ stage: upgrade MariaDB variant
+ variables:
- - apt-get install -qq --yes mariadb-server-10.8
++ MARIADB_VERSION: "11.4"
+ script:
- mariadb.org-10.7 upgrade:
++ - apt-get install -qq --yes mariadb-server
++ - dpkg -l | grep -e "mariadb-server.*11\.4"
+ - *test-verify-initial
+ - *test-install-all
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
- MARIADB_VERSION: "10.7"
++# archive.mariadb.org for Debian Sid latest is 10.11.8
++mariadb.org-10.11 upgrade:
+ extends: .salsa-ci-template-for-mariadb-upgrade
+ stage: upgrade MariaDB variant
+ variables:
- - apt-get install -qq --yes mariadb-server-10.7
++ MARIADB_VERSION: "10.11"
+ script:
- # Package libmariadbclient-dev from mariadb.org conflicts with libmariadb-dev in Sid, so cannot use wildcard that would include it
- # Enable this line when there is a way to install them only from the mariadb.org repo
++ - apt-get install -qq --yes mariadb-server
++ - dpkg -l | grep -e "mariadb-server.*10\.11"
+ - *test-verify-initial
+ - *test-install-all
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
++# archive.mariadb.org for Debian Sid latest is 10.6.12
+mariadb.org-10.6 upgrade:
+ extends: .salsa-ci-template-for-mariadb-upgrade
+ stage: upgrade MariaDB variant
+ variables:
+ MARIADB_VERSION: "10.6"
+ script:
- - apt-get install -qq --yes mariadb-server-10.6
++ # Enable this line when there mariadb-server-10.5 metapackage anymore in Sid
+ # - apt-get install -qq --yes 'mariadb*' libmariadb3 'libmariadb-*' 'libmariadbd*'
- - *test-install-openssl1-in-sid-for-backwards-compat
- - apt-get install -qq --yes mariadb-server-10.5
- - *test-verify-initial
- - *test-install-all
- - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
- - *test-verify-final
-
- # archive.mariadb.org for Debian Sid latest is 10.4.17
- mariadb.org-10.4 upgrade:
- extends: .salsa-ci-template-for-mariadb-upgrade
- stage: upgrade MariaDB variant
- variables:
- MARIADB_VERSION: "10.4"
- script:
- - *test-install-readline-in-sid-for-backwards-compat
- - *test-install-openssl1-in-sid-for-backwards-compat
- - *test-install-libaio-in-sid-for-backwards-compat
- - apt-get install -qq --yes mariadb-server-10.4
- # MariaDB.org version of 10.4 and early 10.5 do not install an init file, so
- # it must be installed here manually
- - cp /usr/share/mysql/mysql.init /etc/init.d/mysql; chmod +x /etc/init.d/mysql; service mysql start; sleep 5
- - *test-verify-initial
- - *test-install-all
- - sleep 5 # Give the mysql_upgrade a bit of time to complete before querying the server
- - service mysql status
- - service mariadb status
- - *test-verify-final
-
- # archive.mariadb.org for Debian Sid latest is 10.3.27
- mariadb.org-10.3 upgrade:
- extends: .salsa-ci-template-for-mariadb-upgrade
- stage: upgrade MariaDB variant
- variables:
- MARIADB_VERSION: "10.3"
- script:
- - *test-install-readline-in-sid-for-backwards-compat
- - *test-install-openssl1-in-sid-for-backwards-compat
- - *test-install-libaio-in-sid-for-backwards-compat
- - apt-get install -qq --yes mariadb-server-10.3
- - *test-verify-initial
- - *test-install-all
- # mariadb-10.3 in Buster ships a /etc/init.d/mysql and it continues to exist
- # after upgrade, and is removed only on purge
- - service mysql status || service mariadb status
- # Give the mariadb-upgrade plenty of time to complete, otherwise next commands
- # fail on non-existing mariadb.sys user
- - sleep 15
- - *test-verify-final
-
- # archive.mariadb.org for Debian Sid latest is 10.2.21
- mariadb.org-10.2 upgrade:
- extends: .salsa-ci-template-for-mariadb-upgrade
- stage: upgrade MariaDB variant
- variables:
- MARIADB_VERSION: "10.2"
- script:
- - *test-install-readline-in-sid-for-backwards-compat
- - *test-install-openssl1-in-sid-for-backwards-compat
- - *test-install-libaio-in-sid-for-backwards-compat
- - apt-get install -qq --yes mariadb-server-10.2
- # Verify initial state before upgrade
- - dpkg -l | grep -iE 'maria|mysql|galera' || true # List installed
- - service mysql status
- # prepending with --defaults-file=/etc/mysql/debian.cnf is needed in upstream 5.5–10.3
++ - apt-get install -qq --yes mariadb-server
++ - dpkg -l | grep -e "mariadb-server.*10\.6"
+ - *test-verify-initial
+ - *test-install-all
+ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
+# archive.mariadb.org for Debian Sid latest is 10.5.13
+mariadb.org-10.5 upgrade:
+ extends: .salsa-ci-template-for-mariadb-upgrade
+ stage: upgrade MariaDB variant
+ variables:
+ MARIADB_VERSION: "10.5"
+ script:
- mysql --defaults-file=/etc/mysql/debian.cnf --skip-column-names -e "SELECT @@version, @@version_comment"
- mysql --defaults-file=/etc/mysql/debian.cnf --table -e "SHOW DATABASES;"
- mysql --defaults-file=/etc/mysql/debian.cnf --table -e "SELECT * FROM mysql.user; SHOW CREATE USER root@localhost;"
- mysql --defaults-file=/etc/mysql/debian.cnf --table -e "SELECT * FROM mysql.plugin; SHOW PLUGINS;"
- - *test-install-all
- # mariadb-10.2 in ships a /etc/init.d/mysql and it continues to exist
- # after upgrade, and is removed only on purge
- - service mysql status || service mariadb status
- # Give the mariadb-upgrade plenty of time to complete, otherwise next commands
- # fail on non-existing mariadb.sys user
- - sleep 15
- - *test-verify-final
-
- # Buster is the last Debian release Oracle MySQL 5.7 offers binaries for
- mysql.com-5.7 with Buster upgrade:
- extends: .salsa-ci-template-for-mariadb
- stage: upgrade MariaDB variant
- needs:
- - job: build
- image: debian:buster
- script:
- - *test-prepare-container
++ # OpenSSL 1.1 was removed from Debian Sid in Dec 2022 as Bookworm will ship
++ # with OpenSSL 3.0 only. Use OpenSSL 1.1 from Debian snapshots to be able to
++ # install MariaDB binaries that depend on it.
+ - |
- apt-get install -qq --yes --no-install-recommends gpg gpg-agent dirmngr ca-certificates # Bare minimal (<4MB) for apt-key to work
- apt-key adv --recv-keys --keyserver hkps://keyserver.ubuntu.com:443 B7B3B788A8D3785C
- echo "deb https://repo.mysql.com/apt/debian/ buster mysql-5.7" > /etc/apt/sources.list.d/mysql.list
- apt-get update -qq
- - apt-get install -qq --yes mysql-server 'libmysqlc*'
- # Ensure MySQL 5.7 package actually got installed
- - dpkg -l | grep -e "mysql-server.*5.7"
++ apt-get -qq install --no-install-recommends --yes curl ca-certificates
++ curl -sLO https://snapshot.debian.org/archive/debian/20220507T034236Z/pool/main/o/openssl/libssl1.1_1.1.1o-1_amd64.deb
++ apt-get -qq install --no-install-recommends --yes ./libssl1.1_1.1.1o-1_amd64.deb
++ # Package libaio1 was replaced by libaio1t64 in Debian Sid in April 2024.
++ # Use libaio1 from Debian snapshots to be able to install MariaDB binaries
++ # that depend on it.
+ - |
- - *test-enable-sid-repos
++ curl -sLO https://snapshot.debian.org/archive/debian/20240331T210805Z/pool/main/liba/libaio/libaio1_0.3.113-5_amd64.deb
++ apt-get -qq install --no-install-recommends --yes ./libaio1_0.3.113-5_amd64.deb
++ - apt-get install -qq --yes mariadb-server
+ - *test-verify-initial
- # Due to some (currently unknown) changes in MySQL 5.7 packaging or apt
- # behaviour changes, a system with a previous installation of MySQL will
- # on upgrades to MariaDB first fully remove MySQL, including the
- # /etc/init.d/mysql file, so previous techniques in
- # mariadb-server-10.6.postinst to maintain backwards compatibility with
- # 'service mysql status' after installing MariaDB on top MySQL no longer
- # works. Thus the step to test it now intentionally has a fallback to use
- # the service name 'mariadb' instead, and the fallback is always used.
- - sleep 5 # Give the mysql_upgrade a bit of time to complete before querying the server
- - service mysql status || service mariadb status
- - sleep 15 # Give the mysql_upgrade a bit of extra time to complete with MySQL 5.7 before querying the server
+ - *test-install-all
- - |
- apt-get install -qq --yes --no-install-recommends ca-certificates curl systemctl
- curl -sS "https://keyserver.ubuntu.com/pks/lookup?op=get&search=0x9334A25F8507EFA5" -o /etc/apt/trusted.gpg.d/percona.asc
- echo "deb https://repo.percona.com/apt/ bookworm main" > /etc/apt/sources.list.d/percona.list
- apt-get update -qq
++ - service mariadb status # There is no init.d/mysql in MariaDB 10.5+
+ - *test-verify-final
+
+# Note: pmm2-client does not exist in the Bookworm repository anymore
+percona-xtradb-5.7 with Bookworm upgrade:
+ extends: .salsa-ci-template-for-mariadb
+ stage: upgrade MariaDB variant
+ image: debian:bookworm
+ script:
+ - *test-prepare-container
++ - apt-get install -qq --yes --no-install-recommends ca-certificates
++ - echo "deb https://repo.percona.com/apt/ bookworm main" > /etc/apt/sources.list.d/percona.list
++ - apt-get update -qq
+ - apt-get install -qq --yes percona-xtradb-cluster-full-57 percona-xtrabackup-24 percona-toolkit
+ # Ensure Percona 5.7 package actually got installed
+ - dpkg -l | grep -e "percona.*5\.7"
+ - service mysql status
+ - *test-verify-initial
+ - *test-enable-sid-repos
+ - *test-install-all
+ # Percona package owned /etc/init.d/mysql, so on removal and upgrade to MariaDB old service name can't be referenced anymore
+ - service mariadb status
+ - sleep 15 # Give the mysql_upgrade a bit of extra time to complete with MySQL 5.7 before querying the server
+ - *test-verify-final
--- /dev/null
- 3.0 (native)
++3.0 (quilt)
--- /dev/null
- # This compat version is needed to use to support older version
- mariadb source: package-uses-deprecated-debhelper-compat-version 9
- # Necessary for drop-in-place-replacement upgrades on mysql-server/-client
- # since package breaks/replaces these but at the same time also provides them
- # New Lintian syntax (from version 2.115)
++# Intentional control relationships
++version-substvar-for-external-package Replaces ${source:Version} libmariadb-dev -> libmysqld-dev *
++# Do not alert for documentation in html
+source-is-missing [sql/share/charsets/languages.html]
++source-is-missing [storage/columnstore/columnstore/utils/libmarias3/libmarias3/docs/_themes/sphinx_rtd_theme/static/js/badge_only.js]
++source-is-missing [storage/columnstore/columnstore/utils/libmarias3/libmarias3/docs/_themes/sphinx_rtd_theme/static/js/theme.js]
++source-is-missing [storage/maria/libmarias3/docs/_themes/sphinx_rtd_theme/static/js/badge_only.js]
++source-is-missing [storage/maria/libmarias3/docs/_themes/sphinx_rtd_theme/static/js/theme.js]
+source-is-missing [storage/rocksdb/rocksdb/docs/_includes/footer.html]
- missing-build-dependency-for-dh-addon systemd (does not satisfy debhelper:any (>= 9.20160709~) | debhelper-compat:any | dh-sequence-systemd:any | dh-systemd:any) [debian/rules]
- # Should in some point reviewd what should we done
- dependency-is-not-multi-archified libmariadb-dev-compat depends on libmariadb-dev (multi-arch: no)
- dependency-is-not-multi-archified mariadb-plugin-gssapi-client depends on mariadb-client (multi-arch: no)
- # These are for purpose
- version-substvar-for-external-package Replaces ${source:Version} libmariadb-dev -> libmysqlclient-dev [debian/control:*]
- version-substvar-for-external-package Replaces ${source:Version} libmariadb-dev -> libmysqld-dev [debian/control:*]
- version-substvar-for-external-package Replaces ${source:Version} libmariadbd-dev -> libmariadbclient-dev [debian/control:*]
-
- # These are there for purpose
++# Data or test files where long lines are justified
++very-long-line-length-in-source-file * [*.expected:*]
++very-long-line-length-in-source-file * [*.result:*]
++very-long-line-length-in-source-file * [*.test:*]
++very-long-line-length-in-source-file * [BUILD/compile-*]
++# These are mainly found under extra/wolfssl
++very-long-line-length-in-source-file * [*.cproject:*]
++very-long-line-length-in-source-file * [*.launch:*]
++very-long-line-length-in-source-file * [*.md:*]
++very-long-line-length-in-source-file * [*.scfg:*]
++very-long-line-length-in-source-file * [extra/wolfssl/wolfssl/.codespellexcludelines:*]
++very-long-line-length-in-source-file * [extra/wolfssl/wolfssl/certs/renewcerts/wolfssl.cnf:*]
++very-long-line-length-in-source-file * [extra/wolfssl/wolfssl/certs/test/cert-over-max-nc.cfg:*]
++very-long-line-length-in-source-file * [extra/wolfssl/wolfssl/doc/dox_comments/header_files-ja/ssl.h:*]
++very-long-line-length-in-source-file * [extra/wolfssl/wolfssl/doc/dox_comments/header_files-ja/types.h:*]
++very-long-line-length-in-source-file * [extra/wolfssl/wolfssl/doc/dox_comments/header_files-ja/wolfio.h:*]
++very-long-line-length-in-source-file * [extra/wolfssl/wolfssl/doc/formats/html/html_changes/tabs.css:*]
++very-long-line-length-in-source-file * [extra/wolfssl/wolfssl/IDE/Espressif/ESP-IDF/test/test_wolfssl.c:*]
++very-long-line-length-in-source-file * [extra/wolfssl/wolfssl/IDE/IAR-MSP430/main.c:*]
++# Preprocessed C files which have long lines
++very-long-line-length-in-source-file * [extra/wolfssl/wolfssl/wolfcrypt/src/*.i:*]
++# These are all results for test cases and similar so they can be
++# especially formatted to be too long
++very-long-line-length-in-source-file * [mysql-test/*.dump:*]
++very-long-line-length-in-source-file * [mysql-test/*.inc:*]
++very-long-line-length-in-source-file * [mysql-test/*.rdiff:*]
++very-long-line-length-in-source-file * [mysql-test/*.txt:*]
++very-long-line-length-in-source-file * [mysql-test/*.weekly:*]
++very-long-line-length-in-source-file * [mysql-test/suite/parts/r/*.out:*]
++# SQL source file that has very long inserts/selects
++very-long-line-length-in-source-file * [scripts/fill_help_tables.sql:*]
++very-long-line-length-in-source-file * [scripts/mariadb_system_tables.sql:*]
++# Machine formatted HTML
++very-long-line-length-in-source-file * [sql/share/charsets/languages.html:*]
++very-long-line-length-in-source-file * [sql/share/errmsg-utf8.txt:*]
++# Very long test string
++very-long-line-length-in-source-file * [storage/archive/archive_test.c:*]
++# ColumnStore ignores
++# In Directory mysql-test are some long test includes
++very-long-line-length-in-source-file * [storage/columnstore/columnstore/.drone.jsonnet:*]
++very-long-line-length-in-source-file * [storage/columnstore/columnstore/*.xmi:*]
++very-long-line-length-in-source-file * [storage/columnstore/columnstore/dbcon/doc/q19_plan.txt:*]
++very-long-line-length-in-source-file * [storage/columnstore/columnstore/mysql-test/columnstore/include/autopilot_create_datatypetestm_tables.inc:*]
++very-long-line-length-in-source-file * [storage/columnstore/columnstore/mysql-test/columnstore/include/autopilot_create_datatypeupdate_table.inc:*]
++very-long-line-length-in-source-file * [storage/columnstore/columnstore/mysql-test/columnstore/include/enable_rbo_parallel_ces.inc:*]
++very-long-line-length-in-source-file * [storage/columnstore/columnstore/utils/json/json.hpp:*]
++very-long-line-length-in-source-file * [storage/columnstore/columnstore/utils/udfsdk/docs/source/reference/mcsv1Context.rst:*]
++# Minified CSS files used in documentation
++very-long-line-length-in-source-file * [*badge_only.css:*]
++very-long-line-length-in-source-file * [*theme.css:*]
++# Minified JS files used in documentation
++very-long-line-length-in-source-file * [*badge_only.js:*]
++very-long-line-length-in-source-file * [*theme.js:*]
++source-contains-prebuilt-javascript-object [*badge_only.js]
++source-contains-prebuilt-javascript-object [*theme.js]
++# Font files
++# General storage ignores
++very-long-line-length-in-source-file * [storage/rocksdb/mysql-test/rocksdb/t/bypass_select_basic_bloom-master.opt:*]
++very-long-line-length-in-source-file * [storage/rocksdb/mysql-test/rocksdb/t/type_enum.inc:*]
++very-long-line-length-in-source-file * [storage/rocksdb/mysql-test/rocksdb/t/type_set.inc:*]
++very-long-line-length-in-source-file * [storage/rocksdb/rocksdb/docs/_includes/footer.html:*]
++very-long-line-length-in-source-file * [storage/rocksdb/rocksdb/docs/_posts/*.markdown:*]
++very-long-line-length-in-source-file * [storage/spider/mysql-test/spider/bugfix/include/sql_mode_init.inc:*]
++# These are generated files which should not make any harm
++source-contains-autogenerated-visual-c++-file [extra/wolfssl/wolfssl/IDE/WIN-SRTP-KDF-140-3/resource.h]
++source-contains-autogenerated-visual-c++-file [extra/wolfssl/wolfssl/IDE/WIN-SRTP-KDF-140-3/wolfssl-fips.rc]
+source-contains-autogenerated-visual-c++-file [extra/wolfssl/wolfssl/IDE/WIN10/resource.h]
+source-contains-autogenerated-visual-c++-file [extra/wolfssl/wolfssl/IDE/WIN10/wolfssl-fips.rc]
+source-contains-autogenerated-visual-c++-file [extra/wolfssl/wolfssl/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/dbcon/ddlpackageproc/libddlpackageproc.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/dbcon/ddlpackageproc/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/dbcon/dmlpackageproc/libdmlpackageproc.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/dbcon/dmlpackageproc/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/dbcon/joblist/libjoblist.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/dbcon/joblist/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/ddlproc/DDLProc.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/ddlproc/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/dmlproc/DMLProc.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/dmlproc/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/exemgr/ExeMgr.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/exemgr/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/oam/oamcpp/liboamcpp.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/oam/oamcpp/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/primitives/primproc/PrimProc.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/primitives/primproc/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/tools/dbloadxml/colxml.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/tools/dbloadxml/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/utils/configcpp/libconfigcpp.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/utils/configcpp/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/utils/udfsdk/libudf_mysql.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/utils/udfsdk/libudfsdk.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/utils/udfsdk/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/utils/winport/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/utils/winport/winfinidb.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/versioning/BRM/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/writeengine/bulk/cpimport.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/writeengine/bulk/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/writeengine/libwriteengine.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/writeengine/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/writeengine/server/WriteEngineServer.rc]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/writeengine/server/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/writeengine/splitter/resource.h]
- source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/writeengine/splitter/splitter.rc]
++source-contains-autogenerated-visual-c++-file [storage/columnstore/columnstore/*.h]
+source-contains-autogenerated-visual-c++-file [win/upgrade_wizard/resource.h]
+source-contains-autogenerated-visual-c++-file [win/upgrade_wizard/upgrade.rc]
-
- # These are needed for testing
- source-contains-prebuilt-java-object [storage/connect/mysql-test/connect/std_data/JavaWrappers.jar]
- source-contains-prebuilt-java-object [storage/connect/mysql-test/connect/std_data/JdbcMariaDB.jar]
- source-contains-prebuilt-java-object [storage/connect/mysql-test/connect/std_data/Mongo2.jar]
- source-contains-prebuilt-java-object [storage/connect/mysql-test/connect/std_data/Mongo3.jar]
++# Known cases, pending to be fixed upstream
++very-long-line-length-in-source-file * [libmariadb/benchmark/main-benchmark.cc:*]
++very-long-line-length-in-source-file * [man/mariadb.1:*]
++very-long-line-length-in-source-file * [scripts/msql2mysql.sh:*]
++very-long-line-length-in-source-file * [scripts/wsrep_sst_mysqldump.sh:*]
++very-long-line-length-in-source-file * [storage/columnstore/columnstore/utils/windowfunction/windowfunctiontype.cpp:*]
++very-long-line-length-in-source-file * [strings/ctype-czech.c:*]
--- /dev/null
--- /dev/null
++#!/bin/sh
++# shellcheck disable=SC2086
++#
++# dep8 smoke test for mariadbd
++# Author: Otto Kekäläinen <otto@debian.org>
++#
++# This test should be declared in debian/tests/control with a dependency
++# on the package that provides a configured MariaDB server (eg.
++# mariadb-server).
++#
++# This test should be declared in debian/tests/control with the
++# following restrictions:
++# - needs-root (binaries in /usr/sbin need root to run)
++# - allow-stderr (set -x always outputs to stderr, also if mariadbd was not
++# launched as a service it will complain that mysql.plugin table is empty)
++#
++# This test prints out various configuration information from mariadbd and
++# compares the result to expected values in original binary/build.
++#
++
++MARIADB_CLIENT_PATH="${MARIADB_CLIENT_PATH:-/usr/bin}"
++MARIADB_SERVER_PATH="${MARIADB_SERVER_PATH:-/usr/sbin}"
++
++normalize_value() {
++ VARIABLE="$1"
++ VALUE="$2"
++ # In sed the '\s.*' will match whitespace followed by any other chars until end of line
++ sed "s/^$VARIABLE\(\s\s*\).*$/$VARIABLE\1$VALUE/" -i "$TEMPFILE"
++}
++
++trace() {
++ TRACE_NAME="$(basename "$*" | sed 's/ //g' | sed 's/--/-/g')"
++
++ # Show in test what was run
++ echo
++ echo "Tracing: $*"
++
++ # shellcheck disable=SC2068
++ $@ > "$TRACE_NAME.actual"
++
++ # Normalize contents for know special case
++ if echo "$*" | grep -q verbose
++ then
++ TEMPFILE="$(mktemp)"
++ # Use 'tail' to skip first line that has version and architecture strings which
++ # we intentionally do not want to include in the trace file.
++ tail -n +2 "$TRACE_NAME.actual" > "$TEMPFILE"
++
++ # Hostname varies one very machine
++ sed "s/$(hostname)/HOSTNAME/g" -i "$TEMPFILE"
++
++ # SSL library version inherited form dependency, not relevant for tracing
++ # the correctness of the MariaDB build itself
++ sed 's/OpenSSL 3.*/SSL-VERSION/' -i "$TEMPFILE"
++
++ # Normalize values that depend on build environment
++ normalize_value system-time-zone UTC # depends on OS environment
++ normalize_value open-files-limit 32000 # depends on OS environment
++ normalize_value thread-pool-size 2 # depends on CPU cores available
++ normalize_value version-compile-machine ARCH # x86_64, aarch64, armv7l ..
++
++ # armhf/armel might have: debian-linux-gnueabi, debian-linux-gnueabihf
++ normalize_value version-compile-os debian-linux-gnu
++
++ # Version strings and compilation comment contents may change on every
++ # release and build on different Debian/Ubuntu releases and architectures
++ normalize_value version "VERSION"
++ normalize_value version-comment "VERSION-COMMENT"
++
++ # Inherits git commit id from latest upstream release and thus not constant
++ normalize_value version-source-revision -
++
++ # 32-bit systems (i386, armel, armhf) have lower values
++ normalize_value innodb-io-capacity-max 18446744073709551615 # 32-bit: 4294967295
++ normalize_value max-binlog-cache-size 18446744073709547520 # 32-bit: 4294963200
++ normalize_value max-binlog-stmt-cache-size 18446744073709547520 # 32-bit: 4294963200
++ normalize_value myisam-max-sort-file-size 18446744073709551615 # 32-bit: 2146435072
++ normalize_value myisam-mmap-size 9223372036853727232 # 32-bit: 4294967295
++ normalize_value quick-max-column-width 9223372036854775807 # 32-bit: 2147483647
++ normalize_value tmp-disk-table-size 18446744073709551615 # 32-bit: 4294967295
++
++ # ppc64el has larger default value: 393216
++ normalize_value log-tc-size 24576
++
++ # feedback plugin submitter identifier is random
++ normalize_value server-uid 1234567890abcdefghijklmnopq=
++
++ # wsrep-provider exists twice as a system variable: both to control if
++ # plugin is on or off, and to define the path to the plugin. As according to
++ # https://mariadb.com/kb/en/galera-cluster-system-variables/#wsrep_provider)
++ # defining the path is the documented on, clean away the ON/OFF flag from
++ # causing issues in tracing:
++ sed '/wsrep-provider\s\+ON/d' -i "$TEMPFILE"
++ sed '/^ --wsrep-provider\[=name\]/,/^[[:blank:]]\+be uninstalled/d' -i "$TEMPFILE"
++
++ mv "$TEMPFILE" "$TRACE_NAME.actual"
++ fi
++
++ echo "diff --ignore-space-change -u $TRACE_NAME.expected $TRACE_NAME.actual"
++ # Validate that trace file in source code matches tested
++ if ! diff --ignore-space-change -u "$TRACE_NAME.expected" "$TRACE_NAME.actual"
++ then
++ echo "Error: Output from '$*' did NOT match what was expected"
++ echo
++ echo "If the change is intentional, update the debian/tests/traces to match"
++ echo "the new values and document change to users in mariadb-server.NEWS"
++
++ if [ -n "$ERRORS" ]
++ then
++ ERRORS="$ERRORS, $TRACE_NAME"
++ else
++ ERRORS="$TRACE_NAME"
++ fi
++ fi
++}
++
++TEST_DIR="$(dirname "$(realpath "$0")")"
++echo "Running test 'configuration-tracing' at $TEST_DIR"
++cd $TEST_DIR/traces || exit 1
++
++set -e
++
++ERRORS=""
++
++# Dump out what parameters mariadb would be called with by default
++trace $MARIADB_CLIENT_PATH/mariadb --print-defaults
++
++# Dump out all help texts, client variables and their default values
++trace $MARIADB_CLIENT_PATH/mariadb --verbose --help
++
++# Dump out what parameters mariadbd would be called with by default on system
++trace $MARIADB_SERVER_PATH/mariadbd --print-defaults
++
++# Dump out all help texts, server variables and their default values
++trace $MARIADB_SERVER_PATH/mariadbd --verbose --help
++
++# Emit non-zero exit code if there was errors
++if [ -n "$ERRORS" ]
++then
++ echo "Error: mismatch in $ERRORS"
++ exit 1
++fi
--- /dev/null
- Tests: smoke
- # RocksDB is not built for all archs. Rather than duplicating the condition
- # for its existence (see the list in debian/control), install it if available
- # and check in the test if it's functional when it should be.
- # The plugin package also already depends on the other one.
- Depends: mariadb-plugin-provider-bzip2,
- mariadb-plugin-provider-lz4,
- mariadb-plugin-provider-lzma,
- mariadb-plugin-provider-lzo,
- mariadb-plugin-provider-snappy,
- mariadb-plugin-rocksdb | mariadb-server
- Restrictions: allow-stderr needs-root isolation-container
++Tests:
++ configuration-tracing,
++Depends:
++ diffutils,
++ mariadb-server,
++Restrictions:
++ allow-stderr,
++ needs-root,
+
- Tests: upstream
- Depends: eatmydata,
- mariadb-test
- Restrictions: allow-stderr breaks-testbed
++Tests:
++ smoke,
++Depends:
++ mariadb-plugin-provider-bzip2,
++ mariadb-plugin-provider-lz4,
++ mariadb-plugin-provider-lzma,
++ mariadb-plugin-provider-lzo,
++ mariadb-plugin-provider-snappy,
++ mariadb-plugin-rocksdb [amd64 arm64 mips64el ppc64el riscv64 loong64],
++ mariadb-server,
++Restrictions:
++ allow-stderr,
++ isolation-container,
++ needs-root,
++
++Tests:
++ upstream,
++Depends:
++ eatmydata,
++ mariadb-test,
++Restrictions:
++ allow-stderr,
++ breaks-testbed,
--- /dev/null
- mysql <<EOT
+#!/bin/sh
+# dep8 smoke test for mysql-server
+# Author: Robie Basak <robie.basak at canonical.com>
+#
+# This test should be declared in debian/tests/control with a dependency
+# on the package that provides a configured MariaDB server (eg.
+# mariadb-server).
+#
+# This test should be declared in debian/tests/control with the
+# following restrictions:
+# - allow-stderr (set -x always outputs to stderr)
+# - needs-root (to be able to log into the database)
+# - isolation-container (to be able to start service)
+#
+# This test:
+#
+# 1) Creates a test database and test user as the root user.
+#
+# 2) Creates a test table and checks it appears to operate normally
+# using the test user and test database.
+#
+# 3) Checks compression support for InnoDB & RocksDB engine.
+
+echo "Running test 'smoke'"
+set -ex
+
+# Start the daemon if it was not running. For example in Docker testing
+# environments there might not be any systemd et al and the service needs to
+# be started manually.
+if ! command -v systemctl
+then
+ if ! /etc/init.d/mariadb status
+ then
+ echo "Did not find systemctl and daemon was not running, starting it.."
+ /etc/init.d/mariadb start
+ fi
+else
+ # If systemd (and systemctl) is available, but the service did not start, then
+ # this smoke test is supposed to fail if next commands don't work.
+ echo "Found systemctl, continuing smoke test.."
+ # Compression plugins are separated from main server package
+ # to own packages (for example LZ4 package mariadb-plugin-provider-lz4)
+ # and they are installed after mariadb-server.
+ # which means that they don't exist if MariaDB is not restarted
+ systemctl restart mariadb
+fi
+
- mysql testdatabase <<EOT
++mariadb <<EOT
+CREATE DATABASE testdatabase;
+CREATE USER 'testuser'@'localhost' identified by 'testpassword';
+GRANT ALL ON testdatabase.* TO 'testuser'@'localhost';
+EOT
+
- result=$(echo 'SELECT bar+1 FROM foo;'|mysql --batch --skip-column-names --user=testuser --password=testpassword testdatabase)
++mariadb testdatabase <<EOT
+CREATE TABLE foo (bar INTEGER);
+INSERT INTO foo (bar) VALUES (41);
+EOT
+
- mysql --user=testuser --password=testpassword testdatabase <<EOT
++result=$(echo 'SELECT bar+1 FROM foo;' | mariadb --batch --skip-column-names --user=testuser --password=testpassword testdatabase)
+if [ "$result" != "42" ]
+then
+ echo "Unexpected result" >&2
+ exit 1
+fi
+
- mysql <<EOT
++mariadb --user=testuser --password=testpassword testdatabase <<EOT
+DROP TABLE foo;
+EOT
+
++mariadb <<EOT
+DROP DATABASE testdatabase;
+DROP USER 'testuser'@'localhost';
+EOT
+
+# This will never fail but exists purely for debugging purposes in case a later
+# step would fail
+mariadb <<EOT
+SHOW GLOBAL STATUS WHERE Variable_name LIKE 'Innodb_have_%';
+EOT
+
+mariadb <<EOT
+SET GLOBAL innodb_compression_algorithm=lz4;
+SET GLOBAL innodb_compression_algorithm=lzo;
+SET GLOBAL innodb_compression_algorithm=lzma;
+SET GLOBAL innodb_compression_algorithm=bzip2;
+SET GLOBAL innodb_compression_algorithm=snappy;
+SET GLOBAL innodb_compression_algorithm=zlib;
+SET GLOBAL innodb_compression_algorithm=none;
+EOT
+
+# Check whether RocksDB should be installed or not
+plugin=mariadb-plugin-rocksdb
+if [ "$(dpkg-architecture -qDEB_HOST_ARCH_BITS)" != 32 ] &&
+ [ "$(dpkg-architecture -qDEB_HOST_ARCH_ENDIAN)" = little ]
+then
+ dpkg-query -W $plugin
+
+ LOG=/var/lib/mysql/#rocksdb/LOG
+ # XXX: The server may only be started during the install of
+ # mariadb-server, which happens before that of the plugin.
+ [ -e $LOG ] || mariadb -e "INSTALL PLUGIN RocksDB SONAME 'ha_rocksdb';"
+ # XXX: rocksdb_supported_compression_types variable does not report ZSTD.
+
+ # Print RocksDB supported items so test log is easier to debug
+ grep -F " supported:" $LOG
+
+ # Check that the expected compression methods are supported
+ for a in LZ4 Snappy Zlib ZSTD
+ do
+ if ! grep -qE "k$a(Compression)? supported: 1" $LOG
+ then
+ # Fail with explicit error message
+ echo "Error: Compression method $a not supported by RocksDB!" >&2
+ exit 1
+ fi
+ done
+else
+ if dpkg-query -W $plugin
+ then
+ echo "Error: Plugin $plugin was found even though it should not exist on a 32-bit and little-endian system"
+ exit 1
+ fi
+fi
--- /dev/null
--- /dev/null
++/usr/bin/mariadb would have been started with the following arguments:
++--socket=/run/mysqld/mysqld.sock
--- /dev/null
--- /dev/null
++Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.
++
++Usage: /usr/bin/mariadb [OPTIONS] [database]
++
++Default options are read from the following files in the given order:
++/etc/my.cnf /etc/mysql/my.cnf ~/.my.cnf
++The following groups are read: mysql mariadb-client client client-server client-mariadb
++The following options may be given as the first argument:
++--print-defaults Print the program argument list and exit.
++--no-defaults Don't read default options from any option file.
++The following specify which files/extra groups are read (specified before remaining options):
++--defaults-file=# Only read default options from the given file #.
++--defaults-extra-file=# Read this file after the global files are read.
++--defaults-group-suffix=# Additionally read default groups with # appended as a suffix.
++
++ -?, --help Display this help and exit.
++ -I, --help Synonym for -?
++ --abort-source-on-error
++ Abort 'source filename' operations in case of errors
++ --auto-rehash Enable automatic rehashing. One doesn't need to use
++ 'rehash' to get table and field completion, but startup
++ and reconnecting may take a longer time.
++ (Defaults to on; use --skip-auto-rehash to disable.)
++ -A, --no-auto-rehash
++ No automatic rehashing. One has to use 'rehash' to get
++ table and field completion. This gives a quicker start of
++ mysql and disables rehashing on reconnect.
++ --auto-vertical-output
++ Automatically switch to vertical output mode if the
++ result is wider than the terminal width.
++ -B, --batch Don't use history file. Disable interactive behavior.
++ (Enables --silent.)
++ --binary-as-hex Print binary data as hex
++ --binary-mode Binary mode allows certain character sequences to be
++ processed as data that would otherwise be treated with a
++ special meaning by the parser. Specifically, this switch
++ turns off parsing of all client commands except \C and
++ DELIMITER in non-interactive mode (i.e., when binary mode
++ is combined with either 1) piped input, 2) the --batch
++ mysql option, or 3) the 'source' command). Also, in
++ binary mode, occurrences of '\r\n' and ASCII '\0' are
++ preserved within strings, whereas by default, '\r\n' is
++ translated to '\n' and '\0' is disallowed in user input.
++ --character-sets-dir=name
++ Directory for character set files.
++ --column-names Write column names in results.
++ (Defaults to on; use --skip-column-names to disable.)
++ -N, --skip-column-names
++ Don't write column names in results.
++ --column-type-info Display column type information.
++ -c, --comments Preserve comments. Send comments to the server. The
++ default is --skip-comments (discard comments), enable
++ with --comments.
++ -C, --compress Use compression in server/client protocol.
++ --connect-expired-password
++ Notify the server that this client is prepared to handle
++ expired password sandbox mode even if --batch was
++ specified.
++ --connect-timeout=# Number of seconds before connection timeout.
++ -D, --database=name Database to use.
++ -#, --debug[=#] This is a non-debug version. Catch this and exit.
++ --debug-check Check memory and open file usage at exit.
++ -T, --debug-info Print some debug info at exit.
++ --default-auth=name Default authentication client-side plugin to use.
++ --default-character-set=name
++ Set the default character set.
++ --delimiter=name Delimiter to be used.
++ --enable-cleartext-plugin
++ Obsolete option. Exists only for MySQL compatibility.
++ -e, --execute=name Execute command and quit. (Disables --force and history
++ file.)
++ -f, --force Continue even if we get an SQL error. Sets
++ abort-source-on-error to 0
++ -h, --host=name Connect to host. Defaults in the following order:
++ $MARIADB_HOST, $MYSQL_HOST, and then localhost
++ -H, --html Produce HTML output.
++ -i, --ignore-spaces Ignore space after function names.
++ --init-command=name SQL Command to execute when connecting to MariaDB server.
++ Will automatically be re-executed when reconnecting.
++ --line-numbers Write line numbers for errors.
++ (Defaults to on; use --skip-line-numbers to disable.)
++ -L, --skip-line-numbers
++ Don't write line number for errors.
++ --local-infile Enable LOAD DATA LOCAL INFILE.
++ --max-allowed-packet=#
++ The maximum packet length to send to or receive from
++ server.
++ --max-join-size=# Automatic limit for rows in a join when using
++ --safe-updates.
++ -G, --named-commands
++ Enable named commands. Named commands mean this program's
++ internal commands; see mysql> help . When enabled, the
++ named commands can be used from any line of the query,
++ otherwise only from the first line, before an enter.
++ Disable with --disable-named-commands. This option is
++ disabled by default.
++ --net-buffer-length=#
++ The buffer size for TCP/IP and socket communication.
++ -b, --no-beep Turn off beep on error.
++ -o, --one-database Ignore statements except those that occur while the
++ default database is the one named at the command line.
++ --pager[=name] Pager to use to display results. If you don't supply an
++ option, the default pager is taken from your ENV variable
++ PAGER. Valid pagers are less, more, cat [> filename],
++ etc. See interactive help (\h) also. This option does not
++ work in batch mode. Disable with --disable-pager. This
++ option is disabled by default.
++ -p, --password[=name]
++ Password to use when connecting to server. If password is
++ not given it's asked from the tty.
++ --plugin-dir=name Directory for client-side plugins.
++ -P, --port=# Port number to use for connection or 0 for default to, in
++ order of preference, my.cnf, $MYSQL_TCP_PORT,
++ /etc/services, built-in default (3306).
++ --print-query-on-error
++ Print the query if there was an error. Is only enabled in
++ --batch mode if verbose is not set (as then the query
++ would be printed anyway)
++ (Defaults to on; use --skip-print-query-on-error to disable.)
++ --progress-reports Get progress reports for long running commands (like
++ ALTER TABLE)
++ (Defaults to on; use --skip-progress-reports to disable.)
++ --prompt=name Set the command line prompt to this value.
++ --protocol=name The protocol to use for connection (tcp, socket, pipe).
++ -q, --quick Don't cache result, print it row by row. This may slow
++ down the server if the output is suspended. Doesn't use
++ history file.
++ --quick-max-column-width=#
++ Maximum number of characters displayed in a column header
++ when using --quick
++ -r, --raw Write fields without conversion. Used with --batch.
++ --reconnect Reconnect if the connection is lost.
++ (Defaults to on; use --skip-reconnect to disable.)
++ -U, --safe-updates Only allow UPDATE and DELETE that uses keys.
++ -U, --i-am-a-dummy Synonym for option --safe-updates, -U.
++ --sandbox Disallow commands that access the file system (except \P
++ without an argument and \e).
++ --secure-auth Refuse client connecting to server if it uses old
++ (pre-4.1.1) protocol.
++ --select-limit=# Automatic limit for SELECT when using --safe-updates.
++ --server-arg=name Send embedded server this as a parameter.
++ --show-query-costs Show query cost after every statement.
++ --show-warnings Show warnings after every statement.
++ --sigint-ignore Ignore SIGINT (CTRL-C).
++ -s, --silent Be more silent. Print results with a tab as separator,
++ each row on new line.
++ -S, --socket=name The socket file to use for connection.
++ --ssl Enable SSL for connection (automatically enabled with
++ other flags).
++ (Defaults to on; use --skip-ssl to disable.)
++ --ssl-ca=name CA file in PEM format (check OpenSSL docs, implies
++ --ssl).
++ --ssl-capath=name CA directory (check OpenSSL docs, implies --ssl).
++ --ssl-cert=name X509 cert in PEM format (implies --ssl).
++ --ssl-cipher=name SSL cipher to use (implies --ssl).
++ --ssl-key=name X509 key in PEM format (implies --ssl).
++ --ssl-crl=name Certificate revocation list (implies --ssl).
++ --ssl-crlpath=name Certificate revocation list path (implies --ssl).
++ --tls-version=name TLS protocol version for secure connection.
++ --ssl-fp=name Server certificate fingerprint (implies --ssl).
++ --ssl-fplist=name File with accepted server certificate fingerprints, one
++ per line (implies --ssl).
++ --ssl-verify-server-cert
++ Verify server's certificate to prevent man-in-the-middle
++ attacks
++ (Defaults to on; use --skip-ssl-verify-server-cert to disable.)
++ -t, --table Output in table format.
++ --tee=name Append everything into outfile. See interactive help (\h)
++ also. Does not work in batch mode. Disable with
++ --disable-tee. This option is disabled by default.
++ -n, --unbuffered Flush buffer after each query.
++ -u, --user=name User for login if not current user.
++ -v, --verbose Write more. (-v -v -v gives the table output format).
++ -V, --version Output version information and exit.
++ -E, --vertical Print the output of a query (rows) vertically.
++ -w, --wait Wait and retry if connection is down.
++ -X, --xml Produce XML output.
++
++Variables (--variable-name=value)
++and boolean options {FALSE|TRUE} Value (after reading options)
++--------------------------------- ----------------------------------------
++abort-source-on-error FALSE
++auto-rehash TRUE
++auto-vertical-output FALSE
++binary-as-hex FALSE
++binary-mode FALSE
++character-sets-dir (No default value)
++column-names TRUE
++column-type-info FALSE
++comments FALSE
++compress FALSE
++connect-expired-password FALSE
++connect-timeout 0
++database (No default value)
++debug-check FALSE
++debug-info FALSE
++default-auth (No default value)
++default-character-set auto
++delimiter ;
++force FALSE
++host (No default value)
++html FALSE
++ignore-spaces FALSE
++init-command (No default value)
++line-numbers TRUE
++local-infile FALSE
++max-allowed-packet 16777216
++max-join-size 1000000
++named-commands FALSE
++net-buffer-length 16384
++no-beep FALSE
++plugin-dir (No default value)
++port 0
++print-query-on-error TRUE
++progress-reports TRUE
++prompt \N [\d]>
++protocol
++quick FALSE
++quick-max-column-width 9223372036854775807
++raw FALSE
++reconnect TRUE
++safe-updates FALSE
++i-am-a-dummy FALSE
++sandbox FALSE
++secure-auth FALSE
++select-limit 1000
++show-query-costs FALSE
++show-warnings FALSE
++sigint-ignore FALSE
++socket /run/mysqld/mysqld.sock
++ssl TRUE
++ssl-ca (No default value)
++ssl-capath (No default value)
++ssl-cert (No default value)
++ssl-cipher (No default value)
++ssl-key (No default value)
++ssl-crl (No default value)
++ssl-crlpath (No default value)
++tls-version (No default value)
++ssl-fp (No default value)
++ssl-fplist (No default value)
++ssl-verify-server-cert TRUE
++table FALSE
++unbuffered FALSE
++user (No default value)
++vertical FALSE
++xml FALSE
--- /dev/null
--- /dev/null
++/usr/sbin/mariadbd would have been started with the following arguments:
++--socket=/run/mysqld/mysqld.sock --pid-file=/run/mysqld/mysqld.pid --basedir=/usr --bind-address=127.0.0.1 --expire_logs_days=10
--- /dev/null
--- /dev/null
++Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.
++
++Starts the MariaDB database server.
++
++Usage: /usr/sbin/mariadbd [OPTIONS]
++
++Default options are read from the following files in the given order:
++/etc/my.cnf /etc/mysql/my.cnf ~/.my.cnf
++The following groups are read: mysqld server mysqld-11.8 mariadb mariadb-11.8 mariadbd mariadbd-11.8 client-server galera
++The following options may be given as the first argument:
++--print-defaults Print the program argument list and exit.
++--no-defaults Don't read default options from any option file.
++The following specify which files/extra groups are read (specified before remaining options):
++--defaults-file=# Only read default options from the given file #.
++--defaults-extra-file=# Read this file after the global files are read.
++--defaults-group-suffix=# Additionally read default groups with # appended as a suffix.
++
++ --allow-suspicious-udfs
++ Allows use of user-defined functions (UDFs) consisting of
++ only one symbol xxx() without corresponding xxx_init() or
++ xxx_deinit(). That also means that one can load any
++ function from any library, for example exit() from
++ libc.so
++ --alter-algorithm[=name]
++ Unused. One of: DEFAULT, COPY, INPLACE, NOCOPY, INSTANT.
++ Deprecated, will be removed in a future release.
++ --analyze-max-length=#
++ Fields which length in bytes more than this are skipped
++ by ANALYZE TABLE PERSISTENT unless explicitly listed in
++ the FOR COLUMNS () clause
++ --analyze-sample-percentage=#
++ Percentage of rows from the table ANALYZE TABLE will
++ sample to collect table statistics. Set to 0 to let
++ MariaDB decide what percentage of rows to sample
++ -a, --ansi Use ANSI SQL syntax instead of MariaDB syntax. This mode
++ will also set transaction isolation level 'serializable'
++ --aria-block-size=# Block size to be used for Aria index pages
++ --aria-checkpoint-interval=#
++ Interval between tries to do an automatic checkpoints. In
++ seconds; 0 means 'no automatic checkpoints' which makes
++ sense only for testing
++ --aria-checkpoint-log-activity=#
++ Number of bytes that the transaction log has to grow
++ between checkpoints before a new checkpoint is written to
++ the log
++ --aria-encrypt-tables
++ Encrypt tables (only for tables with ROW_FORMAT=PAGE
++ (default) and not FIXED/DYNAMIC)
++ --aria-force-start-after-recovery-failures=#
++ Number of consecutive log recovery failures after which
++ logs will be automatically deleted to cure the problem; 0
++ (the default) disables the feature
++ --aria-group-commit=name
++ Specifies Aria group commit mode. Possible values are
++ "none" (no group commit), "hard" (with waiting to actual
++ commit), "soft" (no wait for commit (DANGEROUS!!!))
++ --aria-group-commit-interval=#
++ Interval between commits in microseconds (1/1000000 sec).
++ 0 stands for no waiting for other threads to come and do
++ a commit in "hard" mode and no sync()/commit at all in
++ "soft" mode. Option has only an effect if
++ aria_group_commit is used
++ --aria-log-dir-path=name
++ Path to the directory where to store transactional log
++ --aria-log-file-size=#
++ Limit for transaction log size
++ --aria-log-purge-type=name
++ Specifies how Aria transactional log will be purged. One
++ of: immediate, external, at_flush
++ --aria-max-sort-file-size=#
++ Don't use the fast sort index method to created index if
++ the temporary file would get bigger than this
++ --aria-page-checksum
++ Maintain page checksums (can be overridden per table with
++ PAGE_CHECKSUM clause in CREATE TABLE)
++ (Defaults to on; use --skip-aria-page-checksum to disable.)
++ --aria-pagecache-age-threshold=#
++ This characterizes the number of hits a hot block has to
++ be untouched until it is considered aged enough to be
++ downgraded to a warm block. This specifies the percentage
++ ratio of that number of hits to the total number of
++ blocks in the page cache
++ --aria-pagecache-buffer-size=#
++ The size of the buffer used for index blocks for Aria
++ tables. Increase this to get better index handling (for
++ all reads and multiple writes) to as much as you can
++ afford
++ --aria-pagecache-division-limit=#
++ The minimum percentage of warm blocks in key cache
++ --aria-pagecache-file-hash-size=#
++ Number of hash buckets for open and changed files. If
++ you have a lot of Aria files open you should increase
++ this for faster flush of changes. A good value is
++ probably 1/10 of number of possible open Aria files
++ --aria-recover-options[=name]
++ Specifies how corrupted tables should be automatically
++ repaired. Any combination of: NORMAL, BACKUP, FORCE,
++ QUICK, OFF, or ALL to set all combinations
++ --aria-repair-threads=#
++ Number of threads to use when repairing Aria tables. The
++ value of 1 disables parallel repair
++ --aria-sort-buffer-size=#
++ The buffer that is allocated when sorting the index when
++ doing a REPAIR or when creating indexes with CREATE INDEX
++ or ALTER TABLE
++ --aria-stats-method=name
++ Specifies how Aria index statistics collection code
++ should treat NULLs. One of: nulls_unequal, nulls_equal,
++ nulls_ignored
++ --aria-sync-log-dir=name
++ Controls syncing directory after log file growth and new
++ file creation. One of: NEVER, NEWFILE, ALWAYS
++ --auto-increment-increment[=#]
++ Auto-increment columns are incremented by this
++ --auto-increment-offset[=#]
++ Offset added to Auto-increment columns. Used when
++ auto-increment-increment != 1
++ --autocommit Set default value for autocommit (0 or 1)
++ (Defaults to on; use --skip-autocommit to disable.)
++ --automatic-sp-privileges
++ Creating and dropping stored procedures alters ACLs
++ (Defaults to on; use --skip-automatic-sp-privileges to disable.)
++ --back-log=# The number of outstanding connection requests MariaDB can
++ have. This comes into play when the main MariaDB thread
++ gets many connection requests in a very short time
++ (Automatically configured unless set explicitly)
++ -b, --basedir=name Path to installation directory. All paths are usually
++ resolved relative to this
++ --big-tables Old variable, which if set to 1, allows large result sets
++ by saving all temporary sets to disk, avoiding 'table
++ full' errors. No longer needed, as the server now handles
++ this automatically. Deprecated, will be removed in a
++ future release.
++ --bind-address=name IP address to bind to. Several addresses may be
++ specified, separated by a comma (,)
++ --binlog-alter-two-phase
++ When set, split ALTER at binary logging into 2
++ statements: START ALTER and COMMIT/ROLLBACK ALTER
++ --binlog-annotate-row-events
++ Tells the master to annotate RBR events with the
++ statement that caused these events
++ (Defaults to on; use --skip-binlog-annotate-row-events to disable.)
++ --binlog-cache-size=#
++ The size of the transactional cache for updates to
++ transactional engines for the binary log. If you often
++ use transactions containing many statements, you can
++ increase this to get more performance
++ --binlog-checksum=name
++ Type of BINLOG_CHECKSUM_ALG. Include checksum for log
++ events in the binary log. One of: NONE, CRC32
++ --binlog-commit-wait-count=#
++ If non-zero, binlog write will wait at most
++ binlog_commit_wait_usec microseconds for at least this
++ many commits to queue up for group commit to the binlog.
++ This can reduce I/O on the binlog and provide increased
++ opportunity for parallel apply on the slave, but too high
++ a value will decrease commit throughput
++ --binlog-commit-wait-usec=#
++ Maximum time, in microseconds, to wait for more commits
++ to queue up for binlog group commit. Only takes effect if
++ the value of binlog_commit_wait_count is non-zero
++ --binlog-direct-non-transactional-updates
++ Causes updates to non-transactional engines using
++ statement format to be written directly to binary log.
++ Before using this option make sure that there are no
++ dependencies between transactional and non-transactional
++ tables such as in the statement INSERT INTO t_myisam
++ SELECT * FROM t_innodb; otherwise, slaves may diverge
++ from the master
++ --binlog-do-db=name Tells the master it should log updates for the specified
++ database, and exclude all others not explicitly mentioned
++ --binlog-expire-logs-seconds=#
++ If non-zero, binary logs will be purged after
++ binlog_expire_logs_seconds seconds; It and
++ expire_logs_days are linked, such that changes in one are
++ converted into the other. Possible purges happen at
++ startup and at binary log rotation
++ --binlog-file-cache-size=#
++ The size of file cache for the binary log
++ --binlog-format=name
++ The binary logging format the master will use: ROW for
++ row-based binary logging (safer), STATEMENT for
++ statement-based binary logging (smaller binary logs),
++ MIXED for statement-based binary logging when it's safe
++ with fall back to row-based otherwise
++ --binlog-gtid-index Enable the creation of a GTID index for every binlog
++ file, and the use of such index for speeding up GTID
++ lookup in the binlog
++ (Defaults to on; use --skip-binlog-gtid-index to disable.)
++ --binlog-gtid-index-page-size=#
++ Page size to use for the binlog GTID index
++ --binlog-gtid-index-span-min=#
++ Control sparseness of the binlog GTID index. If set to N,
++ at most one index record will be added for every N bytes
++ of binlog file written, to reduce the size of the index.
++ Normally does not need tuning
++ --binlog-ignore-db=name
++ Tells the master that updates to the given database
++ should not be logged to the binary log
++ --binlog-large-commit-threshold=#
++ Increases transaction concurrency for large transactions
++ (i.e. those with sizes larger than this value) by using
++ the large transaction's cache file as a new binary log,
++ and rotating the active binary log to the large
++ transaction's cache file at commit time. This avoids the
++ default commit logic that copies the transaction cache
++ data to the end of the active binary log file while
++ holding a lock that prevents other transactions from
++ binlogging
++ --binlog-legacy-event-pos
++ Fill in the end_log_pos field of _all_ events in the
++ binlog, even when doing so costs performance. Can be used
++ in case some old application needs it for backwards
++ compatibility. Setting this option can hurt binlog
++ scalability
++ --binlog-optimize-thread-scheduling
++ Run fast part of group commit in a single thread, to
++ optimize kernel thread scheduling. On by default. Disable
++ to run each transaction in group commit in its own
++ thread, which can be slower at very high concurrency.
++ This option is mostly for testing one algorithm versus
++ the other, and it should not normally be necessary to
++ change it. This variable is deprecated and will be
++ removed in a future release. Deprecated, will be removed
++ in a future release.
++ (Defaults to on; use --skip-binlog-optimize-thread-scheduling to disable.)
++ --binlog-row-event-max-size=#
++ The maximum size of a row-based binary log event in
++ bytes. Rows will be grouped into events smaller than this
++ size if possible. The value has to be a multiple of 256
++ --binlog-row-image=name
++ Controls whether rows should be logged in 'FULL',
++ 'FULL_NODUP', 'NOBLOB' or 'MINIMAL' formats. 'FULL',
++ means that all columns in the before and after image are
++ logged. 'FULL_NODUP', means that all columns are logged
++ in before image, but only changed columns or all columns
++ of inserted record are logged in after image, 'NOBLOB',
++ means that MariaDB avoids logging blob columns whenever
++ possible (eg, blob column was not changed or is not part
++ of primary key). 'MINIMAL', means that a PK equivalent
++ (PK columns or full row if there is no PK in the table)
++ is logged in the before image, and only changed columns
++ are logged in the after image
++ --binlog-row-metadata=name
++ Controls whether metadata is logged using FULL , MINIMAL
++ format and NO_LOG. FULL causes all metadata to be logged;
++ MINIMAL means that only metadata actually required by
++ slave is logged; NO_LOG NO metadata will be logged
++ --binlog-space-limit=#
++ Alias for max_binlog_total_size. Compatibility with
++ Percona server
++ --binlog-stmt-cache-size=#
++ The size of the statement cache for updates to
++ non-transactional engines for the binary log. If you
++ often use statements updating a great number of rows, you
++ can increase this to get more performance
++ --block-encryption-mode=name
++ Default block encryption mode for AES_ENCRYPT() and
++ AES_DECRYPT() functions. One of: aes-128-ecb, aes-192-ecb,
++ aes-256-ecb, aes-128-cbc, aes-192-cbc, aes-256-cbc,
++ aes-128-ctr, aes-192-ctr, aes-256-ctr
++ --bootstrap Used by MariaDB installation scripts
++ --bulk-insert-buffer-size=#
++ Size of tree cache used in bulk insert optimization. Note
++ that this is a limit per thread
++ --character-set-client-handshake
++ Don't ignore client side character set value sent during
++ handshake
++ (Defaults to on; use --skip-character-set-client-handshake to disable.)
++ --character-set-collations=name
++ Overrides for character set default collations
++ --character-set-filesystem=name
++ Set the filesystem character set
++ -C, --character-set-server=name
++ Set the default character set
++ --character-sets-dir=name
++ Directory where character sets are
++ -r, --chroot=name Chroot mariadbd process during startup
++ --collation-server=name
++ Set the default collation
++ --column-compression-threshold=#
++ Minimum column data length eligible for compression
++ --column-compression-zlib-level=#
++ zlib compression level (1 gives best speed, 9 gives best
++ compression)
++ --column-compression-zlib-strategy=name
++ The strategy parameter is used to tune the compression
++ algorithm. Use the value DEFAULT_STRATEGY for normal
++ data, FILTERED for data produced by a filter (or
++ predictor), HUFFMAN_ONLY to force Huffman encoding only
++ (no string match), or RLE to limit match distances to one
++ (run-length encoding). Filtered data consists mostly of
++ small values with a somewhat random distribution. In this
++ case, the compression algorithm is tuned to compress them
++ better. The effect of FILTERED is to force more Huffman
++ coding and less string matching; it is somewhat
++ intermediate between DEFAULT_STRATEGY and HUFFMAN_ONLY.
++ RLE is designed to be almost as fast as HUFFMAN_ONLY, but
++ give better compression for PNG image data. The strategy
++ parameter only affects the compression ratio but not the
++ correctness of the compressed output even if it is not
++ set appropriately. FIXED prevents the use of dynamic
++ Huffman codes, allowing for a simpler decoder for special
++ applications
++ --column-compression-zlib-wrap
++ Generate zlib header and trailer and compute adler32
++ check value. It can be used with storage engines that
++ don't provide data integrity verification to detect data
++ corruption
++ --completion-type=name
++ The transaction completion type. One of: NO_CHAIN, CHAIN,
++ RELEASE
++ --concurrent-insert[=name]
++ Use concurrent insert with MyISAM. One of: NEVER, AUTO,
++ ALWAYS
++ --connect-timeout=# The number of seconds the MariaDB server is waiting for a
++ connect packet before responding with 'Bad handshake'
++ --console Write error output on screen; don't remove the console
++ window on Windows
++ --core-file Write core on crashes
++ -h, --datadir=name Path to the database root directory
++ --deadlock-search-depth-long=#
++ Long search depth for the two-step deadlock detection
++ --deadlock-search-depth-short=#
++ Short search depth for the two-step deadlock detection
++ --deadlock-timeout-long=#
++ Long timeout for the two-step deadlock detection (in
++ microseconds)
++ --deadlock-timeout-short=#
++ Short timeout for the two-step deadlock detection (in
++ microseconds)
++ -#, --debug[=name] Built in DBUG debugger. Disabled in this build
++ --debug-abort-slave-event-count=#
++ Option used by mysql-test for debugging and testing of
++ replication
++ --debug-disconnect-slave-event-count=#
++ Option used by mysql-test for debugging and testing of
++ replication
++ -T, --debug-exit-info[=#]
++ Used for debugging. Use at your own risk
++ --debug-gdb Set up signals usable for debugging
++ --debug-max-binlog-dump-events=#
++ Option used by mysql-test for debugging and testing of
++ replication
++ --debug-no-sync Disables system sync calls. Only for running tests or
++ debugging
++ --debug-sporadic-binlog-dump-fail
++ Option used by mysql-test for debugging and testing of
++ replication
++ --default-password-lifetime=#
++ This defines the global password expiration policy. 0
++ means automatic password expiration is disabled. If the
++ value is a positive integer N, the passwords must be
++ changed every N days. This behavior can be overridden
++ using the password expiration options in ALTER USER
++ --default-regex-flags=name
++ Default flags for the regex library. Any combination of:
++ DOTALL, DUPNAMES, EXTENDED, EXTENDED_MORE, EXTRA,
++ MULTILINE, UNGREEDY, or ALL to set all combinations
++ --default-storage-engine=name
++ The default storage engine for new tables
++ --default-time-zone=name
++ Set the default time zone
++ --default-tmp-storage-engine=name
++ The default storage engine for user-created temporary
++ tables
++ --default-week-format=#
++ The default week format used by WEEK() functions
++ --delay-key-write[=name]
++ Specifies how MyISAM tables handles CREATE TABLE
++ DELAY_KEY_WRITE. If set to ON, the default, any DELAY KEY
++ WRITEs are honored. The key buffer is then flushed only
++ when the table closes, speeding up writes. MyISAM tables
++ should be automatically checked upon startup in this
++ case, and --external locking should not be used, as it
++ can lead to index corruption. If set to OFF, DELAY KEY
++ WRITEs are ignored, while if set to ALL, all new opened
++ tables are treated as if created with DELAY KEY WRITEs
++ enabled
++ --delayed-insert-limit=#
++ After inserting delayed_insert_limit rows, the INSERT
++ DELAYED handler will check if there are any SELECT
++ statements pending. If so, it allows these to execute
++ before continuing
++ --delayed-insert-timeout=#
++ How long a INSERT DELAYED thread should wait for INSERT
++ statements before terminating
++ --delayed-queue-size=#
++ What size queue (in rows) should be allocated for
++ handling INSERT DELAYED. If the queue becomes full, any
++ client that does INSERT DELAYED will wait until there is
++ room in the queue again
++ --des-key-file=name Load keys for des_encrypt() and des_encrypt from given
++ file
++ --disconnect-on-expired-password
++ This variable controls how the server handles clients
++ that are not aware of the sandbox mode. If enabled, the
++ server disconnects the client, otherwise the server puts
++ the client in a sandbox mode
++ --div-precision-increment=#
++ Precision of the result of '/' operator will be increased
++ on that value
++ --encrypt-binlog Encrypt binary logs (including relay logs)
++ --encrypt-tmp-disk-tables
++ Encrypt temporary on-disk tables (created as part of
++ query execution)
++ --encrypt-tmp-files Encrypt temporary files (created for filesort, binary log
++ cache, etc)
++ --enforce-storage-engine=name
++ Force the use of a storage engine for new tables
++ --eq-range-index-dive-limit=#
++ The optimizer will use existing index statistics instead
++ of doing index dives for equality ranges if the number of
++ equality ranges for the index is larger than or equal to
++ this number. If set to 0, index dives are always used
++ --event-scheduler[=name]
++ Enable the event scheduler. Possible values are ON, OFF,
++ and DISABLED (keep the event scheduler completely
++ deactivated, it cannot be activated run-time)
++ --expensive-subquery-limit=#
++ The maximum number of rows a subquery may examine in
++ order to be executed during optimization and used for
++ constant optimization
++ --expire-logs-days=#
++ If non-zero, binary logs will be purged after
++ expire_logs_days days; It and binlog_expire_logs_seconds
++ are linked, such that changes in one are converted into
++ the other, presentable as a decimal value with 1/1000000
++ of the day precision; possible purges happen at startup
++ and at binary log rotation
++ --explicit-defaults-for-timestamp
++ This option causes CREATE TABLE to create all TIMESTAMP
++ columns as NULL with DEFAULT NULL attribute, Without this
++ option, TIMESTAMP columns are NOT NULL and have implicit
++ DEFAULT clauses
++ (Defaults to on; use --skip-explicit-defaults-for-timestamp to disable.)
++ --external-locking Use system (external) locking (disabled by default).
++ With this option enabled you can run myisamchk to test
++ (not repair) tables while the MariaDB server is running.
++ Disable with --skip-external-locking
++ --extra-max-connections=#
++ The number of connections on extra-port
++ --extra-port=# Extra port number to use for tcp connections in a
++ one-thread-per-connection manner. 0 means don't use
++ another port
++ --feedback[=name] Enable or disable FEEDBACK plugin. One of: ON, OFF, FORCE
++ (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --feedback-http-proxy=name
++ Proxy server host:port
++ --feedback-send-retry-wait=#
++ Wait this many seconds before retrying a failed send
++ --feedback-send-timeout=#
++ Timeout (in seconds) for the sending the report
++ --feedback-url=name Space separated URLs to send the feedback report to
++ --feedback-user-info=name
++ User specified string that will be included in the
++ feedback report
++ --flashback Setup the server to use flashback. This enables binary
++ log in row mode and will enable extra logging for DDL's
++ needed by flashback feature
++ --flush Flush MyISAM tables to disk between SQL commands
++ --flush-time=# A dedicated thread is created to flush all tables at the
++ given interval
++ --ft-boolean-syntax=name
++ List of operators for MATCH ... AGAINST ( ... IN BOOLEAN
++ MODE)
++ --ft-max-word-len=# The maximum length of the word to be included in a
++ FULLTEXT index. Note: FULLTEXT indexes must be rebuilt
++ after changing this variable
++ --ft-min-word-len=# The minimum length of the word to be included in a
++ FULLTEXT index. Note: FULLTEXT indexes must be rebuilt
++ after changing this variable
++ --ft-query-expansion-limit=#
++ Number of best matches to use for query expansion
++ --ft-stopword-file=name
++ Use stopwords from this file instead of built-in list
++ --gdb Set up signals usable for debugging. Deprecated, will be
++ removed in a future release. Please use --debug-gdb
++ instead.
++ --general-log Log connections and queries to a table or log file.
++ Defaults logging to a file 'hostname'.log or a table
++ mysql.general_log if --log-output=TABLE is used
++ --general-log-file=name
++ Log connections and queries to given file
++ --getopt-prefix-matching
++ Recognize command-line options by their unambiguous
++ prefixes
++ (Defaults to on; use --skip-getopt-prefix-matching to disable.)
++ --group-concat-max-len=#
++ The maximum length of the result of function
++ GROUP_CONCAT()
++ --gtid-cleanup-batch-size=#
++ Normally does not need tuning. How many old rows must
++ accumulate in the mysql.gtid_slave_pos table before a
++ background job will be run to delete them. Can be
++ increased to reduce number of commits if using many
++ different engines with --gtid_pos_auto_engines, or to
++ reduce CPU overhead if using a huge number of different
++ gtid_domain_ids. Can be decreased to reduce number of old
++ rows in the table
++ --gtid-domain-id=# Used with global transaction ID to identify logically
++ independent replication streams. When events can
++ propagate through multiple parallel paths (for example
++ multiple masters), each independent source server must
++ use a distinct domain_id. For simple tree-shaped
++ replication topologies, it can be left at its default, 0
++ --gtid-ignore-duplicates
++ When set, different master connections in multi-source
++ replication are allowed to receive and process event
++ groups with the same GTID (when using GTID mode). Only
++ one will be applied, any others will be ignored. Within a
++ given replication domain, just the sequence number will
++ be used to decide whether a given GTID has been already
++ applied; this means it is the responsibility of the user
++ to ensure that GTID sequence numbers are strictly
++ increasing
++ --gtid-pos-auto-engines=name
++ List of engines for which to automatically create a
++ mysql.gtid_slave_pos_ENGINE table, if a transaction using
++ that engine is replicated. This can be used to avoid
++ introducing cross-engine transactions, if engines are
++ used different from that used by table
++ mysql.gtid_slave_pos
++ --gtid-strict-mode Enforce strict seq_no ordering of events in the binary
++ log. Slave stops with an error if it encounters an event
++ that would cause it to generate an out-of-order binlog if
++ executed. When ON the same server-id semisync-replicated
++ transactions that duplicate existing ones in binlog are
++ ignored without error and slave interruption
++ -?, --help Display this help and exit
++ --histogram-size=# Number of bytes used for a histogram. If set to 0, no
++ histograms are created by ANALYZE
++ --histogram-type=name
++ Specifies type of the histograms created by ANALYZE.
++ Possible values are: SINGLE_PREC_HB - single precision
++ height-balanced, DOUBLE_PREC_HB - double precision
++ height-balanced, JSON_HB - height-balanced, stored as
++ JSON
++ --host-cache-size=# How many host names should be cached to avoid resolving
++ (Automatically configured unless set explicitly)
++ --idle-readonly-transaction-timeout=#
++ The number of seconds the server waits for read-only idle
++ transaction
++ --idle-transaction-timeout=#
++ The number of seconds the server waits for idle
++ transaction
++ --idle-write-transaction-timeout=#
++ The number of seconds the server waits for write idle
++ transaction
++ --ignore-builtin-innodb
++ Disable initialization of builtin InnoDB plugin
++ --ignore-db-dirs=name
++ Specifies a directory to add to the ignore list when
++ collecting database names from the datadir. Put a blank
++ argument to reset the list accumulated so far
++ --in-predicate-conversion-threshold=#
++ The minimum number of scalar elements in the value list
++ of IN predicate that triggers its conversion to IN
++ subquery. Set to 0 to disable the conversion
++ --init-connect=name Command(s) that are executed for each new connection
++ (unless the user has SUPER privilege)
++ --init-file=name Read SQL commands from this file at startup
++ --init-rpl-role=name
++ Set the replication role. One of: MASTER, SLAVE
++ --init-slave=name Command(s) that are executed by a slave server each time
++ the SQL thread starts
++ --innodb[=name] Enable or disable InnoDB plugin. One of: ON, OFF, FORCE
++ (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-adaptive-flushing
++ Attempt flushing dirty pages to avoid IO bursts at
++ checkpoints
++ (Defaults to on; use --skip-innodb-adaptive-flushing to disable.)
++ --innodb-adaptive-flushing-lwm=#
++ Percentage of log capacity below which no adaptive
++ flushing happens
++ --innodb-adaptive-hash-index
++ Enable InnoDB adaptive hash index (disabled by default)
++ --innodb-adaptive-hash-index-cells=#
++ Number of adaptive hash table cells in each partition;
++ 16381 at start defaults to being derived from
++ innodb_buffer_pool_size
++ --innodb-adaptive-hash-index-parts[=#]
++ Number of InnoDB Adaptive Hash Index Partitions (default
++ 8)
++ --innodb-alter-copy-bulk
++ Allow bulk insert operation for copy alter operation
++ (Defaults to on; use --skip-innodb-alter-copy-bulk to disable.)
++ --innodb-autoextend-increment=#
++ Data file autoextend increment in megabytes
++ --innodb-autoinc-lock-mode=#
++ The AUTOINC lock modes supported by InnoDB: 0 => Old
++ style AUTOINC locking (for backward compatibility); 1 =>
++ New style AUTOINC locking; 2 => No AUTOINC locking
++ (unsafe for SBR)
++ --innodb-buf-dump-status-frequency=#
++ A number that tells how often buffer pool dump status in
++ percentages should be printed. E.g. 10 means that buffer
++ pool dump status is printed when every 10% of number of
++ buffer pool pages are dumped. Default is 0 (only start
++ and end status is printed)
++ --innodb-buffer-page[=name]
++ Enable or disable INNODB_BUFFER_PAGE plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-buffer-page-lru[=name]
++ Enable or disable INNODB_BUFFER_PAGE_LRU plugin. One of:
++ ON, OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-buffer-pool-chunk-size=#
++ Deprecated parameter with no effect. Deprecated, will be
++ removed in a future release.
++ --innodb-buffer-pool-dump-at-shutdown
++ Dump the buffer pool into a file named
++ @@innodb_buffer_pool_filename
++ (Defaults to on; use --skip-innodb-buffer-pool-dump-at-shutdown to disable.)
++ --innodb-buffer-pool-dump-now
++ Trigger an immediate dump of the buffer pool into a file
++ named @@innodb_buffer_pool_filename
++ --innodb-buffer-pool-dump-pct=#
++ Dump only the hottest N% of each buffer pool, defaults to
++ 25
++ --innodb-buffer-pool-filename=name
++ Filename to/from which to dump/load the InnoDB buffer
++ pool
++ --innodb-buffer-pool-load-abort
++ Abort a currently running load of the buffer pool
++ --innodb-buffer-pool-load-at-startup
++ Load the buffer pool from a file named
++ @@innodb_buffer_pool_filename
++ (Defaults to on; use --skip-innodb-buffer-pool-load-at-startup to disable.)
++ --innodb-buffer-pool-load-now
++ Trigger an immediate load of the buffer pool from a file
++ named @@innodb_buffer_pool_filename
++ --innodb-buffer-pool-size=#
++ The size of the memory buffer InnoDB uses to cache data
++ and indexes of its tables
++ --innodb-buffer-pool-size-auto-min=#
++ Minimum innodb_buffer_pool_size for dynamic shrinking on
++ memory pressure
++ --innodb-buffer-pool-size-max=#
++ Maximum innodb_buffer_pool_size
++ --innodb-buffer-pool-stats[=name]
++ Enable or disable INNODB_BUFFER_POOL_STATS plugin. One
++ of: ON, OFF, FORCE (don't start if the plugin fails to
++ load), FORCE_PLUS_PERMANENT (like FORCE, but the plugin
++ can not be uninstalled).
++ --innodb-checksum-algorithm=name
++ The algorithm InnoDB uses for page checksumming. Possible
++ values are FULL_CRC32 for new files, always use CRC-32C;
++ for old, see CRC32 below; STRICT_FULL_CRC32 for new
++ files, always use CRC-32C; for old, see STRICT_CRC32
++ below; CRC32 write crc32, allow previously used
++ algorithms to match when reading; STRICT_CRC32 write
++ crc32, do not allow other algorithms to match when
++ reading; New files created with full_crc32 are readable
++ by MariaDB 10.4.3+
++ --innodb-cmp[=name] Enable or disable INNODB_CMP plugin. One of: ON, OFF,
++ FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-cmp-per-index[=name]
++ Enable or disable INNODB_CMP_PER_INDEX plugin. One of:
++ ON, OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-cmp-per-index-enabled
++ Enable INFORMATION_SCHEMA.innodb_cmp_per_index, may have
++ negative impact on performance (off by default)
++ --innodb-cmp-per-index-reset[=name]
++ Enable or disable INNODB_CMP_PER_INDEX_RESET plugin. One
++ of: ON, OFF, FORCE (don't start if the plugin fails to
++ load), FORCE_PLUS_PERMANENT (like FORCE, but the plugin
++ can not be uninstalled).
++ --innodb-cmp-reset[=name]
++ Enable or disable INNODB_CMP_RESET plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-cmpmem[=name]
++ Enable or disable INNODB_CMPMEM plugin. One of: ON, OFF,
++ FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-cmpmem-reset[=name]
++ Enable or disable INNODB_CMPMEM_RESET plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-compression-algorithm[=name]
++ Compression algorithm used on page compression. One of:
++ none, zlib, lz4, lzo, lzma, bzip2, or snappy
++ --innodb-compression-default
++ Is compression the default for new tables
++ --innodb-compression-failure-threshold-pct[=#]
++ If the compression failure rate of a table is greater
++ than this number more padding is added to the pages to
++ reduce the failures. A value of zero implies no padding
++ --innodb-compression-level=#
++ Compression level used for zlib compression. 0 is no
++ compression, 1 is fastest, 9 is best compression and
++ default is 6
++ --innodb-compression-pad-pct-max[=#]
++ Percentage of empty space on a data page that can be
++ reserved to make the page compressible
++ --innodb-data-file-buffering
++ Whether the file system cache for data files is enabled
++ --innodb-data-file-path=name
++ Path to individual files and their sizes
++ --innodb-data-file-write-through
++ Whether each write to data files writes through
++ --innodb-data-home-dir=name
++ The common part for InnoDB table spaces
++ --innodb-deadlock-detect
++ Enable/disable InnoDB deadlock detector (default ON). if
++ set to OFF, deadlock detection is skipped, and we rely on
++ innodb_lock_wait_timeout in case of deadlock
++ (Defaults to on; use --skip-innodb-deadlock-detect to disable.)
++ --innodb-deadlock-report=name
++ How to report deadlocks (if innodb_deadlock_detect=ON).
++ One of: off, basic, full
++ --innodb-default-encryption-key-id=#
++ Default encryption key id used for table encryption
++ --innodb-default-row-format=name
++ The default ROW FORMAT for all innodb tables created
++ without explicit ROW_FORMAT. Possible values are
++ REDUNDANT, COMPACT, and DYNAMIC. The ROW_FORMAT value
++ COMPRESSED is not allowed. One of: redundant, compact,
++ dynamic
++ --innodb-disable-sort-file-cache
++ Whether to disable OS system file cache for sort I/O
++ --innodb-doublewrite[=name]
++ Whether and how to use the doublewrite buffer. OFF=Assume
++ that writes of innodb_page_size are atomic; ON=Prevent
++ torn writes (the default); fast=Like ON, but do not
++ synchronize writes to data files
++ --innodb-encrypt-log
++ Enable redo log encryption
++ --innodb-encrypt-tables[=name]
++ Enable encryption for tables. Don't forget to enable
++ --innodb-encrypt-log too. One of: OFF, ON, FORCE
++ --innodb-encrypt-temporary-tables
++ Encrypt the temporary table data.
++ --innodb-encryption-rotate-key-age=#
++ Key rotation - re-encrypt in background all pages that
++ were encrypted with a key that many (or more) versions
++ behind. Value 0 indicates that key rotation is disabled
++ --innodb-encryption-rotation-iops=#
++ Use this many iops for background key rotation
++ --innodb-encryption-threads=#
++ Number of threads performing background key rotation
++ --innodb-fast-shutdown[=#]
++ Speeds up the shutdown process of the InnoDB storage
++ engine. Possible values are 0, 1 (faster), 2
++ (crash-like), 3 (fastest clean)
++ --innodb-fatal-semaphore-wait-threshold=#
++ Maximum number of seconds that semaphore times out in
++ InnoDB
++ --innodb-file-per-table
++ Stores each InnoDB table to an .ibd file in the database
++ dir. Deprecated, will be removed in a future release.
++ (Defaults to on; use --skip-innodb-file-per-table to disable.)
++ --innodb-fill-factor=#
++ Percentage of B-tree page filled during bulk insert
++ --innodb-flush-log-at-timeout[=#]
++ Write and flush logs every (n) second
++ --innodb-flush-log-at-trx-commit[=#]
++ Controls the durability/speed trade-off for commits. Set
++ to 0 (write and flush redo log to disk only once per
++ second), 1 (flush to disk at each commit), 2 (write to
++ log at commit but flush to disk only once per second) or
++ 3 (flush to disk at prepare and at commit, slower and
++ usually redundant). 1 and 3 guarantees that after a
++ crash, committed transactions will not be lost and will
++ be consistent with the binlog and other transactional
++ engines. 2 can get inconsistent and lose transactions if
++ there is a power failure or kernel crash but not if
++ mysqld crashes. 0 has no guarantees in case of crash. 0
++ and 2 can be faster than 1 or 3
++ --innodb-flush-method=name
++ With which method to flush data. One of: fsync, O_DSYNC,
++ littlesync, nosync, O_DIRECT, O_DIRECT_NO_FSYNC.
++ Deprecated, will be removed in a future release.
++ --innodb-flush-neighbors[=#]
++ Set to 0 (don't flush neighbors from buffer pool), 1
++ (flush contiguous neighbors from buffer pool) or 2 (flush
++ neighbors from buffer pool), when flushing a block
++ --innodb-flush-sync Allow IO bursts at the checkpoints ignoring io_capacity
++ setting
++ (Defaults to on; use --skip-innodb-flush-sync to disable.)
++ --innodb-flushing-avg-loops=#
++ Number of iterations over which the background flushing
++ is averaged
++ --innodb-force-primary-key
++ Do not allow creating a table without primary key (off by
++ default)
++ --innodb-force-recovery=#
++ Helps to save your data in case the disk image of the
++ database becomes corrupt. Value 5 can return bogus data,
++ and 6 can permanently corrupt data
++ --innodb-ft-aux-table=name
++ FTS internal auxiliary table to be checked
++ --innodb-ft-being-deleted[=name]
++ Enable or disable INNODB_FT_BEING_DELETED plugin. One of:
++ ON, OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-ft-cache-size=#
++ InnoDB Fulltext search cache size in bytes
++ --innodb-ft-config[=name]
++ Enable or disable INNODB_FT_CONFIG plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-ft-default-stopword[=name]
++ Enable or disable INNODB_FT_DEFAULT_STOPWORD plugin. One
++ of: ON, OFF, FORCE (don't start if the plugin fails to
++ load), FORCE_PLUS_PERMANENT (like FORCE, but the plugin
++ can not be uninstalled).
++ --innodb-ft-deleted[=name]
++ Enable or disable INNODB_FT_DELETED plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-ft-enable-diag-print
++ Whether to enable additional FTS diagnostic printout
++ --innodb-ft-enable-stopword
++ Create FTS index with stopword
++ (Defaults to on; use --skip-innodb-ft-enable-stopword to disable.)
++ --innodb-ft-index-cache[=name]
++ Enable or disable INNODB_FT_INDEX_CACHE plugin. One of:
++ ON, OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-ft-index-table[=name]
++ Enable or disable INNODB_FT_INDEX_TABLE plugin. One of:
++ ON, OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-ft-max-token-size=#
++ InnoDB Fulltext search maximum token size in characters
++ --innodb-ft-min-token-size=#
++ InnoDB Fulltext search minimum token size in characters
++ --innodb-ft-num-word-optimize[=#]
++ InnoDB Fulltext search number of words to optimize for
++ each optimize table call
++ --innodb-ft-result-cache-limit=#
++ InnoDB Fulltext search query result cache limit in bytes
++ --innodb-ft-server-stopword-table[=name]
++ The user supplied stopword table name
++ --innodb-ft-sort-pll-degree=#
++ InnoDB Fulltext search parallel sort degree, will round
++ up to nearest power of 2 number
++ --innodb-ft-total-cache-size=#
++ Total memory allocated for InnoDB Fulltext Search cache
++ --innodb-ft-user-stopword-table[=name]
++ User supplied stopword table name, effective in the
++ session level
++ --innodb-immediate-scrub-data-uncompressed
++ Enable scrubbing of data
++ --innodb-instant-alter-column-allowed=name
++ File format constraint for ALTER TABLE. One of: never,
++ add_last, add_drop_reorder
++ --innodb-io-capacity=#
++ Number of IOPs the server can do. Tunes the background IO
++ rate
++ --innodb-io-capacity-max=#
++ Limit to which innodb_io_capacity can be inflated
++ --innodb-linux-aio=name
++ Specifies which Linux AIO implementation should be used.
++ Possible value are "auto" (default) to select io_uring
++ and fallback to aio, or explicit "io_uring" or "aio"
++ --innodb-lock-wait-timeout=#
++ Timeout in seconds an InnoDB transaction may wait for a
++ lock before being rolled back. The value 100000000 is
++ infinite timeout
++ --innodb-lock-waits[=name]
++ Enable or disable INNODB_LOCK_WAITS plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-locks[=name]
++ Enable or disable INNODB_LOCKS plugin. One of: ON, OFF,
++ FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-log-buffer-size=#
++ Redo log buffer size in bytes
++ --innodb-log-checkpoint-now
++ Write back dirty pages from the buffer pool and update
++ the log checkpoint
++ --innodb-log-file-buffering
++ Whether the file system cache for ib_logfile0 is enabled
++ --innodb-log-file-mmap
++ Whether ib_logfile0 resides in persistent memory (when
++ supported) or should initially be memory-mapped
++ (Defaults to on; use --skip-innodb-log-file-mmap to disable.)
++ --innodb-log-file-size=#
++ Redo log size in bytes
++ --innodb-log-file-write-through
++ Whether each write to ib_logfile0 is write through
++ --innodb-log-group-home-dir=name
++ Path to ib_logfile0
++ --innodb-log-spin-wait-delay[=#]
++ Deprecated parameter with no effect. Deprecated, will be
++ removed in a future release.
++ --innodb-log-write-ahead-size=#
++ Redo log write size to avoid read-on-write; must be a
++ power of two
++ --innodb-lru-scan-depth=#
++ How deep to scan LRU to keep it clean
++ --innodb-max-dirty-pages-pct=#
++ Percentage of dirty pages allowed in bufferpool
++ --innodb-max-dirty-pages-pct-lwm=#
++ Percentage of dirty pages at which flushing kicks in. The
++ value 0 (default) means 'refer to
++ innodb_max_dirty_pages_pct'
++ --innodb-max-purge-lag=#
++ Desired maximum length of the purge queue (0 = no limit)
++ --innodb-max-purge-lag-delay=#
++ Maximum delay of user threads in micro-seconds
++ --innodb-max-purge-lag-wait=#
++ Wait until History list length is below the specified
++ limit
++ --innodb-max-undo-log-size[=#]
++ Desired maximum UNDO tablespace size in bytes
++ --innodb-metrics[=name]
++ Enable or disable INNODB_METRICS plugin. One of: ON, OFF,
++ FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-monitor-disable=name
++ Turn off a monitor counter
++ --innodb-monitor-enable=name
++ Turn on a monitor counter
++ --innodb-monitor-reset=name
++ Reset a monitor counter
++ --innodb-monitor-reset-all=name
++ Reset all values for a monitor counter
++ --innodb-numa-interleave
++ Use NUMA interleave memory policy to allocate InnoDB
++ buffer pool
++ --innodb-old-blocks-pct=#
++ Percentage of the buffer pool to reserve for 'old' blocks
++ --innodb-old-blocks-time=#
++ Move blocks to the 'new' end of the buffer pool if the
++ first access was at least this many milliseconds ago. The
++ timeout is disabled if 0
++ --innodb-online-alter-log-max-size=#
++ Maximum modification log file size for online index
++ creation
++ --innodb-open-files=#
++ How many files at the maximum InnoDB keeps open at the
++ same time
++ --innodb-optimize-fulltext-only
++ Only optimize the Fulltext index of the table
++ --innodb-page-size[=#]
++ Page size to use for all InnoDB tablespaces
++ --innodb-prefix-index-cluster-optimization
++ Unused. Deprecated, will be removed in a future release.
++ --innodb-print-all-deadlocks
++ Print all deadlocks to MariaDB error log (off by default)
++ --innodb-purge-batch-size[=#]
++ Number of UNDO log pages to purge in one batch from the
++ history list
++ --innodb-purge-threads[=#]
++ Number of tasks for purging transaction history
++ --innodb-random-read-ahead
++ Whether to use read ahead for random access within an
++ extent
++ --innodb-read-ahead-threshold=#
++ Number of pages that must be accessed sequentially for
++ InnoDB to trigger a readahead
++ --innodb-read-io-threads=#
++ Number of background read I/O threads in InnoDB
++ --innodb-read-only Start InnoDB in read only mode (off by default)
++ --innodb-read-only-compressed
++ Make ROW_FORMAT=COMPRESSED tables read-only
++ --innodb-rollback-on-timeout
++ Roll back the complete transaction on lock wait timeout,
++ for 4.x compatibility (disabled by default)
++ --innodb-snapshot-isolation
++ Use snapshot isolation (write-write conflict detection)
++ (Defaults to on; use --skip-innodb-snapshot-isolation to disable.)
++ --innodb-sort-buffer-size=#
++ Memory buffer size for index creation
++ --innodb-spin-wait-delay[=#]
++ Maximum delay between polling for a spin lock (4 by
++ default)
++ --innodb-stats-auto-recalc
++ InnoDB automatic recalculation of persistent statistics
++ enabled for all tables unless overridden at table level
++ (automatic recalculation is only done when InnoDB decides
++ that the table has changed too much and needs a new
++ statistics)
++ (Defaults to on; use --skip-innodb-stats-auto-recalc to disable.)
++ --innodb-stats-include-delete-marked
++ Include delete marked records when calculating persistent
++ statistics
++ --innodb-stats-method=name
++ Specifies how InnoDB index statistics collection code
++ should treat NULLs. Possible values are NULLS_EQUAL
++ (default), NULLS_UNEQUAL and NULLS_IGNORED. One of:
++ nulls_equal, nulls_unequal, nulls_ignored
++ --innodb-stats-modified-counter=#
++ The number of rows modified before we calculate new
++ statistics (default 0 = current limits)
++ --innodb-stats-on-metadata
++ Enable statistics gathering for metadata commands such as
++ SHOW TABLE STATUS for tables that use transient
++ statistics (off by default)
++ --innodb-stats-persistent
++ InnoDB persistent statistics enabled for all tables
++ unless overridden at table level
++ (Defaults to on; use --skip-innodb-stats-persistent to disable.)
++ --innodb-stats-persistent-sample-pages=#
++ The number of leaf index pages to sample when calculating
++ persistent statistics (by ANALYZE, default 20)
++ --innodb-stats-traditional
++ Enable traditional statistic calculation based on number
++ of configured pages (default true)
++ (Defaults to on; use --skip-innodb-stats-traditional to disable.)
++ --innodb-stats-transient-sample-pages=#
++ The number of leaf index pages to sample when calculating
++ transient statistics (if persistent statistics are not
++ used, default 8)
++ --innodb-status-file
++ Enable SHOW ENGINE INNODB STATUS output in the
++ innodb_status.<pid> file
++ --innodb-status-output
++ Enable InnoDB monitor output to the error log
++ --innodb-status-output-locks
++ Enable InnoDB lock monitor output to the error log.
++ Requires innodb_status_output=ON
++ --innodb-strict-mode
++ Use strict mode when evaluating create options
++ (Defaults to on; use --skip-innodb-strict-mode to disable.)
++ --innodb-sync-spin-loops=#
++ Count of spin-loop rounds in InnoDB mutexes (30 by
++ default)
++ --innodb-sys-columns[=name]
++ Enable or disable INNODB_SYS_COLUMNS plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-sys-fields[=name]
++ Enable or disable INNODB_SYS_FIELDS plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-sys-foreign[=name]
++ Enable or disable INNODB_SYS_FOREIGN plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-sys-foreign-cols[=name]
++ Enable or disable INNODB_SYS_FOREIGN_COLS plugin. One of:
++ ON, OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-sys-indexes[=name]
++ Enable or disable INNODB_SYS_INDEXES plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-sys-tables[=name]
++ Enable or disable INNODB_SYS_TABLES plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-sys-tablespaces[=name]
++ Enable or disable INNODB_SYS_TABLESPACES plugin. One of:
++ ON, OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-sys-tablestats[=name]
++ Enable or disable INNODB_SYS_TABLESTATS plugin. One of:
++ ON, OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-sys-virtual[=name]
++ Enable or disable INNODB_SYS_VIRTUAL plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-table-locks
++ Enable InnoDB locking in LOCK TABLES
++ (Defaults to on; use --skip-innodb-table-locks to disable.)
++ --innodb-tablespaces-encryption[=name]
++ Enable or disable INNODB_TABLESPACES_ENCRYPTION plugin.
++ One of: ON, OFF, FORCE (don't start if the plugin fails
++ to load), FORCE_PLUS_PERMANENT (like FORCE, but the
++ plugin can not be uninstalled).
++ --innodb-temp-data-file-path=name
++ Path to files and their sizes making temp-tablespace
++ --innodb-tmpdir[=name]
++ Directory for temporary non-tablespace files
++ --innodb-truncate-temporary-tablespace-now
++ Shrink the temporary tablespace
++ --innodb-trx[=name] Enable or disable INNODB_TRX plugin. One of: ON, OFF,
++ FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --innodb-undo-directory=name
++ Directory where undo tablespace files live, this path can
++ be absolute
++ --innodb-undo-log-truncate
++ Enable or Disable Truncate of UNDO tablespace
++ --innodb-undo-tablespaces=#
++ Number of undo tablespaces to use
++ --innodb-use-atomic-writes
++ Enable atomic writes, instead of using the doublewrite
++ buffer, for files on devices that supports atomic writes
++ (Defaults to on; use --skip-innodb-use-atomic-writes to disable.)
++ --innodb-use-native-aio
++ Use native AIO if supported on this platform
++ (Defaults to on; use --skip-innodb-use-native-aio to disable.)
++ --innodb-write-io-threads=#
++ Number of background write I/O threads in InnoDB
++ --interactive-timeout=#
++ The number of seconds the server waits for activity on an
++ interactive connection before closing it
++ --join-buffer-size=#
++ The size of the buffer that is used for joins
++ --join-buffer-space-limit=#
++ The limit of the space for all join buffers used by a
++ query
++ --join-cache-level=#
++ Controls what join operations can be executed with join
++ buffers. Odd numbers are used for plain join buffers
++ while even numbers are used for linked buffers
++ --keep-files-on-create
++ Don't overwrite stale .MYD and .MYI even if no directory
++ is specified. Deprecated, will be removed in a future
++ release.
++ --key-buffer-size=# The size of the buffer used for index blocks for MyISAM
++ tables. Increase this to get faster index handling
++ --key-cache-age-threshold=#
++ This characterizes the number of hits a hot block has to
++ be untouched until it is considered aged enough to be
++ downgraded to a warm block. This specifies the percentage
++ ratio of that number of hits to the total number of
++ blocks in key cache
++ --key-cache-block-size=#
++ The default size of key cache blocks
++ --key-cache-division-limit=#
++ The minimum percentage of warm blocks in key cache
++ --key-cache-file-hash-size=#
++ Number of hash buckets for open and changed files. If
++ you have a lot of MyISAM files open you should increase
++ this for faster flush of changes. A good value is
++ probably 1/10 of number of possible open MyISAM files
++ --key-cache-segments=#
++ The number of segments in a key cache
++ -L, --language=name Client error messages in given language. May be given as
++ a full path. Deprecated, will be removed in a future
++ release. Please use --lc-messages-dir instead.
++ --large-pages Enable support for large pages
++ --lc-messages=name Set the language used for the error messages
++ -L, --lc-messages-dir=name
++ Directory where error messages are
++ --lc-time-names=name
++ Set the language used for the month names and the days of
++ the week
++ --local-infile Enable LOAD DATA LOCAL INFILE
++ (Defaults to on; use --skip-local-infile to disable.)
++ --lock-wait-timeout=#
++ Timeout in seconds to wait for a lock before returning an
++ error
++ --log-basename=name Basename for all log files and the .pid file. This sets
++ all log file names at once (in 'datadir') and is normally
++ the only option you need for specifying log files. Sets
++ names for --log-bin, --log-bin-index, --relay-log,
++ --relay-log-index, --general-log-file,
++ --log-slow-query-file, --log-error-file, and --pid-file.
++ If log-basename includes a path, the path will apply for
++ all above variables except pid-file that will use it
++ without the path
++ --log-bin[=name] Log update queries in binary format. Optional argument
++ should be name for binary log. If not given
++ 'datadir'/'log-basename'-bin or 'datadir'/mysql-bin will
++ be used (the later if --log-basename is not specified).
++ We strongly recommend to use either --log-basename or
++ specify a filename to ensure that replication doesn't
++ stop if the real hostname of the computer changes
++ --log-bin-compress Whether the binary log can be compressed
++ --log-bin-compress-min-len[=#]
++ Minimum length of sql statement (in statement mode) or
++ record (in row mode) that can be compressed
++ --log-bin-index=name
++ File that holds the names for last binary log files
++ --log-bin-trust-function-creators
++ If set to FALSE (the default), then when --log-bin is
++ used, creation of a stored function (or trigger) is
++ allowed only to users having the SUPER privilege and only
++ if this stored function (trigger) may not break binary
++ logging. Note that if ALL connections to this server
++ ALWAYS use row-based binary logging, the security issues
++ do not exist and the binary logging cannot break, so you
++ can safely set this to TRUE
++ --log-ddl-recovery=name
++ Path to file used for recovery of DDL statements after a
++ crash
++ --log-disabled-statements=name
++ Don't log certain types of statements to general log. Any
++ combination of: slave, sp, or ALL to set all combinations
++ --log-error[=name] Log errors to file (instead of stdout). If file name is
++ not specified then 'datadir'/'log-basename'.err or the
++ 'pid-file' path with extension .err is used
++ --log-isam[=name] Log all MyISAM changes to file
++ --log-output=name How logs should be written. Any combination of: NONE,
++ FILE, TABLE, or ALL to set all combinations
++ --log-queries-not-using-indexes
++ Log queries that are executed without benefit of any
++ index to the slow log if it is open. Same as
++ log_slow_filter='not_using_index'
++ --log-short-format Don't log extra information to update and slow-query logs
++ --log-slave-updates Tells the slave to log the updates from the slave thread
++ to the binary log. You will need to turn it on if you
++ plan to daisy-chain the slaves
++ --log-slow-admin-statements
++ Log slow OPTIMIZE, ANALYZE, ALTER and other
++ administrative statements to the slow log if it is open.
++ Resets or sets the option 'admin' in log_slow_filter.
++ Deprecated, will be removed in a future release. Please
++ use --log-slow-filter instead.
++ (Defaults to on; use --skip-log-slow-admin-statements to disable.)
++ --log-slow-always-query-time=#
++ Queries slower than log_slow_always_query_time are not
++ affected by log_slow_rate_limit or
++ log_slow_min_examined_row_limit. Query will be logged if
++ execution time of the query is longer than
++ log_slow_query_time and log_slow_always_query_time. The
++ argument will be treated as a decimal value with
++ microsecond precision
++ --log-slow-disabled-statements=name
++ Don't log certain types of statements to slow log. Any
++ combination of: admin, call, slave, sp, or ALL to set all
++ combinations
++ --log-slow-filter=name
++ Log only certain types of queries to the slow log. If
++ variable is empty all kinds of queries are logged. All
++ types are bound by slow_query_time, except
++ 'not_using_index' which is always logged if enabled. Any
++ combination of: admin, filesort, filesort_on_disk,
++ filesort_priority_queue, full_join, full_scan,
++ not_using_index, query_cache, query_cache_miss, tmp_table,
++ tmp_table_on_disk, or ALL to set all combinations
++ --log-slow-max-warnings=#
++ Max numbers of warnings printed to slow query log per
++ statement
++ --log-slow-min-examined-row-limit=#
++ Don't write queries to slow log that examine fewer rows
++ than that
++ --log-slow-query Log slow queries to a table or log file. Defaults logging
++ to a file 'hostname'-slow.log or a table mysql.slow_log
++ if --log-output=TABLE is used. Must be enabled to
++ activate other slow log options
++ --log-slow-query-file=name
++ Log slow queries to given log file. Defaults logging to
++ 'hostname'-slow.log. Must be enabled to activate other
++ slow log options
++ --log-slow-query-time=#
++ Log all queries that have taken more than
++ log_slow_query_time seconds to execute to the slow query
++ log file. The argument will be treated as a decimal value
++ with microsecond precision. Affected by
++ log_slow_rate_limit and log_slow_min_examined_row_limit
++ --log-slow-rate-limit=#
++ Write to slow log every #th slow query. Set to 1 to log
++ everything. Increase it to reduce the size of the slow or
++ the performance impact of slow logging
++ --log-slow-slave-statements
++ Log slow statements executed by slave thread to the slow
++ log if it is open. Resets or sets the option 'slave' in
++ log_slow_disabled_statements
++ (Defaults to on; use --skip-log-slow-slave-statements to disable.)
++ --log-slow-verbosity=name
++ Verbosity level for the slow log. Any combination of:
++ innodb, query_plan, explain, engine, warnings, full, or
++ ALL to set all combinations
++ --log-tc=name Path to transaction coordinator log (used for
++ transactions that affect more than one storage engine,
++ when binary log is disabled)
++ --log-tc-size=# Size of transaction coordinator log
++ -W, --log-warnings[=#]
++ Log some non-critical warnings to the error log. Value
++ can be between 0 and 11. Higher values mean more
++ verbosity
++ --long-query-time=# Alias for log_slow_query_time
++ --low-priority-updates
++ INSERT/DELETE/UPDATE has lower priority than selects
++ --lower-case-table-names[=#]
++ If set to 1 table names are stored in lowercase on disk
++ and table names will be case-insensitive. Should be set
++ to 2 if you are using a case insensitive file system
++ --master-info-file=name
++ The location and name of the file that remembers the
++ master and where the I/O replication thread is in the
++ master's binlogs. Defaults to master.info
++ --master-retry-count=#
++ The number of tries the slave will make to connect to the
++ master before giving up
++ --master-verify-checksum
++ Force checksum verification of logged events in the
++ binary log before sending them to slaves or printing them
++ in the output of SHOW BINLOG EVENTS
++ --max-allowed-packet=#
++ Max packet length to send to or receive from the server
++ --max-binlog-cache-size=#
++ Sets the total size of the transactional cache
++ --max-binlog-size=# Binary log will be rotated automatically when the size
++ exceeds this value, unless
++ `binlog_large_commit_threshold` causes rotation
++ prematurely
++ --max-binlog-stmt-cache-size=#
++ Sets the total size of the statement cache
++ --max-binlog-total-size=#
++ Maximum space to use for all binary logs. Extra logs are
++ deleted on server start, log rotation, FLUSH LOGS or when
++ writing to binlog. Default is 0, which means no size
++ restrictions. See also slave_connections_needed_for_purge
++ --max-connect-errors=#
++ If there is more than this number of interrupted
++ connections from a host this host will be blocked from
++ further connections
++ --max-connections=# The number of simultaneous clients allowed
++ --max-delayed-threads=#
++ Don't start more than this number of threads to handle
++ INSERT DELAYED statements. If set to zero INSERT DELAYED
++ will be not used
++ --max-digest-length=#
++ Maximum length considered for digest text
++ --max-error-count=# Max number of errors/warnings to store for a statement
++ --max-heap-table-size=#
++ Don't allow creation of heap tables bigger than this
++ --max-join-size=# Joins that are probably going to read more than
++ max_join_size records return an error
++ --max-length-for-sort-data=#
++ Max number of bytes in sorted records
++ --max-password-errors=#
++ If there is more than this number of failed connect
++ attempts due to invalid password, user will be blocked
++ from further connections until FLUSH_PRIVILEGES
++ --max-prepared-stmt-count=#
++ Maximum number of prepared statements in the server
++ --max-recursive-iterations[=#]
++ Maximum number of iterations when executing recursive
++ queries
++ --max-relay-log-size=#
++ relay log will be rotated automatically when the size
++ exceeds this value. If 0 at startup, it's set to
++ max_binlog_size
++ --max-rowid-filter-size=#
++ The maximum size of the container of a rowid filter
++ --max-seeks-for-key=#
++ Limit assumed max number of seeks when looking up rows
++ based on a key
++ --max-session-mem-used=#
++ Amount of memory a single user session is allowed to
++ allocate. This limits the value of the session variable
++ MEM_USED
++ --max-sort-length=# The number of bytes to use when sorting BLOB or TEXT
++ values (only the first max_sort_length bytes of each
++ value are used; the rest are ignored)
++ --max-sp-recursion-depth[=#]
++ Maximum stored procedure recursion depth
++ --max-statement-time=#
++ A query that has taken more than max_statement_time
++ seconds will be aborted. The argument will be treated as
++ a decimal value with microsecond precision. A value of 0
++ (default) means no timeout
++ --max-tmp-session-space-usage=#
++ The maximum total size of temporary file and temporary
++ table usage. A value of 0 disables this feature
++ --max-tmp-total-space-usage=#
++ The maximum total size of all temporary file and
++ temporary table usage over all connections. A value of 0
++ disables this feature
++ --max-user-connections=#
++ The maximum number of active connections for a single
++ user (0 = no limit)
++ --max-write-lock-count=#
++ After this many write locks, allow some read locks to run
++ in between
++ --memlock Lock mariadbd process in memory
++ --metadata-locks-cache-size=#
++ Unused. Deprecated, will be removed in a future release.
++ --metadata-locks-hash-instances=#
++ Unused. Deprecated, will be removed in a future release.
++ --mhnsw-default-distance=name
++ Distance function to build the vector index for. One of:
++ euclidean, cosine
++ --mhnsw-default-m=# Larger values mean slower SELECTs and INSERTs, larger
++ index size and higher memory consumption but more
++ accurate results
++ --mhnsw-ef-search=# Larger values mean slower SELECTs but more accurate
++ results. Defines the minimal number of result candidates
++ to look for in the vector index for ORDER BY ... LIMIT N
++ queries. The search will never search for less rows than
++ that, even if LIMIT is smaller
++ --mhnsw-max-cache-size=#
++ Upper limit for one MHNSW vector index cache
++ --min-examined-row-limit=#
++ Alias for log_slow_min_examined_row_limit. Don't write
++ queries to slow log that examine fewer rows than that
++ --mrr-buffer-size=# Size of buffer to use when using MRR with range access
++ --myisam-block-size=#
++ Block size to be used for MyISAM index pages
++ --myisam-data-pointer-size=#
++ Default pointer size to be used for MyISAM tables
++ --myisam-max-sort-file-size=#
++ Don't use the fast sort index method to created index if
++ the temporary file would get bigger than this
++ --myisam-mmap-size=#
++ Restricts the total memory used for memory mapping of
++ MyISAM tables
++ --myisam-recover-options[=name]
++ Specifies how corrupted tables should be automatically
++ repaired. Any combination of: DEFAULT, BACKUP, FORCE,
++ QUICK, BACKUP_ALL, OFF, or ALL to set all combinations
++ --myisam-repair-threads=#
++ If larger than 1, when repairing a MyISAM table all
++ indexes will be created in parallel, with one thread per
++ index. The value of 1 disables parallel repair
++ --myisam-sort-buffer-size=#
++ The buffer that is allocated when sorting the index when
++ doing a REPAIR or when creating indexes with CREATE INDEX
++ or ALTER TABLE
++ --myisam-stats-method=name
++ Specifies how MyISAM index statistics collection code
++ should treat NULLs. Possible values of name are
++ NULLS_UNEQUAL (default behavior for 4.1 and later),
++ NULLS_EQUAL (emulate 4.0 behavior), and NULLS_IGNORED
++ --myisam-use-mmap Use memory mapping for reading and writing MyISAM tables
++ --mysql56-temporal-format
++ Use MySQL-5.6 (instead of MariaDB-5.3) format for TIME,
++ DATETIME, TIMESTAMP columns
++ (Defaults to on; use --skip-mysql56-temporal-format to disable.)
++ --net-buffer-length=#
++ Buffer length for TCP/IP and socket communication
++ --net-read-timeout=#
++ Number of seconds to wait for more data from a connection
++ before aborting the read
++ --net-retry-count=# If a read on a communication port is interrupted, retry
++ this many times before giving up
++ --net-write-timeout=#
++ Number of seconds to wait for a block to be written to a
++ connection before aborting the write
++ --new-mode=name Used to introduce new behavior to existing MariaDB
++ versions. Any combination of: FIX_DISK_TMPTABLE_COSTS,
++ FIX_INDEX_STATS_FOR_ALL_NULLS, FIX_INDEX_LOOKUP_COST, or
++ ALL to set all combinations
++ --note-verbosity=name
++ Verbosity level for note-warnings given to the user. See
++ also @@sql_notes. Any combination of: basic,
++ unusable_keys, explain, or ALL to set all combinations
++ --old Use compatible behavior from previous MariaDB version.
++ Deprecated, will be removed in a future release. Please
++ use --old-mode instead.
++ --old-mode=name Used to emulate old behavior from earlier MariaDB or
++ MySQL versions. Any combination of:
++ NO_DUP_KEY_WARNINGS_WITH_IGNORE, NO_PROGRESS_INFO,
++ ZERO_DATE_TIME_CAST, UTF8_IS_UTF8MB3,
++ IGNORE_INDEX_ONLY_FOR_JOIN, COMPAT_5_1_CHECKSUM,
++ NO_NULL_COLLATION_IDS, LOCK_ALTER_TABLE_COPY,
++ OLD_FLUSH_STATUS, SESSION_USER_IS_USER, or ALL to set all
++ combinations
++ --old-passwords Use old password encryption method (needed for 4.0 and
++ older clients)
++ --old-style-user-limits
++ Enable old-style user limits (before 5.0.3, user
++ resources were counted per each user+host vs. per
++ account)
++ --open-files-limit=#
++ If this is not 0, then mariadbd will use this value to
++ reserve file descriptors to use with setrlimit(). If this
++ value is 0 or autoset then mariadbd will reserve
++ max_connections*5 or max_connections + table_cache*2
++ (whichever is larger) number of file descriptors
++ (Automatically configured unless set explicitly)
++ --optimizer-adjust-secondary-key-costs=#
++ Unused. Deprecated, will be removed in a future release.
++ --optimizer-disk-read-cost=#
++ Cost of reading a block of IO_SIZE (4096) from a disk (in
++ usec)
++ --optimizer-disk-read-ratio=#
++ Chance that we have to do a disk read to find a row or
++ index entry from the engine cache
++ (cache_misses/total_cache_requests). 0.0 means that
++ everything is cached and 1.0 means that nothing is
++ expected to be in the engine cache
++ --optimizer-extra-pruning-depth=#
++ If the optimizer needs to enumerate join prefix of this
++ size or larger, then it will try aggressively prune away
++ the search space
++ --optimizer-index-block-copy-cost=#
++ Cost of copying a key block from the cache to internal
++ storage as part of an index scan
++ --optimizer-join-limit-pref-ratio=#
++ For queries with JOIN and ORDER BY LIMIT : make the
++ optimizer consider a join order that allows one to
++ short-cut execution after producing #LIMIT matches if
++ that promises N times speedup. (A conservative setting
++ here would be is a high value, like 100 so the
++ short-cutting plan is used if it promises a speedup of
++ 100x or more). Short-cutting plans are inherently risky
++ so the default is 0 which means do not consider this
++ optimization
++ --optimizer-key-compare-cost=#
++ Cost of checking a key against the end key condition
++ --optimizer-key-copy-cost=#
++ Cost of finding the next key in the engine and copying it
++ to the SQL layer
++ --optimizer-key-lookup-cost=#
++ Cost for finding a key based on a key value
++ --optimizer-key-next-find-cost=#
++ Cost of finding the next key and rowid when using filters
++ --optimizer-max-sel-arg-weight=#
++ The maximum weight of the SEL_ARG graph. Set to 0 for no
++ limit
++ --optimizer-max-sel-args=#
++ The maximum number of SEL_ARG objects created when
++ optimizing a range. If more objects would be needed, the
++ range will not be used by the optimizer
++ --optimizer-prune-level=#
++ Controls the heuristic(s) applied during query
++ optimization to prune less-promising partial plans from
++ the optimizer search space. Meaning: 0 - do not apply any
++ heuristic, thus perform exhaustive search: 1 - prune
++ plans based on cost and number of retrieved rows eq_ref:
++ 2 - prune also if we find an eq_ref chain
++ --optimizer-row-copy-cost=#
++ Cost of copying a row from the engine or the join cache
++ to the SQL layer
++ --optimizer-row-lookup-cost=#
++ Cost of finding a row based on a rowid or a clustered key
++ --optimizer-row-next-find-cost=#
++ Cost of finding the next row when scanning the table
++ --optimizer-rowid-compare-cost=#
++ Cost of comparing two rowid's
++ --optimizer-rowid-copy-cost=#
++ Cost of copying a rowid
++ --optimizer-scan-setup-cost=#
++ Extra cost added to TABLE and INDEX scans to get
++ optimizer to prefer index lookups
++ --optimizer-search-depth=#
++ Maximum depth of search performed by the query optimizer.
++ Values larger than the number of relations in a query
++ result in better query plans, but take longer to compile
++ a query. Values smaller than the number of tables in a
++ relation result in faster optimization, but may produce
++ very bad query plans. If set to 0, the system will
++ automatically pick a reasonable value
++ --optimizer-selectivity-sampling-limit=#
++ Controls number of record samples to check condition
++ selectivity
++ --optimizer-switch=name
++ Fine-tune the optimizer behavior. Takes a comma-separated
++ list of option=value pairs, where value is on, off, or
++ default, and options are: index_merge, index_merge_union,
++ index_merge_sort_union, index_merge_intersection,
++ index_merge_sort_intersection, index_condition_pushdown,
++ derived_merge, derived_with_keys, firstmatch, loosescan,
++ materialization, in_to_exists, semijoin,
++ partial_match_rowid_merge, partial_match_table_scan,
++ subquery_cache, mrr, mrr_cost_based, mrr_sort_keys,
++ outer_join_with_cache, semijoin_with_cache,
++ join_cache_incremental, join_cache_hashed, join_cache_bka,
++ optimize_join_buffer_size, table_elimination,
++ extended_keys, exists_to_in, orderby_uses_equalities,
++ condition_pushdown_for_derived, split_materialized,
++ condition_pushdown_for_subquery, rowid_filter,
++ condition_pushdown_from_having, not_null_range_scan,
++ hash_join_cardinality, cset_narrowing, sargable_casefold
++ --optimizer-trace=name
++ Controls tracing of the Optimizer:
++ optimizer_trace=option=val[,option=val...], where option
++ is one of {enabled} and val is one of {on, off, default}
++ --optimizer-trace-max-mem-size=#
++ Maximum allowed size of an optimizer trace
++ --optimizer-use-condition-selectivity=#
++ Controls selectivity of which conditions the optimizer
++ takes into account to calculate cardinality of a partial
++ join when it searches for the best execution plan
++ Meaning: 1 - use selectivity of index backed range
++ conditions to calculate the cardinality of a partial join
++ if the last joined table is accessed by full table scan
++ or an index scan, 2 - use selectivity of index backed
++ range conditions to calculate the cardinality of a
++ partial join in any case, 3 - additionally always use
++ selectivity of range conditions that are not backed by
++ any index to calculate the cardinality of a partial join,
++ 4 - use histograms to calculate selectivity of range
++ conditions that are not backed by any index to calculate
++ the cardinality of a partial join. 5 - additionally use
++ selectivity of certain non-range predicates calculated on
++ record samples
++ --optimizer-where-cost=#
++ Cost of checking the row against the WHERE clause.
++ Increasing this will have the optimizer to prefer plans
++ with less row combinations
++ --partition[=name] Enable or disable partition plugin. One of: ON, OFF,
++ FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --performance-schema
++ Enable the performance schema
++ --performance-schema-accounts-size=#
++ Maximum number of instrumented user@host accounts. Use 0
++ to disable, -1 for automated sizing
++ --performance-schema-consumer-events-stages-current
++ Default startup value for the events_stages_current
++ consumer
++ --performance-schema-consumer-events-stages-history
++ Default startup value for the events_stages_history
++ consumer
++ --performance-schema-consumer-events-stages-history-long
++ Default startup value for the events_stages_history_long
++ consumer
++ --performance-schema-consumer-events-statements-current
++ Default startup value for the events_statements_current
++ consumer
++ --performance-schema-consumer-events-statements-history
++ Default startup value for the events_statements_history
++ consumer
++ --performance-schema-consumer-events-statements-history-long
++ Default startup value for the
++ events_statements_history_long consumer
++ --performance-schema-consumer-events-transactions-current
++ Default startup value for the events_transactions_current
++ consumer
++ --performance-schema-consumer-events-transactions-history
++ Default startup value for the events_transactions_history
++ consumer
++ --performance-schema-consumer-events-transactions-history-long
++ Default startup value for the
++ events_transactions_history_long consumer
++ --performance-schema-consumer-events-waits-current
++ Default startup value for the events_waits_current
++ consumer
++ --performance-schema-consumer-events-waits-history
++ Default startup value for the events_waits_history
++ consumer
++ --performance-schema-consumer-events-waits-history-long
++ Default startup value for the events_waits_history_long
++ consumer
++ --performance-schema-consumer-global-instrumentation
++ Default startup value for the global_instrumentation
++ consumer
++ (Defaults to on; use --skip-performance-schema-consumer-global-instrumentation to disable.)
++ --performance-schema-consumer-statements-digest
++ Default startup value for the statements_digest consumer
++ (Defaults to on; use --skip-performance-schema-consumer-statements-digest to disable.)
++ --performance-schema-consumer-thread-instrumentation
++ Default startup value for the thread_instrumentation
++ consumer
++ (Defaults to on; use --skip-performance-schema-consumer-thread-instrumentation to disable.)
++ --performance-schema-digests-size=#
++ Size of the statement digest. Use 0 to disable, -1 for
++ automated sizing
++ --performance-schema-events-stages-history-long-size=#
++ Number of rows in EVENTS_STAGES_HISTORY_LONG. Use 0 to
++ disable, -1 for automated sizing
++ --performance-schema-events-stages-history-size=#
++ Number of rows per thread in EVENTS_STAGES_HISTORY. Use 0
++ to disable, -1 for automated sizing
++ --performance-schema-events-statements-history-long-size=#
++ Number of rows in EVENTS_STATEMENTS_HISTORY_LONG. Use 0
++ to disable, -1 for automated sizing
++ --performance-schema-events-statements-history-size=#
++ Number of rows per thread in EVENTS_STATEMENTS_HISTORY.
++ Use 0 to disable, -1 for automated sizing
++ --performance-schema-events-transactions-history-long-size=#
++ Number of rows in EVENTS_TRANSACTIONS_HISTORY_LONG. Use 0
++ to disable, -1 for automated sizing
++ --performance-schema-events-transactions-history-size=#
++ Number of rows per thread in EVENTS_TRANSACTIONS_HISTORY.
++ Use 0 to disable, -1 for automated sizing
++ --performance-schema-events-waits-history-long-size=#
++ Number of rows in EVENTS_WAITS_HISTORY_LONG. Use 0 to
++ disable, -1 for automated sizing
++ --performance-schema-events-waits-history-size=#
++ Number of rows per thread in EVENTS_WAITS_HISTORY. Use 0
++ to disable, -1 for automated sizing
++ --performance-schema-hosts-size=#
++ Maximum number of instrumented hosts. Use 0 to disable,
++ -1 for automated sizing
++ --performance-schema-instrument[=name]
++ Default startup value for a performance schema instrument
++ --performance-schema-max-cond-classes=#
++ Maximum number of condition instruments
++ --performance-schema-max-cond-instances=#
++ Maximum number of instrumented condition objects. Use 0
++ to disable, -1 for automated sizing
++ --performance-schema-max-digest-length=#
++ Maximum length considered for digest text, when stored in
++ performance_schema tables
++ --performance-schema-max-file-classes=#
++ Maximum number of file instruments
++ --performance-schema-max-file-handles=#
++ Maximum number of opened instrumented files
++ --performance-schema-max-file-instances=#
++ Maximum number of instrumented files. Use 0 to disable,
++ -1 for automated sizing
++ --performance-schema-max-index-stat=#
++ Maximum number of index statistics for instrumented
++ tables. Use 0 to disable, -1 for automated scaling
++ --performance-schema-max-memory-classes=#
++ Maximum number of memory pool instruments
++ --performance-schema-max-metadata-locks=#
++ Maximum number of metadata locks. Use 0 to disable, -1
++ for automated scaling
++ --performance-schema-max-mutex-classes=#
++ Maximum number of mutex instruments
++ --performance-schema-max-mutex-instances=#
++ Maximum number of instrumented MUTEX objects. Use 0 to
++ disable, -1 for automated sizing
++ --performance-schema-max-prepared-statements-instances=#
++ Maximum number of instrumented prepared statements. Use 0
++ to disable, -1 for automated scaling
++ --performance-schema-max-program-instances=#
++ Maximum number of instrumented programs. Use 0 to
++ disable, -1 for automated scaling
++ --performance-schema-max-rwlock-classes=#
++ Maximum number of rwlock instruments
++ --performance-schema-max-rwlock-instances=#
++ Maximum number of instrumented RWLOCK objects. Use 0 to
++ disable, -1 for automated sizing
++ --performance-schema-max-socket-classes=#
++ Maximum number of socket instruments
++ --performance-schema-max-socket-instances=#
++ Maximum number of opened instrumented sockets. Use 0 to
++ disable, -1 for automated sizing
++ --performance-schema-max-sql-text-length=#
++ Maximum length of displayed sql text
++ --performance-schema-max-stage-classes=#
++ Maximum number of stage instruments
++ --performance-schema-max-statement-classes=#
++ Maximum number of statement instruments
++ --performance-schema-max-statement-stack=#
++ Number of rows per thread in EVENTS_STATEMENTS_CURRENT
++ --performance-schema-max-table-handles=#
++ Maximum number of opened instrumented tables. Use 0 to
++ disable, -1 for automated sizing
++ --performance-schema-max-table-instances=#
++ Maximum number of instrumented tables. Use 0 to disable,
++ -1 for automated sizing
++ --performance-schema-max-table-lock-stat=#
++ Maximum number of lock statistics for instrumented
++ tables. Use 0 to disable, -1 for automated scaling
++ --performance-schema-max-thread-classes=#
++ Maximum number of thread instruments
++ --performance-schema-max-thread-instances=#
++ Maximum number of instrumented threads. Use 0 to disable,
++ -1 for automated sizing
++ --performance-schema-session-connect-attrs-size=#
++ Size of session attribute string buffer per thread. Use 0
++ to disable, -1 for automated sizing
++ --performance-schema-setup-actors-size=#
++ Maximum number of rows in SETUP_ACTORS
++ --performance-schema-setup-objects-size=#
++ Maximum number of rows in SETUP_OBJECTS
++ --performance-schema-users-size=#
++ Maximum number of instrumented users. Use 0 to disable,
++ -1 for automated sizing
++ --pid-file=name Pid file used by mariadbd-safe
++ --plugin-dir=name Directory for plugins
++ --plugin-load=name Semicolon-separated list of plugins to load, where each
++ plugin is specified as ether a plugin_name=library_file
++ pair or only a library_file. If the latter case, all
++ plugins from a given library_file will be loaded
++ --plugin-load-add=name
++ Optional semicolon-separated list of plugins to load.
++ This option adds to the list specified by --plugin-load
++ in an incremental way. It can be specified many times,
++ adding more plugins every time
++ --plugin-maturity=name
++ The lowest desirable plugin maturity. Plugins less mature
++ than that will not be installed or loaded. One of:
++ unknown, experimental, alpha, beta, gamma, stable
++ -P, --port=# Port number to use for connection or 0 to default to,
++ my.cnf, $MYSQL_TCP_PORT, /etc/services, built-in default
++ (3306), whatever comes first
++ --port-open-timeout=#
++ Maximum time in seconds to wait for the port to become
++ free. (Default: No wait)
++ --preload-buffer-size=#
++ The size of the buffer that is allocated when preloading
++ indexes
++ --profiling-history-size=#
++ Number of statements about which profiling information is
++ maintained. If set to 0, no profiles are stored. See SHOW
++ PROFILES
++ --progress-report-time=#
++ Seconds between sending progress reports to the client
++ for time-consuming statements. Set to 0 to disable
++ progress reporting
++ --proxy-protocol-networks=name
++ Enable proxy protocol for these source networks. The
++ syntax is a comma separated list of IPv4 and IPv6
++ networks. If the network doesn't contain mask, it is
++ considered to be a single host. "*" represents all
++ networks and must be the only directive on the line.
++ String "localhost" represents non-TCP local connections
++ (Unix domain socket, Windows named pipe or shared memory)
++ --query-alloc-block-size=#
++ Allocation block size for query parsing and execution
++ --query-cache-limit=#
++ Don't cache results that are bigger than this
++ --query-cache-min-res-unit=#
++ The minimum size for blocks allocated by the query cache
++ --query-cache-size=#
++ The memory allocated to store results from old queries
++ --query-cache-strip-comments
++ Strip all comments from a query before storing it in the
++ query cache
++ --query-cache-type=name
++ OFF = Don't cache or retrieve results. ON = Cache all
++ results except SELECT SQL_NO_CACHE ... queries. DEMAND =
++ Cache only SELECT SQL_CACHE ... queries
++ --query-cache-wlock-invalidate
++ Invalidate queries in query cache on LOCK for write
++ --query-prealloc-size=#
++ Persistent buffer for query parsing and execution
++ --range-alloc-block-size=#
++ Allocation block size for storing ranges during
++ optimization
++ --read-binlog-speed-limit=#
++ Maximum speed(KB/s) to read binlog from master (0 = no
++ limit)
++ --read-buffer-size=#
++ Each thread that does a sequential scan allocates a
++ buffer of this size for each table it scans. If you do
++ many sequential scans, you may want to increase this
++ value
++ --read-only Make all non-temporary tables read-only, with the
++ exception for replication (slave) threads and users with
++ the 'READ ONLY ADMIN' privilege
++ --read-rnd-buffer-size=#
++ When reading rows in sorted order after a sort, the rows
++ are read through this buffer to avoid a disk seeks
++ --redirect-url=name URL of another server to redirect clients to. Empty
++ string means no redirection
++ --relay-log=name The location and name to use for relay logs
++ --relay-log-index=name
++ The location and name to use for the file that keeps a
++ list of the last relay logs
++ --relay-log-info-file=name
++ The location and name of the file that remembers where
++ the SQL replication thread is in the relay logs
++ --relay-log-purge if disabled - do not purge relay logs. if enabled - purge
++ them as soon as they are no more needed
++ (Defaults to on; use --skip-relay-log-purge to disable.)
++ --relay-log-recovery
++ Enables automatic relay log recovery right after the
++ database startup, which means that the IO Thread starts
++ re-fetching from the master right after the last
++ transaction processed
++ --relay-log-space-limit=#
++ Maximum space to use for all relay logs
++ --replicate-annotate-row-events
++ Tells the slave to write annotate rows events received
++ from the master to its own binary log. Ignored if
++ log_slave_updates is not set
++ (Defaults to on; use --skip-replicate-annotate-row-events to disable.)
++ --replicate-do-db=name
++ Tells the slave thread to restrict replication to the
++ specified database. To specify more than one database,
++ use the directive multiple times, once for each database.
++ Note that this will only work if you do not use
++ cross-database queries such as UPDATE some_db.some_table
++ SET foo='bar' while having selected a different or no
++ database. If you need cross database updates to work,
++ make sure you have 3.23.28 or later, and use
++ replicate-wild-do-table=db_name.%
++ --replicate-do-table=name
++ Tells the slave thread to restrict replication to the
++ specified table. To specify more than one table, use the
++ directive multiple times, once for each table. This will
++ work for cross-database updates, in contrast to
++ replicate-do-db
++ --replicate-events-marked-for-skip=name
++ Whether the slave should replicate events that were
++ created with @@skip_replication=1 on the master. Default
++ REPLICATE (no events are skipped). Other values are
++ FILTER_ON_SLAVE (events will be sent by the master but
++ ignored by the slave) and FILTER_ON_MASTER (events marked
++ with @@skip_replication=1 will be filtered on the master
++ and never be sent to the slave)
++ --replicate-ignore-db=name
++ Tells the slave thread to not replicate to the specified
++ database. To specify more than one database to ignore,
++ use the directive multiple times, once for each database.
++ This option will not work if you use cross database
++ updates. If you need cross database updates to work, make
++ sure you have 3.23.28 or later, and use
++ replicate-wild-ignore-table=db_name.%.
++ --replicate-ignore-table=name
++ Tells the slave thread to not replicate to the specified
++ table. To specify more than one table to ignore, use the
++ directive multiple times, once for each table. This will
++ work for cross-database updates, in contrast to
++ replicate-ignore-db
++ --replicate-rewrite-db=name
++ Updates to a database with a different name than the
++ original. Example:
++ replicate-rewrite-db=master_db_name->slave_db_name
++ --replicate-same-server-id
++ In replication, if set to 1, do not skip events having
++ our server id. Default value is 0 (to break infinite
++ loops in circular replication). Can't be set to 1 if
++ --log-slave-updates is used
++ --replicate-wild-do-table=name
++ Tells the slave thread to restrict replication to the
++ tables that match the specified wildcard pattern. To
++ specify more than one table, use the directive multiple
++ times, once for each table. This will work for
++ cross-database updates. Example:
++ replicate-wild-do-table=foo%.bar% will replicate only
++ updates to tables in all databases that start with foo
++ and whose table names start with bar
++ --replicate-wild-ignore-table=name
++ Tells the slave thread to not replicate to the tables
++ that match the given wildcard pattern. To specify more
++ than one table to ignore, use the directive multiple
++ times, once for each table. This will work for
++ cross-database updates. Example:
++ replicate-wild-ignore-table=foo%.bar% will not do updates
++ to tables in databases that start with foo and whose
++ table names start with bar
++ --report-host=name Hostname or IP of the slave to be reported to the master
++ during slave registration. Will appear in the output of
++ SHOW SLAVE HOSTS. Leave unset if you do not want the
++ slave to register itself with the master. Note that it is
++ not sufficient for the master to simply read the IP of
++ the slave off the socket once the slave connects. Due to
++ NAT and other routing issues, that IP may not be valid
++ for connecting to the slave from the master or other
++ hosts
++ --report-password=name
++ The account password of the slave to be reported to the
++ master during slave registration
++ --report-port=# Port for connecting to slave reported to the master
++ during slave registration. Set it only if the slave is
++ listening on a non-default port or if you have a special
++ tunnel from the master or other clients to the slave. If
++ not sure, leave this option unset
++ --report-user=name The account user name of the slave to be reported to the
++ master during slave registration
++ --require-secure-transport
++ When this option is enabled, connections attempted using
++ insecure transport will be rejected. Secure transports
++ are SSL/TLS, Unix sockets or named pipes
++ --rowid-merge-buff-size=#
++ The size of the buffers used [NOT] IN evaluation via
++ partial matching
++ --rpl-semi-sync-master-enabled
++ Enable semi-synchronous replication master (disabled by
++ default)
++ --rpl-semi-sync-master-timeout=#
++ The timeout value (in ms) for semi-synchronous
++ replication in the master
++ --rpl-semi-sync-master-trace-level=#
++ The tracing level for semi-sync replication
++ --rpl-semi-sync-master-wait-no-slave
++ Wait until timeout when no semi-synchronous replication
++ slave is available
++ (Defaults to on; use --skip-rpl-semi-sync-master-wait-no-slave to disable.)
++ --rpl-semi-sync-master-wait-point=name
++ Should transaction wait for semi-sync ack after having
++ synced binlog, or after having committed in storage
++ engine. One of: AFTER_SYNC, AFTER_COMMIT
++ --rpl-semi-sync-slave-delay-master
++ Only write master info file when ack is needed
++ --rpl-semi-sync-slave-enabled
++ Enable semi-synchronous replication slave (disabled by
++ default)
++ --rpl-semi-sync-slave-kill-conn-timeout[=#]
++ Timeout for the MariaDB connection used to kill the slave
++ io_thread's connection on master. This timeout comes into
++ play when stop slave is executed
++ --rpl-semi-sync-slave-trace-level=#
++ The tracing level for semi-sync replication
++ --safe-mode Skip some optimize stages (for testing). Deprecated, will
++ be removed in a future release.
++ --safe-user-create Don't allow new user creation by the user who has no
++ write privileges to the mysql.user table
++ --secure-auth Disallow authentication for accounts that have old
++ (pre-4.1) passwords. Deprecated, will be removed in a
++ future release.
++ (Defaults to on; use --skip-secure-auth to disable.)
++ --secure-file-priv=name
++ Limit LOAD DATA, SELECT ... OUTFILE, and LOAD_FILE() to
++ files within specified directory
++ --secure-timestamp=name
++ Restricts direct setting of a session timestamp. Possible
++ levels are: YES - timestamp cannot deviate from the
++ system clock, REPLICATION - replication thread can adjust
++ timestamp to match the master's, SUPER - a user with this
++ privilege and a replication thread can adjust timestamp,
++ NO - historical behavior, anyone can modify session
++ timestamp
++ --sequence[=name] Enable or disable SEQUENCE plugin. One of: ON, OFF, FORCE
++ (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --server-id=# Uniquely identifies the server instance in the community
++ of replication partners
++ --session-track-schema
++ Track changes to the default schema
++ (Defaults to on; use --skip-session-track-schema to disable.)
++ --session-track-state-change
++ Track changes to the session state
++ --session-track-system-variables=name
++ Track changes in registered system variables
++ --session-track-transaction-info=name
++ Track changes to the transaction attributes. OFF to
++ disable; STATE to track just transaction state (Is there
++ an active transaction? Does it have any data? etc.);
++ CHARACTERISTICS to track transaction state and report all
++ statements needed to start a transaction with the same
++ characteristics (isolation level, read only/read write,
++ snapshot - but not any work done / data modified within
++ the transaction)
++ --show-slave-auth-info
++ Show user and password in SHOW SLAVE HOSTS on this master
++ --silent-startup Don't print [Note] to the error log during startup
++ --skip-grant-tables Start without grant tables. This gives all users FULL
++ ACCESS to all tables
++ --skip-host-cache Don't cache host names
++ --skip-name-resolve Don't resolve hostnames. All hostnames are IP's or
++ 'localhost'
++ --skip-networking Don't allow connection with TCP/IP
++ --skip-show-database
++ Don't allow 'SHOW DATABASE' commands
++ --skip-slave-start If set, slave is not autostarted
++ --slave-abort-blocking-timeout=#
++ Maximum time a slave DDL will wait for a blocking SELECT
++ or other user query until that query will be aborted. The
++ argument will be treated as a decimal value with
++ nanosecond precision
++ --slave-compressed-protocol
++ Use compression on master/slave protocol
++ --slave-connections-needed-for-purge=#
++ Minimum number of connected slaves required for automatic
++ binary log purge with max_binlog_total_size,
++ binlog_expire_logs_seconds or binlog_expire_logs_days.
++ Default is 0 when Galera is enabled and 1 otherwise
++ --slave-ddl-exec-mode=name
++ How replication events should be executed. Legal values
++ are STRICT and IDEMPOTENT (default). In IDEMPOTENT mode,
++ replication will not stop for DDL operations that are
++ idempotent. This means that CREATE TABLE is treated as
++ CREATE TABLE OR REPLACE and DROP TABLE is treated as DROP
++ TABLE IF EXISTS
++ --slave-domain-parallel-threads=#
++ Maximum number of parallel threads to use on slave for
++ events in a single replication domain. When using
++ multiple domains, this can be used to limit a single
++ domain from grabbing all threads and thus stalling other
++ domains. The default of 0 means to allow a domain to grab
++ as many threads as it wants, up to the value of
++ slave_parallel_threads
++ --slave-exec-mode=name
++ How replication events should be executed. Legal values
++ are STRICT (default) and IDEMPOTENT. In IDEMPOTENT mode,
++ replication will not stop for operations that are
++ idempotent. For example, in row based replication
++ attempts to delete rows that doesn't exist will be
++ ignored. In STRICT mode, replication will stop on any
++ unexpected difference between the master and the slave
++ --slave-load-tmpdir=name
++ The location where the slave should put its temporary
++ files when replicating a LOAD DATA INFILE command
++ --slave-max-allowed-packet=#
++ The maximum packet length to sent successfully from the
++ master to slave
++ --slave-max-statement-time=#
++ A query that has taken more than slave_max_statement_time
++ seconds to run on the slave will be aborted. The argument
++ will be treated as a decimal value with microsecond
++ precision. A value of 0 (default) means no timeout
++ --slave-net-timeout=#
++ Number of seconds to wait for more data from any
++ master/slave connection before aborting the read
++ --slave-parallel-max-queued=#
++ Limit on how much memory SQL threads should use per
++ parallel replication thread when reading ahead in the
++ relay log looking for opportunities for parallel
++ replication. Only used when --slave-parallel-threads > 0
++ --slave-parallel-mode=name
++ Controls what transactions are applied in parallel when
++ using --slave-parallel-threads. Possible values:
++ "optimistic" tries to apply most transactional DML in
++ parallel, and handles any conflicts with rollback and
++ retry. "conservative" limits parallelism in an effort to
++ avoid any conflicts. "aggressive" tries to maximise the
++ parallelism, possibly at the cost of increased conflict
++ rate. "minimal" only parallelizes the commit steps of
++ transactions. "none" disables parallel apply completely
++ --slave-parallel-threads=#
++ If non-zero, number of threads to spawn to apply in
++ parallel events on the slave that were group-committed on
++ the master or were logged with GTID in different
++ replication domains. Note that these threads are in
++ addition to the IO and SQL threads, which are always
++ created by a replication slave
++ --slave-parallel-workers=#
++ Alias for slave_parallel_threads
++ --slave-run-triggers-for-rbr=name
++ Modes for how triggers in row-base replication on slave
++ side will be executed. Legal values are NO (default),
++ YES, LOGGING and ENFORCE. NO means that trigger for RBR
++ will not be running on slave. YES and LOGGING means that
++ triggers will be running on slave, if there was not
++ triggers running on the master for the statement. LOGGING
++ also means results of that the executed triggers work
++ will be written to the binlog. ENFORCE means that
++ triggers will always be run on the slave, even if there
++ are triggers on the master. ENFORCE implies LOGGING
++ --slave-skip-errors=name
++ Tells the slave thread to continue replication when a
++ query event returns an error from the provided list
++ --slave-sql-verify-checksum
++ Force checksum verification of replication events after
++ reading them from relay log. Note: Events are always
++ checksum-verified by slave on receiving them from the
++ network before writing them to the relay log
++ (Defaults to on; use --skip-slave-sql-verify-checksum to disable.)
++ --slave-transaction-retries=#
++ Number of times the slave SQL thread will retry a
++ transaction in case it failed with a deadlock, elapsed
++ lock wait timeout or listed in
++ slave_transaction_retry_errors, before giving up and
++ stopping
++ --slave-transaction-retry-errors=name
++ Tells the slave thread to retry transaction for
++ replication when a query event returns an error from the
++ provided list. Deadlock error, elapsed lock wait timeout,
++ net read error, net read timeout, net write error, net
++ write timeout, connect error and 2 types of lost
++ connection error are automatically added to this list
++ --slave-transaction-retry-interval=#
++ Interval of the slave SQL thread will retry a transaction
++ in case it failed with a deadlock or elapsed lock wait
++ timeout or listed in slave_transaction_retry_errors
++ --slave-type-conversions=name
++ Set of slave type conversions that are enabled. If the
++ variable is empty, no conversions are allowed and it is
++ expected that the types match exactly. Any combination
++ of: ALL_LOSSY, ALL_NON_LOSSY, or ALL to set all
++ combinations
++ --slow-launch-time=#
++ If creating the thread takes longer than this value (in
++ seconds), the Slow_launch_threads counter will be
++ incremented
++ --slow-query-log Alias for log_slow_query. Log slow queries to a table or
++ log file. Defaults logging to a file 'hostname'-slow.log
++ or a table mysql.slow_log if --log-output=TABLE is used.
++ Must be enabled to activate other slow log options
++ --slow-query-log-file=name
++ Alias for log_slow_query_file. Log slow queries to given
++ log file. Defaults logging to 'hostname'-slow.log. Must
++ be enabled to activate other slow log options
++ --socket=name Socket file to use for connection
++ --sort-buffer-size=#
++ Each thread that needs to do a sort allocates a buffer of
++ this size
++ --sql-mode=name Sets the sql mode. Any combination of: REAL_AS_FLOAT,
++ PIPES_AS_CONCAT, ANSI_QUOTES, IGNORE_SPACE,
++ IGNORE_BAD_TABLE_OPTIONS, ONLY_FULL_GROUP_BY,
++ NO_UNSIGNED_SUBTRACTION, NO_DIR_IN_CREATE, POSTGRESQL,
++ ORACLE, MSSQL, DB2, MAXDB, NO_KEY_OPTIONS,
++ NO_TABLE_OPTIONS, NO_FIELD_OPTIONS, MYSQL323, MYSQL40,
++ ANSI, NO_AUTO_VALUE_ON_ZERO, NO_BACKSLASH_ESCAPES,
++ STRICT_TRANS_TABLES, STRICT_ALL_TABLES, NO_ZERO_IN_DATE,
++ NO_ZERO_DATE, ALLOW_INVALID_DATES,
++ ERROR_FOR_DIVISION_BY_ZERO, TRADITIONAL,
++ NO_AUTO_CREATE_USER, HIGH_NOT_PRECEDENCE,
++ NO_ENGINE_SUBSTITUTION, PAD_CHAR_TO_FULL_LENGTH,
++ EMPTY_STRING_IS_NULL, SIMULTANEOUS_ASSIGNMENT,
++ TIME_ROUND_FRACTIONAL, or ALL to set all combinations
++ --sql-safe-updates If set to 1, UPDATEs and DELETEs need either a key in the
++ WHERE clause, or a LIMIT clause, or else they will
++ aborted. Prevents the common mistake of accidentally
++ deleting or updating every row in a table
++ --ssl Enable SSL for connection (automatically enabled if an
++ ssl option is used)
++ (Defaults to on; use --skip-ssl to disable.)
++ --ssl-ca=name CA file in PEM format (check OpenSSL docs, implies --ssl)
++ --ssl-capath=name CA directory (check OpenSSL docs, implies --ssl)
++ --ssl-cert=name X509 cert in PEM format (implies --ssl)
++ --ssl-cipher=name SSL cipher to use (implies --ssl)
++ --ssl-crl=name CRL file in PEM format (check OpenSSL docs, implies
++ --ssl)
++ --ssl-crlpath=name CRL directory (check OpenSSL docs, implies --ssl)
++ --ssl-key=name X509 key in PEM format (implies --ssl)
++ --stack-trace Print a symbolic stack trace on failure
++ (Defaults to on; use --skip-stack-trace to disable.)
++ --standard-compliant-cte
++ Allow only CTEs compliant to SQL standard
++ (Defaults to on; use --skip-standard-compliant-cte to disable.)
++ --stored-program-cache=#
++ The soft upper limit for number of cached stored routines
++ for one connection
++ --strict-password-validation
++ When password validation plugins are enabled, reject
++ passwords that cannot be validated (passwords specified
++ as a hash)
++ (Defaults to on; use --skip-strict-password-validation to disable.)
++ -s, --symbolic-links
++ Enable symbolic link support
++ (Defaults to on; use --skip-symbolic-links to disable.)
++ --sync-binlog=# Synchronously flush binary log to disk after every #th
++ event. Use 0 (default) to disable synchronous flushing
++ --sync-frm Sync .frm files to disk on creation
++ (Defaults to on; use --skip-sync-frm to disable.)
++ --sync-master-info=#
++ Synchronously flush master info to disk after every #th
++ event. Use 0 to disable synchronous flushing
++ --sync-relay-log=# Synchronously flush relay log to disk after every #th
++ event. Use 0 to disable synchronous flushing
++ --sync-relay-log-info=#
++ Synchronously flush relay log info to disk after every
++ #th transaction. Use 0 to disable synchronous flushing
++ --sysdate-is-now Non-default option to alias SYSDATE() to NOW() to make it
++ safe-replicable. Since 5.0, SYSDATE() returns a `dynamic'
++ value different for different invocations, even within
++ the same statement
++ --system-versioning-alter-history=name
++ Versioning ALTER TABLE mode. ERROR: Fail ALTER with
++ error; KEEP: Keep historical system rows and subject them
++ to ALTER
++ --system-versioning-insert-history
++ Allows direct inserts into ROW_START and ROW_END columns
++ if secure_timestamp allows changing @@timestamp
++ --table-cache=# Sets table_open_cache. Deprecated, will be removed in a
++ future release. Please use --table-open-cache instead.
++ --table-definition-cache=#
++ The number of cached table definitions
++ --table-open-cache=#
++ The number of cached open tables
++ --table-open-cache-instances=#
++ Maximum number of table cache instances
++ --tc-heuristic-recover=name
++ Decision to use in heuristic recover process. One of: OFF,
++ COMMIT, ROLLBACK
++ --tcp-keepalive-interval=#
++ The interval, in seconds, between when successive
++ keep-alive packets are sent if no acknowledgement is
++ received. If set to 0, system dependent default is used
++ (Automatically configured unless set explicitly)
++ --tcp-keepalive-probes=#
++ The number of unacknowledged probes to send before
++ considering the connection dead and notifying the
++ application layer. If set to 0, system dependent default
++ is used (Automatically configured unless set explicitly)
++ --tcp-keepalive-time=#
++ Timeout, in seconds, with no activity until the first TCP
++ keep-alive packet is sent. If set to 0, system dependent
++ default is used (Automatically configured unless set
++ explicitly)
++ --tcp-nodelay Set option TCP_NODELAY (disable Nagle's algorithm) on
++ socket
++ (Defaults to on; use --skip-tcp-nodelay to disable.)
++ --temp-pool Using this option will cause most temporary files created
++ to use a small set of names, rather than a unique name
++ for each new file. Deprecated, will be removed in a
++ future release.
++ --thread-cache-size=#
++ How many threads we should keep in a cache for reuse.
++ These are freed after 5 minutes of idle time
++ --thread-handling=name
++ Define threads usage for handling queries. One of:
++ one-thread-per-connection, no-threads, pool-of-threads
++ --thread-pool-dedicated-listener
++ If set to 1,listener thread will not pick up queries
++ --thread-pool-exact-stats
++ If set to 1, provides better statistics in
++ information_schema threadpool tables
++ --thread-pool-groups[=name]
++ Enable or disable THREAD_POOL_GROUPS plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --thread-pool-idle-timeout=#
++ Timeout in seconds for an idle thread in the thread pool.
++ Worker thread will be shut down after timeout
++ --thread-pool-max-threads=#
++ Maximum allowed number of worker threads in the thread
++ pool
++ --thread-pool-oversubscribe=#
++ How many additional active worker threads in a group are
++ allowed
++ --thread-pool-prio-kickup-timer=#
++ The number of milliseconds before a dequeued low-priority
++ statement is moved to the high-priority queue
++ --thread-pool-priority=name
++ Threadpool priority. High priority connections usually
++ start executing earlier than low priority. If priority
++ set to 'auto', the the actual priority(low or high) is
++ determined based on whether or not connection is inside
++ transaction
++ --thread-pool-queues[=name]
++ Enable or disable THREAD_POOL_QUEUES plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --thread-pool-size=#
++ Number of thread groups in the pool. This parameter is
++ roughly equivalent to maximum number of concurrently
++ executing threads (threads in a waiting state do not
++ count as executing)
++ --thread-pool-stall-limit=#
++ Maximum query execution time in milliseconds, before an
++ executing non-yielding thread is considered stalled. If a
++ worker thread is stalled, additional worker thread may be
++ created to handle remaining clients
++ --thread-pool-stats[=name]
++ Enable or disable THREAD_POOL_STATS plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --thread-pool-waits[=name]
++ Enable or disable THREAD_POOL_WAITS plugin. One of: ON,
++ OFF, FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --thread-stack=# The stack size for each thread
++ --tls-version=name TLS protocol version for secure connections. Any
++ combination of: TLSv1.0, TLSv1.1, TLSv1.2, TLSv1.3, or
++ ALL to set all combinations
++ --tmp-disk-table-size=#
++ Max size for data for an internal temporary on-disk
++ MyISAM or Aria table
++ --tmp-memory-table-size=#
++ If an internal in-memory temporary table exceeds this
++ size, MariaDB will automatically convert it to an on-disk
++ MyISAM or Aria table. Same as tmp_table_size
++ --tmp-table-size=# Alias for tmp_memory_table_size. If an internal in-memory
++ temporary table exceeds this size, MariaDB will
++ automatically convert it to an on-disk MyISAM or Aria
++ table
++ -t, --tmpdir=name Path for temporary files. Files that are created in
++ background for binlogging by user threads are placed in a
++ separate location (see `binlog_large_commit_threshold`
++ option). Several paths may be specified, separated by a
++ colon (:), in this case they are used in a round-robin
++ fashion
++ --transaction-alloc-block-size=#
++ Allocation block size for transactions to be stored in
++ binary log
++ --transaction-isolation=name
++ Default transaction isolation level. One of:
++ READ-UNCOMMITTED, READ-COMMITTED, REPEATABLE-READ,
++ SERIALIZABLE
++ --transaction-prealloc-size=#
++ Persistent buffer for transactions to be stored in binary
++ log
++ --transaction-read-only
++ Default transaction access mode. True if transactions are
++ read-only
++ --unix-socket[=name]
++ Enable or disable unix_socket plugin. One of: ON, OFF,
++ FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --updatable-views-with-limit=name
++ YES = Don't issue an error message (warning only) if a
++ VIEW without presence of a key of the underlying table is
++ used in queries with a LIMIT clause for updating. NO =
++ Prohibit update of a VIEW, which does not contain a key
++ of the underlying table and the query uses a LIMIT clause
++ (usually get from GUI tools)
++ --use-stat-tables=name
++ Specifies how to use system statistics tables. One of:
++ NEVER, COMPLEMENTARY, PREFERABLY,
++ COMPLEMENTARY_FOR_QUERIES, PREFERABLY_FOR_QUERIES
++ -u, --user=name User to run mariadbd process as
++ --user-variables[=name]
++ Enable or disable user_variables plugin. One of: ON, OFF,
++ FORCE (don't start if the plugin fails to load),
++ FORCE_PLUS_PERMANENT (like FORCE, but the plugin can not
++ be uninstalled).
++ --userstat Enables statistics gathering for USER_STATISTICS,
++ CLIENT_STATISTICS, INDEX_STATISTICS and TABLE_STATISTICS
++ tables in the INFORMATION_SCHEMA
++ -v, --verbose Used with --help option for detailed help
++ -V, --version[=name]
++ Output version information and exit
++ --wait-timeout=# The number of seconds the server waits for activity on a
++ connection before closing it
++ --wsrep-OSU-method[=name]
++ Method for Online Schema Upgrade. One of: TOI, RSU
++ --wsrep-SR-store=name
++ Storage for streaming replication fragments. One of: none,
++ table
++ --wsrep-allowlist=name
++ Allowed IP addresses split by comma delimiter
++ --wsrep-auto-increment-control
++ To automatically control the assignment of autoincrement
++ variables
++ (Defaults to on; use --skip-wsrep-auto-increment-control to disable.)
++ --wsrep-certification-rules=name
++ Certification rules to use in the cluster. Possible
++ values are: "strict": stricter rules that could result in
++ more certification failures. "optimized": relaxed rules
++ that allow more concurrency and cause less certification
++ failures
++ --wsrep-certify-nonPK
++ Certify tables with no primary key
++ (Defaults to on; use --skip-wsrep-certify-nonPK to disable.)
++ --wsrep-cluster-address=name
++ Address to initially connect to cluster
++ --wsrep-cluster-name=name
++ Name for the cluster
++ --wsrep-convert-LOCK-to-trx
++ To convert locking sessions into transactions
++ --wsrep-data-home-dir=name
++ home directory for wsrep provider
++ --wsrep-dbug-option=name
++ DBUG options to provider library
++ --wsrep-debug=name WSREP debug level logging. One of: NONE, SERVER,
++ TRANSACTION, STREAMING, CLIENT
++ --wsrep-desync To desynchronize the node from the cluster
++ --wsrep-dirty-reads Allow reads even when the node is not in the primary
++ component
++ --wsrep-drupal-282555-workaround
++ Enable a workaround to handle the cases where inserting a
++ DEFAULT value into an auto-increment column could fail
++ with duplicate key error
++ --wsrep-forced-binlog-format=name
++ binlog format to take effect over user's choice. One of:
++ MIXED, STATEMENT, ROW, NONE
++ --wsrep-gtid-domain-id=#
++ When wsrep_gtid_mode is set, this value is used as
++ gtid_domain_id for galera transactions and also copied to
++ the joiner nodes during state transfer. It is ignored,
++ otherwise
++ --wsrep-gtid-mode Automatically update the (joiner) node's
++ wsrep_gtid_domain_id value with that of donor's (received
++ during state transfer) and use it in place of
++ gtid_domain_id for all galera transactions. When OFF
++ (default), wsrep_gtid_domain_id is simply ignored
++ (backward compatibility)
++ --wsrep-ignore-apply-errors=#
++ Ignore replication errors
++ --wsrep-log-conflicts
++ To log multi-master conflicts
++ --wsrep-max-ws-rows=#
++ Max number of rows in write set
++ --wsrep-max-ws-size=#
++ Max write set size (bytes)
++ --wsrep-mode=name Set of WSREP features that are enabled. Any combination
++ of: STRICT_REPLICATION, BINLOG_ROW_FORMAT_ONLY,
++ REQUIRED_PRIMARY_KEY, REPLICATE_MYISAM, REPLICATE_ARIA,
++ DISALLOW_LOCAL_GTID, BF_ABORT_MARIABACKUP, or ALL to set
++ all combinations
++ --wsrep-mysql-replication-bundle=#
++ Number of replication events that are grouped together
++ --wsrep-new-cluster Bootstrap a cluster. It works by overriding the current
++ value of wsrep_cluster_address. It is recommended not to
++ add this option to the config file as this will trigger
++ bootstrap on every server start
++ --wsrep-node-address=name
++ Specifies the node's network address, in the format ip
++ address[:port]. Used in situations where autoguessing is
++ not reliable. As of MariaDB 10.1.8, supports IPv6
++ --wsrep-node-incoming-address=name
++ Client connection address
++ --wsrep-node-name=name
++ Name of this node. This name can be used in
++ wsrep_sst_donor as a preferred donor. Note that multiple
++ nodes in a cluster can have the same name
++ --wsrep-notify-cmd=name
++ --wsrep-on To enable wsrep replication
++ --wsrep-provider=name
++ Path to replication provider library
++ --wsrep-provider-options=name
++ Semicolon (;) separated list of wsrep options (see
++ wsrep_provider_options documentation)
++ --wsrep-recover Recover database state after crash and exit
++ --wsrep-reject-queries[=name]
++ Variable to set to reject queries. One of: NONE, ALL,
++ ALL_KILL
++ --wsrep-restart-slave
++ Should MariaDB slave be restarted automatically, when
++ node joins back to cluster
++ --wsrep-retry-autocommit=#
++ Max number of times to retry a failed autocommit
++ statement
++ --wsrep-slave-FK-checks
++ Should slave thread do foreign key constraint checks
++ (Defaults to on; use --skip-wsrep-slave-FK-checks to disable.)
++ --wsrep-slave-UK-checks
++ Should slave thread do secondary index uniqueness checks
++ --wsrep-slave-threads=#
++ Number of slave appliers to launch
++ --wsrep-sst-auth=name
++ Authentication for SST connection
++ --wsrep-sst-donor=name
++ preferred donor node for the SST
++ --wsrep-sst-donor-rejects-queries
++ Reject client queries when donating state snapshot
++ transfer
++ --wsrep-sst-method=name
++ State snapshot transfer method
++ --wsrep-sst-receive-address=name
++ Address where node is waiting for SST contact
++ --wsrep-start-position=name
++ global transaction position to start from
++ --wsrep-status-file=name
++ wsrep status output filename
++ --wsrep-sync-wait[=#]
++ Ensure "synchronous" read view before executing an
++ operation of the type specified by bitmask: 1 -
++ READ(includes SELECT, SHOW and BEGIN/START TRANSACTION);
++ 2 - UPDATE and DELETE; 4 - INSERT and REPLACE
++ --wsrep-trx-fragment-size=#
++ Size of transaction fragments for streaming replication
++ (measured in units of 'wsrep_trx_fragment_unit')
++ --wsrep-trx-fragment-unit=name
++ Unit for streaming replication transaction fragments'
++ size: bytes, rows, statements
++
++Variables (--variable-name=value)
++and boolean options {FALSE|TRUE} Value (after reading options)
++------------------------------------------------------------ -------------
++allow-suspicious-udfs FALSE
++alter-algorithm DEFAULT
++analyze-max-length 4294967295
++analyze-sample-percentage 100
++aria-block-size 8192
++aria-checkpoint-interval 0
++aria-checkpoint-log-activity 1048576
++aria-encrypt-tables FALSE
++aria-force-start-after-recovery-failures 0
++aria-group-commit none
++aria-group-commit-interval 0
++aria-log-dir-path /var/lib/mysql/
++aria-log-file-size 1073741824
++aria-log-purge-type immediate
++aria-max-sort-file-size 9223372036853727232
++aria-page-checksum TRUE
++aria-pagecache-age-threshold 300
++aria-pagecache-buffer-size 134217728
++aria-pagecache-division-limit 100
++aria-pagecache-file-hash-size 512
++aria-recover-options
++aria-repair-threads 1
++aria-sort-buffer-size 268434432
++aria-stats-method nulls_unequal
++aria-sync-log-dir NEWFILE
++auto-increment-increment 1
++auto-increment-offset 1
++autocommit TRUE
++automatic-sp-privileges TRUE
++back-log 80
++basedir /usr
++big-tables FALSE
++bind-address 127.0.0.1
++binlog-alter-two-phase FALSE
++binlog-annotate-row-events TRUE
++binlog-cache-size 32768
++binlog-checksum CRC32
++binlog-commit-wait-count 0
++binlog-commit-wait-usec 100000
++binlog-direct-non-transactional-updates FALSE
++binlog-expire-logs-seconds 864000
++binlog-file-cache-size 16384
++binlog-format MIXED
++binlog-gtid-index TRUE
++binlog-gtid-index-page-size 4096
++binlog-gtid-index-span-min 65536
++binlog-large-commit-threshold 134217728
++binlog-legacy-event-pos FALSE
++binlog-optimize-thread-scheduling TRUE
++binlog-row-event-max-size 8192
++binlog-row-image FULL
++binlog-row-metadata NO_LOG
++binlog-space-limit 0
++binlog-stmt-cache-size 32768
++block-encryption-mode aes-128-ecb
++bulk-insert-buffer-size 8388608
++character-set-client-handshake TRUE
++character-set-collations utf8mb3=uca1400_ai_ci,utf8mb4=uca1400_ai_ci,ucs2=uca1400_ai_ci,utf16=uca1400_ai_ci,utf32=uca1400_ai_ci
++character-set-filesystem binary
++character-set-server utf8mb4
++character-sets-dir /usr/share/mariadb/charsets/
++chroot (No default value)
++collation-server utf8mb4_uca1400_ai_ci
++column-compression-threshold 100
++column-compression-zlib-level 6
++column-compression-zlib-strategy DEFAULT_STRATEGY
++column-compression-zlib-wrap FALSE
++completion-type NO_CHAIN
++concurrent-insert AUTO
++connect-timeout 10
++console FALSE
++core-file FALSE
++datadir /var/lib/mysql/
++deadlock-search-depth-long 15
++deadlock-search-depth-short 4
++deadlock-timeout-long 50000000
++deadlock-timeout-short 10000
++debug
++debug-abort-slave-event-count 0
++debug-disconnect-slave-event-count 0
++debug-gdb FALSE
++debug-max-binlog-dump-events 0
++debug-no-sync FALSE
++debug-sporadic-binlog-dump-fail FALSE
++default-password-lifetime 0
++default-regex-flags
++default-storage-engine InnoDB
++default-time-zone (No default value)
++default-tmp-storage-engine (No default value)
++default-week-format 0
++delay-key-write ON
++delayed-insert-limit 100
++delayed-insert-timeout 300
++delayed-queue-size 1000
++des-key-file (No default value)
++disconnect-on-expired-password FALSE
++div-precision-increment 4
++encrypt-binlog FALSE
++encrypt-tmp-disk-tables FALSE
++encrypt-tmp-files FALSE
++enforce-storage-engine (No default value)
++eq-range-index-dive-limit 200
++event-scheduler OFF
++expensive-subquery-limit 100
++expire-logs-days 10
++explicit-defaults-for-timestamp TRUE
++external-locking FALSE
++extra-max-connections 1
++extra-port 0
++feedback ON
++feedback-http-proxy (No default value)
++feedback-send-retry-wait 60
++feedback-send-timeout 60
++feedback-url https://feedback.mariadb.org/rest/v1/post
++feedback-user-info
++flashback FALSE
++flush FALSE
++flush-time 0
++ft-boolean-syntax + -><()~*:""&|
++ft-max-word-len 84
++ft-min-word-len 4
++ft-query-expansion-limit 20
++ft-stopword-file (No default value)
++gdb FALSE
++general-log FALSE
++general-log-file HOSTNAME.log
++getopt-prefix-matching TRUE
++group-concat-max-len 1048576
++gtid-cleanup-batch-size 64
++gtid-domain-id 0
++gtid-ignore-duplicates FALSE
++gtid-pos-auto-engines
++gtid-strict-mode FALSE
++help TRUE
++histogram-size 254
++histogram-type JSON_HB
++host-cache-size 279
++idle-readonly-transaction-timeout 0
++idle-transaction-timeout 0
++idle-write-transaction-timeout 0
++ignore-builtin-innodb FALSE
++ignore-db-dirs
++in-predicate-conversion-threshold 1000
++init-connect
++init-file (No default value)
++init-rpl-role MASTER
++init-slave
++innodb ON
++innodb-adaptive-flushing TRUE
++innodb-adaptive-flushing-lwm 10
++innodb-adaptive-hash-index FALSE
++innodb-adaptive-hash-index-cells 16381
++innodb-adaptive-hash-index-parts 8
++innodb-alter-copy-bulk TRUE
++innodb-autoextend-increment 64
++innodb-autoinc-lock-mode 1
++innodb-buf-dump-status-frequency 0
++innodb-buffer-page ON
++innodb-buffer-page-lru ON
++innodb-buffer-pool-chunk-size 0
++innodb-buffer-pool-dump-at-shutdown TRUE
++innodb-buffer-pool-dump-now FALSE
++innodb-buffer-pool-dump-pct 25
++innodb-buffer-pool-filename ib_buffer_pool
++innodb-buffer-pool-load-abort FALSE
++innodb-buffer-pool-load-at-startup TRUE
++innodb-buffer-pool-load-now FALSE
++innodb-buffer-pool-size 134217728
++innodb-buffer-pool-size-auto-min 0
++innodb-buffer-pool-size-max 0
++innodb-buffer-pool-stats ON
++innodb-checksum-algorithm full_crc32
++innodb-cmp ON
++innodb-cmp-per-index ON
++innodb-cmp-per-index-enabled FALSE
++innodb-cmp-per-index-reset ON
++innodb-cmp-reset ON
++innodb-cmpmem ON
++innodb-cmpmem-reset ON
++innodb-compression-algorithm zlib
++innodb-compression-default FALSE
++innodb-compression-failure-threshold-pct 5
++innodb-compression-level 6
++innodb-compression-pad-pct-max 50
++innodb-data-file-buffering FALSE
++innodb-data-file-path ibdata1:12M:autoextend
++innodb-data-file-write-through FALSE
++innodb-data-home-dir (No default value)
++innodb-deadlock-detect TRUE
++innodb-deadlock-report full
++innodb-default-encryption-key-id 1
++innodb-default-row-format dynamic
++innodb-disable-sort-file-cache FALSE
++innodb-doublewrite ON
++innodb-encrypt-log FALSE
++innodb-encrypt-tables OFF
++innodb-encrypt-temporary-tables FALSE
++innodb-encryption-rotate-key-age 1
++innodb-encryption-rotation-iops 100
++innodb-encryption-threads 0
++innodb-fast-shutdown 1
++innodb-fatal-semaphore-wait-threshold 600
++innodb-file-per-table TRUE
++innodb-fill-factor 100
++innodb-flush-log-at-timeout 1
++innodb-flush-log-at-trx-commit 1
++innodb-flush-method O_DIRECT
++innodb-flush-neighbors 1
++innodb-flush-sync TRUE
++innodb-flushing-avg-loops 30
++innodb-force-primary-key FALSE
++innodb-force-recovery 0
++innodb-ft-aux-table (No default value)
++innodb-ft-being-deleted ON
++innodb-ft-cache-size 8000000
++innodb-ft-config ON
++innodb-ft-default-stopword ON
++innodb-ft-deleted ON
++innodb-ft-enable-diag-print FALSE
++innodb-ft-enable-stopword TRUE
++innodb-ft-index-cache ON
++innodb-ft-index-table ON
++innodb-ft-max-token-size 84
++innodb-ft-min-token-size 3
++innodb-ft-num-word-optimize 2000
++innodb-ft-result-cache-limit 2000000000
++innodb-ft-server-stopword-table (No default value)
++innodb-ft-sort-pll-degree 2
++innodb-ft-total-cache-size 640000000
++innodb-ft-user-stopword-table (No default value)
++innodb-immediate-scrub-data-uncompressed FALSE
++innodb-instant-alter-column-allowed add_drop_reorder
++innodb-io-capacity 200
++innodb-io-capacity-max 18446744073709551615
++innodb-linux-aio auto
++innodb-lock-wait-timeout 50
++innodb-lock-waits ON
++innodb-locks ON
++innodb-log-buffer-size 16777216
++innodb-log-checkpoint-now FALSE
++innodb-log-file-buffering FALSE
++innodb-log-file-mmap TRUE
++innodb-log-file-size 100663296
++innodb-log-file-write-through FALSE
++innodb-log-group-home-dir (No default value)
++innodb-log-spin-wait-delay 0
++innodb-log-write-ahead-size 512
++innodb-lru-scan-depth 1536
++innodb-max-dirty-pages-pct 90
++innodb-max-dirty-pages-pct-lwm 0
++innodb-max-purge-lag 0
++innodb-max-purge-lag-delay 0
++innodb-max-purge-lag-wait 4294967295
++innodb-max-undo-log-size 10485760
++innodb-metrics ON
++innodb-monitor-disable (No default value)
++innodb-monitor-enable (No default value)
++innodb-monitor-reset (No default value)
++innodb-monitor-reset-all (No default value)
++innodb-numa-interleave FALSE
++innodb-old-blocks-pct 37
++innodb-old-blocks-time 1000
++innodb-online-alter-log-max-size 134217728
++innodb-open-files 0
++innodb-optimize-fulltext-only FALSE
++innodb-page-size 16384
++innodb-prefix-index-cluster-optimization FALSE
++innodb-print-all-deadlocks FALSE
++innodb-purge-batch-size 127
++innodb-purge-threads 4
++innodb-random-read-ahead FALSE
++innodb-read-ahead-threshold 56
++innodb-read-io-threads 4
++innodb-read-only FALSE
++innodb-read-only-compressed FALSE
++innodb-rollback-on-timeout FALSE
++innodb-snapshot-isolation TRUE
++innodb-sort-buffer-size 1048576
++innodb-spin-wait-delay 4
++innodb-stats-auto-recalc TRUE
++innodb-stats-include-delete-marked FALSE
++innodb-stats-method nulls_equal
++innodb-stats-modified-counter 0
++innodb-stats-on-metadata FALSE
++innodb-stats-persistent TRUE
++innodb-stats-persistent-sample-pages 20
++innodb-stats-traditional TRUE
++innodb-stats-transient-sample-pages 8
++innodb-status-file FALSE
++innodb-status-output FALSE
++innodb-status-output-locks FALSE
++innodb-strict-mode TRUE
++innodb-sync-spin-loops 30
++innodb-sys-columns ON
++innodb-sys-fields ON
++innodb-sys-foreign ON
++innodb-sys-foreign-cols ON
++innodb-sys-indexes ON
++innodb-sys-tables ON
++innodb-sys-tablespaces ON
++innodb-sys-tablestats ON
++innodb-sys-virtual ON
++innodb-table-locks TRUE
++innodb-tablespaces-encryption ON
++innodb-temp-data-file-path ibtmp1:12M:autoextend
++innodb-tmpdir (No default value)
++innodb-truncate-temporary-tablespace-now FALSE
++innodb-trx ON
++innodb-undo-directory (No default value)
++innodb-undo-log-truncate FALSE
++innodb-undo-tablespaces 3
++innodb-use-atomic-writes TRUE
++innodb-use-native-aio TRUE
++innodb-write-io-threads 4
++interactive-timeout 28800
++join-buffer-size 262144
++join-buffer-space-limit 2097152
++join-cache-level 2
++keep-files-on-create FALSE
++key-buffer-size 134217728
++key-cache-age-threshold 300
++key-cache-block-size 1024
++key-cache-division-limit 100
++key-cache-file-hash-size 512
++key-cache-segments 0
++large-files-support TRUE
++large-pages FALSE
++lc-messages en_US
++lc-messages-dir (No default value)
++lc-time-names en_US
++local-infile TRUE
++lock-wait-timeout 86400
++log-basename HOSTNAME
++log-bin (No default value)
++log-bin-compress FALSE
++log-bin-compress-min-len 256
++log-bin-index (No default value)
++log-bin-trust-function-creators FALSE
++log-ddl-recovery ddl_recovery.log
++log-disabled-statements sp
++log-error
++log-isam myisam.log
++log-output FILE
++log-queries-not-using-indexes FALSE
++log-short-format FALSE
++log-slave-updates FALSE
++log-slow-admin-statements TRUE
++log-slow-always-query-time 31536000
++log-slow-disabled-statements sp
++log-slow-filter admin,filesort,filesort_on_disk,filesort_priority_queue,full_join,full_scan,query_cache,query_cache_miss,tmp_table,tmp_table_on_disk
++log-slow-max-warnings 10
++log-slow-min-examined-row-limit 0
++log-slow-query FALSE
++log-slow-query-file HOSTNAME-slow.log
++log-slow-query-time 10
++log-slow-rate-limit 1
++log-slow-slave-statements TRUE
++log-slow-verbosity
++log-tc tc.log
++log-tc-size 24576
++log-warnings 2
++long-query-time 10
++low-priority-updates FALSE
++lower-case-file-system FALSE
++lower-case-table-names 0
++master-info-file master.info
++master-retry-count 100000
++master-verify-checksum FALSE
++max-allowed-packet 16777216
++max-binlog-cache-size 18446744073709547520
++max-binlog-size 1073741824
++max-binlog-stmt-cache-size 18446744073709547520
++max-binlog-total-size 0
++max-connect-errors 100
++max-connections 151
++max-delayed-threads 20
++max-digest-length 1024
++max-error-count 64
++max-heap-table-size 16777216
++max-join-size 18446744073709551615
++max-length-for-sort-data 1024
++max-password-errors 4294967295
++max-prepared-stmt-count 16382
++max-recursive-iterations 1000
++max-relay-log-size 1073741824
++max-rowid-filter-size 131072
++max-seeks-for-key 4294967295
++max-session-mem-used 9223372036854775807
++max-sort-length 1024
++max-sp-recursion-depth 0
++max-statement-time 0
++max-tmp-session-space-usage 1099511627776
++max-tmp-total-space-usage 1099511627776
++max-user-connections 0
++max-write-lock-count 4294967295
++memlock FALSE
++metadata-locks-cache-size 1024
++metadata-locks-hash-instances 8
++mhnsw-default-distance euclidean
++mhnsw-default-m 6
++mhnsw-ef-search 20
++mhnsw-max-cache-size 16777216
++min-examined-row-limit 0
++mrr-buffer-size 262144
++myisam-block-size 1024
++myisam-data-pointer-size 6
++myisam-max-sort-file-size 18446744073709551615
++myisam-mmap-size 9223372036853727232
++myisam-recover-options BACKUP,QUICK
++myisam-repair-threads 1
++myisam-sort-buffer-size 134216704
++myisam-stats-method NULLS_UNEQUAL
++myisam-use-mmap FALSE
++mysql56-temporal-format TRUE
++net-buffer-length 16384
++net-read-timeout 30
++net-retry-count 10
++net-write-timeout 60
++new-mode
++note-verbosity basic,explain
++old FALSE
++old-mode UTF8_IS_UTF8MB3
++old-passwords FALSE
++old-style-user-limits FALSE
++open-files-limit 32000
++optimizer-adjust-secondary-key-costs 0
++optimizer-disk-read-cost 10.24
++optimizer-disk-read-ratio 0.02
++optimizer-extra-pruning-depth 8
++optimizer-index-block-copy-cost 0.0356
++optimizer-join-limit-pref-ratio 0
++optimizer-key-compare-cost 0.011361
++optimizer-key-copy-cost 0.015685
++optimizer-key-lookup-cost 0.435777
++optimizer-key-next-find-cost 0.082347
++optimizer-max-sel-arg-weight 32000
++optimizer-max-sel-args 16000
++optimizer-prune-level 2
++optimizer-row-copy-cost 0.060866
++optimizer-row-lookup-cost 0.130839
++optimizer-row-next-find-cost 0.045916
++optimizer-rowid-compare-cost 0.002653
++optimizer-rowid-copy-cost 0.002653
++optimizer-scan-setup-cost 10
++optimizer-search-depth 62
++optimizer-selectivity-sampling-limit 100
++optimizer-switch index_merge=on,index_merge_union=on,index_merge_sort_union=on,index_merge_intersection=on,index_merge_sort_intersection=off,index_condition_pushdown=on,derived_merge=on,derived_with_keys=on,firstmatch=on,loosescan=on,materialization=on,in_to_exists=on,semijoin=on,partial_match_rowid_merge=on,partial_match_table_scan=on,subquery_cache=on,mrr=off,mrr_cost_based=off,mrr_sort_keys=off,outer_join_with_cache=on,semijoin_with_cache=on,join_cache_incremental=on,join_cache_hashed=on,join_cache_bka=on,optimize_join_buffer_size=on,table_elimination=on,extended_keys=on,exists_to_in=on,orderby_uses_equalities=on,condition_pushdown_for_derived=on,split_materialized=on,condition_pushdown_for_subquery=on,rowid_filter=on,condition_pushdown_from_having=on,not_null_range_scan=off,hash_join_cardinality=on,cset_narrowing=on,sargable_casefold=on
++optimizer-trace
++optimizer-trace-max-mem-size 1048576
++optimizer-use-condition-selectivity 4
++optimizer-where-cost 0.032
++partition ON
++performance-schema FALSE
++performance-schema-accounts-size -1
++performance-schema-consumer-events-stages-current FALSE
++performance-schema-consumer-events-stages-history FALSE
++performance-schema-consumer-events-stages-history-long FALSE
++performance-schema-consumer-events-statements-current FALSE
++performance-schema-consumer-events-statements-history FALSE
++performance-schema-consumer-events-statements-history-long FALSE
++performance-schema-consumer-events-transactions-current FALSE
++performance-schema-consumer-events-transactions-history FALSE
++performance-schema-consumer-events-transactions-history-long FALSE
++performance-schema-consumer-events-waits-current FALSE
++performance-schema-consumer-events-waits-history FALSE
++performance-schema-consumer-events-waits-history-long FALSE
++performance-schema-consumer-global-instrumentation TRUE
++performance-schema-consumer-statements-digest TRUE
++performance-schema-consumer-thread-instrumentation TRUE
++performance-schema-digests-size -1
++performance-schema-events-stages-history-long-size -1
++performance-schema-events-stages-history-size -1
++performance-schema-events-statements-history-long-size -1
++performance-schema-events-statements-history-size -1
++performance-schema-events-transactions-history-long-size -1
++performance-schema-events-transactions-history-size -1
++performance-schema-events-waits-history-long-size -1
++performance-schema-events-waits-history-size -1
++performance-schema-hosts-size -1
++performance-schema-instrument
++performance-schema-max-cond-classes 90
++performance-schema-max-cond-instances -1
++performance-schema-max-digest-length 1024
++performance-schema-max-file-classes 80
++performance-schema-max-file-handles 32768
++performance-schema-max-file-instances -1
++performance-schema-max-index-stat -1
++performance-schema-max-memory-classes 320
++performance-schema-max-metadata-locks -1
++performance-schema-max-mutex-classes 210
++performance-schema-max-mutex-instances -1
++performance-schema-max-prepared-statements-instances -1
++performance-schema-max-program-instances -1
++performance-schema-max-rwlock-classes 50
++performance-schema-max-rwlock-instances -1
++performance-schema-max-socket-classes 10
++performance-schema-max-socket-instances -1
++performance-schema-max-sql-text-length 1024
++performance-schema-max-stage-classes 160
++performance-schema-max-statement-classes 223
++performance-schema-max-statement-stack 10
++performance-schema-max-table-handles -1
++performance-schema-max-table-instances -1
++performance-schema-max-table-lock-stat -1
++performance-schema-max-thread-classes 50
++performance-schema-max-thread-instances -1
++performance-schema-session-connect-attrs-size -1
++performance-schema-setup-actors-size -1
++performance-schema-setup-objects-size -1
++performance-schema-users-size -1
++pid-file /run/mysqld/mysqld.pid
++plugin-dir /usr/lib/mysql/plugin/
++plugin-maturity gamma
++port 3306
++port-open-timeout 0
++preload-buffer-size 32768
++profiling-history-size 15
++progress-report-time 5
++protocol-version 10
++proxy-protocol-networks
++query-alloc-block-size 32768
++query-cache-limit 1048576
++query-cache-min-res-unit 4096
++query-cache-size 1048576
++query-cache-strip-comments FALSE
++query-cache-type OFF
++query-cache-wlock-invalidate FALSE
++query-prealloc-size 32768
++range-alloc-block-size 4096
++read-binlog-speed-limit 0
++read-buffer-size 131072
++read-only FALSE
++read-rnd-buffer-size 262144
++redirect-url
++relay-log (No default value)
++relay-log-index (No default value)
++relay-log-info-file relay-log.info
++relay-log-purge TRUE
++relay-log-recovery FALSE
++relay-log-space-limit 0
++replicate-annotate-row-events TRUE
++replicate-events-marked-for-skip REPLICATE
++replicate-same-server-id FALSE
++report-host (No default value)
++report-password (No default value)
++report-port 0
++report-user (No default value)
++require-secure-transport FALSE
++rowid-merge-buff-size 8388608
++rpl-semi-sync-master-enabled FALSE
++rpl-semi-sync-master-timeout 10000
++rpl-semi-sync-master-trace-level 32
++rpl-semi-sync-master-wait-no-slave TRUE
++rpl-semi-sync-master-wait-point AFTER_COMMIT
++rpl-semi-sync-slave-delay-master FALSE
++rpl-semi-sync-slave-enabled FALSE
++rpl-semi-sync-slave-kill-conn-timeout 5
++rpl-semi-sync-slave-trace-level 32
++safe-user-create FALSE
++secure-auth TRUE
++secure-file-priv (No default value)
++secure-timestamp NO
++sequence ON
++server-id 1
++server-uid 1234567890abcdefghijklmnopq=
++session-track-schema TRUE
++session-track-state-change FALSE
++session-track-system-variables autocommit,character_set_client,character_set_connection,character_set_results,redirect_url,time_zone
++session-track-transaction-info OFF
++show-slave-auth-info FALSE
++silent-startup FALSE
++skip-grant-tables FALSE
++skip-name-resolve FALSE
++skip-networking FALSE
++skip-show-database FALSE
++skip-slave-start FALSE
++slave-abort-blocking-timeout 31536000
++slave-compressed-protocol FALSE
++slave-connections-needed-for-purge 1
++slave-ddl-exec-mode IDEMPOTENT
++slave-domain-parallel-threads 0
++slave-exec-mode STRICT
++slave-load-tmpdir /tmp
++slave-max-allowed-packet 1073741824
++slave-max-statement-time 0
++slave-net-timeout 60
++slave-parallel-max-queued 131072
++slave-parallel-mode conservative
++slave-parallel-threads 0
++slave-parallel-workers 0
++slave-run-triggers-for-rbr NO
++slave-skip-errors OFF
++slave-sql-verify-checksum TRUE
++slave-transaction-retries 10
++slave-transaction-retry-errors 1158,1159,1160,1161,1205,1213,1020,1429,2013,12701
++slave-transaction-retry-interval 0
++slave-type-conversions
++slow-launch-time 2
++slow-query-log FALSE
++slow-query-log-file HOSTNAME-slow.log
++socket /run/mysqld/mysqld.sock
++sort-buffer-size 2097152
++sql-mode STRICT_TRANS_TABLES,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION
++sql-safe-updates FALSE
++ssl TRUE
++ssl-ca (No default value)
++ssl-capath (No default value)
++ssl-cert (No default value)
++ssl-cipher (No default value)
++ssl-crl (No default value)
++ssl-crlpath (No default value)
++ssl-key (No default value)
++stack-trace TRUE
++standard-compliant-cte TRUE
++stored-program-cache 256
++strict-password-validation TRUE
++symbolic-links TRUE
++sync-binlog 0
++sync-frm TRUE
++sync-master-info 10000
++sync-relay-log 10000
++sync-relay-log-info 10000
++sysdate-is-now FALSE
++system-time-zone UTC
++system-versioning-alter-history ERROR
++system-versioning-insert-history FALSE
++table-cache 2000
++table-definition-cache 400
++table-open-cache 2000
++table-open-cache-instances 8
++tc-heuristic-recover OFF
++tcp-keepalive-interval 0
++tcp-keepalive-probes 0
++tcp-keepalive-time 0
++tcp-nodelay TRUE
++temp-pool FALSE
++thread-cache-size 151
++thread-handling one-thread-per-connection
++thread-pool-dedicated-listener FALSE
++thread-pool-exact-stats FALSE
++thread-pool-groups ON
++thread-pool-idle-timeout 60
++thread-pool-max-threads 65536
++thread-pool-oversubscribe 3
++thread-pool-prio-kickup-timer 1000
++thread-pool-priority auto
++thread-pool-queues ON
++thread-pool-size 2
++thread-pool-stall-limit 500
++thread-pool-stats ON
++thread-pool-waits ON
++thread-stack 299008
++tls-version TLSv1.2,TLSv1.3
++tmp-disk-table-size 18446744073709551615
++tmp-memory-table-size 16777216
++tmp-table-size 16777216
++tmpdir /tmp
++transaction-alloc-block-size 8192
++transaction-isolation REPEATABLE-READ
++transaction-prealloc-size 4096
++transaction-read-only FALSE
++unix-socket ON
++updatable-views-with-limit YES
++use-stat-tables PREFERABLY_FOR_QUERIES
++user-variables ON
++userstat FALSE
++verbose TRUE
++version VERSION
++version-comment VERSION-COMMENT
++version-compile-machine ARCH
++version-compile-os debian-linux-gnu
++version-malloc-library system
++version-source-revision -
++version-ssl-library SSL-VERSION
++wait-timeout 28800
++wsrep-OSU-method TOI
++wsrep-SR-store table
++wsrep-allowlist
++wsrep-auto-increment-control TRUE
++wsrep-certification-rules strict
++wsrep-certify-nonPK TRUE
++wsrep-cluster-address
++wsrep-cluster-name my_wsrep_cluster
++wsrep-convert-LOCK-to-trx FALSE
++wsrep-data-home-dir /var/lib/mysql/
++wsrep-dbug-option
++wsrep-debug NONE
++wsrep-desync FALSE
++wsrep-dirty-reads FALSE
++wsrep-drupal-282555-workaround FALSE
++wsrep-forced-binlog-format NONE
++wsrep-gtid-domain-id 0
++wsrep-gtid-mode FALSE
++wsrep-ignore-apply-errors 7
++wsrep-log-conflicts FALSE
++wsrep-max-ws-rows 0
++wsrep-max-ws-size 2147483647
++wsrep-mode
++wsrep-mysql-replication-bundle 0
++wsrep-new-cluster FALSE
++wsrep-node-address
++wsrep-node-incoming-address AUTO
++wsrep-node-name HOSTNAME
++wsrep-notify-cmd
++wsrep-on FALSE
++wsrep-patch-version wsrep_26.22
++wsrep-provider none
++wsrep-provider-options
++wsrep-recover FALSE
++wsrep-reject-queries NONE
++wsrep-restart-slave FALSE
++wsrep-retry-autocommit 1
++wsrep-slave-FK-checks TRUE
++wsrep-slave-UK-checks FALSE
++wsrep-slave-threads 1
++wsrep-sst-auth (No default value)
++wsrep-sst-donor
++wsrep-sst-donor-rejects-queries FALSE
++wsrep-sst-method rsync
++wsrep-sst-receive-address AUTO
++wsrep-start-position 00000000-0000-0000-0000-000000000000:-1
++wsrep-status-file
++wsrep-sync-wait 0
++wsrep-trx-fragment-size 0
++wsrep-trx-fragment-unit bytes
++
++To see what variables a running server is using, type
++'SELECT * FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES' instead of 'mariadbd --verbose --help'.
--- /dev/null
- # Also use the arch specific skiplists if exist
+#!/bin/sh
+# autopkgtest check: Build and run the upstream test suite.
+# (C) 2012 Canonical Ltd.
+# Author: Daniel Kessel <d.kessel@gmx.de>
+
+# running the mysql testsuite as described in:
+# https://bugs.launchpad.net/ubuntu/+source/mysql-5.5/+bug/959683
+
+echo "Running test 'testsuite'"
+set -e
+
+MTR_SKIP_TEST_LIST=$(mktemp)
+ARCH=$(dpkg --print-architecture)
+
+WORKDIR=$(mktemp -d)
+trap 'rm -rf $WORKDIR $MTR_SKIP_TEST_LIST' 0 INT QUIT ABRT PIPE TERM
+cd "$WORKDIR"
+
+mkdir var
+mkdir tmp
+
+echo "using vardir: $WORKDIR/var"
+echo "using tmpdir: $WORKDIR/tmp"
+
+echo "Setting up skip-tests-list"
+
- cat "/usr/share/mariadb/mariadb-test/unstable-tests.$ARCH" >> "$SKIP_TEST_LST"
++# Use the arch specific skiplists if exist, otherwise list is empty
+if [ -f "/usr/share/mariadb/mariadb-test/unstable-tests.$ARCH" ]
+then
- if [ "$ARCH" = "s390x" ]
- then
- echo "main.func_regexp_pcre : recursion fails on s390x https://bugs.launchpad.net/ubuntu/+source/mariadb-10.1/+bug/1723947" >> "$MTR_SKIP_TEST_LIST"
- elif [ "$ARCH" = "armhf" ] || [ "$ARCH" = "i386" ]
- then
- echo "main.failed_auth_unixsocket : Test returns wrong exit code on armhf and i386 (but only in debci) https://jira.mariadb.org/browse/MDEV-23933" >> "$MTR_SKIP_TEST_LIST"
- fi
-
++ cat "/usr/share/mariadb/mariadb-test/unstable-tests.$ARCH" >> "$MTR_SKIP_TEST_LIST"
+fi
+
+# Skip tests that cannot run properly on ci.debian.net / autopkgtests.ubuntu.com
+cat >> "$MTR_SKIP_TEST_LIST" << EOF
+binlog.binlog_server_start_options : Requires writable /usr
+main.ctype_uca : Requires writable /usr
+rpl.rpl_gtid_mode : Requires starting server as root ref http://bugs.mysql.com/bug.php?id=70517
+EOF
+
+# Skip tests that cannot run properly on Gitlab-CI
+if [ -n "$GITLAB_CI" ]
+then
+ cat >> "$MTR_SKIP_TEST_LIST" << EOF
+main.mysqld--help : For unknown reason table-cache is 4000 instead of default 421
+EOF
+fi
+
- cd /usr/share/mysql/mysql-test
- echo "starting mariadb-test-tun.pl..."
+# Store skipped test list in artifacts so it can be viewed while debugging
+# failed autopkgtest runs
+cp -v "$MTR_SKIP_TEST_LIST" "$AUTOPKGTEST_ARTIFACTS"
+
- --verbose-restart --max-save-core=1 --max-save-datadir=1 \
++cd /usr/share/mariadb/mariadb-test
++echo "starting mariadb-test-run.pl..."
+export MTR_PRINT_CORE=detailed
+# The $MTR_ARGUMENTS_APPEND is intentionally used to pass in extra arguments
+# shellcheck disable=SC2086
+eatmydata perl -I. ./mariadb-test-run.pl \
+ --force --testcase-timeout=120 --suite-timeout=540 --retry=3 \
++ --max-test-fail=30 --max-save-core=1 --max-save-datadir=1 \
+ --parallel=auto --skip-rpl --suite=main \
+ --skip-test-list="$MTR_SKIP_TEST_LIST" \
+ --vardir="$WORKDIR/var" --tmpdir="$WORKDIR/tmp" \
+ --xml-report="$AUTOPKGTEST_ARTIFACTS/mariadb-test-run-junit.xml" \
+ $MTR_ARGUMENTS_APPEND \
+ "$@" 2>&1
+echo "run: OK"
--- /dev/null
--- /dev/null
++# Below tests only run in "big" tests
++disks.disks : MDEV-38335 (fails only on Debian buildd)
++disks.disks_notembedded : MDEV-38335 (fails only on Debian buildd)
--- /dev/null
--- /dev/null
++# Failed on Launchpad amd64v3 builds
++main.gis : MDEV-38398
++main.ctype_utf16le : MDEV-38398
++# Below tests only run in "big" tests
++disks.disks : MDEV-38335 (fails only on Debian buildd)
++disks.disks_notembedded : MDEV-38335 (fails only on Debian buildd)
--- /dev/null
--- /dev/null
++# Below tests only run in "big" tests
++binlog.flashback-largebinlog : MDEV-32352 crashes server on Debian CI amd64 and arm64 runner
++disks.disks : MDEV-38335 (fails only on Debian buildd)
++disks.disks_notembedded : MDEV-38335 (fails only on Debian buildd)
++innodb.gap_locks : MDEV-37862 (fails only on Debian buildd)
++main.mysql_client_test_nonblock : MDEV-36109 (fails only on Launchpad)
++unit.conc_async : CONC-759 (fails only on Launchpad)
--- /dev/null
--- /dev/null
++# The armhf architecture was removed from Debian in November 2025
++# https://lists.debian.org/debian-devel-announce/2025/11/msg00001.html
--- /dev/null
--- /dev/null
++main.xml : MDEV-21968 (fails only on Launchpad)
++# Below tests only run in "big" tests
++compat/oracle.sp-package : MDEV-38340 (fails only on Launchpad)
++disks.disks : MDEV-38335 (fails only on Debian buildd)
++disks.disks_notembedded : MDEV-38335 (fails only on Debian buildd)
++mroonga/storage.column_datetime_32bit_2038 : MDEV-38286
++mroonga/storage.column_datetime_32bit_before_unix_epoch : MDEV-38286
++mroonga/storage.column_datetime_32bit_max : MDEV-38286
++mroonga/storage.column_datetime_32bit_out_of_range : MDEV-38286
++mroonga/storage.index_multiple_column_unique_date_32bit_equal : MDEV-38286
++mroonga/storage.index_multiple_column_unique_date_order_32bit_asc : MDEV-38286
++mroonga/storage.index_multiple_column_unique_date_order_32bit_desc : MDEV-38286
++mroonga/storage.index_multiple_column_unique_year_32bit_equal : MDEV-38286
++mroonga/storage.index_multiple_column_unique_year_order_32bit_asc : MDEV-38286
++mroonga/storage.index_multiple_column_unique_year_order_32bit_desc : MDEV-38286
++spider.basic_sql : MDEV-33381 (fails only on Launchpad)
++spider.spider_fixes_part : MDEV-33381 (fails only on Launchpad)
++spider/bg.basic_sql : MDEV-33381 (fails only on Launchpad)
++spider/bg.spider_fixes_part : MDEV-33381 (fails only on Launchpad)
++spider/bugfix.mdev_24517 : MDEV-33381 (fails only on Launchpad)
++unit.aes : MDEV-38341 (fails only on Launchpad)
--- /dev/null
--- /dev/null
++main.analyze_engine_stats : MDEV-32375 (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1053487)
++main.analyze_stmt_orderby : MDEV-32375 (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1053487)
++main.analyze_stmt_slow_query_log : MDEV-12237
++main.cte_recursive : MDEV-32375 (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1053487)
++main.derived_split_innodb : MDEV-32375 (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1053487)
++main.explain_json_format_partitions : MDEV-32375 (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1053487)
++main.join_cache_notasan : MDEV-34084
++main.rowid_filter_innodb : MDEV-32375 (now runs only in debug build)
++# Below tests only run in "big" tests
++binlog.flashback-largebinlog : Out of memory (Needed 1073742848 bytes)
++innodb_fts.misc_1 : MDEV-38343
++innodb_fts.phrase : MDEV-38343
++mariabackup.incremental_encrypted : Can't allocate 1073741824 bytes
++repair_symlink-5543 : MDEV-23920
++rpl.rpl_change_master_demote : MDEV-38338 At line 88 Explicit --die command executed
++spider.partition_mrr : Result content mismatch
++spider.quick_mode_0 : Result content mismatch
++spider.quick_mode_1 : Result content mismatch
++spider/feature.checksum_table_parallel_extended : Result content mismatch
++# Seems also that the hppa runner will time out after ~2000 tests and never finish
--- /dev/null
--- /dev/null
++# MDEV-8535: auth_socket does not build on hurd-i368
--- /dev/null
--- /dev/null
++# Hurd-i386 completes the compilation phase, but all tests fail on:
++# Warning: Internal memory accounting error of 3504 bytes
++# (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1074561)
--- /dev/null
--- /dev/null
++# Below tests only run in "big" tests
++disks.disks : MDEV-38335 (fails only on Debian buildd)
++disks.disks_notembedded : MDEV-38335 (fails only on Debian buildd)
--- /dev/null
--- /dev/null
++# Below tests only run in "big" tests
++disks.disks : MDEV-38335 (fails only on Debian buildd)
++disks.disks_notembedded : MDEV-38335 (fails only on Debian buildd)
++main.vector_innodb : MDEV-38267 (sporadic)
++main.vector2_notembedded : MDEV-38267 (sporadic)
++rpl.rpl_skip_replication : MDEV-38334 (sporadic)
--- /dev/null
--- /dev/null
++# The m68k build on Debian runs in a qemu builder and has
++# DEB_BUILD_OPTIONS="nobench nocheck" defined, so *all* tests are skipped
++# intentionally (Bug#972057)
++#
++# When forced to run some tests pass, e.g.:
++# main.connect w2 [ pass ] 17388
++# main.pool_of_threads w1 [ pass ] 110779
++# binlog.binlog_row_annotate 'row' w1 [ pass ] 11558
++# binlog.max_binlog_total_size 'mix' w1 [ pass ] 449
++# ..but the majority of tests fail
--- /dev/null
--- /dev/null
++# The mips64el architecture was removed from Debian in November 2025
++# https://lists.debian.org/debian-devel-announce/2025/11/msg00001.html
--- /dev/null
--- /dev/null
++# Below tests only run in "big" tests
++disks.disks : MDEV-38335 (fails only on Debian buildd)
++disks.disks_notembedded : MDEV-38335 (fails only on Debian buildd)
++innodb_fts.basic : MDEV-38343
++innodb_fts.fulltext : MDEV-38343
++innodb_fts.innodb_fts_large_records : MDEV-38343
++innodb_fts.innodb_fts_misc_1 : MDEV-38343
++innodb_fts.innodb_fts_multiple_index : MDEV-38343
++innodb_fts.innodb_fts_proximity : MDEV-38343
++innodb_fts.misc : MDEV-38343
++innodb_fts.misc_1 : MDEV-38343
++innodb_fts.multiple_index : MDEV-38343
++innodb_fts.opt : MDEV-38343
++innodb_fts.phrase : MDEV-38343
++rpl.rpl_change_master_demote : MDEV-38338 At line 88 Explicit --die command executed
++sys_vars.sysvars_wsrep : MDEV-38342 Empty DEFAULT value
--- /dev/null
--- /dev/null
++# Below tests only run in "big" tests
++disks.disks : MDEV-38335 (fails only on Debian buildd)
++disks.disks_notembedded : MDEV-38335 (fails only on Debian buildd)
--- /dev/null
--- /dev/null
++# Below tests only run in "big" tests
++disks.disks : MDEV-38335 (fails only on Debian buildd)
++disks.disks_notembedded : MDEV-38335 (fails only on Debian buildd)
++main.vector_innodb : MDEV-38267 (sporadic)
++main.vector2_notembedded : MDEV-38267 (sporadic)
--- /dev/null
--- /dev/null
++# Below tests only run in "big" tests
--- /dev/null
--- /dev/null
++# Below tests only run in "big" tests
++disks.disks : MDEV-38335 (fails only on Debian buildd)
++disks.disks_notembedded : MDEV-38335 (fails only on Debian buildd)
--- /dev/null
--- /dev/null
++# The sh4 build on Debian runs in a qemu builder and has
++# DEB_BUILD_OPTIONS="nobench nocheck" defined, so *all* tests are skipped
++# intentionally (Bug#972057)
--- /dev/null
--- /dev/null
++main.check : MDEV-36670 (sporadic)
++main.ctype_binary : MDEV-36652 (https://bugs.debian.org/1053485)
++main.ctype_latin1 : MDEV-36652 (https://bugs.debian.org/1053485)
++main.features : MDEV-27954
++main.func_like : MDEV-27954
++main.func_math : MDEV-27954
++main.func_str : MDEV-27954
++main.group_by : MDEV-27954 (passed in MariaDB 11.8.5, sporadic?)
++main.group_by_null : MDEV-27954
++main.long_unique_bugs : MDEV-30928
++main.long_unique_innodb : MDEV-30928
++main.mariadb-import : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.partition : MDEV-27954
++main.partition_icp : MDEV-36669/MDEV-36652
++main.partition_order : MDEV-27954
++main.repair_symlink-5543 : MDEV-23920
++main.sp-innodb : MDEV-36670
++main.type_datetime : MDEV-27954
++main.unsafe_binlog_innodb : MDEV-36670
++main.vector : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.vector_aria : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.vector_funcs : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.vector_innodb : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.vector2 : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.vector2_notembedded : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.view : MDEV-36145 (https://bugs.debian.org/1098651)
++main.xml : MDEV-21968
++# Below tests only run in "big" tests
++binlog_encryption.encrypted_slave : MDEV-23905
++binlog_encryption.encrypted_master : MDEV-23905
++# Lots of tests fails, this would need a sparc64 expert to spend more time on
++# Completed: Failed 148/6460 tests, 97.71% were successful.
--- /dev/null
--- /dev/null
++main.mariadb-import : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.vector : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.vector_funcs : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.vector_innodb : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.vector2 : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++main.vector2_notembedded : MDEV-36670 Multiple vector related tests crash under sparc64 and x32
++# Below tests only run in "big" tests
++mariabackup.vector : MDEV-36670
++mroonga/storage.column_datetime_32bit_2038 : MDEV-38333
++mroonga/storage.column_datetime_32bit_before_unix_epoch : MDEV-38333
++mroonga/storage.column_datetime_32bit_max : MDEV-38333
++# Lots of tests fails, this would need a x32 expert to spend more time on
++# Completed: Failed 38/7051 tests, 99.46% were successful.
--- /dev/null
--- /dev/null
++Bug-Database: https://jira.mariadb.org
++Bug-Submit: https://jira.mariadb.org
++Donation: https://mariadb.org/donate/
++Repository: https://github.com/MariaDB/server.git
++Repository-Browse: https://github.com/MariaDB/server
++Security-Contact: security@mariadb.org
--- /dev/null
--- /dev/null
++-----BEGIN PGP PUBLIC KEY BLOCK-----
++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++=ihRo
++-----END PGP PUBLIC KEY BLOCK-----
--- /dev/null
--- /dev/null
++Version: 5
++
++Source: https://archive.mariadb.org/mariadb-11.8.([\d\.]*(?:-beta|-rc)?)/source/
++Matching-Pattern: mariadb-([\d\.]*(?:-beta|-rc)?).tar.gz
++Pgp-Sig-Url-Mangle: s/$/.asc/
++Uversion-Mangle: s/-(rc|beta)/$1/
++
++# String "-11.8." needs to be in path as MariaDB releases several series in
++# parallel (e.g 11.4, 10.11, 10.4, 10.3 etc) and uscan should check for updates
++# only in the 11.8-series.
++#
++# Specifically use archive.mariadb.org because it supports https and the main
++# page has a file listing suitable for scanning new releases.
++# The archive.mariadb.org service is under MariaDB Foundation control and is the
++# official source for new releases.
projects / mariadb.git / commitdiff